What Is Used To Pump Septic Tank? (Solved)

Use a Grinder pump. These septic tank pumps are used to grind and move black water or sewage from place to place, grinding the solids to enable everything to fit through standard piping (usually 2” diameter). Typically, the grinder pump is installed right in a septic tank.

submersible effluent pump is us septic tank effluent pump system. In a septic tank system the pump is located in a separate chamber. The sewage sinks to the bottom and is eventually pumped out by a sewage removal truck. When the gray water reaches a certain level it flows into the second part of the treatment system. This gray water is then pumped out into a leach field or the town’s sewage system (See Figure 1).

What kind of pump is used in a septic tank?

Effluent pumps are typically used to pump grey-water from a septic tank to a leach field. For raw sewage, a sewage pump or grinder pump is recommended to prevent clogging from handling solids larger than 3/4″ in width.

How is a septic tank pumped out?

How Are Septic Tanks Pumped? When you hire a company to pump your septic tank, they will likely come with a large truck with a giant tank. Attached to this truck is a giant suction hose that literally sucks up the waste from your septic tank once it is opened.

Can you pump your septic tank yourself?

Technically, you can clean a septic tank yourself. However, professionals do not recommend that you do so. A professional has the tools needed to properly pump your tank. A professional also has the knowledge and training to remove all of the waste from your tank and dispose of it properly.

Can water pump be used for septic tank?

Waste and sewage is removed from a septic tank into the drain field either through gravity or with the help of a septic system lift pump. Pumps are usually necessary for septic tanks that sit lower than the drain field and gravity is unable to carry and/or push the effluent out of the tank.

Can I use a sump pump in my septic tank?

A: No. If you have a septic system, under no circumstances should the sump be pumped into the basement floor drain. Adding to the flow with a sump pump can damage the septic system. Even if you are connected to a public sanitary system, the sump should not be pumped into a floor drain.

Do all septic tanks have pumps?

Septic Systems Rely on Gravity, Most of the Time For that to work, a pump is needed, or sometimes two pumps. If the tank is higher than the house, a grinder pump that liquefies solids will be placed in a pit in the home’s basement or crawlspace.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

Your Drains Are Taking Forever.
Standing Water Over Your Septic Tank.

Bad Smells Coming From Your Yard.
You Hear Gurgling Water.
You Have A Sewage Backup.

How often should you empty your septic tank?

How do I know when to pump my septic tank?

If the bottom of the scum layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the outlet, your tank needs to be pumped. To keep track of when to pump out your tank, write down the sludge and scum levels found by the septic professional.

How do I prepare my septic tank for pumping?

3 Ways to Prepare for Septic Tank Pumping

Keep a Record of Septic Tank Maintenance. We recommend you keep track of all septic tank maintenance, service, and repairs that have been conducted since you’ve lived in the home.
Locate System Components.
Clear Away All Debris.

Choose Curt & Jerry for Septic Tank Pumping.

How do I clean my septic tank naturally?

You can mix about a 1/4 cup of baking soda with 1/2 cup of vinegar and 2 tablespoons lemon to make your own natural cleaning agent. The baking soda will fizz up to help get the dirt and grime in your tub and drains. It’s a great cleaner and your septic system will thank you!

How much does it cost to pump a septic tank?

How much does it cost to pump out a septic tank? The average cost is $300, but can run up to $500, depending on your location. The tank should be pumped out every three to five years.

How do you dissolve sludge in a septic tank?

How to Reduce Sludge in a Septic Tank Without Pumping

Install an aeration system with diffused air in your septic tank.
Break up any compacted sludge.

Add a bio-activator or microbe blend.
Maintain the aeration system.
Add additional Microbes as required.

How far can you pump septic?

Sewage ejector pumps are designed to pump raw sewage from your home into a septic tank or gravity flow sewer main. For this reason, they can only pump to distances under 750 feet. However, a benefit of sewage ejector pumps is that they are built to move up to 200 gallons per minute of raw sewage.

How to Care for Your Septic Tank

Septic systems are built in around one-fourth of all residences in the United States, and they are particularly common in rural regions that are not served by municipal sewer systems. In contrast to conventional sewage systems, which pump solid and liquid waste from the home into sewer mains and then to a centralized sewage treatment plant, septic systems pump waste from the house out into a drain field and an underground septic tank.

How Septic System Works

The water and wastes carried by the water in a standard septic system go down the home’s drain system and through a single main sewer pipe to the septic tank, where they are treated. It is possible for wastewater to flow only by gravity or with the aid of an electric pump. However, this is not always the case. The septic tank is designed to store waste material for an extended period of time, allowing solids to sink to the bottom while oil, grease, and liquids – later known as scum — float to the top.

As bacterial activity breaks down the pathogens, the liquids slowly trickle down through the soil and into the groundwater.

Between times, the solids in the tank degrade under the influence of anaerobic bacteria and form an oily substance that settles at the bottom of the tank.

If the bacterial action is efficient, the volume of these solid wastes is significantly decreased as they decompose.

Anatomy of a Septic Tank

The septic tank is a water-tight container constructed of concrete, fiberglass, or polyethylene that is placed in the ground in a location close to the house to collect waste. It is comprised of an entrance pipe through which all waste from the home’s sewage line is directed into the tank and an output pipe through which liquids are directed to the drain field. Unless you look closely, the top of the tank is buried just below the level of the earth and is completely inaccessible except for one or two inspection tubes and a manhole cover, which is used to pump sludge from the tank when it becomes required.

When to Have Your Septic Tank Pumped

An inspection of a septic tank should be performed every two to three years, with mechanical pumping necessary every three to five years to empty the tank, according to the Environmental Protection Agency (EPA). Pumping may be required on a yearly basis for systems that are inadequate or that receive a lot of demand. System components such as electrical float switches, pumps, and mechanical components must be examined more frequently, generally once a year, in certain cases. When you pump your septic tank, you’re getting rid of sludge from the bottom of the tank, and you need to do it as soon as possible since sludge can build up to the point where it stops the outflow pipe, which allows liquids to flow into the drain field.

The frequency with which this must be done is determined by a number of factors, including:

Typical for larger houses, waste generation increases, causing the septic tank to fill up more quickly

Size of the household The amount of wastewater produced is as follows: If there is an excessive amount of wastewater going into the septic tank, it might have an impact on how quickly the tank fills. The amount of particles included in the wastewater is as follows: Households with a large number of toilets or who often use garbage disposals have a tendency to fill their septic tanks more quickly. Septic tank capacity: Larger tanks can retain more solid sludge and, as a result, will need to be pumped less frequently.

There are a few methods that might assist you in estimating when you should have your tank pumped. For example, a typical four-bedroom house may have a 1,200 to 1,500 gallon tank, and if you have a family of four, you may expect to have the tank pumped every 3 to 5 years under normal circumstances.

How a Septic Tank Is Pumped

The expert who inspects and services your septic tank will notify you when it is necessary to pump out the sludge from the tank, if you have a septic service professional who does so on a regular basis. This occurs when the floating scum layer that exists between the sludge and the floating water is within approximately 6 inches of the outflow pipe leading to the drain field. Septic service specialists arrive in a huge tanker truck with vacuum equipment, and when the lid has been removed from the septic tank, they introduce a large hose into the tank through the manhole they have created.

This helps to break up the particles and mix them with the liquid material, which helps the pumping process run more efficiently.

Tips for Maintaining Septic System

There are various proactive actions you can take to ensure that your septic system runs properly and that the frequency with which it must be pumped is reduced. These include the following:

Reduce your water use. Utilizing toilets and faucets with high water efficiency and water conservation may significantly reduce the quantity of water that enters the septic system and causes it to backup. Water leaks and drips should be repaired as soon as possible in order to avoid misuse of water, which can lead to the septic tank filling up faster. Reduce the amount of solid trash produced: Another technique to ensure that the septic system is operating correctly is to keep track of the solid waste that enters it. Trash that is either washed down the drain or flushed down the toilet can cause the septic system to become overburdened. Other than toilet paper, don’t flush anything down the toilet. Also, avoid utilizing a trash disposer that dumps organic food wastes into the septic system, which might cause problems. Even though it takes just a small amount of work, throwing things in the trash makes a significant impact in how well the septic system is managed. Rainwater should be directed away from the drain field. Rain gutters and landscaping grading that direct water into the septic system’s drain field can impair the field’s capacity to distribute water from the septic system.

Hot tubs should not be drained into the sewer system. Water from hot tubs or swimming pools should be discharged onto the yard rather than into the drain field, since this might impose an unnecessary strain on a septic system. It is best not to flush chemicals down the toilet. Avoid flushing chemicals down the toilet because they can interfere with the bacterial process that breaks down solid wastes. There are also several other commercial septic tank additives, which are often more harmful than beneficial. Use of septic tank chemicals is not recommended unless it has been prescribed by a trustworthy specialist.

Septic Tank Pumping Procedure – Pumping out the Septic Tank

Fill out the form below to ask a question or to make a comment on the stages and procedures involved in pumping out and cleaning a septic tank

InspectAPedia does not allow any form of conflict of interest. The sponsors, goods, and services described on this website are not affiliated with us in any way. Details on how to pump out or clean a septic tank may be found here. In this septic tank pumpout article series, you’ll learn how to locate, open, pump out, clean, and inspect conventional septic tanks, as well as how to locate, open, pump out, clean, and inspect conventional septic tanks using photos. In addition to septic pumping tank truck operators, this guideline is meant to provide basic information to homeowners and septic service providers that are concerned about septic system maintenance.

For this topic, we also have anARTICLE INDEX available, or you may check the top or bottom of the page.

Pumping Out the Septic Tank – how the solidswaste are removed from a septic tank

For this topic, we also have anARTICLE INDEX available, or you may check the top or bottom of the page. Use the SEARCH BOX to discover the information you’re looking for quickly.

Reader CommentsQ A

Last month, our septic system overflowed into two bathrooms, which was a nightmare. According to the report, the circuit breaker had tripped and the sump pump was not operating properly. Because it had been 5 years since the tank had been filled, I phoned a local pumper to empty it. Surprisingly, they just opened the overflow tank and pumped the contents of it. That is something I have never seen before. We’ve always had the septic tank itself opened and pumped, which is a good thing. When I questioned the pumper, they said that pumping the auxiliary/overflow tank was standard procedure.

Is it possible that we were duped?
When the tank’s inlet and exit baffle conditions are checked, the task is done better, and providing a second access point may make cleaning sludge and crud at that end easier to reach.

In the intake end of the tank, I’ve drilled a hole and exposed one at a depth of around 13 inches.
Thank you in advance for any advise you may provide!
It is dependent on the pumping machinery used by the individual pumper truck, as well as the horizontal and vertical lift lengths involved.

During this section, we will discuss the limitations of septic tank pumper trucks in terms of both horizontal distance and vertical lift.
In order to pump out the septic tank, how near does the truck need to get to the tank?

Question: pumper said can’t pump septic tank because of hair

A photo shows evidence that some buildings may really be exposed to significant amounts of hair: thick clumps of dog hair were dragged into this water heater draft hood, causing the heater to become dangerous and putting the occupants at risk of carbon monoxide poisoning On May 24, 2020, a hair in a septic tank stated: I had a septic tank pumping business come out to my house. This is something I do every three years (1000 gallon tank). The operator informed me that he would be unable to pump it because I had an excessive amount of hair in the machine.

He stated that he would consult with his supervisor, but that he would consider a chemical therapy and retrying in three months.

I’m happy I did, because some of these therapies may be really hazardous to your health. I was wondering if there was a way to get around this hair problem (ie: chopping it up then suction or using a larger pump tube size to extract). Any suggestions would be much appreciated.

Moderator reply: Problems Caused by Hair in the Septic Tank?

Unusual circumstances, such as finding so much hair in a sewage tank that the tank cannot be drained, require more inquiry. It is also necessary to clarify that the hair is indeed hair, and to provide an explanation. You may want the services of a septic pumping contractor who is equipped with a reliable grinder pump. But first and foremost, we must determine whether or not there is a blocking item in your septic tank, and if there is, how it got there and what exactly it is. When it comes to septic tank hair, don’t rely on chemical treatments to “fix” the problem.

Is it conceivable that roots have infiltrated your septic tank and caused damage?

Details: hair may clog traps and drains, but a clogged septic tanks such that it can’t be pumped would be unusual.

I was taken aback by your remark that there is so much hair in your septic tank that it is impossible to clean the tank properly. It is not possible for hair to disintegrate in the drain system or in the septic tank, whether it comes from people or pets. Although the regular amounts of hair entering the building drain/waste pipe system from routine family washing and bathing do not generally cause problems in the septic tank, they can cause clogging at the drain or trap of a sink, shower, or bathtub.

Large amounts of hair can potentially clog a septic pump or a lift pump, depending on their design.

Having that much hair in a sewage tank that it prevents the tank from being pumped by the septic pumping truck would be an unusual and difficult thing to explain to others.

Septic pumper trucks can usually handle hair as well as floating scum and settled sludge

In most cases, the hose on a septic tank pumper truck is three inches in diameter, and the pumps on septic tank pumper trucks are powerful enough to suck up tiny boulders as well as remove the floating scum layer and settled sludge layer from a septic tank. In reality, while researching and producing the septic pump vacuum pump article I referenced above, we discovered that the word “hair” did not appear in any of the septic pumper truck pump specs or descriptions. See the website for further information.

In most cases, the pumper can pump through even the thickest hardened floating scum layer or settled sludge layer that has accumulated.

On rare occasions, a pumper may actually add water to the septic tank in order to aid in the breakdown of solids prior to pumping.
That advice, in my opinion, may imply that the person who is proposing it has a limited grasp of how septic systems operate and must be corrected.
As soon as someone runs ANY plumbing fixture in the building, the chemical, which has already been diluted by the liquid volume of the septic tank, is pushed out into the drainfield.

2.
Insist on having your septic tank inspected by a qualified septic tank cleaning specialist and report back to us with the results.

Continue reading atINSPECT the SEPTIC TANK DURING PUMPING, or choose a topic from the closely-related topics listed below, or see the completeARTICLE INDEX for a comprehensive list of articles. Alternatively, consider the following:

Septic Tank Pumping Articles

PUMPER TRUCK VACUUM PUMPS

HOW TO FIND A SEPTIC TANK
SEPTIC TANK LEVELS OF SEWAGE
SEPTIC TANK PUMPING MISTAKES

ERRORS IN THE TIMING OF THE SEPTIC TANK’S PUMPOUT
SEPTIC SYSTEM BACK-PUMPING-consumer warning
SEPTIC TANK OBJECTIVE INFORMATION

SEPTIC TANK PUMPOUT TIMING ERRORS
WHEN SHOULD A SEPTIC TANK BE CLEANED
WHEN SHOULD A SEPTIC TANK NOT BE PUMPED

SEPTIC TANK INSPECTION PROCEDURE
SEPTIC TANK LEVELS OF SEWAGE
PUMPER TRUCK OPERATION PROCEDURE

PUMPING THE SEPTIC TANK
CLEANING SEPTIC TANKS
WHEN TO CLEAN THE SEPTIC TANK

WHEN NOT TO PUMP A SEPTIC TANK
FINDING THE SEPTIC TANK, HOW TO
HOW TO OPEN A SEPTIC

BEFORE PUMPING, INSPECT THE SEPTIC TANK
AFTER PUMPING, INSPECT THE SEPTIC TANK
CLOSE THE SEPTIC TANK

INSPECT THE SEPTIC TANK

NOTE THE LOCATION OF THE SEPTIC TANK AND THE CONCLUSIONS OF THE SEPTIC PUMPING.

Reasons for Septic Tank Pumping

Septic Tank Pumping Schedule
Septic Tank Safety
Septic Tank Chemicals

Septic Tank Pumping Reasons

Suggested citation for this web page

PUMPING THE SEPTIC TANKatInspect A pedia.com is an online encyclopedia of building and environmental inspection, testing, diagnosis, repair, and issue avoidance guidance for the construction industry.

INDEX to RELATED ARTICLES:ARTICLE INDEX to SEPTIC SYSTEMS

Alternatives include asking a question or searching InspectApedia using the SEARCH BOXfound below.

Ask a Question or Search InspectApedia

If you have any questions, answers, or comments concerning the methods and procedures involved in pumping out and cleaning a septic tank, please post them here. We encourage you to use the search box just below, or if you prefer, you may make a question or remark in theCommentsbox below and we will get back to you as soon as possible. InspectApedia is a website that allows you to search for things. Please keep in mind that the publication of your remark below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link.

We sincerely apologize for the inconvenience.

Technical ReviewersReferences

Citations can be shown or hidden by selecting Show or Hide Citations. InspectApedia.com is a publisher that provides references. Daniel Friedman is an American journalist and author.

What is a Septic Tank Pump

Pump for septic tanks In the context of septic tanks, this term refers to a submersible water pump that is positioned either in the last chamber of the tank or in a separate pump sump after the tank. A septic tank pump is a tiny electrical water pump that may be submerged in wastewater and is used to pump out sewage. The pump will be activated and deactivated by a float switch when the chamber fills with water. When the pump is turned on, a little impeller in the pump rotates, which causes the water to be forced upward via the pipes to which the pump is attached.

Why Do You Need a Septic Tank Pump

When it comes to pumping effluent from a septic tank or sewage treatment plant to a higher level, a septic tank pump comes in handy. This may be important if you have either a raised percolation area or a soakaway in your yard. It may also be required in situations when the ultimate sewage disposal destination is positioned upslope from the septic tank outlet, making it impossible for wastewater to flow to the final effluent disposal point by gravity.

Installing a Septic Tank Pump in a Septic Tank

Pumps for septic tanks can either be put directly into an existing septic tank or at a pump station that is connected to the septic tank. The pump should not be installed directly in your septic tank, unless your tank is a single chamber septic tank. In the case of single chamber septic tanks, installing a septic tank pump will result in the pumping out of particles that have accumulated. Solids can accumulate in a soakaway or percolation area, causing it to get clogged. If you have a two- or three-chamber septic tank, you may put a submersible septic tank pump in the final chamber of the tank to help with drainage.

It is advised that you install a dirty water pump that is capable of handling tiny particles up to the size of 30mm. It is possible that the pump will become clogged with tiny particulates if this step is not taken.

Installing a Septic Tank Pump in a Separate Pump Sump

Pumping septic tank effluent is best accomplished by the installation of a septic tank pump in a separate chamber or the purchase of a pre-assembled pump station. A packaged pump station will typically include a pump that has been preinstalled into a chamber that has been outfitted with the requisite gate valves and non-return valves.

Septic Tank Filters

It is preferable to place septic tank filters, also known as bristle filters or effluent filters, in front of a pump station if at all possible. These filters are a very simple and effective way to protect your pump from being damaged by foreign objects. The effluent filter captures and retains any small solids that are present in the wastewater as it flows into the pump chamber. If possible, this filter should be installed in a 110mm/4″ T piece under a manhole so that it can be easily removed and washed once or twice per year.

Septic Tank Pump Alarms and Controls

A septic tank pump alarm should always be installed in conjunction with the installation of a septic tank pump. These are typically comprised of a float switch that is hooked into a miniature alarm panel. If the pump fails, the water level in the pump chamber rises since no water is being pushed away from the pump chamber. The rising water level activates the float switch, which in turn triggers an alert and the flashing of a beacon to warn of the impending danger. In addition, alarms with a GSM dial-out feature are offered.

Septic Tank Pump Costs

Septic tank pumps for residential use are not very pricey items. Normally, they cost £150/€175 per person. The cost of installing the pump may be the same as if you hired a professional septic tank repair firm to do the work for you. Pumps with greater capacity may be necessary when pumping a big commercial septic system, when pumping over a long distance, or when pumping from an elevated position.

Septic Tank Pumping

Septic tanks are used in the vast majority of on-lot sewage systems nowadays. The subject of how frequently a septic tank should be pumped has been a source of contention for several decades. For example, there are some homeowners who say they have never drained their septic tank and that it “appears” to be in fine working condition. While trying to establish a standard pumping strategy, authorities have taken a more conservative approach and have declared that all septic tanks should be pump out every two to three years.

How a Septic Tank Works

Box 1.Can you tell me how much solid trash you generate? The average adult consumes around one quart of food every day. The body removes just a very little percentage of this meal and utilizes it to provide energy for the body’s functions. The remaining portion is discharged into the waste water system. This translates into around 90 gallons of solid waste being discharged into the septic tank per adult each year. Based on the assumption that the anaerobic bacteria in the septic tank reduce the waste volume by around 60%, this indicates that each adult contributes approximately 60 gallons of solids to their septic tank each year.

Consequently, it will take around 5 years for one adult to completely fill a 1,000-gallon septic tank with sludge and scum, which is approximately 300 gallons.

It is simple to infer that a septic tank should be pumped every two to three years after accounting for adults who work outside the home for a third of the time and children who attend school after making these modifications to the study.
Single chamber septic tanks were the most common type of septic tank until recently.
Septic tanks are designed to aid the removal of particles that are heavier than water by encouraging these heavy particles to settle to the tank bottom, resulting in the formation of the sludge layer.

It is also designed to keep particles that are lighter than water by encouraging these lighter particles to float to the surface and be maintained in the tank, resulting in a layer of scum on the surface of the tank.

In part, this is due to the fact that the temperature of the septic tank is equal to that of the soil surrounding it, and the anaerobic bacteria require higher temperatures in order to effectively decompose organic material in wastewater and thus reduce the biological oxygen demand (BOD) of the wastewater.

Holding on to the heavy (settleable) and lighter (floatable) particles allows the septic tank to gently fill with solids from the bottom up as well as from the top down.

Septic tanks with an exit filter will catch and decrease the flow of solids into the absorption area when the tank is properly designed and installed.
As a result, it is critical that every septic tank be pumped on a regular basis to eliminate the organic particles that have been collected and partially digested.
Small amounts of the particles kept in the tank degrade, but the vast majority of the solids stay and build up in the tank.

Under no circumstances should you enter a septic tank.
With continued usage of the on-lot wastewater disposal system, an accumulation of sludge and scum builds up in the septic tank.
As the amount of sludge and scum in the tank fills up, wastewater is maintained in the tank for a shorter period of time, and the solids removal process becomes less efficient as a result.

It is necessary to pump the tank on a regular basis in order to avoid this. Asseptage is the term used to describe the substance injected. Cross-sectional view of a two-chamber septic tank (Figure 1).

Number of bedrooms in the home	Estimated daily flow (gallons/day)	Minimum septic tank size (gallons)
3	400	900
4	500	1,250
5	600	1,400
6	700	1,550

How Frequent should a Septic Tank be Pumped?

Pumping frequency is determined by a number of parameters, including:

The capacity of the septic tank
The amount of wastewater that is put to the septic tank each day (see Table 1)

The amount of solids in a wastewater stream is measured. In this regard, it should be noted that there are various different types of particles that are regularly dumped into a septic system. This group of solids includes (1) biodegradable “organic” solids such as feces (see Box 1), (2) slowly biodegradable “organic” solids such as toilet paper and cellulosic compounds, which take a long time to biodegrade in the septic tank, and (3) non-biodegradable solids such as kitty litter, plastics, and other non-biodegradable materials, which do not biodegrade and quickly fill the septic tank It is possible to significantly reduce the quantity of slowly biodegradable organics and non-biodegradable trash that is introduced to your septic tank by reducing the amount of organic waste that is added to the tank.

Another factor that influences how soon a septic tank will fill with solids is one’s way of living. In terms of septic tank function, the two most essential aspects of one’s lifestyle are as follows: Homes with expanding families, having children ranging in age from tiny children to adolescents, often consume more water and deposit more sediments into the septic tank than other types of households. Empty nesters, and especially the elderly, on the other hand, have a tendency to consume significantly less water and to deposit significantly less solid waste in septic tanks.

The particles in a septic tank tend to be taken away from the tank to the soil absorption region, as previously indicated.

As additional materials collect in the absorption region, these sediments begin to choke the soil, preventing wastewater from being able to fully absorb.
In most cases, the removal of these biomats is both expensive and time-consuming.
Pumping the wastewater that has accumulated in the soil absorption area is required for the removal of the biomat.

The biomat normally decomposes within a few days after the absorption area has been completely dewatered and has been aerated.

Is It Time To Pump Your Septic Tank?

So, how does one go about determining how frequently a septic tank needs be cleaned? We are aware that residences who dispose of huge volumes of non-biodegradable and slowly biodegradable organic waste into their septic tank require more frequent pumping. It is also known that prior to the time at which the collected solids have accumulated to the point that they are being taken with the tank effluent to the absorption region, the septic tank should be pump out. When it comes to determining when (and how frequently) to pump your septic tank, there are two generally safe ways to use.

The alternative method is to open the access port to the first chamber (as shown in Figure 1) once a year and insert a long pole to the bottom of the tank and then pull it out of the tank.

If the sludge has accumulated to more than one-third of the tank’s total depth, it is time to have it drained out completely. The majority of households will benefit from having their tanks drained every two or three years instead.

The Pumping Process

Contractors who specialize in septic tank pumping and hauling may pump your septic tank. It is a good idea to be present to check that everything is completed correctly. For the material to be extracted from the tank, it is necessary to break up the scum layer, and the sludge layer must be combined with the liquid section of the tank. In most cases, this is accomplished by alternately pumping liquid out of the tank and re-injecting it into the bottom of the tank. Not the little intake or outlet inspection openings situated above each baffle, but the two huge central access ports (manholes) are required for pumping the septic tank.

It is not suggested to use additives in septic tanks to minimize the volume of sludge or as a substitute for pumping in order to achieve these goals.
When you have your septic tank pumped, you should consider taking an additional step to ensure that your septic system continues to perform correctly for a long time.

This inspector can tell you whether or not your septic tank needs to be repaired, as well as whether or not other components of your sewage system require upkeep.
Mark the position of the tank as well, so that it may be found simply in the future for pumping.

Schedule Septic Tank Pumping

Homeowners should develop the practice of getting their septic tanks drained on a regular basis. As long as you are able and willing to schedule regular septic tank pumping (every two or three years, for example), it may be feasible to improve the overall performance of your complete on-lot wastewater disposal system. According to research conducted at Penn State, your soil absorption system will benefit from frequent resting periods (a period during which no wastewater is added to the absorption area).

In other words, the whole system, particularly the soil absorption region, will have the opportunity to dry up, and any organic waste (biomat) that may have formed in the soil absorption area will degrade swiftly in the absence of water.

Summary

A septic tank is simply one component of a complete on-site wastewater treatment system. Its purpose is to remove solids from the effluent prior to it reaching the soil absorption region, to allow for the digestion of a part of those solids, and to store the remainder of the solids in a holding tank. It is not necessary to use biological or chemical additions to enhance or speed the breakdown process.

Grinders contribute to the solids load on the system by reducing the size of garbage. Solids must be removed on a regular basis in order to prevent them from accessing the soil absorption zone. Every two to three years, you should have your septic tank drained and examined by a professional.

For additional assistance contact

Your local Sewage Enforcement Officer or Extension Educator can help you with these issues. A contact for the Pennsylvania Association of Sewage Enforcement Officers (PASEO) is as follows:4902 Carlisle Pike,268Mechanicsburg, PA 17050 Phone: 717-761-8648 Email: [email protected] Philadelphia, PA 18016 717-763-7762 [email protected] Pennsylvania Septage Management Association (PSMA)P.O. Box 144 Bethlehem, PA 18016 717-763-7762

How Your Septic System Works

Underground wastewater treatment facilities, known as septic systems, are often employed in rural regions where there are no centralized sewage lines. They clean wastewater from residential plumbing, such as that produced by bathrooms, kitchen drains, and laundry, by combining natural processes with well-established technology. A conventional septic system is comprised of two components: a septic tank and a drainfield, often known as a soil absorption field. It is the septic tank’s job to decompose organic matter and to remove floatable stuff (such as oils and grease) and solids from wastewater.

Alternate treatment systems rely on pumps or gravity to assist septic tank effluent in trickling through a variety of media such as sand, organic matter (e.g., peat and sawdust), constructed wetlands, or other media to remove or neutralize pollutants such as pathogens that cause disease, nitrogen, phosphorus, and other contaminants.

Specifically, this is how a typical conventional septic system works:

All of the water that leaves your home drains down a single main drainage pipe and into a septic tank. An underground, water-tight container, often composed of concrete, fiberglass, or polyethylene, serves as a septic system’s holding tank. Its function is to retain wastewater for a long enough period of time to allow particles to sink to the bottom and form sludge, while oil and grease float to the surface and produce scum. Sludge and scum are prevented from exiting the tank and moving into the drainfield region by compartments and a T-shaped outlet. After that, the liquid wastewater (effluent) exits the tank and flows into the drainfield. The drainfield is a shallow, covered hole dug in unsaturated soil that serves as a drainage system. Porous surfaces are used to release pretreated wastewater because they allow the wastewater to pass through the soil and into the groundwater. In the process of percolating through the soil, wastewater is accepted, treated, and dispersed by the soil, finally discharging into groundwater. Finally, if the drainfield becomes overburdened with too much liquid, it can flood, causing sewage to flow to the ground surface or resulting in toilet backups and sink backups. Finally, wastewater percolates into the soil, where it is naturally removed of harmful coliform bacteria, viruses, and nutrients. Coliform bacteria are a kind of bacteria that may be found in the intestines of humans and other warm-blooded animals, with humans being the most common host. As a result of human fecal contamination, it is a sign of this.

The Guadalupe-Blanco River Authority has built an animated, interactive model of how a residential septic system works, which you can view here.

Do you have a septic system?

It’s possible that you’re already aware that you have a septic system. If you are not sure, here are some tell-tale symptoms that you most likely are:

You make use of well water. In your home, the water pipe that brings water into the house does not have a meter. In the case of a water bill or a property tax bill, you will see “$0.00 Sewer Amount Charged.” It is possible that your neighbors have a septic system

How to find your septic system

You can locate your septic system once you have confirmed that you have one by following these steps:

Taking a look at the “as constructed” drawing of your house
Making a visual inspection of your yard for lids and manhole covers
Getting in touch with a septic system service provider for assistance in locating it

Failure symptoms: Mind the signs!

Examining the “as constructed” drawing of your house; Checking for lids and manhole covers in your yard. A septic system service company who can assist you in locating it is to be sought.

Water backing up into the drains of homes and businesses
It is especially noticeable in dry weather that the drainfield grass is bright green and spongy. The presence of standing water or muddy soil near your septic system or in your basement
A strong stench emanating from the area surrounding the septic tank and drainfield

Understanding Pumping Systems

A pump tank with controls and an alarm, as well as a riser that has been raised to the surface, are all included. In continuing with our tour of onsite treatment systems, we will now discuss pumping systems in further detail. In addition to pumps, there are tanks, which we’ll address only from the standpoint of correct sizing for the application, rather than from the perspective of installation (since we covered that earlier). As a result, we will now begin a series of articles on the design and installation of pumping systems.

It doesn’t matter what application you’re using, a pumping system is made up of four parts: Pump the tank or the sump.
Controls.
The location of the pump is determined by the flow of sewage through the system as a whole.
Several pumps are used to transport raw sewage to a pretreatment device, such as a septic tank, for treatment.

Septic tank effluent is sent to another pretreatment equipment, such as a media filter, or to the ultimate soil dispersal area in some cases. Some applications necessitate the use of several pumps.

Pumping to gravity systems

There are two primary applications for gravity. The first includes pumping raw sewage from a basement sump up to the house sewer, where it flows by gravity into the septic tank. The second involves pumping raw sewage from the house sewer up to the septic tank. Septic tank effluent is transported to the final soil treatment location in the second step. Whenever the pump is situated in the basement or lower level of a house, it is contained within a sump basket. Not to be confused with a sump pump, which is used to pump clean water out of a basement.

It is necessary to install a sewage ejector or solids-handling pump on the lower floor if there is a toilet.
The use of effluent screens at the septic tank’s output will also assist to prevent this problem from developing.
Sump baskets in the basement are typically composed of plastic and have a capacity of 30 to 50 gallons each.
Because of the low storage capacity, if a pump malfunction happens, it will be quickly visible.
As previously stated, this sump must be vented; this need will almost certainly be addressed by the state plumbing code, which may necessitate that a professional plumber install and operate on the sump.
The lid must be gastight and of the bolt-and-gasket variety to enable for easy maintenance and replacement of the gaskets within.

From pump to field

In the second use, raw sewage flows from the home to the septic tank by gravity, and the septic tank effluent flows by gravity to a pump tank, where it is treated. Following collection in the pump tank, the effluent is transported to the soil treatment facility for ultimate dispersion. As a result, if the pump breaks here, water use in the residence must be curtailed until the problem can be resolved. The reserve storage capacity for sewage from the house is defined by the capacity of the pump tank above the level of the high-water alert system.

Solids are more likely to accumulate in this situation.

Most of the time, a separate waterproof tank is added to serve as the pump or as a dosing tank for the system.

Pump vaults are used in certain unique goods to cover the pump in either a septic tank or a pump tank, depending on the product. If you decide to use one of these, make sure that the vault capacity and the pump capacity are compatible.

Sizing the pump tank

The total daily flow determines the size of a pump tank’s storage capacity. It must be big enough to give the required dosage volume while also providing sufficient storage capacity in the event of a pump failure. The tank should be large enough to accommodate the normal daily flow of sewage from the house, if possible. If a smaller tank is employed, it is recommended that an alternating two-pump system be used. Pump tanks are available in both round and rectangular shapes. A riser is required for any tank, but it is especially important for pump tanks since it allows for simple access to the pump for maintenance and replacement.

A minimum of four inches should be provided between the bottom of the tank and the pump.
The block or blocks that are utilized should be broad enough to accept the pump base, so that when it is removed, the replacement or repaired pump may be readily reinstalled on the pedestal once it has been fixed.
Make certain that the basket will function properly for the pump’s capacity once again.
There must be at least two inches of height difference between the bottom of the discharge piping from the pump and the supply line leading to the next box.
A drop box system assures that the effluent is delivered to the first trench in the sequence by doing so.

What Happens If I Don’t Pump My Septic Tank?

When you fail to maintain your home’s septic tank, the consequences extend beyond the unpleasant odors; depending on the severity of the problem, it can have an influence on the entire neighborhood. It is recommended that you pump your tank on a frequent basis to keep it in good working order. For the following reasons, it is an essential duty.

Purpose Of Your Septic Tank

Septic tanks, regardless of the type you have, function to properly handle the waste generated by your home or business. When there is no centralized sewer system, they are utilized to collect and dispose of waste. The tank, which is located below, retains wastewater and treats it using mechanical processes that are not harmful to the environment.

What Pumping Does

When your system reaches capacity, it will need to be pushed out again. This will occur spontaneously as a result of regular usage. Pumping is an element of routine septic system maintenance, just as are inspections and repairs for your system. Pumping has been assigned the task of clearing your system of water waste so that it can create way for more. As a result, your tank’s lifespan is extended, sewage odors are avoided, and other problems that might affect your family and your neighbors are avoided.

When it reaches a publicly owned wastewater treatment plant, it can be processed and the water recycled for use in a variety of additional uses, depending on the treatment facility.

What Happens if You Don’t Pump Your Septic Tank?

Septic tanks are loaded with human waste, and if they are not maintained properly, they may discharge bacteria, phosphorus, and nitrogen into your water system, causing it to become contaminated with these contaminants. A conventional septic tank is typically comprised of two components: a septic tank and a drain field, also known as a soil absorption field. If your system becomes overburdened, it may begin to block the critical components that allow it to function properly. The following are some of the ramifications of failing to pump your tank:

Contamination of the water supply for your home and adjacent properties Smell of sewage in the yard or in the house Drains in your house are either too sluggish or fail to drain completely
The water in the home is backed up
In the vicinity of your tank or in the yard, look for swampy patches.

Signs You Need Your Tank Pumped

Your tank will eventually fill up and need to be emptied because it is unable to pump itself. This is a crucial component of your home’s systems, and it need maintenance in the same way that your HVAC, plumbing, and automobile do. It is recommended that you pump your tank at least once every three years. Keep an eye out for these frequent warning signals to determine whether or not your septic tank requires pumping:

In your yard, there is standing water
You have a clogged drain or toilet that refuses to unclog. You notice that your yard smells like raw sewage or garbage, especially in the vicinity of your septic system manholes. Sinks, bathtubs, toilets, and other fixtures that take a long time to drain
Nitrate levels in your well water are quite high
The last time your septic system was cleaned and pumped was several years ago

Call The Professionals

Septic tank pumping is a tedious and time-consuming task that the ordinary homeowner is unable to complete on their own. It’s possible that they don’t have the required equipment or information about how to properly dispose of the garbage. This does not imply that you should forego pumping; rather, it indicates that you should contact your local pros to do the task before it becomes an issue. Turn to NoCo Septic in Boulder for all your residential and business septic requirements if you aren’t sure when you should have your septic system cleaned.

Pump Systems

Installation of a demand flow pump for a residential sewage system in Virginia is shown in the drawing as a ‘typical’ installation. The fact is that for many years, this was practically the only form of pump system that was offered to consumers. Because it is still a fairly prevalent form of system, we will use it as a starting point for teaching how pump systems operate in general. The system is made up of a number of critical components. Let’s start with the pump chamber and work our way down.

The septic tank’s effluent is drawn into the pump chamber by gravity.

The septic tank is responsible for liquifying wastewater and retaining the majority of particles.

The pump is represented as a blue box-like item at the bottom of the tank.

The pump is used in certain systems to disperse effluent equally, while other systems rely on the pump to simply overcome elevation differences.

When it comes to residential systems, it’s uncommon to find pumps with capacities less than 1/4 horse power or greater than 1/2 horse power.

The “pump enable/off” float is the lowest of the floats.

This implies that the pump can operate when both the middle or pump ‘on’ floats are tipped to the on position at the same time.

On a typical operation, wastewater from the septic tank fills the pump chamber, with effluent being maintained between the two bottom floats by the pump control valves.

A four-bedroom house produces between 150 and 600 gallons of effluent every day, depending on the size of the residence.

Most 1,200-gallon septic tanks have a liquid depth of 48 inches, which means that each inch of liquid depth is equivalent to around 22 gallons.

Normally, the floats are closer to the 7′′ distance than the 22′′ distance in terms of value.

sewage is corrosive, but sewer fumes are even more corrosive.

However, a larger tank would allow for more pumping capacity, but a larger tank is more expensive, and there is no benefit to administering a larger dosage other than increased expense.

If, for any reason, the pump does not start when the ‘on’ float is tipped to the right, the high water alarm will sound an audio visual warning to alert the user that there is a problem with the pump and to alert the user that the pump is not working.

This can be extended to a day or longer if water saving measures are strictly adhered to.

The length of time it takes for the tank to fill varies on a variety of factors, including the number of people who are using the system, the size of the tank, how strict the users are with their water consumption, and other variables.