How To Take Top Off Septic Tank? (Solution)

Some tank lids have built-in handles to pull on, but others require a pry bar to lift them open. If the lid comes with handles, ask for the assistance of a friend or family member to remove the lid. If it doesn’t, push a screwdriver into the seam around the lid and insert the pry bar into the gap. Then, press down.

  • However you can usually loosen the stuck septic tank top by some thoughful hammering with a SMALL sledge, with CARE so as not to break open the top of the tank. Try tapping around the edges of the cover a few times. Wear goggles so you don’t get infected debris in your eyes.

Can you replace the lid on a septic tank?

Concrete septic tank covers require replacement when they develop cracks or other damage. These can be purchased online or at a home improvement store near you. Many septic tanks have risers so the lid is visible above ground.

What is the top layer in a septic tank?

Scum – The top layer of the septic system is made up of scum. This comes from things like soap byproducts and cooking oils which go to the top of the wastewater tank. Sludge – The bottom layer of your septic system is made up of a material called sludge.

Why does my septic tank have 2 lids?

Solid, watertight, buried tank made of concrete, plastic, fiberglass or metal. This tank has a way in (inlet), and a way out (outlet). So, most residential tanks should have (2) lids about 5′ away from each other. A septic tank holds all the liquid waste from your home (toilets, sinks, kitchen, bathtubs, floor drains).

Do septic lids need to be sealed?

Like wells, septic systems have problems if they are not sealed from outside surface water. Most septic systems rely on buried pipes to get rid of the fluids. The lid covers should fit tightly — if they don’t, a company that specializes in septic repairs should be called to fix them.

What are the signs that septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

  • Your Drains Are Taking Forever.
  • Standing Water Over Your Septic Tank.
  • Bad Smells Coming From Your Yard.
  • You Hear Gurgling Water.
  • You Have A Sewage Backup.
  • How often should you empty your septic tank?

Can I shower if my septic tank is full?

Only the water would get out into the leach field in a proper system unless you run too much water too fast. The thing to do is to run your shower water outside into it’s own drain area, but it may not be allowed where you are. Used to be called gray water system.

How do you tell if your septic tank is full?

How to tell your septic tank is full and needs emptying

  1. Pooling water.
  2. Slow drains.
  3. Odours.
  4. An overly healthy lawn.
  5. Sewer backup.
  6. Gurgling Pipes.
  7. Trouble Flushing.

How far apart are the lids on a septic tank?

The distance between lids will be different for each sized tank: 1000 gallon tank = 6-6.5 ft.; 1250 gallon = 7-7.5 ft.; 1500 gallon = 8.5-9 ft.. Dig up the outlet chamber access lid. If you are extraordinarily lucky, the as-built drawing is accurate and you have hit the lids spot on.

How do I know how many lids my septic tank has?

Locate The Lid Probe around the tank to locate its edges and mark the perimeter of the rectangle. A septic tank installed before 1975 will have a single 24-inch concrete lid in the center of the rectangle.

How do you cover a septic tank lid?

The Do’s For Hiding Your Septic Tank

  1. Plant tall native grasses with fibrous roots around the opening to conceal the tank lid from view.
  2. Place a light statue, bird bath or potted plant over the septic lid.
  3. Septic tank risers and covers are an alternative to concrete and blend into green grass.

How do you seal a septic riser?

Seal the riser to the septic tank using the patch mix. You may finish sealing by adding Bentonite or casing sealer around the base, filling in gaps as needed. Make sure you then carefully secure the riser lid with the screws provided to avoid a safety hazard! All risers must be completely sealed to the septic tank.

How to Remove a Septic Tank Lid

A septic tank lid is the section of the sewage tank that is located at the top of the tank. This lid must be removed at least once every several years in order to completely empty the tank. Every three to five years, depending on the size of the tank, a homeowner will need to have the septic tank pumped out and cleaned. Avoid allowing the tank to become overflowing, causing it to begin backing up into the home or overflowing out of the opening. The tank suffers serious damage as a result of this.

Step 1 – Locate Septic Tank

A septic tank lid is the section of the sewage tank that is located at the top of the tank. This lid must be removed at least once every several years in order to completely empty the tank. Every three to five years, depending on the size of the tank, a homeowner will need to have the septic tank pumped out and cleaned. Avoid allowing the tank to become overflowing, causing it to begin backing up into the home or overflowing out of the opening. The tank suffers serious damage as a result of this.

Step 2 – Dig Up Septic Tank Lid

A septic tank lid is the section of the sewage tank that is located at the top of the tank. This lid must be removed at least once every several years in order to completely empty the tank. Every three to five years, depending on the size of the tank, a homeowner will need to have the septic tank pumped out and cleaned. Avoid allowing the tank to become overflowing, causing it to begin backing up into the home or overflowing out of the opening. The tank suffers serious damage as a result of this.

Step 3 – Pry Off Septic Tank Lid

The lid of the septic tank might be rather hefty, depending on the size of the tank. On all sides, it is a solid block of concrete that is perfectly flat. It could have a handle that you can pull on. Pry bars are required to remove the majority of septic tank lids from their resting positions. Set the prybar in the seam and push it down until it is secure. As the lid begins to rise out of the hole, have someone assist you in moving it to the side. Place the lid on the ground’s surface so that it is not in the path of the pumping vehicle.

How to Remove Septic Tank Lid: The Ultimate Step-by-Step Guide!

Sewage tank maintenance is made easier by understanding how to remove a septic tank lid properly. Fortunately, the removal process is pretty basic and, in the majority of cases, does not necessitate the use of a professional’s assistance. This tutorial is meant to assist homeowners with removing the lid from their septic tank in a correct and safe manner. Let’s get this party started!

How to Remove Septic Tank Lid

Removing the cover of a septic tank is a pretty simple procedure.

Because most septic tank lids do not come with a lock, they may be opened at any time with the proper tools and materials.

You’ll Need:

  • Screwdriver, shovel, pry bar, metal detector (optional), broom, and other tools

Step 1: Locate the Septic Tank

In most areas, septic tanks must be located at least 10 feet away from the house’s foundation in order to function properly. It is possible to monitor their whereabouts by tracing the path of the drain as it leaves the residence. It’s possible that you’ll need to call your local health department instead if you can’t follow it down through the drainage system. If they’ve given permits for the system, it’s probable that they have a record of the location of the septic tank. If they don’t, get in touch with a reputable septic system company and inquire as to where it could be hidden or hidden from view.

It is possible to locate the approximate position of the septic tank using a metal detector if the tank is buried underground.

As a result, a metal detector will undoubtedly assist you in your hunt.

If it makes contact with something substantial, you’ve discovered your container.

Step 2: Dig Up the Lid

Septic tanks are often located beneath ground level. A covering of dirt or grass is frequently placed on top of them to prevent mishaps and odors from escaping because they require little care aside from the biannual or triennial pumping. Bring a shovel or other digging instrument with you to assist you in excavating the earth once you’ve discovered the tank. The lid should be perfectly flat on the tank, with the exception of a little seam around the edge. Prevent dirt from dropping and sliding down onto the lid by digging out at least 16 inches of earth on all sides and around the top of it.

Most tanks feature two or three lids, depending on their size.

Step 3: Remove the Lid

Due to the fact that septic tank lids are often built of concrete or steel, they are extremely tough to force apart and remove. When it comes to tank lids, some have built-in handles that can be pulled on, while others require the use of a pry bar to lift them open.If the lid does not come with handles, enlist the help of a friend or family member to remove it.If it does not come with handles, insert a screwdriver into the seam around the lid and insert the pry bar into the gap that has been created.

  • If you violently pry the lid open, it may break or chip around the edges.
  • If everything is done correctly, the lid should spring out with little effort.
  • In the event that you are having difficulty lifting the lid using a pry bar, you may want the assistance of a backhoe.
  • And that’s all there is to it!
  • Your tank’s lid has been successfully removed.
  • Check that the seal between the tank and the lid is tight and smooth before continuing.

Place soil or grass on top of the tank’s lid, and then designate the position of the tank with an appropriate marker such as a sign or an ornamental stepping stone. You will avoid having to deal with the trouble of moving the tank’s cover in the future if you do this.

Septic Tank Lid Safety and Precautions

Approximately 80% of all septic tank accidents are the result of improperly shut lids. Unfortunately, not everyone who accidently falls in is able to walk away without injury. Prevent a catastrophe from occurring by taking some of the following precautions:

  • Check the condition of the tank’s lids on a regular basis. Bolts, screws, and other locks should be used to secure the lids to prevent unauthorized entry. It is never safe to leave an open lid alone, even while it is being pumped or fixed. After working on the septic system, always double-check that the tank lids are properly closed and secure. Educate young children on the importance of not opening or playing with septic tank covers. Understand the exact location of the septic tank lids on your property
  • Vehicles and heavy gear should never be driven or parked on top of septic systems, since this may cause the lid to become dislodged or damaged. Stay away from the septic tank’s entry since the gases might knock you out. If you’re near a septic tank, don’t burn a cigarette or do anything else that may cause a fire. Septic tanks emit methane gas, which is very flammable and explosive. Whenever you are excavating outside, keep an eye out for hidden mechanical or electrical wires. No matter how precious something may appear to be, it is never safe to remove anything from a tank. Instead, you should hire an expert to collect it on your behalf. If someone falls into the tank, do not go in after them unless you are equipped to do so safely and effectively. Please dial 911 as soon as possible, and make sure the individual does not drown by placing a floating device in the tank.

Final Thoughts

We hope this tutorial was useful in assisting you with the procedure of lifting the lid of your septic tank! Allow us to conclude this piece with a final word of caution: until absolutely essential, leave the maintenance of your septic system to the experts. Open the lid only when you need to monitor the level of the tank’s liquids or gases. Wishing you the best of luck!

Procedure for Opening Septic Tanks

  • ASK a question or make a comment about how to open a septic tank safely and properly for inspection or cleaning.

InspectAPedia does not allow any form of conflict of interest. The sponsors, goods, and services described on this website are not affiliated with us in any way. Instructions on how to open the septic tank. The location of the septic tank cleanout or cover, as well as the access and opening processes. We discuss some of the things to look for before opening the septic tank, such as subsidence, indications of recent work, and septic tank coverings that are not suitable to use. Then we demonstrate how to remove the septic tank lid or the access port cover from the tank.

See also:  How Does The T In A Septic Tank Work? (Solved)

For this topic, we also have anARTICLE INDEX available, or you may check the top or bottom of the page.

Procedures for Safe Opening of a Septic Tank, Cesspool, or Drywall for Inspection or Cleaning

The following are the contents of the article:

  • How to remove the lid from a septic tank
  • When it comes to pumping out the septic tank, which septic tank entrance should be used? Why

In this septic tank pumpout article series, you’ll learn how to locate, open, pump out, clean, and inspect conventional septic tanks, as well as how to locate, open, pump out, clean, and inspect conventional septic tanks using photos. In addition to septic pumping tank truck operators, this guideline is meant to provide basic information to homeowners and septic service providers that are concerned about septic system maintenance.

  • There is a risk of dangerous, perhaps deadly collapse due to subsidence (depressions or low regions in the earth) near the location of the septic tank. Evidence of recent construction activity that may necessitate further investigation in order to determine the status of the septic system
  • Backup or effluent breakout at the surface of the ground in the septic tank region.
  • Here is an example of a septic tank cover that was discovered atop an unstable home-made collection of concrete blocks that had been piled by the owner to serve as an access well to his septic tank. Because the masonry blocks were misaligned and loose, and because the tank aperture into which the cover opened was bigger than the cover, there was a serious collapse risk that may have resulted in a deadly hazard. We covered the area with plywood and roped it off, and we quickly informed the residents and the property owner of the situation, both verbally and in writing

Procedure for Opening the Septic Tank Pumping Access Port

It is necessary to clean the septic tank using a cleanout port, which is normally positioned in the center of the tank. A small access opening, such as one over an intake or outlet baffle, does not provide enough space for adequate sludge removal from the septic tank bottom, and it increases the likelihood of future clogging of the tank’s inlet or outlet due to partially removed floating scum that has not been completely removed from the tank bottom. In this particular scenario, we already had the measurements to the exact placement of the septic tank cleanout cover due to previous work.

A wrecking bar is set to be used to remove the cover from the vehicle. It is important to note that we excavated far enough away from the tank entrance so that when we remove the lid, we will not have a large amount of dirt falling into the septic tank.

Reader CommentsQ A

@Ron, In order for a concrete septic tank lid to be correctly erected, it must feature both access openings and cast in iron loops to which a hoist may be attached. Alternatively, if your septic tank cover does not have those points of purchase for lifting, you will require a flat bar and a larger wrecking bar to pry up the excavated lid from the septic tank sufficiently to allow you to put a chain around the lid, most likely two Chainz, and lift the lid with a hoist and tripod mechanism or you will use an on-site motorized hoist.

  • 1/2 x 27/4 removing the top of a septic tank @Phil, Although what you describe is theoretically doable, it may be less expensive and more rational to do so in a different way.
  • This is due to the fact that just stitching a circular hole does not ensure that I am creating a hole through which the lid will not be dropped.
  • Edge My concrete septic tank, which was constructed when the home was built in 1979 and does not have any manholes or openings for pumping out, is in poor condition.
  • Is it feasible to cut two manholes using a concrete saw that are 20″/24″ in diameter and then build risers and a cover on top of them?
  • Can you provide a snapshot of the tank top?
  • It is common for the concrete top to be tapered; nevertheless, it may just be trapped by effloresent salts and filth.
  • I have a feeling that simply tugging will not be effective.

This would have stopped leaks but would have made it extremely difficult to open the tank for the next person who needed to open the tank.

Repeat this process many times all around the cover’s perimeter.

For me, this has worked almost every time in the past.

It is recommended that you build a septic tank riser that is sealed to the tank top, as well as a new secure cover on top of the riser if your septic tank lid is not near to the ground level.

Never work on your own.

I’ve erected two wood 4x4s on top of the lifting ring to provide additional support.

All I’ve done three times is shattered those 4x4s.

Do you have any recommendations?

A septic tank pumping provider can remove plastic bags, tiny pebbles, and other debris from your tank, as well as the sediments, scum, and sludge that has accumulated there.

What is the best way to get them out?

When the septic tank is drained out, would it make sense to place a plastic bag over the top hole of the tank to keep the odors contained?

Gerard A plastic bag as a sewer line cap doesn’t seem right to me – it’s not durable, it’s the incorrect material if a cover is required, and if it’s a vent rather than an access pipe, the vent must be open to the atmosphere and protected from animal intrusion.

What is the function of this item?

A typical septic tank is equipped with clean out access covers that are strategically placed.

Maybe something as basic as a flat piece of concrete or stone will be sufficient, or maybe something more complex.

To be quite honest, I would have expected the contractor who dug the hole to be accountable for ensuring that the system was repaired and safe.

What should I do to solve it?

What store would I go to in order to acquire septic tank covers?

A few years ago, I had a beautiful new house built for me.

I have three plastic polylok lids, one of which is above ground and is for the pump.

I’d like to purchase risers so that I may build all three at a depth of around 6 inches below ground level.

What are the advantages and disadvantages.

Do you have any other suggestions?

I apologize for the lengthy post.

Sorry, but “True Bolt” isn’t a phrase I’m familiar with or associate with septic tank lids in any way.

Although this is not always the case, Mary, as the pumper may be able to access the entire tank bottom from a single opening depending on the tank’s size and shape; however, if your pumper is unable to do so from a single opening, you may want both openings opened to inspect the condition of the tank baffles.

There are two holes in my septic tank. Is it necessary to open both doors for a pump out?

Question:cannot find the manhole cover of the septic tank

(8th of August, 2014) “We’ve located the cesspool concrete lid (about 12 foot diameter), but after digging a 2 foot perimeter, we were unable to locate the manhole cover, which was required for an inspection.” vicki levin stated Help? My husband is becoming increasingly upset with the digging!


If it’s a cesspool, rather than a septic tank, and it’s spherical, the access lid is normally located in the center of the container.

Question: how do i remove septic tank lid that is stuck

The entrance lid would normally be in the center of the cesspool, if it is in fact a cesspool rather than a septic tank, and it is spherical.


Anon:WARNING: If the septic tank cover, lid, or access aperture has partially caved in or sank into the tank, the condition is extremely dangerous – an unsecure cover implies that someone might fall into the tank, which is generally lethal very quickly. Please keep everyone away from the septic tank area until such time as you have had the tank inspected and opened for additional inspection by a professional. Depending on the tank type and condition, lifting the lid may necessitate the use of a pry bar or wrecking bar, as well as a small portable winch (which is unusual).

Alternatively, consider the following:

Septic Pumping ProcedurePumper Truck Operation Articles


Suggested citation for this web page

HOW TO OPEN A SEPTIC TANK at Inspect a Tank An online encyclopedia of building environmental inspection, testing, diagnosis, repair, and issue preventive information is available at Alternatively, have a look at this.


Alternatives include asking a question or searching InspectApedia using the SEARCH BOXfound below.

Ask a Question or Search InspectApedia

We encourage you to use the search box just below, or if you prefer, you may make a question or remark in theCommentsbox below and we will get back to you as soon as possible. InspectApedia is a website that allows you to search for things. Please keep in mind that the publication of your remark below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link. Your submission will appear when it has been reviewed by a moderator. We sincerely apologize for the inconvenience.

Technical ReviewersReferences

Citations can be shown or hidden by selecting Show or Hide Citations. is a publisher that provides references. Daniel Friedman is an American journalist and author.

How to Open a Septic Tank Lid

Find the location of the septic tank. The tank must be at least 10 feet away from the house foundation, according to most building rules. The location and direction of the drain as it exits the house should offer a good indication of the tank’s location and direction. For the purpose of locating the tank, it may be required to drill a number of test holes.

Step 2

Remove the dirt off the top of the tank using a shovel. The lid of the septic tank will be a square piece of concrete that will be installed at the center of the tank’s interior. Depending on the kind of tank you have, it will be around 18 inches square at the most. Remove the dirt from the lid’s edges as much as possible, and try to slant the sides of the hole to assist prevent dirt from moving and sliding down the sides of the hole.

After you have removed all of the loose dirt, whisk away any leftover dirt. It is critical to remove as much dirt as possible from the tank so that none will enter the tank when the lid is removed.

Step 3

Make a small indentation with the screwdriver in the seam surrounding the lid. As soon as the seam begins to open slightly, insert one edge of the pry-bar into it and pry it upwards. Because the lid may be fairly heavy, you should have a companion nearby to assist you in removing it from the hole. Keep an eye out for any cracks or chips in the tank’s borders or the lid itself when doing this procedure. It is critical to have a tight, smooth seal between the lid and the tank when using this method.


In order to avoid accidentally back-filling the hole when the repairs are finished, make a note on it. It is best to indicate the placement of the tank lid with a tiny stepping stone that is flush with the surface of the ground. If you need to re-open the tank in the future, you will save time and effort by doing so now.


Never go into a septic tank or allow anybody else to get into one. Suffocation and death can occur quickly as a result of the gases and lack of oxygen.

How do you remove a lid from a concrete septic tank?

After you’ve located the septic tank, you may begin the process of digging up the lid and removing it. To locate thelid, dig the dirt around thetank using a shovel until you discover it. With a little seam all the way around, it will be flat and flush against the tank. Remove enough soil from around the lid to provide for at least 16 inches of clearance on all sides of the lid. Lid Made of Concrete

  1. Debris should be removed from the damaged region of the concrete lid. Using a wire brush, rough up the surface of the region
  2. In a wheelbarrow, mix enough concrete to completely fix the lid in a single batch
  3. Using a broad trowel, apply concrete mix to the damaged region of the tank lid.

It is also possible to inquire whether septic tanks have concrete lids. The majority of concrete septic tanks are constructed with thick concrete lids over the manholes and access holes, which are subsequently filled with soil. While this is a satisfactory installation, many septic specialists recommend that the concrete lids be replaced with plastic risers and lids to provide for easier access to the tank for examining and cleaning. To put it another way, how do you open a septic tank lid? TheLids Should Be Dug Up Typically, the lid and other septic tank components are placed between 4 inches and 4 feet underground in the majority of situations.

See also:  How To Connect Leach Pipe To A Yellow Plactic Septic Tank? (Solution)

If you are unable to locate thelid by probing, shallow excavation along the tank’s edge with a shovel should disclose thelid.

Bolts, screws, or other types of locks can be used to fasten the lids and prevent unauthorized entry.

When examining or having your septic system pumped, never leave an open lid unattended while doing so.

Can’t remove septic tank lid

Over 680,000 strictly plumbing related postsWelcome to the We are the best online (strictly) PLUMBING advice, help, dyi, educational, and informational plumbing forum. Questions and discussions about toilets, sinks, faucets, drainage, venting, water heating, showers, pumps, water quality, and other exclusively PLUMBING related issues.Please refrain from asking or discussing legal questions, pricing, where to purchase a product, or any business issues, or for contractor referrals, or any other questions or issues not specifically related to plumbing.Keep all posts positive and absolutely no advertising. Our site is completely free, without ads or pop-ups. We do not sell your information. We are made possible by:
Can’t remove septic tank lid
Author:FrontRanger (CO)Hi, first post here. This issue may have come up before but I wasn’t able to find it using the Search feature.I’ve got a two-chamber concrete septic tank. The previous owners used to pump out the tank by removing only the lid on the inlet-side chamber. Now the concrete lid on the outlet-side chamber can’t be removed. The septic serviceman said that it hadn’t been removed in so long, the concrete had “re-set”. The way he explained it, irrigation and rain water soak through the soil, then get into the concrete, and over time form a bond. He also said that you can’t pump/clean/inspect the tank properly without removing that lid. Naturally, I called up the previous owner, but he had a different story. I wanted to get some impartial advice to find out who was right, so here goes:1. The previous owner didn’t think it was necessary to remove the outlet-side cover. He said the septic pumping company was able to put their hose in over the baffle and pump out the outlet-side chamber. I’m no expert but I don’t see how that’s possible, given the size and flexibility of the hose, and the extremely limited visibility with the hose in the hole. Is it possible to properly pump out the tank removing only the inlet-side lid? If so, how?2. If the answer to the first question is that you truly need to remove the outlet-side lid, what is the best way to solve the problem of the “re-set” concrete in the lid? The tank is located close to my house, beneath a lawn with sprinkler lines (both water and electrical) cleverly running right over the tank. Not the best choice on the part of the installer but naturally I want to minimize the excavation in that area.In case the options are specific to location, I’m located in Northern Colorado.Thanks!
Post Reply
Re: Can’t remove septic tank lid
Author:hj (AZ)what are you using to lift the lid? I have never had a problem even when the lid was set with mortar.
Post Reply
Re: Can’t remove septic tank lid
Author:FrontRanger (CO)The lid has what looks like a curved piece of re-bar set into it. The septic service guy was prying up on that with something, I didn’t see exactly what he was doing. Then he took a digging bar and started chipping away little pieces at the seam between the tank top and the lid, then tried prying up in that little space. After doing that unsuccessfully he said the concrete had “re-set”.
Post Reply
Re: Can’t remove septic tank lid
Author:mm (MD)Fasten a chain to the lid handle and then wrap and tie it off around a digging bar that is held horizontally 2-3 feet above the tank.Have someone (a helper?) apply upward leverage on the bar against the ground while you take a second digging bar and, using the hammer end, gently but firmly pound on the outer edge of the concrete lid.It will come up.The lids are often set in tar to seal them against water seepage into the tank so they are tight, but it will release.Edited 1 times.
Post Reply
Re: Can’t remove septic tank lid
Author:FrontRanger (CO)Thanks, m m. Now that you mention that, I remember the septic service guy talking about that briefly, and also a variation using a jack to apply the force. He said he thought since it had been so long since it was last removed, the re-bar would break out of the concrete before the lid came up. I know that the previous owner had not removed it since 1995. Don’t know about the owner before that, but he might not have taken it off since it was installed in 1978!There was no tar or tar paper visible in the chipped-away sections. some sort of barrier seems like an obvious step for anyone who installs these things for a living, but it looks like it was omitted in this case.
Post Reply
Re: Can’t remove septic tank lid
Author:hj (AZ)I usually call a tow truck and use his hook in that rebar.
Post Reply
Re: Can’t remove septic tank lid
Author:hj (AZ)A couple of log splitting wedges between the lid and the tank will also help.
Post Reply
Re: Can’t remove septic tank lid
Author:mm (MD)”A couple of log splitting wedges between the lid and the tank will also help”.About all they’ll help in doing is to obliterate the lid.
Post Reply
Re: Can’t remove septic tank lid
Author:hj (AZ)The lid is about 8″ thick, it is not going to be “obliterated” unless it is completely deteriorated.
Post Reply
Re: Can’t remove septic tank lid
Author:FrontRanger (CO)Thanks for all the replies so far, about how to free up the stuck lid.Anyone for the first question? Is it possible to properly pump out the tank removing only the inlet-side lid? If so, how?Thank you.
Post Reply
Re: Can’t remove septic tank lid
Author:Paul48 (CT)Logically.Why would they put 2 access holes if one was enough?
Post Reply
Re: Can’t remove septic tank lid
Author:hj (AZ)It appears that there are NO access holes just two halves of the lid. The center baffle doesn’t comeup the bottom of the lid so they just stick the hose into the other side.
Post Reply
Re: Can’t remove septic tank lid
Author:FrontRanger (CO)Re: It appears that there are NO access holes just two halves of the lid. The center baffle doesn’t come up the bottom of the lid so they just stick the hose into the other side.-Perhaps I’ve been using the wrong terminology. What I meant by “lid” was a roughly 18″x18″ opening in the top of the tank, i.e., the covering for the access hole.Re: Why would they put 2 access holes if one was enough?-The same track that my mind took. The question arose from the claim of the previous owner that one was sufficient, and that the hose could be put over the baffle into the outlet-side chamber. My skepticism comes from imagining a stiff 4″ hose maneuvering down a hole, over the baffle, and then into the other chamber. Two access holes would certainly make it more convenient. My question is, can it be done properly using only the one on the inlet-side?Thanks again for your time.
Post Reply
Re: Can’t remove septic tank lid
Author:hj (AZ)18 x 18 ports are NOT the same as two tank halves. It would be difficult to put the hose across, IF you have a center baffle. In this case there may not be one and everything can be done from a single port.
Post Reply
  • Messages that are inappropriate or that are obvious advertisements will be removed. Unfortunately, we cannot be held liable for incorrect or insufficient advise
  • Furthermore, has no control over external content that may be linked to from messages placed on this site. Please use caution when clicking on external links
  • is strictly for the exchange of plumbing-related advice and NOT for questions about pricing or costs, where to find a product (try Google), how to operate or promote a business, or questions about ethics (law) and the like
  • is also not a place to ask questions about radiant heating (try, electrical, or even general construction type questions
  • is strictly for the exchange of plumbing-related advice and NOT We are only here to answer plumbing-related questions.
Search for plumbing parts on our sponsor’s site:

Special thanks to our sponsor:

How to Find the Lid on a Septic System

All septic tanks eventually fill with sediments and must be pumped out on a regular basis in order to remain in excellent functioning order. If the tank’s lid is not on a riser at ground level and you are not the home’s original owner, you may be unable to determine where the lid is located.

A typical septic tank is 4 inches to 4 feet underground, with all of its components, including the cover, buried between 4 inches and 4 feet underneath. This is true regardless of whether the septic tank is equipped with special risers that keep the lid flush with the surface of the ground.

Consult A Map

First, choose with the most straightforward choice. The installation of septic tanks at all locations is recorded in most counties’ permission records, which are kept on file for future reference. Typically, this will include a schematic indicating the placement of the tank on the land, as well as certain dimensions that will allow you to measure to the precise site of the tank. If your tank was placed before your county made it a requirement to record the location of such tanks, you may find yourself with nothing to show for your efforts.

Search For A Sign

Septic tanks are placed in such a way that they are as unnoticeable as possible on the land. After the grass has grown back after installation and some time has passed, it is possible that just a few visual indications will remain. Pay particular attention to the contours of your yard for any inexplicable high or low points that might suggest the presence of an underground storage tank.

Follow The Pipe

Installation of the septic tank takes place along the sewage line that runs from the house into the front yard. Locate the 4-inch sewage pipe at the point where it exits the home in the basement or crawl space, if it is there. Locate the same spot outside and make a note of it. Insert a thin metal probe into the earth, identify the 4-inch sewage line, and follow it across the yard, probing every 2 feet, until you reach the end of the property. Septic tanks are required to be at least 5 feet apart from the home in all states except Alaska.

Whenever the probe makes contact with flat concrete, fiberglass, or polyethylene it indicates that the tank has been located.

Locate The Lid

The majority of septic tanks are rectangular in shape and measure around 5 feet by 8 feet. Investigate the tank’s circumference to determine its boundaries and outline the rectangle’s boundary using a pencil. A septic tank that was built before 1975 will have a single concrete lid that is 24 inches in diameter in the center of the rectangle. If the tank was built after 1975, it will have two covers made of fiberglass or polyethylene, centered at the ends of the rectangle and centered at the ends of the rectangle.

Call A Professional

Opening a septic tank is a job best left to the pros once the lid has been discovered. Concrete septic tank lids are extremely heavy, and many require the use of lifting tools to remove them completely. An open tank has the potential to release toxic gases. Anyone going around on the property who comes into contact with an exposed septic tank might be in risk. Because of the noxious vapors present in an open tank, falling into one can be lethal.

Mark The Spot

Make a note on the ground near where the tank was pumped by a professional and the lid was buried to serve as a reference in the future.

In order to keep track of where you are, you should choose a hefty circular patio tile that is embedded in the ground. Additionally, draw your own map of the area and store it with your other important papers.

How do you open a septic tank lid?

  1. Find the location of the septic tank. Most building rules require that the tank be located at least 10 feet away from the house foundation
  2. Remove the soil off the top of the tank. The septic tank lid will be a square piece of concrete that will be installed at the center of the tank. Insert the screwdriver into the seam along the lid’s perimeter

The majority of septic tank lids will require the use of a pry bar to be removed from their mountings. Set the prybar in the seam and push it down until it is secure. During the process of the lid lifting out of the hole, have someone slide it to the side. Place thelidon the surface of the ground so that it is out of the path of the pumping truck. Second, how do you remove a lid off a concrete septic tank that has been installed? Remove theSepticTank LidPlace a pry bar between the top of theseptictank and the bottom of thelid.

  1. One end of the concrete septic tanklid may be lifted up by pressing down on the pry bar.
  2. Start by inserting a tiny metal probe into the ground and following it across the yard, probing every 2 feet until you find the 4-inch sewage line.
  3. The majority of them are between 10 and 25 feet distant.
  4. A modest amount of bleach from a load of laundry will have no effect on the bacteria and water in your septic tank, which holds several thousand gallons.
  5. Never flush uncooked cleaners, bleach, or other home chemicals down the toilet or down the sink.

septic tank lid stuck

I had just dug up the septic tank in order to get it drained when I discovered that I couldn’t remove the concrete access lid. It has become “frozen” in its current location (more like “chemicallybonded” I would say). The tank is made of concrete, and the access lid is made of concrete as well. The accesscover is approximately 12″x18″ in size and has a rectangular form. It features a handle made of iron that is cast into the middle. It is designed with slightly slanted sides so that the cover fits snugly into the access hole when it is inserted (like a stopper ina utility sink).

  • It is adamant in its refusal to bend.
  • I attempted to pull the cover up around the sides with a crowbar, but it just resulted in chipped concrete.
  • What should I do if the “bond” that has developed between the cover and the hole cannot be broken by acid or any other chemical means?
  • Allow the pumping firm to take care of it?

Pulling the cable sideways with your hand or a fish scale might be used to determine the tension in the wire. With a 20 pound force in the middle of a 4′ cable with 500 pounds of strain, it would slide sideways roughly 1/2″ and break. Nick

I had the identical problem, except that the tank had been 4 feet underground for 25 years before I discovered it. When the front wheels of my tractor were airborne, I chained my carryall to the handle and hoisted it till it became airborne. After a while, the lid came off the cabinet. I recommend that you get a comealong that is placed on a tripod and pull with a NYLON rope until it stretches (NO MORE THAN 10%!) and allow it to sit in a state of tension for a bit. Perhaps you could even pour hot water on it to melt the tar paper seal, then place an ice block on the lid to shrink it more.

  • Bob [email protected] wrote:Thank you for your assistance.
  • I surrounded the cover with a tiny earthen dam and poured 2 litres of hot water into it to protect it.
  • Amazing.
  • strain on a 4′ wire with 500 pounds of force Woof!
  • Wouldn’t it depend on the composition of the cable?
  • There isn’t much.

Site Timeline

  • It’s possible that garages will need to be rearranged in order to accommodate this device. It has an IC
  • It was last updated in
  • It has an IC.

Home Repair

Septic systems employ a concrete cap to limit the infiltration of smells and sewage into the surrounding soil. Every five years, the lid must be removed in order for the septic system to be emptied out and the tank to be cleaned. When concrete septic tank covers become cracked or damaged in any way, they must be replaced immediately. Purchases of this nature can be made online or at a home improvement store in your area. Many septic tanks are equipped with risers, which allow the lid to be seen above ground.

Make arrangements with the utility companies to come out and mark the position of electricity and water lines before beginning work on a concrete septic lid replacement.

How to Replace a Concrete Septic Lid (with Pictures) Image courtesy of creatingmore/E+/

Dig Down to the Septic Lid

Spade or shovel the dirt around the concrete septic lid until you reach the septic tank lid, and then remove the septic tank lid. Septic tanks are typically located 12 to 14 inches below the surface of the earth. In order to have enough area to work when taking the septic tank top off the septic tank, it is preferable if you dig a perimeter around it that is 16 inches wide.

It’s also a good idea to dig 2 inches past the seam where the lid and tank come together. If your lid is mounted on a riser, there is no need to poke around underneath.

Lift Off the Lid

A pry bar should be inserted between the top of the septic tank and the lid. Instruct your assistant to grip the handle on the top of the lid. One end of the concrete septic tank lid may be lifted up by pressing down on the pry bar. Instruct your assistant to pull the lid handle and slide the lid to the side while you work. You may need to repeat the method for the opposite end of a big rectangular lid if the lid is rectangular in shape. With the assistance of your companions, lift the septic tank lid away from the tank.

Check the seal on the top of the septic tank for damage.

Measure the Lid

Using a tape measure, measure the length and breadth of the aperture to your septic tank chamber. Purchase a replacement sewer cover from Home Depot or another supplier depending on the measurements you’ve taken thus far. The old lid should be placed back on top of the septic tank, or the tank entrance should be covered with a tarp if it will be several days until your new lid comes.

Clean the Seal

Using a putty knife, scrape away any remaining old seal from the top of the septic tank if necessary. The majority of the seal will fall out in large chunks. With a wire brush, clean the top of the tank entrance to remove any remaining traces of the seal as well as any loose concrete.

Install the New Lid

One end of the new septic tank lid should be lifted while the other end is lifted by your assistant. Lower the concrete lid over the septic tank with care, ensuring that the seal between the tank and the lid is compressed. If you have to dig to get to the septic tank, you should cover it with the earth.

Septic Tank Repair Atlanta GA – Septic System Repair Near Me

Septic tank or system failure is the last thing that any homeowner or business owner wants to deal with on a daily basis. It does, however, happen from time to time, which is regrettable. It is important to know that the crew you call will be prepared to give you with the highest quality septic tank repair Atlanta has to offer when the time comes. This necessitates contacting Septic Masters. We service and repair septic systems across the Metro region, and you will not find a more dedicated or better-informed customer care team anywhere else in town.

Septic Tank Repair Atlanta GA

All aspects of your septic system, including the pump and drain field, may be repaired by our team of experts at Septic Masters. We recognize that the health of your entire home is dependent on the operation of your septic system. As a matter of fact, we believe it is the very last thing you need be concerned about. Nonetheless, if you are experiencing difficulties, we want to make certain that the situation is rectified as quickly as possible. Some of the warning indications that your septic system is malfunctioning are as follows:

  • If you have sewage backing up inside your home, call an emergency plumber. In your yard, there is a pool of water, particularly near where the septic tank is located
  • A rotten egg stench, whether inside or outside your home
  • There is more sponginess in the grass surrounding the tank compared to the rest of the yard. drainage that is slow or sluggish

In the event that you detect any of these problems, there is no need to be alarmed.

Septic Masters provides excellent septic servicing, pumping, and repair, and we are always here to assist you with your needs.

Septic Tank Repair Near Me

Do not put off septic system repairs any longer than absolutely necessary. Emergency service is available 24 hours a day, seven days a week throughout Atlanta and the surrounding metro region. This includes Gwinnett and Hall counties, Barrow and Forsyth counties, and other nearby counties. Contact our professionals immediately to benefit from a first-class client experience as well as the septic system repairs that you require.

Replacing Your Septic Tank Access Cover

The entrance cover for your septic system may appear to be an inconsequential element of the jigsaw, but it is critical to keeping your waste confined. Therefore, it is critical to understand when, why, and how you should replace your septic tank access cover in order to avoid costly repairs. Let’s take a deeper look at what’s going on.

When Should You Replace Your Septic Tank Access Cover?

Septic tank lids serve two functions: they prevent sewage from spilling into the tank and they prevent objects from falling into the tank. They are made of plastic or metal. Because the access cover for your septic tank is visible, it is critical that your septic tank lid be solid, durable, and correctly affixed to the tank, especially if your tank is on risers. Small animals and even children can become entangled if this is not prevented. As an added precautionary measure, leaks or breaks in the lid of your septic tank can cause an overflow of wastewater or sewage onto your yard, posing health dangers and creating an unsightly messe.

Additionally, bear in mind that your tank may be overflowing as a result of an overdue pumping session.

How to Replace Your Septic Tank Access Cover

So, how do you go about replacing a septic tank lid that has damaged or is leaking? Take the actions outlined below.

Locate your septic tank lid.

If your septic tank’s lid is on risers or if you have already had your septic tank pumped, this step is straightforward because you already know where your septic tank is located. When it comes to finding your septic tank if it is buried someplace in your yard and cannot be discovered, the task becomes a little more difficult to do. First, try contacting the folks who previously owned the land where you live. If you can’t get in touch with them, you might look for your property’s papers at the local health department.

You may either use a metal detector (and hope that the lid is made of metal!) or track the drain pipes that go away from your house if none of the other methods are successful.

Wait for the trail to come to an end, then probe about until you come upon the septic tank cover.

Fortunately, you only have to go through this process once!

Determine what type of access cover you need for the replacement.

Always keep in mind that septic tank lids are available in a number of materials, which means that they vary in terms of both durability and cost. Despite the fact that concrete is reasonably inexpensive and surely durable, it is difficult to remove for routine maintenance and septic tank pumping. PVC or polyethylene covers, on the other hand, are more expensive, but they offer a greater degree of ease.

Lids made of metal or fiberglass are also available. In addition to personal preferences, consider variables such as the placement of the septic tank, the amount of weight that will be placed on it, and so on.

Measure the current access cover.

Be sure to carefully measure the previous lid before making your final purchase to guarantee that you obtain the right size lid. The majority of lids are between 21″ and 25″ in height.

If the lid is not on risers, use a shovel to dig around it.

Remove the soil from the top of the septic tank and use a shovel to loosen the corners of the lid so that you can easily remove it. Remove the soil from the bottom of the septic tank.

Lift the old lid off the tank.

This phase might be simple or complex, depending on the sort of lid you’re working with. For a heavier lid, such as one constructed of concrete, you will almost certainly want the assistance of another pair of hands. If the lid is constructed of a lighter material with fasteners, carefully remove the bindings and pull it out of the way. Make sure that any children or pets are kept inside throughout the replacement procedure to avoid anyone falling in during the operation. Watch your own feet, as well.

Install the new one using the existing fasteners.

Once you have removed the old, leaking lid, carefully replace it with the new one, making sure that it is aligned with the rest of the container and that it fits tightly.

Re-bury the lid, or ensure its security if it is on risers.

Once you’re finished, either set the soil back on top of the lid or tighten the cover to ensure it’s snug and secure.

How Can Norway Septic Help?

Located in Norway, Indiana, Norway Septic Inc. is a customer-focused company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to homes and business owners in the Michiana area. We take great delight in finishing the task that others have left unfinished. For more information on purchasing a new effluent filter or scheduling a septic tank cleaning with one of our specialists, please contact us right now.

Leave a Comment

Your email address will not be published. Required fields are marked *