How To Find My Buried Bull Run Valve For My Septic Tank? (Question)

  • In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground. You can use a metal probe to locate its edges and mark the perimeter. If you do not find the lid by probing, shallow excavation with a shovel along the tank’s perimeter should reveal the lid.

How do I find a buried septic tank lid?

You can locate the lid of your septic tank by poking the ground every few feet with a metal probe. Lids can be buried up to a foot deep on average, so be sure to investigate any bumps that may indicate something is buried underneath.

What is a septic Bull Run valve?

The Bull Run Valve is designed to split flows to septic fields or systems. The valve is designed to be buried directly in the pipe trench requiring no concrete or hold down strap installation. The valve must be installed with the septic tank effluent line connected to the valve port marked “IN”.

Are septic tank locations public record?

Contact your local health department for public records. These permits should come with a diagram of the location where the septic system is buried. Depending on the age of your septic system, you may be able to find information regarding the location of your septic system by making a public records request.

Will metal detector find septic tank?

If it’s Concrete or Steel, Use a Metal Detector. Based on your conclusions in Step 3, if your septic tank is likely made from concrete or steel, a metal detector can make the task of locating it much easier. But not just any metal detector will do.

How deep are septic tank lids?

Often, septic tank lids are at ground level. In most cases, they have buried anywhere from four inches to four feet underground.

What is a run valve?

The Bull Run Valve™ is designed to split flows to septic fields or systems. The change over from one drainage field to another can be accomplished in less than a minute by simply turning the valve without digging or contact with wastewater.

Where is the diverter valve?

It’s usually a lever that’s situated behind the bath taps that you can pull up or push down. System and conventional boilers don’t require a diverter valve. This is because the hot water they produce is stored in a hot water cylinder.

How do I find my septic distribution box?

The D-box will at or near end of the drainfield area that is closest to the septic tank. Look at the site layout for where the D-box could possibly be located. For example, if the drainfield site is level and rectangular, the D-box would typically be at or near the edge of the drainfield closest to the septic tank.

How deep is a leach field?

A standard leach line is considered to be three (3) feet wide and three (3) feet deep with a length as required.

How do I know if my house has a septic tank?

A surefire way to confirm whether or not your home has a septic system is to check your property records. It is likely that the building permit and blueprints for your home and property will contain information about the presence (or lack) of a septic tank.

How do I find out if my septic tank is registered?

Check if your septic tank is already registered You can check if your tank has already been registered by contacting your environmental regulator. If you are unsure then it is best to check and avoid making an unnecessary payment. The NIEA and SEPA have records of all registered septic tanks.

PVC 4″ Bull Run Valve with 28″ Key

It is intended to separate flows to septic fields or systems through the Bull Run Valve. In addition to the benefits of longer life and simpler installation, it is the most public health safe alternating device available for wastewater disposal applications. Because of the leak-proof design and exterior functioning features of the valve, the user has absolutely no contact with wastewater. Without excavating or coming into touch with wastewater, the transition from one drainage field to another may be completed in less than a minute by simply opening and closing the valve.

In order for the valve to function properly, the septic tank effluent line must be attached to the valve port marked “IN.” The valve ports labeled “OUT” are linked to the drainfield on each side of the valve.

The riser tube connection is a 4 way connector “Male slip connection according to schedule 40.

Any of the following methods can be used to establish a connection with the Valve.

  • This fitting is for PVC Schedule 40 pipe. PartP118-040 can be used to convert to SDR35 pipe.

FACILITATION OF THE VALVET The direction control handle should be adjusted on a regular basis in order to guide wastewater to either one of two septic fields or both. After removing the screw cap at the top of the riser tube, the valve handle can be rotated using the valve key that has been provided for this purpose.

Septic System Questions and Answers (Q&A)

THE VALVET IS RUNNING Rotating the direction control handle on the septic field should be done on a regular basis to route wastewater to one of two septic fields. The valve handle can be twisted using the valve key provided once the screw cap at the top of the riser tube has been removed.

How to Locate Your Septic Tank

It may seem impossible to imagine that one of the largest and most visible elements of your whole plumbing system is also one of the most difficult to locate, but when your property is served by a septic system, this is perfectly true. A strong explanation for this is because septic tanks are huge, unattractive, stink horrible and give off an unwarranted impression of dirt. Not only does burying them underground assist to prevent them from harm, but it also provides you with additional useable space on your property and conceals what would otherwise be a blight on your landscape.

This site is dedicated to assisting you in locating your septic system without the need for any time-consuming digging.

How To Find A Septic Tank: Step By Step

It is critical to maintain the health of your septic tank since it is responsible for securely storing and handling the wastewater that drains from your house. It is necessary to pump your septic tank once every 1-3 years, depending on the number of people living in your household and the size of your tank, in order to avoid septic tank repairs or early failure, which means you must be familiar with the location of your tank. It’s not often simple to identify your septic tank, and many plumbers charge extra for this service, which is especially true if your tank’s lid is buried beneath.

The Plumbing Experts have put out all you need to know about locating the septic tank on your property in this blog post for your convenience.

1. Gather Some Helpful Tools

Septic tank location may be made much easier with the use of several simple instruments and techniques. To locate your septic tank, you only need to know the following information: A soil probe is one of the most useful instruments for locating a septic tank. It is a tiny piece of metal that is used to puncture through the earth and detect anything that could be buried underneath. Start at the point where your sewage line exits your home and work your way straight out, inserting your soil probe every two feet along the way.

See also:  How Many Gallons On Septic Tank For Three Bedroom House? (Solution found)

Using this method, you may also locate the cover for your septic tank.

While we highly advise keeping your cover clean and exposed in the event that you require emergency septic service, we recognize that this is not always the case.

2. Use a Septic Tank Map

If you are a new homeowner who is trying to figure out where your septic tank is, a septic tank map should be included in your inspection documentation. You can use this information to assist you in pinpointing the exact position of your storage tank. If you don’t have access to this map, there are a few of additional strategies you might employ.

3. Start Ruling Areas Out

The location of a septic tank cannot be constructed in specific areas due to the risk of causing major damage to your property or tank, as specified by local rules. Your septic tank will not be affected by the following:

  • Immediately adjacent to your well
  • Beneath your home
  • Directly against your home
  • For example, underneath your driveway
  • Under trees
  • And other locations. Structures like a patio or deck are good examples of this.

4. Inspect Your Property

If you take a hard look around your land, there’s a high possibility you’ll be able to locate your septic tank without having to do any probing whatsoever. In many circumstances, a septic tank may be identified by a slight dip or slope on your land that cannot be explained by any other means. Due to the fact that the hole that your contractors dug for your septic tank may not have been exactly the right size, they proceeded to install the tank regardless. This is a rather regular occurrence. It is common for builders to fill in a hole that was too small with more soil, resulting in a small mound on your property that is often covered with grass, dirt, or other natural plants.

During rainstorms, this is often a region that becomes highly wet, and in some cases, floods.

Because of code issues or just because it doesn’t make sense, it’s highly unlikely that your septic tank will be located near any of the following locations:

  • Your water well, if you have one (for a variety of reasons that are rather clear)
  • Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built and no one performed a proper inspection before it was built)
  • Any paved surfaces (it won’t be under a driveway, sidewalk, or patio unless they were added after the home was built and no one conducted a proper inspection before it was built)
  • Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built If there is any particular landscaping

5. Inspect Your Yard

A comprehensive investigation of your yard may be necessary to discover your septic tank considerably more quickly in some cases. The following are important items to check for in your yard:

  • If your septic tank is overfilled, sewage can leak out into the ground and function as fertilizer for your lawn, resulting in lush green grass. A area of grass that is very lush and green is a good sign that your septic tank is just beneath it
  • Puddles that don’t make sense: If your septic tank is seriously overfilled, it is possible that water will pool on your grass. Another telltale indicator that your septic tank is below ground level is an unexplainable pool of water. Ground that is uneven: When installing septic tanks, it is possible that the contractors will mistakenly create high or low patches on your grass. If you come across some uneven ground, it’s possible that your septic tank is right there.

The metal soil probe can let you find out for certain whether or not your septic tank is located in a certain area of your yard or not.

As soon as your metal soil probe makes contact with the tank, you may use your shovel to dig out the grass surrounding it and discover the septic tank lid.

6. Follow Your Sewer Main/Sewer Pipes

Following your sewer pipes is one of the most straightforward methods of locating your septic tank. These pipes have a diameter of roughly 4 inches and are commonly found in the basement or crawlspace of your house. They are not dangerous. Following the pipes from your house out into your yard, using your metal soil probe every 2 feet or so until you reach the tank, is a simple process once they are located. Aside from that, every drain in your home is connected to your sewage main, which in turn is connected to your septic tank.

The likelihood that one of your major sewer lines is located in your basement or crawlspace is high if you have exposed plumbing lines in your basement or crawlspace.

If the line is labeled, it is usually made of plastic or rubber.

7. Check Your Property Records

Lastly, if all else fails, a search of your property’s public records will almost certainly reveal the location of the tank you’re looking for. Your builders most likely obtained a permit for your property because septic systems are required to be installed by law in every state. In order to do so, they had to develop a thorough plan that depicted your property as well as the exact location where they intended to construct the tank. This is done to ensure that the local health department is aware of the tank and is prepared to deal with any issues that may arise as a result of its presence.

If you look hard enough, you may be able to locate the original building records for your home without ever having to get in your car or visit your local records center.

What to Do Once You Find Your Septic Tank

Upon discovering the position of your septic tank, you should mark its location on a map of your property. Use something to indicate the location of your lid, such as an attractive garden item that can’t be changed, to help you locate it. A birdbath, a rock, or a potted plant are just a few of the possibilities. You are now ready to arrange your septic tank inspection and pumping service. Contact us now! If you have any more concerns regarding how to locate your septic tank, or if you want septic tank servicing, please contact The Plumbing Experts at (864) 210-3127 right now!

See also:  How To Make Inlet To Septic Tank? (Perfect answer)

Septic Tank Installations

Wray’s Septic Tank Development delivers timely and quality Septic Tank Installations at reasonable pricing. Contact us now for a free estimate. Providing you with exceptional septic system installs is our team’s specialty. We have over 50 years of combined expertise. Septic system replacement is the last thing a new or existing homeowner wants to hear, especially when they are just getting started in their new home. If you feel you are experiencing problems, please contact us and we will schedule a time to meet with you and analyze the problems you are experiencing with your present system.

  1. This valve should be changed to the opposite number once a year, allowing one portion of your drain field to rest for a period of time while the other section is in use.
  2. In the meantime, you can learn more about septic systems by reading a brief overview.
  3. According to the Environmental Protection Agency (EPA), as of 2007, 20 percent of US houses were employing a septic system.
  4. It is most common for units to be gravity-based solutions, with the tank being located somewhat below the grade of your home.
  5. These tanks are waterproof containers that are typically constructed of concrete or fiberglass and include an entrance and an outflow (see above).

The tank treats wastewater in a natural way by allowing it to remain in the tank for an extended period of time, allowing the particles and liquids to gradually separate through a process known as “anaerobic digestion.” The septic drain field is normally composed of a series of ditches with perforated pipes that are laid on top of crushed stones or gravel to collect waste.

Waste water is accepted by the soil, and it is naturally treated and dispersed back into the soil.

The presence of foul odors outside in the vicinity of your septic tank or drain field is a dead giveaway, but it is not often the first symptom of a system that need care. You should contact us immediately if you see or experience any of the following symptoms or signs:

  • Drains that are slow to drain or wastewater that is backing up
  • Even in the midst of a dry summer, bright green grass or puddles in the drainfield are desirable. a strong stench in the vicinity of the septic tank and drainfield

Free Estimates!Call Today

  • Overview
  • Engineering Specifications
  • Installation and Operation
  • Items
  • And more.

Overview

The Bull Run ValveTM divides and alternates flows to drainfields or systems, extending the usable life of the septic system and reducing maintenance. The Bull Run ValveTM is the safest alternating device available since the operator has no interaction with wastewater (due to the valve’s leak-proof design and exterior working features), and because it is the most reliable. The transition from one field to another may be completed in less than a minute by just flipping a valve, without the need for excavating or contact with contaminated effluent.

For commercial, industrial, and residential applications, it is compatible with all gravity drain field products available on the market.

Engineering Specifications

A non-corrosive alternating valve with 4′′ schedule 40 female connections must be installed in the system. The valve stopper must be non-removable, waterproof, and actuated from outside the valve. It is required that the valve be equipped with an internal stop mechanism for placing the plug and that the plug not jam when the valve is turned from the stop position. There must be no metal parts in direct contact with the wastewater at any time. Each of the valve’s input and output ports must be properly labeled to facilitate installation, and the position of the valve must be clearly stated on the valve’s top to facilitate operation.

A conventional water meter key must be used to activate the valve, which must be located in a way that it is easily accessible from the ground surface.

in Elkwood, Virginia.

Operation by Water Meter Key

It includes a riser cap adapter, as well as a water-tight access cap and a valve key. The valve should be buried at a sufficient depth to allow for simple access and activation from the ground surface using a normal water meter key, if possible.

Pump Systems

The drainfield can be dosed with the use of effluent pumps. Under normal effluent pump working circumstances, the top of the valve is completely sealed with an o-ring and is pressure tight. The maximum pressure that should be used should not be more than 25 psi. The internal plug has been tapered to fit the seating ribs on the valve body. Under low head pressure circumstances, this seating device will prevent bypass from taking place.

Motorized Bull Run Valve™ Specification

To make valve operation as easy as possible, the American Manufacturing Bull Run ValveTM may be fitted with a high torque electronic valve actuator. When coupled with an actuator, the position of the Bull Run ValveTM can be selected manually by the flick of a switch or automatically based on a float switch, repeat cycle timer, or time-based 24-hour, 7-day, or 365-day clock.

The Bull Run ValveTM control panel is fitted with auxiliary limit switches, which alert the operator when the valve has been appropriately opened or closed by the valve.

InstallationOperation

  • In order to avoid the need for concrete or a hold down strap, the valve is intended to be buried directly in the pipe trench. In order for the valve to function properly, the septic tank effluent line must be attached to the valve port marked “IN.” The valve ports that have been labelled “OUT” connections are made to each side of the drainfield
  • The valve port connections are made using a 4″ schedule 40 female slip connector. The riser tube connection is a 4 way connector “Male slip connection according to schedule 40. Water-tight joints should be formed using enough of pvc, abs, or multipurpose glue
  • The direction control handle should be adjusted occasionally to transfer effluent to either one of two septic fields. By unscrewing the screw cap located at the very top of the riser tube, the valve handle may be twisted using the valve key that comes with the kit.
Item Description
BRV4 Bull Run Valve 4″
BRVBULK Bull Run ValveKey Only
BRVKIT Bull Run Valve Kit Complete *
BRVREPKIT Bull Run Valve Repair Kit
PVCFIP4 Female Adapter 4″ T DWV
PVCPLUG4 Plug 4″ T DWV
SDFIP4 Female Adapter 4″ SXT S D
BRVKEY28 Bull Run Valve Key 28″
BRVKEY36 Bull Run Valve Key 36″
BRVKEY48 Bull Run Valve Key 48″
BRVKEY60 Bull Run Valve Key 60″
BRVMOTOR4 Bull Run Valve Motorized

This kit comprises one 4″ BRV, one 28″ Valve Key, one Riser Cap Adapter, one Watertight Access Cap, and one 4″ BRV.

How To Find Septic Tank Location: A Guide for Property Owners

The majority of people prefer to relax on their back patio or porch and take in the scenery rather than worrying about where their septic tank might be. When you know exactly where your septic tank is, it will be much easier to schedule routine sewer line cleanouts and repair appointments. Continue reading to find out more about how to locate your septic tank.

See also:  Why Can'T You Put Bleach In A Septic Tank? (Best solution)

Follow the Main Sewer Line

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your property. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about down there. Look for a pipe with a diameter of around four inches that is leading away from your home or building. Keep a note of the position of the sewer pipe and the point at which the line exits your home so that you can locate it outdoors.

If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your home.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may have to probe a bit further out before striking the tank.

Inspect Your Property

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your yard. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about in it. Look for a pipe with a diameter of around four inches that is leading away from your home or business. Recall where your sewer pipe is located, as well as where it exits your home, in order to locate it while you are out in the field.

If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your house.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may need to probe a bit further out before striking the tank.

  • Paved surfaces
  • Unique landscaping
  • Your water well, if you have one
  • And other features.

If you are still having trouble locating your septic system, you might inquire of your neighbors about the location of their septic tank on their land. Finding out how far away their septic systems are will help you figure out where yours might be hidden in your yard or garden.

Check the Property Records

Are you unsure about how to obtain this? Simply contact your county’s health department for further information. Check with your local health agency to see if they have a property survey map and a septic tank map that you can borrow. Perhaps you will be shocked to learn that there are a variety of options to obtain information about your property without ever leaving the comfort of your own residence. Building permits, for example, are frequently found in county records, and they may provide schematics with specifications on how far away from a septic tank a home should be, as well as other important information such as the size of the tank.

Most counties, on the other hand, keep records of septic tank installations for every address. For further information on the placement of your septic tank, you can consult your home inspection documents or the deed to the property.

Don’t Try to Fix Septic Tank Issues Yourself

Septic tank problems should be left to the specialists. The Original Plumber can do routine maintenance on your septic tank and examine any problems you may have once you’ve located the tank. It is not recommended to open the septic tank lid since poisonous vapors might cause major health problems. Getting trapped in an open septic tank might result in serious injury or death. While it is beneficial to know where your septic tank is located, it is also beneficial to be aware of the potential health dangers associated with opening the tank.

Schedule Septic Tank Maintenance

The maintenance of your septic tank on a regular basis helps to avoid sewer backups and costly repairs to your sewer system. You should plan to have your septic tank pumped out every three to five years, depending on the size of your tank and the number of people that reside in your home. The Original Plumber offers skilled septic tank and drain field maintenance and repair services at competitive prices. While it is useful to know where the septic tank is located, it is not required. Our team of skilled plumbers is equipped with all of the tools and equipment necessary to locate your tank, even if you have a vast property.

We are open seven days a week, twenty-four hours a day.

Frequently Asked Questions

A septic system is a system for the management of wastewater. Simply said, wastewater will exit your home through pipes until it reaches your septic tank, which is located outside your home. Septic tanks are normally located beneath the surface of the earth. Solids and liquids will separate in the septic tank as a result of the separation process. Eventually, the solids will sink to the bottom of the tank and the liquids will drain out into your leach field.

How do I know if I have a septic tank?

Even if there are no obvious signs of a septic tank in your yard – such as uneven landscaping – there are a few techniques to assess whether or not your home is equipped with an onsite sewage system. Checking your property records is the most reliable technique to ensure that you are utilizing the correct system. When you acquired your house, you should have received a copy of the septic system map with the property documents as well. Checking your utility bill is another way to determine this.

If you’re also using well water, it’s possible that you won’t receive one at all.

What do I do once I locate my septic tank?

Once you’ve discovered where your septic tank is, there are a few things you should do. It is critical to clearly mark the position of your septic tank. With our inspection, pumping, and repair services, you can save time when you need a sewer line cleanout or a septic tank maintenance job completed quickly. Make a note of the location of your tank so that you can find it again if necessary. It should be heavy enough so that it does not fly away in windy conditions. A creative approach to accomplish this without having an unattractive flag or marking in your yard is to use garden décor or a potted plant.

This way, you’ll have it for future reference and will be able to quickly locate the exact position if necessary.

Then contact The Original Plumber to have your septic system maintained on a regular basis. Preventing worse problems and the need for costly repairs down the line may be accomplished via proper septic system maintenance. All of the heavy lifting has been delegated to our team of professionals.

Leave a Comment

Your email address will not be published. Required fields are marked *