Our 1000 gallon septic tank, made with precast concrete, is designed to hold 1000 gallons of liquid.
1,000 Gallon Concrete Septic Tank Overview.
| 1000 Gallon Septic Tank Dimensions & Details | |
|---|---|
| Tank dimensions | 8′ x 5’8” x 5’2” |
16
- A 1000-Gallon heavy duty septic tank usually measures 96” L x 78” W x 61” H. A low-profile tank measures 120” L x 67” W x 57” H. However, the internal structures and the outside dimensions of the tank might slightly vary, depending on the thickness of construction.
What are the dimensions of a standard septic tank?
A typical residential septic tank is usually about 4.5 feet wide x 8.0 feet long x 6 feet tall. Your septic tank may be a different size however.
Is a 1000 gallon septic tank big?
The larger your home, the larger the septic tank you’re going to need. For instance, a house smaller than 1,500 square feet usually requires a 750 to 1,000-gallon tank. On the other hand, a bigger home of approximately 2,500 square feet will need a bigger tank, more than the 1,000-gallon range.
How often do you pump a 1000 gallon septic tank?
But here are some general guidelines: Family of 2, 500-gallon tank – pump every 2.5 years. Family of 3, 1000-gallon tank – pump every 4 years. Family of 5, 1000-gallon tank – pump every 2 years.
How do I calculate the size of my septic drain field?
Drainfield Size
- The size of the drainfield is based on the number of bedrooms and soil characteristics, and is given as square feet.
- For example, the minimum required for a three bedroom house with a mid range percolation rate of 25 minutes per inch is 750 square feet.
What is a good size septic tank?
The recommendation for home use is a 1000 gallon septic tank as a starting point. The 1000 gallon size tank is a minimum and *can be suitable for a 2 bedroom, 3 bedroom house. Some recommendations say to add an extra 250 gallons of septic tank capacity for each bedroom over 3 bedrooms.
Can you have a septic tank without a leach field?
The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.
How often should a septic tank be pumped?
Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.
What Are The Dimensions Of 1000 Gallon Septic Tank?
Disclosure: This post contains affiliate links, which means that if you purchase a product after clicking on one of our links, we may receive a commission or free product from the firms featured in this post. Amazon is a good illustration of this. Knowing the physical dimensions of a septic tank, which is designed to hold a capacity of 1000 gallons of wastewater, is important for a variety of reasons. When a septic tank is in need of repair or cleaning by specialists, it is critical to know the size of the tank in question.
So, what are the measurements of a 1000-gallon septic tank?
The dimensions of a low-profile tank are 120″ L x 67″ W x 57″ H.
To learn why an aseptic tank should not be too deep or too shallow, continue reading this article.
Dimensions of a septic tank
CALL 1.855.925.0760 FOR A LOCAL SEPTIC QUOTE
If you are considering having a septic tank placed, you should be aware of the many types of tanks that are often utilized in residential settings. These are the ones:
- Concrete tanks, plastic or polyethylene tanks, fiberglass tanks, and other types of tanks are available.
A septic tank with a capacity of 1000 gallons may have modest differences in size based on the kind of tank being installed (whether it is a fiberglass tank, plastic tank or concrete tank). As a result, it is necessary to have a basic awareness of the kind of septic tank in order to comprehend the dimension elements involved.
CALL 1.855.925.0760 FOR A LOCAL SEPTIC PUMPING QUOTE
There are a number of variables that influence the size of any septic system that you may require in your home. The system’s dimensions are determined by the size or capacity of the tank, as well as the type of tank used in it (as mentioned above). Consequently, the size of a septic tank is determined by the square footage of the property. It is dependent on the number of bedrooms in the house as well as the total number of people who live in the residence. Here are some facts about the size and dimensions of a septic tank to help you understand them better:
| Type of Tank | Tank Capacity | Tank Length (inches) | Tank Width(inches) | Tank Height(inches) |
| Concrete Septic Tank | 1000 Gallon – Heavy Duty | 96 | 78 | 61 |
| 1000 Gallon – Low Profile | 120 | 67 | 57 | |
| Plastic or Fibreglass Septic Tank | 1050 Gallon | 126 | 60 | 51 |
| Steel Septic Tank | 1000 Gallon | 58 | 58 | 96 |
Understanding Septic Tank Sizes
A septic tank on any property is the initial point of contact for wastewater that is discharged from a dwelling. This effluent then remains in the septic tank for an extended period of time. Several processes are taking on inside the tank during this time period, which are detailed below. Solids are separated from liquids during this step of the process. Once this is completed, the solids are filtered out and the remaining water is allowed to flow away through the drainage field.
The size or dimensions of the septic tank, on the other hand, are critical in order for all of this to occur properly. When specialists build a septic tank, they take into consideration a number of critical factors. Among these considerations are:
- The total number of square feet of the property
- There are several bedrooms in the house. There will be a certain number of individuals that will use the property. The frequency with which guests arrive
- The frequency with which major meetings, parties, or get-togethers are held
When homeowners seek the assistance of professionals, things become much simpler. When installing a septic tank, professionals take into account all factors and guarantee that the tank is the appropriate size and proportions. It should also be mentioned that if there are additional users, the capacity of the tank should be increased by 180 litres for each extra user.
In Case the Septic Tank is Smaller – What Happens?
The tank’s dimensions are determined by the size of the tank. Multiple issues will develop if the septic tank is too small and insufficient in capacity. This means that it will be unable to handle the volume of wastewater that will be generated on the land. If the septic tank is lower than the required capacity, then a variety of unpleasant problems may occur. This can manifest itself in the form of offensive and stinky odors, overflowing tanks, and blockages. The most serious issue that can develop as a result of a tiny tank’s capacity is that the resulting pressure can force liquids to escape before they have had a chance to be adequately filtered.
Consequently, there will be issues with blocks and overflows.
CALL 1.855.925.0760 FOR A LOCAL SEPTIC QUOTE
The tank’s dimensions are determined by its size. Multiple issues will develop if the septic tank is too small and insufficient in size. This means that it will be unable to handle the volume of wastewater that will be generated on the land. If the septic tank is lower than the required capacity, then a variety of unpleasant problems may result. Symptoms of this include offensive and stinking odors, overflowing tanks, and blockages. The most serious issue that can arise as a result of a small tank’s size is that the pressure created as a result of the pressure can cause liquids to escape before they have had a chance to be properly filtered out.
If this occurs, there will be issues with obstructions and overflows.
Considering the Features of Your House to Determine the Septic Tank SizeDimensions
The requirements of the family must be taken into consideration first and foremost when a homeowner considers the construction of a septic tank. There are various aspects of a home that must be considered while designing it. When purchasing a home, keep the following in mind:
- More than one dishwasher
- More than one kitchen
- More than one bathroom
- Showers with waterfalls
- Low-flow devices
- A hot tub, a swimming pool, and an indoor spa are available.
All of these items are regarded to be nice elements in any home and should be included. In addition, because of the increased water flow, these luxury features will raise the demand for a septic tank with a greater specified size because of the increased water flow. Because of the increased demand for water, it is possible that the tank may need to be larger.
CALL 1.855.925.0760 FOR A LOCAL SEPTIC QUOTE
- Approximately how many bedrooms can be supported by a 1000-gallon septic tank
A 1000-gallon septic tank has the capacity to support a three-bedroom house. The property should have a maximum square footage of 2500 square feet. For further information, please see this page. For example, a 1000-gallon tank may accommodate a three-bedroom home.
It is preferred that the property be less than 2500 square feet in size. More information may be found by visiting this link.
- The frequency at which you should pump a 1000-gallon septic tank
The average septic tank holds 1000 gallons and may be pumped once every five years if it is utilized by two persons. If, on the other hand, the same tank is utilized by eight people, it should be pumped out once a year. More information on septic tank pumping can be found by clicking here.
- How many lids would a 1000-gallon septic tank be able to accommodate
It will require two lids due to the size of the container. When cleaning or pumping the tank, two lids will provide you simple access to the whole tank. Depending on where you live, a 1000-gallon septic tank might cost between $800 and $900. It is dependent on your geographical area as well as the contractor you hire. Your local contractor will be able to give you an accurate estimate of the cost.
- In order to pump a 1000-gallon septic tank, how much will I have to pay?
In order to pump a tank with such a capacity, a user may be required to spend anywhere between $225 and $400, depending on the circumstances. More information about septic tank pumping expenses may be found here. The usefulness and functionality of a septic tank are greatly influenced by the size of the tank. As a result, only professionals can assess the size of a septic tank after taking into account a variety of elements. More information may be found at:1000 Gallon Septic Tank Owners Guide.
CALL 1.855.925.0760 FOR A LOCAL SEPTICQUOTE
| Table of ConcreteSeptic TankOutsideDimensions,Capacity,Other Data | ||
|---|---|---|
| Rectangular ConcreteSeptic Tank Size(Gallons Capacity) | Tank Length(Inches) | Tank Width(Inches) |
| 1000heavy duty | 96 | 78 |
| 1000low profile | 120 | 67 |
| 1000/600 | 145 in. | 68 in. |
SEPTIC TANK WITH 1000 GALLON CAPACITY102″ LENGTH69″ WIDTH59″ HEIGHT59″ WEIGHT 8600 LBS. As a result, the issue becomes, how much does a 1000 gallon concrete septic tank cost? The majority of septic tanks are constructed of concrete, although they can also be constructed of steel, fiberglass, or polyethylene. A 1,000-gallon precast concrete tank, which is sufficient for a three-bedroom house, typically costs between $600 and $1,000. Specifically, how do I determine the size of my septic tank in this regard?
The majority of home septic tanks are between 750 and 1,250 gallons in capacity.
What is the maximum capacity of a septic tank?
| Name | Capacity |
|---|---|
| 750 Gallon Septic Tank – 1 Compartment / 2 Manholes | 750 Gallons |
| 750 Gallon One Compartment Plastic Septic Tank | 750 Gallons |
| 750 Gallon 1 Compartment Plastic Septic Tank (Loose Plumbing) | 750 Gallons |
| 750 Gallon 1 Compartment NexGen Septic Tank (Loose Plumbing) | 750 Gallons |
Septic Tanks
Listed below is a list of the septic tanks, chlorine contact tanks, and siphon dose tank packages thatCamden Supplyoffers, along with detailed descriptions of their features and specifications. Please call Camden Supply and chat with one of our staff if you require further information on a certain product.
Single Compartment Septic Tanks
A one-compartment steel-reinforced concrete septic tank, according to the script. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:
- Overall height is 56 inches
- Overall length is 79 inches
- Overall width is 48 inches
- Height to center line of inlet is 48 inches
- Height to center line of outflow is 45 inches
- Weight is 5,000 pounds.
600 Gallon Single Septic Tank
Specifications:
- Overall height is 62 inches. Overall length is 79 inches. Overall width is 48 inches. 52″ is the height from the center line of the intake. 49″ from the floor to the center line of the outlet
- 5,000 pounds in weight
1000 Gallon Single Septic Tank
Septic tank with a single compartment made of steel reinforced concrete (SRC). Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:
- Overall height is 60 inches
- Overall length is 96 inches
- Overall width is 67 inches
- Height to center line of inlet is 52 inches
- Height to center line of outlet is 49 inches
- Weight is 8,000 pounds.
1250 Gallon Single Septic Tank
A one-compartment steel-reinforced concrete septic tank with the lower portion cast as a single piece so that there are no seams that come into touch with effluent. Specifications:
- Overall height is 60 inches
- Overall length is 117 inches
- Overall width is 68 inches
- Height to center line of inlet is 52 inches
- Height to center line of exit is 49 inches
- Weight is 10,400 pounds.
1500 Gallon Single Septic Tank
Specifications:
- Overall height is 60 inches
- Overall length is 150 inches
- Overall width is 67 inches
- Height to center line of inlet is 52 inches
- Height to center line of exit is 49 inches
- Weight is 11,700 pounds.
25003500Gallon Single Septic Holding Tanks
Single Septic Holding Tank with a capacity of 2500 gallonsSpecifications:
- Overall height is 68 inches
- Overall length is 144 inches
- Overall width is 78 inches
- Height to center line of inlet is 61 inches
- Height to center line of outlet is 61 inches
- Weight is 16,000 pounds.
Single Septic Holding Tank with 35 00 Gallon CapacitySpecifications:
- Overall height is 98 inches
- Overall length is 144 inches
- Overall width is 78 inches
- Height to center line of intake is 91 inches
- Height to center line of exit is 91 inches
- Weight is 20,000 pounds.
Dual Compartment Septic Tanks
Description:Two-compartment tank with solids separator between the first and second compartments, holding 500 gallons and 500 gallons, respectively. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:
- Overall height is 60 inches
- Overall length is 96 inches
- Overall width is 67 inches
- Height to center line of inlet is 52 inches
- Height to center line of exit is 49 inches
- Weight is 10,000 pounds.
1250 Gallon Dual Septic Tank
Description:Two-compartment tank with a solids separator between the first and second compartments, holding 625 gallons and 625 gallons. Specifications:
- Overall height is 60 inches
- Overall length is 117 inches
- Overall width is 67 inches
- Height to center line of inlet is 52 inches
- Height to center line of exit is 49 inches
- Weight is 10,700 pounds.
1500 Gallon Dual Septic Tank
Description:Two compartment system with a capacity of 1000 gallons in the first compartment and 500 gallons in the second compartment. The dosage pump portion is usually found in the second compartment. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:
- Overall height is 60 inches
- Overall length is 150 inches
- Overall width is 67 inches
- Height to center line of inlet is 52 inches
- Height to center line of exit is 49 inches
- Weight is 11,700 pounds.
Triple Compartment Septic Tanks
Description:Three-compartment system with a solids separator between the first and second compartments. Each compartment holds 500 gallons. The dosage pump segment is usually found in the third compartment. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:
- Overall Height: 60”
- sOverall Length: 150”
- sOverall Width: 67”
- sHeight to center line of inlet: 52”
- sHeight to center line of outlet: 49”
- sWeight: 12,000 lbs
Chlorine Contact Tanks
Specifications:
- Overall height is 56 inches
- Overall length is 79 inches
- Overall width is 48 inches
- Height to center line of inlet is 48 inches
- Height to center line of outflow is 45 inches
- Weight is 5,000 pounds.
Siphon Dose Tank Packages
Specifications:
- It measures 56 inches in height, 79 inches in length, 48 inches in width, 48 inches in height from center line of intake, 48 inches in height from center line of outlet, and 5,000 pounds in weight. It is equipped with an indoor alarm and alarm float.
1000 Gallon Siphon Tank Package
Specifications:
- It measures 60 inches in height, 102 inches in length, and 67 inches in width. It measures 52 inches in height from the center line of the inlet and 52 inches in height from the center line of the outlet. It weighs 10,000 pounds. It comes with an indoor alarm and an alarm float.
1250 Gallon Siphon Tank Package
Specifications:
- It measures 60 inches in height, 117 inches in length, and 68 inches in width. It measures 52 inches in height from the center line of the inlet and 52 inches in height from the center line of the outlet. It weighs 10,400 pounds. It comes with an indoor alarm and an alarm float.
1500 Gallon Siphon Tank Package
Specifications:
- Overall height is 60 inches
- Overall length is 150 inches
- Overall width is 67 inches
- Height to center line of intake is 52 inches
- Height to center line of exit is 52 inches
- Weight is 13,000 pounds
- Includes indoor alarm and alarm float
1000 Regular
Regular septic tanks (model 1000) are the wastewater standard for the vast majority of residences. Featuring an integrated concrete input baffle as well as a Polylok PL-122 effluent filter with the industry’s first shut-off ball, this unit is a game changer.
Specifications:
- The design of the septic tank is monolithic
- The concrete is 4000 psi and set in 28 days
- The rebar is structural fiber grade-60. Precast concrete with air entrained in it: 6 percent (+-1 percent)
- Tank penetrations with rubber boots that are integrally cast
- Designed for non-traffic loading applications. Fill depths range from 0 to 36 inches
- Vacuum testing is offered for an extra fee.
The 1000 Regular septic tank is the wastewater standard for most residences, and it stores 1000 gallons of wastewater. Featuring an integrated concrete intake baffle as well as a Polylok PL-122/a>u00a0effluent filter with the industry’s first shut-off ball, this system is a must-have.
rn
Specifications:
rn
- Septic tank design with integrally cast tank penetrations and rubber boots. 4000 psi concrete at 28 days. Reinforced with structural fibersamp
- Grade-60 rebar. 6 percent (+-1 percent) air-entrained precast concrete. Vacuum testing is offered for an extra fee and may be done at any depth between 0 and 36 inches.rn The following are the attributes of the product:, description short:, available now:, available later:, id product27, out of stock:0, new:0, id product attribute:185, quantity wanted:1, extraContent:, allow oosp:true, category: septic-systems, category name: Septic Systems, link:, attribute price:0, price tax ex pricing parameters: 0
- Customizations: 0
- Rate: 0
- Tax name: 0
- Ecotax rate: 0
- Attributes comma lists: 0
- Attributes simple: 0
- Unit price: 0
- Customizations: 0
- Is customizable: false
- Show quantities: false
- Quantity label: Item
- Customer group discount:0
- Title, 1000
- Imagery on a regular basis:] The following are the defaults for the cart and the home page. The following are the defaults for the medium and the big page. The following are the defaults for the cart and the large page. id image: 52, position: 1, associatedVariants:, has discount:false, discount type:null, discount percentage:null, discount percentage absolute:null, price amount:0, regular price amount:0, regular price: $0.00, discount to display: $0.00, unit price full:, show availability:fals
Data sheet
Dimensions: 9 590 pounds; capacity: 1 000 gallon Exterior Dimensions64″ H x 5′-4″ W x 8′-0″ LInvert Out51 1/2″ Exterior Dimensions64″ H x 5′-4″ W x 8′-0″
Specific References
| Part Number: | A-AST-1000-1 |
| Capacity: | 1000 Gallons |
| Dimensions: | 101″L x 60″W x 60″H |
| Availability: | In Stock |
| Ships From: | IA |
| Description:Ace Roto-Mold septic tanks are stronger, easier to install, and less costly than old-fashioned concrete septic tanks- yet they still offer the quality construction and safety you expect. Manufactured from high-density polyethylene with U.V. inhibitors, Ace Roto-Mold tanks utilize a horizontal flow designed for below ground installations up to 36 inches. Ace Tanks are IAPMO approved and have passed strenuous stress tests. Each tank carries an individual serial code and is fully document from date of manufacture. Ace Roto-Mold septic tanks are designed and manufactured with rigorous quality controls. The trapezoidal deep-rib design and interior baffle system make Ace Tanks the industry choice. Only Ace tanks feature a custom-molded gasket in the lid. Manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties, eliminating the need for metal fasteners that can corrode and fail. |
| SKU | A-AST-1000-1 |
| Part Number | A-AST-1000-1 |
| Mfr. Part Number | AST-1000-1 |
| Capacity (Gallons) | 1000 |
| Dimensions | 101″L x 60″W x 60″H |
| Weight (lbs) | 441 |
| Material | Polyethylene |
| Manufacturer | Ace Roto-Mold / Den-Hartog |
| Availability | In Stock |
| Technical DrawingsGuides | |
|---|---|
| Technical Drawings | View Technical Drawing |
| Shipping From | IA |
| Freight Class | 300 |
| Shipping Length | 101 |
| Shipping Width | 60 |
| Shipping Height | 60 |
| Shipping Weight (lbs) | 441 |
What size of septic tank do I need?
Probably one of the last things on your mind when you are constructing a new house is the location of your septic system. After all, shopping for tanks isn’t nearly as entertaining as shopping for cabinetry, appliances, and floor coverings. Although you would never brag about it, your guests will be aware if you do not have the proper septic tank placed in your home or business.
septic tanks for new home construction
Probably one of the last things on your mind when you are constructing a new home is the installation of an adequate septic system. In the end, shopping for tanks isn’t nearly as entertaining as shopping for cabinets, appliances, and floor coverings, respectively. Nonetheless, even if you never show it off, your guests will be able to tell if you don’t have the proper septic system in place.
planning your drainfield
Here are some helpful hints for deciding where to locate your drainfield when you’re designing it.
- Vehicles should not be allowed on or around the drainfield. Planting trees or anything else with deep roots along the bed of the drain field is not recommended. The roots jam the pipes on a regular basis. Downspouts and sump pumps should not be discharged into the septic system. Do not tamper with or change natural drainage features without first researching and evaluating the consequences of your actions on the drainage field. Do not construct extensions on top of the drain field or cover it with concrete, asphalt, or other materials. Create easy access to your septic tank cover by placing it near the entrance. Easy maintenance and inspection are made possible as a result. To aid with evaporation and erosion prevention, plant grass in the area.
a home addition may mean a new septic tank
Do not make any big additions or renovations to your house or company until you have had the size of your septic system assessed.
If you want to build a house addition that is more than 10% of your total floor space, increases the number of rooms, or necessitates the installation of new plumbing, you will almost certainly need to expand your septic tank.
- For a home addition that will result in increased use of your septic system, your local health department will require a letter from you that has been signed and authorized by a representative of your local health department confirming that your new septic system is capable of accommodating the increase in wastewater. It is not recommended that you replace your septic system without the assistance of a certified and competent contractor.
how to maintain your new septic system
For a home addition that will result in increased use of your septic system, your local health department will require a letter from you that has been signed and authorized by a representative of your local health department confirming that your new septic system is capable of accommodating the increased wastewater. It is not recommended that you replace your septic system without the assistance of a certified and qualified expert.
- Make use of the services of a qualified specialist to develop a maintenance strategy. Make an appointment for an annual examination of your septic system. Utilize the services of an effluent filter to limit the amount of particles that exit the tank, so extending the life of your septic system. Waste items should be disposed of properly, and energy-efficient appliances should be used. Make sure you get your septic system professionally cleaned every 2 to 3 years, or more frequently if necessary, by an experienced and qualified expert
- If you have any reason to believe that there is an issue with your system, contact a professional. It is far preferable to catch anything early than than pay the price later. Maintain a record of all septic system repairs, inspections, and other activities
common septic questions
Here are some of the most frequently asked questions by our septic customers.
How do I determine the size of my septic tank?
If you have a rectangular tank, multiply the inner height by the length to get the overall height of the tank. In order to find out how many gallons your septic tank contains, divide the number by.1337.1337
How many bedrooms does a 500-gallon septic tank support?
The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size.
How deep in the ground is a septic tank?
Your septic system is normally buried between four inches and four feet underground, depending on the climate.
What size is a 1000 gallon septic tank?
| SteelSeptic TankTypicalDimensions | ||
|---|---|---|
| SteelSeptic Tank Size(GallonsCapacity) | TankLength (Inches) | TankDepth (Height) (Inches) |
| 1000 | 58 | 96 |
| 1250 | 58 | 120 |
| 1500 | 58 | 144 |
10,000 pounds Likewise, how much does a 1000 gallon septic tank cost to install? The average cost of a septic tank installation in the United States is $6,021, with the majority of homeowners spending between $3,102 and $9,441. Installation of a typical 1,000-gallon septic tank for a three-bedroom home can cost anywhere from $2,100 to $5,000, not including the cost of the tank itself, which typically ranges between $600 and $1,000.How do I determine the size of my septic tank, you may wonder.
The majority of home septic tanks are between 750 and 1,250 gallons in capacity.
The majority of septic tanks are constructed of concrete, although they can also be constructed of steel, fiberglass, or polyethylene.
1000 Gallon Septic Tank – Single Compartment. 60”D x 51”H x 127”L
- Similarly, how much does a 1000-gallon septic tank set you back? A septic tank installation costs on average $6,021, with the majority of homeowners spending between $3,102 and $9,441 on their project. Installation of a typical1,000-gallon septic tank for a three-bedroom home can cost anywhere from $2,100 to $5,000, not counting the cost of the tank itself, which typically ranges between $600 and $1,000.How can I calculate the size of my septic tank, you may wonder. Choosing the proper size of the septic tank is primarily determined by the square footage of the house and the number of people who will be living in it. The majority of residential septic tanks have capacities ranging from 750 to 1,250 gallons in capacity. A 1000 gallon concrete septic tank would most likely be required for a typical three-bedroom home with less than 2500 square feet of living space.How much does a 1000 gallon concrete septic tank cost to install? Although the majority of septic tanks are constructed of concrete, steel, fiberglass, and polyethylene are also common materials. One thousand gallon precast concrete tank, which is sufficient for a three-bedroom house, typically costs between $600 and $1,000 to install and maintain.
Notes
- All images and drawings are for illustrative purposes only and may not always depict the exact product being advertised. It is possible for dimensions on polyethylene tanks to differ by +/-3 percent (typical rotational molding tolerance). It is recommended that venting systems be sized to provide for a maximum pressure or vacuum of 1/2″ water column (0.018 PSI) in polyethylene water tanks when used for water storage exclusively at atmospheric pressure. The tank is composed of BPA-free and FDA-approved materials. The resin is produced in NSF-certified manufacturing facilities. The tank must be installed and used in accordance with the manufacturer’s instructions for usage and installation in order for the warranty to be valid. According to the tank manufacturer’s guidelines, flexible connectors must be used on all fitting connections.
- BPA-free and FDA-compliant
- High-quality and long-lasting construction
- 3-Year Manufacturer’s Warranty
- Currently in stock and available for purchase
$1,590.00 in U.S. dollars Prices on all products listed on our website are subject to change as a result of resin price increases that are beyond our control. Please contact our office to obtain verified price or to be placed on our waitlist for future availability (866-969-9404). Shipping and Handling Information
| Ships From | CA, NE, AR, WV, GA |
|---|---|
| Shipping Cost | Call 866-959-7593 for Shipping Quote |
Description
Septic tank with a single compartment made of HDPE. High-quality storage capacities are achieved via the use of state-of-the-art one-piece seamless construction. 1000 Gallon Single Compartment Schematic Illustration
| Capacity | 1000 |
|---|---|
| Length | 127″ |
| Width | 60″ |
| Height | 51″ |
| Material | High Density Polyethylene (HDPE) |
| Weight | 250 |
| Inlet | 3″ Pre Drilled hole with Septic T and Gasket |
| Outlet | 3″ Pre Drilled hole with Septic T and Gasket |
| Lid Size/type | (X2) 20″ NexGen D2 Lid and Gasket |
| Specific Gravity | 1.0 (Septic use only) |
| Manufacture | Snyder |
Additional Information
The size of an underground septic tank is referred to as its total volume handling capacity in this article, and it will be discussed in further detail later in this article. For additional information on above-ground septic tanks and systems, see our page on above-ground septic tanks. The minimum septic tank capacity requirements are determined by a variety of variables. State, county, and/or city regulations may specify permitted tank sizes, as well as tank materials and installation.
The size of the septic tank will vary depending on whether it is intended for domestic or commercial usage; in this section, we will cover residential use.
Shortly stated, the required size of a septic tank will be determined by the following factors: (1) the specific septic system type; (2) local government requirements; (3) the compatibility of the ground geology; and (4) the anticipated volume of wastewater depending on the size of the residence.
However, this is not true.
Furthermore, plastic septic tanks will not corrode, are weatherproof, are waterproof, are less expensive, are lighter, and are easier to build. They will also not float if they are constructed appropriately.
1) The Specific Septic System Type
There are seven different types of septic tank systems, and the size of the tank required will vary depending on the system you choose. The scope of this article does not allow for a comprehensive discussion of each system type and its associated size requirements. We are referring to traditional gravity-fed anaerobic septic systems in this context when we say “system type.” The anaerobic septic system is the most prevalent type of septic system, and it is the one that most people think of when they imagine a septic tank.
- The following systems are available: conventional, gravity-fed, anaerobic systems
- Above-ground septic systems
- Pressure systems
- Anaerobic systems
- Mound systems
- Recirculating sand or gravel filters systems
- Bottomless sand filters systems
If your septic tank system is anything other than a traditional, anaerobic system, the instructions in this page may not be applicable in their entirety to your situation.
2) Local Government Regulations
The laws for septic tanks imposed by local governments vary greatly across the United States. In part, this is due to the significantly diverse soil geography and water features that exist from state to state and can even differ by a few miles in some cases. In order to determine the appropriate septic tank size and the best position on the land for installation, it is essential to consult with local government rules first. Take, for example, theWastewater Treatment Standards – Residential Onsite Systemsdocument from the New York State Department of Health, which provides a comprehensive informational overview of codes, rules, and regulations frequently promulgated by governing bodies, as well as common terminology and definitions in the industry.
3) Suitability of the Ground Geology
The subterranean soil type has a significant impact on the efficacy of the system and, consequently, the size of the septic tank. This topic is highly tied to the rules of the local government. In most cases, it is related to the standards and recommendations of a designated authority that regulates septic tank installations, which is typically the department of health. In order to determine whether or not the ground is suitable for a septic tank system, a trained specialist must come out to the prospective installation site and conduct a series of tests.
A perc test will assess whether or not the subterranean soil is capable of handling and filtering septic tank effluent in an appropriate manner.
Whether you are hiring an experienced professional or doing it yourself, it is your obligation to contact your local oversight agency and arrange for perc tests and/or ground area evaluations to be performed.
The findings of the analysis and testing will determine whether or not the chosen site is suitable, as well as whether or not a certain septic tank system or size is required.
4) The Expected Volume of Wastewater
The typical amount of wastewater that will be generated and that the septic tank will be able to manage is the most essential factor in determining the size of the septic tank that is required. In a home with simply a septic system, all wastewater is disposed of in the septic tank unless a separate system for managing greywater is in place to handle the waste. In order to calculate and approximate these values for residential dwellings, business structures, and facilities, extensive study has been carried out.
A 1000 gallon septic tank is recommended as a starting point for home use.
Some experts propose adding an additional 250 gallons of septic tank capacity for each additional bedroom over three bedrooms.
In many cases, this is true when considering the entire household rather than just one individual.*As previously stated throughout this article, septic tank size recommendations are highly variable depending on where you live, local government standards, underground soil type, house size and the amount of wastewater your specific home is expected to produce, among other considerations.
Minimum Septic Tank Capacity Table
For further information on the minimum septic tank capacity dependent on the number of residential bedrooms, please see the following table:
| Number of Bedrooms | Minimum Septic Tank Size | Minimum Liquid Surface Area | Drainfield Size |
|---|---|---|---|
| 2 or less | 1000 – 1500 Gallons | 27 Sq. Ft. | 800 – 2500 Sq. Ft. |
| 3 | 1000 – 2000 Gallons | 27 Sq. Ft. | 1000 – 2880 Sq. Ft. |
| 4 | 1250 – 2500 Gallons | 34 Sq. Ft. | 1200 – 3200 Sq. Ft. |
| 5 | 1500 – 3000 Gallons | 40 Sq. Ft. | 1600 – 3400 Sq. Ft. |
| 6 | 1750 – 3500 Gallons | 47 Sq. Ft. | 2000 – 3800 Sq. Ft. |
Take note of the following in relation to the table above:
- As defined by the State of New York, the Minimum Liquid Surface Area is the surface area given for the liquid by the tank’s width and length measurements. The range of Drainfield Sizes is depending on the kind of groundwater present. The State of Michigan provides the above-mentioned drainfield recommendations, which might vary greatly depending on local standards and terrain.
Additional Thought: Can a Septic Tank Be Too Big?
In the absence of consideration for cost, it is reasonable to ask: “Can a septic tank be too large?” The answer is a resounding nay. As long as the septic tank is placed appropriately, it is impossible for a septic tank to be too large; the only thing that can happen is that it is too little. According to the majority of suggestions, constructing a larger-capacity septic tank is frequently the safer and more preferable solution. The following are the reasons behind this:
- With a bigger septic tank, you can adapt for changes in household consumption, such as those caused by parties or long-term guests. In the event that your family grows in size or you want to make improvements to your house, such as adding more bedrooms and bathrooms or installing new plumbing fixtures, having a bigger septic tank can save you the expense of installing a new tank.
Takeaways | What Size Septic Tank Do I Need
The septic tank size recommendations offered here are merely that: suggestions. They are built on a foundation of information gathered from government and academic sources. The actual size of the septic tank you require will vary depending on the factors discussed in this article. There is no “one-size-fits-all” solution when it comes to determining the appropriate septic tank size for your property. There is a great deal of variation depending on where you reside. With addition to providing a basic insight into the septic tank and system size that may be most suited to your application, the providedMinimum Septic Tank Capacity Tablecan also assist in cost estimations.
Before beginning any septic tank installation project, check and double-check with the state, city, or local county’s agency that is in charge of septic tanks, soil testing, and permissions.
If you’re searching for a chart of tank sizes, have a look at our page on the many sizes and quantities of septic tanks available.
They are available in both single chamber and double chamber designs. Consider reading this article from Texas A M University, which provides an overview of onsite wastewater treatment systems, for further information on traditional septic systems.
Septic Tank Sizes Chart: Common Tank Capacities and Measurements
High density polyethylene, abbreviated HDPE, is the most often used material for modern septic tanks, with concrete being the second most common material. HDPE is a heavy-duty grade polyethylene that is used to manufacture a variety of items, including septic tanks, which are available in both underground and above-ground configurations. Because of the robustness and adaptability of HDPE, plastic septic tanks are available in a broad range of volume capacities and measurement measurements to suit any application.
Plastic septic tanks are less expensive than concrete tanks, they are easier to transport and install, they are more resistant to cracking and weathering, and they are available in a variety of shapes, volumes, and sizes to meet the specific needs of any application.
Our septic tank sizes chart contains the most often used tank capacity and measurements, which should be of assistance.
Underground Septic Tank Specifications Chart — Standard Septic Tanks
The following chart provides an overview of the requirements for conventional septic tanks.
| Volume (Gallons) | Dimensions (L x W x H) | Compartments | Liquid Surface Area (Sq. Ft.) | Manufacturer |
|---|---|---|---|---|
| 500 Gallons | 101″ L x 51″ W x 47″ H | 1 | 35.77 Sq. Ft. | Norwesco |
| 750 Gallons | 96″ L x 48″ W x 63″ H | 1 | 32.00 Sq. Ft. | Norwesco |
| 750 Gallons | 70″ L x 60″ W x 60″ H | 1 | 29.16 Sq. Ft. | Ace Roto Mold |
| 1000 Gallons | 102″ L x 60″ W x 63″ H | 1 | 42.5 Sq. Ft. | Norwesco |
| 1000 Gallons | 102″ L x 60″ W x 63″ H | 2 | 42.5 Sq. Ft. | Norwesco |
| 1000 Gallons | 101″ L x 60″ W x 60″ H | 1 | 42.08 Sq. Ft. | Ace Roto Mold |
| 1000 Gallons | 101″ L x 60″ W x 60″ H | 2 | 42.08 Sq. Ft. | Ace Roto Mold |
| 1250 Gallons | 116″ L x 55″ W x 70″ H | 1 | 44.30 Sq. Ft. | Norwesco |
| 1250 Gallons | 116″ L x 55″ W x 70″ H | 2 | 44.30 Sq. Ft. | Norwesco |
| 1250 Gallons | 118″ L x 58″ W x 72″ H | 1 | 47.53 Sq. Ft. | Ace Roto Mold |
| 1250 Gallons | 118″ L x 58″ W x 72″ H | 2 | 47.53 Sq. Ft. | Ace Roto Mold |
| 1500 Gallons | 135″ L x 55″ W x 70″ H | 1 | 51.56 Sq. Ft. | Norwesco |
| 1500 Gallons | 135″ L x 55″ W x 70″ H | 2 | 51.56 Sq. Ft. | Norwesco |
| 1500 Gallons | 137″ L x 58″ W x 72″ H | 1 | 55.18 Sq. Ft. | Ace Roto Mold |
| 1500 Gallons | 137″ L x 58″ W x 72″ H | 2 | 55.18 Sq. Ft. | Ace Roto Mold |
| 2000 Gallons | 126″ L x 98″ W x 51″ H | 1 | 85.75 Sq. Ft. | Norwesco |
| 2500 Gallons | 159″ L x 99″ W x 51″ H | 1 | 109.31 Sq. Ft. | Norwesco |
| 3525 Gallons | 211″ L x 102″ W x 51″ H | 1 | 149.46 Sq. Ft. | Norwesco |
| 5025 Gallons | 211″ L x 102″ W x 73″ H | 1 | 149.46 Sq. Ft. | Norwesco |
| 10000 Gallons | 356″ L x 101″ W x 107″ H | 2 | 249.69 Sq. Ft. | Norwesco |
Underground Septic Tank Specifications Chart — Low Profile Septic Tanks
The low profile septic tank parameters shown in the accompanying chart provide a general overview.
| Volume | Dimensions (L x W x H) | Compartments | Liquid Surface Area (Sq. Ft.) | Manufacturer |
|---|---|---|---|---|
| 500 Gallons | 97″ L x 48″ W x 42″ H | 1 | 32.33 Sq. Ft. | Norwesco |
| 750 Gallons | 92″ L x 60″ W x 51″ H | 1 | 38.33 Sq. Ft. | Norwesco |
| 750 Gallons | 92″ L x 60″ W x 51″ H | 2 | 38.33 Sq. Ft. | Norwesco |
| 1000 Gallons | 127″ L x 60″ W x 51″ H | 1 | 52.92 Sq. Ft. | Norwesco |
| 1000 Gallons | 127″ L x 60″ W x 51″ H | 2 | 52.92 Sq. Ft. | Norwesco |
| 1250 Gallons | 157″ L x 60″ W x 51″ H | 1 | 65.42 Sq. Ft. | Norwesco |
| 1250 Gallons | 157″ L x 60″ W x 51″ H | 2 | 65.42 Sq. Ft. | Norwesco |
| 1500 Gallons | 157″ L x 69″ W x 51″ H | 1 | 75.23 Sq. Ft. | Norwesco |
| 1500 Gallons | 157″ L x 69″ W x 51″ H | 2 | 75.23 Sq. Ft. | Norwesco |
Underground Septic Tank Specifications Chart — Septic Pump Tanks
The following chart provides an overview of the specifications for septic pump tanks.
| Volume (Gallons) | Dimensions (L x W x H) | Liquid Surface Area (Sq. Ft.) | Manufacturer |
|---|---|---|---|
| 200 Gallons | 47″ L x 47″ W x 56″ H | 15.34 Sq. Ft. | Norwesco |
| 225 Gallons | 47″ L x 47″ W x 56″ H | 15.34 Sq. Ft. | Norwesco |
| 300 Gallons | 48.5″ L x 48.5″ W x 53″ H | 16.34 Sq. Ft. | Snyder |
| 300 Gallons | 54″ L x 54″ W x 55″ H | 20.25 Sq. Ft. | Ace Roto Mold |
| 300 Gallons | 54″ L x 54″ W x 54″ H | 20.25 Sq. Ft. | Norwesco |
| 300 Gallons FL Approved | 54″ L x 54″ W x 54″ H | 20.25 Sq. Ft. | Norwesco |
| 500 Gallons | 60″ L x 60″ W x 63″ H | 25.00 Sq. Ft. | Snyder |
| 500 Gallons | 63″ L x 63″ W x 74″ H | 27.56 Sq. Ft. | Ace Roto Mold |
| 500 Gallons | 64″ L x 64″ W x 67″ H | 28.44 Sq. Ft. | Norwesco |
| 525 Gallons FL Approved | 64″ L x 64″ W x 67″ H | 28.44 Sq. Ft. | Norwesco |
Above Ground Septic Tank Specifications Chart – Septic Holding Tanks
The following chart provides an overview of the many types of above-ground septic tanks that are currently available, as well as their specs.
| Volume (Gallons) | Dimensions (L x W x H) | Liquid Surface Area (Sq. Ft.) | Manufacturer |
|---|---|---|---|
| 250 Gallons | 69″ L x 49″ W x 19.5″ H | 23.48 Sq. Ft. | NTO |
| 250 Gallons | 84″ L x 40″ W x 17″ H | 23.33 Sq. Ft. | Quadel |
| 300 Gallons | 95″ L x 56″ W x 16″ H | 36.94 Sq. Ft. | Ace Roto Mold |
| 300 Gallons | 95″ L x 56″ W x 16″ H | 36.94 Sq. Ft. | NTO |
| 350 Gallons | 88″ L x 44″ W x 25″ H | 26.88 Sq. Ft. | Quadel |
| 440 Gallons | 91″ L x 72″ W x 16″ H | 45.50 Sq. Ft. | NTO |
| 500 Gallons | 130″ L x 52″ W x 22″ H | 46.94 Sq. Ft. | Norwesco |
| 1000 Gallons | 136″ L x 91″ W x 20″ H | 85.94 Sq. Ft. | NTO |
Due to the possibility of change as well as variation in pricing as a result of sales prices, septic tank costs are not included in these table calculations. Please do not hesitate to contact us if you require any assistance or have any concerns regarding septic tank specifications, shipping, modifications, or anything else. We at the National Tank Outlet are always here to assist you with your liquid handling and transportation requirements. Alek Eccles is a technical writer and professional content developer that works in the technology industry.
Alek’s goal is to promote awareness of technological, chemical, and biological industries, systems, and ideas, as well as rainwater harvesting, plastics/thermoplastics, and containers used for general storage, handling, and transportation, among other things.
