- A septic system for a two-bedroom house requires a minimum of a 750-gallon tank. Its cost typically ranges between $1,500 and $3,000. However, it is important to check local regulations because many municipalities require a minimum of a 1,000-gallon tank for a residential system.
How big of a septic tank do I need for a 2 bedroom house?
The recommendation for home use is a 1000 gallon septic tank as a starting point. The 1000 gallon size tank is a minimum and *can be suitable for a 2 bedroom, 3 bedroom house. Some recommendations say to add an extra 250 gallons of septic tank capacity for each bedroom over 3 bedrooms.
Is my septic big enough for another bathroom?
This is so because the addition of another bedroom usually includes another bathroom in many occasions which can cause a septic tank overflow if not properly accommodated for. A 900-gallon septic tank is sufficient enough for a two to three-bedroom home that does not exceed 2,250 square feet.
How often does a 1000 gallon septic tank need to be pumped?
For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.
How long do septic tanks last?
A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.
How do I upgrade my septic system?
The simplest way to add to your septic tank while remaining connected to existing sewer lines is to simply add an additional septic tank. This gives your home a larger wastewater capacity, and gives your septic system more time to treat the wastewater before draining.
How do I calculate the size of my septic drain field?
Drainfield Size
- The size of the drainfield is based on the number of bedrooms and soil characteristics, and is given as square feet.
- For example, the minimum required for a three bedroom house with a mid range percolation rate of 25 minutes per inch is 750 square feet.
What are the signs that your septic tank is full?
Here are some of the most common warning signs that you have a full septic tank:
- Your Drains Are Taking Forever.
- Standing Water Over Your Septic Tank.
- Bad Smells Coming From Your Yard.
- You Hear Gurgling Water.
- You Have A Sewage Backup.
- How often should you empty your septic tank?
How do you tell if your septic tank is full?
How to tell your septic tank is full and needs emptying
- Pooling water.
- Slow drains.
- Odours.
- An overly healthy lawn.
- Sewer backup.
- Gurgling Pipes.
- Trouble Flushing.
What is the most common cause of septic system failure?
Most septic systems fail because of inappropriate design or poor maintenance. Some soil-based systems (those with a drain field) are installed at sites with inadequate or inappropriate soils, excessive slopes, or high ground water tables.
How often should I clean my septic tank?
Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.
What will ruin a septic system?
Any paper products like tissues, paper towels, tampons, or sanitary products, even some heavier toilet paper, will clog your system if you flush enough of it. Wet wipes are another product that you should never flush into a septic system.
Learn how much it costs to Install a Septic Tank.
Septic tanks range in price from $3,157 to $10,367, or an average of $6,743. Installation of a conventional 1,000-gallon tank for a three-bedroom home might cost anywhere from $2,100 and $5,000. Materials range in price from $600 to $2,500, without labor. A comprehensive septic system, which includes a leach field (also known as a drain field), tank, and plumbing, can cost between $10,000 and $25,000 to install. A leach field installation might cost anywhere from $5,000 to $20,000, depending on the kind.
In the end, the cost of installing a septic tank is determined by the kind of system, the materials used, and the size of the tank.
This course will teach you about the several sorts of settings, such as conventional, drip irrigation, mound irrigation, evapotranspiration, recirculating sand, constructed wetland, and chambered irrigation.
Septic System Cost Estimator
Let’s run some numbers to see what the costs are. What part of the world are you in? What part of the world are you in?
| National Average | $6,743 |
| Typical Range | $3,157 – $10,367 |
| Low End – High End | $450 – $20,000 |
The cost information in this report is based on real project costs provided by 943 HomeAdvisor users.
New Septic System Cost
Most tanks and systems cost between $2,000 and $10,000 to install a new typical anaerobic septic system. Aerobic systems range in price from $8,000 to $20,000. Depending on the size of your property, the composition of the soil, and the level of the water table, you may even have to pay an extra $10,000 or more for an alternative, specialized drain or leach field. Septic systems are composed of three major components:
- Septic tank: Either anaerobic (requiring no oxygen) or aerobic (requiring oxygen but more complicated but more efficient)
- Water runs to a leach field after it has been cleaned and separated in the septic tank, where it will naturally drain through sand, gravel, and soil in a cleaning process before reaching the water table
- Water table: Plumbing: A drainpipe to the tank, followed by another branching pipe to your field will be required.
Optional components include the following:
- Some types of systems use a dose or pump tank, which pumps wastewater up into mounded or elevated leach fields and recycles the water in some cases. Pump for aeration: If your aquarium is equipped with an aerobic system, you’ll want an aerator to force oxygen into the tank.
Find Local Septic Tank Installers
The installation of a traditional anaerobic system typically costs between $3,000 and $8,000 on average. Anaerobic systems are often less expensive to build than aerobic systems, which are more complicated. However, because they are less effective at cleaning the tank, you will need a bigger leach field to accommodate the increased burden. An anaerobic septic system is a very basic system that consists of a pipe that runs from the home to the tank and a branching pipe that runs from the tank to the drain field, among other components.
Aerobic Septic System Cost
Aerobic systems, which are those that require oxygen to work properly, cost on average between $10,000 and $20,000 per system. If you’re moving from anaerobic to aerobic fermentation, you’ll almost certainly need a second tank, but the conversion will only cost you $5,000 to $10,000. Aerobic systems break down waste more effectively in the tank than anaerobic systems, allowing you to use a smaller drain field in many cases – which is ideal for houses with limited space. An aerobic wastewater system is a wastewater system that depends on aerobic bacteria (bacteria that thrive in the presence of oxygen) to break down trash in the tank.
You’ll need an aerator as well as an electrical circuit that connects to the system to complete the setup. Small, mounded, or speciality fields may necessitate the addition of a dose or pump tank to assist in pushing effluent (sewage or wastewater) upward or out in batches.
Get Quotes From Local Septic Tank Pros
Beyond the tank and leach field, there will be a few more costs to consider when creating your budget for the project. You may already have some of these costs included in your total project pricing, so make sure to get line-item prices on your estimate.
- Excavation costs $1,200–$4,500
- Building permits cost $400–$2,000
- And a perc test costs $700–$1,300. Labor costs range from $1,500 to $4,000
- The cost of septic tank material ranges between $500 and $2,000.
- Plastic and polymer materials cost $500–$2,500
- Concrete costs $700–$2,000
- And fiberglass costs $1,200–$2,000.
- 500: $500–$900
- 750: $700–$1,200
- 1,000: $900–$1,500
- 1,200: $1,200–$1,600
- 1,500: $1,500–$2,500
- 2,000: $3,000–$4,000
- 3,000: $4,500–$6,000
- 5,000+: $7,500–$14,000
- 500: $500–$900
- 1,200: $1,200–$1,
Leach Field Cost
Installing a leach or drain field, which is a component of your septic system, can cost anywhere from $3,000 to $15,000 in total. The cost of a typical drain field ranges from $2,000 to $10,000. The drain field, also known as the leach field, is the component of the septic system that is responsible for returning wastewater to the soil. Most of the time, a flooded area in the yard or a strong stink of sewage on the property is the first symptom of a problem with the drainfield. It is possible that you may require further treatment for blocked or flooded fields, which would increase the cost of the drain field repair from $10,000 to $50,000.
Alternative Septic Systems Cost
When you have a tiny property, a high water table, high bedrock, poor soil, or just wish to utilize less space, an alternate septic system is a good choice.
Mound Septic System Cost
Installing a mound septic system can cost between $10,000 and $20,000 dollars. In places with high water tables, thin soil depths, or shallow bedrock, this is the most costly system to build; yet, it is frequently required. In order to create a drain field, it uses a raised mound of sand rather than digging into the soil. Its extra cost is a result of both the additional technology required to pump sewage upward into the mound and the materials and labor required to construct the mound in the first place.
Recirculating Sand Filter Septic System Cost
Sand filter septic systems range in price from $7,500 to $18,500. They can be built above or below ground depending on the situation. In order to disperse the wastewater in the ground, they employ a pump chamber to force the wastewater through a sand filter. The liner of the filter box is normally made of PVC. This is accomplished by pumping the effluent through the sand and returning it to the pump tank, where it is then disseminated throughout the ground.
Drip Septic System Cost
Drip systems range in price from $8,000 to $18,000, depending on the size and complexity. They operate in the same way as previous systems, with the exception that they employ extensive drip tubing and a dosage mechanism. They deliver lower dosages over a shorter period of time, which is particularly effective at shallow soil depths. This method is more expensive than a standard system since it requires a dosage tank, a pump, and electrical power to operate.
Evapotranspiration System
Evapotranspiration systems range in price from $10,000 to $15,000 per system. In order to allow the liquid to evaporate from the top of an open-air tank, they employ a novel drain field configuration. They’re only usable in dry, arid areas with little rain or snow, thus they’re not recommended.
Built Wetland System
Built-in wetland systems range in price from $8,000 to $15,000, with the cost increasing if an aerobic tank is included. They are designed to simulate the natural cleaning process observed in wetland ecosystems.
After traveling through a wetland tank, where it is treated by microorganisms, plants, and bacteria, it is returned to the soil. The waste also has the effect of assisting the growth of wetland plants and the population of microbes.
Chambered System
Installation of chambered systems ranges from $5,000 to $12,000 dollars. They employ plastic perforated chambers surrounding pipes, which are frequently laid in sand, to keep them cool. Gravel is no longer required as a result of this. They are quick and simple to install, but they are more subject to crushing pressures, such as those caused by automobiles.
Septic Tank Replacement Cost
The cost of replacing a septic tank ranges from $3,000 to $10,000. From 30 to 40 years, you may anticipate your system to serve you well. The system may crack or corrode as a result of the failure and the resulting contamination of groundwater with toxic waste is an issue. When this occurs, the well water may get polluted, the yard may become marshy, and the septic system may become inoperable or fail completely. Here’s a breakdown of the various components of a septic tank, along with an estimate of their usual costs: Replacement of a septic tank pump costs between $800 and $1,400.
Replacement of the filter costs between $230 and $280.
Drain Field Replacement Cost: $7,500.
Septic System Maintenance Costs
It is essential that you pump and clean your septic tank at least once a year. In addition, you should get it examined at least once every three years. The proper maintenance of your septic tank will save you money in the long term, and it will also help you avoid potentially hazardous situations. The Environmental Protection Agency (EPA) suggests the following steps to keep your septic system in good working order:
Inspect and Pump Your Septic Frequently
Typically, the cost of septic tank pumping runs from $300 to $550, or around $0.30 per gallon – most septic tanks have capacities between 600 and 2,000 gallons. Every three to five years, you should have your septic tank inspected and pumped by a professional. If you have a bigger home (with more than three bedrooms) and you tend to use a lot of water, you should try to get it pumped at least once every three years. An checkup of a septic system might cost anything from $100 to $900. Your septic inspector will do a visual inspection of the system.
- Initial inspection costs between $250 and $500
- Annual inspection costs between $100 and $150
- And camera inspection costs between $250 and $900.
Use Household Water Efficiently
A toilet that leaks or runs continuously might waste as much as 200 gallons of water per day, although the average family consumes just 70 gallons of water. Take, for example, high-efficiency toilets, which consume 1.6 gallons or less of water every flush or less. The use of new, high-efficiency washing machines and showerheads can also help to reduce water waste, which will relieve the load on your septic system.
Properly Dispose of Your Waste
Your septic system is responsible for disposing of everything that goes down your drains and toilets.
One easy rule of thumb is to never flush anything down the toilet other than human waste and toilet paper, unless it is absolutely necessary. That implies you should never flush the following items down the toilet or drop them down the sink drain:
- Cooking grease or oil, baby wipes or wet wipes, dental floss, diapers, feminine hygiene products, cigarettes, cat litter, and paper towels are all examples of items that fall into this category.
Maintain Your Drainfield
The drainfield of your septic system is a component of the system that eliminates waste from the septic’s liquid. You should take steps to keep it in good condition, such as:
- Never park or drive your vehicle on your drainfield. Don’t ever put trees near your drainage system. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage equipment
Get in Touch With Septic Tank Installers Near You
A septic tank or septic pump tank can range in price from $350 to $14,000, depending on the material used and the size of the tank. In most home situations, you won’t have to spend more than $3,000 on the tank’s actual construction. The majority of big, high-priced units are intended for use in apartment buildings or as part of a communal sewage system.
Concrete Septic Tank Cost
Concrete tanks range in price from $700 to $2,000. The total cost of installation ranges from $2,300 to $6,500. They’re one of the most often seen forms of installation. Despite the fact that they are vulnerable to cracking and separation, they are often resilient for several decades. It’s critical to have it carefully inspected on a regular basis for cracks and runoff, among other things. Inspections and frequent cleanings will assist to extend its useful life. Your professional can tell you how frequently you should get it inspected, but it’s normally every one to three years.
Plastic and Poly Septic Tank Prices
Septic tanks made of plastic range in price from $500 to $2,500 on average, not counting installation costs. Plastic is a long-lasting, lightweight, and reasonably priced building material. They do not break as easily as concrete and do not rust. Because of their small weight, plastics are more susceptible to harm during the installation process.
Fiberglass Septic Tank Prices
Fiberglass septic tanks are typically priced between $1,200 and $2,000, not including installation. Fiberglass does not split or rust readily, but it is prone to damage during the installation process, much like plastic. However, because of its lighter weight, it is more prone to structural damage, and the tanks themselves can move in the soil.
Steel
It’s unlikely that you’ll ever see a new steel tank constructed. They will rust or corrode with time, no matter how well-made they are at the time. As a result, they are not permitted by many municipal construction rules, and you will only encounter them in existing installations. Steel is not a long-lasting material in the earth, and it is the least preferred.
Labor Costs to Install a Septic System
The cost of labor accounts for 50 percent to 70 percent of your overall expenses. Labor is typically more expensive than the tank itself in a normal installation, making it the most expensive option. For example, while the size required for a 3 to 4-bedroom home may cost between $600 and $1,100, the labor to install it might cost anywhere between $1,500 and $4,000.
Compare Quotes From Local Pros
Here is a breakdown of how much septic tanks cost in different parts of the country. Massachusetts:$9,700 California:$4,500 Florida:$5,300 Texas:$8,000 $5,600 in New York City Colorado:$7,800 Idaho:$10,000
DIY vs. Hire a Septic System Pro
The installation of a septic system is a time-consuming operation. An incorrectly fitted unit can result in water contamination, structural damage to the property, and the need for costly repairs.
In addition, an unpermitted installation might make it harder to sell and insure a property when it is completed. Make a point of interviewing at least three pros before making a final decision. Contact a septic tank installation in your area now for a free quote on your job.
FAQs
The installation of a septic system is a time-consuming endeavor. An incorrectly fitted unit can result in water contamination, structural damage to the property, and the need for costly repairs down the road. An unpermitted installation might also make it harder to sell or insure a house once it has been completed. Always interview at least three pros before making a final decision. Contact a professional septic tank installation now for a free quote on your job.
- What it is made of is a mystery. Concrete tends to require more care, but commercial-grade fiberglass and plastic are known to survive for decades in most environments. It’s amazing how well you’ve kept it up. Every one to three years, have your system inspected and pumped out
- Every three to five years, have it pumped out. It will depend on whether or not it gets vehicle traffic over the leach field. Driving over the leach field compresses it, which increases the likelihood of it failing. The soil’s chemical makeup is important. The length of time it may endure varies depending on the soil type and depth.
What are the signs I need a new septic tank?
There are a few indicators that it is time to replace your septic tank. These are some examples: If you smell sewage, you may have a solid waste problem in your septic tank that has to be dealt with immediately. Standing water: If there is no clear explanation for standing water, such as a significant rainstorm, it is possible that you have an oversaturated drain field, a damaged pipe, or a faulty septic system. A clogged septic tank will cause pipes to drain more slowly than they would otherwise be.
Construction on your home or the addition of more occupants will have an impact on your septic system.
pollution of nearby water: A septic tank leak can result in wastewater contamination, which can deposit nitrate, nitrite, or coliform bacteria in water sources around your property as a result of the leak.
Old age: If your septic system has reached the end of its useful life, it is time to replace it.
Does homeowners insurance cover septic systems?
Many unforeseen and abrupt repairs to septic tanks are covered by homeowners’ insurance policies. They do not, however, often cover harm caused by a failure to perform routine maintenance. Make certain that you are pumping and cleaning it on a yearly basis.
How much do septic system repairs cost?
Repairing a septic system can cost anything from $600 to $3,000. Most tank repairs and replacement parts cost less than $1500 for each type of repair or replacement part mentioned below. Leach fields range in price from $2,000 to $20,000.
- Tank Pumps cost between $800 and $1,500. A septic tank that is placed below the drain field may necessitate the installation of a pump to transport wastewater to the drain field. Pumping costs between $300 and $600 per year. Pumping is required to remove solid waste from even a perfectly functioning system every two or three years, even if it is in good working order. Tank Lids cost between $100 and $300 to purchase and install. If you purchase the lid and attach it yourself, it will cost you between $50 and $150
- Tank Lid Risers range in price from $300 to $1,000. Deeply submerged tanks can have their lids raised to the surface by using these devices.
Still Have Questions About Septic Tanks?
A Quick Look at Septic Tank Prices
- Total cost: $3,900 on average
- $1,500 to $5,000 on a sliding scale
- Anaerobic septic tanks cost between $2,000 and $5,000
- Aerobic septic tanks cost between $10,000 and $20,000
- Gravity septic tanks cost between $1,500 and $4,000
- Mound septic tanks cost between $10,000 and $20,000
- Chamber septic tanks cost between $1,500 and $5,000
- Conventional septic tanks cost between $2,000 and $5,000.
The wastewater generated by your household is teeming with potentially harmful germs. In order to properly dispose of waste and prevent it from backing up into your sinks and toilets, you must ensure that your septic tank is in good working condition. This Might Also Be of Interest to You: What Is the Difference Between a Septic System and a Sewer System? Everything you need to know about septic tank replacement, including how much it will cost, can be found in this article.
What Is a Septic Tank?
A septic tank is an underground chamber that is used to treat residential wastewater to a modest degree.
It is intended to store wastewater for an extended period of time, allowing particles to settle to the bottom and oil and grease to float to the surface. After that, the liquid waste is filtered away.
How Much Does It Cost to Install a Septic Tank?
In most cases, a new septic tank system will cost you around $3,900 to install. It costs between $1,500 and $5,000 to install a typical 1,250-gallon tank, which is the perfect size for a three- or four-bedroom house. This price includes the tank itself, which ranges in price from $600 to $2,100 or more depending on the size and kind. Workman’s compensation is included in the price of the installation and often ranges from $1,500 to $4,000.
Types of Septic Tank Systems
Septic tank installation and replacement costs are heavily influenced by the type of system that you select to use. Tanks come in a variety of shapes and sizes. Here are a few examples:
Anaerobic Septic System
Anaerobic systems are a popular alternative for many homes since they don’t require any additional electricity or chemicals to function properly. Anaerobic systems include microorganisms that do not require oxygen to exist and hence are called anaerobic systems. Solid waste is broken down by microbes, and any leftover liquid waste is pumped out and spread beneath the surface of the soil. The garbage is naturally recycled when the water seeps into the ground and returns to the environment. The installation of these devices is between $2,000 and $5,000.
Aerobic Septic System
Aerobic systems, in contrast to anaerobic systems, make use of microorganisms that do not require oxygen to live. To activate the bacteria in the tank, oxygen is injected into it, and the bacteria then feed on the solid waste. Aerobic systems perform effectively in soils that are unsuitable for other systems and in areas where the groundwater table is elevated. It is an excellent choice for residences that are close to a body of water. Aerobic systems are more costly to install than anaerobic ones.
Gravity Septic System
Gravity septic systems employ gravity to filter and move water through the system. They must be put on a mild slope in order to allow water to flow without the use of a pump. The cost of installation ranges from $1,500 to $4,000.
Conventional Septic System
A standard septic system is comprised of a septic tank and a trench that serves as a drain field for the collection of waste. The trench is built on stone or gravel and is designed to allow water to move through it easily. In order to prevent sand or dirt from contaminating the clean soil, geofabric is laid over the top of the trench and secured in place. In order to function properly, a traditional septic system requires a huge amount of room. The installation of these devices is between $2,000 and $5,000.
Mound Septic System
If your groundwater table is close to the surface, a mound septic system is the most appropriate option for your situation. An area for the septic system is prepared, and a sand mound is built to allow wastewater from the tank to be pumped into the mound in small amounts. The sand then acts as a filter, preventing the water from reaching the soil and groundwater.
This design necessitates a large amount of floor space. They’re also expensive to install because a sand mound needs to be built before they can be utilized. The total cost ranges between $10,000 and $20,000 per person.
Chamber Septic System
Chamber septic systems have lately gained popularity as an alternative to traditional septic systems. They are comparable to conventional systems, with the exception that plastic chambers, rather than gravel, are utilized in the drain field. These are less difficult to build and have a lower carbon footprint. The cost of installing them ranges from $1,500 to $5,000.
Septic Tank Materials
Another aspect that influences cost is the type of material used to construct your septic tank. The following are some of the most often seen materials:
Concrete
Concrete septic tanks are the most prevalent form of septic tank because they are extremely long-lasting and reliable. They can survive for 20 to 30 years if they are properly maintained. Concrete, on the other hand, may break with time. When concrete is reinforced with rebar, the strength of the concrete is increased when subjected to pressure. Because of its weight, installation is more difficult and necessitates the use of specialized equipment. The cost of a typical-sized concrete tank ranges from $720 to $2,050 dollars.
Fiberglass
Fiberglass does not deteriorate when utilized underground, and because it is nonporous, it will not support the formation of algae. Because of the tank’s modest weight, it is easy to install. You won’t have to worry about cracking since, unlike concrete, it will not expand or shrink as the weather changes. The typical cost of a fiberglass tank is between $1,600 and $2,000.
Plastic
As a nonporous material, fiberglass does not deteriorate when utilized underground and does not allow algae to grow on it. The small weight of the tank makes installation much simpler. You won’t have to worry about cracking since, unlike concrete, it will not expand or shrink as the temperature changes. Typically, a fiberglass tank costs between $1,600 and $2,000 to construct.
Steel
In spite of steel’s strength and durability, septic tanks built of steel are susceptible to rust and collapse if not properly maintained. As a result, several municipal governments have tightened their restrictions in order to discourage their usage. Typically, you’ll discover them in regions where the system was already in operation. If you are able to have one installed, they range in price from $900 to $9,900.
What Size Septic Tank Do You Need?
The size of your septic tank is normally decided by the number of bedrooms in your house. This is used to calculate the amount of water that will flow through the system on a daily basis. In general, the expense of a system increases in direct proportion to its size.
Two Bedrooms
The size of your septic tank is usually decided by the number of bedrooms in your house. When estimating how much water will flow through the system on a daily basis, this method is employed. In general, the cost of a system increases in direct proportion to the size of the network.
Three Bedrooms
A minimum of a 1,000-gallon water tank is required for a three-bedroom residence, which handles around 360 gallons of water each day on a daily basis.
Four Bedrooms
A bigger tank, with a minimum volume of 1,250 gallons, is required for a four-bedroom residence.
It is capable of handling around 480 to 600 gallons of water each day. Additional Related Articles:
- How to keep the cost of septic tank pumping to a bare minimum
- 3 Symptoms of Sewer and Septic System Problems
- Do you have a clogged sewer line? Here’s What You Should Do
- Water Sewer Line Repair: Do It Yourself or Hire a Professional
- Listed here are 15 common plumbing problems that every homeowner should be aware of.
Septic Tank Repair Costs
It’s conceivable that only a certain component of your septic tank has to be replaced rather than the complete tank. Repairs and replacement parts can be purchased for a fraction of the cost of a complete system replacement. The following are some of the most often seen repairs:
Drain Field
Drain fields can get overloaded and flood, resulting in sewage backing up into toilets and sinks. The cost of replacing a drain or leach field ranges from $3,500 to $11,000.
Tank Pump
A replacement septic tank pump typically costs between $500 and $1,200.
Tank Filter
It is the most typical type of filter change that is performed by homeowners. It typically costs between $230 and $280.
Tank Lid
Concrete coverings and steel lids may break and corrode as a result of exposure to the elements. In most cases, you can repair a septic tank lid on your own for about $35 and $60. In most cases, having it changed by a professional is more expensive.
Tank Baffle
The baffle is responsible for directing wastewater through the septic tank. A replacement baffle piece will cost between $23 and $44 dollars.
Additional Factors to Consider
A septic tank can be built either below or above ground, depending on your preferences. Because of the amount of excavating and footing preparation required, installing a tank underground is a pricey endeavor. Underground septic tanks necessitate the construction of a drain field that can accommodate a soakaway. In addition, because the soakaway allows for part of the wastewater to drain into the ground, the tank will require less emptying over time. Over time, this might result in a reduction in your expenditure.
Some demand that an inspector check and approve the site, which might result in a fee being charged to the homeowner.
How Long Does a Septic Tank Last?
The lifespan of a septic tank varies based on the material used and the type of system used. The lifespan of a septic tank might be reduced if the tank becomes clogged due to roots or floods from groundwater. Septic systems have a lifespan of 15 to 20 years on average. Maintaining your septic tank on a regular basis is the most effective approach to extend its life. Keep in mind that maintaining your tank entails more than just draining out the contents; it’s also crucial to have a professional evaluate your tank on a regular basis and perform routine maintenance.
In the event that you have a plan in place, you can call our 24-hour repair hotline anytime a covered problem develops.
Small Septic System Cost
The cost of installing a modest septic system can range from $2,910 to $18,600 depending on the size of the system. Get quotations from as many as three professionals! Enter your zip code below to get matched with top-rated professionals in your area. A septic system is far superior than an outhouse, whether you’re building a garage apartment or even a cottage off the grid.
Due to the availability of more affordable systems, there is no need to purchase more than you require. Costs might vary significantly depending on the size of your tank, the nature of your soil, and the sort of system you choose.
How Much Does a Small Septic Tank System Cost by the Gallon?
A 750-gallon tank can fit one to two bedrooms, which is the smallest capacity you’re likely to find when installing a septic system. You may even go with a 1,000-gallon system, which can manage two to four bedrooms well. Keep in mind that certain towns need a minimum tank size of 1,000 gallons, so be sure to check the regulations in your region before purchasing. The following are some typical prices for septic systems, broken down by tank size:
- 750 gallons cost between $2,910 and $13,900
- 1,000 gallons cost between $4,030 and $18,600.
How Much Does It Cost to Install a Small Septic System Yourself?
As much as you may like rolling up your sleeves and getting your hands filthy, this is a job that should be left to the professionals. When it comes to plumbing projects, there are a lot of things that may go wrong, especially when it comes to dealing with human waste. Things may get a little out of hand. That’s all there is to it. Furthermore, many municipalities may demand that a septic tank system be installed by a licensed expert. There’s also the issue of satisfying building code standards as well as passing inspections, which must be addressed.
Rather than putting yourself through the hassle (and probable tragedy), hire a local septic tank installer.
Small Septic System Cost Breakdown
While you may enjoy rolling up your sleeves and getting your hands filthy, this is a task that should be left to the professionals. When it comes to plumbing projects, there is a lot that can go wrong, particularly when it comes to dealing with human waste. Everything may end up in a shambles after that. It’s all I have to say about that. Furthermore, the installation of a septic tank system will often necessitate the use of a licensed specialist. As well as completing construction code requirements and passing inspections, there is the issue of financing.
Hire a local septic tank installerinstead of dealing with the headache (and possibly tragedy).
Small Septic Tank
The tank itself will cost you anywhere from $750 and $1,500, depending on its size and configuration. As previously stated, some municipalities need a minimum of 1,000 gallons, so be sure to verify your local regulations. Here are some rough size ranges to get you started:
- 750 gallons cost between $700 and $1200
- 1,000 litres cost between $900 and $1500.
Leach Field
After the wastewater has been sorted and processed in the septic tank, it is sent to the aleach field for disposal. Here, it flows through soil, sand, and gravel, where it is naturally cleaned before reaching the groundwater table, where it is collected. Prices for leach fields can vary greatly depending on the kind and size of your septic system, as well as the soil makeup of your property. Here are some preliminary estimations based on the size of the object:
- $800–$19,000 per 750-gallon container
- $1,080–$12,000 per 1,000-gallon container
Excavation
Again, the size of your tank and the nature of the soil will have an impact on your excavation expenditures. According on the size of your little septic tank, you might expect to spend the following:
Perc Test
A perc test will normally cost between $750 and $1,300 in labor and materials.
This test will measure the ground’s ability to absorb and filter water, as well as its ability to retain moisture. You will be required to provide documentation of this evaluation for both new installations and repairs.
Building Permits
Most municipalities will charge a price for a construction permit, which can range from $400 to $2,000 in most cases. The price will vary depending on the restrictions in your location. Anne – Adobe Stock (stock.adobe.com)
How Much Does a Small Septic System Cost by Type?
Concrete septic tanks, polyethylene septic tanks, and fiberglass septic tanks are the three most common forms. Concrete is a typical material that may survive for several decades, while it is prone to cracking and separating during the process. Plastic and fiberglass are more robust, but they are also more prone to damage during the installation process than other materials. Below are some general pricing ranges to keep in mind for each of the options.
750-Gallon Septic Tank System
- Concrete costs between $2,860 and $13,900
- Plastic/poly costs between $2,660 and $13,900
- And fiberglass costs between $3,360 and $13,900.
1,000-Gallon Septic Tank System
- $2,860 to $13,900 for concrete, $2,660 to $13,900 for plastic/polyethylene, and $3,360 to $13,900 for fiberglass
How Much Does a Small Septic System Cost by Style?
Traditional septic systems are divided into two categories: anaerobic and aerobic systems. Septic systems that are anaerobic in nature are the most frequent, however aerobic septic systems are significantly more efficient (and costly).
Anaerobic Septic System
A modest anaerobic septic system will cost you between $3,000 and $8,000, depending on its size. It is dependent on anaerobic bacteria, which are microorganisms that do not require oxygen to survive. During their time in the septic tank, these bacteria work to break down waste before it can be further digested in the soil.
Aerobic Septic System
The cost of an aerobic septic system can range from $10,000 to $18,600 dollars. These systems make advantage of aerobic microorganisms, which thrive in the presence of oxygen, to break down waste more effectively. While this system necessitates a larger budget, it is more efficient at breaking down waste in the tank, resulting in lower leach field expenditures.
What Factors Influence the Cost of a Septic Tank System?
The leach field for your septic system has the greatest influence on your entire cost since costs vary greatly depending on the size of the field required and the kind of soil you have. Here’s a list of all the variables that might influence the price of your tiny septic system:
- The nature of the soil
- The size and kind of the septic tank
- The dimensions of the leach field
- Expenses for excavation and other types of work in your region Obtaining all of the appropriate building approvals
FAQs About Septic Systems
The cost of having your small septic tank pumped is between $290 and $530 dollars. Prices vary depending on the size of the tank and the amount of time it is used. Get in touch with a septic tank cleaner in your area for an accurate quotation.
How do you know when to pump your septic tank?
It is a frequent misconception concerning septic systems that the tank must be pumped as soon as it “appeals” to be full, despite the fact that wastewater will ultimately drain onto the leach field. Instead, it is preferable to count the number of solids that have collected. An aseptic maintenance expert in your area can perform this test to determine whether or not pumping is required.
How much does it cost to repair a septic tank?
The typical cost of repairing a septic tank is between $500 and $2,600, although prices will vary depending on the extent of the repairs required. For an exact cost estimate, speak with a septic tank repair specialist in your neighborhood.
How Much Does a New Septic Tank System Cost?
The average cost of a new septic tank system is between $3,060 and $9,810 dollars. While high-end systems can cost up to $20,000, entry-level systems can be purchased for as little as $465. Get quotations from as many as three professionals! Enter your zip code below to get matched with top-rated professionals in your area. Simply simply, trash is an unavoidable component of everyday existence. Septic tanks perform the dirty work for you, and they’re not particularly attractive.
Anaerobic septic systems, which are the most common type, cost between $2,000 and $10,000. Aerobic systems are more expensive, ranging from $8,000 to $20,000. Everything from the size of your property to its soil type and water table depth will determine which option is ideal for you.
How Much Does a New Septic Tank System Cost Near You?
In general, the cost of a new septic tank system is $6,420 on the national level, while particular costs vary from state to state depending on a variety of criteria. As a starting point, each state has its own set of fees and regulations for obtaining construction permits and licenses. Before starting a septic tank project, be sure you understand the requirements in your region. The cost of a septic system varies from area to region as a result of variations in soil composition across the country.
Septic tank system prices are around $3,000 in areas with sandy soil due to the lower labor and material expenses associated with well-drained soils in these locations.
As a result, expenses in New York, Washington, and Pennsylvania tend to be greater than in other states.
Septic Tank System Cost Breakdown
The entire cost of installing a septic system will ultimately be determined by three factors: the materials and labor necessary to complete the installation, as well as the cost of digging a leach field on your land.
Materials
Concrete, fiberglass, and plastic are some of the most often used materials in septic tank systems. Concrete tanks are the most commonly used because of their longevity; with regular care, they may survive for up to 30 years or more. Concrete sewage tanks are relatively costly, costing between $700 and $2,000 on average, whereas plastic septic tanks are comparatively affordable, costing between $500 and $2,500. On the other side, fiberglass tanks are more costly, ranging from $1,200 to $2,000 per tank.
Labor
It is possible that labor prices may vary by location and will be dependent on the size and materials used in the new septic tank system. However, in most cases, labor costs account for 50 percent to 70 percent of the overall cost of a septic tank system installation. Even though installation is more expensive than purchasing the tank alone, it is well worth it if you do not have the time or resources to undertake yet another home improvement project at this point in your life. Make certain that you and your contractor or plumber go over all of the specifics.
Additionally, construction permits, which normally cost between $400 and $2,000, and perc tests, which cost between $700 and $1,300 on average, are additional expenses that may or may not be included in your septic tank installation prices.
Leach Field
Leach fields, which are a type of trench, are used in conjunction with septic tank systems to collect and treat wastewater.
It is the component of your septic system that returns the wastewater to the earth, often known as a leach field or drain field. Leach fields range in price from $2,000 to $10,000. Photo courtesy of Natalia / Adobe Stock
How Much Does a New Septic Tank System Cost by Type?
Each form of septic system has its own set of advantages and disadvantages. Even though anaerobic systems need less maintenance, they are not suitable for use on smaller parcels of land. Anaerobic systems, on the other hand, may function effectively in compact places but need additional effort.
Anaerobic
Septic tanks can be classified as either anaerobic (requiring no oxygen) or aerobic (requiring oxygen). Anaerobic systems, which are more frequent, cost between $3,000 and $8,000 on average, according to the manufacturer. They are often less expensive to install than aerobic systems, but they are less efficient and need a bigger leach field than aerobic systems. In an anaerobic septic system, a pipe connects the home to the septic tank, and another pipe connects the septic tank to the leach field, where the waste is disposed.
This type of system does not require any additional electricity or chemicals, which makes it a popular choice among homeowners.
Aerobic
Aerobic septic systems make use of oxygen that is fed into the tank to activate bacteria that feed on the solid waste in the tank. These systems are more expensive than anaerobic systems, costing between $10,000 and $20,000, but they are more efficient and may be used effectively on smaller sites. In contrast to anaerobic systems, they require more electricity to function well. Connecting it to a backup power generator will guarantee that everything continues to function correctly in the event of a power loss.
How Much Does a New Septic Tank Cost by Style?
The size and location of your property will play a role in determining which type of septic tank system is best for your needs. The mound or sand filter aerobic septic tank systems are recommended for smaller properties, while those with greater room have a wider range of alternatives.
Mound
Expect to spend more money if you choose a mound septic system, which may cost between $10,000 and $20,000 to install. A sand mound is constructed on top of the septic system region to collect wastewater that has been pumped out of the tank. Water is filtered via the sand before it enters the soil and groundwater. Even though these systems are costly, they are important in locations where the water table is high.
Sand Filter
Sand filter septic systems employ a pump to force wastewater through a sand filter at a low pressure before it is released into the soil or groundwater, effectively treating and removing nutrients from the wastewater. Despite the fact that nutrients such as phosphorus and nitrogen are naturally found in trash, when they collect in surface water, they can degrade water quality and cause aquatic ecosystem harm. They range in price from $7,000 to $18,000 and may be constructed either above or below ground.
These systems are most effective in locations with high water tables or in areas where there are bodies of water nearby.
Chamber
Chamber septic systems are identical to conventional systems, except that they employ plastic chambers in the leach field instead of gravel to collect the waste. They range in price from $5,000 to $12,000 to install. Chamber septic systems are excellent solutions for sites with varying input quantities, such as vacation homes or rental properties. You should avoid placing it near your driveway or parking area if you choose this type since driving over it might cause considerable (and stinky) harm.
Drip
Drainage systems that employ drip tubing and a dosing device to release smaller, scheduled dosages of waste on a regular basis are called drip septic systems. They are particularly effective in soils with a short depth. It takes more components to install a drip system than it does to install a traditional system, such as a dosing tank or a pump, and it may cost anywhere from $8,000 to $18,000, depending on the size of the system.
Evapotranspiration
Evapotranspiration septic systems range in price from $10,000 to $15,000 and are particularly beneficial in dry regions and locations with thin soil. They have special leach fields that allow wastewater to evaporate from the top of an open-air tank, which is not common in other tanks. If you reside in an area where there is a potential of snow or rain, an evapotranspiration septic system should be avoided at all costs. The dampness might eventually cause them to collapse, and the repair process for a septic tank is not particularly attractive.
Built Wetland
As you may have guessed, constructed wetland septic systems are designed to replicate the natural water treatment process found in wetlands. Water is treated in a wetland tank by microbes, plants, and bacteria before being released back into the environment. As a result, the waste promotes the growth of plants and bacteria. The cost of these environmentally friendly systems ranges from $5,000 to $12,000.
What Factors Influence the Cost of a New Septic Tank System?
Several factors influence the cost of a septic tank installation project. In general, costs rise as the size of the organization grows. If landscaping and permits are necessary for the installation of your septic tank, you should budget an extra $600 at the very least. The choice of material you select will also impact the cost, with plastic being very cheap compared to concrete. Furthermore, if you choose a more customized design over a stock model, you will be responsible for the additional work costs.
As a result, the amount you pay will be determined by the location of your home as well as the soil type that surrounds your property.
FAQs About Septic Tank Systems
A septic system that has been poorly built can cause serious difficulties, such as water contamination and structural damage to your property. Repairs to a septic system are not inexpensive.
Because of the high level of danger involved in constructing septic tanks, this process should be left to the professionals. Call around and talk about your requirements (as well as your budget) with a number of septic tank businesses in your region to find the ideal match.
What should I consider when installing a septic tank system?
A septic tank is an essential component of every property. Damage to your property as a result of structural failure or leaks may be costly, as well as dangerous to human and environmental health. It’s possible that the unpleasantness will even compel you to check into a motel for the night. Prior to establishing your septic tank system, take the following factors into consideration:
- Soil type
- Landscaping
- Structural hazards (avoid places near cars or heavy machinery)
- The size of the property
- The size of the septic tank
- Future maintenance
- And the location of the tank
What other projects should I do at the same time?
Excavation is frequently required when installing a septic tank system (unless you opt for an above-ground tank). Once the excavators have broken ground, you may proceed with further subterranean projects that will save you time and money in the long run, such as:
- Establish underground utilities and construct a retaining wall before beginning work on the sprinkler system.
How Much Does a Septic System Cost?
| Medium: Averages $2,000-$5,000; Runs $4,000-$12,000 in Higher Cost Areas | Enhanced System: $10,000-$20,000+ |
- The cost of installing or rebuilding a traditional septic system (including the tank) is from $2,000 to $5,000 in the Midwest, but can range from $4,000 to $12,000 or more in locations with higher material and labor costs. Septic systems that are designed, engineered-like or alternative septic systems, such as mounds, soil/peat filters, aerobic systems, and/or artificial wetlands, can cost $10,000 to $20,000 or more, according to the Rhode Island Regional Water Quality Program. These alternative septic systems perform better than the conventional technique in areas with high groundwater levels or soil that is slowly or fast percolating, as well as in areas near drinking water supplies, wetlands, coastal ponds, or other water resources. Simply installing a septic tank will cost between $500 and $1,800 based on its size (varying from 300 to 1,000 gallons) and kind. It costs an additional $100-$200 to purchase piping and other necessary supplies
- New Mexico State University gives an overview of the septic tank installation process. Many locations, however, require that a septic system be planned and constructed by experienced and licensed experts
- For more information, contact your local or state sanitation agency.
Related articles:Septic Tank Cleaning,Sewer Line Replacement,Replacing Copper Pipes What should be included:
- It is necessary to employ Septic systems when sewage treatment plants are not accessible, which is typically the case in rural or suburban areas with big lots. Essentially, a septic tank is a huge, underground, waterproof container that can be constructed of concrete, fiberglass, or plastic (polyethylene). An explanation of how septic systems function and where they might be utilized can be found at the North Carolina State University Ag Extension
- Installing or replacing a septic system might take anything from a few days to a week or more. The procedure entails substantial excavating, which is frequently accomplished using powerful earth-moving equipment.
- The majority of counties and states require a construction permit for the installation or replacement of a septic system, which may cost anywhere from $250 to $1,000 or more depending on the location and complexity of the job. For further information, contact your local building and planning department. A septic system installation typically entails substantial digging and damage to the landscaping
- New grass and other plantings can cost anywhere from $100 to $1,000 or more.
- Unlike individual septic tanks, each house has its own underground septic tank, but all of the septic tanks are connected to a single drainfield, leachfield, or soil absorption system. A cluster septic system, which is often implemented by developers, distributes the expense of drainfield installation and maintenance across a large number of dwellings.
- To find out if your local sanitation agency maintains a list of licensed septic installation firms, contact them and ask. Onsite wastewater recycling contractors can be found by contacting the National Onsite Wastewater Recycling Association for recommendations. Inquire about training and previous experience. Check to see if the firm is legally bonded, insured, and licensed in your jurisdiction.
| Posted by:Fredbill in Ashland, VA. | Posted:October 28th, 2020 10:10AM |
| Type:PVC pipe |
When flushing my toilet during wet weather, it was gurggling and not flowing out properly. Septic company wants to replace old black pipe with PVC pipe running 80 feet from septic tank to distribution box. They think the 65 year-old black pipe is collapsing. Is $37.50 per foot a reasonable price?
| Posted by:Fiorella in Miami, FL. | Posted:July 28th, 2020 05:07PM |
| Type:Conventional septic |
Septic tank needed repair. House did not have a drain fill. Had one collapsed leg that was installed years back. Repair was done to the tank and an entire drain fill with 5 legs was installed. My house is located in a high water table. I hired a reputable plumbing company that offers a three years warranty. Is this a reasonable price to pay for repairing a septic tank and installing a complete drain fill with 5 legs?
| Posted by:Dorie Dew in Nederland, CO. | Posted:May 22nd, 2020 02:05PM |
| Type:leach field install |
I am being told that because of county planning dept regs and not enuf “soil” (4 ft) before bedrock here in the Rockies, it will cost $40,000 to install a septic system for a 2 bedroom home (the smallest unit). Please tell me there is an alternative!
| Posted by:in Stone Mountain/atlanta, GA. | Posted:September 9th, 2019 04:09PM |
| Type:New system |
1000 gallon septic tank with 195 feet of quick 4 plus high capacity infiltrator per county code. Inlet line from house to tank plumbing with level 3 soil test and permit. By Easy Clean Septic 678-532-1276 Easycleanseptic.com
| Posted by:in Stone Mountain/atlanta, GA. | Posted:September 9th, 2019 04:09PM |
| Type:New system |
1000 gallon septic tank with 195 feet of quick 4 plus high capacity infiltrator per county code.
Inlet line from house to tank plumbing with level 3 soil test and permit.
| Posted by:Gregory Chappel in Trinidad, CA. | Posted:August 15th, 2019 01:08PM |
| Type:New tank and drain field |
1500 gallon tank, 4″line, 90′ rock trenches took 3 days
| Posted by:Unclebob in McArthur, CA. | Posted:January 26th, 2019 09:01AM |
| Type:Trailer park |
I fought septic tank, leach field problems for years. this is a trailer park, with 35 trailers going into a 7500 gallon tank with 1000 feet in length of leach field. The killer was cooking oil and grease. Plugged up the leach field. Educating the tenants made a huge difference. Then I found the magical cheap combination that worked much better than those expensive enzymes.Equal parts, Yeast, Brown Sugar, and Baking soda. I mix a pound of each and flush it down a toilet every couple of months.
Sams club and Costco sell it in bulk cheap.
| Posted by:a user in moreland, GA. | Posted:July 20th, 2018 12:07AM |
That seems like a lot of money for s single drain line
| Posted by:Sfr Development LLC in Boone, NC. | Posted:August 11th, 2017 12:08PM |
| Type:Conventional 2 Foot Chambers |
1000 gallon tank. In Mountains Boone NC. Have 30 inches to 48 inches of soil. 3 – 60 Feet 2 foot chamber lines
| Posted by:rrrr in berlin, NJ. | Posted:July 12th, 2017 02:07PM |
| Type:septic |
location-south jersey-sandy soil approx cost please? looking for economy and conformity.
| Posted by:Any Help Appreciated in Charleston, SC. | Posted:May 12th, 2017 08:05AM |
Getting ready to purchase a piece of land that requires a septic system in order to build. From soup to nuts, (permits, materials, installation) what should I be looking at for total cost? This house will be built very close to water(Charleston, SC less than.5 miles) How long does the process typically take? Any and all help truly appreciated
| Posted by:Ken Carbaugh in Leesburg, VA. | Posted:June 20th, 2016 06:06PM |
| Type:conventional to alternative systems |
A perc or perk test in Northern Va from a licensed consultant will cost between 1200-2500 dollars depending the district and county fees. Fairfax County costs are 2-4x as much due to local health dept bureaucracy and redtape requiring a surveyor and engineer to be used for any certification or permitting. Real costs of conventional systems (3-4 bedrooms) are from 14-25k depending on the soil percolation results and whether or not a pump is required. If the system is an alternative (BAT in MD) the design costs add 1000-2500 in costs and the installation of the specialized equipment adds costs that can total 20-35,000 easily.
Your property is the most valuable asset you will own so be careful with the land you contract to purchase and beware not all property is equal in value for development.
| Posted by:Bob42 in High rolls, NM. | Posted:March 25th, 2016 12:03PM |
| Type:Concrete tank, leachfield |
$5500 was the total cost for everything including permits and inspection certificate, tank, pipes, new leachfield etc. I live rurally in a mountainous region with sloping land so more work was required to remediate the land for the leach field to be level. Took about a week from contract signing to completion.
| Posted by:Susana in cumming, GA. | Posted:August 24th, 2015 04:08PM |
| Type:treating the leach field |
I had a septic company come to do a septic tank pump for $150 but they said I needed a more expensive leach field treatment at a cost of over $2500 even thought there is no back up or smell anywhere.
They wind up doing an enxyme one leaving me with 6 gallons of liquid enzyme I am suppose to pour down the toiled once a month. My son says I was ripped off. Is he right?
| Posted by:payed too much? in Effort, PA. | Posted:August 2nd, 2015 11:08PM |
| Type:dual tank w mound |
Had Pump replaced as well as wire to house, dug up yard, to replace line, replaced pump, didn’t take garbage, didn’t clean up landscape, pump both tanks included in price, found truck parts in driveway and tanks not pumped, claim truck broke be back to pump.was this a lot, I had to rake out landscape and driveway, clean wires, boxes and garbage left behind,.I hope they pump the tanks soon.
| Posted by:Daytrp in Eldersburg, MD. | Posted:July 17th, 2015 08:07PM |
| Type:Repair – new construction |
Repair permit: $130-450 depending on county.New construction permits: $250-550.New septic $16-22k for advanced treatment, $8-10k conventional Perc test for repair: $850-$1,400 takes 2-6 hours. Done with county sanatarian onsite. A common septic repair: (installation of 2 – 60′ long x 3′ wide x 8′ deep with 4′ of stone below pipe invert) runs about $6,500.Trench dimensions are determined by number of bedrooms (occupancy) and percolation rates from perc test. price varies depending on Trench size.
Septic tank add $2,500-3,500 Pump chamber, pump and controls add $4,000-5,000.
Some states Have programs to help upgrade your septic tank.
Specailty jobs, difficulty of access, heavy rock, all add to the bid price
| Posted by:ABMCCAA in Bakersfield, CA. | Posted:June 26th, 2015 05:06PM |
New 1500 Gallon Tank, Engineering, 60′ of Leach Field with Rock base drainage system. 50 ton of 3/4″ rock, new 4″ main line to house, soils testing and permits. Took 3 days total.
| Posted by:andrewbasil in hemet, CA. | Posted:March 23rd, 2015 06:03AM |
| Type:simple leach line replacement |
75 feet of leach line were dug up and replaced the. attached up to original fifteen hundred gallon 1973 concrete septic tank and re buried. they had to knock down two fruit trees and by accident sheared off a water tap. (Having not repaired the water line it has now become a 5 foot stream shooting straight up in air.) I do feel grandmother was taken advantage and charged double of not more for services that. and this is the worst part. a permit nor independent inspection was never done for this job.
Help me out here what do I do?
| Posted by:ltodd kinsey in cda, ID. | Posted:February 26th, 2015 11:02PM |
| Type:all |
If properly maintained a working system should never need pumped
| Posted by:M. IRIARTE in STROUDSBUR, PA. | Posted:February 4th, 2015 05:02AM |
| Type:SEPTIC |
ANYONE IN THE POCONOS HAS HAD THEIR SEPTIC SYSTEM REPLACE. WHAT WAS THE COST OF REPLACEMENT.WOULD LIKE TO GET FEEDBACK Page 2 of 2-Previous12 External Resources:
- Twri.tamu.edu/reports/1999/l5234.pdf
- sohioline.osu.edu/aex-fact/0744.html
- s
More Articles on the Subject of the Home and Garden
| Check Out All Costs for Home and Garden | How Much Does a Kitchen Remodeling Cost? | How Much Does a Propane Tank Cost? | How Much Does a Plumber Cost? |
| CostHelper is based in Silicon Valley and provides consumers with unbiased price information about thousands of goods and services. Our writers are experienced journalists who adhere to our stricteditorial ethics policy. |
