How Much Does It Cost To Suck Out An Average Septic Tank?

Average Cost To Pump A Septic Tank The national average cost to clean and pump a septic tank is between $295 and $610 with most people spending around $375. Depending on the size of your septic tank, pumping could cost as low as $250 for a 750-gallon tank, or as high as $895 for a 1,250-gallon tank.

• The tank must be emptied, dug out, removed, and properly and safely disposed of. The average cost to pump out a septic tank is $250 to $600, and the additional cost to remove and dump a septic tank is approximately $5,500.

How much does it cost to empty a holding tank?

A holding tank needs to be professionally pumped out every 6-8 weeks and does not allow any sewage to seep into the ground surrounding it. The average cost for pumping and hauling away the waste is around $100- $150 and is priced out per gallon of wastewater.

How much does it cost to pump a septic tank?

How much does it cost to pump out a septic tank? The average cost is $300, but can run up to $500, depending on your location. The tank should be pumped out every three to five years.

How do you know if septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

1. Your Drains Are Taking Forever.
2. Standing Water Over Your Septic Tank.
3. Bad Smells Coming From Your Yard.
4. You Hear Gurgling Water.
5. You Have A Sewage Backup.
6. How often should you empty your septic tank?

What’s the difference between a septic tank and a holding tank?

A septic tank is a large vessel that collects household wastewater through an inlet pipe, treats the effluent through a bio-action process, and releases the treated water into a drainfield where the water percolates underground. A holding tank also collects wastewater from the house through an inlet.

How often should a septic tank be emptied?

How Often Should I Empty My Septic Tank? To keep your sewage system running correctly, your septic tank needs to be pumped out or desludged every 1 -2 years. It is extremely important to keep your septic tank maintained.

How long can a septic tank go without being pumped?

You can wait up to 10 years to drain your tank provided that you live alone and do not use the septic system often. You may feel like you can pump your septic tank waste less frequently to save money, but it’ll be difficult for you to know if the tank is working properly.

How often should a 1000 gallon septic be pumped?

But here are some general guidelines: Family of 2, 500-gallon tank – pump every 2.5 years. Family of 3, 1000-gallon tank – pump every 4 years. Family of 5, 1000-gallon tank – pump every 2 years.

What is the most common cause of septic system failure?

Most septic systems fail because of inappropriate design or poor maintenance. Some soil-based systems (those with a drain field) are installed at sites with inadequate or inappropriate soils, excessive slopes, or high ground water tables.

How do I clean my septic tank naturally?

You can mix about a 1/4 cup of baking soda with 1/2 cup of vinegar and 2 tablespoons lemon to make your own natural cleaning agent. The baking soda will fizz up to help get the dirt and grime in your tub and drains. It’s a great cleaner and your septic system will thank you!

How do I check my septic tanks sludge level?

To measure the sludge layer:

1. Slowly lower the tube into the septic tank until it touches the bottom of the tank.
2. As the device is slowly pulled out of the water, the check valve closes capturing a liquid/solid profile of the septic tank water. The thickness of the sludge layer can be measured.

How often does a 1000 gallon holding tank need to be pumped?

The size of the tank is one determining element regarding how often it ought to be pumped. For a household of 4 with a 1,000-gallon tank, it’s advised that it be pumped every 2.6 years, but for a 1,500-gallon tank, the time can be extended to 4.2 years and up to 5 years for a 2,000-gallon tank.

How often does a 3000 gallon holding tank need to be pumped?

How often does my holding tank need to be pumped? A holding tank may need to be pumped every 30 to 90 days depending on how much waste is generated and the size of the tank.

How often does a 2500 gallon holding tank need to be pumped?

A 2,500-gallon tank used by the same size family will need a pump every 5.9 years, while a 500-gallon tank’s pumping frequency may be as short as 7 months.

2022 Septic Tank Pumping Cost

Clean and pump a septic tank costs between $295 and $610 on average nationwide, with the majority of consumers spending about $375. It is possible that draining your septic tank will cost as little as $250 for a 750-gallon tank, or as much as $895 for a 1,250-gallon tank, depending on its size.

NationalAverage Cost	$375
Minimum Cost	$250
Maximum Cost	$895
Average Range	$295to$610

Septic systems are installed in 35.7 million houses in the United States, according to the American Ground Water Trust. This implies that no matter where you reside, there should be a sufficient number of specialists accessible to pump your septic tank at a reasonable price.

This pricing guide covers:

1. How Much Does Septic Tank Pumping Cost? How Often Should It Be Done? Septic Tank Cleaning Prices Vary Depending on Size
2. Septic Tank Emptying Procedure
3. Septic System Pumping Procedure
4. Septic Tank Emptying Procedure
5. Maintenance of a septic tank system
6. What It Takes to Repair a Septic Tank
7. How A Septic Tank Works
8. Inquiries to Make of Your Pro

How Often Do You Need To Pump Your Septic Tank?

It is necessary to pump out your septic tank, according to the United States Environmental Protection Agency (USEPA), if the scum layer is within 6 inches of the outflow pipe. When considering whether or not to put off the$375job, bear in mind that a septic system replacement may cost upwards of $10,000, but good maintenance can extend its lifespan to up to fifty years. Every three years, it is advised that you pump your tank. Most wastewater tanks can hold three years’ worth of a household’s wastewater before they need to be removed and disposed of.

Signs That Your Septic Tank Is Full

• According to the United States Environmental Protection Agency, your septic tank must be pumped if the scum layer is near 6 inches of the outflow line or the tank is overflowing. When considering whether or not to put off the$375job, bear in mind that a septic system replacement may cost upwards of $10,000, but good maintenance can extend its life by up to fifty years. Every three years, you should have your tank pumped. A typical home’s wastewater tank may hold three years’ worth of trash before it needs to be emptied.

Septic Tank Cleaning Cost By Size

When determining how frequently your septic tank should be emptied, it’s critical to understand the amount of your tank’s holding capacity. Make certain to obtain the exact size from the previous homeowner in order to ensure that your plans for pumping out the septage are suitably matched to your family size and water use. While construction rules would differ slightly from state to state, the following would serve as a general baseline guideline for the whole country:

• Homes with one or two bedrooms that are less than 1,500 square feet have a 750-gallon septic tank that costs $250 to pump
• Homes with three bedrooms that are less than 2,500 square feet have a 750-gallon septic tank that costs $250 to pump Cleanout of a 1,000-gallon septic tank, which costs $375. Homes having four bedrooms that are smaller than 3,500 square feet: A septic tank with a capacity of 1,250 gallons that costs $475 to empty

Return to the top of the page

Don’t pump your septic tank if.

1. Your property has been flooded
2. The tank may have risen to the surface and damaged the pipes, or floodwater may have entered the tank when it was opened. Remember that you don’t know how old or delicate your tank is
3. It might collapse while being pumped, so get it inspected before allowing someone to pump it. In this case, it’s not necessary to check the amount of sludge unless you believe there has been a leak and it should be checked
4. An empty tank implies that the tank cannot be tested within two weeks of a septic inspection and test.

Septic Tank Emptying Breakdown

To put the figures into context, a typical adult in the United States will consume an average of one quart of food every day. In your septic system, you’ll find the majority of that quarter gallon of water. When multiplied by the number of days in a year, this equates to around 90 gallons of solid waste generated per adult. Assuming that the usual performance of most septic systems involves a 50 percent decrease in solids, this translates into 45 gallons per person per year on an annual basis.

In accordance with environmental regulations, septic tanks should not be allowed to be more than 30 percent full, which places the pumping schedule at approximately 30–31 months if all four family members are present all day, everyday.

Return to the top of the page

Liquid Waste

On the website of the United States Geological Survey, the majority of people in the United States use between 80 and 100 gallons of water per day, including flushing the toilet (3 gallons), taking showers (up to 5 gallons per minute, with newer showers using about 2 gallons), taking a bath (36 gallons), washing clothes (25 gallons), and running the dishwasher (13 gallons). Hand-washing dishes, watering the grass, brushing teeth, drinking and cooking water, and washing your hands and face are all examples of factors that contribute to global warming.

All of this water will take up a portion of the remaining 70 percent of the capacity of your septic tank before it is sent to the drain field and disposed of properly. If you have a family of that size, it is recommended that you get it pumped every three years. Return to the top of the page

Septic System Pumping Process

In the absence of any preparation, your contractors will be required to identify the septic tank and open the tank lids, which will be an additional expense that you will be responsible for. It is preferable to discover them before the truck comes if you want to save money. Tanks installed in homes constructed after 1975 will normally have two sections. Each compartment has a separate lid, which must be identified and opened in order for each compartment to be examined and pumped individually.

The technician will do the following tasks:

• Take note of the liquid level in the tank to verify there isn’t a leak
• Reduce the pressure of the tank’s vacuum hose
• Get the garbage moving by pumping it into the truck. Keep an eye out for any backflow, which might indicate a drainage problem. Backflush the tank to remove any leftover sludge and clean it thoroughly. Examine the tank for signs of damage.

Return to the top of the page

Helpful Information

Listed below is a summary of the most important pieces of information that the contractor can tell you in connection to the work that has been done on your property. Run through the specifics of this list with them so that they are prepared to take notes as they are pumping the water.

• Name of the pumping firm, its address, phone number, and the name of the contractor
• Compartments
• The number of compartments The number of gallons that have been eliminated from your system
• The state of the septic tank
• A problem with the baffles in the septic tank Provide specifics on any further work performed on baffles or lids. Provide specifics on any work performed on the septic tank and/or pump
• Specifications for measuring the level of scum and sludge
• Any further work has been completed

Not only will this information be beneficial to you as a homeowner, but it will also provide future buyers of your house the assurance that the system has been properly maintained as well. The system will also tell you when to plan the next pumping session depending on the sludge levels present at the time of the last pumping session. Return to the top of the page

Septic Tank System Maintenance

This website, maintained by the Environmental Protection Agency, contains a vast body of information regarding septic systems, including some helpful advice on how to handle your septic system in order to preserve its long life and save any unneeded costs. Simple factors such as the ones listed below will make a significant difference:

• Keep your tanks pumped and examined on a regular basis. Make an effort to reduce the amount of wastewater created in your house by using high-efficiency toilets, showerheads, and washing machines. Please keep in mind that everything that is flushed or poured down the sink will end up in your septic system. This includes grease and oil
• Wipes
• Hygiene products
• Floss
• Diapers
• Cat litter
• Coffee grinds
• Paper towels
• Home chemicals and other substances. Keep your vehicle from parking or driving on top of your drain field. Plant just grass on top of your tank and drain field
• Otherwise, don’t bother. Take precautions to ensure that any rainfall runoff from your house or property is diverted away from your drain field
• If possible, avoid using items that purport to clean your tank because they almost always cause more harm than good.

Return to the top of the page

Septic Tank Repair Costs

The replacement of your septic system’s filter is the most typical repair you’ll have to do. Installing a high-quality filter in your septic tank will cost you around $230. Additional repairs include fittings, pipes, risers, and lids, all of which may be repaired for less than $100 in the majority of cases. It may also be necessary to replace your septic pump at other periods. This repair will typically cost around $500 to complete.

Soil Fracturing

It may be necessary to clean the drain field lines, replace the filter, or fracture the soil if your septic professional is unable to pump your system. This procedure, which includes blasting a 300-pound burst of air down a hollow tube in the ground, costs around $1,500 to complete.

Septic Tank System Cost

Was it determined by the septic cleaning service that you could require a new system? The average cost of a standard septic tank for a three-bedroom house is $3,250 dollars. In the Midwest, it may be possible to construct a good conventional system for less than $5,000, however in coastal locations, it may be necessary to spend $10,000 or more. The costs of a designed system will approximate roughly $15,000 on average. Return to the top of the page

How A Septic Tank Works

A septic system works by collecting all of the wastewater from your house through underground pipes and storing it in a subterranean tank that is often built of concrete, plastic, fiberglass, or other durable material. It is important to note that after wastewater is placed in the tank, it will remain there until the particles separate from the liquids. At that time, the sediments will sink to the bottom of the tank and create a sludge, while the oils and grease will rise to the top and form scum.

The perforated pipes of the following set of pipes are used to guarantee equitable distribution over the whole drain field.

As the effluent passes through the soil and gravel, dangerous coliform bacteria are naturally filtered out and eliminated from the water by the natural filtration process.

Maintaining your septic tank properly, which involves periodic removal of sludge every 2–3 years, will prevent the solids from rising to the height of the exit pipe for the effluent fluids and traveling with them, which is not the case if there is an exit filter installed.

As a result of their departure, they will clog the perforated pipes that are intended for distribution on the drain field, or they will find their way down to the drain field and pollute the soil and gravel that are intended for filtering of the effluent liquids. Return to the top of the page

Questions To Ask Your Pro

1. What is your per-gallon rate, and is the cost of finding the tank lids included in the quoted price? If not, what is the cost of that? What is included in the price of digging up the ground to obtain access to the bin lids? If not, how much do you charge per lid if you do not have a set rate? Is the removal of the septage included in the price? If not, what is the cost of that? This might add an extra $25–$100 to your bill. Is the price of the baffle inspections inclusive of all inspections? If not, what is the cost of that? Is there an additional price if you are working with a system that hasn’t been properly maintained? What is the hourly rate for that?

Reduce the number of qualified septic tank pumpers on your list to 3-5 for the maintenance of your tank. Look for individuals who have the greatest number of checks against the following items:

• Founded and operated a firm over a long period of time
• Received an A+ rating from the Better Business Bureau
• We provide same-day service around the clock
• We are certified and insured

Free septic system estimates from reputable septic service providers are available on HomeGuide.

How to keep Septic Tank pumping costs to a minimum

There is nothing more unpleasant than dealing with the foul stench of sewage in the house, let alone dealing with dirty, stinking water on the front yard. If you’re having these problems, it’s most likely because your septic tank is full or broken, or because there is a problem with your drain field. However, there are other signs that might include slow home drains, gurgling pipes, and a very green patch of grass in the drainage field region, in addition to the typical ones such as odors and water pooling.

Why Septic Tank pumping?

Everybody despises being surrounded by the foul stench of sewage in the house and having to cope with unclean, stinking water in the front yard. Having these problems indicates that your septic tank is either full or broken, or that there is a problem with your drain field. However, there are other indications that might include sluggish home drains, gurgling pipes, and a very green patch of grass in the drainage field region, in addition to the frequent odors and pooling of water.

Typical problems leading to Septic Tank pumping

A septic tank is typically efficient between each pumping of the tank’s sewage disposal system. Problems, on the other hand, might arise for a variety of causes. Some of the most common septic tank issues are as follows:

• The septic tank is filled with scum and sludge that has accumulated on the surface. There are clogs or obstructions in the lines connecting the inside fixtures to the septic tank. The levels of scum and sludge in the septic tank are so high that they overflow into the drain field, clogging the drain field and preventing water from penetrating into the earth. Because of significant rainfall or a high water table, the earth has become saturated. Because of breaks in the drainpipe caused by roots or by anything else, an excessive amount of water is spilled into the field area. Because the drainpipe has been smashed, water levels in the septic tank have risen above normal, causing sewage to flow into the home’s drains.

There is little doubt that when you notice a bad stench in your house, it indicates that there is more to the situation than a full septic tank. When a professional does a septic system pumping, he or she is also trained in identifying drain field issues and sewage that is flowing in the other direction of where it should be entering the septic tank.

What is the Septic Tank pump out going to cost?

Septic tank pump out costs are affected by several factors, the most significant of which are as follows.

• The dimensions of the septic tank
• The amount of liquid in the tank at the time of septic pumping
• Septic pumping preparation work is done by the homeowner before the service comes. In-field pipe condition
• Condition of the drain field
• The age of the septic tank (earlier tanks may not have risers)
• The type of septic tank installed. Geographical location (contractor charges vary depending on region)
• Contractor selection
• And

In comparison to the costs of repairing or replacing a septic tank or a drain field, the cost of septic tank pumping can be rather affordable in some situations. The following are the average costs associated with septic pumping:

• Septic tank pumping costs range from $295 to $610 on average in the United States. Costs for up to 750-gallon tanks range from $175 to $300
• Costs for up to 1,000-gallon tanks range from $225 to $400
• Costs for 1,250- to 1,500-gallon tanks range from $275 to $500
• And costs for 1,250- to 1,500-gallon tanks range from $275 to $500. Large tanks larger than 1,500 gallons cost $600.

Most homeowners will spend between $250 and $500 for a septic system pumping service, depending on the size of their system. Occasionally, a homeowner might save money by prepping the space for the septic tank specialist to work in. For example, the homeowner can make certain that the tank access port is free for the technician to pass through.

What else does a Septic pumping service do?

A regular septic tank pump out might take anywhere from one to five hours to complete. Pricing structures are determined by each individual firm. Septic tank pumping services are offered by various companies, some of which charge by the hour, while others charge a flat fee, with additional fees if there is more work involved than just septic tank pumping. Sometimes the septic pumping service will entail the repair or replacement of the septic tank. This can add up to an additional $1,500 to the expense of septic tank pumping.

Having a drain field replaced or repaired so that the septic system functions correctly might easily cost several thousand dollars or more.

The Environmental Protection Agency (EPA) advises pumping a septic tank every three to five years in order to keep the septic system in excellent working order. Investing up to $500 every three to five years will increase your chances of avoiding costly septic tank and drain field issues.

Take the guessing out of Septic pumping cost

Don’t be concerned if this appears to be a complex process. If you keep your septic tank in good condition, it is uncommon to develop difficulties for many years. Because a well kept septic tank has a life expectancy of up to 30 years, it is important to keep it in good condition. Dealing with a septic tank mess is never a pleasant experience. Being prepared with a Plumbing Plan from HomeServe is a wise idea in this situation. When it comes to covered repairs, we offer a selection of economical options that will help you secure your funds up to the benefit amount.

How Much Does Septic Tank Pumping Cost?

Pumping a septic tank may cost anywhere from $290 to $530 on average. Get quotations from as many as three professionals! Enter your zip code below to get matched with top-rated professionals in your area. Septic tank pumping may not be the most glamorous of duties, but it is one that must be completed on a regular basis. Septic tanks must be emptied out every two to three years in order to function correctly. The service, which is performed just once, costs an average of $400. However, if left unattended for decades, septic cleaning can morph into septic replacement, which can cost anywhere from $5,000 to $10,000.

How Much Does It Cost to Pump a Septic Tank Per Gallon?

The size of your septic tank will have an impact on the cost of cleaning. Pumping a septic tank costs around $0.30 per gallon on average, and the majority of septic tanks are between 600 and 2,000 gallons in capacity. Additionally, the size of your septic tank will influence how long you can go between cleanings, as bigger septic tanks do not require pumping as frequently as smaller ones. The majority of tanks rely on gravity to function. Sloped pipes transport wastewater from your home to a holding tank that is buried in the ground outside your property.

How Much Does It Cost to Pump a Septic Tank Near You?

The cost of septic tank pumping varies based on where you live. Here are a few samples of how much it costs to pump a septic tank in various locations around the United States:

• $175–275 on Long Island, NY
• 255–330 in Concord, NH
• 245–435 in Jacksonville, FL
• 260–350 in Denver
• 440–750 in Portland, OR
• 250–440 in Boise, ID
• $175–275 in Minneapolis
• 360–600 in Phoenix
• 260–510 in Little Rock, AR
• 245–320 in Milwaukee
• And $175 to 275 in Minneapolis.

If you’re wondering how much septic tank pumping costs where you live, collecting quotes from septic tank businesses in your region will help you figure out what the prevailing rate is in your neighborhood.

How Much Does It Cost to Pump a Septic Tank Yourself?

It’s better to leave the job of pumping out a septic tank to the pros. Pumping sludge from your septic system is not only unpleasant, but it also necessitates the use of specialist equipment that you are unlikely to have on hand. Following the removal of waste from the septic tank, it must be transported and disposed of in the appropriate manner. For the majority of homeowners, it is safer and more cost-effective to hire a professional to complete this work. You may get in touch with a local septic tank cleaning to explore your alternatives and obtain a customized price for your situation.

What Factors Influence the Cost to Pump a Septic Tank?

The size and utilization of a septic tank are the two most important elements that determine the cost of pumping a septic tank.

Tanks that are smaller in size and tanks that are used more frequently will require more frequent pumping.

Size

Depending on the size of the tank, it might cost as little as $175 to pump a 600-gallon tank or as much as $600 to pump a 2,000-gallon tank.

Usage

A higher frequency of pumping will be required for tanks with significant utilization. For example, if you often use huge amounts of water, throw food down the garbage disposal, or hold parties with a high number of visitors, you’ll need to pump your septic tank more frequently than the average person.

FAQs About Septic Tank Pumping

Septic tanks, in contrast to an urban sewage system, which transports wastewater to a central drainage system, treat wastewater on a house-by-house basis. They are the last resting place for all of the wastewater generated by your home, including that from bathtubs, showers, sinks, toilets, and washing machines. Wastewater is channeled into a tank buried in the earth outside your home, and then the water is sent through sloping pipes to a drainage area outside your home.

Why do you need to pump your septic tank?

The sludge that accumulates at the bottom of your septic tank over time is called sludge. Sludge will ultimately leak into your leach field and then back up into your pipes if you do not pump your tank. Your septic tank may fail and require replacement if it is not pumped and maintained on a consistent basis.

How much does it cost to repair a septic system?

If you cause damage to your septic system, it may be necessary to replace it. A septic system repair can cost anywhere from $650 to $2,900. Major repairs, on the other hand, might cost thousands of dollars or more. In short, septic tank pumping is a necessary but unpleasant activity that should not be avoided. You should consult with an experienced septic tank maintenance specialist if you are experiencing problems with your system. If you have any questions, please contact us.

What causes septic tank odor?

Septic tank odor might occur as a result of a full tank, clogged drains, or obstructed venting systems, among other things. Not only is a stinky septic tank unpleasant, but it may also be a health concern to you and your family if it is not properly maintained.

How often do I need to pump my septic tank?

The frequency with which you must pump your tank is determined by the size of your tank and the number of people that reside in your house. The optimum interval is every three to five years on average, according to the experts. However, it is possible that it will be much more or less than this. Consider the following example: a single individual with a 1,000-gallon septic tank may only need to pump it once every nine to twelve years, whereas a five-member family with the same-sized tank may only need to pump it once every two to four years.

Septic Tank Pumping Cost Near Me: Septic System Cleaning Service Calculator

To pump out a septic tank, an average expense of $400 is incurred. If your property is between 1,500 and 3,000 square feet, you could expect to pay between $275 and $550 for a normal septic tank pumping service. Cleaning a really large tank might cost upwards of $1000.

In This Article

1. Pumping a Septic Tank
2. Example Tank Pumping Prices by Location
3. Cost to Pump Out a Septic Tank What to Expect When Having Your Septic Pumped
4. When Should You Have Your Tank Cleaned
5. What to Expect When Having Your Septic Pumped Examining the Inspection Procedures
6. What to Look for When Choosing a Septic Service
7. How to Protect Your Septic System Septic Pump Estimates are provided at no cost.

Even the best septic systems require cleaning every one to three years, depending on their age. Avoid regular cleaning, and you can find yourself waking up one morning to find raw sewage backing up your toilets and drains. At that point, the answer is neither straightforward nor nice, nor is it particularly economical. During the breakdown of waste in a septic system, there are three layers: a layer of solid material called sludge on the bottom, an oily layer called scum in the middle, and a layer of clear liquid known as effluent or gray water on top.

According to the United States Environmental Protection Agency, sludge and scum should be pushed out when the scum layer is within 6 inches of the outlet pipe or when the top of the sludge layer is within 12 inches of the outlet pipe.

Cost to Pump Out a Septic Tank

The cost is determined by the size of the tank and the amount of water in it. Aside from that, charges differ from one contractor to the next and from one geographic region to the next. Depending on the service, costs might range from $75 to $750 or more.

• A small tank with a volume of around 500 or 750 gallons might cost between $75 and $150 to clean
• Nonetheless, The cost of an average-sized tank with a capacity of 1,250 or 1,500 gallons is typically between $200 and $400
• However, larger tanks can cost as much as $600. Budget between $500 and $750 for a very big tank (2,500 gallons or more).

This small amount of preventative maintenance will save you a significant amount of money in the long term. In most cases, replacing a malfunctioning septic system will cost anywhere from $3,000 to $10,000 or more. A septic system, on the other hand, may endure anywhere from 20 to 40 years if it is properly maintained. The following are some examples of septic tank pumping charges based on location:

City	Zip Code	Average Price Paid
Boston, MA	02108	$332
Charlotte, NC	28105	$963
Newark, NJ	08601	$332
New York City	10001	$410
Philadelphia, PA	19019	$300
Manchester, NH	03101	$257

*According to HomeAdvisor.com users

Video: What To Expect When Having Your Septic Pumped

Annual inspections are essential for keeping track of the amount of sludge and scum in your system. Aside from that, it might be tough to tell when someone is high. A professional septic service will measure the levels in your system, inspect the pipes in your system, and ensure that your drain field is functioning correctly. If the amount of scum and sludge is significant, the service will propose that the system be cleaned. Your system may overflow if it is not cleaned on a regular basis, causing substantial damage and perhaps resulting in the concerns listed above.

1. They have the potential to pollute local water supplies, spread disease, and depreciate property values.
2. Generally speaking, if there are only one or two people living in the house, septic tank cleaning should only be performed every five years as a general rule.
3. If you have more than five individuals, you may only be able to use the tank once a year, especially if the tank is tiny.
4. Aside from an inspection, there are a few of additional signs that your septic system needs to be serviced.
5. Raw sewage odor in your yard is also a significant signal that something is wrong.

The Inspection Process

When conducting a professional inspection, the first step is to locate your septic system, which is not always easy to do. If you have earlier inspection records that reveal the location of the tank, you should send those to the septic service. In any case, make a copy of the inspection records so you can save time and money on the next one. As soon as the septic tank has been identified, the service will expose the manhole and inspection port, which may need some digging. If this is the case, you might consider having an access cover erected to make future inspections easier and more affordable.

Then, using specialized equipment that are introduced into the inspection port, he or she will quantify the amount of sludge and scum present.

It is the septic company’s responsibility to carry any waste from the tank to the local treatment facility. In some situations, the firm will charge you an additional cost to cover the disposal fee that it pays to the city or town. It is possible that the cost will be $25, $50, or $100.

How to Choose a Septic Service

Inspect the licensing or certification of any septic service you intend to engage. You may get a list of qualified septic pumpers by contacting your local health authority; most have one on hand. Once you’ve compiled a list of potential vendors, request quotations from at least three to compare pricing. In addition, you may seek referrals from friends and neighbors; nevertheless, it is still a good idea to obtain various quotations. Inquire about a service’s pricing structure in detail from any company you’re considering hiring.

• What is the approximate cost of having your septic tank pumped?
• Is there an additional price for digging?
• Insist on receiving a written itemized breakdown of all charges.
• If this occurs, be certain that you are happy with the rationale provided for the additional expenses.
• You might be held liable for any accidents that occur on your premises if you do not have workers’ compensation or liability insurance.

How to Protect Your Septic System

Inspections should be performed on a regular basis, but there are several things you can do to extend the life of your septic system and minimize the frequency of pumping:

• Keep an eye on what you flush down the toilet. Never flush food leftovers, grease, or oil down the toilet. If you have a waste disposal, you should consider utilizing it only when absolutely necessary. Increase the duration between pumping sessions by composting or tossing away food leftovers instead of putting them in the trash. Never flush anything down the toilet other than toilet paper. Tissues, tampons, sanitary napkins, and paper towels are examples of such items. Use only cleaning chemicals that have been approved for use with septic systems. Restriction should be observed while using goods such as toilet cleansers, drain cleaners, and bleach. They can cause harm to your septic system, especially if you use them on a regular basis. Products that promise to clean your septic system should be avoided. The majority of medical specialists feel that these products are ineffectual and may even be damaging to the system. Don’t put any plants or flowers on top of your leach field, and don’t let anybody drive or park a car on top of it

• 3 Warning Signs that a Sewer Backup is on the Way
• How to Maintain Your Septic System

Find Local Septic System Pros Who Will Compete for Your Business

A properly functioning septic tank necessitates regular maintenance. Septic tank difficulties will emerge if this is not done. Having a septic tank backlog and having foul odors are just two of the issues that can arise if the tank is not maintained on a regular basis. It is critical to get your sewage tank pumped on a regular basis by a septic provider. The entire neighborhood will stink if you are late with the upkeep, and you don’t want to be the neighbor that is late with everything. A four-person family with a 500-gallon septic tank will need to have their tank drained once a year at the absolute least.

Garbage disposals also add roughly 20 percent to the length of time required for this task.

Average Septic Tank Cleaning Cost

Depending on the size of the septic tank, the cost of cleaning it can range from $200 to $300. Prices for a large, 2,500 gallon tank can reach as high as $800. If the contractor needs to identify the septic tank and locate the entrance, the cost might range from $200 to $400, depending on the amount of effort needed in the search. The installation of sensors in septic tanks, which detect and notify problems such as high scum and sediment levels, possible backup difficulties, and other issues is becoming more popular.

The most effective strategy to avoid any problems with your septic system is to physically examine it on a regular basis to ensure that no accumulation is taking place.

The septic system on a residential property is one of the most critical components of the structure.

Some folks aren’t even sure where the tank is situated, let alone how to get there.

Regular maintenance is the most effective strategy to maintain your septic system in good working order (and avoid costly repairs). Proper septic system maintenance can extend the life of your system by 25 to 30 years if done regularly.

How Does the Septic System Work?

An aseptic system is made up of two parts: a drain field and a tank. Wastewater from the bathroom, kitchen, and laundry room is collected in the tank, which then separates the solids from the liquids. During the settling process, heavier particles sink below and produce the sludge layer, while lighter solids and grease float upward and form the scum layer. Through these layers, water is pushed out into the drainage field. Bacteria consume the scum and sludge layers as they accumulate over time, preventing either layer from expanding excessively quickly.

It is critical that your tank be pumped on a frequent basis in order to avoid the scum and sludge layers from becoming too thick.

Maintaining Your Septic System

The most effective approach to ensure that your septic system is operating correctly is to have it inspected by a professional at least once a year. A expert will be able to service your system and give it the attention it requires, ensuring that everything functions as efficiently as possible. But there are still things you can do to preserve the health of your septic system in good working order.

• Utilize high-efficiency appliances: The more the amount of water you use or waste, the greater the amount of water that passes through your septic system, potentially causing problems. Because high-efficiency appliances decrease water waste, they make your system less susceptible to drain field flooding. Limit the amount of information that enters the system: All of the waste you pour down the drain or flush down the toilet is processed by your septic system. Grease and oil, for example, can clog your system, regardless of whether they are drained, flushed, or run via the waste disposal system. It is recommended that you avoid flushing anything other than toilet paper, pouring chemical drain openers down the drain, and sending coffee grinds or fats via your garbage disposal as a general rule. Keep your drain field in good condition: Cleaning and maintaining your drain field is a rather straightforward process. Growing roots have a tendency to collide with and interfere with septic systems, therefore keep plants away from the drain field to avoid this problem. Likewise, it is suggested that you refrain from parking across the drain field
• Pump your tank on a regular basis: Pumping out your septic tank on a regular basis is advised every two to four years, according to industry standards. This guarantees that any solid items have been adequately decomposed and will not block the drain field in the future. Pumping your system consistently and properly extends the life of your system and helps to prevent system failure. Keep excess water away from the house: You must keep your drain field free of any surplus or blockages that may be present at any time. Rainwater and other additional drainage systems can cause extra water to accumulate near your drain field, which slows down the treatment process. Keep copies of all records and reports: Detailed reports on any current or possible concerns, as well as scum and sludge levels, should be included with every inspection of your septic system. Keep these reports safe so that any future repairs may be done quickly and efficiently.

How Much Does it Cost to Maintain Your Septic System?

Make use of high-efficiency appliances: The more water you use or waste, the more water will pass through your septic system, which may result in problems down the road. High-efficiency appliances decrease water waste, making your system less susceptible to drain field flooding. ; What may and cannot be put into the system is strictly limited: It is your septic system that processes whatever you pour or flush down the drain or toilet. Grease and oil, for example, may clog your system regardless of whether they are drained, flushed, or run through your garbage disposal.

1. Keep your drain field in good condition.
2. Growing roots have a tendency to collide with and interfere with septic systems, so keep plants away from the drain field.
3. Make sure to routinely pump your tank: A septic tank should be pumped out at least once every two to four years, according to conventional recommendations.
4. System longevity is increased and system failure is reduced when pumping is done consistently and correctly.
5. Adding additional drainage systems to handle things like precipitation typically results in excess water building up near your drain field, which slows down the treatment process.

Preserve your records in order to expedite the completion of any future repairs.

• Pumping a small septic tank (up to 750 gallons) costs between $75 and $150
• Pumping a medium septic tank (up to 1,500 gallons) costs between $200 and $400
• And pumping a large septic tank (up to 2,500 gallons) costs between $500 and $1,000. Pumping a large septic tank (up to 2,500 gallons) can cost between $500 and $750
• However, it is not recommended. The cost of replacing the filter is between $200 and $300. The typical cost of replacing PVC pipes and fittings is between $50 and $200. A new submersible pump costs between $300 and $500 on average. When replacing the complete system, plan to pay at least $3,000 and as much as $20,000, depending on the size and condition of your system.

Appliances and Your Septic System

Your septic system is directly impacted by the appliances that you use on a daily basis. When used incorrectly, they can cause harm to your system as well as decreased efficiency and the need for costly repairs. The following are examples of appliances that have a direct impact on your septic system:

• The usage of trash disposals: If you have a stand-alone septic system, it is suggested that you avoid using your waste disposal completely. The use of a garbage disposal increases the quantity of solids that pass through your system, causing the scum and sludge layers in your septic tank to accumulate. Hot tubs: Draining all of the water from a hot tub at the same time can cause serious damage to your septic system very quickly. As an alternative, the water should be cooled and drained onto sections of your land that are far away from the septic tank and drain field. Machines to wash clothes: Because, as previously said, more water is consumed, the more water is processed via the septic system. If you overburden your septic system, the likelihood of it failing increases significantly. To avoid putting too much water through the system, it is advised that you use high-efficiency washing machines and limit the number of loads you perform each day.

Signs That It’s Time to Pump

Some specialists, as part of their routine maintenance and service inspections, may pump the septic tank when it is necessary. However, it is possible that your septic system will require pumping before your regularly planned maintenance. That is why it is critical to be aware of the indicators that indicate that it is time to pump your septic system.

• If the grass or plants surrounding your tank seem healthier than the rest of your yard, you may have a leak or an overflowing tank that has to be pumped. It’s a good idea to get your tank examined if water drains slowly within the house (toilet, washing machine, sinks), before the sluggish draining turns into a backup situation. There are various symptoms that your septic tank has reached the point where it is necessary to pump it immediately. Please contact your septic company as soon as possible if you observe any of these symptoms
• Back-up of waste water: Backups may occur anyplace there is a drain, including in bathtubs, sinks, and toilets, among other places. Always avoid attempting to clean wastewater since it can be exceedingly hazardous to one’s health. If you have standing water in your yard, particularly around the septic tank, you should investigate it. In the event that you notice any unpleasant scents in your yard, it is usually time to bring in the professionals.

Why You Should Pump Your Septic

There are a multitude of reasons to have your septic system pumped, beginning with the fact that it is significantly healthier to keep it in good working condition. A septic tank that is not pumped on a regular basis may overflow, polluting your water and posing significant health risks. Pumping your septic tank is not only beneficial to your health, but it is also beneficial to your bank account. The failure of a system that does not get regular and sufficient pumping is unavoidable. And when a system fails, it must be completely reinstalled, which is significantly more expensive than simply paying someone to service it.

• Pumping your septic tank also helps to avoid backups and smells from accumulating.
• Wastewater backlog may cause property damage, costly repairs, and health problems, and it is generally something you want to avoid at all costs.
• Consult with your septic provider to determine the most appropriate timetable.
• It takes place on average every two to four years on average.

What Causes Septic Overflow?

A variety of factors might contribute to a septic overflow. The following are some of the most prevalent causes:

• Insufficiency of bacteria in a septic tank allows water and other liquid waste to pass through to the drain field, resulting in a clogged septic tank. However, if your bacteria levels are poor, the solids will not be broken down and your system will soon fill up, resulting in an overflow. In order to prevent destroying the microorganisms in your sewage plumbing, avoid flushing bleach, chemical cleansers, and other disinfectants down the drain. Objects clogging up the flow and design flaws: Wastewater is routed via a system of pipes before entering the tank, and then through still another set of pipes before exiting the tank and entering the drain field. Nothing can move through correctly if these pipes get blocked, resulting in an excess of water. Plants in close proximity to the drain field can also cause problems since the roots of the plants might interfere with the pipes. Improper design is also a key contributor to overflow because if the drainage pipes do not have the right slope, nothing will be able to go through them effectively. In this instance, it is necessary to replace the pipes. Septic difficulties are not commonplace after big rains or major storms, and this is especially true after heavy rainfall. In many cases, this extra water causes flooding in the area around the drain field, making wastewater flow out of your septic system hard to achieve. Flooding of your drainage system results in water being forced backward through your system and into the drains of your house. Maintenance that is not up to par: It is also important that your septic system receives enough and correct maintenance, which includes pumping the septic tank on a regular basis. Overflow is almost certain if the tank is not pumped when it should be (every two to four years on average)

Fixing Overflow

Septic overflow is something you should want to prevent at all costs. Along with producing strong odors, it frequently causes significant damage to the septic system as a whole, resulting in the need for costly repairs. However, if overflow does occur, there are steps you may do to prevent it from occurring again.

• When possible, avoid pumping the tank: If the problem is in the tank, pumping your septic tank is a sure-fire approach to resolve overflow. However, it should never be used as a first line of defense. It is the weight of the solid waste in the tank that holds the drain field in place in the event that it gets inundated. As a result of emptying the tank, it may begin to creep toward the surface, causing pipes to get damaged or dislodged. If that happens, you’ll be faced with a whole new set of problems to deal with. Inspect the tank as follows: When flooding or overflowing occurs, it is critical to do a tank examination. Even while this does not necessarily imply that the tank needs to be pumped, it is a good idea to inspect the tank if there is a septic overflow situation. After the earth has dried, a professional should be called in to complete the job. If there is any damage to the tank, you will be able to deal with the situation more quickly. Keep an eye on your water consumption: There is a strong likelihood that if the drain field becomes flooded, the water will run back into the septic tank, causing it to overflow. It is thus suggested that you reduce your water consumption as a result of this. Reduce the amount of time you spend in the shower and refrain from using your dishwasher or washing machine until the flooding has been fixed.

Maintenance Is Key to a Healthy Septic System

Maintaining your septic tank on a regular basis is the most effective strategy to ensure that no problems arise. It is recommended that you have a professional service examine your system on a regular basis and do routine maintenance, but you may undertake your own system inspections as well. Water leaks and unusual pools of water should be observed since they may indicate a problem with your water supply or drainage system. By lifting the lid from your septic tank, you can also assess the amount of sludge that has accumulated in the tank.

Septic tanks have no difficulties dealing with the waste created by a household, but it does not rule out the possibility of problems developing.

It is also important not to overburden your system with more impurities; accumulation and other difficulties may cause problems much more rapidly than you might expect.

Additionally, doing regular checks on your tank in addition to expert service is a wonderful method to ensure that the system continues to operate efficiently.

Use Our Free Service and Find Septic Tank Companies Near You

Medium: $75-$200; Running $300+

Fracturing the Soil: $1,000-$2,000+

• According to Laundry-Alternative.com, the cost of dumping out a septic tank ranges from $75 to $200, but it may cost as much as $300 or more in some areas of the nation. It should be done every 1-3 years, depending on the size of the tank and the number of people that use it. Pumping out bigger tanks (between 1,500 and 2,500 gallons) might cost between $200 and $350. According to officials in Olympia, Washington, installing a high-quality filter to protect your leachfield/drainfield would cost around $200-$300 dollars. The proper pumping of the tank, cleaning of the drainfield lines, installation of filters, and a process known as fracturing the soil, which involves inserting a hollow tube into the ground and injecting a 300-pound blast of air, can sometimes bring a failing septic system back to life at a cost of $1,000 to $2,000 or more.

Related articles:Septic System,Sewer Line Replacement,Unclogging a Toilet What should be included:

• One of the most important components of a septic system is a tank, which is connected to a soil absorption system (drainfield or leachfield). Heavy materials are allowed to drop to the bottom of the tank, where bacteria decomposes the solids into sludge, which is then disposed of. Scum is formed when grease and other light particles float on the surface of the water. Over time, a significant amount of sludge and scum accumulates. When they are pumping, they are prevented from running out of the tank and clogging the drainfield/leachfield. When it comes to septic systems, the Maryland Cooperative Extension presents a visually appealing explanation, while the Iowa Onsite Wastewater Program highlights the need of frequent tank pumping
• Although biological additions are unlikely to be dangerous, certain chemical additives that are touted as removing the need for tank pumping may in fact cause damage to the septic system
• Take note of this. According to Turtlesoft.com, pumping out a septic tank takes approximately 4-5 hours of manual labor or approximately 2 hours with a backhoe or other equipment. The process comprises locating the tank, excavating the access port (pumping should be done through the manhole, not the smaller inspection port), pumping out the tank (leaving nothing inside), checking for leaks, and finally backfilling and regrading the site. A septic tank should never be entered, as they are exceedingly unclean and may contain lethal gases. Many states require that septic tanks be pumped out only by professionals who have been trained and licensed to do so.

• Others charge a set cost for identifying the septic tank and digging down to the access port, while others charge a rate based on the number of hours spent on the project. If you’re prepared to do the finding and digging yourself, you may be able to save some money, depending on how much time is needed. Consider drawing a map of the tank’s location in relation to the home or taking photographs while it is uncovered
• This information may be useful for future pumping or other septic service needs

• Check with your local health agency to see if they have a list of septic cleaning firms that are licensed and insured. Inquire about training and previous experience. Check to see if the firm is legally bonded, insured, and licensed in your jurisdiction. The National Onsite Wastewater Recycling Association can assist you with referrals to septic service merchants and suppliers.

CostHelper News What People Are Paying – Recent Comments Page 2 of 2-Previous12

Posted by:Robert E in Lancaster, PA.	Posted:October 29th, 2020 11:10AM
Type:pump and inspection	Company:John Kline

TWP requires inspection and pump every two years – two 500 gallon tanksused Klines for the last 3 services they are always on time and priced right good people to deal with

Posted by:ToptonMan in Mertztown, PA.	Posted:April 3rd, 2020 09:04AM
Type:Septic	Company:Clifford Hill

Posted by:GARY IRWIN in LITHFIELD PARK, AZ.	Posted:September 28th, 2019 05:09PM
Type:SEPTIC	Company:PARADISE SEPTIC

I had the lids uncovered and ready for them. I paid extra do to dirtgravel that had got in from a broken lid. I still need to get the rest of the gravelrock removed from the tank before I sell the house. Does anyone have any ideas to do this at a reasonable price?

Posted by:Justinedege in Fultonville, NY.	Posted:August 27th, 2019 03:08PM
Type:Septic	Company:Adirondack septic tank corp

500 gal tank, we dug down to the access port, had it ready to go, came to 253$. Their fee is for 1000 gal or less, if there’s more than 1000gal you’d have to pay to have them comeback or leave what was left

Posted by:Connie Brooks in Woodstock, GA.	Posted:March 28th, 2019 06:03AM
Type:	Company:Swat septic

Posted by:a user in Suffolk county, NY.	Posted:March 19th, 2019 10:03AM
Type:Pumping only	Company:Mr.Pump

Posted by:Chardon in Chardon, OH.	Posted:January 24th, 2019 04:01PM
Type:Pump out	Company:Judd

I wasn’t home when they did it so I do not know about digging anything up or anything. They said it was extremely full (it had been pumped about 2 years prior) and that it needs to be pumped every 2-3 years. Only 2 adults living there and part tine 2 kids

Posted by:ET in Camp Verde, AZ.	Posted:January 14th, 2019 04:01PM
Type:Pumping out concrete septic tank	Company:

Even with me digging out the access lid (which was a big hassle) everyone is still well over $350 in this part of the country. I think this website is whacked on the price range it provides.

Posted by:Paula C. in Navarre, FL.	Posted:December 11th, 2018 06:12AM
Type:	Company:JLG septic

Posted by:Billie J Moore in Huntsville, AL.	Posted:October 25th, 2018 02:10PM
Type:Septic	Company:Roto Rooter

I called to have the tank pumped after experiencing odors in the house. It had never been done since we moved in 10 years ago. Not sure if previous owners ever had it done. I was quoted a price of $300.00 plus the dumping fee. When Roto Rooter showed up and after he checked the location of the tank he informed me the cost was going to be $553.00. He never explained why the increase in cost. But I needed it done. After he completed the job he informed me the tank was in really good condition and it had been almost full.

Now the tank is empty but i still have the odor in the house!

Posted by:a user in Leesburg Florida, FL.	Posted:March 29th, 2018 06:03AM
Type:Pumping	Company:

You need to change your scale that’s from like the 1970s and 80s $75-$200 it cost $100 just to get rid of the septic waste for the company how could a company do it for $75 and do the proper job raise your rates

Posted by:a user in chandarpur, Other.	Posted:November 13th, 2017 05:11PM
Type:septic tank cleaning	Company:

Posted by:Shar Olsten in Gilmer County, GA.	Posted:October 25th, 2017 12:10AM
Type:Septic	Company:Tows Septic

Had to do inspection and pump out of septic for the sale of house for new Buyes. This is so we could close. Tows Septic is the company we used and they reported that the water line was running across the septic tank underground. Reported after digging that there was a small leak on water line and that they repaired it. Less then a week later water line completely breaks and all water to house lost. No water at all to house to be able to be used. Never had a problem with water or pressure if water to house.

They broke the underground main water line when digging to locate septic for inspection and pump out.

Charging a bill of $1000 for the work.We are now in the middle of repairing the broken water pipe and are having company to come back out to repair the damage. Yet to see if they are going to charge us for their mistake.Hope ther ins

Posted by:in Woodstock, GA.	Posted:September 6th, 2017 10:09AM
Type:Septic pumping	Company:Superior Septic

Pump tank $489 Dig/locate $250 Filter $150 Excessive overflow $125 1500 pumped!

Posted by:a user in plantation, FL.	Posted:May 11th, 2017 12:05PM
Type:pumping	Company:jerry’ s septic

Posted by:Amine in Hackettstown, NJ.

Posted:March 26th, 2017 08:03AM

We pumped both tanks and leach field over 1000 gallons for $900 water jet the leach field lines for 802 and another 275 for the truck to drain the water from the lines jetting. Not sure if this will solve the problem, but we are trying our best to avoid the cost of replacing it

Posted by:hsemedo Semedo andrews in Seekonk, MA.	Posted:February 6th, 2017 04:02PM
Type:Septic	Company:Devineson septic system

I couldn’t believe how prompted Michael was after I explained on the phone what the problem was i experiencing. He was very professional and friendly.

Posted by:Ken Meyer in Valdosta, GA.	Posted:January 6th, 2017 10:01AM
Type:pumping and jetting lines	Company:A 1 Septic Pumping

They did a great job both pumping and jetting. I would recommend them highly and will use them again. Not overpriced like most of the companies. They explained everything plainly.good people.

Posted by:Vince Dell in Hamburg, NY.	Posted:December 6th, 2016 05:12PM
Type:Septic	Company:Delo

I just purchased a home and the previous owner had no idea when the septic was last pumped, so it probably had gone 15-20 years without any maintenance. Home inspector said “just get it pumped and serviced so you know what you’ve got”.I called in Delo septic from Holland NY. Over the phone the owner walked me through the process. Since I had no idea where the septic was, he said the first task was to locate it. Delo out two trucks, one pump truck and one water jet / service truck to locate and snake any lines.

Very professional company, great to work with.

Posted by:tracy lawson in Dowagiac, MI.	Posted:October 21st, 2016 04:10AM
Type:3000 gal tank	Company:Turner septic

Idk husband is freakin out said we paid to much.but we had a bigger tank then we thought we were quoted for a 1500 ($225)and a 2500 ($325)gal tank turned out to be 3000 gal tank.

Posted by:Sherry1967 in Sacramento, CA.	Posted:March 4th, 2016 07:03PM
Type:1500g septic	Company:Reliable Septic

Showed up on time. Did the job for what they said they would.

Posted by:a user in Hendersonville, NC.

Posted:January 9th, 2016 05:01AM

My question is are they suppose remove all the debree?

Posted by:Bakah in Hopewell junction, NY.	Posted:September 8th, 2015 05:09AM
Type:Cement tank	Company:Hopewell septic

Quoted 265. To pump out tank by Hopewell Septic pumping. When job completed said he had to spend extra time to clean out tank and charged me extra 150.00. Being a nice guy I said ok. When my son heard about the price increase he had a fit, he said the guy took advantage of me because I was an old man. The most I should have paid was for a1250 tank as that is what I had. I should have only paid the price quoted to pump out tank. Was never told it would cost more to clean out the the 4 inches of crud in bottom of tank.

Posted by:Jerry123 in Plymouth, CT.	Posted:August 12th, 2015 08:08PM
Type:Septic	Company:

1250 gallon Septic tank pumped out.

Guy had to dig up one access cover because I wasn’t aware there were 2. Hadn’t been cleaned out in almost 3 yrs. Page 2 of 2-Previous12 External Resources:

More Articles on the Subject of the Home and Garden

Check Out All Costs for Home and Garden		How Much Does a Propane Tank Cost?		How Much Does a Plumber Cost?		How Much Does Pressure Washing Cost?

CostHelper is based in Silicon Valley and provides consumers with unbiased price information about thousands of goods and services. Our writers are experienced journalists who adhere to our stricteditorial ethics policy.