What Are The Dimensions Of A 1000 Gal. Septic Tank? (Solution)

Our 1000 gallon septic tank, made with precast concrete, is designed to hold 1000 gallons of liquid.

1,000 Gallon Concrete Septic Tank Overview.

1000 Gallon Septic Tank Dimensions Details
Tank dimensions 8′ x 5’8” x 5’2”

16

Is a 1000 gallon septic tank big?

The larger your home, the larger the septic tank you’re going to need. For instance, a house smaller than 1,500 square feet usually requires a 750 to 1,000-gallon tank. On the other hand, a bigger home of approximately 2,500 square feet will need a bigger tank, more than the 1,000-gallon range.

What are the dimensions of the average septic tank?

A typical residential septic tank is usually about 4.5 feet wide x 8.0 feet long x 6 feet tall. Your septic tank may be a different size however.

How often do you pump a 1000 gallon septic tank?

But here are some general guidelines: Family of 2, 500-gallon tank – pump every 2.5 years. Family of 3, 1000-gallon tank – pump every 4 years. Family of 5, 1000-gallon tank – pump every 2 years.

How do I calculate the size of my septic tank?

The formula is length (feet) x width (feet) x 1 foot x 7.5 gallons, which is the volume for 1-foot depth. To find the volume for 1 inch I divide the volume by 12 to give me gallons per inch. For our example this is 5.16 feet x 7.5 feet x 1.0 foot x 7.5 gallons per cubic foot = 290.2 gallons.

How do I calculate the size of my septic drain field?

Drainfield Size

1. The size of the drainfield is based on the number of bedrooms and soil characteristics, and is given as square feet.
2. For example, the minimum required for a three bedroom house with a mid range percolation rate of 25 minutes per inch is 750 square feet.

What is a good size septic tank?

The recommendation for home use is a 1000 gallon septic tank as a starting point. The 1000 gallon size tank is a minimum and *can be suitable for a 2 bedroom, 3 bedroom house. Some recommendations say to add an extra 250 gallons of septic tank capacity for each bedroom over 3 bedrooms.

Are there different size septic tanks?

Septic tank sizes are measured in gallons, based on the amount of sewage the tank can hold. Standard tank sizes are typically 1,000, 1,250 and 1,500 gallons, and these suit most homes. Typically, the minimum tank liquid capacity of a one- to three-bedroom home is 1,000 gallons.

What Are The Dimensions Of 1000 Gallon Septic Tank?

Disclosure: This post contains affiliate links, which means that if you purchase a product after clicking on one of our links, we may receive a commission or free product from the firms featured in this post. Amazon is a good illustration of this. Knowing the physical dimensions of a septic tank, which is designed to store a capacity of 1000 gallons of wastewater, is important for a variety of reasons. When a septic tank is in need of repair or cleaning by specialists, it is critical to know the size of the tank in question.

So, what are the measurements of a 1000-gallon septic tank?

The dimensions of a low-profile tank are 120″ L x 67″ W x 57″ H.

To learn why an aseptic tank should not be too deep or too shallow, continue reading this article.

Dimensions of a septic tank

CALL 1.855.925.0760 FOR A LOCAL SEPTIC QUOTE

We would like to make you aware that this post contains affiliate connections, which means that if you purchase a product after clicking on one of our links, we may get compensation. Amazon is an example of this. Knowing the physical dimensions of a septic tank is important for a variety of reasons, not the least of which is that it is designed to store a capacity of 1000 Gallon of wastewater. When a septic tank is in need of repair or cleaning, it is critical to know the exact measurements of the tank.

So, what exactly are the dimensions of a 1000-gallon septic tank?

a low-profile tank with dimensions of 120″L 67″W 57″H However, depending on the thickness of the construction, the internal structures and the outward dimensions of the tank may somewhat differ.

Generally, septic tanks with a larger surface area and sufficient depth are the best choice in most cases.

• Concrete tanks, plastic or polyethylene tanks, fiberglass tanks, and other types of tanks are available.

A septic tank with a capacity of 1000 gallons may have modest differences in size based on the kind of tank being installed (whether it is a fiberglass tank, plastic tank or concrete tank). As a result, it is necessary to have a basic awareness of the kind of septic tank in order to comprehend the dimension elements involved.

CALL 1.855.925.0760 FOR A LOCAL SEPTIC PUMPING QUOTE

There are a lot of elements that influence the size of any septic system that you may require in your home. The system’s dimensions are determined by the size or capacity of the tank, as well as the type of tank used in it (as mentioned above). Consequently, the size of a septic tank is determined by the square footage of the land.

It is dependent on the number of bedrooms in the house as well as the overall number of people that live in the residence. Here are some statistics about the size and dimensions of a septic tank to help you understand them better:

 Type of Tank Tank Capacity Tank Length (inches) Tank Width(inches) Tank Height(inches) Concrete Septic Tank 1000 Gallon – Heavy Duty 96 78 61 1000 Gallon – Low Profile 120 67 57 Plastic or Fibreglass Septic Tank 1050 Gallon 126 60 51 Steel Septic Tank 1000 Gallon 58 58 96

Understanding Septic Tank Sizes

A septic tank on any property is the initial point of contact for wastewater that is discharged from a dwelling. This effluent then remains in the septic tank for an extended period of time. Several processes are taking on inside the tank during this time period, which are detailed below. Solids are separated from liquids during this step of the process. Once this is completed, the particulates are filtered out and the remaining water is allowed to run away through the drainage field. The size or dimensions of the septic tank, on the other hand, are critical in order for all of this to occur properly.

Among these considerations are:

• The total number of square feet of the property
• There are several bedrooms in the house. There will be a certain number of individuals that will use the property. The frequency with which guests arrive
• The frequency with which major meetings, parties, or get-togethers are held

When homeowners seek the assistance of professionals, things become much simpler. When installing a septic tank, professionals take into account all factors and guarantee that the tank is the appropriate size and proportions. It should also be mentioned that if there are additional users, the capacity of the tank should be increased by 180 litres for each extra user.

In Case the Septic Tank is Smaller – What Happens?

The tank’s dimensions are determined by the size of the tank. Multiple issues will develop if the septic tank is too small and insufficient in capacity. Because of the volume of wastewater that will be generated on the site, it will be unable to cope. The possibility of all kinds of unpleasant situations arises if the septic tank is smaller than the appropriate size. This can manifest itself in a variety of ways, including offensive and stinky odors, overflowing tanks, and obstructions. The most serious issue that might develop as a result of a tiny tank’s capacity is that the resulting pressure can cause liquids to escape before they have had a chance to be completely filtered out.

As a result, they will continue to accumulate in the septic tank.

CALL 1.855.925.0760 FOR A LOCAL SEPTIC QUOTE

In the same way that a septic tank that is too small can cause multiple difficulties, a septic tank that is too huge can cause several problems. A tank that is too large will not perform properly. The effluent will not be able to pass through it efficiently. For example, if you have an overly big septic tank, there may not be enough liquid accumulation, which might lead to an excessive buildup of germs. Because the processing will not take place organically if this occurs, the solids in the tank will not break down adequately as a result of this.

This will ensure that everyone’s health and full hygiene are protected.

Considering the Features of Your House to Determine the Septic Tank SizeDimensions

The requirements of the family must be taken into consideration first and foremost when a homeowner considers the construction of a septic tank.

There are various aspects of a home that must be considered while designing it. When purchasing a home, keep the following in mind:

• More than one dishwasher
• More than one kitchen
• More than one bathroom
• Showers with waterfalls
• Low-flow devices
• A hot tub, a swimming pool, and an indoor spa are available.

All of these items are regarded to be nice elements in any home and should be included. In addition, because of the increased water flow, these luxury features will raise the demand for a septic tank with a greater specified size because of the increased water flow. Because of the increased demand for water, it is possible that the tank may need to be larger.

CALL 1.855.925.0760 FOR A LOCAL SEPTIC QUOTE

• Approximately how many bedrooms can be supported by a 1000-gallon septic tank

In what amount of space a 1000-gallon septic tank can accommodate bedrooms; No, you should never drive over a septic tank with a capacity of 1000 gallons. In the event that you drive over the tank, damage to the pipes and leach field will occur. If the damage is extensive, the septic tank will malfunction, resulting in costly repairs to the system.

• The frequency at which you should pump a 1000-gallon septic tank

The average septic tank holds 1000 gallons and may be pumped once every five years if it is utilized by two persons. If, on the other hand, the same tank is utilized by eight people, it should be pumped out once a year. More information about septic tank pumping may be found by clicking here.

• How many lids would a 1000-gallon septic tank be able to accommodate

It will require two lids due to the size of the container. When cleaning or pumping the tank, two lids will provide you simple access to the whole tank. Depending on where you live, a 1000-gallon septic tank might cost between \$800 and \$900. It is dependent on your geographical area as well as the contractor you hire. Your local contractor will be able to give you an accurate estimate of the cost.

• Depending on where you live, a 1000-gallon septic tank might cost you \$800-\$900. What you pay for a contractor will vary depending on your region and who you choose. Your local contractor will be able to give you an accurate estimate of the price.

In order to pump a tank with such a capacity, a user may be required to spend anywhere between \$225 and \$400, depending on the circumstances. More information about septic tank pumping expenses may be found here. The usefulness and functionality of a septic tank are greatly influenced by the size of the tank. As a result, only professionals can assess the size of a septic tank after taking into account a variety of elements. More information may be found at:1000 Gallon Septic Tank Owners Guide.

CALL 1.855.925.0760 FOR A LOCAL SEPTICQUOTE

Table of ConcreteSeptic TankOutsideDimensions,Capacity,Other Data
Rectangular ConcreteSeptic Tank Size(Gallons Capacity) Tank Length(Inches) Tank Width(Inches)
1000heavy duty 96 78
1000low profile 120 67
1000/600 145 in. 68 in.

SEPTIC TANK WITH 1000 GALLON CAPACITY102″ LENGTH69″ WIDTH59″ HEIGHT59″ WEIGHT 8600 LBS. Aside from that, how much does a 1000-gallon concrete septic tank cost? The majority of septic tanks are constructed of concrete, although they can also be constructed of steel, fiberglass, or polyethylene. A 1,000-gallon precast concrete tank, which is sufficient for a three-bedroom house, typically costs between \$600 and \$1,000. In a similar vein, the question “How can I calculate the size of my septic tank?” is raised.

The majority of home septic tanks are between 750 and 1,250 gallons in capacity.

What is the maximum capacity of a septic tank?

Name Capacity
750 Gallon Septic Tank – 1 Compartment / 2 Manholes 750 Gallons
750 Gallon One Compartment Plastic Septic Tank 750 Gallons
750 Gallon 1 Compartment Plastic Septic Tank (Loose Plumbing) 750 Gallons
750 Gallon 1 Compartment NexGen Septic Tank (Loose Plumbing) 750 Gallons

Septic Tanks

Listed below is a list of the septic tanks, chlorine contact tanks, and siphon dose tank packages thatCamden Supplyoffers, along with detailed descriptions of their features and specifications.

Please call Camden Supply and chat with one of our staff if you require further information on a certain product.

Single Compartment Septic Tanks

A one-compartment steel-reinforced concrete septic tank, according to the script. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

• Overall height is 56 inches
• Overall length is 79 inches
• Overall width is 48 inches
• Height to center line of inlet is 48 inches
• Height to center line of outflow is 45 inches
• Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.

600 Gallon Single Septic Tank

In total, the height is 56 inches, the width is 48 inches, and the length is 79 inches. The height to the center line of the inlet is 48 inches, the height to the center line of the exit is 45 inches.

• Overall height is 62 inches
• Overall length is 79 inches
• Overall width is 48 inches
• Height to center line of inlet is 52 inches
• Height to center line of outflow is 49 inches
• Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1000 Gallon Single Septic Tank

Septic tank with a single compartment made of steel reinforced concrete (SRC). Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

• Overall height is 60 inches
• Overall length is 96 inches
• Overall width is 67 inches
• Height to center line of inlet is 52 inches
• Height to center line of exit is 49 inches
• Weight is 8,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.

1250 Gallon Single Septic Tank

A one-compartment steel-reinforced concrete septic tank with the lower portion cast as a single piece so that there are no seams that come into touch with effluent. Specifications:

• Overall height is 60 inches
• Overall length is 117 inches
• Overall width is 68 inches
• Height to center line of inlet is 52 inches
• Height to center line of exit is 49 inches
• Weight is 10,400 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psiApplications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.

1500 Gallon Single Septic Tank

Specifications:

• Specifications:
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

25003500Gallon Single Septic Holding Tanks

Single Septic Holding Tank with a capacity of 2500 gallonsSpecifications:

• Overall height is 68 inches
• Overall length is 144 inches
• Overall width is 78 inches
• Height to center line of intake is 61 inches
• Height to center line of outflow is 61 inches
• Weight is 16,000 pounds.

Single Septic Holding Tank with 35 00 Gallon CapacitySpecifications:

• Overall height is 98 inches
• Overall length is 144 inches
• Overall width is 78 inches
• Height to center line of intake is 91 inches
• Height to center line of exit is 91 inches
• Weight is 20,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

Dual Compartment Septic Tanks

Description:Two-compartment tank with solids separator between the first and second compartments, holding 500 gallons and 500 gallons, respectively. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

• Overall height is 60 inches
• Overall length is 96 inches
• Overall width is 67 inches
• Height to center line of inlet is 52 inches
• Height to center line of exit is 49 inches
• Weight is 10,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.

1250 Gallon Dual Septic Tank

Description:Two-compartment tank with a solids separator between the first and second compartments, holding 625 gallons and 625 gallons. Specifications:

• Overall height is 60 inches
• Overall length is 117 inches
• Overall width is 67 inches
• Height to center line of inlet is 52 inches
• Height to center line of exit is 49 inches
• Weight is 10,700 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.

1500 Gallon Dual Septic Tank

Description:Two compartment system with a capacity of 1000 gallons in the first compartment and 500 gallons in the second compartment. The dosage pump portion is usually found in the second compartment. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

• Overall height is 60 inches
• Overall length is 150 inches
• Overall width is 67 inches
• Height to center line of inlet is 52 inches
• Height to center line of exit is 49 inches
• Weight is 11,700 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.

Triple Compartment Septic Tanks

Its overall height is 60 inches, its overall length is 150 inches, and its overall width is 67 inches; its height to the center line of the inlet is 52 inches, and its height to the center of the outlet is 49 inches; its weight is 11,700 pounds.

• Overall height is 60 inches
• Overall length is 150 inches
• Overall width is 67 inches
• Height to center line of inlet is 52 inches
• Height to center line of exit is 49 inches
• Weight is 12,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections. Available with pre-wired pump packages, complete with alarm, floats, and pump pad, with horse powers from 1/3 to 1.5, with up to 135 feet of total head capacity.

Chlorine Contact Tanks

Specifications:

• Overall height is 56 inches
• Overall length is 79 inches
• Overall width is 48 inches
• Height to center line of inlet is 48 inches
• Height to center line of outflow is 45 inches
• Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.500_gallon_chlorine_contact_or_grease_interceptor.pdfDownload File

Siphon Dose Tank Packages

Specifications:

• It measures 56 inches in height, 79 inches in length, 48 inches in width, 48 inches in height from center line of intake, 48 inches in height from center line of outlet, and 5,000 pounds in weight. It is equipped with an indoor alarm and alarm float.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1000 Gallon Siphon Tank Package

Specifications:

• It measures 60 inches in height, 102 inches in length, and 67 inches in width. It measures 52 inches in height from the center line of the inlet and 52 inches in height from the center line of the outlet. It weighs 10,000 pounds. It comes with an indoor alarm and an alarm float.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1250 Gallon Siphon Tank Package

Specifications:

• It measures 60 inches in height, 117 inches in length, and 68 inches in width. It measures 52 inches in height from the center line of the inlet and 52 inches in height from the center line of the outlet. It weighs 10,400 pounds. It comes with an indoor alarm and an alarm float.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1500 Gallon Siphon Tank Package

Specifications:

• Overall height is 60 inches
• Overall length is 150 inches
• Overall width is 67 inches
• Height to center line of intake is 52 inches
• Height to center line of exit is 52 inches
• Weight is 13,000 pounds
• Includes indoor alarm and alarm float
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1000 Gallon Plastic Septic Tank – 1 Compartment A-AST-1000-1

 Part Number: A-AST-1000-1 Capacity: 1000 Gallons Dimensions: 101″L x 60″W x 60″H Availability: In Stock Ships From: IA
*Stock subject to change. Please call to confirm.
 Description:Ace Roto-Mold septic tanks are stronger, easier to install, and less costly than old-fashioned concrete septic tanks- yet they still offer the quality construction and safety you expect. Manufactured from high-density polyethylene with U.V. inhibitors, Ace Roto-Mold tanks utilize a horizontal flow designed for below ground installations up to 36 inches. Ace Tanks are IAPMO approved and have passed strenuous stress tests. Each tank carries an individual serial code and is fully document from date of manufacture. Ace Roto-Mold septic tanks are designed and manufactured with rigorous quality controls. The trapezoidal deep-rib design and interior baffle system make Ace Tanks the industry choice. Only Ace tanks feature a custom-molded gasket in the lid. Manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties, eliminating the need for metal fasteners that can corrode and fail.
 SKU A-AST-1000-1 Part Number A-AST-1000-1 Mfr. Part Number AST-1000-1 Capacity (Gallons) 1000 Dimensions 101″L x 60″W x 60″H Weight (lbs) 441 Material Polyethylene Manufacturer Ace Roto-Mold / Den-Hartog Availability In Stock
Technical DrawingsGuides
Technical Drawings View Technical Drawing
 Shipping From IA Freight Class 300 Shipping Length 101 Shipping Width 60 Shipping Height 60 Shipping Weight (lbs) 441

1000 Regular

Regular septic tanks (model 1000) are the wastewater standard for the vast majority of residences. Featuring an integrated concrete input baffle as well as a Polylok PL-122 effluent filter with the industry’s first shut-off ball, this unit is a game changer.

Specifications:
• The design of the septic tank is monolithic
• The concrete is 4000 psi and set in 28 days
• The rebar is structural fiber grade-60. Precast concrete with air entrained in it: 6 percent (+-1 percent)
• Tank penetrations with rubber boots that are integrally cast
• Designed for non-traffic loading applications. Fill depths range from 0 to 36 inches
• Vacuum testing is offered for an extra fee.

The 1000 Regular septic tank is the wastewater standard for most residences, and it stores 1000 gallons of wastewater. Featuring an integrated concrete intake baffle as well as a Polylok PL-122/a>u00a0effluent filter with the industry’s first shut-off ball, this system is a must-have.

rn

Specifications:

rn

• Septic tank design with integrally cast tank penetrations and rubber boots. 4000 psi concrete at 28 days. Reinforced with structural fibersamp
• Grade-60 rebar. 6 percent (+-1 percent) air-entrained precast concrete. Vacuum testing is offered for an extra fee and may be done at any depth between 0 and 36 inches.rn The following are the attributes of the product:, description short:, available now:, available later:, id product27, out of stock:0, new:0, id product attribute:185, quantity wanted:1, extraContent:, allow oosp:true, category: septic-systems, category name: Septic Systems, link:, attribute price:0, price tax ex pricing parameters: 0
• Customizations: 0
• Rate: 0
• Tax name: 0
• Ecotax rate: 0
• Attributes comma lists: 0
• Attributes simple: 0
• Unit price: 0
• Customizations: 0
• Is customizable: false
• Show quantities: false
• Quantity label: Item
• Customer group discount:0
• Title, 1000
• Imagery on a regular basis:] The following are the defaults for the cart and the home page. The following are the defaults for the medium and the big page. The following are the defaults for the cart and the large page. id image: 52, position: 1, associatedVariants:, has discount:false, discount type:null, discount percentage:null, discount percentage absolute:null, price amount:0, regular price amount:0, regular price: \$0.00, discount to display: \$0.00, unit price full:, show availability:fals

Data sheet

Dimensions: 9 590 pounds; capacity: 1 000 gallon Exterior Dimensions64″ H x 5′-4″ W x 8′-0″ LInvert Out51 1/2″ Exterior Dimensions64″ H x 5′-4″ W x 8′-0″

Specific References

Overview Septic tanks made of precast concrete are safe and dependable containment vaults that are used to naturally treat and separate wastewater. Tanks from Oldcaslte Infrastructure are waterproof, appropriate for moderate and high traffic loading circumstances, and are also ecologically conscious. These tanks, which come in a variety of conventional and configurable configurations, are the best alternative where municipal sewers are not an option.

Grade ringsrisers, lifters, pulling irons, drainage sumps, and knockouts are all options for customizing your project to meet your specific demands and specifications. Features Benefits

• The following terms are used in this document: Modular Construction, Base/Bottom Section, Lids/Top Sections, Body Slab and Risers, Rings/Cover, Embedded Lifters, Grade Rings and Risers, Knock-outs/Block-outs, Divider Walls.
• Natural wastewater treatment and separation is made possible by the rugged durability of the system. Sectional design that may be customized
• Installation is quick and simple. Design featuring distinct access points, block-outs, and knock-outs on each of the five sides
• Base with four sides and an integral floor (body slab) as an alternative
• The design of the panel part is optional. Various shapes and sizes are available. Covering and protecting
• Accessibility for maintenance and inspection
• Various shapes and sizes are available. Access openings of several sizes and locations are available
• Customization to satisfy specific depth requirements
• Various shapes and sizes are available. Various sizes are available. Cast or ductile iron covers for concrete manhole frames or concrete coverings for concrete manhole frames
• Allow for simple installation
• Material made of galvanized steel
• 2, 4, 8, and 20-ton capacity loading capabilities. There are also one-ton universal lifters available. Covers for the access openings that are elevated above ground level
• Available in both rectangular and circular configurations
• Available in a variety of configurations to fit a wide range of inlet and output connection sizes and heights
• Custom round or rectangular forms are available based on your design parameters. In order to get the correct fit, knock-outs may be readily shattered with a hammer. The customer is responsible for installing baffles and pipework. Baffles made of precast concrete are installed in the base portion. Create a barrier to slow down effuient and keep solids in place.

Location Available

Middle Island, New YorkX114 Rocky Point RoadMiddle Island, New YorkX

4’x10′ Septic Tank 1000 Gal.

Overview Septic tanks made of precast concrete are safe and dependable containment vaults that are used to naturally treat and separate wastewater. Tanks manufactured by Oldcastle Infrastructure are waterproof, suited for moderate and high traffic loading circumstances, and are ecologically conscious. These tanks, which come in a variety of conventional and configurable configurations, are the best alternative where municipal sewers are not an option. Grade ringsrisers, lifters, pulling irons, drainage sumps, and knockouts are all options for customizing your project to meet your specific demands and specifications.

• The following terms are used in this document: Modular Construction, Base/Bottom Section, Lids/Top Sections, Body Slab and Risers, Rings/Cover, Embedded Lifters, Grade Rings and Risers, Knock-outs/Block-outs, Divider Walls.
• Natural wastewater treatment and separation is made possible by the rugged durability of the system. Sectional design that may be customized
• Installation is quick and simple. Design featuring distinct access points, block-outs, and knock-outs on each of the five sides
• Base with four sides and an integral floor (body slab) as an alternative
• The design of the panel part is optional. Various shapes and sizes are available. Covering and protecting
• Accessibility for maintenance and inspection
• Various shapes and sizes are available. Access openings of several sizes and locations are available
• Customization to satisfy specific depth requirements
• Various shapes and sizes are available. Various sizes are available. Cast or ductile iron covers for concrete manhole frames or concrete coverings for concrete manhole frames
• Allow for simple installation
• Material made of galvanized steel
• 2, 4, 8, and 20-ton capacity loading capabilities. There are also one-ton universal lifters available. Covers for the access openings that are elevated above ground level
• Available in both rectangular and circular configurations
• Available in a variety of configurations to fit a wide range of inlet and output connection sizes and heights
• Custom round or rectangular forms are available based on your design parameters. In order to get the correct fit, knock-outs may be readily shattered with a hammer. The customer is responsible for installing baffles and pipework. Baffles made of precast concrete are installed in the base portion. Create a barrier to slow down effuient and keep solids in place.

Location Available

Avon, Connecticut (151 Old Farms Road)

1000 Gallon Septic Tank – Single Compartment. 60”D x 51”H x 127”L

• Household wastewater treatment, on-site sewage treatment, residential applications, light commercial hotels, schools, and neighborhood applications, and more are available.

Notes

• All images and drawings are for illustrative purposes only and may not always depict the exact product being advertised. It is possible for dimensions on polyethylene tanks to differ by +/-3 percent (typical rotational molding tolerance). It is recommended that venting systems be sized to provide for a maximum pressure or vacuum of 1/2″ water column (0.018 PSI) in polyethylene water tanks when used for water storage exclusively at atmospheric pressure. The tank is composed of BPA-free and FDA-approved materials. The resin is produced in NSF-certified manufacturing facilities. The tank must be installed and used in accordance with the manufacturer’s instructions for usage and installation in order for the warranty to be valid. According to the tank manufacturer’s guidelines, flexible connectors must be used on all fitting connections.
• BPA-free and FDA-compliant
• High-quality and long-lasting construction
• 3-Year Manufacturer’s Warranty
• Currently in stock and available for purchase

\$1,590.00 in U.S. dollars Prices on all items displayed on our website are subject to change as a result of resin price changes that are beyond our control. Please contact our office to obtain verified price or to be placed on our waitlist for future availability (866-969-9404). Shipping and Handling Information

Ships From CA, NE, AR, WV, GA Call 866-959-7593 for Shipping Quote

Description

Septic tank with a single compartment made of HDPE. High-quality storage capacities are achieved via the use of state-of-the-art one-piece seamless construction. 1000 Gallon Single Compartment Schematic Illustration

Capacity 1000 127″ 60″ 51″ High Density Polyethylene (HDPE) 250 3″ Pre Drilled hole with Septic T and Gasket 3″ Pre Drilled hole with Septic T and Gasket (X2) 20″ NexGen D2 Lid and Gasket 1.0 (Septic use only) Snyder

Septic tanks for sale in the 1000 gallon capacity are available for purchase at the most competitive costs online.

Tank / Capacity Length Width Height Size Compartments Part From Price
1000 Gallon Septic Tank 101″ 60″ 60″ 101″ L 60″ W 60″ H 1 AST-1000-1 IA \$1,692
1000 Gallon Septic Tank 101″ 60″ 60″ 101″ L 60″ W 60″ H 2 AST-1000-2 IA \$1,852
1000 Gallon Septic Tank 101″ 52″ 71″ 101″ L 52″ W 71″ H 1 44622 MN, OH \$0
1000 Gallon Septic Tank 102″ 60″ 63″ 102″ L 60″ W 63″ H 1 41718 GA, MN, MS, NY, OH, OK, UT, WA \$1,922
1000 Gallon Septic Tank 102″ 60″ 63″ 102″ L 60″ W 63″ H 2 41720 GA, MN, MS, NY, OH, OK, UT, WA \$2,020
1000 Gallon Septic Tank 102″ 60″ 63″ 102″ L 60″ W 63″ H 2 41721 CA \$2,020
1000 Gallon Above Ground Septic Holding Tank 136″ 91″ 20″ 136″ L 91″ W 20″ H No 1000GB MS \$2,400
1000 Gallon Low Profile Septic TankShips Fast! ~ 48 Hour Lead Time 127″ 60″ 51″ 127″ L 60″ W 51″ H 1 42405 GA, MN, OH, OK, UT, WA \$1,679
1000 Gallon Low Profile Septic Tank 127″ 60″ 51″ 127″ L 60″ W 51″ H 2 43517 GA, MN, OH, OK, UT, WA \$1,794
1000 Gallon Low Profile Septic Tank – Intended For Use In IL 127″ 60″ 51″ 127″ L 60″ W 51″ H 1 43538 OH \$1,679
1000 Gallon Low Profile Septic Tank – Intended For Use In IL 127″ 60″ 51″ 127″ L 60″ W 51″ H 2 43541 OH \$1,794
1000 Gallon Low Profile Septic Tank – IAPMO Approved 127″ 60″ 51″ 127″ L 60″ W 51″ H 2 44482 CA \$1,903
1000 Gallon Low Profile Septic Tank – NC/SC Approved 127″ 60″ 51″ 127″ L 60″ W 51″ H 2 43510 GA \$1,794
1050 Gallon Low Profile Septic Tank – FL Approved 127″ 60″ 51″ 127″ L 60″ W 51″ H 2 43533 FL \$2,108

1000 Gallon Low Profile Septic Tank

Dimensions Liquid Access Inlet 1 Outlet / Drain 1 Preplumbed Septic State Approved Use Shipping Locations Shipping Zip Codes 127″ Length x 60″ Width x 51″ Height 1 Inlet, 1 Outlet, 2 Manway / Lid 4″ Gasketed PVC Tee Assembly 4″ Gasketed PVC Tee Assembly Pre-drilled with loose GasketTee Alabama, Arkansas, Arizona, Colorado, Connecticut, Delaware, Georgia, Iowa, Idaho, Illinois, Indiana, Kansas, Kentucky, Louisiana, Massachusetts, Maryland, Maine, Michigan, Minnesota, Missouri, Mississippi, Montana, North Carolina, North Dakota, Nebraska, New Hampshire, New Jersey, New Mexico, Nevada, New York, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Virginia, Vermont, Washington, Wisconsin, West Virginia, Wyoming Georgia, Minnesota, Ohio, Oklahoma, Utah, Washington 30224, 43130, 55375, 74801, 84074, 98671

What size is a 1000 gallon septic tank?

SteelSeptic TankTypicalDimensions
SteelSeptic Tank Size(GallonsCapacity) TankLength (Inches) TankDepth (Height) (Inches)
1000 58 96
1250 58 120
1500 58 144

ten thousand pounds It is also possible to inquire about the cost of a 1000 gallon septic tank. The average cost of a septic tank installation in the United States is \$6,021, with the majority of homes spending between \$3,102 and \$9,441. For a typical 1,000-gallon tank, which would be utilized for a 3-bedroom home, the cost of installation can range from \$2,100 to \$5,000, not adding the cost of the tank itself, which is between \$600 and \$1,000. How can I go about determining the size of my septic tank in this case?

The majority of home septic tanks are between 750 and 1,250 gallons in capacity.

I’m wondering how much a 1000-gallon concrete septic tank costs.

The majority of septic tanks are constructed of concrete, although they can also be constructed of steel, fiberglass, or polyethylene. A 1,000-gallon precast concrete tank, which is sufficient for a three-bedroom house, typically costs between \$600 and \$1,000.

What size of septic tank do I need?

Probably one of the last things on your mind when you are constructing a new house is the location of your septic system. After all, shopping for tanks isn’t nearly as entertaining as shopping for cabinetry, appliances, and floor coverings. Although you would never brag about it, your guests will be aware if you do not have the proper septic tank placed in your home or business.

septic tanks for new home construction

The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size. Of course, all of this is dependent on the number of people who live in the house as well as the amount of water and waste that will be disposed of through the plumbing system.

For the most accurate assessment of your septic tank needs, you should speak with an experienced and trustworthy sewer business representative.

Here are some helpful hints for deciding where to locate your drainfield when you’re designing it.

• Vehicles should not be allowed on or around the drainfield. Planting trees or anything else with deep roots along the bed of the drain field is not recommended. The roots jam the pipes on a regular basis. Downspouts and sump pumps should not be discharged into the septic system. Do not tamper with or change natural drainage features without first researching and evaluating the consequences of your actions on the drainage field. Do not construct extensions on top of the drain field or cover it with concrete, asphalt, or other materials. Create easy access to your septic tank cover by placing it near the entrance. Easy maintenance and inspection are made possible as a result. To aid with evaporation and erosion prevention, plant grass in the area.

a home addition may mean a new septic tank

Do not make any big additions or renovations to your house or company until you have had the size of your septic system assessed. If you want to build a house addition that is more than 10% of your total floor space, increases the number of rooms, or necessitates the installation of new plumbing, you will almost certainly need to expand your septic tank.

• For a home addition that will result in increased use of your septic system, your local health department will require a letter from you that has been signed and authorized by a representative of your local health department confirming that your new septic system is capable of accommodating the increase in wastewater. It is not recommended that you replace your septic system without the assistance of a certified and competent contractor.

how to maintain your new septic system

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. Septic systems are something we are familiar with from our 40 years of expertise, and we propose the following:

• Make use of the services of a qualified specialist to develop a maintenance strategy. Make an appointment for an annual examination of your septic system. Utilize the services of an effluent filter to limit the amount of particles that exit the tank, so extending the life of your septic system. Waste items should be disposed of properly, and energy-efficient appliances should be used. Make sure you get your septic system professionally cleaned every 2 to 3 years, or more frequently if necessary, by an experienced and qualified expert
• If you have any reason to believe that there is an issue with your system, contact a professional. It is far preferable to catch anything early than than pay the price later. Maintain a record of all septic system repairs, inspections, and other activities

common septic questions

Hire a qualified specialist to assist you in developing a maintenance strategy; and Maintain your septic system by scheduling an annual inspection. Utilize the services of an effluent filter to limit the amount of particles that leave the tank, so extending the life of your septic system. Use Energy-Efficient Appliances and properly dispose of waste products. Every 2 to 3 years, or as often as is necessary for your system, have your septic system cleaned by an experienced and qualified specialist.

Avoiding a problem in the first place is vastly preferable to paying a high price later.

How do I determine the size of my septic tank?

If you have a rectangular tank, multiply the inner height by the length to get the overall height of the tank. In order to find out how many gallons your septic tank contains, divide the number by.1337.1337

How many bedrooms does a 500-gallon septic tank support?

Calculate the internal height of a rectangular tank by multiplying it by its length. To find out how many gallons your septic tank can contain, multiply the figure by.1337.

How deep in the ground is a septic tank?

Your septic system is normally buried between four inches and four feet underground, depending on the climate.

SEPTIC TANKS

 SEPTIC TANKS-Specifications- Pricing 500 GALLON PUMP TANK LENGTH 68″, WIDTH 64″, HEIGHT 54″, WEIGHT 5500 LBS. INLET FLOW TO BOTTOM OF TANK 44� 0UTLET 41″. 1000 GALLON SEPTIC TANK LENGTH 102″, WIDTH 69″, HEIGHT 59″, WEIGHT 8600LBS. INLET FLOW LINE TO BOTTOM OF TANK 49″, OUTLET 46″. 1000 GALLON LOWBOY SEPTIC TANK LENGTH 154″, WIDTH’ 69″, HEIGHT 46″ WEIGHT 9900 LBS. INLET FLOW LINE TO BOTTOM OF TANK 36″, OUTLET 33″. 1 000 GALLON ROSIE 2 COMPARTMENT SEPTIC TANK LENGTH 154″, WIDTH 69″, HEIGHT 46″, WEIGHT 10,000 LBS. INLET FLOW LINE TO BOTTOM OF TANK 36″, OUTLET 33″.

A 500-gallon tank that measures 51 inches high by 62 inches wide by 60 inches long, and a 750-gallon tank that measures 51 inches high by 62 inches wide by 103 inches long. A 1000-gallon tank that measures 51 inches high by 118 inches long, and a 1500-gallon tank that measures 51 inches high by 177 inches long.