The average price of a concrete septic tank is between $720 and $2,050, a fiberglass tank ranges from $1,600 to $2,000, and a plastic tank costs $830 to $1,900.
Concrete Septic Tank Cost.
| Tank Size | Average Cost |
|---|---|
| 1,000 Gallon | $815 – $1,250 |
| 1,250 Gallon | $945 – $1,235 |
| 1,500 Gallon | $1,100 – $1,520 |
- When people want to build a precast concrete tank that can hold about 1,000 gallons can be a great choice for the system installation in the house with three bedrooms. The cost will be about $600-1,000. Drain Gravel The concrete septic tank cost is not the only thing that people should count on when installing the septic system in their household.
What is the cheapest septic system?
Conventional septic system These conventional septic systems are usually the most affordable, with an average cost of around $3,000.
What is the life expectancy of a concrete septic tank?
Inspectapedia estimates that a steel tank baffles will rust out in 15 to 20 years and may collapse if driven over, but a concrete tank will last 40 years or more as long as the wastewater is not acidic. It’s important to consider the life expectancy of a drain-field, too.
How much does a 2000 gallon concrete septic tank weigh?
Answer: Our 2000 gallon concrete septic tanks weigh approximately 16,000 lbs., but weight varies between precast manufacturers depending on the dimensions, wall thickness, floor & top thickness, & rebar reinforcement.
Can you have a septic tank without a leach field?
The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.
Are concrete septic tanks better than plastic?
Cement Septic tanks are very durable than plastic tanks and, if kept properly, can have extended longevity. With regular draining and proper maintenance, a cement septic tank can last for up to 40 years. Cement septic tanks are resistant to environmental changes such as tree roots or changing soil conditions.
How often should a 1000 gallon septic tank be pumped?
For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.
Does heavy rain affect septic tank?
It is common to have a septic back up after or even during a heavy rain. Significant rainfall can quickly flood the ground around the soil absorption area (drainfield) leaving it saturated, making it impossible for water to flow out of your septic system.
What sizes are concrete septic tanks?
What sizes do concrete septic tanks come in? Standard tank sizes are 1000 gallon, 1250 gallon, and 1500 gallons nationwide.
What does a 500 gallon concrete septic tank weigh?
500 Gallon Siphon Tank Package Height to center line of inlet: 48” Height to center line of outlet: 48” Weight: 5,000 lbs.
How thick is a concrete septic tank?
The exterior walls of the septic tank are made of concrete, normally 4 inches thick. The concrete is either a minimum of 4,000 or 5,000 PSI concrete. A 1,200-gallon tank can weight as much as 8,000 pounds, so these are not items a homeowner can install on his own.
What is the smallest concrete septic tank?
Septic Tank Sizes Septic tanks come in varying sizes, and you can get tanks that are smaller than 1000 gallon, but we recommend that you stick with 1000 square feet as the minimum size tank. Several states now require 1000 gallon tanks as the minimum size requirement.
Learn how much it costs to Install a Septic Tank.
Septic tanks range in price from $3,157 to $10,367, or an average of $6,743. Installation of a conventional 1,000-gallon tank for a three-bedroom home might cost anywhere from $2,100 and $5,000. Materials range in price from $600 to $2,500, without labor. A comprehensive septic system, which includes a leach field (also known as a drain field), tank, and plumbing, can cost between $10,000 and $25,000 to install. A leach field installation might cost anywhere from $5,000 to $20,000, depending on the kind.
In the end, the cost of installing a septic tank is determined by the kind of system, the materials used, and the size of the tank.
This course will teach you about the several sorts of settings, such as conventional, drip irrigation, mound irrigation, evapotranspiration, recirculating sand, constructed wetland, and chambered irrigation.
Septic System Cost Estimator
Let’s run some numbers to see what the costs are. What part of the world are you in? What part of the world are you in?
| National Average | $6,743 |
| Typical Range | $3,157 – $10,367 |
| Low End – High End | $450 – $20,000 |
The cost information in this report is based on real project costs provided by 943 HomeAdvisor users.
New Septic System Cost
Most tanks and systems cost between $2,000 and $10,000 to install a new typical anaerobic septic system. Aerobic systems range in price from $8,000 to $20,000. Depending on the size of your property, the composition of the soil, and the level of the water table, you may even have to pay an extra $10,000 or more for an alternative, specialized drain or leach field. Septic systems are composed of three major components:
- Septic tank: Either anaerobic (requiring no oxygen) or aerobic (requiring oxygen but more complicated but more efficient)
- Water runs to a leach field after it has been cleaned and separated in the septic tank, where it will naturally drain through sand, gravel, and soil in a cleaning process before reaching the water table
- Water table: Plumbing: A drainpipe to the tank, followed by another branching pipe to your field will be required.
Optional components include the following:
- Some types of systems use a dose or pump tank, which pumps wastewater up into mounded or elevated leach fields and recycles the water in some cases. Pump for aeration: If your aquarium is equipped with an aerobic system, you’ll want an aerator to force oxygen into the tank.
Find Local Septic Tank Installers
The installation of a traditional anaerobic system typically costs between $3,000 and $8,000 on average. Anaerobic systems are often less expensive to build than aerobic systems, which are more complicated. However, because they are less effective at cleaning the tank, you will need a bigger leach field to accommodate the increased burden. An anaerobic septic system is a very basic system that consists of a pipe that runs from the home to the tank and a branching pipe that runs from the tank to the drain field, among other components.
Aerobic Septic System Cost
Aerobic systems, which are those that require oxygen to work properly, cost on average between $10,000 and $20,000 per system. If you’re moving from anaerobic to aerobic fermentation, you’ll almost certainly need a second tank, but the conversion will only cost you $5,000 to $10,000. Aerobic systems break down waste more effectively in the tank than anaerobic systems, allowing you to use a smaller drain field in many cases – which is ideal for houses with limited space. An aerobic wastewater system is a wastewater system that depends on aerobic bacteria (bacteria that thrive in the presence of oxygen) to break down trash in the tank.
You’ll need an aerator as well as an electrical circuit that connects to the system to complete the setup. Small, mounded, or speciality fields may necessitate the addition of a dose or pump tank to assist in pushing effluent (sewage or wastewater) upward or out in batches.
Get Quotes From Local Septic Tank Pros
Beyond the tank and leach field, there will be a few more costs to consider when creating your budget for the project. You may already have some of these costs included in your total project pricing, so make sure to get line-item prices on your estimate.
- Excavation costs $1,200–$4,500
- Building permits cost $400–$2,000
- And a perc test costs $700–$1,300. Labor costs range from $1,500 to $4,000
- The cost of septic tank material ranges between $500 and $2,000.
- Plastic and polymer materials cost $500–$2,500
- Concrete costs $700–$2,000
- And fiberglass costs $1,200–$2,000.
- 500: $500–$900
- 750: $700–$1,200
- 1,000: $900–$1,500
- 1,200: $1,200–$1,600
- 1,500: $1,500–$2,500
- 2,000: $3,000–$4,000
- 3,000: $4,500–$6,000
- 5,000+: $7,500–$14,000
- 500: $500–$900
- 1,200: $1,200–$1,
Leach Field Cost
Installing a leach or drain field, which is a component of your septic system, can cost anywhere from $3,000 to $15,000 in total. The cost of a typical drain field ranges from $2,000 to $10,000. The drain field, also known as the leach field, is the component of the septic system that is responsible for returning wastewater to the soil. Most of the time, a flooded area in the yard or a strong stink of sewage on the property is the first symptom of a problem with the drainfield. It is possible that you may require further treatment for blocked or flooded fields, which would increase the cost of the drain field repair from $10,000 to $50,000.
Alternative Septic Systems Cost
When you have a tiny property, a high water table, high bedrock, poor soil, or just wish to utilize less space, an alternate septic system is a good choice.
Mound Septic System Cost
Installing a mound septic system can cost between $10,000 and $20,000 dollars. In places with high water tables, thin soil depths, or shallow bedrock, this is the most costly system to build; yet, it is frequently required. In order to create a drain field, it uses a raised mound of sand rather than digging into the soil. Its extra cost is a result of both the additional technology required to pump sewage upward into the mound and the materials and labor required to construct the mound in the first place.
Recirculating Sand Filter Septic System Cost
Sand filter septic systems range in price from $7,500 to $18,500. They can be built above or below ground depending on the situation. In order to disperse the wastewater in the ground, they employ a pump chamber to force the wastewater through a sand filter. The liner of the filter box is normally made of PVC. This is accomplished by pumping the effluent through the sand and returning it to the pump tank, where it is then disseminated throughout the ground.
Drip Septic System Cost
Drip systems range in price from $8,000 to $18,000, depending on the size and complexity. They operate in the same way as previous systems, with the exception that they employ extensive drip tubing and a dosage mechanism. They deliver lower dosages over a shorter period of time, which is particularly effective at shallow soil depths. This method is more expensive than a standard system since it requires a dosage tank, a pump, and electrical power to operate.
Evapotranspiration System
Evapotranspiration systems range in price from $10,000 to $15,000 per system. In order to allow the liquid to evaporate from the top of an open-air tank, they employ a novel drain field configuration. They’re only usable in dry, arid areas with little rain or snow, thus they’re not recommended.
Built Wetland System
Built-in wetland systems range in price from $8,000 to $15,000, with the cost increasing if an aerobic tank is included. They are designed to simulate the natural cleaning process observed in wetland ecosystems.
After traveling through a wetland tank, where it is treated by microorganisms, plants, and bacteria, it is returned to the soil. The waste also has the effect of assisting the growth of wetland plants and the population of microbes.
Chambered System
Installation of chambered systems ranges from $5,000 to $12,000 dollars. They employ plastic perforated chambers surrounding pipes, which are frequently laid in sand, to keep them cool. Gravel is no longer required as a result of this. They are quick and simple to install, but they are more subject to crushing pressures, such as those caused by automobiles.
Septic Tank Replacement Cost
The cost of replacing a septic tank ranges from $3,000 to $10,000. From 30 to 40 years, you may anticipate your system to serve you well. The system may crack or corrode as a result of the failure and the resulting contamination of groundwater with toxic waste is an issue. When this occurs, the well water may get polluted, the yard may become marshy, and the septic system may become inoperable or fail completely. Here’s a breakdown of the various components of a septic tank, along with an estimate of their usual costs: Replacement of a septic tank pump costs between $800 and $1,400.
Replacement of the filter costs between $230 and $280.
Drain Field Replacement:$7,000 When replacing an aerobic system, talk to your service expert about the advantages, disadvantages, and expenses of upgrading to a more efficient aerobic system.
Septic System Maintenance Costs
It is essential that you pump and clean your septic tank at least once a year. In addition, you should get it examined at least once every three years. The proper maintenance of your septic tank will save you money in the long term, and it will also help you avoid potentially hazardous situations. The Environmental Protection Agency (EPA) suggests the following steps to keep your septic system in good working order:
Inspect and Pump Your Septic Frequently
Typically, the cost of septic tank pumping runs from $300 to $550, or around $0.30 per gallon – most septic tanks have capacities between 600 and 2,000 gallons. Every three to five years, you should have your septic tank inspected and pumped by a professional. If you have a bigger home (with more than three bedrooms) and you tend to use a lot of water, you should try to get it pumped at least once every three years. An checkup of a septic system might cost anything from $100 to $900. Your septic inspector will do a visual inspection of the system.
- Initial inspection costs between $250 and $500
- Annual inspection costs between $100 and $150
- And camera inspection costs between $250 and $900.
Use Household Water Efficiently
A toilet that leaks or runs continuously might waste as much as 200 gallons of water per day, although the average family consumes just 70 gallons of water. Take, for example, high-efficiency toilets, which consume 1.6 gallons or less of water every flush or less. The use of new, high-efficiency washing machines and showerheads can also help to reduce water waste, which will relieve the load on your septic system.
Properly Dispose of Your Waste
Your septic system is responsible for disposing of everything that goes down your drains and toilets.
One easy rule of thumb is to never flush anything down the toilet other than human waste and toilet paper, unless it is absolutely necessary. That implies you should never flush the following items down the toilet or drop them down the sink drain:
- Cooking grease or oil, baby wipes or wet wipes, dental floss, diapers, feminine hygiene products, cigarettes, cat litter, and paper towels are all examples of items that fall into this category.
Maintain Your Drainfield
Cigarettes, cat litter, paper towels, baby wipes, dental floss, diapers, feminine hygiene items, cooking grease or oil, baby wipes or wet wipes
- Never park or drive your vehicle on your drainfield. Don’t ever put trees near your drainage system. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage equipment
Get in Touch With Septic Tank Installers Near You
A septic tank or septic pump tank can range in price from $350 to $14,000, depending on the material used and the size of the tank. In most home situations, you won’t have to spend more than $3,000 on the tank’s actual construction. The majority of big, high-priced units are intended for use in apartment buildings or as part of a communal sewage system.
Concrete Septic Tank Cost
Concrete tanks range in price from $700 to $2,000. The total cost of installation ranges from $2,300 to $6,500. They’re one of the most often seen forms of installation. Despite the fact that they are vulnerable to cracking and separation, they are often resilient for several decades. It’s critical to have it carefully inspected on a regular basis for cracks and runoff, among other things. Inspections and frequent cleanings will assist to extend its useful life. Your professional can tell you how frequently you should get it inspected, but it’s normally every one to three years.
Plastic and Poly Septic Tank Prices
Septic tanks made of plastic range in price from $500 to $2,500 on average, not including installation costs. Plastic is a long-lasting, lightweight, and reasonably priced building material. They do not break as easily as concrete and do not rust. Because of their small weight, plastics are more susceptible to harm during the installation process.
Fiberglass Septic Tank Prices
Fiberglass septic tanks are typically priced between $1,200 and $2,000, not including installation. Fiberglass does not split or rust readily, but it is prone to damage during the installation process, much like plastic. However, because of its lighter weight, it is more prone to structural damage, and the tanks themselves can move in the soil.
Steel
It’s unlikely that you’ll ever see a new steel tank constructed. They will rust or corrode with time, no matter how well-made they are at the time. As a result, they are not permitted by many municipal construction rules, and you will only encounter them in existing installations. Steel is not a long-lasting material in the earth, and it is the least preferred.
Labor Costs to Install a Septic System
The cost of labor accounts for 50 percent to 70 percent of your overall expenses. Labor is typically more expensive than the tank itself in a normal installation, making it the most expensive option. For example, while the size required for a 3 to 4-bedroom home may cost between $600 and $1,100, the labor to install it might cost anywhere between $1,500 and $4,000.
Compare Quotes From Local Pros
Here is a breakdown of how much septic tanks cost in different parts of the country. Massachusetts:$9,700 California:$4,500 Florida:$5,300 Texas:$8,000 $5,600 in New York City Colorado:$7,800 Idaho:$10,000
DIY vs. Hire a Septic System Pro
The installation of a septic system is a time-consuming operation. An incorrectly fitted unit can result in water contamination, structural damage to the property, and the need for costly repairs.
In addition, an unpermitted installation might make it harder to sell and insure a property when it is completed. Make a point of interviewing at least three pros before making a final decision. Contact a septic tank installation in your area now for a free quote on your job.
FAQs
A septic tank has an average lifespan of 20 to 30 years, however it may live anywhere from 14 to 40 years, depending on the following factors:
- What it is made of is a mystery. Concrete tends to require more care, but commercial-grade fiberglass and plastic are known to survive for decades in most environments. It’s amazing how well you’ve kept it up. Every one to three years, have your system inspected and pumped out
- Every three to five years, have it pumped out. It will depend on whether or not it gets vehicle traffic over the leach field. Driving over the leach field compresses it, which increases the likelihood of it failing. The soil’s chemical makeup is important. The length of time it may endure varies depending on the soil type and depth.
What are the signs I need a new septic tank?
There are a few indicators that it is time to replace your septic tank. These are some examples: If you smell sewage, you may have a solid waste problem in your septic tank that has to be dealt with immediately. Standing water: If there is no clear explanation for standing water, such as a significant rainstorm, it is possible that you have an oversaturated drain field, a damaged pipe, or a faulty septic system. A clogged septic tank will cause pipes to drain more slowly than they would otherwise be.
Construction on your home or the addition of more occupants will have an impact on your septic system.
pollution of nearby water: A septic tank leak can result in wastewater contamination, which can deposit nitrate, nitrite, or coliform bacteria in water sources around your property as a result of the leak.
Old age: If your septic system has reached the end of its useful life, it is time to replace it.
Does homeowners insurance cover septic systems?
Many unforeseen and abrupt repairs to septic tanks are covered by homeowners’ insurance policies. They do not, however, often cover harm caused by a failure to perform routine maintenance. Make certain that you are pumping and cleaning it on a yearly basis.
How much do septic system repairs cost?
Repairing a septic system can cost anything from $600 to $3,000. Most tank repairs and replacement parts cost less than $1500 for each type of repair or replacement part mentioned below. Leach fields range in price from $2,000 to $20,000.
- Tank Pumps cost between $800 and $1,500. A septic tank that is placed below the drain field may necessitate the installation of a pump to transport wastewater to the drain field. Pumping costs between $300 and $600 per year. Pumping is required to remove solid waste from even a perfectly functioning system every two or three years, even if it is in good working order. Tank Lids cost between $100 and $300 to purchase and install. If you purchase the lid and attach it yourself, it will cost you between $50 and $150
- Tank Lid Risers range in price from $300 to $1,000. Deeply submerged tanks can have their lids raised to the surface by using these devices.
Still Have Questions About Septic Tanks?
The cost of installing a modest septic system can range from $2,910 to $18,600 depending on the size of the system. Get quotations from as many as three professionals! Enter your zip code below to get matched with top-rated professionals in your area. A septic system is far superior than an outhouse, whether you’re building a garage apartment or even a cottage off the grid. Due to the availability of more affordable systems, there is no need to purchase more than you require. Costs might vary significantly depending on the size of your tank, the nature of your soil, and the sort of system you choose.
How Much Does a Small Septic Tank System Cost by the Gallon?
You may choose between two different tank sizes when installing a septic system. The smallest tank size you’re likely to find is 750-gallon, which would fit one to two bedrooms. You can also choose between a 1,000-gallon system, which will support two to four bedrooms. Be aware that certain towns demand a minimum tank capacity of 1,000 gallons, so be sure to check the regulations in your area.The following is an example of common prices for septic systems, broken down by tank size:
- You may choose between two different tank sizes when installing a septic system. The smallest tank size you’re likely to find is 750 gallons, which would suit one to two bedrooms. You can also choose between a 1,000 gallons system, which will support two to four bedrooms. Be aware that some towns demand a minimum tank capacity of 1,000 gallons, so be careful to check the regulations in your area.Here is a breakdown of average expenses for septic systems based on tank size:
How Much Does It Cost to Install a Small Septic System Yourself?
If you’re wanting to build a septic system, the smallest tank size you’re likely to find is 750-gallon, which will suit one to two bedrooms.
You may also choose a 1,000-gallon system, which would support two to four bedrooms. Keep in mind that certain towns demand a minimum tank capacity of 1,000 gallons, so be sure to check the regulations in your area.The following are some common expenses for septic systems, broken down by tank size:
Small Septic System Cost Breakdown
Conventional septic systems will require a tank, plumbing, and a leach (or drain) field in addition to the rest of the system components. Additional costs to consider include excavation, soil testing, and building permits. The following is a breakdown of what you would be expected to pay.
Small Septic Tank
The tank itself will cost you anywhere from $750 and $1,500, depending on its size and configuration. As previously stated, some municipalities need a minimum of 1,000 gallons, so be sure to verify your local regulations. Here are some rough size ranges to get you started:
- 750 gallons cost between $700 and $1200
- 1,000 litres cost between $900 and $1500.
Leach Field
After the wastewater has been sorted and processed in the septic tank, it is sent to the aleach field for disposal. Here, it drains through soil, sand, and gravel, where it is naturally cleansed before reaching the groundwater table, where it is collected. Prices for leach fields can vary greatly depending on the kind and size of your septic system, as well as the soil makeup of your property. Here are some preliminary estimations based on the size of the object:
- $800–$19,000 per 750-gallon container
- $1,080–$12,000 per 1,000-gallon container
Excavation
Again, the size of your tank and the nature of the soil will have an impact on your excavation expenditures. According on the size of your little septic tank, you might expect to spend the following:
Perc Test
A perc test will normally cost between $750 and $1,300 in labor and materials. This test will measure the ground’s ability to absorb and filter water, as well as its ability to retain moisture. You will be required to provide documentation of this evaluation for both new installations and repairs.
Building Permits
Most municipalities will charge a price for a construction permit, which can range from $400 to $2,000 in most cases. The price will vary depending on the restrictions in your location. Anne – Adobe Stock (stock.adobe.com)
How Much Does a Small Septic System Cost by Type?
Concrete septic tanks, polyethylene septic tanks, and fiberglass septic tanks are the three most common forms. Concrete is a typical material that may survive for several decades, while it is prone to cracking and separating during the process. Plastic and fiberglass are more robust, but they are also more prone to damage during the installation process than other materials. Below are some general pricing ranges to keep in mind for each of the options.
750-Gallon Septic Tank System
- Concrete costs between $2,860 and $13,900
- Plastic/poly costs between $2,660 and $13,900
- And fiberglass costs between $3,360 and $13,900.
1,000-Gallon Septic Tank System
- $2,860 to $13,900 for concrete, $2,660 to $13,900 for plastic/polyethylene, and $3,360 to $13,900 for fiberglass
How Much Does a Small Septic System Cost by Style?
Traditional septic systems are divided into two categories: anaerobic and aerobic systems. Septic systems that are anaerobic in nature are the most frequent, however aerobic septic systems are significantly more efficient (and costly).
Anaerobic Septic System
A modest anaerobic septic system will cost you between $3,000 and $8,000, depending on its size. It is dependent on anaerobic bacteria, which are microorganisms that do not require oxygen to survive. During their time in the septic tank, these bacteria work to break down waste before it can be further digested in the soil.
Aerobic Septic System
The cost of an aerobic septic system can range from $10,000 to $18,600 dollars.
These systems make advantage of aerobic microorganisms, which thrive in the presence of oxygen, to break down waste more effectively. While this system necessitates a larger budget, it is more efficient at breaking down waste in the tank, resulting in lower leach field expenditures.
What Factors Influence the Cost of a Septic Tank System?
The leach field for your septic system has the greatest influence on your entire cost since costs vary greatly depending on the size of the field required and the kind of soil you have. Here’s a list of all the variables that might influence the price of your tiny septic system:
- The nature of the soil
- The size and kind of the septic tank
- The dimensions of the leach field
- Expenses for excavation and other types of work in your region Obtaining all of the appropriate building approvals
FAQs About Septic Systems
The cost of having your small septic tank pumped is between $290 and $530 dollars. Prices vary depending on the size of the tank and the amount of time it is used. Get in touch with a septic tank cleaner in your area for an accurate quotation.
How do you know when to pump your septic tank?
It is a frequent misconception concerning septic systems that the tank must be pumped as soon as it “appeals” to be full, despite the fact that wastewater will ultimately drain onto the leach field. Instead, it is preferable to count the number of solids that have collected. An aseptic maintenance expert in your area can perform this test to determine whether or not pumping is required.
How much does it cost to repair a septic tank?
The typical cost of repairing a septic tank is between $500 and $2,600, although prices will vary depending on the extent of the repairs required. For an exact cost estimate, speak with a septic tank repair specialist in your neighborhood.
How Much Do Septic Tanks Cost?
As an alternative to hooking up your home to a municipal sewer system, you may install a septic system on your own, which is composed of a container placed underground on your land that retains and processes the water and waste that escapes your home through plumbing pipes. Septic tanks should only be installed by qualified specialists, whether you’re building a new house and need a septic system installed or replacing an existing septic system. Because of the project’s intricacy and magnitude, heavy machinery, precise excavating, and plumbing hookups are required, all of which might be devastating if not completed correctly.
- Properties in areas where the earth floods often, for example, would experience a high frequency of septic issues.
- After that, a contractor must excavate in the vicinity of the tank and drain field in preparation for installation, which will involve plumbing connections to the residence.
- Septic system installation needs meticulous design, the knowledge of a professional, and at the very least a few thousand dollars to be completed properly.
- What Is the Average Cost of a Septic Tank?
- It is possible that you have already attempted to repair your septic tank or system, therefore this fee will be in addition to your original investment.
- Glenn Gallas, vice president of operations at Mr.
- It is possible that you will spend even more depending on the size and location of your property, as well as the size and substance of your tank and the type of septic system you want.
A septic tank can be constructed from four different types of materials: —Concrete.
—Plastic.
—Fiberglass.
—Steel.
Steel is the least popular building material on the market today.
One thousand gallon tank for a three-bedroom house with less than 2,500 square feet.
Septic tanks under 1,000 gallons in capacity are expected to cost between $600 and $1,000, according to HomeAdvisor, while tanks of 1,200 gallons or above in capacity are expected to cost between $1,200 and $1,600, according to the same source.
Septic tank installation will be delayed if there is a lot of rain that soaks the soil, according to Michael DeCosta, director of branch operations for mergers and acquisitions at Wind River Environmental, a mechanical systems contracting company that installs and repairs septic tanks, among other specialties.
- “If you go to Florida or Cape Cod, where there’s a lot of sand, such installations take a day,” adds DeCosta, who is headquartered in the Boston region.
- When it comes to designing a septic system, DeCosta explains that in many cases the local planning agency or board of health will provide a list of qualified engineers from which to pick.
- The blueprints may then be sent to multiple septic installers for price and assistance, DeCosta explains.
- The overall cost of your septic system installation varies depending on the size of your home, the size of your land, the proximity to a floodplain, the soil, the type of tank material you select, and a variety of other factors.
- If you’re planning to replace any element of your present septic system, a septic installation specialist will most likely want to come out to your site to take measurements and search for problems before proceeding.
- Multiple professional visits for estimates may appear to be excessive, but the information you acquire from each interaction may help you determine which firm offers the best materials and timing for your project, rather than simply choosing the lowest price.
- Listed below are a few of the components that contribute to the overall cost of a septic system installation or the cost of replacing an existing tank: • Sewer line • Distribution box • Field lines • Sewer line — Drainage field, also known as a leach field.
— The tank’s lid.
— Tank top.
In the event that only one or two components of the system appear to be causing the problem, Gallas says that the sewage line, septic tank, distribution box, and field lines can all be replaced independently.
Maintenance, on the other hand, is essential since little faults can accumulate over time and generate greater ones.
Depending on the expert, a septic tank should only need to be drained every three to five years.
If you discover a problem with your plumbing or observe water backing up into your house, call a plumber to come out and analyze the problem for you.
According to HomeAdvisor, a plumber’s hourly rate typically ranges from $45 and $200, depending on where you reside in the country.
More from the news organization U.S. News & World Report What Is That Strange Smell in My Home? 15 Mudroom Design Ideas for Your Residence Choose Energy-Efficient Windows for Your Home Using This Guide What Is the Average Cost of a Septic Tank? The article first published on usnews.com.
More from WTOP
Asked in the following category: General The most recent update was on the 4th of June, 2020. The majority of septic tanks are constructed of concrete, although they can also be constructed of steel, fiberglass, or polyethylene. A 1,000-gallon precast concrete tank, which is sufficient for a three-bedroom house, typically costs between $600 and $1,000. Septic tank costs can range from as little as $600 to as much as $1,500. Plastic septic tanks ranging in size from 750gallons to 1,500gallons cost between $500 and $1500.
- Also Know how much a 1250 gallon concrete septic tank costs and how to get one.
- In addition to the costs listed above, how much does it cost to install a septic system?
- The average cost of a simple septic system for a three-bedroom home is $3,918; however, the majority of homeowners pay between $3,280 and $5,040.
- Which is preferable: a concrete or a plastic sewage treatment system?
- Plastic septic tanks are entirely waterproof and corrosion-resistant, making them an excellent choice for residential use.
- Concrete septic tanks are extremely long-lasting and can last for several decades if they are properly cared for.
Septic Tank Installation and Replacement Cost
The typical cost in the United States ranges from $500 to $5,000. The national average cost of a septic tank installation or the cost of replacing an outdated septic system is dependent on a number of different variables.
| Septic Tank Installation | Average Costs |
|---|---|
| National Minimum Cost | $500 |
| National Maximum Cost | $5000 |
| National Average Cost | $1500 |
According to the Environmental Protection Agency, one in every five residences in the United States relies on a septic system for wastewater management (EPA). In the case of septic systems, you may have a septic system for your home alone, or you may be connected to a communal system that services a small number of homes. Untreated wastewater created by a house or company is treated on site by a septic system, which is an on-site treatment system. Sewage lines convey wastewater from your shower, toilet, sinks, clothes washer, and trash disposal away from your home and into a septic tank buried in your yard.
Solids are separated from floatable debris in the septic tank, and the leftover liquid drains from the tank through a series of perforated tubes and onto a drain field or leach field after being separated in the tank.
The usage of septic systems is popular in rural regions that do not have access to a centralized municipal sewer system.
Tank capacity ranges from less than 1,000 gallons to more than 2,000 gallons, with the size of the tank determined by the quantity of water you consume on a daily basis.
Condos, apartments, residences, business spaces, and other types of structures might benefit from septic system installation or replacement services.
What’s in this cost guide?
- Soil type
- Tank size and kind
- Equipment
- Installation
- Maintenance
- Lift station
- And more. Septic systems that are not conventional
- How septic tanks function
- Signs that you need to upgrade your system
- How to employ a professional
Alternative septic systems
Alternative techniques are particularly effective on steep locations, highly rocky land, or poor soil. Among the options available are aerobic septic systems, mound septic systems, raised-bed septic systems, and others. The cost of a septic system installation or replacement may be greater or cheaper than the average depending on the area and kind of system. Locate the most qualified septic system consultant for your project needs. Zip code must be entered correctly.
Signs you need a new system
Anyone would not want sewage water rising up through their front yard on one of the hottest days of the summer season (or even on the coldest day of winter). Waterborne pathogens such as protozoa, bacteria (such as E. coli), and viruses may be spread through fecal matter, making wastewater not just stinking and disgusting, but also potentially deadly. It is possible for unclean wastewater to drain through the soil and pollute the water you and your friends and neighbors drink if your septic system is leaky, overwhelmed, or otherwise compromised.
Knowing what indicators to look for might help you catch an issue before it becomes a major problem.
This includes having your septic tank pumped out by a professional every three to five years.
Other indicators may indicate that it is necessary to contact a septic system specialist as soon as possible to either repair or replace the system.
Septic Tank Installation and Pricing
To process and dispose of waste, a septic system has an underground septic tank constructed of plastic, concrete, fiberglass, or other material that is located beneath the earth. Designed to provide a customized wastewater treatment solution for business and residential locations, this system may be installed anywhere. Although it is possible to construct a septic tank on your own, we recommend that you hire a professional to do it owing to the amount of skill and specific equipment required.
In this post, we’ll go over the several types of septic systems that are accessible to homeowners, as well as the procedure and costs associated with installing one.
Who Needs a Septic Tank?
For the most part, in densely populated areas of the nation, a home’s plumbing system is directly connected to the municipal sewer system. Because municipal sewer lines are not readily available in more rural regions, sewage must be treated in a septic tank. If you’re moving into a newly constructed house or onto land that doesn’t already have a septic tank, you’ll be responsible for putting in a septic system on your own.
How to Prepare for Your Septic Tank Installation
Here are a few pointers to keep in mind to make sure your septic tank installation goes as smoothly as possible.
Receive Multiple Estimates
Receiving quotations from licensed septic tank installers and reading reviews about each firm using trustworthy, third-party customer evaluations should be done before any excavation or signing of any paperwork is done. Examine your options for a contractor and make sure they have the appropriate insurance and license, as well as the ability to include critical preparations such as excavation and drain field testing in their quotation.
Test the Soil and Obtain a Permit
For septic systems to function properly, permeable soil surrounding the tank must absorb and naturally handle liquid waste, ensuring that it does not pollute runoff water or seep into the groundwater. The drain or leach field is the name given to this region. Before establishing a septic tank, you are required by law to do a percolation test, sometimes known as a “perc” test. This test indicates that the soil fits the specifications established by the city and the local health agency. In most cases, suitable levels of permeable materials, such as sand or gravel, are necessary in a soil’s composition.
Note: If you wish to install a septic tank on your property, you must first ensure that the ground passes the percolation test.
Plan for Excavation
Excavation of the vast quantity of land required for a septic tank necessitates the use of heavy machinery. If you are presently residing on the property, be careful to account for landscaping fees to repair any damage that may have occurred during the excavation process. Plan the excavation for your new home at a period when it will have the least influence on the construction process if you are constructing a new home. Typically, this occurs before to the paving of roads and walkways, but after the basic structure of the home has been constructed and erected.
The Cost of Installing a Septic Tank
There are a few installation charges and additional expenditures connected with constructing a new septic system, ranging from a percolation test to emptying the septic tank and everything in between.
Percolation Test
A percolation test can range in price from $250 to $1,000, depending on the area of the property and the soil characteristics that are being tested.
Ordinarily, specialists will only excavate a small number of holes in the intended leach field region; however, if a land study is required to identify where to excavate, the cost of your test may rise.
Building Permit Application
A permit will be required if you want to install a septic tank on your property. State-by-state variations in permit prices exist, however they are normally priced around $200 and must be renewed every few years on average.
Excavation and Installation
When you have passed a percolation test and obtained a building permit, your septic tank is ready to be professionally placed. The cost of a new septic system is determined by the size of your home, the kind of system you choose, and the material used in your septic tank. The following is a list of the many treatment methods and storage tanks that are now available, as well as the normal pricing associated with each.
Types of Septic Tank Systems
Septic system that is used in the traditional sense Traditionally, a septic system relies on gravity to transport waste from the home into the septic tank. Solid trash settles at the bottom of the sewage treatment plant, while liquid sewage rises to the top. Whenever the amount of liquid sewage increases over the outflow pipe, the liquid waste is discharged into the drain field, where it continues to disintegrate. This type of traditional septic system is generally the most economical, with an average cost of roughly $3,000 on the market today.
Drain fields for alternative systems require less land than conventional systems and discharge cleaner effluent.
Septic system that has been engineered A poorly developed soil or a property placed on an uphill slope need the installation of an engineered septic system, which is the most difficult to install.
It is necessary to pump the liquid waste onto a leach field, rather than depending on gravity to drain it, in order to ensure that it is equally dispersed across the land.
Types of Septic Tanks
- Concrete septic tanks are long-lasting and rust-proof, but they are difficult to repair if they are damaged. It is possible that concrete tanks will cost up to $2,000 depending on their size. Plastic —While plastic tanks are cost-effective, they are also susceptible to damage. They are around $1,200 in price. Fiberglass —While fiberglass septic tanks are more durable than their plastic counterparts, they are susceptible to shifting or displacement if the water table rises to an excessive level. Depending on the model, these tanks may cost up to $2,000
More information may be found at: Septic Warranty Coverage and Costs.
Using Your Septic Tank
It is important to maintain the area around your new septic tank’s drain field and to frequently check your tank using the lids included with it. Never use a trash disposal in conjunction with your septic tank since it might cause the system to clog. Additionally, avoid driving over the land where your septic tank is located or putting heavy gear on top of your septic tank or drain field to prevent damage. Most of the time, after five years of septic system use, you’ll need to arrange a cleaning and pumping of the system.
Consequently, there will be no accumulation of solid waste that will leach into the surrounding soil or groundwater. Send an email to our Reviews Team [email protected] if you have any comments or questions regarding this post.
How Much Does a Septic System Cost?
| Medium: Averages $2,000-$5,000; Runs $4,000-$12,000 in Higher Cost Areas | Enhanced System: $10,000-$20,000+ |
- The cost of installing or rebuilding a traditional septic system (including the tank) is from $2,000 to $5,000 in the Midwest, but can range from $4,000 to $12,000 or more in locations with higher material and labor costs. Septic systems that are designed, engineered-like or alternative septic systems, such as mounds, soil/peat filters, aerobic systems, and/or artificial wetlands, can cost $10,000 to $20,000 or more, according to the Rhode Island Regional Water Quality Program. These alternative septic systems perform better than the conventional technique in areas with high groundwater levels or soil that is slowly or fast percolating, as well as in areas near drinking water supplies, wetlands, coastal ponds, or other water resources. Simply installing a septic tank will cost between $500 and $1,800 based on its size (varying from 300 to 1,000 gallons) and kind. It costs an additional $100-$200 to purchase piping and other necessary supplies
- New Mexico State University gives an overview of the septic tank installation process. Many locations, however, require that a septic system be planned and constructed by experienced and licensed experts
- For more information, contact your local or state sanitation agency.
Related articles:Septic Tank Cleaning,Sewer Line Replacement,Replacing Copper Pipes What should be included:
- It is necessary to employ Septic systems when sewage treatment plants are not accessible, which is typically the case in rural or suburban areas with big lots. Essentially, a septic tank is a huge, underground, waterproof container that can be constructed of concrete, fiberglass, or plastic (polyethylene). An explanation of how septic systems function and where they might be utilized can be found at the North Carolina State University Ag Extension
- Installing or replacing a septic system might take anything from a few days to a week or more. The procedure entails substantial excavating, which is frequently accomplished using powerful earth-moving equipment.
- The majority of counties and states require a construction permit for the installation or replacement of a septic system, which may cost anywhere from $250 to $1,000 or more depending on the location and complexity of the job. For further information, contact your local building and planning department. A septic system installation typically entails substantial digging and damage to the landscaping
- New grass and other plantings can cost anywhere from $100 to $1,000 or more.
- Septic system installation or replacement necessitates obtaining a construction permit, which can cost anywhere between $250 and $1,000 depending on the location and complexity of the job. Information about this may be found by contacting your local building and planning department. Replacement grass and other landscaping might cost $100-$1,000 or more if a septic system is being installed because of excessive digging and damage to the landscaping.
- To find out if your local sanitation agency maintains a list of licensed septic installation firms, contact them and ask. Onsite wastewater recycling contractors can be found by contacting the National Onsite Wastewater Recycling Association for recommendations. Inquire about training and previous experience. Check to see if the firm is legally bonded, insured, and licensed in your jurisdiction.
| Posted by:Fredbill in Ashland, VA. | Posted:October 28th, 2020 10:10AM |
| Type:PVC pipe |
When flushing my toilet during wet weather, it was gurggling and not flowing out properly. Septic company wants to replace old black pipe with PVC pipe running 80 feet from septic tank to distribution box. They think the 65 year-old black pipe is collapsing. Is $37.50 per foot a reasonable price?
| Posted by:Fiorella in Miami, FL. | Posted:July 28th, 2020 05:07PM |
| Type:Conventional septic |
Septic tank needed repair. House did not have a drain fill. Had one collapsed leg that was installed years back. Repair was done to the tank and an entire drain fill with 5 legs was installed. My house is located in a high water table. I hired a reputable plumbing company that offers a three years warranty. Is this a reasonable price to pay for repairing a septic tank and installing a complete drain fill with 5 legs?
| Posted by:Dorie Dew in Nederland, CO. | Posted:May 22nd, 2020 02:05PM |
| Type:leach field install |
I am being told that because of county planning dept regs and not enuf “soil” (4 ft) before bedrock here in the Rockies, it will cost $40,000 to install a septic system for a 2 bedroom home (the smallest unit). Please tell me there is an alternative!
| Posted by:in Stone Mountain/atlanta, GA. | Posted:September 9th, 2019 04:09PM |
| Type:New system |
1000 gallon septic tank with 195 feet of quick 4 plus high capacity infiltrator per county code. Inlet line from house to tank plumbing with level 3 soil test and permit. By Easy Clean Septic 678-532-1276 Easycleanseptic.com
| Posted by:in Stone Mountain/atlanta, GA. | Posted:September 9th, 2019 04:09PM |
| Type:New system |
1000 gallon septic tank with 195 feet of quick 4 plus high capacity infiltrator per county code. Inlet line from house to tank plumbing with level 3 soil test and permit.
| Posted by:Gregory Chappel in Trinidad, CA. | Posted:August 15th, 2019 01:08PM |
| Type:New tank and drain field |
1500 gallon tank, 4″line, 90′ rock trenches took 3 days
| Posted by:Unclebob in McArthur, CA. | Posted:January 26th, 2019 09:01AM |
| Type:Trailer park |
I fought septic tank, leach field problems for years. this is a trailer park, with 35 trailers going into a 7500 gallon tank with 1000 feet in length of leach field. The killer was cooking oil and grease. Plugged up the leach field. Educating the tenants made a huge difference. Then I found the magical cheap combination that worked much better than those expensive enzymes.Equal parts, Yeast, Brown Sugar, and Baking soda.
I mix a pound of each and flush it down a toilet every couple of months. My Pumpings have gone from every 6 months to every 3 years, and it is not as bad at 3 years as it used to be at 6 months. Sams club and Costco sell it in bulk cheap.
| Posted by:a user in moreland, GA. | Posted:July 20th, 2018 12:07AM |
That seems like a lot of money for s single drain line
| Posted by:Sfr Development LLC in Boone, NC. | Posted:August 11th, 2017 12:08PM |
| Type:Conventional 2 Foot Chambers |
1000 gallon tank. In Mountains Boone NC. Have 30 inches to 48 inches of soil. 3 – 60 Feet 2 foot chamber lines
| Posted by:rrrr in berlin, NJ. | Posted:July 12th, 2017 02:07PM |
| Type:septic |
location-south jersey-sandy soil approx cost please? looking for economy and conformity.
| Posted by:Any Help Appreciated in Charleston, SC. | Posted:May 12th, 2017 08:05AM |
Getting ready to purchase a piece of land that requires a septic system in order to build. From soup to nuts, (permits, materials, installation) what should I be looking at for total cost? This house will be built very close to water(Charleston, SC less than.5 miles) How long does the process typically take? Any and all help truly appreciated
| Posted by:Ken Carbaugh in Leesburg, VA. | Posted:June 20th, 2016 06:06PM |
| Type:conventional to alternative systems |
A perc or perk test in Northern Va from a licensed consultant will cost between 1200-2500 dollars depending the district and county fees. Fairfax County costs are 2-4x as much due to local health dept bureaucracy and redtape requiring a surveyor and engineer to be used for any certification or permitting. Real costs of conventional systems (3-4 bedrooms) are from 14-25k depending on the soil percolation results and whether or not a pump is required. If the system is an alternative (BAT in MD) the design costs add 1000-2500 in costs and the installation of the specialized equipment adds costs that can total 20-35,000 easily.
Your property is the most valuable asset you will own so be careful with the land you contract to purchase and beware not all property is equal in value for development.
| Posted by:Bob42 in High rolls, NM. | Posted:March 25th, 2016 12:03PM |
| Type:Concrete tank, leachfield |
$5500 was the total cost for everything including permits and inspection certificate, tank, pipes, new leachfield etc. I live rurally in a mountainous region with sloping land so more work was required to remediate the land for the leach field to be level. Took about a week from contract signing to completion.
| Posted by:Susana in cumming, GA. | Posted:August 24th, 2015 04:08PM |
| Type:treating the leach field |
I had a septic company come to do a septic tank pump for $150 but they said I needed a more expensive leach field treatment at a cost of over $2500 even thought there is no back up or smell anywhere. They wind up doing an enxyme one leaving me with 6 gallons of liquid enzyme I am suppose to pour down the toiled once a month. My son says I was ripped off. Is he right?
| Posted by:payed too much? in Effort, PA. | Posted:August 2nd, 2015 11:08PM |
| Type:dual tank w mound |
Had Pump replaced as well as wire to house, dug up yard, to replace line, replaced pump, didn’t take garbage, didn’t clean up landscape, pump both tanks included in price, found truck parts in driveway and tanks not pumped, claim truck broke be back to pump.was this a lot, I had to rake out landscape and driveway, clean wires, boxes and garbage left behind,.I hope they pump the tanks soon.
| Posted by:Daytrp in Eldersburg, MD. | Posted:July 17th, 2015 08:07PM |
| Type:Repair – new construction |
Repair permit: $130-450 depending on county.New construction permits: $250-550.New septic $16-22k for advanced treatment, $8-10k conventional Perc test for repair: $850-$1,400 takes 2-6 hours. Done with county sanatarian onsite. A common septic repair: (installation of 2 – 60′ long x 3′ wide x 8′ deep with 4′ of stone below pipe invert) runs about $6,500.Trench dimensions are determined by number of bedrooms (occupancy) and percolation rates from perc test. price varies depending on Trench size.
Septic tank add $2,500-3,500 Pump chamber, pump and controls add $4,000-5,000.
Some states Have programs to help upgrade your septic tank. Check with your county health department.I bid these jobs and this is my basic start point. Specailty jobs, difficulty of access, heavy rock, all add to the bid price
| Posted by:ABMCCAA in Bakersfield, CA. | Posted:June 26th, 2015 05:06PM |
New 1500 Gallon Tank, Engineering, 60′ of Leach Field with Rock base drainage system. 50 ton of 3/4″ rock, new 4″ main line to house, soils testing and permits. Took 3 days total.
| Posted by:andrewbasil in hemet, CA. | Posted:March 23rd, 2015 06:03AM |
| Type:simple leach line replacement |
75 feet of leach line were dug up and replaced the. attached up to original fifteen hundred gallon 1973 concrete septic tank and re buried. they had to knock down two fruit trees and by accident sheared off a water tap. (Having not repaired the water line it has now become a 5 foot stream shooting straight up in air.) I do feel grandmother was taken advantage and charged double of not more for services that. and this is the worst part. a permit nor independent inspection was never done for this job.
Help me out here what do I do?
| Posted by:ltodd kinsey in cda, ID. | Posted:February 26th, 2015 11:02PM |
| Type:all |
If properly maintained a working system should never need pumped
| Posted by:M. IRIARTE in STROUDSBUR, PA. | Posted:February 4th, 2015 05:02AM |
| Type:SEPTIC |
ANYONE IN THE POCONOS HAS HAD THEIR SEPTIC SYSTEM REPLACE. WHAT WAS THE COST OF REPLACEMENT.WOULD LIKE TO GET FEEDBACK Page 2 of 2-Previous12 External Resources:
- Twri.tamu.edu/reports/1999/l5234.pdf
- sohioline.osu.edu/aex-fact/0744.html
- s
More Articles on the Subject of the Home and Garden
| Check Out All Costs for Home and Garden | How Much Does a Kitchen Remodeling Cost? | How Much Does a Propane Tank Cost? | How Much Does a Plumber Cost? |
| CostHelper is based in Silicon Valley and provides consumers with unbiased price information about thousands of goods and services. Our writers are experienced journalists who adhere to our stricteditorial ethics policy. |
