What Is The Cost Of Making A Septic Tank Bigger? (TOP 5 Tips)

There are several different types of septic systems available for properties of different shapes and sizes, so the cost of installation varies significantly. In general, most homeowners pay around $3,138 to $8,518. However, a larger tank or more complicated system could result in a high-end cost of around $18,163.

  • It is common to think that a larger property will require a larger tank, but if it can only hold a small number of individuals, then the amount of waste created will be less. A small-sized septic tank can cost upwards of £750, whereas a larger system can cost £1000 – £2000 and beyond. Location.

How do I increase the size of my septic tank?

The simplest way to add to your septic tank while remaining connected to existing sewer lines is to simply add an additional septic tank. This gives your home a larger wastewater capacity, and gives your septic system more time to treat the wastewater before draining.

What happens if septic tank is too small?

An adequately sized septic system may only need pumping every two to five years on average. If the septic tank is too small or the drain field is in danger of overloading, homeowners may consider pumping the tank once or twice per year until they can renovate and enlarge the system.

Is a bigger septic tank better?

For instance, if your home has two occupants, you will require a small septic tank. On the other hand, if your property has more than five occupants, you will need a bigger septic tank to manage your wastewater more effectively and hygienically.

Do I need to upgrade my septic tank?

Under the new rules, if you have a specific septic tank that discharges to surface water (river, stream, ditch, etc.) you are required to upgrade or replace your septic tank treatment system to a full sewage treatment plant by 2020, or when you sell a property, if it’s prior to this date.

How long will a leach field last?

Under normal conditions and good care, a leach-field will last for 50 years or more. Concrete septic tanks are sturdy and reliable but not indestructible.

What are the sizes of septic tanks?

Standard tank sizes are typically 1,000, 1,250 and 1,500 gallons, and these suit most homes. Typically, the minimum tank liquid capacity of a one- to three-bedroom home is 1,000 gallons.

What should be the size of septic tank?

Length of septic tank (L) should be taken as 9feet 9 inches or 9.75 feet. Breadth of septic tank (B) should be taken as 6 feet 3 inches or 6.25 feet. The standard height (D) of septic tank should be taken as 5 feet 9 inches or 5.75 feet.

Can you enlarge a septic system?

ENLARGING THE SYSTEM The increase from three to five bedrooms will require more septic tank capacity (usually 1.5 times), and that will involve replacing the current tank or adding an additional tank in series. The drainfield or other soil treatment component (mound, at-grade) will need to be enlarged by two-thirds.

How often does a 1000 gallon septic tank need to be pumped?

For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.

How big of a septic tank do I need for a 3 bedroom house?

The correct size of the septic tank depends mostly on the square footage of the house and the number of people living there. Most residential septic tanks range in size from 750 gallons to 1,250 gallons. An average 3-bedroom home, less than 2500 square feet will probably require a 1000 gallon tank.

What is the average size of a home septic tank?

Common residential septic tanks range in size from 750 gallons to 1,250 gallons. A septic tank is a self-contained unit designed to hold residential wastewater. The system is comprised of two main components: the tank and the drain, or soil absorption field.

How long do septic tanks last?

A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.

How much does it cost to pump a septic tank?

How much does it cost to pump out a septic tank? The average cost is $300, but can run up to $500, depending on your location. The tank should be pumped out every three to five years.

Are plastic septic tanks better than concrete?

Plastic septic tanks are watertight and are immune to water-based corrosion. They are also rust-resistant. Plastic tanks are less prone to cracking since plastic is flexible, and thus a plastic septic tank does not crack as much as a cement septic tank. Plastic septic tanks are more hygienic than cement tanks.

Learn how much it costs to Install a Septic Tank.

Septic tanks range in price from $3,157 to $10,367, or an average of $6,743. Installation of a conventional 1,000-gallon tank for a three-bedroom home might cost anywhere from $2,100 and $5,000. Materials range in price from $600 to $2,500, without labor. A comprehensive septic system, which includes a leach field (also known as a drain field), tank, and plumbing, can cost between $10,000 and $25,000 to install. A leach field installation might cost anywhere from $5,000 to $20,000, depending on the kind.

In the end, the cost of installing a septic tank is determined by the kind of system, the materials used, and the size of the tank.

This course will teach you about the several sorts of settings, such as conventional, drip irrigation, mound irrigation, evapotranspiration, recirculating sand, constructed wetland, and chambered irrigation.

Septic System Cost Estimator

Let’s run some numbers to see what the costs are. What part of the world are you in? What part of the world are you in?

National Average $6,743
Typical Range $3,157 – $10,367
Low End – High End $450 – $20,000

The cost information in this report is based on real project costs provided by 943 HomeAdvisor users.

New Septic System Cost

Most tanks and systems cost between $2,000 and $10,000 to install a new typical anaerobic septic system. Aerobic systems range in price from $8,000 to $20,000. Depending on the size of your property, the composition of the soil, and the level of the water table, you may even have to pay an extra $10,000 or more for an alternative, specialized drain or leach field. Septic systems are composed of three major components:

  • In most cases, a new typical anaerobic septic system will cost between $2,000 and $10,000. $8,000 to $20,000 for an aerobic system. Depending on the size of your property, the composition of the soil, and the level of the water table, you may even have to pay an extra $10,000 or more for an alternative, specialized drain or leachfield. Three major components make up a septic system:

Optional components include the following:

  • Some types of systems use a dose or pump tank, which pumps wastewater up into mounded or elevated leach fields and recycles the water in some cases. Pump for aeration: If your aquarium is equipped with an aerobic system, you’ll want an aerator to force oxygen into the tank.
Find Local Septic Tank Installers

The installation of a traditional anaerobic system typically costs between $3,000 and $8,000 on average. Anaerobic systems are often less expensive to build than aerobic systems, which are more complicated. However, because they are less effective at cleaning the tank, you will need a bigger leach field to accommodate the increased burden. An anaerobic septic system is a very basic system that consists of a pipe that runs from the home to the tank and a branching pipe that runs from the tank to the drain field, among other components.

Aerobic Septic System Cost

Aerobic systems, which are those that require oxygen to work properly, cost on average between $10,000 and $20,000 per system. If you’re moving from anaerobic to aerobic fermentation, you’ll almost certainly need a second tank, but the conversion will only cost you $5,000 to $10,000. Aerobic systems break down waste more effectively in the tank than anaerobic systems, allowing you to use a smaller drain field in many cases – which is ideal for houses with limited space. An aerobic wastewater system is a wastewater system that depends on aerobic bacteria (bacteria that thrive in the presence of oxygen) to break down trash in the tank.

You’ll need an aerator as well as an electrical circuit that connects to the system to complete the setup. Small, mounded, or speciality fields may necessitate the addition of a dose or pump tank to assist in pushing effluent (sewage or wastewater) upward or out in batches.

Get Quotes From Local Septic Tank Pros

Beyond the tank and leach field, there will be a few more costs to consider when creating your budget for the project. You may already have some of these costs included in your total project pricing, so make sure to get line-item prices on your estimate.

  • Excavation costs $1,200–$4,500
  • Building permits cost $400–$2,000
  • And a perc test costs $700–$1,300. Labor costs range from $1,500 to $4,000
  • The cost of septic tank material ranges between $500 and $2,000.
  • Plastic and polymer materials cost $500–$2,500
  • Concrete costs $700–$2,000
  • And fiberglass costs $1,200–$2,000.
  • 500: $500–$900
  • 750: $700–$1,200
  • 1,000: $900–$1,500
  • 1,200: $1,200–$1,600
  • 1,500: $1,500–$2,500
  • 2,000: $3,000–$4,000
  • 3,000: $4,500–$6,000
  • 5,000+: $7,500–$14,000
  • 500: $500–$900
  • 1,200: $1,200–$1,

Leach Field Cost

Installing a leach or drain field, which is a component of your septic system, can cost anywhere from $3,000 to $15,000 in total. The cost of a typical drain field ranges from $2,000 to $10,000. The drain field, also known as the leach field, is the component of the septic system that is responsible for returning wastewater to the soil. Most of the time, a flooded area in the yard or a strong stink of sewage on the property is the first symptom of a problem with the drainfield. It is possible that you may require further treatment for blocked or flooded fields, which would increase the cost of the drain field repair from $10,000 to $50,000.

Alternative Septic Systems Cost

When you have a tiny property, a high water table, high bedrock, poor soil, or just wish to utilize less space, an alternate septic system is a good choice.

Mound Septic System Cost

Installing a mound septic system can cost between $10,000 and $20,000 dollars. In places with high water tables, thin soil depths, or shallow bedrock, this is the most costly system to build; yet, it is frequently required. In order to create a drain field, it uses a raised mound of sand rather than digging into the soil. Its extra cost is a result of both the additional technology required to pump sewage upward into the mound and the materials and labor required to construct the mound in the first place.

Recirculating Sand Filter Septic System Cost

Sand filter septic systems range in price from $7,500 to $18,500. They can be built above or below ground depending on the situation. In order to disperse the wastewater in the ground, they employ a pump chamber to force the wastewater through a sand filter. The liner of the filter box is normally made of PVC. This is accomplished by pumping the effluent through the sand and returning it to the pump tank, where it is then disseminated throughout the ground.

Drip Septic System Cost

Drip systems range in price from $8,000 to $18,000, depending on the size and complexity. They operate in the same way as previous systems, with the exception that they employ extensive drip tubing and a dosage mechanism. They deliver lower dosages over a shorter period of time, which is particularly effective at shallow soil depths. This method is more expensive than a standard system since it requires a dosage tank, a pump, and electrical power to operate.

Evapotranspiration System

Evapotranspiration systems range in price from $10,000 to $15,000 per system. In order to allow the liquid to evaporate from the top of an open-air tank, they employ a novel drain field configuration. They’re only usable in dry, arid areas with little rain or snow, thus they’re not recommended.

Built Wetland System

Built-in wetland systems range in price from $8,000 to $15,000, with the cost increasing if an aerobic tank is included. They are designed to simulate the natural cleaning process observed in wetland ecosystems.

After traveling through a wetland tank, where it is treated by microorganisms, plants, and bacteria, it is returned to the soil. The waste also has the effect of assisting the growth of wetland plants and the population of microbes.

Chambered System

Installation of chambered systems ranges from $5,000 to $12,000 dollars. They employ plastic perforated chambers surrounding pipes, which are frequently laid in sand, to keep them cool. Gravel is no longer required as a result of this. They are quick and simple to install, but they are more subject to crushing pressures, such as those caused by automobiles.

Septic Tank Replacement Cost

The cost of replacing a septic tank ranges from $3,000 to $10,000. From 30 to 40 years, you may anticipate your system to serve you well. The system may crack or corrode as a result of the failure and the resulting contamination of groundwater with toxic waste is an issue. When this occurs, the well water may get polluted, the yard may become marshy, and the septic system may become inoperable or fail completely. Here’s a breakdown of the various components of a septic tank, along with an estimate of their usual costs: Replacement of a septic tank pump costs between $800 and $1,400.

Replacement of the filter costs between $230 and $280.

Drain Field Replacement Cost: $7,500.

Septic System Maintenance Costs

It is essential that you pump and clean your septic tank at least once a year. In addition, you should get it examined at least once every three years. The proper maintenance of your septic tank will save you money in the long term, and it will also help you avoid potentially hazardous situations. The Environmental Protection Agency (EPA) suggests the following steps to keep your septic system in good working order:

Inspect and Pump Your Septic Frequently

Typically, the cost of septic tank pumping runs from $300 to $550, or around $0.30 per gallon – most septic tanks have capacities between 600 and 2,000 gallons. Every three to five years, you should have your septic tank inspected and pumped by a professional. If you have a bigger home (with more than three bedrooms) and you tend to use a lot of water, you should try to get it pumped at least once every three years. An checkup of a septic system might cost anything from $100 to $900. Your septic inspector will do a visual inspection of the system.

  • Initial inspection costs between $250 and $500
  • Annual inspection costs between $100 and $150
  • And camera inspection costs between $250 and $900.

Use Household Water Efficiently

A toilet that leaks or runs continuously might waste as much as 200 gallons of water per day, although the average family consumes just 70 gallons of water. Take, for example, high-efficiency toilets, which consume 1.6 gallons or less of water every flush or less. The use of new, high-efficiency washing machines and showerheads can also help to reduce water waste, which will relieve the load on your septic system.

Properly Dispose of Your Waste

Your septic system is responsible for disposing of everything that goes down your drains and toilets.

One easy rule of thumb is to never flush anything down the toilet other than human waste and toilet paper, unless it is absolutely necessary. That implies you should never flush the following items down the toilet or drop them down the sink drain:

  • Cooking grease or oil, baby wipes or wet wipes, dental floss, diapers, feminine hygiene products, cigarettes, cat litter, and paper towels are all examples of items that fall into this category.
See also:  How To Change Lateral Lines Out Of A Septic Tank? (Solution)

Maintain Your Drainfield

The drainfield of your septic system is a component of the system that eliminates waste from the septic’s liquid. You should take steps to keep it in good condition, such as:

  • Never park or drive your vehicle on your drainfield. Don’t ever put trees near your drainage system. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage equipment
Get in Touch With Septic Tank Installers Near You

Keep your drainfield free of vehicles and parking; No trees should be planted near your drainfield. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage equipment.

Concrete Septic Tank Cost

Concrete tanks range in price from $700 to $2,000. The total cost of installation ranges from $2,300 to $6,500. They’re one of the most often seen forms of installation. Despite the fact that they are vulnerable to cracking and separation, they are often resilient for several decades. It’s critical to have it carefully inspected on a regular basis for cracks and runoff, among other things. Inspections and frequent cleanings will assist to extend its useful life. Your professional can tell you how frequently you should get it inspected, but it’s normally every one to three years.

Plastic and Poly Septic Tank Prices

Septic tanks made of plastic range in price from $500 to $2,500 on average, not counting installation costs. Plastic is a long-lasting, lightweight, and reasonably priced building material. They do not break as easily as concrete and do not rust. Because of their small weight, plastics are more susceptible to harm during the installation process.

Fiberglass Septic Tank Prices

Fiberglass septic tanks are typically priced between $1,200 and $2,000, not including installation. Fiberglass does not split or rust readily, but it is prone to damage during the installation process, much like plastic. However, because of its lighter weight, it is more prone to structural damage, and the tanks themselves can move in the soil.

Steel

It’s unlikely that you’ll ever see a new steel tank constructed. They will rust or corrode with time, no matter how well-made they are at the time. As a result, they are not permitted by many municipal construction rules, and you will only encounter them in existing installations. Steel is not a long-lasting material in the earth, and it is the least preferred.

Labor Costs to Install a Septic System

The cost of labor accounts for 50 percent to 70 percent of your overall expenses. Labor is typically more expensive than the tank itself in a normal installation, making it the most expensive option. For example, while the size required for a 3 to 4-bedroom home may cost between $600 and $1,100, the labor to install it might cost anywhere between $1,500 and $4,000.

Compare Quotes From Local Pros

Here is a breakdown of how much septic tanks cost in different parts of the country. Massachusetts:$9,700 California:$4,500 Florida:$5,300 Texas:$8,000 $5,600 in New York City Colorado:$7,800 Idaho:$10,000

DIY vs. Hire a Septic System Pro

The installation of a septic system is a time-consuming operation. An incorrectly fitted unit can result in water contamination, structural damage to the property, and the need for costly repairs.

In addition, an unpermitted installation might make it harder to sell and insure a property when it is completed. Make a point of interviewing at least three pros before making a final decision. Contact a septic tank installation in your area now for a free quote on your job.

FAQs

A septic tank has an average lifespan of 20 to 30 years, however it may live anywhere from 14 to 40 years, depending on the following factors:

  • What it is made of is a mystery. Concrete tends to require more care, but commercial-grade fiberglass and plastic are known to survive for decades in most environments. It’s amazing how well you’ve kept it up. Every one to three years, have your system inspected and pumped out
  • Every three to five years, have it pumped out. It will depend on whether or not it gets vehicle traffic over the leach field. Driving over the leach field compresses it, which increases the likelihood of it failing. The soil’s chemical makeup is important. The length of time it may endure varies depending on the soil type and depth.

What are the signs I need a new septic tank?

There are a few indicators that it is time to replace your septic tank. These are some examples: If you smell sewage, you may have a solid waste problem in your septic tank that has to be dealt with immediately. Standing water: If there is no clear explanation for standing water, such as a significant rainstorm, it is possible that you have an oversaturated drain field, a damaged pipe, or a faulty septic system. A clogged septic tank will cause pipes to drain more slowly than they would otherwise be.

Construction on your home or the addition of more occupants will have an impact on your septic system.

pollution of nearby water: A septic tank leak can result in wastewater contamination, which can deposit nitrate, nitrite, or coliform bacteria in water sources around your property as a result of the leak.

Old age: If your septic system has reached the end of its useful life, it is time to replace it.

Does homeowners insurance cover septic systems?

Many unforeseen and abrupt repairs to septic tanks are covered by homeowners’ insurance policies. They do not, however, often cover harm caused by a failure to perform routine maintenance. Make certain that you are pumping and cleaning it on a yearly basis.

How much do septic system repairs cost?

Many unexpected and abrupt septic tank problems are covered by homeowner’s insurance. They do not, however, often cover damage caused by a failure to maintain the vehicle. Every year, check to see that it has been pumped and cleaned out.

  • Tank Pumps cost between $800 and $1,500. A septic tank that is placed below the drain field may necessitate the installation of a pump to transport wastewater to the drain field. Pumping costs between $300 and $600 per year. Pumping is required to remove solid waste from even a perfectly functioning system every two or three years, even if it is in good working order. Tank Lids cost between $100 and $300 to purchase and install. If you purchase the lid and attach it yourself, it will cost you between $50 and $150
  • Tank Lid Risers range in price from $300 to $1,000. Deeply submerged tanks can have their lids raised to the surface by using these devices.
Still Have Questions About Septic Tanks?

A Quick Look at Septic Tank Prices

  • Total cost: $3,900 on average
  • $1,500 to $5,000 on a sliding scale
  • Anaerobic septic tanks cost between $2,000 and $5,000
  • Aerobic septic tanks cost between $10,000 and $20,000
  • Gravity septic tanks cost between $1,500 and $4,000
  • Mound septic tanks cost between $10,000 and $20,000
  • Chamber septic tanks cost between $1,500 and $5,000
  • Conventional septic tanks cost between $2,000 and $5,000.

The wastewater generated by your household is teeming with potentially harmful germs. In order to properly dispose of waste and prevent it from backing up into your sinks and toilets, you must ensure that your septic tank is in good working condition. This Might Also Be of Interest to You: What Is the Difference Between a Septic System and a Sewer System? Everything you need to know about septic tank replacement, including how much it will cost, can be found in this article.

What Is a Septic Tank?

A septic tank is an underground chamber that is used to treat residential wastewater to a modest degree. It is intended to store wastewater for an extended period of time, allowing particles to settle to the bottom and oil and grease to float to the surface. After that, the liquid waste is filtered away.

How Much Does It Cost to Install a Septic Tank?

In most cases, a new septic tank system will cost you around $3,900 to install. It costs between $1,500 and $5,000 to install a conventional 1,250-gallon tank, which is the perfect size for a three- or four-bedroom house.

This price includes the tank itself, which ranges in price from $600 to $2,100 or more depending on the size and kind. Workman’s compensation is included in the price of the installation and often ranges from $1,500 to $4,000.

Types of Septic Tank Systems

Septic tank installation and replacement costs are heavily influenced by the type of system that you select to use. Tanks come in a variety of shapes and sizes. Here are a few examples:

Anaerobic Septic System

Anaerobic systems are a popular alternative for many homes since they don’t require any additional electricity or chemicals to function properly. Anaerobic systems include microorganisms that do not require oxygen to exist and hence are called anaerobic systems. Solid waste is broken down by microbes, and any leftover liquid waste is pumped out and spread beneath the surface of the soil. The garbage is naturally recycled when the water seeps into the ground and returns to the environment. The installation of these devices is between $2,000 and $5,000.

Aerobic Septic System

Aerobic systems, in contrast to anaerobic systems, make use of microorganisms that do not require oxygen to live. To activate the bacteria in the tank, oxygen is injected into it, and the bacteria then feed on the solid waste. Aerobic systems perform effectively in soils that are unsuitable for other systems and in areas where the groundwater table is elevated. It is an excellent choice for residences that are close to a body of water. Aerobic systems are more costly to install than anaerobic ones.

Gravity Septic System

Gravity septic systems employ gravity to filter and move water through the system. They must be put on a mild slope in order to allow water to flow without the use of a pump. The cost of installation ranges from $1,500 to $4,000.

Conventional Septic System

A standard septic system is comprised of a septic tank and a trench that serves as a drain field for the collection of waste. The trench is built on stone or gravel and is designed to allow water to move through it easily. In order to prevent sand or dirt from contaminating the clean soil, geofabric is laid over the top of the trench and secured in place. In order to function properly, a traditional septic system requires a huge amount of room. The installation of these devices is between $2,000 and $5,000.

Mound Septic System

If your groundwater table is close to the surface, a mound septic system is the most appropriate option for your situation. An area for the septic system is prepared, and a sand mound is built to allow effluent from the tank to be pumped into the mound in modest amounts. The sand then acts as a filter, preventing the water from reaching the soil and groundwater. This design necessitates a large amount of floor space. They’re also expensive to install since a sand mound needs to be built before they can be utilized.

Chamber Septic System

Chamber septic systems have lately gained popularity as an alternative to traditional septic systems.

They are comparable to conventional systems, with the exception that plastic chambers, rather than gravel, are utilized in the drain field. These are less difficult to build and have a lower carbon footprint. The cost of installing them ranges from $1,500 to $5,000.

Septic Tank Materials

Another aspect that influences cost is the type of material used to construct your septic tank. The following are some of the most often seen materials:

Concrete

Concrete septic tanks are the most prevalent form of septic tank because they are extremely long-lasting and reliable. They can survive for 20 to 30 years if they are properly maintained. Concrete, on the other hand, may break with time. When concrete is reinforced with rebar, the strength of the concrete is increased when subjected to pressure. Because of its weight, installation is more difficult and necessitates the use of specialized equipment. The cost of a typical-sized concrete tank ranges from $720 to $2,050 dollars.

Fiberglass

Fiberglass does not deteriorate when utilized underground, and because it is nonporous, it will not support the formation of algae. Because of the tank’s modest weight, it is easy to install. You won’t have to worry about cracking since, unlike concrete, it will not expand or shrink as the weather changes. The typical cost of a fiberglass tank is between $1,600 and $2,000.

Plastic

Tanks made of plastic are lightweight and simple to install. They’re also fairly long-lasting. Plastic tanks range in price from $830 to $1,400 on average, depending on the kind.

Steel

In spite of steel’s strength and durability, septic tanks built of steel are susceptible to rust and collapse if not properly maintained. As a result, several municipal governments have tightened their restrictions in order to discourage their usage. Typically, you’ll discover them in regions where the system was already in operation. If you are able to have one installed, they range in price from $900 to $9,900.

What Size Septic Tank Do You Need?

The size of your septic tank is normally decided by the number of bedrooms in your house. This is used to calculate the amount of water that will flow through the system on a daily basis. In general, the expense of a system increases in direct proportion to its size.

Two Bedrooms

A septic system with a minimum of a 750-gallon septic tank is required for a two-bedroom residence. However, in many localities, a 1,000-gallon tank is the least capacity that may be accommodated.

Three Bedrooms

A minimum of a 1,000-gallon water tank is required for a three-bedroom residence, which handles around 360 gallons of water each day on a daily basis.

Four Bedrooms

A bigger tank, with a minimum volume of 1,250 gallons, is required for a four-bedroom residence. It is capable of handling around 480 to 600 gallons of water each day. Additional Related Articles:

  • How to keep the cost of septic tank pumping to a bare minimum
  • 3 Symptoms of Sewer and Septic System Problems
  • Do you have a clogged sewer line? Here’s What You Should Do
  • Water Sewer Line Repair: Do It Yourself or Hire a Professional
  • Listed here are 15 common plumbing problems that every homeowner should be aware of.

Septic Tank Repair Costs

It’s conceivable that only a certain component of your septic tank has to be replaced rather than the complete tank. Repairs and replacement parts can be purchased for a fraction of the cost of a complete system replacement. The following are some of the most often seen repairs:

Drain Field

Drain fields can get overloaded and flood, resulting in sewage backing up into toilets and sinks. The cost of replacing a drain or leach field ranges from $3,500 to $11,000.

Tank Pump

A replacement septic tank pump typically costs between $500 and $1,200.

Tank Filter

It is the most typical type of filter change that is performed by homeowners. It typically costs between $230 and $280.

Tank Lid

Concrete coverings and steel lids may break and corrode as a result of exposure to the elements. In most cases, you can repair a septic tank lid on your own for about $35 and $60. In most cases, having it changed by a professional is more expensive.

Tank Baffle

The baffle is responsible for directing wastewater through the septic tank. A replacement baffle piece will cost between $23 and $44 dollars.

Additional Factors to Consider

A septic tank can be built either below or above ground, depending on your preferences. Because of the amount of excavating and footing preparation required, installing a tank underground is a pricey endeavor. Underground septic tanks necessitate the construction of a drain field that can accommodate a soakaway. In addition, because the soakaway allows for part of the wastewater to drain into the ground, the tank will require less emptying over time. Over time, this might result in a reduction in your expenditure.

See also:  Why Bury Septic Tank Lids? (Solution)

Some demand that an inspector check and approve the site, which might result in a fee being charged to the homeowner.

How Long Does a Septic Tank Last?

The lifespan of a septic tank varies based on the material used and the type of system used. The lifespan of a septic tank might be reduced if the tank becomes clogged due to roots or floods from groundwater. Septic systems have a lifespan of 15 to 20 years on average. Maintaining your septic tank on a regular basis is the most effective approach to extend its life. Keep in mind that maintaining your tank entails more than just draining out the contents; it’s also crucial to have a professional evaluate your tank on a regular basis and perform routine maintenance.

In the event that you have a plan in place, you can call our 24-hour repair hotline anytime a covered problem develops.

How Much Does a Septic Tank Cost? (2022)

The cost of replacing a septic tank typically ranges from around $3,000 to $10,000, depending on the type of tank your property requires, the size of your home, and the difficulty of the installation process. These variables can cause septic tank prices to vary greatly, and a whole septic system can be far more expensive than simply replacing a tank. Doing your research before making a purchase is a fantastic approach to ensure that you are receiving a decent price. When you have the appropriate knowledge, you’ll be prepared for what to expect and what reasonable rates for repairs and replacements look like when you begin making phone calls and getting estimates for your vehicle.

What is a septic tank?

It is an underground structure that cleanses tainted water that has been discharged from your residence. These tanks are often constructed of concrete, fiberglass, or polyethylene, and they are a component of a larger septic system that transports wastewater to the tank and then releases it when it has been properly treated. Connecting to a septic tank can be less expensive than connecting to a sewage system, and they are frequently more environmentally friendly. However, they can necessitate more upkeep and greater caution when it comes to what you flush down the toilet.

You may have the option of choosing between a septic system and an underground shared sewer system when building a new home, but most homeowners opt to keep the system that was installed when their home was constructed.

How does a septic tank system work?

Septic tanks, in general, work by removing floatable stuff (such as oil) and solids from your home’s wastewater before discharging the remaining treated water into either the soil, sand, organic matter, wetlands, or other media, depending on the situation. The intricacies of how each form of system operates, on the other hand, will differ. An uncomplicated septic system is one in which both grey water and blackwater from your home drain into a holding tank. After a period of time, solids settle to the bottom of the tank while fats, oils, and grease float to the surface, forming scum.

Afterward, the scum and sludge are removed from the wastewater, and the treated water is discharged into the drainfield for further filtering and treatment.

Water is then continually filtered as it travels downhill through the soil before reaching the groundwater.

Types of septic systems

There are many different types of septic systems, but the two most common are as follows:

  • Underground water treatment systems that use conventional (anaerobic) methods: These water treatment systems strain effluent (treated water) through stone or gravel in a drainfield. They’re normally best suited for single-family houses, and they’ll run you anywhere from $3,000 to $8,000 on average. Aerobic systems: These units increase the amount of oxygen in the tank, which accelerates the decomposition of organic waste. They can be utilized in situations when traditional systems may be ineffective, but they are more expensive, costing between $10,000 and $20,000 since they are more complicated.

Alternative system configurations include the following:

  • Chamber systems: These systems are an alternative to traditional (anaerobic) systems that do not require the use of gravel. They’re less difficult to construct and are better suited for places with higher water tables. The cost of installing a chamber system is between $5,000 and $12,000
  • Drip distribution systems (DDS): A DDS requires a secondary unit to retain wastewater once it has exited the septic tank, hence reducing the quantity of wastewater that may be discharged from the tank. The advantage is that it reduces the amount of dirt required in the drain field. A drip distribution system typically costs between $8,000 and $18,000
  • However, the price might vary. Mound systems: If the drainage field is required to be elevated above the tank, a mound system will be necessary. The wastewater is pushed up to the drain field by a pump tank, which means that this system needs more power and requires more maintenance on average. They range in price from $10,000 to $20,000
  • When your property is located on a high water table, this sort of system may be the best option for you. Recirculating sand filter systems A pump moves the effluent to a sand filtering system, where it is treated to remove the majority of toxins before it reaches the soil. It is estimated that the cost of these systems will range between $7,000 and $18,000. Evapotranspiration Systems: These systems are really only for persons who live in dry locations. The effluent evaporates into the atmosphere and never reaches the land or groundwater in this location. They cost between $10,000 and $15,000 to install
  • Constructed wetland systems: These systems are designed to look and function like natural wetlands. They require more area in order to function correctly, but the effluent is fully filtered. They range in price from $8,000 to $15,000, with expenses increasing if you want to construct an aerobic tank.

Your tastes, household size, soil conditions, and property characteristics will all have an impact on which option is best for you.

Signs your septic tank is full

If you detect any of the following signs around your property, it is possible that your septic tank is either full or damaged:

  • Drains take a long time to drain
  • An inoperable or slow-flushing toilet
  • A toilet that won’t flush at all
  • The sound of gurgling after flushing a toilet or turning on the water The smell of sewage in the yard
  • It is important to have a lush grass, especially surrounding your septic tank. a puddle of water on the lawn

Any of these indicators might indicate that something is wrong with your septic tank, but there is a significant difference between a damaged tank and a tank that is overflowing with waste. Pumping may be used to empty a clogged septic tank, and it should only cost you $300 to $600 to do so. A faulty septic tank, on the other hand, will require either repair or replacement, which will almost always result in a higher financial outlay.

How much does it cost to repair a septic tank?

If your tank isn’t functioning correctly, you might be looking at a $1,500 bill for repairs. However, it is possible that the problem is not with the tank itself, but with another component of the septic system. It all boils down to whatever portion of the system is malfunctioning:

  • Pump repairs might cost anything from $250 and $400. The cost of replacing your filter will be in the $200 to $300 area. Repairing baffles might cost anything from $100 to $900. Septic line repairs typically cost roughly $1,500, but it is not uncommon for them to cost as much as $4,000 in some cases.

Generally speaking, if you can get your septic tank or system fixed while still getting many years out of it, that is the most advantageous alternative. Not all issues, on the other hand, can be resolved. Septic tank professionals should evaluate the following factors when advising you on whether repair or replacement is the best course of action for your home:

  • Are puddles developing in a short period of time? Ponds in the yard aren’t usually a big deal, at least not in the long run. Puddles in the yard that form fast over night, on the other hand, are an entirely different story. The presence of puddles shows that the septic tank is nearly full, but it might also signal that there is a problem with the pipes or with the leach field, as well. The presence of large puddles often indicates a more serious problem, such as a damaged tank that would necessitate tank replacement. What is the size of your family? Septic tanks that are greater in size are required for larger homes. A bigger tank that can accommodate your growing family may be a smart choice if your home has increased over the years but your tank has not. How often do you find yourself in need of repairs? While a single repair isn’t a major concern, when repairs become more frequent, it’s time to take stock of your situation. A faulty septic system is almost certainly on its way out, which means you’ll have to pay to get it replaced.

Whether you’re repairing or replacing your unit, it’s important to remember that if your septic tank is still under warranty, you may expect to save a significant amount of money on your out-of-pocket expenditures. While some new septic tanks come with guarantees from the manufacturer, a house warranty may be available to cover older ones as well if they have been neglected.

However, should something go wrong with your septic tank, you may only be required to pay a modest service charge before your warranty provider covers the remainder of the cost of the repair or replacement.

How much does it cost to replace a septic tank?

A single-family home’s septic tank will cost between $3,000 and $10,000 to repair, depending on the situation. However, the price of your septic tank and the cost of installation are the two factors that have the greatest impact on your entire cost. The cost of a septic tank varies depending on the kind and size of the tank in question. Unless you wish to go bigger to allow future development, the size of your tank is normally dictated by the size of your household. There isn’t much flexibility there.

  • Concrete tanks: The cost of a concrete tank before construction might range from $700 to $2,000
  • Tanks made of fiberglass: A fiberglass tank can cost anywhere between $1,200 and $2,000 before installation. The cost of a polyethylene (plastic) tank is the most variable choice, ranging from $500 to $2,500 before installation
  • Nonetheless, this is the least expensive alternative.

The use of steel tanks is also a possibility, although they are less popular and more susceptible to corrosion.

How much does it cost to install a septic system?

Installation fees typically account for 50 percent to 70 percent of the total cost of a septic tank replacement. In order to ensure that you’re receiving a decent bargain, it’s critical to shop around for estimates before making any decisions. Listed below is a breakdown of what your labor costs are used to fund:

  • Perc test: A perc test analyzes the ability of your soil to absorb and filter water in a given amount of time. It entails the technician digging a 2- to 3-foot hole and pouring water into it to see how quickly the water disappears. A perc test will cost you anything from $750 and $1,850. Permits for construction: The cost of obtaining a construction permit varies from municipality to municipality. They normally cost between $400 to $2,250, but you may pay more if you want to construct an alternative septic system or if you live in a high-priced neighborhood. Costs of excavation: A completed wetland septic system should cost you between $1,200 and $4,500, but the cost will rise dramatically if you additionally install a pump or choose to go with the latter option. Traditional septic systems do not require electrical work, but any system that includes a pump or other mechanical device will necessitate the installation of electrical wiring and equipment. Due to the fact that your local electrician will decide the pricing and their effort is dependent on how much underground electrical line they have to build, it is difficult to estimate this cost.

The cost of your drain field or leach field, as well as the piping that connects your home to the tank, will be significantly higher if you’re building a septic system from the ground up from the beginning. A new drain field might cost up to $15,000, depending on its size.

How long does a septic tank last?

In general, septic tanks survive 20 to 30 years, although some can live up to 40 years or more. The material used to construct a septic tank, as well as how often it is cleaned, determine how long it will last. Steel septic tanks, which are less common, may rust out after 15 years, but many endure much longer. Concrete tanks have longer life spans, however they might be vulnerable to acidic soils due to their construction. Plastic and fiberglass tanks are less vulnerable to the weather, although structural degradation is a greater worry with these types of containers.

Pumping and maintaining your tank on a regular basis will guarantee that it continues to function properly for many years to come.

Bottom line

When dealing with septic tank problems, there is a lot to consider. Even while it is vital to seek expert counsel, it is also beneficial to be prepared so that you can make informed judgments. In order to learn about your alternatives, whether you’re budgeting for a new tank or attempting to maintain existing system functioning, it’s a good idea to shop about, study reviews, and obtain different quotations. If you’re just planning ahead or concerned about septic tank bills in the future, consider purchasing a home warranty to help cover the expenses.

The authors at ConsumerAffairs draw their inspiration for their work mostly from government statistics, industry experts, and original research published by other credible media. Visit ourFAQ page to find out more about the information on our site and how to use it.

  1. “Types of Septic Systems,” published by the United States Environmental Protection Agency (EPA). On September 26, 2021, the United States Environmental Protection Agency (EPA) published “How Your Septic System Works,” which was accessible online. United States Environmental Protection Agency (EPA), “How to Care for Your Septic System,” accessed on October 11, 2021
  2. “How to Care for Your Septic System.” On the 11th of October, 2021, it was accessible.

Did you find this article to be informative?|

How Much Does a Septic System Cost: Replacement and New

If your septic system is in need of replacement, call us today. Is it important for you to know how much it will cost to rebuild your septic system? In the event that you’re thinking of purchasing a home that will require a new septic tank system or obtaining a construction loan to develop a new property, you may be interested in knowing the average cost of a septic system. It is quite expensive to purchase such a system because it takes a substantial amount of labor from your contractor. A variety of factors influence the cost of a conventional septic system.

What is a Septic System, and How Does it Work?

A septic system is an underground wastewater treatment facility that is most commonly employed where there is no access to a municipal sewage system. Instead of urban regions, they are more typically seen in rural locations. A basic septic system is comprised of three components: a septic tank, a distribution box, and a leach field (or leach field). A leach field is also referred to as a drain field or a soil absorption field in some circles. A septic tank aids in the digestion of organic matter and the separation of floatable stuff such as fats, oils, and solids from wastewater in the treatment process.

See also:  Where To Buy Concert Septic Tank? (Solution)

The first septic tanks were put in place in the late 1800s, but it was not until the 1960s that they began to gain widespread acceptance.

How Much Does a Septic Tank Cost?

The cost of a septic tank is determined by a variety of factors. The number of bedrooms in your home is the single most important element in determining how much you will have to pay for a septic tank installation. More bedrooms imply a greater number of potential tenants, as well as a greater capacity septic tank required. The size of a septic tank for a three-bedroom house is typically 1000 gallons in capacity. The price of a 1000-gallon septic tank ranges from around $600 to $1200. Please keep in mind that the cost of a product might vary greatly depending on where you are located on a price spectrum.

A bigger septic tank will cost you between $1200 and $2000, depending on its size.

When it comes to septic systems, however, this is not where the most expensive parts of the system are located.

When considering the installation of a new septic system or the replacement of an existing one, consider how much money will be spent on the leaching area.

The location of your property, the quality of the soil, and the presence or absence of a water table are all factors that might influence the cost of your septic system installation.

The Cost of Septic System Installation

Understanding how much it will cost to replace a septic system is significantly more important than understanding how much it will cost to replace a tank. When compared to the expense of repairing a leach field, the cost of replacing a septic tank is comparatively affordable. The cost of replacing a leach field might range from $5000 to $50,000 or even more!. That is right; you read that correctly. The cost of a septic system replacement can vary greatly depending on a number of factors, including the soil’s health, the level of the water table, the presence of designated wetlands nearby, and the location of your property.

  • The engineer will begin by doing a land survey to assess the costs of the system replacement.
  • They will create what is known as a “as-built” model, which depicts how the system is put together.
  • They make use of the information gathered from these tests in order to build a septic system that will work effectively.
  • Due to the fact that clay-rich soils must be replenished by trucking in gravel, having clay-rich soils increases the cost of the project.
  • Local health officials will almost certainly require that the septic system be elevated 3-4 feet above the water table.
  • If your property is located in an area with a high water table, you might expect to pay a higher installation fee.
  • Your installation expenses will be significantly increased as a result of this.

Who Installs Septic Systems?

A septic system’s replacement cost is significantly more important than the cost of a tank replacement. When compared to the expense of rebuilding a leach field, the cost of replacing a septic tank is comparatively low. A leach field replacement might cost anything from $5000 to $50,000 or even more. The above statement is accurate. Several variables contribute to the wide range in septic system replacement prices, including the quality of the soils, the level of the water table, whether or not there are any designated wetlands nearby, and the location of the property.

  • The engineer will begin by doing a land survey to assess the costs of the replacement.
  • In order to demonstrate how the system is developed, they will design a “as-built” model.
  • A well functioning septic system is designed with the information gathered from these tests in mind.
  • Because clay-rich soils must be replenished by trucking in gravel, having clay-rich soils increases the cost of construction.
  • In most cases, the local board of health will require that the septic system be installed 3-4 feet above the ground water table.
  • If your property is located in an area with a high water table, you should expect to pay a higher installation price.

This sort of circumstance will necessitate the use of a considerable volume of material by your contractor in order to boost the height of the leaching field. Your installation expenses will be significantly increased as a result of this.

Why Do Septic Systems Fail?

Septic systems, like many other things, will eventually fail to work correctly after many years of use. The way you care for and maintain your system has a huge impact on how long it will endure and perform. For example, having a waste disposal in conjunction with a septic system is strongly discouraged. Food and other garbage are not intended to be flushed down the toilet or into a septic system. Over time, these obstructions can choke leach lines, resulting in a situation in which the system is unable to perform its functions correctly.

Only biodegradable items should be flushed down a toilet, according to EPA guidelines.

By properly maintaining your septic system, you may extend its life expectancy by several years.

Buying and Selling a Home With a Septic System

When purchasing or selling a house, it is essential to have the septic system inspected. It is a substantial obstacle to overcome, much like a house inspection. Nobody wants to purchase a lemon and then have to incur the additional price of replacing a septic system, which might cost thousands of dollars. Septic system inspections are required by law in certain places, and in others they are optional. A requirement known as Title Vrequires a seller in the state of Massachusetts to check their septic system before they may sell their home.

  • Title V septic inspections are usually between $700 and $1000 in price.
  • If the seller’s septic system fails the inspection, he or she has two options.
  • By completing the escrow holdback, the agreed-upon closing date may be maintained uninterrupted.
  • For example, if the cost of replacing the septic system is $20,000, they will request a holdback of $30,000 from the sale.
  • Over the years, I’ve sold a number of homes that had a broken septic system, and we finalized the transaction by putting an escrow holdback on the property.
  • As a result of your actions, you may find yourself in court.

Getting a Septic System Replacement Loan

Is it possible to receive a loan to rebuild your septic system?

This is a question that I’ve received several times throughout the years. Yes, and some governments will also give financial aid in the form of grants. Here is a list of resources that can assist you in obtaining finance for septic system replacement.

You Need a Permit for Your Septic System

It is necessary to get a permission from the county clerk’s office, the environmental or zoning department, or both, before you can begin your installation. Depending on the state you live in, you should anticipate to pay between $300 and $500 for this service. Permits for business usage might cost up to three times as much as residential permits.

When is the Septic Tank Installed During a New Build?

Your contractor will have to wait until the frame of the house is complete before doing the groundwork essential for the installation of the septic system. A hole excavated before to this time may cause problems with the building process and cause it to be delayed. Trucks parking on the lot would have to be carefully positioned in order to prevent hitting the hole, which might jeopardize the work and increase your expenditures. Most of the time, your contractor will include the cost of installing your septic system in the total cost of your project.

Here are some additional questions to ask a builder if you are constructing a home for the very first time.

Video: How to Find Your Septic System

What is the location of your septic system tank? In this video, you will learn some useful suggestions on how to locate your septic system.

What to Know About Septic System Maintenance

Because the cost of septic system installation and the materials necessary is significant, you want to be certain that it lasts as long as possible before replacing it. If it is maintained on a regular basis, you should experience less difficulties with it and it should last longer before it has to be replaced. Pumping and cleaning the tank that will be used to remove the sludge will usually be included in the maintenance schedule. This should help the drain field to endure for a longer period of time before it has to be replaced.

However, if you have a large family of 6 or more individuals, this may be necessary on a yearly basis.

In addition to your geographic location, the cost of tank maintenance is determined by how easy it is to get to the tank.

How Do You Know When a Septic Tank System Needs Replacing?

Septic systems are typically good for 20 to 30 years, and in some cases even longer, before they need to be upgraded or replaced. Some symptoms might suggest that there is an issue with your computer’s operating system.

Green Grass

If you have grass growing over your drain field, does the grass appear to be growing more vigorously than in other areas? Are there any plants in the vicinity that are growing at a higher rate than the rest of the plants? If you can’t identify any other reason for this to be happening, it might be a hint that the drain field isn’t performing as it is supposed to.

Yard Puddles

Having a puddle in your yard despite the fact that it hasn’t rained may indicate that your drain field isn’t performing as planned by the manufacturer.

Assuming that there is an unpleasant stench along with the puddles, you can expect to discover that your septic system has failed.

Flushing Problems

A blocked toilet flush and the appearance of clogged pipes might indicate that there is a problem with the plumbing system in your home. An foul stench in the home might also be an indication that something is wrong with your septic system and needs to be addressed.

Overflowing

A tank that is overflowing indicates that it is not working properly. Septic tanks eventually collapse over time, especially if they have not been serviced on a regular basis.

Contamination

A septic system that does not function properly may cause well water to become contaminated, necessitating the need for immediate repair. If the local board of health determines that your property is filthy and has the potential to infect other properties in the area, they may decide to condemn it.

Cost to Replace a Septic System vs. Installing New

It is possible that you may need to replace your system, and the cost will be more than it would be if you had a new system constructed from the ground up. This might occur as a result of the price connected with the removal of the old system, as well as the possibility of contamination. In some cases, you may discover that all you need to do is replace the pump in order to have your septic system running properly once more. Pumps normally need to be replaced every 10 years and might cost between $1,000 and $2,000 to purchase and install.

When leach fields cease to function as intended, they nearly usually require replacement or repair.

Miscellaneous Septic System Repair Costs

If you do need to replace your system, the cost may be more than if you had a brand new system constructed from the ground up, depending on your situation and your budget. Due to the price of removing the old system as well as the possibility of contamination, this may be necessary. In some cases, you may discover that all you need to do is replace the pump in order to get your septic system up and running again. Pumps normally need to be replaced every 10 years and might cost between $1,000 and $2,000 to purchase and maintain.

When leach fields stop operating as intended, they nearly invariably require replacement.

  • The baffle is a component of the septic tank that prevents the accumulation of scum in the tank’s inlets and outflow pipes. It should be replaced every five years. Approximately $300-600 will be spent to replace it. Tank cover – Because the tank cover is composed of concrete, it is susceptible to deterioration over time. Approximately a few hundred dollars is required to replace one of these devices. a concrete distribution box (also known as a D-box for short) is a smaller tank that is responsible for distributing liquids out to the leach field. The typical cost of replacing a distribution box is between $600 and $1300.

Can You Repair a Septic Leach Field?

Years ago, the answer to this question would have been no; a septic leach field could not be repaired. Today, the answer is yes. Today, it is more likely that you will be able to avoid the costly and time-consuming process of replacing the entire leach field. Septic aeration is a technique that has been developed. It is essentially a matter of adding oxygen to wastewater using aeration machines that dissolve oxygen to encourage aerobic digestion. A classic septic system operates in an anaerobic (oxygen-free) environment, resulting in the formation of a black, sludge-like layer in the leach field known as the biomat.

The septic system eventually fails as a result of this.

It may be built in a short amount of time. With the addition of oxygen to the septic tank, aerobic bacteria will flourish, consuming twenty to thirty times the amount of organic material that anaerobic bacteria would eat.

How Septic Aeration Works

As a result of the aerobic bacteria, the amount of nutrients in the septic tank effluent that the biomat needed to survive and develop has been greatly reduced. The biomat eventually succumbs to the elements. Aerobic bacteria that exit the septic tank along with water that contains high amounts of dissolved oxygen feed on the biomat, causing it to shrink even further in size and effectiveness. The mechanism causes the biomat to diminish in size until it is no longer visible on the surface. It will take many weeks for the earth and sidewalls of the leach field to revert to a porous state, and the aerobic septic system will work as if it had just been constructed.

What you avoid with septic aeration is the need to dig up your yard and the expenditure of tens of thousands of dollars.

A septic system firm in your area should be able to offer you with such information as well.

Final Thoughts on The Costs of Septic Systems

In the construction of a home, septic systems are one of the most expensive components that must be purchased and installed. The cost of replacing a septic system can be quite expensive. Unfortunately, when it comes to increasing the market value of your property, rebuilding your septic system has minimal effect. This investment yields a poor return on its initial investment. A new septic system is not likely to have a substantial influence on the value of your house. This advice on the cost of replacing a septic tank and leach field should have been beneficial to you, and we hope you found it so.

If you need to reach Bill, you may do so through email at [email protected] or by phone at 508-625-0191.

Are you contemplating the sale of your home?

The following towns in Metrowest Massachusetts are served by my Real Estate Sales: Ashland; Bellingham; Douglas; Framingham; Franklin; Grafton; Holliston; Hopkinton; Hopedale; Medway; Mendon; Milford; Millbury; Millville; Natick; Northborough; Northbridge; Shrewsbury; Southborough; Sutton; Wayland; Westborough; Whitinsville; Worcester; Upton; and Uxbridge MA.

DescriptionFind out how much it costs to install a new septic system as well as how much it costs to replace an old septic system in this article. Author Bill Gassett is a writer who lives in New York City. Name of the publisher Real Estate Exposure to the Fullest Extent Logo of the publisher

Leave a Comment

Your email address will not be published. Required fields are marked *