How Much Does Septic Tank Cost To Build In Nc? (Solution)

Installation costs for a septic tank will be between $2,750 and $7,700 for the labor involved. The cost for a 1,000 gallon tank for a 3 bedroom home will range anywhere from $1,500 to just over $4,000 with the actual septic tank costing anywhere from $500 to $1,000.

atozstatewideplumbing.com

  • In North Carolina, most homeowners elect conventional systems, which hold capacities of approximately 1,000 gallons, located in underground trenches. Such a system costs between $1,000 and $2,500. Installation and Maintenance

How much does it cost to put in a well and septic system in NC?

On average, a well costs around $6500-$7500. This includes all costs pertaining to drilling and the installation of the pumping system. Conditioning equipment is required in some cases and typically ranges from $1500-$3000.

Can a homeowner install a septic system in NC?

ANSWER: A homeowner may install the system for a property that will used as his or her primary residence as long as the system is gravity fed, pipe and gravel system and is limited to two systems within a five year period. ANSWER: Single septic tank, Conventional (Gravel) Gravity System.

What size septic tank do I need in NC?

A home with three bedrooms or fewer requires at least a 900 gallon tank. Four bedrooms requires at least a 1,000 gallon tank, and five bedrooms requires at least a 1,250 gallon tank.

How deep should a well be in NC?

While many areas like Florida and Eastern North Carolina can hit water in 10-50 feet, the mountains of Western North Carolina is often 100-400 feet and can even be deeper. In rare instances, you can have a well drilled that never finds water or has a low yield; more on that in a moment.

What is the cheapest septic system?

Conventional septic system These conventional septic systems are usually the most affordable, with an average cost of around $3,000.

How big should my septic tank be?

The larger your home, the larger the septic tank you’re going to need. For instance, a house smaller than 1,500 square feet usually requires a 750 to 1,000-gallon tank. On the other hand, a bigger home of approximately 2,500 square feet will need a bigger tank, more than the 1,000-gallon range.

What is the alternative to a septic tank?

Mound systems work well as alternatives to septic tanks when the soil around your home or building is too dense or too shallow or when the water table is too high. Although they are more expensive and require more maintenance than conventional systems, mound systems are a common alternative.

Does NC require septic inspection?

Septic system installers and inspectors MUST now be certified by the North Carolina On-site Wastewater Contractors and Inspectors Certification Board (NCOWCICB) in order to install or inspect septic systems in NC. The legislation does NOT require a septic system inspection as part of a real estate transaction.

How close can a septic tank be to a house?

Septic tanks are required to be at least 5 feet from the house, although most are between 10 and 25 feet away.

How close to a septic tank can I build?

– A full foundation must be 10 feet from the septic tank and 20 feet from the leaching area. – A slab foundation such as a garage must be 10 feet from the septic tank and 10 feet from the leaching area.

What will ruin a septic system?

Any paper products like tissues, paper towels, tampons, or sanitary products, even some heavier toilet paper, will clog your system if you flush enough of it. Wet wipes are another product that you should never flush into a septic system.

Can I dig my own well in NC?

North Carolina Yes, It’s legal to drill your own well in NC. In North Carolina you have to obtain a permit from the Environmental Health department of the state statute. A permit will be granted if the proposed well is properly located, constructed and maintained by the individual.

Do I need a permit to drill a well in NC?

Do I need to get a permit to drill a well or repair my existing well? Yes. Any newly constructed or repaired well must have a permit issued by the Health Department.

Can you dig a well in NC?

Is It Legal to Dig Your Own Well in North Carolina? Prior permission must be obtained from your local public health department, or, if it’s a 100,000 gallon a day well or are to be dug in a protected geographical area, the Environmental Management Commission needs to issue the permit.

Learn how much it costs to Install a Septic Tank.

Septic tanks range in price from $3,157 to $10,367, or an average of $6,743. Installation of a conventional 1,000-gallon tank for a three-bedroom home might cost anywhere from $2,100 and $5,000. Materials range in price from $600 to $2,500, without labor. A comprehensive septic system, which includes a leach field (also known as a drain field), tank, and plumbing, can cost between $10,000 and $25,000 to install. A leach field installation might cost anywhere from $5,000 to $20,000, depending on the kind.

In the end, the cost of installing a septic tank is determined by the kind of system, the materials used, and the size of the tank.

This course will teach you about the several sorts of settings, such as conventional, drip irrigation, mound irrigation, evapotranspiration, recirculating sand, constructed wetland, and chambered irrigation.

Septic System Cost Estimator

Let’s run some numbers to see what the costs are. What part of the world are you in? What part of the world are you in?

National Average $6,743
Typical Range $3,157 – $10,367
Low End – High End $450 – $20,000

The cost information in this report is based on real project costs provided by 943 HomeAdvisor users.

New Septic System Cost

Most tanks and systems cost between $2,000 and $10,000 to install a new typical anaerobic septic system. Aerobic systems range in price from $8,000 to $20,000. Depending on the size of your property, the composition of the soil, and the level of the water table, you may even have to pay an extra $10,000 or more for an alternative, specialized drain or leach field. Septic systems are composed of three major components:

  • Septic tank: Either anaerobic (requiring no oxygen) or aerobic (requiring oxygen but more complicated but more efficient)
  • Water runs to a leach field after it has been cleaned and separated in the septic tank, where it will naturally drain through sand, gravel, and soil in a cleaning process before reaching the water table
  • Water table: Plumbing: A drainpipe to the tank, followed by another branching pipe to your field will be required.

Optional components include the following:

  • Some types of systems use a dose or pump tank, which pumps wastewater up into mounded or elevated leach fields and recycles the water in some cases. Pump for aeration: If your aquarium is equipped with an aerobic system, you’ll want an aerator to force oxygen into the tank.
Find Local Septic Tank Installers

The installation of a traditional anaerobic system typically costs between $3,000 and $8,000 on average. Anaerobic systems are often less expensive to build than aerobic systems, which are more complicated. However, because they are less effective at cleaning the tank, you will need a bigger leach field to accommodate the increased burden. An anaerobic septic system is a very basic system that consists of a pipe that runs from the home to the tank and a branching pipe that runs from the tank to the drain field, among other components.

Aerobic Septic System Cost

Aerobic systems, which are those that require oxygen to work properly, cost on average between $10,000 and $20,000 per system. If you’re moving from anaerobic to aerobic fermentation, you’ll almost certainly need a second tank, but the conversion will only cost you $5,000 to $10,000. Aerobic systems break down waste more effectively in the tank than anaerobic systems, allowing you to use a smaller drain field in many cases – which is ideal for houses with limited space. An aerobic wastewater system is a wastewater system that depends on aerobic bacteria (bacteria that thrive in the presence of oxygen) to break down trash in the tank.

You’ll need an aerator as well as an electrical circuit that connects to the system to complete the setup. Small, mounded, or speciality fields may necessitate the addition of a dose or pump tank to assist in pushing effluent (sewage or wastewater) upward or out in batches.

Get Quotes From Local Septic Tank Pros

Beyond the tank and leach field, there will be a few more costs to consider when creating your budget for the project. You may already have some of these costs included in your total project pricing, so make sure to get line-item prices on your estimate.

  • Excavation costs $1,200–$4,500
  • Building permits cost $400–$2,000
  • And a perc test costs $700–$1,300. Labor costs range from $1,500 to $4,000
  • The cost of septic tank material ranges between $500 and $2,000.
  • Plastic and polymer materials cost $500–$2,500
  • Concrete costs $700–$2,000
  • And fiberglass costs $1,200–$2,000.
  • 500: $500–$900
  • 750: $700–$1,200
  • 1,000: $900–$1,500
  • 1,200: $1,200–$1,600
  • 1,500: $1,500–$2,500
  • 2,000: $3,000–$4,000
  • 3,000: $4,500–$6,000
  • 5,000+: $7,500–$14,000
  • 500: $500–$900
  • 1,200: $1,200–$1,

Leach Field Cost

Installing a leach or drain field, which is a component of your septic system, can cost anywhere from $3,000 to $15,000 in total. The cost of a typical drain field ranges from $2,000 to $10,000. The drain field, also known as the leach field, is the component of the septic system that is responsible for returning wastewater to the soil. Most of the time, a flooded area in the yard or a strong stink of sewage on the property is the first symptom of a problem with the drainfield. It is possible that you may require further treatment for blocked or flooded fields, which would increase the cost of the drain field repair from $10,000 to $50,000.

Alternative Septic Systems Cost

It costs anywhere from $3,000 to $15,000 to build a leach or drain field as part of your septic system. It costs between $2,000 and $10,000 to install a typical drainage system. Septic systems include several sections, one of which is the drain or leach field, which sends wastewater back to the ground. Most of the time, a flooded area in the yard or a strong stink of sewage on the property is the first symptom of a problem with the drainage system. It is possible that you may require cleanup for blocked or flooded fields, which would increase the cost of the project by $10,000 to $50,000.

Mound Septic System Cost

Installing a mound septic system can cost between $10,000 and $20,000 dollars. In places with high water tables, thin soil depths, or shallow bedrock, this is the most costly system to build; yet, it is frequently required. In order to create a drain field, it uses a raised mound of sand rather than digging into the soil. Its extra cost is a result of both the additional technology required to pump sewage upward into the mound and the materials and labor required to construct the mound in the first place.

Recirculating Sand Filter Septic System Cost

Sand filter septic systems range in price from $7,500 to $18,500. They can be built above or below ground depending on the situation. In order to disperse the wastewater in the ground, they employ a pump chamber to force the wastewater through a sand filter. The liner of the filter box is normally made of PVC. This is accomplished by pumping the effluent through the sand and returning it to the pump tank, where it is then disseminated throughout the ground.

Drip Septic System Cost

Drip systems range in price from $8,000 to $18,000, depending on the size and complexity. They operate in the same way as previous systems, with the exception that they employ extensive drip tubing and a dosage mechanism. They deliver lower dosages over a shorter period of time, which is particularly effective at shallow soil depths. This method is more expensive than a standard system since it requires a dosage tank, a pump, and electrical power to operate.

Evapotranspiration System

Evapotranspiration systems range in price from $10,000 to $15,000 per system.

In order to allow the liquid to evaporate from the top of an open-air tank, they employ a novel drain field configuration. They’re only usable in dry, arid areas with little rain or snow, thus they’re not recommended.

Built Wetland System

Built-in wetland systems range in price from $8,000 to $15,000, with the cost increasing if an aerobic tank is included. They are designed to simulate the natural cleaning process observed in wetland ecosystems. After traveling through a wetland tank, where it is treated by microorganisms, plants, and bacteria, it is returned to the soil. The waste also has the effect of assisting the growth of wetland plants and the population of microbes.

Chambered System

Installation of chambered systems ranges from $5,000 to $12,000 dollars. They employ plastic perforated chambers surrounding pipes, which are frequently laid in sand, to keep them cool. Gravel is no longer required as a result of this. They are quick and simple to install, but they are more subject to crushing pressures, such as those caused by automobiles.

Septic Tank Replacement Cost

The cost of replacing a septic tank ranges from $3,000 to $10,000. From 30 to 40 years, you may anticipate your system to serve you well. The system may crack or corrode as a result of the failure and the resulting contamination of groundwater with toxic waste is an issue. When this occurs, the well water may get polluted, the yard may become marshy, and the septic system may become inoperable or fail completely. Here’s a breakdown of the various components of a septic tank, along with an estimate of their usual costs: Replacement of a septic tank pump costs between $800 and $1,400.

Replacement of the filter costs between $230 and $280.

Drain Field Replacement Cost: $7,500.

Septic System Maintenance Costs

It is essential that you pump and clean your septic tank at least once a year. In addition, you should get it examined at least once every three years. The proper maintenance of your septic tank will save you money in the long term, and it will also help you avoid potentially hazardous situations. The Environmental Protection Agency (EPA) suggests the following steps to keep your septic system in good working order:

Inspect and Pump Your Septic Frequently

Typically, the cost of septic tank pumping runs from $300 to $550, or around $0.30 per gallon – most septic tanks have capacities between 600 and 2,000 gallons. Every three to five years, you should have your septic tank inspected and pumped by a professional. If you have a bigger home (with more than three bedrooms) and you tend to use a lot of water, you should try to get it pumped at least once every three years. An checkup of a septic system might cost anything from $100 to $900. Your septic inspector will do a visual inspection of the system.

  • Initial inspection costs between $250 and $500
  • Annual inspection costs between $100 and $150
  • And camera inspection costs between $250 and $900.

Use Household Water Efficiently

A toilet that leaks or runs continuously might waste as much as 200 gallons of water per day, although the average family consumes just 70 gallons of water.

Take, for example, high-efficiency toilets, which consume 1.6 gallons or less of water every flush or less. The use of new, high-efficiency washing machines and showerheads can also help to reduce water waste, which will relieve the load on your septic system.

Properly Dispose of Your Waste

Your septic system is responsible for disposing of everything that goes down your drains and toilets. One easy rule of thumb is to never flush anything down the toilet other than human waste and toilet paper, unless it is absolutely necessary. That implies you should never flush the following items down the toilet or drop them down the sink drain:

  • Cooking grease or oil, baby wipes or wet wipes, dental floss, diapers, feminine hygiene products, cigarettes, cat litter, and paper towels are all examples of items that fall into this category.
See also:  How Does A Septic Tank Filter Work? (Solution found)

Maintain Your Drainfield

The drainfield of your septic system is a component of the system that eliminates waste from the septic’s liquid. You should take steps to keep it in good condition, such as:

  • Never park or drive your vehicle on your drainfield. Don’t ever put trees near your drainage system. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage equipment
Get in Touch With Septic Tank Installers Near You

A septic tank or septic pump tank can range in price from $350 to $14,000, depending on the material used and the size of the tank. In most home situations, you won’t have to spend more than $3,000 on the tank’s actual construction. The majority of big, high-priced units are intended for use in apartment buildings or as part of a communal sewage system.

Concrete Septic Tank Cost

Concrete tanks range in price from $700 to $2,000. The total cost of installation ranges from $2,300 to $6,500. They’re one of the most often seen forms of installation. Despite the fact that they are vulnerable to cracking and separation, they are often resilient for several decades. It’s critical to have it carefully inspected on a regular basis for cracks and runoff, among other things. Inspections and frequent cleanings will assist to extend its useful life. Your professional can tell you how frequently you should get it inspected, but it’s normally every one to three years.

Plastic and Poly Septic Tank Prices

Building a concrete tank costs between $ 700 and $2,000. Prices range from $2,300 to $6,500 for a complete installation project They’re one of the most often seen sorts of systems installed in homes and businesses. However, they are prone to cracking and separation, and they are only expected to last for many decades. This should be manually checked on a regular basis for cracks and runoff, which should be done by trained professionals. Inspecting it and cleaning it on a regular basis might help it last longer.

Fiberglass Septic Tank Prices

Fiberglass septic tanks are typically priced between $1,200 and $2,000, not including installation. Fiberglass does not split or rust readily, but it is prone to damage during the installation process, much like plastic. However, because of its lighter weight, it is more prone to structural damage, and the tanks themselves can move in the soil.

Steel

It’s unlikely that you’ll ever see a new steel tank constructed. They will rust or corrode with time, no matter how well-made they are at the time. As a result, they are not permitted by many municipal construction rules, and you will only encounter them in existing installations. Steel is not a long-lasting material in the earth, and it is the least preferred.

Labor Costs to Install a Septic System

The cost of labor accounts for 50 percent to 70 percent of your overall expenses.

Labor is typically more expensive than the tank itself in a normal installation, making it the most expensive option. For example, while the size required for a 3 to 4-bedroom home may cost between $600 and $1,100, the labor to install it might cost anywhere between $1,500 and $4,000.

Compare Quotes From Local Pros

Here is a breakdown of how much septic tanks cost in different parts of the country. Massachusetts:$9,700 California:$4,500 Florida:$5,300 Texas:$8,000 $5,600 in New York City Colorado:$7,800 Idaho:$10,000

DIY vs. Hire a Septic System Pro

The installation of a septic system is a time-consuming operation. An incorrectly fitted unit can result in water contamination, structural damage to the property, and the need for costly repairs. In addition, an unpermitted installation might make it harder to sell and insure a property when it is completed. Make a point of interviewing at least three pros before making a final decision. Contact a septic tank installation in your area now for a free quote on your job.

FAQs

A septic tank has an average lifespan of 20 to 30 years, however it may live anywhere from 14 to 40 years, depending on the following factors:

  • What it is made of is a mystery. Concrete tends to require more care, but commercial-grade fiberglass and plastic are known to survive for decades in most environments. It’s amazing how well you’ve kept it up. Every one to three years, have your system inspected and pumped out
  • Every three to five years, have it pumped out. It will depend on whether or not it gets vehicle traffic over the leach field. Driving over the leach field compresses it, which increases the likelihood of it failing. The soil’s chemical makeup is important. The length of time it may endure varies depending on the soil type and depth.

What are the signs I need a new septic tank?

There are a few indicators that it is time to replace your septic tank. These are some examples: If you smell sewage, you may have a solid waste problem in your septic tank that has to be dealt with immediately. Standing water: If there is no clear explanation for standing water, such as a significant rainstorm, it is possible that you have an oversaturated drain field, a damaged pipe, or a faulty septic system. A clogged septic tank will cause pipes to drain more slowly than they would otherwise be.

Construction on your home or the addition of more occupants will have an impact on your septic system.

pollution of nearby water: A septic tank leak can result in wastewater contamination, which can deposit nitrate, nitrite, or coliform bacteria in water sources around your property as a result of the leak.

Old age: If your septic system has reached the end of its useful life, it is time to replace it.

Does homeowners insurance cover septic systems?

Many unforeseen and abrupt repairs to septic tanks are covered by homeowners’ insurance policies. They do not, however, often cover harm caused by a failure to perform routine maintenance. Make certain that you are pumping and cleaning it on a yearly basis.

How much do septic system repairs cost?

Repairing a septic system can cost anything from $600 to $3,000. Most tank repairs and replacement parts cost less than $1500 for each type of repair or replacement part mentioned below. Leach fields range in price from $2,000 to $20,000.

  • Tank Pumps cost between $800 and $1,500. A septic tank that is placed below the drain field may necessitate the installation of a pump to transport wastewater to the drain field. Pumping costs between $300 and $600 per year. Pumping is required to remove solid waste from even a perfectly functioning system every two or three years, even if it is in good working order. Tank Lids cost between $100 and $300 to purchase and install. If you purchase the lid and attach it yourself, it will cost you between $50 and $150
  • Tank Lid Risers range in price from $300 to $1,000. Deeply submerged tanks can have their lids raised to the surface by using these devices.
Still Have Questions About Septic Tanks?

With offices in Raleigh and the neighboring areas of the Triangle, Forever Clean offers septic tank installation services to residents of the area. Whenever conventional septic tank pumping or septic tank maintenance will not suffice, it is time to rely on our professional team to assist you with your new septic tank installation project.

In order to offer you with a quick and inexpensive quotation for the removal of your old septic tank as well as the installation of your new septic tank, our crew will arrive on-site and on-time for your appointment.

Septic Tank Installation Process

Our septic tank and system installation procedure at Forever Clean is meant to be as quick and as efficient as possible. A consultation is the first step in our process of installing your new septic system or tank, during which we learn about your septic needs and requirements. An on-site examination follows, during which we analyze your property and acquire a clear picture of the complexity of your septic system installation job. Once we have provided you with a price and you have decided to proceed, we will begin the process of constructing your new septic system.

Our polite staff The following are the steps that we do as part of our service:

  • In order to guarantee that your property is safe and clean, we will remove your present septic tank in a safe and efficient way utilizing cutting-edge technology. Inspection of your septic systemInstallation: Once you’ve decided on the new system that’s best for you, we’ll install it for you, making certain that it’s installed in the most efficient spot possible on your property. It is our goal to keep your yard safe and clean, therefore we backfill around the system and test all of our work with a final inspection to confirm that your new septic system is functioning correctly
  • Maintenance of Septic Tank: Finally, we will supply you with an affordableSeptic PumpingService plan that will ensure that your septic tank is thoroughly cleaned and maintained on a regular basis. Proper septic tank maintenance is essential to ensuring that your septic tank continues to operate at peak performance for many years to come.

We provide the most comprehensive range of septic system installation services in the Triangle, and our skilled experts have years of experience installing high-quality septic systems for customers just like you. Our company is really happy to be a family-owned business, which means that we are concerned about every part of your experience with us. Do you have any queries about the process? Good! The removal and replacement of a septic tank is a major undertaking. When it comes to larger tasks like these, the homeowner is likely to have more questions than he or she can answer.

When it comes to septic installation, we go above and beyond to ensure that the process is as easy and stress-free as possible.

High-quality equipment and materials, as well as knowledgeable employees The Forever Clean team is constantly striving to keep up to date on the newest technology and products in the septic business, ensuring that we are always able to provide our customers with the most up-to-date, high-quality septic systems possible.

Forever Clean is your go-to option for septic installation in Raleigh, NC, and across the Triangle region, thanks to our high-quality equipment and supplies, as well as our knowledgeable staff and commitment to providing excellent customer service.

Several factors influence septic tank installation costs, including the size and complexity of the operation as well as the kind and size of septic system being constructed.

Therefore, without knowing more about your individual project, it is impossible to provide a firm response to this issue.

Our team, on the other hand, would be delighted to offer you with a free consultation and estimate for the entire removal of your old septic tank as well as the installation of your new septic tank at your convenience.

  • Call 919-552-0200 at 116 W. Academy St., Fuquay Varina, NC 27526.

About Forever Clean

We are a full-service septic cleaning, drain cleaning, and porta potty rental company based in Fuquay-Varina, North Carolina, and we serve the greater Triangle area, including Wake, Durham, Chatham, Johnston, and Harnett counties, as well as Raleigh, Cary, Durham, Chapel Hill, Pittsboro, Apex,Garner, Holly Springs, Fuquay-Varina, Lillington, Clayton, Zebulon, and Wake Forest. We are

How Much Does a Septic System Cost?

Photograph courtesy of Gordon K. Hurdbrittak/iStock You should be aware of the following if you’re considering purchasing or developing a house in a rural region or any other location that isn’t linked to a municipal sewer system. You’ll need to install your own septic system. It will provide a destination for the water that is draining down the drain of your bathtub, toilet, and sinks. According to the American Ground Water Trust, approximately one-third of all Americans have their own septic system at their residence.

  1. But, how much does a septic system cost, and how long does it last?
  2. The cost of a septic system is determined by the size of the system.
  3. With the number of bedrooms in your home as a guideline, you may approximate each of these figures rather accurately.
  4. An approximately 1,500 gallon tank will be required for a five-bedroom home, with prices ranging between $15,000 and $25,000 depending on the model.
  5. A local septic installation specialist will be able to give you an estimate of the expenses, which may vary greatly depending on where you live.
  6. Cook, owner of Cortlandt Septic Tank in Montrose, New York, as part of the cost of the system.
  7. Please keep in mind that a septic tank will displace a significant amount of dirt onto your lawn, which you may then use elsewhere (hello, landscaping!).
  8. Even after your septic system has been securely installed in the ground, you will still have to deal with it sometimes.
  9. This prevents the muck at the bottom of the pond from increasing to a level where it spills onto your backyard (yuck).
  10. Pumping the tank will cost you between $300 and $400, according to Cook’s estimate.
  11. Trust us when we say that this is not the type of thing you want to let slip, unless you want a sewage plant in your backyard as a result.

Along with investigating the expenses of establishing and maintaining a residential sewer system, make sure you check and understand all of your local rules and regulations pertaining to wastewater treatment and related concerns. For further information, go to EPA.gov.septic/index.html.

Your access to this site has been limited by the site owner

Your ability to use this service has been restricted. (Response code 503 from the HTTP server) If you believe you have been blocked in error, you should contact the site’s administrator for assistance. You must enter your email address in the space below and click “Send” if you are a WordPress user with administrative access on this site. After that, you will receive an email with instructions on how to recover access.

Block Technical Data

Block Reason: Access from your area has been temporarily limited for security reasons.
Time: Fri, 11 Feb 2022 18:53:10 GMT

About Wordfence

Wordfence is a security plugin for WordPress that has been installed on more than 4 million websites. Wordfence is being used by the site’s owner to control who has access to their site. You may also read the documentation to understand more about Wordfence’s blocking features, or you can visit wordfence.com to find out more about Wordfence in general. For further information, please see the following link: Documentation Wordfence generated this page at 18:53:10 GMT on Friday, February 11, 2022.

How Much Does a Septic Tank Cost?

We should first grasp what a septic tank is used for and why you would need one before we can talk about how much a septic tank costs. It is necessary to determine if a septic system is required or whether it is possible to connect to a city sewer system while building a new home. A city sewage system transports wastewater from your house to a waste treatment plant for processing. A septic tank is a huge tank that is connected to a drainage field. Most of the time, it is buried underground close to your home.

If you live in the city, you are most likely connected to the municipal sewer system.

Homes in the suburbs may have either of these features, depending on the infrastructure available.

Upon reaching the top of the tank, the liquid is directed into the drain field, which is a network of big pipes with holes in them that enable the liquid to leach out into the earth.

The Price of a New Septic Tank

A new septic tank can cost upwards of $10,000, and the cost will vary depending on the system you pick, the location, and the soil condition. However, the cost is more often than not closer to $25,000 or even higher. If you want to figure out how much a new septic tank system will cost, the most straightforward method is to acquire a few quotations from different vendors and have them break down the process from installation to completion for you. It is common for the cost of a septic tank to be entirely reliant on the system itself as well as the amount of work and materials necessary to create the system.

A new sewage pump can cost you somewhere between $600-$1,500, and a septic tank would cost you double that much, depending on the tank you choose. Because concrete tanks have the longest lifespan, it is most probable that you should choose one of them.

How Do Septic Tanks Work?

In addition to tank size, location, and the number of bedrooms in the house, the cost of a sewage treatment system varies widely from one area to the next.

See also:  How Often To Drain A 2000 Gallon Septic Tank? (Perfect answer)

Perc Test

Before you can build a septic tank, you must have the area where the tank will be installed assessed for perc levels. This test determines how much liquid will be absorbed by the earth. If the location passes the perc test, you will be able to have your septic system built in that area. If this is not the case, you will have to relocate the septic system. Perc testing will also be required for the new location. If the land does not pass a perc test, you may be forced to relocate the home location.

Permit

Additionally, you may be required to get a septic system installation permit in addition to the perc test. This is determined by the laws of your county and state. In certain counties, the perc test is all that is required. The cost of the permit is determined by your geographic area as well as county costs.

Blasting

If the ground underneath your selected location is rocky, the contractor may need to blast away the rock in order to dig a hole deep enough for the septic tank. Alternatives include erecting a high-boy tank or elevating the tank above ground level, if your site permits for such types of tanks to be installed. Furthermore, the cost of blasting is dependent on your geographic location and if your county and state require an additional permission to blast.

Size

The size of the septic tank is determined by the number of bedrooms in the home. For most three-bedroom, two-bath homes, a tank with a capacity of at least 1,000 gallons is required. Your contractor will inform you of any limitations that may apply in your state and county, if any. The price of the actual tank is determined by the size of the tank.

Double Tanks

In rare circumstances, when drainage is poor or where you are located on a hill, you may be permitted to put a second tank on your property. The garbage is collected in a small tank close to the home and then transported by gravity to the larger tank. A double septic tank will cost you at least $2,000 more than a single septic tank. The cost is determined by the complexity of installing both tanks, which includes factors such as topography and blasting specifications. When a pump is required to transfer waste from the smaller tank to the bigger tank, the cost will be greater since the pump must be purchased separately.

Water Table

If the water table is very high, you’ll have to raise the drain field to the appropriate height in order to maintain the necessary distance between it and the water table. Because the cost of aggregate and labor fluctuates based on where you live, the total cost will vary.

Septic Installation

Construction crews won’t begin installing your septic tank until the framing for the home has been done, at the very least. Some contractors wait until the house is nearly done before starting work.

It will be impossible for supply trucks to drive over that portion of land after a tank has been constructed there. It would be more expensive and time-consuming to construct the house if the trucks had to ignore a portion of the surrounding region.

Septic Tank Maintenance Costs

Once your septic system has been installed, you must keep it in good working order. The expenditures associated with upkeep are negligible, while the prices associated with pumping the tank vary significantly from state to state. Adding helpful bacteria to your septic tank on a regular basis throughout the year is recommended. Some septic pumping firms recommend that you pump your septic tank every five years, while others propose that you pump your septic tank every three. Depending on how much you use it, you should pump it.

If you have a household of four to five people, you should consider having the tank pumped every three years or less frequently.

When You Should Replace a Septic System

Maintaining your septic system properly can extend its life expectancy to 25 to 30 years. The expense of replacing it will be more than the cost of installing it in the first place. You must take into consideration inflation as well as the expense of removing the existing septic system.

Signs You Need to Replace Your Septic System

You may notice one or more of these indicators indicating that your septic system needs to be replaced. If you believe you need to replace it, you may always get it examined by a qualified specialist.

  • Your pipes are back up and running
  • Whether the toilet gurgles or does not flush properly, there is a problem. You become aware of a bad odor in the house. The tank has reached capacity. When it hasn’t rained recently, you’ll see puddles in your yard. The water from your well becomes tainted

In other circumstances, you may simply need to repair the portion of the septic system that is not operating properly. As a result, the cost will be reduced in that instance. The grease trap should be checked if your septic tank is relatively new and you find that your pipes are backing up. If it becomes blocked and there are no obstructions in the pipes leading from the home to the septic tank, you will experience some of the same symptoms as you would if the tank were to be replaced.

Septic Tank Options

It is also possible to investigate various types of septic tanks if your water table is high, you have struck bedrock, or your drainage system is in bad condition. However, all of these options will be more expensive than the standard concrete tank that rests below ground.

  • Mound septic systems have a drain field that is elevated on top of a mound of sand, as opposed to conventional systems. The materials used to construct the mound, as well as the pump used to transport waste uphill, all contribute to the overall cost of the tank. Pumping the waste through a sand filter and back to the tank is the method of choice for the majority of recirculating sand filter septic systems. After that, the waste is dispersed throughout the ground. Small doses of septic solution are released through drip tubing and a timer in a drip system. The dose tank and pump, as well as the electricity used to power the pump, are additional expenses. If the perc test reveals that the drainage is inadequate, this type of system is effective. An evapotranspiration system is comprised of a drain field that allows liquid waste from an open-air tank to evaporate into the atmosphere. It is common to find this type of septic system in areas that are extremely dry and do not receive a lot of rain or snow. The constructed wetland system disposes of waste through the use of a wetland tank. The tank contains bacteria, microbes, and plants, all of which work together to treat the waste before it is emptied into the ground. A chambered system encircles pipes in the sand with perforated chambers between them. The plastic used to construct the chambers is environmentally friendly. However, because they are fragile, you must exercise caution when driving over the tank, which is not recommended regardless of the type of tank you have.

Types of Septic Tanks

There are various different types of tanks to select from. Concrete, on the other hand, is the greatest option since it can endure for decades if properly maintained and does not have some of the issues that plastic and poly tanks, as well as fiberglass tanks, possess. The fact that plastic and fiberglass tanks are so lightweight means that they are susceptible to damage during installation and to movement once they have been placed. The fourth type of tank is stainless steel, albeit they are no longer authorized in many regions due to the fact that they corrode eventually.

This means that you should either replace your tank, or if you are purchasing an existing property, you should either have the seller replace the tank, or negotiate a reduction in the purchase price to account for the tank’s replacement cost.

Final Thoughts on How Much a Septic Tank Costs:

Getting an estimate on the cost of an installation of a septic tank is as simple as calling three local firms and having them come out to offer you with a quote and a written description of the services they intend to deliver step by step is the easiest method to find out. The cost of establishing a new septic system is now predictable, eliminating the need for guessing. Despite the fact that it is a necessary expense, it is a costly one.

How Much Does a New Septic Tank System Cost?

On average, a new septic tank system will cost between $3,060 and $9,810, depending on the specifications. Get quotations from as many as three professionals! Enter your zip code below to get matched with top-rated professionals in your area. Simply simply, trash is an unavoidable component of everyday existence. Septic tanks perform the dirty work for you, and they’re not particularly attractive. Anaerobic septic systems, which are the most common type, cost between $2,000 and $10,000. Aerobic systems are more expensive, ranging from $8,000 to $20,000.

How Much Does a New Septic Tank System Cost Near You?

Whether you’re building a vacation cottage or a year-round residence, you’ll need to take in the cost of a septic tank system into your budget. In general, the cost of a new septic tank system is $6,420 on the national level, while particular costs vary from state to state depending on a variety of criteria. As a starting point, each state has its own set of fees and regulations for obtaining construction permits and licenses. Before starting a septic tank project, be sure you understand the requirements in your region.

In general, sandy soil that is well-drained is the ideal choice for gardening.

Sewage tank installation prices can reach upwards of $9,000 in places where the soil is more saturated, such as clay, and where the state has severe septic tank licensing and permission regulations.

Outside of these locations, residents may anticipate septic system expenses to be in line with the national average.

Septic Tank System Cost Breakdown

The entire cost of installing a septic system will ultimately be determined by three factors: the materials and labor necessary to complete the installation, as well as the cost of digging a leach field on your land.

Materials

Concrete, fiberglass, and plastic are some of the most often used materials in septic tank systems. Concrete tanks are the most commonly used because of their longevity; with regular care, they may survive for up to 30 years or more.

Concrete septic tanks typically cost between $700 and $2,000 on average. Plastic septic tanks are generally affordable, ranging in price from $500 to $2,500 per tank. On the other side, fiberglass tanks are more costly, ranging from $1,200 to $2,000 per tank.

Labor

It is possible that labor prices may vary by location and will be dependent on the size and materials used in the new septic tank system. However, in most cases, labor costs account for 50 percent to 70 percent of the overall cost of a septic tank system installation. Even though installation is more expensive than purchasing the tank alone, it is well worth it if you do not have the time or resources to undertake yet another home improvement project at this point in your life. Make certain that you and your contractor or plumber go over all of the specifics.

Additionally, construction permits, which normally cost between $400 and $2,000, and perc tests, which cost between $700 and $1,300 on average, are additional expenses that may or may not be included in your septic tank installation prices.

Leach Field

Leach fields, which are a type of trench, are used in conjunction with septic tank systems to collect and treat wastewater. It is the component of your septic system that returns the wastewater to the earth, often known as a leach field or drain field. Leach fields range in price from $2,000 to $10,000. Photo courtesy of Natalia / Adobe Stock

How Much Does a New Septic Tank System Cost by Type?

Each form of septic system has its own set of advantages and disadvantages. Even though anaerobic systems need less maintenance, they are not suitable for use on smaller parcels of land. Anaerobic systems, on the other hand, may function effectively in compact places but need additional effort.

Anaerobic

Septic tanks can be classified as either anaerobic (requiring no oxygen) or aerobic (requiring oxygen). Anaerobic systems, which are more frequent, cost between $3,000 and $8,000 on average, according to the manufacturer. They are often less expensive to install than aerobic systems, but they are less efficient and need a bigger leach field than aerobic systems. In an anaerobic septic system, a pipe connects the home to the septic tank, and another pipe connects the septic tank to the leach field, where the waste is disposed.

This type of system does not require any additional electricity or chemicals, which makes it a popular choice among homeowners.

Aerobic

Aerobic septic systems make use of oxygen that is fed into the tank to activate bacteria that feed on the solid waste in the tank. These systems are more expensive than anaerobic systems, costing between $10,000 and $20,000, but they are more efficient and may be used effectively on smaller sites. In contrast to anaerobic systems, they require more electricity to function well. Connecting it to a backup power generator will guarantee that everything continues to function correctly in the event of a power loss.

How Much Does a New Septic Tank Cost by Style?

The size and location of your property will play a role in determining which type of septic tank system is best for your needs.

The mound or sand filter aerobic septic tank systems are recommended for smaller properties, while those with greater room have a wider range of alternatives.

Mound

Expect to spend more money if you choose a mound septic system, which may cost between $10,000 and $20,000 to install. A sand mound is constructed on top of the septic system region to collect wastewater that has been pumped out of the tank. Water is filtered via the sand before it enters the soil and groundwater. Even though these systems are costly, they are important in locations where the water table is high.

Sand Filter

Sand filter septic systems employ a pump to force wastewater through a sand filter at a low pressure before it is released into the soil or groundwater, effectively treating and removing nutrients from the wastewater. Despite the fact that nutrients such as phosphorus and nitrogen are naturally found in trash, when they collect in surface water, they can degrade water quality and cause aquatic ecosystem harm. They range in price from $7,000 to $18,000 and may be constructed either above or below ground.

See also:  Septic Tank What Is Proper Waste Level?

These systems are most effective in locations with high water tables or in areas where there are bodies of water nearby.

Chamber

Chamber septic systems are identical to conventional systems, except that they employ plastic chambers in the leach field instead of gravel to collect the waste. They range in price from $5,000 to $12,000 to install. Chamber septic systems are excellent solutions for sites with varying input quantities, such as vacation homes or rental properties. You should avoid placing it near your driveway or parking area if you choose this type since driving over it might cause considerable (and stinky) harm.

Drip

Drainage systems that employ drip tubing and a dosing device to release smaller, scheduled dosages of waste on a regular basis are called drip septic systems. They are particularly effective in soils with a short depth. It takes more components to install a drip system than it does to install a traditional system, such as a dosing tank or a pump, and it may cost anywhere from $8,000 to $18,000, depending on the size of the system.

Evapotranspiration

Evapotranspiration septic systems range in price from $10,000 to $15,000 and are particularly beneficial in dry regions and locations with thin soil. They have special leach fields that allow wastewater to evaporate from the top of an open-air tank, which is not common in other tanks. If you reside in an area where there is a potential of snow or rain, an evapotranspiration septic system should be avoided at all costs. The dampness might eventually cause them to collapse, and the repair process for a septic tank is not particularly attractive.

Built Wetland

As you may have guessed, constructed wetland septic systems are designed to replicate the natural water treatment process found in wetlands.

Water is treated in a wetland tank by microbes, plants, and bacteria before being released back into the environment. As a result, the waste promotes the growth of plants and bacteria. The cost of these environmentally friendly systems ranges from $5,000 to $12,000.

What Factors Influence the Cost of a New Septic Tank System?

Several factors influence the cost of a septic tank installation project. In general, costs rise as the size of the organization grows. If landscaping and permits are necessary for the installation of your septic tank, you should budget an extra $600 at the very least. The sort of material you choose will also have an impact on the price, with plastic being very inexpensive when compared to concrete. Furthermore, if you choose a more customized design over a stock model, you will be responsible for the additional work costs.

As a result, the amount you pay will be determined by the location of your home as well as the soil type that surrounds your property.

FAQs About Septic Tank Systems

A septic system that has been poorly built can cause serious difficulties, such as water contamination and structural damage to your property. Repairs to a septic system are not inexpensive. Because of the high level of danger involved in constructing septic tanks, this process should be left to the professionals. Call around and talk about your requirements (as well as your budget) with a number of septic tank businesses in your region to find the ideal match.

What should I consider when installing a septic tank system?

A septic tank is an essential component of every property. Damage to your property as a result of structural failure or leaks may be costly, as well as dangerous to human and environmental health. It’s possible that the unpleasantness will even compel you to check into a motel for the night. Prior to establishing your septic tank system, take the following factors into consideration:

  • Soil type
  • Landscaping
  • Structural hazards (avoid places near cars or heavy machinery)
  • The size of the property
  • The size of the septic tank
  • Future maintenance
  • And the location of the tank

What other projects should I do at the same time?

Excavation is frequently required when installing a septic tank system (unless you opt for an above-ground tank). Once the excavators have broken ground, you may proceed with further subterranean projects that will save you time and money in the long run, such as:

  • Establish underground utilities and construct a retaining wall before beginning work on the sprinkler system.

How Much Does a Septic System Cost?

Medium: Averages $2,000-$5,000; Runs $4,000-$12,000 in Higher Cost Areas Enhanced System: $10,000-$20,000+
For homes that aren’t connected to a municipal sewer plant, a septic is an on-site system that collects, treats and disposes of household wastewater by slowly filtering it through underground soil. Typically there are two main parts, a septic tank and a soil absorption system (also called a drainfield, leachfield or disposal field). These are located underground and connected to the house by sewage pipes.Typical costs:
  • The cost of installing or rebuilding a traditional septic system (including the tank) is from $2,000 to $5,000 in the Midwest, but can range from $4,000 to $12,000 or more in locations with higher material and labor costs. Septic systems that are designed, engineered-like or alternative septic systems, such as mounds, soil/peat filters, aerobic systems, and/or artificial wetlands, can cost $10,000 to $20,000 or more, according to the Rhode Island Regional Water Quality Program. These alternative septic systems perform better than the conventional technique in areas with high groundwater levels or soil that is slowly or fast percolating, as well as in areas near drinking water supplies, wetlands, coastal ponds, or other water resources. Simply installing a septic tank will cost between $500 and $1,800 based on its size (varying from 300 to 1,000 gallons) and kind. It costs an additional $100-$200 to purchase piping and other necessary supplies
  • New Mexico State University gives an overview of the septic tank installation process. Many locations, however, require that a septic system be planned and constructed by experienced and licensed experts
  • For more information, contact your local or state sanitation agency.

Related articles:Septic Tank Cleaning,Sewer Line Replacement,Replacing Copper Pipes What should be included:

  • It is necessary to employ Septic systems when sewage treatment plants are not accessible, which is typically the case in rural or suburban areas with big lots. Essentially, a septic tank is a huge, underground, waterproof container that can be constructed of concrete, fiberglass, or plastic (polyethylene). An explanation of how septic systems function and where they might be utilized can be found at the North Carolina State University Ag Extension
  • Installing or replacing a septic system might take anything from a few days to a week or more. The procedure entails substantial excavating, which is frequently accomplished using powerful earth-moving equipment.
  • The majority of counties and states require a construction permit for the installation or replacement of a septic system, which may cost anywhere from $250 to $1,000 or more depending on the location and complexity of the job. For further information, contact your local building and planning department. A septic system installation typically entails substantial digging and damage to the landscaping
  • New grass and other plantings can cost anywhere from $100 to $1,000 or more.
  • Unlike individual septic tanks, each house has its own underground septic tank, but all of the septic tanks are connected to a single drainfield, leachfield, or soil absorption system. A cluster septic system, which is often implemented by developers, distributes the expense of drainfield installation and maintenance across a large number of dwellings.
  • To find out if your local sanitation agency maintains a list of licensed septic installation firms, contact them and ask. Onsite wastewater recycling contractors can be found by contacting the National Onsite Wastewater Recycling Association for recommendations. Inquire about training and previous experience. Check to see if the firm is legally bonded, insured, and licensed in your jurisdiction.
CostHelper News What People Are Paying – Recent Comments Page 2 of 2-Previous12
Posted by:Fredbill in Ashland, VA. Posted:October 28th, 2020 10:10AM
Type:PVC pipe

When flushing my toilet during wet weather, it was gurggling and not flowing out properly.

Septic company wants to replace old black pipe with PVC pipe running 80 feet from septic tank to distribution box. They think the 65 year-old black pipe is collapsing. Is $37.50 per foot a reasonable price?

Posted by:Fiorella in Miami, FL. Posted:July 28th, 2020 05:07PM
Type:Conventional septic

Septic tank needed repair. House did not have a drain fill. Had one collapsed leg that was installed years back. Repair was done to the tank and an entire drain fill with 5 legs was installed. My house is located in a high water table. I hired a reputable plumbing company that offers a three years warranty. Is this a reasonable price to pay for repairing a septic tank and installing a complete drain fill with 5 legs?

Posted by:Dorie Dew in Nederland, CO. Posted:May 22nd, 2020 02:05PM
Type:leach field install

I am being told that because of county planning dept regs and not enuf “soil” (4 ft) before bedrock here in the Rockies, it will cost $40,000 to install a septic system for a 2 bedroom home (the smallest unit). Please tell me there is an alternative!

Posted by:in Stone Mountain/atlanta, GA. Posted:September 9th, 2019 04:09PM
Type:New system

1000 gallon septic tank with 195 feet of quick 4 plus high capacity infiltrator per county code. Inlet line from house to tank plumbing with level 3 soil test and permit. By Easy Clean Septic 678-532-1276 Easycleanseptic.com

Posted by:in Stone Mountain/atlanta, GA. Posted:September 9th, 2019 04:09PM
Type:New system

1000 gallon septic tank with 195 feet of quick 4 plus high capacity infiltrator per county code. Inlet line from house to tank plumbing with level 3 soil test and permit.

Posted by:Gregory Chappel in Trinidad, CA. Posted:August 15th, 2019 01:08PM
Type:New tank and drain field

1500 gallon tank, 4″line, 90′ rock trenches took 3 days

Posted by:Unclebob in McArthur, CA. Posted:January 26th, 2019 09:01AM
Type:Trailer park

I fought septic tank, leach field problems for years. this is a trailer park, with 35 trailers going into a 7500 gallon tank with 1000 feet in length of leach field. The killer was cooking oil and grease. Plugged up the leach field. Educating the tenants made a huge difference. Then I found the magical cheap combination that worked much better than those expensive enzymes.Equal parts, Yeast, Brown Sugar, and Baking soda. I mix a pound of each and flush it down a toilet every couple of months.

Sams club and Costco sell it in bulk cheap.

Posted by:a user in moreland, GA. Posted:July 20th, 2018 12:07AM

That seems like a lot of money for s single drain line

Posted by:Sfr Development LLC in Boone, NC. Posted:August 11th, 2017 12:08PM
Type:Conventional 2 Foot Chambers

1000 gallon tank. In Mountains Boone NC. Have 30 inches to 48 inches of soil. 3 – 60 Feet 2 foot chamber lines

Posted by:rrrr in berlin, NJ. Posted:July 12th, 2017 02:07PM
Type:septic

location-south jersey-sandy soil approx cost please? looking for economy and conformity.

Posted by:Any Help Appreciated in Charleston, SC. Posted:May 12th, 2017 08:05AM

Getting ready to purchase a piece of land that requires a septic system in order to build. From soup to nuts, (permits, materials, installation) what should I be looking at for total cost? This house will be built very close to water(Charleston, SC less than.5 miles) How long does the process typically take? Any and all help truly appreciated

Posted by:Ken Carbaugh in Leesburg, VA. Posted:June 20th, 2016 06:06PM
Type:conventional to alternative systems

A perc or perk test in Northern Va from a licensed consultant will cost between 1200-2500 dollars depending the district and county fees. Fairfax County costs are 2-4x as much due to local health dept bureaucracy and redtape requiring a surveyor and engineer to be used for any certification or permitting. Real costs of conventional systems (3-4 bedrooms) are from 14-25k depending on the soil percolation results and whether or not a pump is required. If the system is an alternative (BAT in MD) the design costs add 1000-2500 in costs and the installation of the specialized equipment adds costs that can total 20-35,000 easily.

Your property is the most valuable asset you will own so be careful with the land you contract to purchase and beware not all property is equal in value for development.

Posted by:Bob42 in High rolls, NM. Posted:March 25th, 2016 12:03PM
Type:Concrete tank, leachfield

$5500 was the total cost for everything including permits and inspection certificate, tank, pipes, new leachfield etc. I live rurally in a mountainous region with sloping land so more work was required to remediate the land for the leach field to be level. Took about a week from contract signing to completion.

Posted by:Susana in cumming, GA. Posted:August 24th, 2015 04:08PM
Type:treating the leach field

I had a septic company come to do a septic tank pump for $150 but they said I needed a more expensive leach field treatment at a cost of over $2500 even thought there is no back up or smell anywhere. They wind up doing an enxyme one leaving me with 6 gallons of liquid enzyme I am suppose to pour down the toiled once a month. My son says I was ripped off. Is he right?

Posted by:payed too much? in Effort, PA. Posted:August 2nd, 2015 11:08PM
Type:dual tank w mound

Had Pump replaced as well as wire to house, dug up yard, to replace line, replaced pump, didn’t take garbage, didn’t clean up landscape, pump both tanks included in price, found truck parts in driveway and tanks not pumped, claim truck broke be back to pump.was this a lot, I had to rake out landscape and driveway, clean wires, boxes and garbage left behind,.I hope they pump the tanks soon.

Posted by:Daytrp in Eldersburg, MD. Posted:July 17th, 2015 08:07PM
Type:Repair – new construction

Repair permit: $130-450 depending on county.New construction permits: $250-550.New septic $16-22k for advanced treatment, $8-10k conventional Perc test for repair: $850-$1,400 takes 2-6 hours. Done with county sanatarian onsite. A common septic repair: (installation of 2 – 60′ long x 3′ wide x 8′ deep with 4′ of stone below pipe invert) runs about $6,500.Trench dimensions are determined by number of bedrooms (occupancy) and percolation rates from perc test. price varies depending on Trench size.

Septic tank add $2,500-3,500 Pump chamber, pump and controls add $4,000-5,000.

Some states Have programs to help upgrade your septic tank.

Specailty jobs, difficulty of access, heavy rock, all add to the bid price

Posted by:ABMCCAA in Bakersfield, CA. Posted:June 26th, 2015 05:06PM

New 1500 Gallon Tank, Engineering, 60′ of Leach Field with Rock base drainage system. 50 ton of 3/4″ rock, new 4″ main line to house, soils testing and permits. Took 3 days total.

Posted by:andrewbasil in hemet, CA. Posted:March 23rd, 2015 06:03AM
Type:simple leach line replacement

75 feet of leach line were dug up and replaced the. attached up to original fifteen hundred gallon 1973 concrete septic tank and re buried. they had to knock down two fruit trees and by accident sheared off a water tap. (Having not repaired the water line it has now become a 5 foot stream shooting straight up in air.) I do feel grandmother was taken advantage and charged double of not more for services that.

and this is the worst part. a permit nor independent inspection was never done for this job. And even though these men work for a major plumbing company they insisted on cash only.Is this right? Help me out here what do I do? This was 3 days ago.

Posted by:ltodd kinsey in cda, ID. Posted:February 26th, 2015 11:02PM
Type:all

If properly maintained a working system should never need pumped

Posted by:M. IRIARTE in STROUDSBUR, PA. Posted:February 4th, 2015 05:02AM
Type:SEPTIC

ANYONE IN THE POCONOS HAS HAD THEIR SEPTIC SYSTEM REPLACE. WHAT WAS THE COST OF REPLACEMENT.WOULD LIKE TO GET FEEDBACK Page 2 of 2-Previous12 External Resources:

  1. Twri.tamu.edu/reports/1999/l5234.pdf
  2. sohioline.osu.edu/aex-fact/0744.html
  3. s

More Articles on the Subject of the Home and Garden

Check Out All Costs for Home and Garden How Much Does a Kitchen Remodeling Cost? How Much Does a Propane Tank Cost? How Much Does a Plumber Cost?
CostHelper is based in Silicon Valley and provides consumers with unbiased price information about thousands of goods and services. Our writers are experienced journalists who adhere to our stricteditorial ethics policy.

Leave a Comment

Your email address will not be published. Required fields are marked *