How To Clean Backed Up Septic Tank?

Sprinkle the drain with baking soda, then dump vinegar into the pipe. Leave the mixture to sit in the pipe for an hour or two. Finally, flush the drain with hot water. If the clog is small, this could be enough to clear the pipe.

Dump a couple of teaspoons of baking soda into your clogged drain, followed by one half cup of vinegar. This will create a fizzing action that may cause a fizz-like eruption. This is normal. This fizzing action may help to break the clog up and get things moving in your drain once again.

How do you clear a backed up septic tank?

Dump a couple of teaspoons of baking soda into your clogged drain, followed by one half cup of vinegar. This will create a fizzing action that may cause a fizz-like eruption. This is normal. This fizzing action may help to break the clog up and get things moving in your drain once again.

Can I clean my septic tank myself?

Can You Clean a Septic Tank Yourself? Technically, you can clean a septic tank yourself. If done incorrectly, you can damage your tank, improperly dispose of waste, or fail to remove all of the waste from the tank. You should hire a professional to clean your septic tank for many reasons.

How do you break down the sludge in a septic tank?

Here are a few things you can do to help you break down the solid waste in your septic tank:

Active Yeast. Add ¼ to ½ cup of active dry yeast to your toilet bowl and flush it down your toilet.
Rotten Tomatoes.
Hydrogen Peroxide.

Inorganic Acids.
Chemicals.
Pumping.

What will dissolve roots in septic tank?

Flush 2 pounds of granular copper sulfate down the toilet for every 300 gallons of water that the septic tank holds. Copper sulfate kills and dissolves tree roots as they absorb the tank’s water. After entering a tank, the majority of copper sulfate settles in tank, and little passes into the leach bed line.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

Your Drains Are Taking Forever.

Standing Water Over Your Septic Tank.
Bad Smells Coming From Your Yard.
You Hear Gurgling Water.

You Have A Sewage Backup.
How often should you empty your septic tank?

How do I clean my septic tank naturally?

You can mix about a 1/4 cup of baking soda with 1/2 cup of vinegar and 2 tablespoons lemon to make your own natural cleaning agent. The baking soda will fizz up to help get the dirt and grime in your tub and drains. It’s a great cleaner and your septic system will thank you!

How often do you pump your septic tank?

Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.

Can a septic tank never be pumped?

What Are the Consequences of Not Pumping Your Tank? If the tank is not pumped, the solids will build up in the tank and the holding capacity of the tank will be diminished. Eventually, the solids will reach the pipe that feeds into the drain field, causing a clog. Waste water backing up into the house.

Do you really need to pump your septic tank?

Septic Tanks require regular pumping to prevent malfunction and emergency servicing. The most fundamental, and arguably the most important element required to maintain your septic system is regular pumping of the septic tank. Most experts recommend pumping the septic tank every 3 to 5 years.

What eats waste in septic tank?

Large colonies of bacteria and enzymes in your septic tank keep the tank from backing up or overfilling. Enzymes go to work on the scum, and bacteria goes to work on the sludge. The microbes eat the waste and convert large portions of it into liquids and gases.

What eats sludge in septic tank?

One example of a homemade remedy is to flush ¼-½ a cup of instant yeast down your toilet. The yeast eats away at the sludge and helps loosen it, breaking it down so that wastewater can get through.

How long does it take for poop to break down in a septic tank?

The bacteria take 2-4 hours to germinate and then begin to break down solid waste. If the temperature and conditions are favorable, then the bacteria will multiply to the maximum level that the environment will allow in about 2-4 days.

Can you put root killer in septic tank?

Root Killer is non-corrosive and safe for all types of plumbing and will not harm surrounding trees, ground cover, or the natural bacteria content in septic tanks and cesspools.

What kills roots in drain field?

Copper sulfate can be injected into the drain field (past the tank) to kill roots.

Can you put root killer directly into septic tank?

RootX root killer can also be added directly to the septic tank at a rate of 8 pounds per 1,000 gallons of septic tank capacity.

Septic Tank Backup: Warning Signs & How To Fix It

In the testing of drinking water, the coliform bacteria are employed as the benchmark to determine the bacterial quality in the water. In contrast to other bacterial species, coloniform bacteria are a cluster of many diverse bacterial species that live together in close proximity. In addition to coloniform bacteria present in the digestive systems of humans and animals, coliform bacteria may also be discovered in human and animal waste. The soil and surface waters of the world include certain forms of coliform bacteria that naturally occur (lakes, rivers, ponds, etc.).

A simple chlorination method may disinfect the majority of wells.

NITRATESGroundwater systems should be examined for the presence of nitrates, as well as for other contaminants.

Nitrates are not removed from water when it is heated to a boiling point.

Examples of such compounds include metal, a solvent, insecticides, herbicides, and petroleum products.
The Health Department has information on the potential health consequences of these chemicals.

DO double-check that the well cap is firmly fastened and not damaged before proceeding.
Examine the well cover for signs of insect infestation on a regular basis, as well (i.e.
DO take precautions to keep your well safe (vehicles, lawn mowers, etc.).

Tests should also be performed in the event that you suffer from stomach ailment on a regular basis.
DO test your water after significant rains/flooding or if the well has been fixed to ensure that it is safe.

If you are having issues with your water well system, you should contact a professional well driller.

DOESeal abandoned wells properly because to the fact that they pose a safety risk and give a direct pathway for pollutants to enter the system (backflow devices on hoses, etc.).

DON’T make the mistake of assuming your well water is safe for consumption.

Chemicals should not be used or stored within a 100-yard radius of your water source.

If a water sample reveals the presence of coliform bacteria, do not consume the water until the bacterium has been removed.

Groundwater contamination is a concern because of these dangerous goods.

Return to the beginning of the page Why Do People Dig Their Own Wells?

Approximately 40 feet to hundreds of feet beneath the surface of the earth, groundwater is stored and transported through aquifers made up of layers of gravel, limestone, shales, and sandstone.

A safe water supply for the property owner is provided by private water well systems that are properly planned, constructed, and maintained.

Large pollutants are filtered out initially by the (1)well screen, which serves as a first filter.

Drillers inserted a steel or plastic pipe in your well when it was first constructed to prevent the well bore from collapsing during the drilling process.

It permits water to enter through the (5)well casing while protecting it from surface pollution because of the use of a pitless adaptor.

Sixth, the well cap serves as a protective cover and should be securely fastened to the casing by means of a vent that enables only air to pass through it.

The fuses for the well are kept in the(10)electrical control box.

Water flows via the water line and into the(11)pressure tank, where it is filtered. Homeowners can get direct access to a sample of water from their well before it enters the distribution system by installing a sampling faucet (12). Return to the beginning of the page

How Does A Septic Tank Work?

A basic septic tank is composed of two components: Watertight subterranean tank for storing sludge and wastes 2) and a drain field, which treats and filters water as it returns to the soil after being drained. When everything is running correctly, this mechanism keeps potentially hazardous material in situ and only allows treated water to escape. All that is required is that the waste be pumped out every few years, and the system will continue to operate properly. However, if you’re reading this, you’re probably aware that this isn’t always the case.

Why Do Septic Tanks Backup?

A backed-up septic tank is a major headache that can occur for a variety of reasons. Some events are under your control, while others may occur at any time. Septic tank backlog can be caused by a variety of factors, some of which are listed below: Flooding: When heavy rains soak the earth around a septic tank, the tank may have a difficult time emptying correctly, leading to flooding. The trash and the clean water will mix together and run out simultaneously if there is no dry soil to absorb the pure water.

Tanks are available in a variety of sizes.
Unsatisfactory Installation: Unless you built your home from the ground up, you may not be aware of who constructed your septic system or how old it is.
Before purchasing a new house, make sure to get the septic tank inspected.

Only rubbish and toilet paper should ever be flushed.
If you’re not sure whether anything is flushable, look to see if the box says “septic safe.” If it doesn’t, toss it in the garbage!
Growing tree roots may even cause obstructions in pipes as they creep into cracks and crevices.

Make sure your tank is well marked and that any prospective traffic is kept away from it.

Warning Signs of a Backed Up Septic System (And What to do About It!)

It can be difficult to determine the signs of a backed-up septic tank at first glance.

At first glance, you might dismiss any of these warning signs as being inconsequential. However, it is critical to take all of these warnings seriously and to conduct an investigation into the matter. Identify if any of these warning signs are present in your home.

Was it a while ago that you had your septic tank drained and cleaned? In the absence of a regular cleaning routine, you may notice sewage backups in your toilet as well as slow draining sinks and bathtubs in your bathroom. This is an indication of clogs. Without frequent pumping, a septic tank fills up with solid waste and enables contaminated water to pass through

However, the unclean, polluted water has nowhere to go and must be pumped out regularly.

Your driveway or sidewalk may be gradually rising due to tree roots if you see bumps in the road or uneven surfaces. There are a few different approaches you may use to deal with roots in your septic system. It is the most lasting method if you are ready to part with the tree, removing it totally, removing and replacing it with new pipes. Newer, stronger plastic pipes are designed to withstand tree roots and are an excellent alternative to metal pipes. Alternatively, you may pour a root-killing solution down the drain to prevent future development.

In one spot of your yard, do you have a clump of vivid green grass growing? Are you observing pools of water even when it hasn’t rained? Your septic system’s leaky pipes are clearly visible in these conditions.

It is a strong indication that you have a septic tank backlog if your home begins to smell like a sewer. If sewage cannot adequately drain down into the tank, the only option is for it to flow back up the pipes.

If you have seen one or more of these warning signals, it is important to take action before the issue gets out of hand, since there are actual implications of a backed-up septic tank.

Dangers of a Backed Up Septic Tank

A clogged septic tank may cause far more serious problems than just a puddle of water in your shower. Septic backflow is a serious health threat for you and your family, since it is a carrier of illness. In sewage, drug leftovers, human waste, fungi, viruses, and bacteria can all be found in large quantities. If you see any sewage backup bubbling into your house, call for expert aid in disinfecting your home. When you have a clogged septic tank, water damage is a definite possibility. Septic tank leakage in your house may severely harm your flooring and walls, as well as the rest of your property.

Untreated sewage from your clogged septic system can have far-reaching consequences for the ecosystem surrounding your home.

If you see signs of a clogged septic system, you should either attempt to fix it yourself or hire a professional like All Dry USA to do the work for you.

How To Fix Septic Tank Backup

The most effective technique to repair a septic tank is through regular maintenance. If you have a big family, make sure you get your system pumped every 3 to 5 years, or more frequently if necessary. Regular pumping will hopefully save a giant backhoe from ripping up your yard and repairing a sewage tank that has broken down on you. Check to ensure that your float switch is functioning properly. This will automatically turn off the system and shut off your water supply to prevent a potential backup from occurring.

Snakes may be obtained at any hardware shop and are available in a variety of sizes to accommodate the size of your pipes.
Calling (866) 313-0458 at any time of day or night to speak with All Dry USA about your backed-up septic tank is a terrific answer.
As a result of our more than ten years of repair experience, we haven’t come across an obstruction, a pipe, or a septic tank that we couldn’t clear out and put back in working condition.

Ben possesses a wide range of specialized qualifications and certifications in the fields of repair and building.

What to do if your septic system backs up?

The steps you should take if your septic system begins to back up.

Make sure you follow these procedures to ensure that the problem is resolved!

1. Stop Running Water

The steps you should take if your septic system begins to back up Ensure that you solve the issue by following these instructions!

2. Check the Water Level in Your Septic Tanks

After that, you need to figure out where the problem is stemming from. Perhaps there is no problem with your septic system at all, but the plumbing between your house and the tank may have been blocked as a result. In order to accomplish this, the amount of water in your septic tank must be checked. We recommend that you hire a waste-water specialist to take care of this for you, as entering your tank may present a risk of injury or death. If you decide to do the inspection yourself, keep in mind that tank lids can be heavy and may require specific tools to open properly.

Normal Operation Level:

It is difficult to define what constitutes a “full” septic tank. The normal operating level will look somewhat like the image on the left of this page. In order for the “riser” to ascend to the surface, there should be no water present. The sewage connection from the home to the septic tank should be checked for damage or obstructions if your septic system is backing up yet your septic tank has a normal operating level, such as the one illustrated in the illustration below. However, while John Todd Co.

When it comes to sewage line scoping, a camera tiny enough to penetrate your pipes and check the problem regions is available as a service from our company.

Overfull Level:

It is necessary to have your septic tank pumped if you open the lids of your septic tank and see water pouring into the riser, as shown in the illustration to the right. Always be sure that whomever is pumping your septic tank is keeping an eye out for any backflow from the soil treatment area (for gravity systems). A failing leach field will be evident if you detect water gushing back into the tank from the leach field for an unusually long period of time. Septic tank pumping is a service provided by John Todd Co., and the company even provides an after-hours emergency pumping service for customers.

To use hot water, turn on all of your sinks, showers, and tubs, and flush a toilet two to three times, as needed.

This forces anything that may have become lodged in the pipes between your tank and your house during the back up to the surface of the water.

3. Follow Up with Repairs

Pipe cleaning and septic tank pumping are merely short fixes for a long-term problem. Make sure you follow up on any repairs that have been recommended to you. Your sewage line being clogged might be due to a broken or deformed pipe that has to be repaired or removed and replaced. It will be necessary to have a new leach field created if your existing leach field is not absorbing water.

You can contact us at any time if you have any queries or need assistance with the situation. Call (303) 791-0520 to talk with a member of the John Todd Co. team who is knowledgeable about the company’s products and services.

How to Clear a Clogged Septic Line

If you have ever dealt with a backed-up drain, you know the cleanup procedure is less than pleasurable. Sewage line blockages are often caused by an obstruction in the pipes or when the septic pipe levels out and prevents gravity from conducting its work.

Symptoms of a Clogged Drain

In virtually all cases, when you have a clogged drain or pipe, you will feel at least one of two symptoms. An foul odor emanating from the sink, toilet, drain, or other plumbing fixture almost always indicates the presence of something as unpleasant impeding the course through the pipes. In sinks, it is almost always food that is the source of congestion. In toilets, it’s possible that someone flushed something they shouldn’t have, or that they truly emptied and should have used a mid-session flush instead of the first flush.

2. Water Going the Wrong Way

Water is intended to wash down the drain and not come back up, so it makes sense that it would. Some obstruction is causing your sink or shower to take an excessive amount of time to train. Even though a blocked line is typically caused by anything that has been flushed down the toilet, the source of the problem may be located deep inside the heart (and pipes) of the septic system itself. It is possible that tree roots are causing your septic system to back up. Obviously, if this is the case, you’ll want to consult with a specialist right away.

It is possible for your pipes to freeze during the winter months if they are not buried at the right depth.

Tips for Clearing a Clogged Drain

Before you call a septic company, there are a few things you may do to try to unclog your drain on your own that may be successful.

1. Avoid cleaners with chemicals

Chemical-laden cleansers have a tendency to degrade the enzymes in your septic system, which are designed to aid in the degradation of waste. Instead, use a drain cleaner that is suitable for septic systems and does not include any harsh chemicals. A professional cleaner should always be kept on call in the event of an emergency.

2. Pour hot water down the drain.

The surge of hot water, particularly in kitchen sinks, is typically sufficient to dislodge or dissolve any clog in the pipes. Check to see whether boiling water might be of assistance before seeking expert assistance.

3. Use baking soda and vinegar.

If water alone is ineffective in dissolving the obstruction, a baking soda and vinegar reaction may be used to achieve success. Pour a couple spoonfuls of baking soda down the drain, followed by a cup of vinegar, then flush the toilet. The fizzy explosion aids in the breakdown of waste and the restoration of normal flow. The fact that you are unable to unblock the blocked drain by yourself might indicate that the problem has reached a deeper level. An impediment other than food might be blocking one or more septic system pipes, which could be collapsing.

Septic systems are something we are very familiar with, and we can handle just about any septic problem, including a clogged drain or septic line, thanks to our 40 years of experience. If you have any reason to believe that there is an issue with your system, please contact us.

who should you call for septic issues?

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. If you believe that your septic system is having troubles, or if you require septic replacement components such as septic filters, please contact us right once.

Our affiliate connections to these items generate a small profit for us if you decide to purchase them via our links.

How to Unclog Your Septic Tank

Documentation Download Documentation Download Documentation In the event that you have slow drains, pooling water in your yard, or foul aromas near your septic system, it is possible that one of the pipes has become clogged. Fortunately, there are several methods for removing blockages from your sewage system that do not require the services of a septic service specialist. To begin, search for any apparent obstructions inside your septic tank and try if you can drive them out with a little force.

Following the removal of the blockage, be sure to properly maintain the septic system in order to keep it clean!

1 Check the inflow pipe by lifting the access cover of the tank that is nearest to your residence. The plastic or concrete cover in your yard that is closest to your house should be the first place you look. Carefully raise the cover of the tank up and away from the tank so that you can see what’s within. If you notice a white or green pipe at the end of the tank closest to your home, look for anything that might be blocking the pipe’s outlet. If there is, it is possible that the blockage is the source of the problem.

Assuming the water level is below the level of the entrance pipe, the blockage might be located in the drain pipe that runs between the septic tank and your residence. If the water level is higher than the inlet but there is nothing blocking the end of the pipe, the clog is most likely in the leach field
However, this is not always the case. It may be necessary to dig up the access lid with a shovel or raise it with a pry bar in order to get access.

Advice: If you are unable to locate the access lid for your septic system, consult with your home’s as-built plans, which are blueprints prepared after your home is constructed, or with a professional septic service. 2 If the scum is trapped at the end of the input pipe, use a pole or a stick to push it out of the way. The scum layer is composed of solid waste that accumulates on the surface of the septic tank. Make use of a long, strong piece of wood or metal to slide the scum down or to the side of the entrance pipe as needed. Continue to remove as much scum as you can from the area around the pipe so that it can continue to fill your tank.

If you are working in your septic tank, you should always wear gloves to prevent bacteria and waste from getting on your hands. If water starts to flow out of the pipe after you’ve pushed the scum out of the way, you’ve successfully eliminated the clog.

Advertisement
s3 If the blockage is deeper inside the pipe, use the pole or stick to probe the end of the pipe. Insert the end of the stick or pole you’re using as far as it will go into the end of the pipe you’re working with. Make use of the end of your probe to scrape the edges of the pipe and draw any waste from the pipe into the tank. Even if the clog is at the very end of the pipe, you should be able to dislodge it and get the water flowing once again. It is likely that the clog is located deeper inside the pipe if water does not flow out of it.

Depending on where the pipe is located, you may or may not be able to insert your probe into the pipe.

4 Disinfect any instruments you used by mixing a 5:1 solution of water and bleach together. Stir up 1 part chlorine bleach and 5 parts clean water in a big bucket until the chlorine bleach is completely dissolved. Immerse your tools in the solution and allow them to soak for around 5 minutes to destroy any germs that may have remained on the surface. When you’re finished, drain the liquid back into your septic tank.

If at all possible, take a shower or bath as soon as possible after working on your septic tank

When you wash your garments, use bleach or laundry sanitizer to ensure that no bacteria is left on them after washing.

5 If you were able to resolve the issue, replace the access lid on the septic tank. Lift the lid and place it over the opening that leads into the septic tank to prevent it from closing. Slowly drop the lid down until it fully covers the hole and does not move around any more. Continue to leave the lid open in order to insert a mechanical auger if you haven’t removed the blockage.

Never leave the septic tank door open while you aren’t working on it to prevent anything from falling into the tank.

6 If your tank was completely full, have a professional service drain it out within 5 days. Even after clearing the blockage, your tank is likely to back up again if the main tank is completely filled to the entrance line. Inform septic service personnel that the scum level has reached the pipe by contacting them through telephone or email. It is best to schedule them within the following 5 days, otherwise you will increase the likelihood of septic fluid returning up the drainpipes. The service will drain your septic tank, ensuring that scum does not re-enter your plumbing system.

6 If your tank was full, call a professional service to pump it out within 5 days. Even if the clog is removed, your tank is likely to back up again if the main tank is filled all the way to the inlet. Inform septic service personnel that the scum level has reached the pipe by contacting them through phone or email. You should try to schedule them within the following 5 days, otherwise you will increase the likelihood of septic fluid flowing back up the pipes. In order to prevent scum from reentering your pipes, the technician will drain your septic tank.

In order to get to the inflow line, you must first remove the septic tank access lid that is closest to your residence. Because the intake pipe is more likely to be located on the access lid nearest to your home, if your septic tank has multiple access lids, select the one that is closest to your home. Using your hands, lift or pull the tank’s cover off and set it aside while you continue to work. Inside your tank, look for the end of a white or green pipe that protrudes from the side that is closest to your house.

If you are unsure about the location of your tank’s access lids, consult your home’s as-built plans or consult a professional service.

2 Insert the cutting blade of a mechanical auger into the jammed pipe’s end with the auger’s handle. A mechanical auger is comprised of a long metal cable that is inserted into your pipes and equipped with a revolving bit that cuts through the obstruction. Begin at the end of the blocked pipe or at an access point for the pipe, such as a cleanout port, to unclog the blockage. Placing the cutting blade of the auger inside the obstructed pipe and pushing the line in around 1–2 feet (30–61 cm) can clear the blockage.

2 Insert the cutting blade of a mechanical auger into the jammed pipe’s end with a ratcheting motion. Using a mechanical auger, you can cut through a clog using a long metal cable that you insert into your pipes and has a revolving bit. Begin at the end of the blocked pipe or at an access point for the pipe, such as a cleanout port, to unclog the pipe. Placing the cutting blade of the auger inside the obstructed pipe and pushing the line in around 1–2 feet (30–61 cm) can clear the obstruction.

When you’re ready to start the auger, make sure you put on your safety glasses and work gloves first. Because mechanical augers include spinning and moving parts, it’s important to cover your eyes to avoid injuring yourself if you lose control of the machine. Wearing heavy-duty work gloves can help you prevent spreading germs and being harmed when handling the line. The auger should be connected to the nearest electrical outlet and the switch should be in the On or Forward position.

It’s possible that you’ll require an extension cord to connect the mechanical auger. You should never use the auger without wearing gloves or wearing safety eyewear since you might suffer a serious injury. Because the auger would spin violently if you start it with the cutting end outside of the pipe, you should never do so.

4) Continue to feed the auger deeper into the pipe until the obstruction is broken apart. Holding the auger’s line with both hands, guide it into the pipe until you encounter resistance if necessary. Try rotating the line in your hands to see how far it will travel within the pipe if the resistance feels substantial. It is possible that it has encountered a curve in the pipe. To drive the obstruction apart if this is not possible, use short, back and forth strokes to push and pull the auger. Continue to force the auger into the blocked piece of pipe until it is able to pass smoothly through it

If you successfully clear the clog, water will begin to flow through the pipe again while you are still inside it with the auger. Mechanical augers are available in a variety of lengths, so if the one you’re currently using isn’t long enough to reach the blockage, consider renting the next largest size.

Keep at least one hand on the auger’s line while it is operating to ensure that it does not spin or rotate while you are trying to feed it. Before removing the auger from the pipe, be sure it is turned off. Make sure that the auger’s power switch is in the Off or Reverse position so that you can easily remove it from the ground. With both hands, gently guide the auger’s line back into the container, then slowly bring it back through the pipe to the other end. Using a hose or paper towel, carefully remove the auger end out of the pipe and clear off any dirt or trash that has become lodged on the end.

It is not advisable to remove the auger from the pipe while it is still operating since it might cause injury. Remember not to touch the auger’s line with your bare hands because it has just passed through a pipe that contains garbage and potentially deadly bacteria.

6 The tools should be cleaned with a solution made up of 5 parts water and 1 part bleach. Stir the solution together by pouring 1 part chlorine bleach and 5 parts clean water into a bucket and mixing thoroughly. Clean the end of the auger with a cleaning rag to eliminate any germs that may have remained on the surface and avoid contaminating other parts of the machine. You should drain the solution into your septic tank after you’re finished

Don’t flush the cleaning solution down the toilet since it contains bacteria from your septic tank that are dangerous.

7Remove the septic tank’s cover and replace it. Lift the lid off the ground by grabbing it by the handles or the sides of the container. Lift and carefully drop the lid back onto the opening going into your sewage treatment system until it is completely enclosed. Make sure the lid does not slip or shift in any way, or otherwise it may break loose and fall off the septic tank. Advertisement

1 Other than water and natural garbage, avoid dumping anything else down your drains. Water, human waste, and toilet paper are the only things that septic tanks are designed to handle
Thus, any additional products can cause the entire system to get clogged. To avoid clogging pipes, place paper towels, wet wipes, food scraps, and other solid waste in the ordinary garbage instead of in the recycling container. Make it clear to other people in your home what they can and cannot flush down the toilet to avoid clogging the drains and pipes.

Using strong chemical cleansers down your drain is not recommended due to the possibility that they can destroy the natural bacteria in your septic tank that is responsible for decomposition of solid waste. You should never pour cooking oil down the drain because it might harden in the pipes and cause blockages that are difficult to clear.

As a reminder, you do not need to add any additional natural enzymes or bacteria to your septic tank in order for it to properly break down solid waste. Any additional enzymes will be ineffective in comparison to the enzymes that naturally present in the tank
2 Reduce the amount of water you use in your home so that the septic system can drain correctly. Avoid running water in your home until absolutely necessary, since doing so may cause the tank to fill up too rapidly and overflow. Use as little water as possible when bathing or cleaning, so that you only have as much as is necessary at any one time. In the event that you have any outdated or leaking fixtures, you should repair them or replace them with more energy-efficient systems, such as toilets that flush less water or faucets with aerators.

It will also save you money on your utility bills if you keep your water consumption to a minimum.

3 Avoid driving or planting over the area where your septic tank is located. Heavy weight can cause pipes going from your septic tank to collapse or break, so if at all possible, avoid driving over the region in a vehicle as much as possible. Plant roots can also grow into the pipes or septic tank, causing them to clog more quickly than they otherwise would. Maintain a distance of at least 20–30 feet (6.1–9.1 m) between your septic system and any trees or plants you intend to plant so that the roots are not able to grow within.

Even if you use a mechanical auger to remove the roots out of your pipes, the roots will come back if the problem is not addressed. Root barriers purchased from gardening supply stores destroy roots on touch and can help to prevent overgrowth in your septic system. To protect your septic system from pipes, dig a trench around it that is 2 feet (61 cm) deep and 3 feet (91 cm) away from them. Make sure that you place the root barrier in the trench vertically before you fill the trench back up with earth.

4 Improve drainage by cleaning the effluent filter located on the outflow pipe. The effluent filter is a plastic cylinder that is installed in the exit line of your septic tank to prevent solid waste from escaping. Make sure the tank closest to your home has an access cover that can be opened. Look for a vertical white or green pipe that holds the filter and protrudes through the top layer of scum on the interior of the filter. Remove the filter from the vertical pipe by pulling it straight out and rinsing the waste back into the tank using a hose. Push the filter back into the pipe so that it may continue to prevent waste from escaping

Not every septic system will be equipped with an effluent filter
However, most will. Check your filter every time you have your tank pumped or examined to ensure that it does not become clogged.

5. Have a professional inspection of your septic tank performed once every three years. Septic tanks typically take 3–5 years to fill, however this might vary based on the size of the tank and the quantity of water it receives. Consult with a professional provider to have the water levels and pipes for your system checked to determine if any adjustments are necessary. If the provider has any issues, you should solve them as quickly as possible to avoid having a malfunctioning septic system later on. Advertisement

Create a new question

Question What is the location of your septic tank? David Balkan is a writer who lives in New York City. A professional plumber and the CEO of Balkan Sewer and Water Main David Balkan is a licensed professional plumber who also serves as the CEO of Balkan Sewer and Water Main Service and the President of Balkan Sewer and Drain Cleaning, among other positions. With over 40 years of experience as an active owner of these businesses, David is well-versed in the challenges that arise with water service lines, sewers, and drain lines. David has served on the Executive Committee of the Sub Surface Plumbers Association of New York for more than 30 years and is now the Chairman of the Master Plumbers Council’s Committee on Plumbing. As a result of his expertise and solution-oriented approach, Balkan Sewer and Water Main Service has grown to become the biggest and most trusted sewer and water main service in New York City, and the recipient of the 2017 Angie’s List Super Service Award. Answer from a Professional PlumberCEO of Balkan SewerWater MainExpert Because they have to be pumped out on a regular basis, they usually have clean outs that are visible to the public. The quickest and most straightforward method is to discover your major house trap or clean out. Typically, the first tank would be 15 feet or somewhat more away from the outer wall of your home because it is frequently the very minimum distance that is needed by building codes. Once you’ve identified your primary cleaner or trap, you may utilize the instruments that experts employ. Their electronic pipe tracing equipment may be inserted into your main sewer line, allowing them to find and locate where the tanks are located. Question Is it harmful to my septic tank to use too much Rid X at one time? Using excessive amounts of Rid X will have no negative consequences. Question Is it possible that heavy rains or storms might cause difficulties for my septic system? Daniel and Robin KirbyAnswer from the Community Identifying a concave indention over your field lines or over your septic tank is important if you’re experiencing troubles every time it pours rain. Because of this, water can accumulate directly on top of your field lines, resulting in an overflowing sewer system. To correct it, just fill up the sunken sections with concrete. A short hill in the middle, sloping down to normal grade on both sides of the field line for approximately two feet, may correct this
Nevertheless, Question Is there a natural enzyme, such as dry yeast, that may be utilized instead of paying for expensive enzyme treatments or having a septic system that has only been used by one person pumped out? The man that came to service our septic system had a lot of expertise. He informed me that we could save money by simply adding a package of standard yeast to the mix once or twice a month, rather of buying special yeast. I buy the store brand (which costs 79 cents a packet) and flush a couple of packets every month down the bathroom sink. That is all there is to it. Question What is the best product to use in the toilet to protect my septic system from damage? Daniel as well as Robin Kirby Community Answer Although there is enough of food for your bacteria in a septic tank, it dies due to a lack of oxygen, therefore if you add additional bacteria, they will die practically as soon as they are flushed out with the wastewater. A treatment plant, where oxygen is fed into the tank, may increase the number of bacteria from the millions that exist in a septic tank to billions when both aerobic and anaerobic bacteria can grow! Having said that, treatment plants should be drained out more frequently than septic tanks, according to industry standards. Question In the case of a septic system, what can I use to unclog a clogged sink drain? For myself, I prefer to use a plastic drain snake. It is a plastic ribbon with little barbs that grip anything is obstructing your drain and pulls it out of the way (usually hair). While they are inexpensive and quite effective, they are also a bit dirty

Question When my septic tank becomes clogged with oil and hair bleaching chemicals, what should I do to clear it out? No oil or grease should be flushed down the toilet or into the septic system. Put it in a grease can and toss it out of the window. As far as bleach is concerned, it destroys the microorganisms that your septic system requires in order to function properly. You might wish to look into septic-safe items
They are available.

Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement

Unless you are skilled in septic tank unclogging or there is significant damage to the pipes, you should hire a septic specialist to conduct the necessary repairs for you to guarantee that everything is in compliance with the law. When working on your septic tank, always use protective eyewear and disposable gloves to prevent contamination.

Things You’ll Need

Hose

Paper towel
Mechanical auger
Safety glasses

Work gloves

About This Article

The writers of this page have together authored a page that has been read 314,959 times.

Did this article help you?

Septic tanks are a way of life for many people in rural regions, and for good reason. The most of the time, they are out of sight and out of mind. That is, unless something goes wrong and the septic tank begins to back up into the house. Then there’s an issue, and then there’s a big mess. In addition, there is the matter of what to do. If your septic tank does begin to back up, there are a few things you may take to resolve the situation.

How a Septic Tank Works

The first step in resolving a septic problem is to have an understanding of how a septic tank truly operates and functions. A septic system is composed of three components:

Your toilet, sink, and tub all have lines or pipes that go from them that use gravity to transport waste outdoors to a holding tank. Essentially, the holding tank serves as a bacterial chamber for breaking down solids. Then there’s the disposal field, which distributes liquids such that they may be absorbed into the earth over time. In the event of a blockage or obstruction in any one of these components, a septic backup will occur.

Types of Septic Tanks

There are three basic types of septic tank materials: concrete, plastic, and metal. The first is made of concrete, the second of fiberglass, and the third is made of polycarbonate plastic. The difference between them is the pricing range they provide as well as the strength or durability of their products. All of them do the same duty of collecting waste and separating solids from liquids, but the materials used in their construction have no effect on backup. It is the overall design of your septic tank “system” that makes the most impact in the frequency of septic tank backups.

One is straightforward and relies on gravity to empty your waste into a holding tank.

Because it is pressurized, the second septic system is more complicated than the first.

The spilling liquid is then gravity-fed into a second, smaller tank located downstream of the original. However, in this case, there is a pump that pressurizes the overflow liquid and distributes it uniformly throughout the drain field.

Steps to Take When Fixing a Septic Tank

Now that you understand how septic systems function and whatever type you have, you must identify the source of the problem and take the necessary actions to correct it.

Isolate the source of the obstruction. To begin, open the tank lid and check the amount of the liquid within the tank. If the tank level is low, this indicates that there is a barrier upstream between the home and the tank. If the tank is completely filled, you’ll have a downstream problem
Look for a power interruption or a jammed float switch to rule out. Usually, restoring one of these will restore your system to its previous state
Inviting a professional with the skills and instruments to externally remove the obstruction is a good idea. This involves the use of cameras to determine the exact source and position of the obstruction, as well as augers to remove the impediment.

Septic Tank Backup Prevention

The most critical action you can take is to avoid a septic tank backlog from occurring in the first place, as described above. Here are some recommendations for prevention:

Always check to see that your septic tank is still biologically active. Use of antibacterial soaps and cleansers that leak into the tank is discouraged. Never use the system to dispose of rubbish or other alien things. By their very nature, human waste is biologically active, but raw food scraps are not. Garburators are extremely dangerous criminals. Planting trees in close proximity to your sewage lines is not recommended. It is well known that tree roots will search for water and nutrients within sewage pipes. You should avoid operating heavy machines over sewer lines since they will puncture and obstruct them in no time. Moreover, lines are readily crushed and damaged

With a little forethought, you can ensure that your septic tank continues to function for an extended period of time with little or no maintenance. That’s exactly what it’s intended to do.

4 WAYS TO ENSURE YOUR SEPTIC TANK CLEANING GOES SMOOTHLY

Whatever your experience level with septic systems, whether you’ve recently moved into a home with a septic system or you’ve been doing it for years, you’ll still need to have your septic tank cleaned out on a regular basis. It’s possible that you’re not aware of it, but what you do in between tank cleanings has a significant impact on how well the cleaning goes. It is true that you have an impact on your septic tank cleaning beyond simply following basic septic tank maintenance guidelines, such as conserving water and not dumping cotton swabs down the toilet.

1.
Some of your household systems and equipment, such as your air conditioning unit, require yearly maintenance, which means that you can arrange a maintenance visit at the same time every year to ensure that everything is running well.
In addition, a neglected tank might overflow and produce a variety of problems.
Alternatively, you may request a reminder from the firm two or three years after your previous pumping.
2.
It may be incredibly beneficial to know what sort of system you have, how large it is, and when and where it was built in order to make informed decisions.
If you can locate your septic system’s own specific as-built diagram, which displays the position of the tank, you can save a significant amount of time searching for it.

Identifying and anticipating problems before they may manifest themselves and cause issues such as clogs and leaks can help to make your septic visit go much more easily (and save yourself a lot of money on repairs).

Also, don’t wait until the midst of winter to request a pumping, especially if you live in a cold climate; digging out a tank access point while the ground is fully frozen is considerably more difficult (and often impossible).

Another approach to save the technician’s time is to locate the tank’s access point (or access points, if the tank has more than one, as some tanks have) and dig it up yourself before the technician arrives.

Of course, if your tank is equipped with a riser, you will be able to reach it without having to dig or expose anything at all, so you will not have to worry about this.

Essentially, a riser is similar in appearance to a (most likely green) manhole cover in your garden.

These four suggestions will help you guarantee that your septic tank cleaning goes off without a hitch as smoothly as possible.

Upstate Septic Tank, LLC may also provide you with professional maintenance recommendations. Please do not hesitate to contact us whenever you want assistance with septic tank maintenance and cleaning.

WHAT HAPPENS IF YOU DON’T PUMP YOUR SEPTIC TANK?

By Admin on November 12, 2020 Your efforts to live as environmentally conscious as possible, as a responsible homeowner, are likely already underway, with practices such as recycling, composting, and purchasing energy-efficient equipment among your list of accomplishments. As a septic tank owner, you want to be sure that anything you put into your tank and septic field is causing the least amount of ground contamination as is reasonably practicable. Fortunately, there are a number of modest improvements you can do immediately to make your septic system even more ecologically friendly than it already is.

Have your septic tank inspected and pumped on a regular basis.
A bigger septic tank with only a couple of people living in your house, for example, will not require pumping as frequently as a smaller septic tank or as a septic tank that must manage the waste products of multiple family members will require.
When in doubt about how often to pump your septic tank, consult with a professional for advice.
In addition to locating and repairing any damage, a professional can ensure that the septic field is in good working order and that your septic tank is functional, large enough to handle your family’s waste, and not causing any unwanted pollution in nearby ground water.
Avoid flushing non-biodegradable items down the toilet or down the toilet.
Items that are not biodegradable are unable to properly decompose in the septic tank and might cause the system to get clogged.
In addition to causing issues in your house, septic system backups can damage ground water in the area surrounding your septic field.

Towels made of paper Products for feminine hygiene Grease or fats are used in cooking.

grinds from a cup of coffee Even if you have a trash disposal, the food scraps that you flush down the drain and bring into your septic system may cause unanticipated harm to your plumbing system.

Food scraps can enhance the amounts of nitrogen and phosphorus in the wastewater, which can disturb the natural bacterial balance of the septic tank, among other things.

Water conservation should be practiced.

Excess water consumption will interrupt the normal flow of wastewater from your house into your septic tank.

Limiting the amount of time you spend in the shower and turning off the faucet while brushing your teeth, as well as purchasing a smaller dishwasher and washing machine that use less water, are all simple strategies to reduce water use in your home.

The following are some basic steps you can take to make your septic system more ecologically friendly: save water, maintain your septic system and tank, and recycle wastewater. To get answers to any of your septic tank-related issues, get in touch with the experts at Upstate Septic Tank, LLC.

How to unclog your leach field

A SHOCK TREATMENT CAN SAVE YOU UP TO $150. The leach field, also known as a drain field, is the area where effluent from the septic tank is disposed of. In this stage of the septic system, a network of perforated PVC drain pipes, crushed stone, and a layer of unsaturated soil are combined to form a septic system. Gravity is generally responsible for the movement of wastewater from the septic tank to the leaching bed. Nevertheless, when the conditions do not permit the use of gravity to transport the wastewater to the leaching bed, a pumping station can be utilized to transport the wastewater to the leaching bed.

Final filtering is carried out by the presence of bacteria and other microorganisms that further purify the wastewater before it reaches the groundwater table.

It does, however, become clogged from time to time.

How is a leach field made?

It is critical that the leaching bed functions well in the wastewater treatment system, and if it does not, the entire system will be adversely affected. It is also critical to prevent structural problems from occurring in the first place by ensuring that the building is designed correctly. As a result, only fully licensed contractors are permitted to do such a project. But, first and foremost, you will need to conduct a percolation test as well as a comprehensive review by an engineering professional.

A quick percolation rate is seen in sandy soils; whereas, a sluggish percolation rate is found in clay soils.

In order for a soil to be considered excellent, its percolation rate should not be too high or too low.

If, on the other hand, it takes more than an hour for the water to settle, this indicates that the effluent is not infiltrating quickly enough, which might result in backflow difficulties.

Steps followed when building a leach field

The moment has come to start digging the trenches after all of the testing have been performed and the building plan has been finalized and approved by the project team. The number of trenches that will need to be built depends on the size of the septic tank and the volume of wastewater that will be released into the leaching field throughout the construction process. Each trench should have the same breadth as the others (approximately 3-4 feet). In addition, the ditches should have a modest downhill slope to them. Following the excavation of the trenches, they should be filled with crushed stone. The crushed stone bed should be at least one to one and a half inches thick and evenly distributed throughout the ditches. This procedure is critical because it enables for more effective drainage of the effluent under the perforated pipes
Nevertheless, it is not required. The perforated pipes are then laid on top of a bed of crushed stone to allow for proper drainage. Crushed stone is then placed on top of the perforated pipes to ensure that they are securely attached — enough to prevent them from moving or getting misaligned over time. A layer of crushed stone between 1 and 3 inches thick should enough.
Following that, a geotextile membrane is laid over the crushed stones. When the membrane is in place, soil or dirt cannot slip between the crushed stones and cause a blockage in the leaching bed. If you haven’t already, install a drain line from the septic tank to the leach field pipes. Finally, the trenches are filled with dirt to make them more level and to make the surface of the leach field more consistent in appearance. After that, you may cover the area with a covering of grass. And, at all costs, avoid planting anything else in or near this part of the yard.

How long does a septic leach field last?

Weeping beds should last at least 25 years if they are well-maintained, but they may live much longer or shorter depending on a variety of conditions. The majority of leaching fields collapse as a result of biological or hydraulic overstress. Hydraulic overload occurs when an excessive amount of water is discharged into the septic tank. Consequently, it is advised that duties such as washing be spread out throughout the course of the week rather than being completed in a single weekend session.

When an excessive amount of organic material enters the leaching field, this is referred to as biological overloading.

The only solid waste that should be disposed of in your septic system is toilet paper and human waste (feces).

Additional to this, we advocate the frequent use of biochemical additives to improve the overall efficiency and lifetime of the system. Because of the high activity of the bacterial flora in your system, Bio-Sol’sSepti +can help to avoid biological overload in your system.

What is clogging your leach field?

The leaching bed, like the septic tank, is not meant to survive indefinitely. All leaching fields will need to be replaced at some point in the future. However, with careful care and maintenance, your leaching bed should last for many years, if not for a lifetime. The leaching bed utilizes aerobic bacteria on the receiving soil to filter wastewater before it reaches the groundwater table, preventing groundwater contamination. These bacteria decompose organic materials and aid in the elimination of viruses as well as the reduction of nutrients in wastewater.

Clogging in the leaching bed, on the other hand, causes this process to be slowed down, resulting in unavoidable environmental contamination.

Biomat

During the wastewater treatment process, a black, gelatinous layer forms beneath the distribution pipes as the wastewater passes through the leach field. Rather than sludge, this layer is really a biomaterial sludge known as “biomat.” Because the biomat is waterproof, it significantly minimizes the amount of wastewater that percolates into the soil. In most cases, this biomat is formed of organic waste and anaerobic bacteria that have attached themselves to the soil or broken stone. The organic stuff in the effluent provides food for these bacteria.

Contrary to this, it aids in the further filtering of wastewater by reducing the rate of infiltration and retaining the organic matter before the water is allowed to reach the soil.
More black gelatinous sludge builds up in the trenches, the more difficult it will be for the wastewater to permeate and subsequently percolate into the soil as a result of the accumulation.
As soon as sewage begins to back up, it will always flow to the spot that provides the least amount of resistance.
When this occurs, the objective should not be to entirely remove the biomat from the environment.
It is important to note that good care and maintenance of the system will assist in preventing such an imbalance, which will save you a great deal of headache (like having to unclog your leach field).

How do you know if your leach field is failing?

It goes without saying that the most visible indicator of a failing leaching bed is when wastewater overflows and reaches the surface. The effluent will rise to the top of the soil or, in certain situations, will pour out the end of the trenches if the receiving soil in the leaching bed is unable to absorb any more water from the receiving soil.

The most common reason for the effluent to stop flowing is due to an excessive amount of biomatis being created. Check out the following indicators to determine if you need to unclog your leach field:.

Sluggish drains and toilets

Prior to the drain field failing altogether, you may notice that water is draining through the home at a slower rate. The drains will continue to function as long as there is enough space for the water to flow. On the other hand, it is possible that the water is draining more slowly. If you neglect this problem, which is caused by the leach field, the situation will deteriorate over time and become more serious. It is possible that the septic tank will become overflowing and that the water will be unable to penetrate into the earth at all.

Septic odors

Septic tank scents might be detected in the vicinity of the leaching area or within the house itself. Another sign that the leaching field is failing is the presence of rust. Due to the fact that it is so uncomfortable, this is perhaps one of the easiest indicators to recognize. To determine if you are experiencing the rotten egg smell, first check to see if there has been a buildup of organic material in the plumbing system. You may either use an ecologically friendly drain cleaner (such as SeptiDrain) or check your septic tank for abnormally high water levels to resolve the problem.

Sewage backing up in the house

In the case of clogged septic fields, water is returned to them, which causes the water level in the septic tank to rise. Water will back up through the hole in the septic tank or into your home if there isn’t enough room left in the tank. The leach field in your septic tank is almost certain to be the source of the problem if you see an excessively high water level in the tank. The water level in the septic tank should always be at or below the level of the drain pipe that connects the tank to the leaching field.

It is thus required to determine whether the soil has been saturated as a result of recent high rainfall or snowmelt, as well as to determine whether there has been a recent hydraulic overload.

However, if the situation persists, we can conclude that the leaching bed is no longer operating correctly (it is most likely clogged).

Greener and taller grass around the drainfield

A sign that your leach field is not operating correctly is the presence of higher, greener grass in the area where it’s supposed to be placed. When wastewater is unable to penetrate the soil, pressure can force it to rise to the surface, causing it to become visible. Because of the nutrients in the wastewater, the grass might grow more quickly and seem greener as a result of this.

Puddles of water in the yard

Puddles on the field may indicate that a hydraulic overload has forced water to come to the surface. If this is the case, contact the field superintendent immediately. When a leach field becomes blocked, the pressure builds up, forcing the water to rise. Large amounts of wastewater can practically pool on the ground when released into the environment. If the water smells like rotten eggs, avoid touching it and keep your children away from the area until the scent has been eliminated.

There have been instances where perforated pipes in the leach field have either disconnected or broken. If a large car has passed by, it is possible that this is what is causing the sewage to back up. Otherwise, a blockage is more likely to be the source of the problem.

Soil sinking or collapsing over the leachfield

The presence of excessively damp soil where the leaching bed is placed may also be an indicator that the leaching bed is no longer performing effectively, according to the manufacturer.

How to unclog your leach field?

When you find an issue with your leaching bed, you should make an attempt to fix it as quickly as possible. If this is not done, the condition may worsen and result in wastewater overflows. Those spills are potentially hazardous to both you and the environment. Also prohibited is the pollution of the environment, and local authorities may order you to replace your septic system if you fail to comply with the law. In addition to promoting the growth of biomat, as previously described, the discharge of organic particles into the leaching bed generates an imbalance in the natural water filtration system.

As a consequence, a waterproof biomaterial sludge is formed, and this sludge significantly reduces the rate of infiltration of wastewater into the receiving soil, which is abnormal.
Because of this, it is necessary to minimize the accumulation of organic matter in leaching fields and to reduce the thickness of the sludge layer that clogs the leaching fields.
However, the one offered by Bio-Sol is without a doubt the quickest, easiest, safest, and most ECONOMIC method available!
These shock treatments are 100 percent environmentally friendly (and hence safe), and they are simple to do on your own.
It is typically necessary to introduce a high concentration of these bacteria and enzymes into the leaching bed in order to break down the organic waste that has collected in the leaching bed and unclog the leach field.
The result is that your septic system is back in operating order!
The majority of the time, this occurs when a large truck passes by.
If this is the case, you should use a camera to evaluate the area to ensure that there is no structural damage.

How much does a new leach field cost?

Choosing to repair your leaching bed will almost certainly necessitate the replacement of your complete septic system as well. You will require a fresh percolation test as well as an appraisal by an engineer with appropriate qualifications. When using a standard septic system, you may expect to pay between $5,000 and $12,500 for the installation and maintenance. However, if you require the installation of a more sophisticated system, the cost of the replacement will be significantly higher (between $15,000 and $30,000).

As a result, we highly recommend you to attempt to resolve the problem first by selecting one of the alternative options that have been provided.

PROMOTION TO ASSIST YOU IN UNCLOGGING YOUR LEACH FIELD: By visiting our monthly specials page, you can receive a discount on a shock treatment. To save even more money, click here: SAVE UP TO 150$ ON A SHOCK TREATMENT WITH THIS PROMOTION.

Conclusion

A blocked leach field will jeopardize the integrity of the entire system. It can result in sewage backups in the house, septic smells, sewage leaking on the yard, and groundwater contamination, among other problems. Unclogging your leachfield with shock treatment can help you to avoid these and other problems associated with leachfield failure in the future. It is the injection of billions of bacteria and enzymes into the sewage system through the use of biological additives that is known as shock treatment.

This septic-safe solution from Bio-Sol is manufactured from bacteria and enzymes, and it will clear your leach field without harming the bacteria or enzymes in your system.