How to find out if my house has a septic tank?
- Inspect your property carefully. Some septic tanks,especially if you live in a mobile home,are easy to spot because they are accompanied by a large,rectangular or
- Consider the location of your home. Sewer systems are not cheap,and the area has to have enough homes to support the system’s maintenance.
- Check your bills. Sewer systems are not free,so if your house is attached to a community sewer system,you can expect to be getting bills from it.
- Get a copy of the records for your property from your municipal government.
Are septic tank locations public record?
Contact your local health department for public records. These permits should come with a diagram of the location where the septic system is buried. Depending on the age of your septic system, you may be able to find information regarding the location of your septic system by making a public records request.
How do I know if my house has a septic tank?
A surefire way to confirm whether or not your home has a septic system is to check your property records. It is likely that the building permit and blueprints for your home and property will contain information about the presence (or lack) of a septic tank.
How do I find out if my septic tank is registered?
Check if your septic tank is already registered You can check if your tank has already been registered by contacting your environmental regulator. If you are unsure then it is best to check and avoid making an unnecessary payment. The NIEA and SEPA have records of all registered septic tanks.
What do lateral lines look like?
Lateral lines are usually visible as faint lines of pores running lengthwise down each side, from the vicinity of the gill covers to the base of the tail. Most amphibian larvae and some fully aquatic adult amphibians possess mechanosensitive systems comparable to the lateral line.
How do I know if my leach field is failing?
The following are a few common signs of leach field failure: Grass over leach field is greener than the rest of the yard. The surrounding area is wet, mushy, or even has standing water. Sewage odors around drains, tank, or leach field.
Will metal detector find septic tank?
If it’s Concrete or Steel, Use a Metal Detector. Based on your conclusions in Step 3, if your septic tank is likely made from concrete or steel, a metal detector can make the task of locating it much easier. But not just any metal detector will do.
How do you find a septic tank in an old house?
Look for the 4-inch sewer that exits the crawl space or basement, and locate the same spot outside the home. Septic tanks are usually located between ten to 25 feet away from the home. Insert a thin metal probe into the ground every few feet, until you strike polyethylene, fiberglass or flat concrete.
How long do septic tanks last?
A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.
Are septic tanks still legal?
Septic Tanks Explained… Septic tanks cannot discharge to surface water drains, rivers, canals, ditches, streams or any other type of waterway. you are required to upgrade or replace your septic tank treatment system to a full sewage treatment plant by 2020, or when you sell a property, if it’s prior to this date.
Do I need a certificate for my septic tank?
The General Binding Rules were designed to simplify the regulation of small sewage discharges. Septic tanks and small sewage treatment plants no longer need to be registered and there is no legal requirement to keep records of maintenance (although this is advisable).
Do I need consent to discharge septic tank?
You will require a ‘Permit to Discharge’, however you may qualify for an exempt status if your system meets certain requirements such as amount of discharge, septic tank or sewage treatment plant model (only EN 12566-3 2005 Certified plants accepted), plant location, intended discharge point, installation and
How to Find My Septic Tank Lines
Credit: Petegar/E+/Getty Images for the image
In This Article
- Septic System Fundamentals
- Identifying and Locating a Septic Tank on Your Property
- Conducting Regular Inspections
- Checking for Clean-Outs
- Identifying Natural Indicators
- Viewing System Diagrams
- Seek Professional Assistance
- Check the distribution box
- Understand the size and scope of the project.
Are you curious about the location of your septic lines? It is critical to know where the septic tank is located on a property in order to properly manage and preserve the system. For example, you don’t want to pave over the ground or grow trees too close together in a forest. It is possible to obtain a copy of the septic tank diagram of the drain field, which will give you a fair sense of where the pipes will go. If this is not the case, you may need to attempt some other methods of locating septic drain lines.
The solids and liquids are separated within the tank by a baffle or wall that is built inside the tank.
When pipes get clogged or when drain fields become too saturated with fluids, problems arise.
Locating a Septic Tank on Your Property
Begin your search for the septic tank lines at the residence first. Drain lines from the home’s plumbing should be traced to the septic tank, which is typically located 10 to 20 feet from the home’s exterior. The drain line connects the tank’s end, which is located opposite the house, to the leach field. Check the natural slope of the ground to see whether the leach field may be found there. It is never a good idea to look for drain lines using heavy gear, wrecking bars, or jackhammers. Before excavating, contact your local electric utility provider or gas company to determine the location of underground gas or utility lines.
Plunge the long, thin metal probe into the earth until you can feel it strike the tank and feel the tank’s edges.
Perform Regular Inspection
According to industry experts, you should examine your septic tanks and, if required, pump them out once every three years. If you are experiencing gurgling sounds in your house or water backing up after your system has been repaired, a saturated drain field might be the source of the problem. Drain fields that have been clogged or damaged are unable to be rectified. In order for the septic system to function properly again, you’ll need to have a new drain field installed. Find capped clean-outs that are a few inches vertically above the ground in the leach field itself, or check behind a wall or in a closet in the basement for capped clean-outs.
- You can visually trace the orientation of the pipe from the clean-out if there is no other information available.
- Credit: Kyryl Gorlov/iStock/Getty Images for the image.
- When you are looking for the lines, look for grass or vegetation that greens in stripes when the grass surrounding it browns.
- Putting hot water into your system might cause snow or ice to melt above the drain pipes if the system is not properly insulated.
- If you have a deep system, as is the case for homes with basements, you will most likely not be able to observe natural signs since the drain field is too deep to be seen from above.
- Unless the system was built without a permit, the blueprints or designs for septic system installations are kept on file with the local health authority until the system is operational.
- If your search does not provide any relevant results, you can request a record search based on your street address or the tax account number associated with the property.
- If the agency has a copy of the record, they will mail it to you.
- If you don’t have a drawing of the septic system, you need enlist the assistance of a disposal system contractor or a certified liquid waste transporter to find it.
Another option is to purchase a flushable transmitter from a plumbing or rental business, or you may contract with a tank cleaning firm. The signal from the transmitter is picked up by a hand-held receiver after it has been flushed down the toilet.
Check the Distribution Box
There are certain septic tanks that feature an extra distribution box that is located a few feet from the tank on the tank’s downstream side. Water is channeled into the trenches by ports and pipes in the box. It is recommended that, if your system includes a distribution box, the box’s top be designed to expose the orientation of the ports that connect to the drain field lines. It is feasible to locate the box with a probe, but extreme caution should be exercised. Avoid applying excessive force to the probe, since this may result in damage to the box.
In most cases, individual drain lines run perpendicular to the intake line, but they may also branch into an H-pattern or other patterns that are appropriate for the terrain.
Find the location of your septic drain lines so that you can safeguard the area in and around them with a little detective work.
How to locate your septic tank and your drainfield
Septic systems on-site are used for accepting and treating wastewater in homes that are not linked to the municipal wastewater management system. A septic system is comprised of three components: a septic tank, a drain field, and piping. As a homeowner, it is your responsibility to properly operate and maintain your septic system in order to avoid system failure. For example, depending on the legislation in your area, you may be compelled to pump it on a regular basis. It is impossible to perform maintenance operations, however, if you do not know where the tank is located.
Steps to follow to locate your septic tank and drain field
The contractor that designed and constructed the septic tank on your property should have submitted an as-built diagram with the local health authority before starting work on the project. In the event that you have the contractor’s contact information, you can ask them for a schematic, which you can then use to pinpoint the location of your septic tank. If you do not have a copy of the schematic, you can request one from the local authorities. Depending on whether the installed system included electrical components, the schematic may be available at the regional building department offices.
- If you are unable to locate the tank using this diagram, you will need to do more research on the land in order to determine its position.
- This pipe is commonly found in the basement of a home, and it is a 4″ black pipe with a cleanout at the bottom.
- Simply look for possible access coverings or a structure that might be concealing it.
- These pumps are used to remove waste from the building.
Having discovered it, flush a toilet and listen to the pump to determine where the sewage is being discharged. It is supposed to be connected to the sewage output pipe. You should now be able to see the general orientation of the septic tank and drain field from this point.
As soon as you’ve discovered the sewer outlet in your basement, you may use it to figure out where the sewer line departs your home through an outside wall. The septic tank will be located a few meters away from the home, and the outflow pipe may be at an angle of 30 or 45 degrees from the house. As a result, it is probable that the tank will be positioned around the corner from the building. Work your way around the home in a circle, starting at an electrical outlet and continuing until you find the septic tank.
Tips for locating your septic tank
Septic tank lids should be visible from the outside. An underground riser may have been added, which will make it simple to find your septic tank in some instances. However, it is conceivable that the septic tank cover is buried underground, which is especially true for older homes. Following are some pointers to assist you in locating the septic tank in this and other similar situations.
- It may be possible to discover the septic tank lid underneath using a metal detector if it is buried. Prevent wearing footwear that contains steel or any other metal in order to avoid interfering with the readings of the detector
- Instead, you can use a flushable transmitter that is flushed down the toilet and then tracked with a receiver. When it comes to septic tanks, the strongest signal will be seen close to the intake region of the tank.
Depending on whether the septic tank is above or below ground, you may have to dig to get to it. Construction materials for septic tanks include concrete, fiberglass, or plastic, and their shapes can range from oblong to cylindrical to rectangular. The majority of modern septic tanks will have their lids positioned in the center of the tank, and the lid should be within three feet of the ground surface in most cases. However, depending on a variety of conditions, such as farming and other human activities on the property, it is conceivable that it will be significantly deeper.
Additionally, you may use a small steel rod to probe the earth in order to pinpoint exactly where the tank is located as you continue digging.
Inspecting the tank
It is critical to thoroughly inspect and evaluate your septic tank and its contents when it has been identified. First and foremost, you may unscrew the lid to inspect the scum and sludge layer beneath it. In addition, the use of tracer dye tablets allows you to check the septic tank without having to dig it up. If you use tracer dye pills, all you have to do is flush them down the toilet and wait for a maximum of two days. Because of the way the tablets dissolve in water, if there is a problem with the septic system, you will see that the leach field has a glowing green hue surrounding it.
It is possible that someone will fall into the tank, causing significant damage or possibly death.
You can identify your septic tank without assistance from a professional, but it is a good idea to have someone who is properly educated in septic tank maintenance examine and maintain your septic tank on your behalf. The effluent filter in your tank should be washed into the open septic tank rather than on the ground in your yard if your tank has one. It may also be a good idea to make a note of the position of the septic tank when it has been discovered. This will be beneficial to anyone else who may require access to the septic tank in the future.
Septic tanks release combustible and hazardous gases, and as a result, they must be located in an open area.
How to Locate Your Septic Tank Field Lines
Your septic tank field lines are undoubtedly present, but where exactly can you find them? They are less difficult to get by than you may assume. In this post, we’ll go through what to look for in order to figure out where to seek for them. After reading this, the vast majority of people should be able to locate their system without the aid of a specialist.
Why Does it Matter?
Getting into problems with the law is easy if you’re conducting household chores and accidently damage your field lines. It is worthwhile to find your field lines if you want to save money and time in the long run. The following types of work can harm your lines: any form of paving, driving and parking heavy equipment, planting shrubs or trees, and landscaping are just a few examples. Even the smallest omission can result in financial losses of hundreds or thousands of dollars.
Who Should Look for the Lines?
Locating the field lines for your septic tank is a very simple procedure. There is no unique training or skill set necessary for this position. In other circumstances, it may be impossible to locate the lines on your own, and you may need to seek expert assistance. In the majority of circumstances, anybody may search for the lines. You, too, can succeed with a little assistance from this essay. More information may be found at:
- How to Select and Use the Most Effective Septic Tank Treatment (Top 3 Reviews)
- 5 Different Types of Residential Septic Systems (and the Advantages and Disadvantages of Each) Home Remedies for a Clogged Septic Tank (Also Including Maintenance Suggestions)
How to Locate Your Septic Tank Field Lines
Choosing the Best Treatment for Septic Tanks (Based on the Top 3 Reviews); There are five different types of residential septic systems, each with its own set of advantages and disadvantages. Home Remedies for a Clogged Septic Tank (Also Including Maintenance Instructions)
Find the Drawings
Reaching out to your local health agency is the most reliable means of locating your septic tankfield lines. It is their policy to keep a dossier on every septic system that has been installed with a permit. Of course, if your system was not constructed with a permit, you will not be successful in this endeavor. It will be possible to see the layout, position, and every aspect of your drain field thanks to the drawings. Typically, they will mail you the drawings that you have requested. You can also get in touch with the contractor who did the septic system installation or the former owner of the house for further information.
The Grass is Much Greener…
It is expected that your drain field would absorb up nutrients and water from the surrounding soil. In other words, your drain field will be a lot greener and healthier piece of grass than the rest of the surrounding landscape. The type of cues you use to locate your drain field will be determined by your climate.
If you live in a frigid region, wait until the morning when it is snowing or ice. It’s possible that your drain field will be the first to melt.
Because of the warmer environment, it is easy to locate the drain field.
For a few days, refrain from watering your yard. With the exception of your drain field, you’ll observe that the majority of the grass begins to wither.
Check for Ports
A large number of septic systems are equipped with monitoring ports and clean-outs. These ports will be white tubes or pipes with a cap on them that will protrude from the ground in your yard. These apertures allow the homeowner to monitor the amount of water in the drain field without having to dig up the drain field. For you, it serves as an indication of the exact location of your drain field! Because these ports are often cut quite near to the ground, it may take some research to locate them.
These ports will direct you to the correct location.
Check Google Maps
You might be able to locate your septic tank field lines using satellites if you live in certain areas. Consider the following example: when we look at our home from a satellite view on Google Maps, we can clearly see where our drain field is located. Parallel lines, darker grass, and small depressions are all things you could notice. Using this zoomed-out, bird’s eye perspective, you will be able to inspect the area for anomalies.
Consult a Professional
You want to avoid wasting time and money, but there are occasions when consulting with a professional is the best course of action. Identifying your lines will be more difficult if they are hidden between the rocks of a rough terrain. Echolocators can be brought in by the professionals to pinpoint the exact placement of your field lines. Depending on the reason you’re seeking for your field lines, they may also be able to assist you with other chores.
Check the Distribution Box
Distribution boxes are the parts of the system that come before the drainage lines. That is to say, if you can locate the distribution box, you will be one step closer to locating your field line connections. Begin your search a few feet downstream from where your septic tank is located (assuming you know where that is). Remove a lid if you find one that can be removed. It is through this cover that you may have access to the ports and pipes of the distribution box. This implies that simply lifting the lid, you will be able to see your drain lines in their actual form.
Use Your Septic Tank
Knowing where your septic tank is, you can use a little intuition to locate your drain field if you know where it is. Our post on how to locate your septic tank can be found by clicking here. The most crucial thing to remember about your output port is that it is parallel to your intake port. The output port will, to a greater or lesser extent, orient you in the direction of your field line. At the very least, it will assist you in locating your distribution box, which will direct you to the field lines.
Check for Moisture
In general, your drain field should be swampier and wetter than the grass in the immediate vicinity. It will be a bit easier for you to look around as a result of this. If your lawn’s color is consistent and it’s difficult to distinguish between different areas, it’s time to bring in the heavy guns! Wait until a very challenging day before grabbing a stick or rod. Now, walk around your yard, poking your grass in various locations as you go.
Where the earth yields more and is more moist is what you’re searching for. Certainly, your neighbors will think you’re insane – but at the very least, you’ll know where your drain field is! Caution should be exercised when poking, since this might result in damage to your lines.
Understand the Size of Your Field
The size of your drain field will be determined by the amount of water you use and the size of your property. When you’re searching for anything, it’s frequently beneficial to keep in mind how broad your field is. It’s possible that huge area of green grass in the distance is your drain field.
You Might Also Like…
The majority of individuals prefer to relax on their back patio or porch and take in the scenery rather than worrying about where their septic tank could be. When you know exactly where your septic tank is, it will be much easier to schedule routine sewer line cleanouts and repair appointments. Continue reading to find out more about how to locate your septic tank.
Follow the Main Sewer Line
Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your property. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about down there. Look for a pipe with a diameter of around four inches that is leading away from your home or building. Keep a note of the position of the sewer pipe and the point at which the line exits your home so that you can locate it outdoors.
If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your home.
Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may have to probe a bit further out before striking the tank.
Inspect Your Property
Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your yard. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about in it. Look for a pipe with a diameter of around four inches that is leading away from your home or business. Recall where your sewer pipe is located, as well as where it exits your home, in order to locate it while you are out in the field.
If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your house.
Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may need to probe a bit further out before striking the tank.
- Paved surfaces
- Unique landscaping
- Your water well, if you have one
- And other features.
If you are still having trouble locating your septic system, you might inquire of your neighbors about the location of their septic tank on their land. Finding out how far away their septic systems are will help you figure out where yours might be hidden in your yard or garden.
Check the Property Records
Are you unsure about how to obtain this? Simply contact your county’s health department for further information. Check with your local health agency to see if they have a property survey map and a septic tank map that you can borrow. Perhaps you will be shocked to learn that there are a variety of options to obtain information about your property without ever leaving the comfort of your own residence. Building permits, for example, are frequently found in county records, and they may provide schematics with specifications on how far away from a septic tank a home should be, as well as other important information such as the size of the tank.
Most counties, on the other hand, keep records of septic tank installations for every address. For further information on the placement of your septic tank, you can consult your home inspection documents or the deed to the property.
Don’t Try to Fix Septic Tank Issues Yourself
Septic tank problems should be left to the specialists. The Original Plumber can do routine maintenance on your septic tank and examine any problems you may have once you’ve located the tank. It is not recommended to open the septic tank lid since poisonous vapors might cause major health problems. Getting trapped in an open septic tank might result in serious injury or death. While it is beneficial to know where your septic tank is located, it is also beneficial to be aware of the potential health dangers associated with opening the tank.
Schedule Septic Tank Maintenance
The maintenance of your septic tank on a regular basis helps to avoid sewer backups and costly repairs to your sewer system. You should plan to have your septic tank pumped out every three to five years, depending on the size of your tank and the number of people that reside in your home. The Original Plumber offers skilled septic tank and drain field maintenance and repair services at competitive prices. While it is useful to know where the septic tank is located, it is not required. Our team of skilled plumbers is equipped with all of the tools and equipment necessary to locate your tank, even if you have a vast property.
We are open seven days a week, twenty-four hours a day.
Frequently Asked Questions
A septic system is a system for the management of wastewater. Simply said, wastewater will exit your home through pipes until it reaches your septic tank, which is located outside your home. Septic tanks are normally located beneath the surface of the earth. Solids and liquids will separate in the septic tank as a result of the separation process. Eventually, the solids will fall to the bottom of the tank and the liquids will run out onto your leach field.
How do I know if I have a septic tank?
Even if there are no obvious signs of a septic tank in your yard – such as uneven landscaping – there are a few techniques to assess whether or not your home is equipped with an onsite sewage system. Checking your property records is the most reliable technique to ensure that you are utilizing the correct system. When you acquired your house, you should have received a copy of the septic system map with the property documents as well. Checking your electricity statement is another way to determine this.
If you’re also using well water, it’s possible that you won’t receive one at all.
What do I do once I locate my septic tank?
Once you’ve discovered where your septic tank is, there are a few things you should do. It is critical to clearly mark the position of your septic tank. With our inspection, pumping, and repair services, you can save time whether you need a sewer line cleanout or a septic tank maintenance job completed quickly. Make a note of the location of your tank so that you can find it again if necessary. It should be heavy enough so that it does not fly away in windy conditions. A creative approach to accomplish this without having an unattractive flag or marking in your yard is to use garden décor or a potted plant.
This way, you’ll have it for future reference and will be able to quickly locate the exact position if necessary.
Then contact The Original Plumber to have your septic system maintained on a regular basis. Preventing worse problems and the need for costly repairs down the line may be accomplished via proper septic system maintenance. All of the heavy lifting has been delegated to our team of professionals.
How Can I Find My Drainfield?
It’s not always simple to find your septic system’s drainfield, but there are three things you can do to make the work a little bit easier.
- Take a look around your yard. In spite of the fact that it is usual for there to be no indicators of the drainfield’s presence, search for lines of green grass, dead grass, or depressed regions. These might be indicators of the location of your drainfield. Check with the permitting authorities (typically the county), the installer, or the designer to see if they have any septic records. A word of caution: septic system designs are not usually correct. Check your yard for gravel by digging about in it. Because your drainfield’s pipes are buried in gravel, it aids in the wastewater treatment process
- Therefore, locating gravel may indicate that you have located your drainfield. Be warned that in locations where the native soil is hard or rocky to probe into, this may be difficult to do.
Why do I need to know where my drainfield is?
However, while we tend to focus on the tank portion of a septic system, it is actually the drainfield that is the most significant component – it is here that the majority of the treatment takes place. If you don’t know where your drainfield is, you won’t be able to textend the life of your drainfield. If you do any of the following, you risk damaging the lines by accident:
- Drove over them — Driving a car or heavy equipment over the lines has the potential to destroy them. Build over them — House extensions, sheds, pools, driveways, and other structures can cause damage to underground utility wires, making it more difficult to reach them for repairs. Plantings in the vicinity of or above them –Trees and septic systems are not a good combination. Roots that have invaded the line might cause harm.
Interested in learning more about how your septic system works and what you can do to maintain it in good working order? Download our free booklet, Understanding and Maintaining Your Septic System, to learn more about this topic. Over the course of 80 years, Van Delden Wastewater Systems has proven itself to be the premier Wastewater System provider, supplying San Antonio, Boerne, and the surrounding Texas Hill Country with services you can rely on today and in the future. We can assist you with any of your wastewater system needs, and our specialists can also assist you with your septic installation and maintenance requirements: 210.698.2000 (San Antonio) or 830.249.4000 (Austin) (Boerne).
How to Locate Your Drain Field
Homeownership entails a large number of duties. Making repairs to the house, keeping the lawns, caring for the landscaping, paying all kind of bills and taxes, and a slew of other responsibilities are required. But it’s all worth it when you finally get to purchase your own house. Consider the following scenario: you have acquired a home in Modesto, CA that has a septic tank installation. Regardless of whether you are familiar with septic systems or not, you must be aware of the location of the tank and drain field.
In light of this, we would like to provide you with some expert guidance to assist you in locating your drain field.
A few sewage system pipe routes are easy to identify in the yard, while others are more difficult to locate.
- First, take a look around your yard. It’s typical for you to not notice any indicators of your drain field’s presence at first sight. For starters, go around your yard, checking for lines of green grass, dead grass, and sunk-in regions (front, rear, and sides). If you see any of them, go ahead and investigate since these are indications of a drain field installation. Examine the surrounding region for markers: Ideally, a cement marker the size of a manhole cover should be used to indicate the position of your septic tank. Try to find it between 10 and 20 feet away from your house. As soon as you’ve located the tank, head down the steepest slope and look for an empty downward-sloping field to hide in. It’s possible that you’ve just discovered your drain field. Check your yard for gravel by doing the following: Another option is to probe your yard and feel for gravel, because drain field lines are covered in gravel as a manner of guiding wastewater through the treatment process and are therefore difficult to detect. If you come across gravel, you may have discovered your property’s drain field. Please be aware that probing may be difficult in regions where the soil is hard or rocky
- Thus, caution is advised. Examine the county’s records: A copy of your property’s septic records may be on file with your county’s permits department or with the business that built the septic system in its first place. Read the notes left by past owners: Another option is to inquire with the former owners about the location of the drain field. Even if this isn’t possible, look in the garage, cupboards, and bathroom areas for notes or instruction manuals that may have been left for you by the previous residents. When people are preparing to move, they may gather all of the owners’ manuals or write out their own notes on how to use and maintain specific appliances or systems in the house, as well as important information about the products (age, maintenance records, and so on). There’s also a chance that they’ve sketched out the location of the drain field. Request information from neighbors:You should make yourself known to your immediate neighbors as soon as possible after moving into your new house. This is an excellent moment to inquire as to whether or not they are aware of the location of your drain field.
Alvarado Pumping Septic Service is the company to call in Modesto, California, for the best septic maintenance, drain field services, and septic tank installation you can find. Our septic system professionals are here to assist you at any time with your house or business’ septic system!
How To Find My Septic Tank
- What is a septic tank
- How do I know if I have a septic tank
- And how do I know if I have a septic tank Identifying the location of your septic tank is critical for several reasons. The Best Way to Find a Septic Tank
- What to Do Once You’ve Discovered Your Septic Tank
You may have fallen in love with your new house because of its appealing good looks and characteristics, but there is almost certainly more to your new home than meets the eye. In many cases, the characteristics that make your house run more effectively and allow you to live a pleasant, contemporary life are not readily apparent. Septic tanks, for example, are an important part of your home’s infrastructure. A septic system is responsible for regulating and managing the wastewater generated by your home.
“How can I locate my septic tank?” is one of the most often requested inquiries we receive.
When your tank’s lid is difficult to locate – especially if you are not the original homeowner – you may be at a loss for what to do or where to look for the lid when you need it.
The majority of the time, all of the components of the septic tank are buried between four inches and four feet below ground level.
In order to do so, it is necessary to first comprehend the functions of septic tanks and septic systems and why it is important to know where yours is located.
How to Locate Your Septic Tank
Your septic tank’s location is not a closely guarded secret. There will be a method for you to locate it and make a note of its position for future reference, and below are a few examples of such methods.
What Is a Septic Tank?
Having a functioning septic tank is an important aspect of having an effective septic system. In the United States, around 20% of households utilize a septic system to handle their wastewater. Houses in rural parts of New England are the most likely to have a septic system, with residences in the Eastern United States being the most prevalent location for septic systems. When there are few and far between residences, it is typically more efficient and cost-effective to employ a septic system to manage wastewater rather than relying on a public sewage system to handle waste water.
- Typically, a septic tank is a container that is waterproof and composed of a material such as concrete, polyethylene, fiberglass, or a combination of these.
- An important function of a septic tank is to hold on to wastewater until any particulates in the water separate themselves from the water.
- Any liquid that remains in the tank eventually drains into a leach field or a drainfield, where it is known as “effluent.” The dirt in the leach field aids in the filtering of the water and the removal of bacteria, viruses, and other pollutants that may be present in it.
- Septic tanks erected in Onondaga County must contain input and outlet baffles, as well as an effluent filter or sanitary tees, in order to effectively separate particles from liquids during the treatment process.
How Do I Know If I Have a Septic Tank?
Having a functioning septic tank is an important aspect of maintaining an effective septic system. A septic system is used to handle wastewater in around 20% of residences in the United States. Houses in rural parts of New England are the most likely to have a septic system, with residences in the eastern United States being the most prevalent location for septic systems. When there are few and far between residences, it is typically more efficient and cost-effective to employ a septic system to manage wastewater rather than relying on a public sewage system to handle waste water management.
Typically, a septic tank is a container that is waterproof and composed of a material such as concrete, polyethylene, fiberglass, or any combination of these materials.
The purpose of a septic tank is to hold on to wastewater until any particles in the water separate from the water and disappear.
Any liquid that remains in the tank eventually drains into a leach field or a drainfield, where it becomes known as “effluent.” The soil in the leach field aids in the filtering of the water and the removal of bacteria, viruses, and other contaminants that may have gotten into the system.
For septic tanks installed in Onondaga County, baffles, an effluent filter, or sanitary tees must be installed to separate solids from liquids at the inlet and outlet baffles.
Why It’s Important to Know the Location of Your Septic Tank
You might wonder why you should bother trying to discover out where your septic tank is. There are several important reasons for this:
1. To Be Able to Care for It Properly
The first reason you should try to locate your septic tank is that knowing where it is will help you to properly repair and care for it in the future. The standard guideline is to avoid erecting structures or placing heavy objects on top of the septic tank. It’s possible that you don’t want to park your car or truck on top of it, and you don’t want visitors to your house to park their cars on top of it, either. Due to the weight of the automobiles, there is a possibility that the tank would collapse due to excessive pressure.
2. If You Want to Landscape or Remodel Your Property
Identifying your septic tank is important for several reasons. For starters, knowing where your tank is helps you to provide correct maintenance and care for it. Building or putting heavy things on top of a septic tank is generally not recommended, as it might cause damage. It’s possible that you don’t want to park your car or truck on top of it, and you don’t want visitors to your house to park their cars on top of it as well. Due to the weight of the automobiles, there is a risk that the tank would collapse due to excessive pressure.
3. If a Problem With Your Tank Occurs
Knowing where your tank is buried might also assist you in identifying problems as soon as they arise. Consider the following scenario: you wake up one morning and see that there is flooding or ponding water in the region surrounding your septic tank – a sign that your system is overwhelmed and that an excessive amount of water is being utilized all at once.
4. Ease of Getting It Fixed
Once you have determined the location of your sewer system, you can quickly send a plumber to it in the event that something goes wrong with the system, saving everyone both time and money. Get in Touch With A Plumber Right Away
1. Use a Septic Tank Map
Once you have determined the location of your sewer system, you can quickly direct a plumber to the tank if an issue arises, saving both time and money for everyone involved. Immediately Contact a Plumber
2. Follow the Pipes to Find Your Septic Tank
Whether or not there is an existing map of your septic tank on file, or whether or not you choose to develop one for future reference or for future homeowners, you will still need to track down and find the tank. One method of accomplishing this is to follow the sewer lines that lead away from your residence. The septic tank is situated along the sewage line that goes from your home and into the yard, as we’re sure you’re aware. Find a four-inch sewer pipe in your basement or crawl space. This is the line that will lead to your septic system and should be accessible from the ground level.
- In general, though, you’re searching for a pipe with a diameter of four inches or more that leaves your home via a basement wall or ceiling.
- By inserting a thin metal probe (also known as a soil probe) into the earth near the sewage line, you can track the pipe’s location.
- The majority of septic tanks are located between 10 and 25 feet away from your home, and they cannot be any closer than five feet.
- Going via the sewage line itself is another method of locating the septic tank utilizing it.
- Drain snakes are typically used to unclog clogs in toilets and drains, and they may be used to do the same thing.
- When the snake comes to a complete halt, it has almost certainly reached the tank.
- While drawing the snake back, make a note of how far it has been extended and whether it has made any bends or turns.
- When looking for your septic tank, you may use a transmitter that you flush down the toilet and it will direct you straight to the tank.
If you only want to keep an eye on the condition of your tank and don’t need to dig it up and inspect it, you may thread a pipe camera into the sewer pipe to see what’s happening.
3. Inspect Your Yard
Septic tanks are designed to be as unobtrusive as possible when they are erected. With the passage of time, and the growth of the grass, it might be difficult to discern the visual indications that indicated the exact location of your septic tank’s installation. However, this does not rule out the possibility of finding evidence that will take you to the location of your septic tank in the future. First and foremost, you want to rule out any potential locations for your septic tank, such as:
- Under a road or similar paved surface, for example. Right up against the house (the tank must be at least five feet away)
- Directly in front of the home Immediately adjacent to your well (if you have one)
- In close proximity to trees or densely planted regions
- In the shadow of a patio, deck, or other building
Once you’ve ruled out any potential locations for your tank, it’s time to start hunting for indications as to where it may be hiding in plain sight. Keep your eyes peeled as you go about your property, looking for any inexplicable high or low points that might suggest the presence of an underground tank. When looking at your property, you could see a hill or mound on the ground, which is frequently an indication that there is a septic tank nearby. One further item to consider while searching for the right septic tank for your home is the amount of grass or other foliage in your yard.
Alternatively, if the tank was not adequately buried, you may observe a “bald patch,” which is an area where the grass is struggling to grow in the vicinity.
4. Talk to Your Neighbors
If your neighbors have septic systems as well, they may be able to assist you in locating your tank. Inquire of your neighbors about the location of their septic tanks in relation to their residences. Having a polite conversation with your neighbors regarding septic systems not only provides you with a means to figure out where yours is, but it may also serve as a friendly introduction to the other residents of your community.
5. Look for Your Septic Tank Lid
It is only the first step in the process to discover where your septic tank is located. After you’ve located your tank, the following step is to locate the lid. You can locate it with the help of your soil probe. The majority of septic tanks are rectangular in shape and measure around five feet by eight feet. The perimeter of the tank should be marked with a probe once it has been probed around. A shallow excavation with a shovel within the tank’s perimeter and near the center (or broken into halves for a two compartment tank) should show the position of the lid or lids if you are unable to feel them by probing.
The tank itself is likely to be filled with foul-smelling vapors, if not potentially hazardous ones.
What to Do After You Find Your Septic Tank
Once you’ve determined where your tank is, it’s time to bring in the specialists. Trust us when we say that opening a septic tank is not something that just anybody wants to undertake. Concrete septic tank lids are extremely heavy and must be lifted using special lifting gear in order to be removed. Since the vapors are potentially dangerous due to the contents of the tank, please respect our advice and refrain from attempting to open the tank yourself. An exposed septic tank can be hazardous to anybody wandering around your property’s perimeter, and if someone were to fall into it, it might be lethal owing to the toxicity of the sewage in the tank.
However, before you send in a team of experienced plumbers, there are a few things you can do to ensure that others do not experience the same difficulty locating the tank and to make locating the tank in the future easier.
1. Mark Its Location
The likelihood is that you will not want to post a large sign in your yard that reads “Septic Tank Here!” but you will want to leave some sort of marking so that you can quickly locate the tank and lid when you need them. In an ideal situation, the marker will be substantial enough that it will not blow away in the wind and will not be readily moved by children who are playing in the yard. A patio paver, a potted plant, or a decorative gnome or rock are just a few of the possibilities. In addition to putting a physical sign beside the septic tank, you may draw a map or layout of the area around it to illustrate its position.
2. Take Care of Your Septic Tank
Taking proper care of your tank may save you hundreds of dollars over the course of its lifetime. The expense of maintaining your system could be a few hundred dollars every few years, but that’s a lot less than the thousands of dollars it might cost to repair or replace a damaged tank or a malfunctioning septic system. Two strategies to take better care of your septic tank and system are to avoid utilizing your drain pipes or toilets as garbage cans and to use less water overall. Things like paper towels, face wipes, and cat litter should not be flushed down the toilet since they are not designed to be flushed.
In addition, installing low-flow faucets and high-efficiency toilets can help you reduce the amount of water used in your home.
For example, you don’t want to be washing load after load of laundry or running your clothes washer at the same time as your dishwasher all at the same time.
Call a Professional Plumber
Taking proper care of your tank may save you thousands of dollars over the course of its useful life span. The expense of maintaining your system could be a few hundred dollars every few years, but that’s a lot less than the thousands of dollars it might cost to repair or replace a damaged tank or a malfunctioning septic system in most cases. Two strategies to take better care of your septic tank and system are to avoid utilizing your drain pipes or toilets as garbage cans and to use less water in general.
Solid meals, cooking oil, and pharmaceuticals should not be flushed down the sink drain in your kitchen.
The usage of water-intensive equipment should be avoided wherever possible, according to another proposal.
Most likely Locations to Look
- POSTING a QUESTION OR COMMENT regarding locating the septic drainfield, soakaway bed, or leach field is encouraged.
InspectAPedia does not allow any form of conflict of interest. The sponsors, goods, and services described on this website are not affiliated with us in any way. Finding the seepage beds or leaching field using visual indicators can be accomplished as follows: What exactly should you look for while looking for the septic drainfield or soakaway bed? This article assists you in locating a septic tank, D-box, soakaway bed or drainfield, and other components by identifying sites on a construction site where such components may have been installed and should have been installed.
For this topic, we also have anARTICLE INDEX available, or you may check the top or bottom of the page. Use the SEARCH BOX to discover the information you’re looking for quickly.
Visual Clues that Indicate Drain Field Location
This article series, as well as our supporting SEPTIC COMPONENT LOCATION VIDEO, are available online. How to locate the leach field or drainfield section of a septic system is covered in detail in this video. We offer drawings and photographs to assist you in learning what to search for, as well as descriptions of numerous ways for locating underground drainfield components that are relevant in this situation. (Septic drain fields are sometimes referred to as soil absorption systems or seepage beds in some circles.) For further information, read How to Locate the Septic Tank.
- We come upon an area that, based on its size and lack of trees and rocks, is probably definitely the location of the drainfield – a fact that was subsequently confirmed by the property owner.
- Septic pumping systems will be required in this situation.
- Consider the scenario in which we have no paperwork and no knowledge where the drainfield is.
- The method is demonstrated in our video at the top of this page, which includes a site walkthrough.
- It is the septic tank outlet that determines where the effluent drain line that connects the septic tank and leach field will be located once the septic tank has been located in its entirety.
- Depending on the quantity of usage and soil qualities, there may or may not be a seepage pit present, but the septic system may appear to be operating properly anyway.
- We decided that the filled-in area in the front of our client’s property was the probable drainfield region based on the photo.
- In other words, the drain field did not have much of a life before its effluent flowed into groundwater, where it was detected by us as pink-dyed sewage in a nearby stream during our test.
- Knowing the most fundamental design factors will help you choose where to look for septic fields on a construction site based on the location of a working field that would be expected to be erected.
- A rather big and somewhat level expanse of elevated dirt or filled earth may be found on the land, which you can explore.
- A two-level or “tiered” septic mound was erected in the foreground of this photograph around 20 years ago; the bottom mound is visible in the background.
Rather than that, it was cleaning up septic effluent from the drive. If you know what to look for, you might be able to find some useful visual cues that point you in the direction of the drainfield.
Areas Cleared of Rocks and Major Trees Often Marks the Location of an Older Drainfield
Large trees and boulders are absent from this older and more mature grass, despite the fact that these objects may be found in other parts of the construction site. The septic tank and drainfield were intended to be located in this location. Leach field trenches are frequently visible as lengthy parallel depressions that run parallel to the ground. Although they are not visible in this photograph (a tank and seepage pit were discovered later), they are visible in the following portion of this article.
They may be apparent in systems that are hundreds of years old or younger.
They are about 24 to 30″ wide and many feet long, perhaps 20′ to 40′ and spaced perhaps 4′ to 6′ apart.
Areas of Snow Melt may Show Drainfield Layout, Trench Lines, Location
Drain field depressions may be easier to observe in northern regions when there is only a little layer of snow covering the ground for a handful of reasons:
- It is easier to see depressions in the snow cover since it is a smooth covering, especially in late afternoon light when the sun is low in the sky and the shadows are more visible. It is possible that trench regions will be somewhat warmer than the surrounding soil due to septic effluent running into an in-use drainfield, allowing snow to melt or to be thinner over the trenches, therefore contributing to the “depression” effect.
Wet Areas may Show a (failing) Drainfield Location
It’s a shame, but when a leaching bed or drainfield is in failure mode, the location of the leaching bed or drainfield becomes visible. If a drainfield is failing and effluent is being forced to the surface, this is a very evident indication of the field’s location. The effluent breakout most frequently happens at the low-end of the failingdrainfield line(s), although it can occur wherever that a pipe is blocked, broken, or leaking, including the sewer line itself. Even with a thick layer of snow covering the ground in this photograph, which we will examine in greater detail below, the septic system failure and, consequently, the position of the septic field were clearly visible.
- It also offers other clues that indicate where you might expect to find the drainfield for the septic system.
- The author retains the right to use this content on other websites, in books, or in pamphlets that are available for purchase.
- Continue reading at this website.
- Alternatively, read SEPTIC TANK, HOW TO FIND for further information on locating the septic tank, chamber, drywell, or seepage pit.
- More videos about septic system installation and maintenance may be found at SEPTIC VIDEOSOR have a look at these
Septic Drainfield Location Articles
- Clearance Disturbances, Septic System
- Odors, Septic or Sewer
- Locations of Septic Components
- Septic Drainfield Inspection Test at Home
- Septic Drainfield Location
- Septic Drainfield Inspection Test at Work
- LOCATION OF THE DRAINFIELD PIPE, EXACT
- EXCAVATE TO LOCATE THE DRAINFIELD
- REASONS FOR LOCATION OF THE DRAINFIELD
- Recordings to LOCATE the DRAINFIELD
- SURPRISING DRAINFIELD LOCATIONS
- UNLIKELY DRAINFIELD LOCATIONS
- VISUAL CLUES LOCATE the DRAINFIELD
- VISUAL CLUES LOCATE the SEPTIC TANK
ARE YOU LOOKING FOR SEPTIC DRAINFIELD RESTORERS?
SIZE OF THE SEPTIC DRAINFIELD DRAINFIELD SHAPE SEPTIC DRAWINGS SEPTIC DRAWINGS
Suggested citation for this web page
Inspect Apedia.com- an online encyclopedia of building and environmental inspection, testing, diagnosis, repair, and issue avoidance advice- to locate the drainfield. Alternatively, have a look at this.
INDEX to RELATED ARTICLES:ARTICLE INDEX to SEPTIC SYSTEMS
Alternatives include asking a question or searching InspectApedia using the SEARCH BOXfound below.
Ask a Question or Search InspectApedia
Questions, answers, and/or comments concerning issues relating to the functioning of aerobic septic systems are welcome. We encourage you to use the search box just below, or if you prefer, you may make a question or remark in theCommentsbox below and we will get back to you as soon as possible. InspectApedia is a website that allows you to search for things. Please keep in mind that the publication of your remark below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link.
We sincerely apologize for the inconvenience.
Citations can be shown or hidden by selecting Show or Hide Citations. InspectApedia.com is a publisher that provides references. Daniel Friedman is an American journalist and author.