How To Unplug Kitchen Plumbing Line To Septic Tank?

Sprinkle the drain with baking soda, then dump vinegar into the pipe. Leave the mixture to sit in the pipe for an hour or two. Finally, flush the drain with hot water. If the clog is small, this could be enough to clear the pipe.

Is kitchen drain connected to septic tank?

All drains in the home converge to a single pipe that leads to the septic tank buried outside. When the waste water from your toilet, shower, sinks and washing machine leave your house, it’s combined. When it hits the septic tank, however, it begins to separate.

How do I know if my septic line is clogged?

Signs of Septic System Clogging: Water and sewage from toilets, drains and sinks backing up into your home. Bathtubs, showers, and sinks draining slowly. Gurgling sounds present in the plumbing system. Bad odors coming from the septic tank or drain field.

How do you dissolve sludge in a septic tank?

How to Reduce Sludge in a Septic Tank Without Pumping

  1. Install an aeration system with diffused air in your septic tank.
  2. Break up any compacted sludge.
  3. Add a bio-activator or microbe blend.
  4. Maintain the aeration system.
  5. Add additional Microbes as required.

How do I clean my septic tank naturally?

You can mix about a 1/4 cup of baking soda with 1/2 cup of vinegar and 2 tablespoons lemon to make your own natural cleaning agent. The baking soda will fizz up to help get the dirt and grime in your tub and drains. It’s a great cleaner and your septic system will thank you!

How do you clear a main line block?

Steps For How to Clear A Main Sewer Line Clog

  1. Loosen the Drain Pipe Cap (Cleanout Pipe) The first step is to find your main drain cleanout location.
  2. Remove Cap, Allow Build-Up to Drain. Once you remove the cleanout cap, step away quickly.
  3. Insert the Snake into Pipe.
  4. Run the Tool Until Clog Is Gone.
  5. Clean Up.

How do you unclog a main sewer line?

How to clear a main sewer line clog

  1. Step 1: Loosen the cap on the drain pipe. Loosen the cap on the drain pipe.
  2. Step 3: Feed the auger cable into the drain pipe.
  3. Step 4: Run the auger until the clog is clear—and beyond.
  4. Step 5: Hose down the pipe and auger cable.
  5. Step 6: Slowly pull the auger back out of the pipe.

How do you unclog a leach line?

Can Anything Unclog an Old Septic Drain Field?

  1. Shock the System With Bacteria. A septic system bacteria packet can help clean out a clogged drain field by allowing waste material to break down and drain through.
  2. Reduce Water Usage.
  3. Avoid Harsh Chemicals.
  4. Change to Gentler Toilet Paper and Soap.
  5. Contact a Septic Professional.

What breaks down sewage in a septic tank?

The septic tank has microbes, especially bacteria, which break down and liquefy the organic waste. In phase one, the wastewater is introduced into the septic system where solids settle down to form the sludge and scum layers as the anaerobic bacteria digest the organic waste.

What eats sludge in septic tank?

One example of a homemade remedy is to flush ¼-½ a cup of instant yeast down your toilet. The yeast eats away at the sludge and helps loosen it, breaking it down so that wastewater can get through.

Can you pour peroxide in septic system?

You May Interfere with the Drainfield The hydrogen peroxide found in some additives may be harmful to the soil in the drainfield. This can cause the drainfield to be less effective at purification. The hydrogen peroxide may also harm the bacteria found in the septic system.

How do I start a new bacteria in my septic tank?

Flush a packet of brewer’s dry yeast down one toilet on the bottom floor of your house once a month. The yeast will help add “good” bacteria to your septic tank and break down waste.

How do I increase bacteria in my septic tank?

What Can You Do to Promote Septic Tank Bacteria Growth? Bacteria will grow naturally in your septic tank. You promote growth of bacteria by flushing more solid waste down into the tank all the time.

How to Unclog a Drain and Septic Tank : Tips and Tricks

  • Plumbing
  • Unclogging
  • Septic Tank
  • Blocked
  • Septic System
  • Pipes and Drains
  • How to Plumbing

A few methods for unclogging a septic tank drain, as well as suggestions for speeding up a slow drain, difficulties that may arise while unclogging a drain, and preventative steps to avoid blocked septic tanks and drains will be discussed in this article. As well as how to unclog a septic tank and tricks to solve common septic problems that may arise as a result of a full septic tank or clogged septic lines, this article will teach you how to unclog a septic tank. Your kitchen sink drain or bathtub drain is attached to a specific branch line and drains at a slower rate than usual because of this.

Reasons for a clogged bath or kitchen drain:

  • Dumping food or solid stuff down the drains is prohibited. Putting oil or other sticky substances into the kitchen sink
  • Dumping chemicals or paints down the drains is not acceptable. Hair down the drains of the bathtub and shower
  • Ventilation that is improper and/or insufficient Drainage system that is clogged Septic intake or outlet that is clogged

Common Causes of Clogged Drains

Many various things may cause your kitchen sink drain or bathroom drains to get clogged, but the most typical reasons of clogged drains are still leftover food and grease from the kitchen that is poured down the kitchen sink, as well as hair that is flushed down the bathtub and shower drain. Another typical reason of clogged drains is the buildup of paints and other chemicals inside the drain pipe, which solidify and block the line. In many cases, you will be able to unclog a blocked kitchen sink or a clogged bathtub drain on your own.

Ways to unclog a drain:

  • Baking soda and vinegar drain unclogging is an alternate and more natural method of unclogging a clog in the drain. Vinegar and baking soda have no negative impact on the environment. A plunger can be used to clear a clogged drain. This method will work for clogs of modest size and will not cost you much money. If the obstruction continues, consult with a professional. Although it is more expensive, unclogging a drain with a cable or auger may be quite successful in removing solid obstructions in the drain and even breaking through thick roots
  • Yet, it is also more efficient. Pouring paint or other sticky and oily materials down the drain can produce blockages, and high-pressure water jetting is more successful at clearing them.

Before you begin utilizing high-pressure water jetting to unclog your drain, be sure that your pipes are capable of withstanding the high pressure that will be applied by the high-pressure jet. Otherwise, the high pressure will rip your pipes apart. Hydro jetting is best left to the professionals, such as your local plumbers.

Ways to avoid clogged drains and a full septic tank:

  • Avoid blocking your sink drain by pouring solid objects or oily stuff down it. Cover the drains in your toilet and kitchen with filters to protect hair and solid things from entering the drain system. Make certain that suitable numbers of air vents are provided, and that the diameters of the vents are acceptable for all of your fixtures.

Problem II: All of your home’s drainage lines are sluggish to drain, and the drain water from the main drainage line is backed up in a pool.

Possible causes for a slow drain:

  • An obstruction has formed in a section of the main drain line
  • An obstruction has formed at the drain intake or outflow of the septic tank. A section of the percolation pipes has become jammed
  • The septic tank vent has become obstructed. Low temperatures have caused the sewage tank or septic vents to become iced over
  • One of the distribution boxes has been blocked off

Ways to unclog a main drain or full septic tank:

  • To unclog the main drain line, use a snake or high-pressure water jetting. This is the work of a professional. By virtue of his knowledge and experience, he can snake a sluggish drain, determine if the blockage is caused by solid waste, oily substances, or roots, and apply the most appropriate procedure to unclog the drain. Verify that there is no blockage at the entrance or exit of the septic tank owing to solid wastes or scum, among other things. Check the distribution box, which is placed between the septic tank and the percolators, for easy flow once the block has been removed. If there are any obstacles, they should be removed. Check the region around the percolators for any problems. Check to see whether the area is damp, marshy, or smelly. It indicates that the percolation process is not working properly. Another type of work is where the earth is not absorbing the drain water at the same pace as it is being discharged. It might be because your water use has increased recently as a result of the increased number of guests, or it could be because the soil has been saturated as a result of moisture from other sources such as rainfall (which has been above average), or both. If your septic tank has frozen due to inclement weather, call an expert right away
  • If your septic tank has frozen due to inclement weather, call an expert right away. Use the septic tank as a storage tank until the tank has completely thawed on its own if you can’t find a professional or the tools you need to do the job. You will be able to hang on for a longer period of time if you make wise use of water. Winterizing the septic tank before the following winter will help to prevent it from freezing in the future.

Preventive measures to avoid a blocked main or slow drain:

  • Please be considerate of your septic tank. It is intended solely for the disposal of organic waste materials. Avoid depositing non-biodegradable and inorganic garbage in landfills. They will very certainly overflow a septic tank and interfere with the regular operation of the septic tank. Use drain filters in your toilet and kitchen to catch hair and solid things that are flowing down the drain. In order to avoid the septic tank from freezing in the winter, it should be winterized. If you are considering a lengthy trip, you should empty your septic tank and seek professional assistance. Winterization is dependent on the area and weather conditions. A simple investment here will spare you from all of the difficulties you may face throughout the winter.

External References

  • Natural ways to unclog a drain include the use of vinegar, baking soda, and water (, among others. On, you can learn how to unclog a sink naturally.

Related articles:

A clog in your plumbing usually affects only a single sink, tub, shower, or toilet; however, if more than one fixture is clogged, you may need to clean out the main drain line to resolve the problem. Please keep in mind that product pricing, availability, and item numbers may differ from market to market.

How to Unclog a Drain

A plumbing auger, often known as a plumbing snake, and a sewer rod are both efficient tools for clearing obstructions from the main drain line in specific situations. CautionIf you believe that there is a blockage in your main drain line, you should refrain from using the plumbing system in your house until the problem is resolved. Increasing the amount of water entering the pipe may result in wastewater backups in the residence.

Tips to Prevent Drain Problems

  • Don’t use the sink to dispose of coffee grounds, grease, or other anything that might clump or harden. When utilizing a garbage disposal, be sure to pump lots of cold water through it to flush food particles down the drain. Trainers and pop-up stoppers should be cleaned on a regular basis. Heavy paper goods should not be flushed into the toilet. Consider applying a drain maintenance treatment that is designed to decrease the accumulation of debris in pipes. Check to see whether it is compatible with your system. If you have a septic tank, get it inspected by a professional every two to three years, or as often as is necessary in your region.

How to Unclog Your Septic Tank

Documentation Download Documentation Download Documentation In the event that you have slow drains, pooling water in your yard, or foul aromas near your septic system, it is possible that one of the pipes has become clogged. Fortunately, there are several methods for removing blockages from your sewage system that do not require the services of a septic service specialist. To begin, search for any apparent obstructions inside your septic tank and try if you can drive them out with a little force.

If you need to get to a clog that is further inside a pipe, you might want to consider utilizing a mechanical auger to cut through it. Following the removal of the blockage, be sure to properly maintain the septic system in order to keep it clean!

  1. 1 Check the inflow pipe by lifting the access cover of the tank that is nearest to your residence. The plastic or concrete cover in your yard that is closest to your house should be the first place you look. Carefully raise the cover of the tank up and away from the tank so that you can see what’s within. If you notice a white or green pipe at the end of the tank closest to your home, look for anything that could be blocking the pipe’s outlet. If there is, it is possible that the blockage is the source of the problem.
  • Assuming the water level is below the level of the entrance pipe, the blockage might be located in the drain pipe that runs between the septic tank and your residence. If the water level is higher than the inlet but there is nothing blocking the end of the pipe, the clog is most likely in the leach field
  • However, this is not always the case. It may be necessary to dig up the access lid with a shovel or raise it with a pry bar in order to get access.
  • Advice: If you are unable to locate the access lid for your septic system, consult with your home’s as-built plans, which are blueprints prepared after your home is constructed, or with a professional septic service. 2 If the scum is trapped at the end of the input pipe, use a pole or a stick to push it out of the way. The scum layer is composed of solid waste that accumulates on the surface of the septic tank. Make use of a long, strong piece of wood or metal to slide the scum down or to the side of the entrance pipe as needed. Continue to remove as much scum as you can from the area around the pipe so that it can continue to fill your tank.
  • If you are working in your septic tank, you should always wear gloves to prevent bacteria and waste from getting on your hands. If water starts to flow out of the pipe after you’ve pushed the scum out of the way, you’ve successfully eliminated the clog.
  • Advertisement
  • s3 If the blockage is deeper inside the pipe, use the pole or stick to probe the end of the pipe. Insert the end of the stick or pole you’re using as far as it will go into the end of the pipe you’re working with. Make use of the end of your probe to scrape the edges of the pipe and draw any waste from the pipe into the tank. Even if the clog is at the very end of the pipe, you should be able to dislodge it and get the water flowing once again. It is likely that the clog is located deeper inside the pipe if water does not flow out of it.
  • Depending on where the pipe is located, you may or may not be able to insert your probe into the pipe.
  • 4 Disinfect any instruments you used by mixing a 5:1 solution of water and bleach together. Stir up 1 part chlorine bleach and 5 parts clean water in a big bucket until the chlorine bleach is completely dissolved. Immerse your tools in the solution and allow them to soak for around 5 minutes to destroy any germs that may have remained on the surface. When you’re finished, drain the liquid back into your septic tank.
  • If at all possible, take a shower or bath as soon as possible after working on your septic tank
  • When you wash your garments, use bleach or laundry sanitizer to ensure that no bacteria is left on them after washing.
  • 5 If you were able to resolve the issue, replace the access lid on the septic tank. Lift the lid and place it over the opening that leads into the septic tank to prevent it from closing. Slowly lower the lid down until it completely covers the hole and does not move around any more. Continue to leave the lid open in order to insert a mechanical auger if you haven’t removed the blockage.
  • Never leave the septic tank door open while you aren’t working on it to prevent anything from falling into the tank.
  • 6 Make use of a reputable service. If your tank was completely filled, you should pump it within 5 days. It is conceivable that your tank will back up again even after you have removed the clog. This is especially true if your main tank is completely full to the entrance line. Inform septic service personnel that the scum level has reached the pipe by contacting them through telephone or email. It is best to schedule them within the following 5 days, otherwise you will increase the likelihood of septic fluid returning up the drainpipes. The service will empty your septic tank, ensuring that scum does not re-enter your plumbing system.
  • Having a septic tank pumped typically costs between $75 and $200 USD, depending on the size of the tank and the amount of waste that has to be removed. Every 3–5 years, or whenever the tank becomes full, have your septic tank cleaned and emptied.
  1. In order to get to the inflow line, you must first remove the septic tank access lid that is closest to your residence. Because the intake pipe is more likely to be located on the access lid nearest to your home, if your septic tank has multiple access lids, select the one that is closest to your home. Using your hands, lift or pull the tank’s cover off and set it aside while you continue to work. Inside your tank, look for the end of a white or green pipe that protrudes from the side that is closest to your house.
  • If you are unsure about the location of your tank’s access lids, consult your home’s as-built plans or consult a professional service.
  • 2 Insert the cutting blade of a mechanical auger into the jammed pipe’s end with the auger’s handle. A mechanical auger is comprised of a long metal cable that is inserted into your pipes and equipped with a revolving bit that cuts through the obstruction. Begin at the end of the blocked pipe or at an access point for the pipe, such as a cleanout port, to unclog the blockage. Placing the cutting blade of the auger inside the obstructed pipe and pushing the line in around 1–2 feet (30–61 cm) can clear the blockage.
  • It is possible to purchase a mechanical auger either online or from a local hardware shop. Investigate whether your local hardware shop provides equipment rentals to see if you can borrow an auger for the day without having to pay the whole price
  • A mechanical auger may be purchased either online or from a local hardware shop. Investigate whether your local hardware shop provides equipment rentals to see if you can borrow an auger for the day without having to pay the whole price
  • And
  • It’s possible that you’ll require an extension cord to connect the mechanical auger. You should never use the auger without wearing gloves or wearing safety eyewear since you might suffer a serious injury. Because the auger would spin violently if you start it with the cutting end outside of the pipe, you should never do so.
  • 4) Continue to feed the auger deeper into the pipe until the obstruction is broken apart. Holding the auger’s line with both hands, guide it into the pipe until you encounter resistance if necessary. Try rotating the line in your hands to see how far it will travel within the pipe if the resistance feels substantial. It is possible that it has encountered a curve in the pipe. To drive the obstruction apart if this is not possible, use short, back and forth strokes to push and pull the auger. Continue to force the auger into the blocked piece of pipe until it is able to pass smoothly through it
  • If you successfully clear the clog, water will begin to flow through the pipe again while you are still inside it with the auger. Mechanical augers are available in a variety of lengths, so if the one you’re currently using isn’t long enough to reach the blockage, consider renting the next largest size.
  • Keep at least one hand on the auger’s line while it is operating to ensure that it does not spin or rotate while you are trying to feed it. Before removing the auger from the pipe, be sure it is turned off. Make sure that the auger’s power switch is in the Off or Reverse position so that you can easily remove it from the ground. With both hands, gently guide the auger’s line back into the container, then slowly bring it back through the pipe to the other end. Using a hose or paper towel, carefully remove the auger end out of the pipe and clear off any dirt or trash that has become lodged on the end.
  • It is not advisable to remove the auger from the pipe while it is still operating since it might cause injury. Remember not to touch the auger’s line with your bare hands because it has just passed through a pipe that contains garbage and potentially deadly bacteria.
  • 6 The tools should be cleaned with a solution made up of 5 parts water and 1 part bleach. Stir the solution together by pouring 1 part chlorine bleach and 5 parts clean water into a bucket and mixing thoroughly. Clean the end of the auger with a cleaning rag to kill any bacteria that may have remained on the surface and avoid contaminating other parts of the machine. You should drain the solution into your septic tank once you’re finished
  • Don’t flush the cleaning solution down the toilet since it contains bacteria from your septic tank that are dangerous.
  1. 7Remove the septic tank’s cover and replace it. Lift the lid off the ground by grabbing it by the handles or the sides of the container. Lift and carefully drop the lid back onto the opening going into your sewage treatment system until it is completely enclosed. Make sure the lid does not slip or shift in any way, or otherwise it may break loose and fall off the septic tank. Advertisement
  1. 1 Other than water and natural garbage, avoid dumping anything else down your drains. Water, human waste, and toilet paper are the only things that septic tanks are designed to handle
  2. Thus, any additional products can cause the entire system to get clogged. To avoid clogging pipes, place paper towels, wet wipes, food scraps, and other solid waste in the ordinary garbage instead of in the recycling container. Make it clear to other people in your home what they can and cannot flush down the toilet to avoid clogging the drains and pipes.
  • Using strong chemical cleansers down your drain is not recommended due to the possibility that they can destroy the natural bacteria in your septic tank that is responsible for decomposition of solid waste. You should never pour cooking oil down the drain because it might harden in the pipes and cause blockages that are difficult to clear.
  • As a reminder, you do not need to add any additional natural enzymes or bacteria to your septic tank in order for it to properly break down solid waste. Any additional enzymes will be ineffective in comparison to the enzymes that naturally present in the tank
  • 2 Reduce the amount of water you use in your home so that the septic system can drain correctly. Avoid running water in your home until absolutely necessary, since doing so may cause the tank to fill up too rapidly and overflow. Use as little water as possible when bathing or cleaning, so that you only have as much as is necessary at any given time. In the event that you have any outdated or leaking fixtures, you should repair them or replace them with more energy-efficient systems, such as toilets that flush less water or faucets with aerators.
  • It will also save you money on your utility bills if you keep your water consumption to a minimum.
  • 3 Avoid driving or planting over the area where your septic tank is located. Heavy weight can cause pipes leading from your septic tank to collapse or break, so if at all possible, avoid driving over the area in a vehicle as much as possible. Plant roots can also grow into the pipes or septic tank, causing them to clog more quickly than they otherwise would. Maintain a distance of at least 20–30 feet (6.1–9.1 m) between your septic system and any trees or plants you intend to plant so that the roots are not able to grow within.
  • Even if you use a mechanical auger to remove the roots out of your pipes, the roots will come back if the problem is not addressed. Root barriers purchased from gardening supply stores destroy roots on touch and can help to prevent overgrowth in your septic system. To protect your septic system from pipes, dig a trench around it that is 2 feet (61 cm) deep and 3 feet (91 cm) away from them. Make sure that you place the root barrier in the trench vertically before you fill the trench back up with earth.
  • 4 Improve drainage by cleaning the effluent filter located on the outflow pipe. The effluent filter is a plastic cylinder that is installed in the exit line of your septic tank to prevent solid waste from escaping. Make sure the tank closest to your home has an access cover that can be opened. Look for a vertical white or green pipe that holds the filter and protrudes through the top layer of scum on the interior of the filter. Remove the filter from the vertical pipe by pulling it straight out and rinsing the waste back into the tank using a hose. Push the filter back into the pipe so that it may continue to prevent waste from escaping
  • Not every septic system will be equipped with an effluent filter
  • However, most will. Check your filter every time you have your tank pumped or examined to ensure that it does not become clogged.
  1. 5. Have a professional inspection of your septic tank performed once every three years. Septic tanks typically take 3–5 years to fill, however this might vary based on the size of the tank and the quantity of water it receives. Consult with a professional provider to have the water levels and pipes for your system checked to determine if any adjustments are necessary. If the provider has any issues, you should solve them as quickly as possible to avoid having a malfunctioning septic system later on. Advertisement
See also:  What Is The Best Yeast To Use In A Septic Tank? (Correct answer)

Create a new question

  • Question What is the location of your septic tank? David Balkan is a writer who lives in New York City. A professional plumber and the CEO of Balkan Sewer and Water Main David Balkan is a licensed professional plumber who also serves as the CEO of Balkan Sewer and Water Main Service and the President of Balkan Sewer and Drain Cleaning, among other positions. With over 40 years of experience as an active owner of these businesses, David is well-versed in the challenges that arise with water service lines, sewers, and drain lines. David has served on the Executive Committee of the Sub Surface Plumbers Association of New York for more than 30 years and is now the Chairman of the Master Plumbers Council’s Committee on Plumbing. As a result of his expertise and solution-oriented approach, Balkan Sewer and Water Main Service has grown to become the biggest and most trusted sewer and water main service in New York City, and the recipient of the 2017 Angie’s List Super Service Award. Answer from a Professional PlumberCEO of Balkan SewerWater MainExpert Because they have to be pumped out on a regular basis, they usually have clean outs that are visible to the public. The quickest and most straightforward method is to discover your major house trap or clean out. Typically, the first tank would be 15 feet or somewhat more away from the outer wall of your home because it is frequently the very minimum distance that is needed by building codes. Once you’ve identified your primary cleaner or trap, you may utilize the instruments that experts employ. Their electronic pipe tracing equipment may be inserted into your main sewer line, allowing them to find and locate where the tanks are located. Question Is it harmful to my septic tank to use too much Rid X at one time? Using excessive amounts of Rid X will have no negative consequences. Question Is it possible that heavy rains or storms might cause difficulties for my septic system? Daniel and Robin KirbyAnswer from the Community Identifying a concave indention over your field lines or over your septic tank is important if you’re experiencing troubles every time it pours rain. Because of this, water can accumulate directly on top of your field lines, resulting in an overflowing sewer system. To correct it, just fill up the sunken sections with concrete. A short hill in the middle, sloping down to normal grade on both sides of the field line for approximately two feet, may correct this
  • Nevertheless, Question Is there a natural enzyme, such as dry yeast, that may be utilized instead of paying for expensive enzyme treatments or having a septic system that has only been used by one person pumped out? The man that came to service our septic system had a lot of expertise. He informed me that we could save money by simply adding a package of standard yeast to the mix once or twice a month, rather of buying special yeast. I buy the store brand (which costs 79 cents a packet) and flush a couple of packets every month down the bathroom sink. That is all there is to it. Question What is the best product to use in the toilet to protect my septic system from damage? Daniel as well as Robin Kirby Community Answer Although there is enough of food for your bacteria in a septic tank, it dies due to a lack of oxygen, therefore if you add additional bacteria, they will die practically as soon as they are flushed out with the wastewater. A treatment plant, where oxygen is fed into the tank, may increase the number of bacteria from the millions that exist in a septic tank to billions when both aerobic and anaerobic bacteria can grow! Having said that, treatment plants should be drained out more frequently than septic tanks, according to industry standards. Question In the case of a septic system, what can I use to unclog a clogged sink drain? For myself, I prefer to use a plastic drain snake. It is a plastic ribbon with small barbs that grab whatever is clogging your drain and pulls it out of the way (usually hair). While they are inexpensive and quite effective, they are also a bit dirty
  • Question When my septic tank becomes clogged with oil and hair bleaching chemicals, what should I do to clear it out? No oil or grease should be flushed down the toilet or into the septic system. Put it in a grease can and toss it out of the window. As far as bleach is concerned, it destroys the microorganisms that your septic system requires in order to function properly. You might wish to look into septic-safe items
  • They are available.
See also:  How To N Out Septic Tank? (Solution found)

Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement

  • Unless you are skilled in septic tank unclogging or there is significant damage to the pipes, you should hire a septic specialist to conduct the necessary repairs for you to guarantee that everything is in compliance with the law. When working on your septic tank, always wear protective eyewear and disposable gloves to prevent contamination.


Things You’ll Need

  • Hose
  • Paper towel
  • Mechanical auger
  • Safety glasses
  • Work gloves

About This Article

The writers of this page have together authored a page that has been read 314,893 times.

Did this article help you?

If you have ever had to deal with a clogged drain, you are aware that the cleanup procedure is anything but enjoyable. Sewage line blockages are often caused by an obstruction in the pipes or when the septic pipe levels out and prevents gravity from conducting its work.

Symptoms of a Clogged Drain

In virtually all cases, when you have a clogged drain or pipe, you will feel at least one of two symptoms. An foul odor emanating from the sink, toilet, drain, or other plumbing fixture almost always indicates the presence of something as unpleasant impeding the course through the pipes. In sinks, it is almost always food that is the source of congestion. In toilets, it’s possible that someone flushed something they shouldn’t have, or that they truly emptied and should have used a mid-session flush instead of the first flush.

2. Water Going the Wrong Way

Water is supposed to wash down the drain and not come back up, so it makes sense that it would. Some obstruction is causing your sink or shower to take an excessive amount of time to train. Even though a blocked line is typically caused by anything that has been flushed down the toilet, the source of the problem may be located deep inside the heart (and pipes) of the septic system itself. It is possible that tree roots are causing your septic system to back up. Obviously, if this is the case, you’ll want to consult with a professional right away.

It is possible for your pipes to freeze during the winter months if they are not buried at the right depth.

Tips for Clearing a Clogged Drain

Before you call a septic company, there are a few things you may do to try to unclog your drain on your own that may be successful.

1. Avoid cleaners with chemicals

Chemical-laden cleaners have a tendency to degrade the enzymes in your septic system, which are designed to aid in the degradation of waste. Instead, use a drain cleaner that is safe for septic systems and does not contain any harsh chemicals. A professional cleaner should always be kept on call in the event of an emergency.

2. Pour hot water down the drain.

The surge of hot water, particularly in kitchen sinks, is typically sufficient to dislodge or dissolve any clog in the pipes. Check to see whether boiling water might be of assistance before seeking expert assistance.

3. Use baking soda and vinegar.

If water alone is ineffective in dissolving the obstruction, a baking soda and vinegar reaction may be used to achieve success. Pour a couple spoonfuls of baking soda down the drain, followed by a cup of vinegar, then flush the toilet. The fizzy explosion aids in the breakdown of waste and the restoration of normal flow. The fact that you are unable to unblock the blocked drain by yourself might indicate that the problem has reached a deeper level. An impediment other than food might be blocking one or more septic system pipes, which could be collapsing.

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area.

Septic systems are something we are very familiar with, and we can handle just about any septic problem, including a clogged drain or septic line, thanks to our 40 years of experience. If you have any reason to believe that there is an issue with your system, please contact us.

who should you call for septic issues?

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. If you believe that your septic system is having troubles, or if you require septic replacement components such as septic filters, please contact us right once.

Our affiliate links to these products generate a small commission for us if you decide to purchase them through our links.

How Do You Unclog a Drain if You Have a Septic System?

A blockage in your drain may cause water to not drain as efficiently as it should. Most of the time, when this happens, you buy a bottle of chemical drain cleaner and pour some of it down the drain. The chemicals work their way through the clog, enabling water to flow freely through the drain once more. Chemical drain cleaners, on the other hand, should not be used if you have a septic system. In addition to killing beneficial enzymes and bacteria in your tank that aid in waste breakdown, chemical drain cleaners can also be harmful to the tank itself, causing it to rupture.

  1. The simplest method of trying to unclog a clogged drain is to simply pour hot water down the drain until the clog is removed.
  2. The hot water will help to loosen any grease or soap that is causing the clog, and the rush of water will help to loosen any hair clogs that have formed in the drain.
  3. If hot water does not work, the next method you can try is a mixture of baking soda and vinegar, which should be effective.
  4. This will induce a fizzing activity, which may result in a fizz-like explosion as a result.
  5. In certain cases, the fizzing motion might assist to break up the blockage and get things moving in your drain once more.
  6. In contrast to conventional drain cleaner, septic-safe drain cleaner does not include the potentially dangerous compounds found in regular drain cleaner.

Make certain, however, that the item you are using does mention that it is safe for septic systems. A septic-safe drain cleaning product should always be kept on hand in the event that your home is equipped with one. If all other procedures fail, you can use this approach to unclog your drains.

Clogged Sewer Line: How To Unclog Main Sewer Line Quickly

Do you want to know how to unclog clogged sewage lines? Having a sewer line is extremely important because it contributes to maintaining a clean urban environment by transporting wastewater to the nearest treatment facility. When the main sewage line becomes blocked, the drains will slow down or totally cease working. Depending on the degree of the obstruction, homeowners may be required to pay as much as $200. Broken pipes and debris can build up in the sewer system, causing it to clog and get backed up.

8 Signs of a Sewer Line Clog

It is necessary to consult with an expert when dealing with sewage or other hazardous waste. If a foul stench emanates from the sink, toilet, tub, or shower, it is possible that your sewage line is obstructed. The bad odor is caused by sewage that is unable to drain properly as a consequence of obstructions. The fact that domestic drains are connected to either the septic tank or the municipal sewage system means that blockages might cause them to cease to function. When the drains aren’t working correctly or the toilet isn’t flushing properly, the water levels in the toilet vary.

When a drain pipe bursts, the expense of repairing it can quickly spiral out of control.

Preparing for the possibility of spending more than $150 per hour for excavation and repairs if tree roots have obstructed the sewage system or if concrete slabs need to be removed

  • The usage of a plunger or a chemical drain cleaner on a regular basis may indicate that you have a clog in your main sewage line. It is important not to ignore this problem, especially if you are forced to use a plunger or chemical drain cleaner every time you flush the toilet or use the sink. Drains that are too slow – When you notice that several of your drains are slowing down at the same time, this is a clear indication of a sewer blockage. If you suspect a blockage in your drain, inspect all of your low-lying fixtures. The toilet, the bathtub, and the bathroom are examples of such facilities. If you see that the majority of them are draining slowly or not at all, you have a problem. Odors – When your main sewage drain and lines get clogged, wastewater is forced back into your sinks, toilets, and bathtubs, causing unpleasant odors. Despite the fact that you may not be able to see the water immediately after the blockage begins, you will detect a foul odor. That is a symptom that unclean water is creeping back into the drain pipes or that the drains are not draining properly. A clog in more than one fixture — Flushing the toilet only to have water fill your bathtub, or running your washing machine and having water fill your toilet, indicates that you have a blockage somewhere else in your plumbing system. Noises that are out of the ordinary – Does your toilet create a gurgling sound with each flush? Is it normal to hear creaking and other strange sounds coming from the walls or through the floors when you run the water in the sink or after you turn off the shower? If this is the case, you may have a blockage in one of your sewer lines. Rising and Falling Water Level in the Toilet – If the water level in your toilet rises and falls without any apparent cause, you may have an issue with your main sewage drain pipes. Whether you empty your bathtub or kitchen sink, check to see if it has any effect on the water level. Having your sewer lines examined if this is the case is essential. Cleaning Out The Cleanout –Thecleanoutis the upright pipe that plumbers use to unclog backed-up sewage pipes. An obstruction in your sewage drain is indicated by the presence of water coming out of it. Besides the fact that it is unhygienic, the water may cause your yard to smell really terrible. Concerns about the outside – When inspecting the outside of your home, look for water puddles (particularly if it hasn’t rain in a long time), foul aromas, yellow and brown spots on your grass, and exposed tree roots that appear suspiciously near the foundation of your home. These problems are often caused by a blockage in the main sewage system.

There are a multitude of factors that contribute to sewage line blockage. To avoid making the situation worse, it is always advisable to consult with a professional plumbing contractor about the issue. Upon inspection, he or she can clean the system and explain to you what caused the clog. Here are some of the probable reasons of a clogged sewage line.

  • The sewer line will not drain properly if a large portion of the sewer pipe has been broken or damaged in some way. When there is an increase in traffic above ground or when heavy construction equipment is used, sewer pipes are more likely to rupture. Please keep in mind that when metal pipes crack as a result of corrosion, they do not drain correctly. Soil changes might cause your sewage line to sag, which is a serious health hazard. When this occurs, the piece of the pipe that has sunk begins to gather paper and garbage, causing a blockage. if you have an older main sewer drain and lines that are composed of porous materials such as clay, plants and bushes roots will cling onto them and infiltrate the system. As they grow and their roots become more extensive, they have the potential to break the sewer pipe and cause a clog. Disposing of Debris Down the Toilet – There are a number of items that you should not dispose of down the toilet. It is possible for your sewage line to become clogged if you flush items like face tissues, eggshells, coffee grinds, toilet cleaning pads, and tampons down the toilet.

Ways to Prevent Future Sewer Line Clogs

Maintaining your cleansewer lines can help you avoid future obstructions. Do not flush feminine hygiene products, facial cleansing cloths, thick paper towels or toilet paper, or any other objects that are not designed for flushing down the toilet down the toilet. In order to avoid tree roots from harming sewage lines, older trees that are located close to your house or septic system should be considered for removal. It is also possible for tree roots to produce main sewage line blockages by penetrating sewer lines and obstructing the flow of water to the septic tank.

  • Regularly clean your sewer pipes with an enzyme cleaner to avoid them becoming clogged. Enzyme cleaners are available at most hardware stores. These contain no harmful chemicals and are completely safe for you and your family to use. Remember to get your sewer lines examined by a professional plumber on a regular basis after taking these precautions. Keep Plants Away from Sewage Lines– Plant roots can clog your sewer line, so avoid planting trees, flowers, or bushes near them to avoid this problem. Because of the difficulty of maintaining these plants, and the potential for pipe damage, Use the wastebasket instead of the toilet – The only things that should be flushed down the toilet are human trash and water. Sterilization items, such as sanitary pads and tampons, can cause significant blockage of sewage lines. Replace Lead or Clay Sewage Pipes — If you reside in an older home with lead or clay sewer pipes, you should consider having them replaced immediately. It will prevent you against a clog in your sewage drain. The appropriate plumber can rapidly repair your sewer pipes and guarantee that your system is up and running
  • However, not all plumbers are equal.

Ten Ways to Unclog A Sewer Line

When the main sewer line becomes clogged, water will begin to pool around your feet while you are showering. If the main sewage line is damaged, it will be quite expensive to repair since you will have to hire a professional plumber to do the work for you. A professional plumber has access to a few instruments that may be used to properly clear sewage blockages without causing damage to the main sewer drain or the sewer line itself. A sewer line inspection camera helps plumbers identify the problem, while augers (drain snakes), high-pressure water jets, and professional-strength drain cleaners assist them in breaking up or dissolving the blockage.

Small clogs may often be resolved with the use of chemical drain cleaners purchased at a shop, but severe obstructions will require the attention of a professional plumber who can examine all of the sewage lines to ensure that every clog (yes, there may be more than one!) is caught and removed.

The mechanical drain cleaning method, the hydraulic drain cleaning method, and the chemical drain cleaning method are all options for you to consider.

Cleaning is required when you have a blocked sewage line as well as during routine maintenance and repair. Don’t hesitate to contact us if you require assistance with drain cleaning services.

  • Using pressure water to break apart and force away obstructions is what hydraulic sewer cleaning procedures are all about. To clear clogs in different types of pipes, plumbers use specialized nozzles
  • Mechanical sewer cleaning methods include rodding, bucket machines, and the use of capsules known as pigs. These scrape or push material out of the way in order to clear the sewage obstruction. Bucket machines are particularly useful for clearing severe obstructions from huge sewage systems. When it comes to sewer cleaning, chemical procedures entail the application of chemicals to clear a clog in the pipes. Chemicals, on the other hand, must be utilized with caution since they have the potential to harm plants, animals, and the surrounding soils. Some sewer systems may be cleaned with the use of biological materials that include enzymes and bacteria.
See also:  What To Do When Septic Tank Light Is On? (Solved)

You may also unblock your main line by using a variety of conventional ways, which are listed below. Here are seven quick and easy solutions to unclog your main sewer line that are both basic and effective.

1.The Bent Wire Hanger

Straighten a conventional wire hanger as much as you can, and bend one end to form a hook for hanging. To begin, insert that end into the drain cover and begin pulling out any items that may be causing the blockage. Be careful not to push the gunk further down the drain. Once you’ve gotten everything out, flush the clogged sewage line with hot water to clear it.

2.Vinegar and Baking Soda

Baking soda is a fantastic cleaning agent because it is a mild alkali that can easily dissolve dirt and grease, making it a great all-purpose cleaner. Vinegar deodorizes the drain line by neutralizing the acidic odor molecules that are present in the drain line. 1/3 cup white vinegar and 1/3 cup baking soda should be mixed together and poured down the clogged sewage drain as soon as it is made bubbly by the vinegar and baking soda. You may use vinegar to unclog your main sewer line if you don’t know how to do it yourself.

After one hour, flush the pipe with hot water to remove any remaining residue.

3. The Wet and Dry Vacuum

When it comes to unclogging a blocked sewage line, a wet and dry vacuum is an excellent tool to have. In order to avoid a mess, you must first cover the vent and then construct a tight seal over the drainage line. As soon as you switch to Liquids in the vacuum settings, the machine will have enough power to suck all of the liquids out of the pipe and into the bag. If it doesn’t work, try unclogging the drain with a hanger to see if that helps.

4. Boiling Water

Boil as much water as you can in an electric kettle as quickly as possible. Pour the water into the drain in little amounts at a time, allowing it to percolate gradually. The hot water will remove the grease and filth that has clung to other debris and caused clogs to form in the pipes.

5. Caustic Soda

Because caustic soda can inflict serious chemical burns, it is best to begin by wearing rubber gloves and goggles to protect your skin. In a mop or bucket, combine 3 cups of caustic soda with 15 liters of water and stir well. Once you’ve thoroughly mixed the ingredients, the mixture will begin to bubble. It should be poured into the drain lines and allowed to sit for 30 minutes. By flushing the drain with hot water, you may make it completely clear.

6. Cleaning the Pipe

Dirt and grease can clog the flex pipe beneath the sink, causing it to become obstructed. To prevent bad water from leaking out of the pipe while you are loosening it, you should place a bucket beneath the sink to catch the waste water. With a wrench, loosen the nuts and then carefully remove them by hand. Using the U-shaped pipe, empty the contents of it into the bucket. Remove any remaining debris from the pipe by brushing it out with a toothbrush. Flush the pipe with hot water and tighten it once more to ensure it is secure.

7. The Drain Snake

An auger that is flexible and thin, a drain snake is used to loosen obstructions from drains in your property. When dealing with tough clogs that a plunger is unable to clear, a plumber’s snake comes in helpful to clear the way.

Push one end of the snake into the clogged drain and turn the handle until the drain is unblocked. Continue to push it until you encounter some resistance. Once you rotate it against the blockage, the debris will be expelled from the machine.

8. Salt and Baking Soda

Adding salt and baking soda to a drain can cause a chemical reaction that will unclog the drain completely. It is possible to make the optimal drain cleaning agent by combining salt and baking soda in a 1:2 ratio by mixing them together. Pour the liquid into the drain and allow it to rest for a few hours to dissolve the grease. Then, using boiling water, thoroughly clean the drain lines.

9. Dish Detergent

You should be aware of what to do if your drain becomes clogged before calling a plumber to come and clear it out. It is possible to use a dish detergent in conjunction with the mechanical ways to unclog a clog in the drain. Pour a quarter cup of dish detergent into the toilet bowl and fill with hot water to flush the toilet. It will function as lubrication, and the boiling water will dissolve the dirt and grease. More hot water should be added, and a plunger should be used to unclog it.

10. Baking Soda, Vinegar, and Water Pressure

If your bath drain is clogged, you may unclog a drain pipe by mixing baking soda and vinegar together. In addition, depending on the type of the blockage, you may require a plunger and a drain snake. In a 1:2 ratio, combine baking soda and vinegar, and then pour the mixture into 60 gallons of warm water. As you pour the water down the drain, use the plunger or drain snake to keep the water from backing up. If you’re wondering how to unclog a main sewer line, the pressure of the water can readily release any material that’s clogging the pipe.

Hire A Professional Plumber to Unclog the Line

As a result, if you are unable to resolve the problem with home remedies, it is likely that the problem is located elsewhere, such as the municipal sewer drain system. When the main sewage line becomes blocked, you will want the services of a professional plumber to snake or hydro-jet the pipe that links the drains in your home to the municipal sewer line. Hydro jetting is a complicated technique that involves the passage of high-pressure jets through drain pipes in order to break up blockages and remove all debris from the system.

Also, feel free to contact us for any other plumbing services you may want.

We will locate and clear the blockage in the sewage drain as soon as possible to prevent additional harm.

Providing service to Metro Atlanta and the neighboring areas, we provide free estimates as well as emergency services as required.

Clogged Drain or Clogged Septic Tank?

Robs Septicon is the author of this piece. Postings under Uncategorised A blocked septic tank can cause difficulties that are quite similar to those caused by a clogged drain. Knowing the difference between the two might assist you in taking care of your house. Here’s all you need to know about the situation. When a septic tank overflows, why do drains become clogged? The septic tank is a holding tank that is located underground. All of the wastewater from the house flows into the septic tank, which steadily fills up with garbage over time.

  1. Towards the top of the tank, there is a pipe that flows into the yard, into an area known as the drain field, where the tank is located.
  2. The dirt filters the water and kills the bacteria that are there.
  3. It is possible for the septic tank to fill up without any water draining out if the pipe leading into the drain field becomes clogged.
  4. As the water rises via the main line, the capacity of fixtures in the house to drain correctly diminishes.
  5. The drains will become sluggish if the septic tank is just half blocked, as the water strains to make its way down into the septic tank.
  6. What Are the Signs of a Septic Tank Clog?
  7. It can be difficult to tell the difference at times.

Due to the fact that they are the most closely associated with the septic tank, the lower drains in the home will be affected first when the septic tank overflows.

In addition to being more sluggish, they may begin to produce unusual noises, such as gurgling sounds, as they age.

Local clogs often only impact a single fixture or a small number of fixtures that are linked to it.

If all of the other fixtures in the house are operating properly, this is an indicator that there is a blockage in the house rather than in the septic tank itself.

A blockage in a septic tank should not be repaired by someone who has just rudimentary expertise or who lacks the necessary instruments.

In certain cases, you may be able to address the problem yourself if you suspect that the blockage is in the pipe rather than in the septic tank.

Allow for an hour or two for the mixture to settle in the pipe before using it.

Depending on how large the blockage is, this may be sufficient to empty the pipe.

An auger is made out of a long, rigid cable with a pointed, twisting end at the other end.

A plumber may be required if neither of these approaches proves effective in clearing the clog from the drain.

Chemical drain cleaners have the potential to harm beneficial microorganisms in your septic tank, which might lead to another clog in the future.

Clogs in septic tanks can arise for a number of different causes.

Many septic tanks require pumping every three to five years, depending on the size of the tank.

Exactly What Should You Do If You Suspect You Have a Septic Tank Issue?

An inspection by a septic tank firm will allow them to determine whether or not the tank needs to be drained.

Rob’s Septic Tanks, Inc. can provide you with further information on clogs and septic tanks. We’ll be pleased to answer any questions you have and provide you with further information.

How to Unclog a Septic Tank

A septic system is a wastewater treatment system that is self-contained and located underground. This type of system is most commonly used in rural regions since the distance between households is so great that centralized sewer systems are not particularly cost effective in these places. They are used to dispose of household waste on-site, and because of their simple design, they are less expensive to install and maintain than other methods. As a matter of fact, they are typically built in a homeowner’s backyard, and as a result, they do not necessitate the use of sewage lines, resulting in them being less harmful to the environment.

  • Wastewater from the residence is sent down the sewage line and into the septic tank, where it remains.
  • There are three layers of wastewater that form inside the tank: solids that are lighter than water (e.g.
  • The sludge and scum layers stay in the tank, where bacteria that are naturally found in wastewater break down the particles and remove them from the system.
  • In this case, the cleared liquid flows from the tank to the drainfield or distribution device, as previously stated.
  • This consists of a succession of trenches or a single bed coated with gravel or course sand that is buried one to three feet below the surface of the ground and is connected to the main sewer line.
  • Another benefit of having a drainfield is that it treats wastewater by allowing it to flow from the pipes into the gravel and then further down into the ground.
  • Despite the fact that this approach is successful, it is prone to failure (particularly if not much attention is being paid to it).
  • Overflowing toilets on a consistent basis
  • It is the drains that are making these strange gurgling sounds. When you empty a sink, the water will back up into the shower or bathtub. You will see that there is an overflow where your washing machine is positioned. If foul odors pervade the air or garbage is visible on the ground, it is time to act. Your drains are emitting an unpleasant odor
  • Your toilets flush at an inordinately slow rate
  • Streams and ditches in the vicinity get contaminated as a result. You’ll see dips in the earth around the soakway drain or the septic tank
  • These are called septic tank dips.

How to Solve a Septic Tank Clogging Problem

There will be times when you have septic tank problems, but you will not always have to dig up your tank or drainfield to remedy the problem. When you dig up your septic tank, the last thing you want is for your yard to become a mucky mess that will take days to clean up after you have finished digging. Following that, here are some suggestions to assist you in unclogging your septic tank: 1: Determine what is causing the clog to occur. As previously said, you do not always have to dig out your tank when you have a clog in your toilet.

  1. In reality, the problem may just be a buildup of debris that has accumulated through time and has to be removed.
  2. They can use equipment to determine whether or not there is a problem with your system in the first instance.
  3. If your problem is not mechanical in nature, you will not require the use of any of those equipment to resolve it.
  4. It is possible to unblock obstructions using bacteria since it behaves like an acid.
  5. Sludge will be released by adding chemicals to the mix, but this will also allow the sludge to enter your system, making the situation even worse.
  6. You may search online for bacteria merchants who are willing to sell to you.
  7. Why should this be the case?
  8. 4: Allow bacteria to do its work.
  9. This is due to the fact that you have no way of knowing how much sludge you have in your tank, as well as in your lines and field.

It is common for bacteria to be chosen as the remedy of choice because they are organic and will not affect systems in the same manner that chemicals would do. Bacteria reproduce and consume any organic matter that comes into contact with them as they move through the environment.

Reducing the Clogging of Septic Tanks

Maintenance is always essential in ensuring that you do not suffer as a result of a clogged septic tank. Yes, sludge accumulates over time, but taking proper care of your system now will save you a lot of hassle in the future. Although it is advised that you get your tanks cleaned out once a year, the frequency with which you do so is determined by the following factors:

  • The number of people who live in your home
  • The size of your home. The quantity of wastewater produced (the amount created is, of course, based on the number of people living in your household)
  • And The amount of solids present in the wastewater (for example, the use of a garbage disposal influences the amount of solids present in the wastewater)

It is not necessary to do routine maintenance on your septic tank’s absorption field. Nevertheless, this does not imply that you should take it for granted. Fortunately, there are certain things you can do to ensure that it is always working and protected.

  • Do not drive automobiles, trucks, or heavy equipment through the field. Do not grow trees or bushes in a field since the roots of these plants can get into the irrigation system and cause a blockage. Don’t use hard surfaces to cover the playing field (concrete, asphalt, etc). Grass is the most effective ingredient to employ if you want to provide shelter since it prevents erosion and drains excess water. Surface runoff water from roads, rooftops, patios, and other locations should not be diverted back into the fields.

Leave a Comment

Your email address will not be published. Required fields are marked *