Septic tanks are typically rectangular in shape and measure approximately 5 feet by 8 feet. In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground.
- In all states septic tanks are required to be at least 5 feet from the house. Most are between 10 and 25 feet away. When you feel the probe strike flat concrete, fiberglass or polyethylene, you’ve located the tank.
How do I find out where my septic tank is located?
Follow the Main Sewer Line Look for a pipe that’s roughly four inches in diameter that leads away from your house. Remember the location of the sewer pipe and where the pipe leaves your home so you can find it outside. The sewer pipes will lead to where your septic tank is located.
How far down is septic tank lid?
Often, septic tank lids are at ground level. In most cases, they have buried anywhere from four inches to four feet underground.
How far is septic tank from house?
Septic tanks are required to be at least 5 feet from the house, although most are between 10 and 25 feet away.
What are the signs that your septic tank is full?
Here are some of the most common warning signs that you have a full septic tank:
- Your Drains Are Taking Forever.
- Standing Water Over Your Septic Tank.
- Bad Smells Coming From Your Yard.
- You Hear Gurgling Water.
- You Have A Sewage Backup.
- How often should you empty your septic tank?
How many lids are on a septic tank?
In order to make repairs or perform regular maintenance or cleaning/pumping of the tank, access must be provided. There are usually two lids located at the top of the septic tank-one located over the inlet “T” and one located over the outlet “T” (see “Septic Components: Septic Tanks”).
How deep are drain fields buried?
A typical drainfield trench is 18 to 30 inches in depth, with a maximum soil cover over the disposal field of 36 inches.
Should septic tank lids be buried?
In most cases, all components of the septic tank including the lid are buried between 4 inches and 4 feet underground. Unless the septic tank has special risers that position the lid at ground level, you’ll have to dig for it.
Does shower water go into septic tank?
From your house to the tank: Most, but not all, septic systems operate via gravity to the septic tank. Each time a toilet is flushed, water is turned on or you take a shower, the water and waste flows via gravity through the plumbing system in your house and ends up in the septic tank.
Can I build a deck over my septic tank?
You should never build a deck over a septic field; doing so will prevent the natural draining and dissipation of the effluent. This can ruin the septic system, not to mention releasing foul smells into the air all around your deck. The dissipating effluent can also rot the deck from underneath.
How close can leach field be to house?
Common guidelines require at least 50′ clearance distance between a well and a septic system tank or 150′ between a well and a septic drainfield or leaching bed but you will see that different authorities may recommend different distances. Local soil and rock conditions can make these “rules of thumb” unreliable.
Can a septic tank never be pumped?
What Are the Consequences of Not Pumping Your Tank? If the tank is not pumped, the solids will build up in the tank and the holding capacity of the tank will be diminished. Eventually, the solids will reach the pipe that feeds into the drain field, causing a clog. Waste water backing up into the house.
What to do after septic is pumped?
After you have had your septic tank pumped by a trusted septic company, there are some things you can and should do as the septic system owner.
- 1) Get on a Schedule.
- 2) Take Care of the System.
- 3) Know the Parts of Your System.
- 4) Check Other Possible Issues.
Why doesn’t grass grow over my septic tank?
Lawn grass species prefer moist, high pH soil, and direct sunlight. Growing grass over a septic tank can be challenging due to the acidic, low-pH soil resulting from sewage runoff into the leach field.
How Deep Are Septic Tanks Buried? (And How Do You Find It?)
It is possible that this content contains affiliate links. It is possible that I will receive a commission if you make a purchase after clicking on an affiliate link. In addition, as an Amazon Associate, I receive a commission from qualifying purchases.- Septic tanks, for example, might become a requirement in more remote places where some services are not readily available or easily accessible. After all, we rely on contemporary conveniences such as adequate plumbing to make our lives more comfortable and easy.
Discovering the location of your septic tank in your yard, as well as what may be grown near or on top of it, will help you determine how much of your yard is suitable for regular gardening.
You May Not Know
Despite the fact that it appears to be something that every homeowner should be aware of, understanding how deep a septic tank is buried can be difficult to determine. Perhaps you forgot about the septic tank after it was installed years ago, or perhaps you are moving into a house that already has a septic tank constructed in previously. Whatever the situation, determining the depth of your septic tank can be a challenging task under the circumstances, especially if you are unsure of the location of the lids.
How to Locate Your Septic Tank
Perhaps you’re unsure of the location of your septic tank on your property and are attempting to identify it on your own. There are really quite a few quick and simple methods for determining the location of your tank without having to go through a lengthy process. The first method is to follow the path laid out by your sewer lines. Typically, the tank and your drain field will be placed along a line parallel to the sewage line that goes from your property out to the street. Your home’s crawl area or basement may even have a four-inch sewage line that leads away from the structure of the building.
- Follow the pipe all the way across the yard, checking every few of feet to make sure you’re still on the right track, and then turn around.
- When you don’t feel like digging around in your yard, you can always look up your house’s address in the county records database.
- Diagrams with measurements and even the particular location of where the septic tank is located should be included in this document.
- You can also choose to dig your lid out from under it.
- This is what will tell you how many lids are on your septic tank and how many are missing.
- The majority of septic tanks are rectangular in shape and measure around in the neighborhood of 5′ x 8′ in size.
- If you are unable to determine the position of your septic tank using a probe, you will need to do a shallow excavation around the perimeter of the tank using a shovel in order to finally locate the lid.
- First, look for visual cues to help you.
- There is no doubt about it, this will tell you exactly where the tank is located beneath.
- Take a look at the plumbing in your structure, as well as the overall state of the property, to get a good sense of where the tank is situated.
It will be full to just a few inches below the underside of your tank lid when your tank is fully charged to its regular level of filling capacity. If the lid is constructed of plastic, fiberglass, or steel, the upper surface of the lid may have some variation in color or texture.
Where Should the Septic Tank Be Located?
If your property does not presently have a septic tank, but you are interested in the possibility of installing one, it is critical that you understand where it should be installed. Ordinarily speaking, most septic tanks will be situated between 10 and 25 feet away from the house. You should bear in mind that septic tanks cannot and should not be located any closer than five feet from your residence. Using a probe, you may search for flat concrete to determine whether or not a tank has previously been put on a property that you have recently purchased.
Planting Above a Septic Tank
Even though it may not appear to be the finest idea in the world, putting vegetation over a septic tank may really be perfectly acceptable as long as you choose the appropriate plants to grow. Not only is it perfectly OK to do so, but it may also be rather helpful depending on what you are planting and harvesting. It is possible to avoid erosion in your tank with the correct sort of vegetation, and it is even possible to absorb some of the additional moisture that might accumulate in your drain field.
- Perennial plants and grasses (as previously indicated) are the ideal kind of plants to use in and around your drain field and septic tank.
- You can use non-woody ground covers for a similar purpose as you do with woody ground covers.
- Take, for example, the expanding environment.
- If you don’t have access to enough sunshine, you might want to choose a shade garden plant instead.
- Keep in mind that the soil that surrounds the septic tank drain field will typically be wetter than the surrounding soil in the rest of the yard.
- As a result, choose a perennial such as a hollyhock, wild violet, or bee balm to ensure that you cover all of those bases when planting.
- A septic system beneath these plants does not imply that deer will avoid the area because of its presence on your property.
- Something like a spring bulb or an attractive grass that the deer aren’t generally interested in eating.
Plants That You Don’t Want to Grow
Just because you have the option of planting over your septic tank does not mean that everything is appropriate for this situation. A few plants should be avoided at all costs while landscaping around your septic tank, particularly huge trees that are known for their rapid growth. On the same vein, shrubs and trees with aggressive root systems are some of the worst plants to grow around your home. These roots will shoot out in quest of water, and they will not be concerned with where they locate it.
The infiltration of those roots into your septic drain field might result in catastrophic damage to your septic tank and drain field.
It’s possible that you’ll need a complete replacement.
Many other plants have strong root systems that you should avoid growing anywhere near your septic tank or drain field, and there are lots of them.
How Your Septic System Works
It is possible that understanding how your septic system operates may help you better manage, maintain, and care for it. Aside from that, it is just a large tank buried in the ground that collects your waste (which is true, but still). In remote locations, there may be a deficiency in sewage infrastructure. Because not every rural location is the same, it is not a given that septic systems will be required in your local rural area. The septic tank, in any case, serves as a form of wastewater treatment facility when there are no sewage lines available.
- The tank is designed to be waterproof, ensuring that your wastewater does not leech into the surrounding environment.
- Solids sink to the bottom of the container, scum rises to the top of the container, and liquids sit in the center of the three levels described above.
- The wastewater that is being discharged from your home is the cause of the exit.
- This liquid is carried out of your home through a pipe and into a bigger portion of your sanitary sewer system.
- Your drain is typically comprised of a network of perforated PVC pipes that are put underground in trenches to collect water and waste.
- Because the drains are perforated, the wastewater is allowed to seep out into the crushed gravel or stone, and then eventually into the surrounding soil.
- The natural evaporation process will then take care of any surplus moisture in the soil, unless you do something to prevent the water from flowing out of the pipes.
How to Plan a Septic Field
The tank is only one component of the whole equation. You’ll also need a drain field to catch all of the liquid waste that will be generated. When you are planting around your septic tank, the drain pipes are the most significant source of worry. Having those aggressive roots infiltrate and ruin your septic drain system is the very last thing you want. When this occurs, it can prevent your septic tank from emptying correctly and potentially cause it to get contaminated by groundwater. According to a solid rule of thumb, the less horticultural labor you have to do in close proximity to your septic tank, the better.
Just remember that they must be planted every year, so keep that in mind while planting them.
The first step is to fill in the septic drain field with earth.
In the second instance, too much mulch is being applied to the area in question. The third issue is that you may be watering your plants more than you should be. All three of these factors can impair the capacity of your drain field to evaporate in a typical manner.
How to Find Your Septic Tank
Over time, all septic tanks become clogged with sediments and must be pumped out in order to continue functioning properly. Septic tank lids are frequently located at ground level. The majority of the time, they have been buried anywhere between four inches and four feet underground. In the event that you have recently purchased a property and are unsure as to where your septic tank is located, this article will give instructions on how to identify your septic tank. Noteworthy: While every property is unique, septic tanks are usually typically huge and difficult to build.
5 Ways to Find Your Septic Tank
All septic tanks eventually become clogged with sediments and must be pumped out in order to function properly. Most of the time, septic tank lids are located below the surface of the earth. The majority of the time, they have been buried anywhere between four inches and four feet underground. If you’ve recently purchased a property and are unsure of the location of your septic tank, this article will give instructions on how to identify your septic tank and pump it. Helpful Hint: While every property is different, septic tanks are usually typically enormous and difficult to build.
How To Find My Septic Tank
- What is a septic tank
- How do I know if I have a septic tank
- And how do I know if I have a septic tank Identifying the location of your septic tank is critical for several reasons. The Best Way to Find a Septic Tank
- What to Do Once You’ve Discovered Your Septic Tank
You may have fallen in love with your new house because of its appealing good looks and characteristics, but there is almost certainly more to your new home than meets the eye. In many cases, the characteristics that make your house run more effectively and allow you to live a pleasant, contemporary life are not readily apparent. Septic tanks, for example, are an important part of your home’s infrastructure. A septic system is responsible for regulating and managing the wastewater generated by your home.
“How can I locate my septic tank?” is one of the most often requested inquiries we receive.
When your tank’s lid is difficult to locate – especially if you are not the original homeowner – you may be at a loss for what to do or where to look for the lid when you need it.
The majority of the time, all of the components of the septic tank are buried between four inches and four feet below ground level.
In order to do so, it is necessary to first comprehend the functions of septic tanks and septic systems and why it is important to know where yours is located.
How to Locate Your Septic Tank
Your septic tank’s location is not a closely guarded secret. There will be a method for you to locate it and make a note of its position for future reference, and below are a few examples of such methods.
What Is a Septic Tank?
Having a functioning septic tank is an important aspect of having an effective septic system. In the United States, around 20% of households utilize a septic system to handle their wastewater. Houses in rural parts of New England are the most likely to have a septic system, with residences in the Eastern United States being the most prevalent location for septic systems. When there are few and far between residences, it is typically more efficient and cost-effective to employ a septic system to manage wastewater rather than relying on a public sewage system to handle waste water.
- Typically, a septic tank is a container that is waterproof and composed of a material such as concrete, polyethylene, fiberglass, or a combination of these.
- An important function of a septic tank is to hold on to wastewater until any particulates in the water separate themselves from the water.
- Any liquid that remains in the tank eventually drains into a leach field or a drainfield, where it is known as “effluent.” The dirt in the leach field aids in the filtering of the water and the removal of bacteria, viruses, and other pollutants that may be present in it.
- Septic tanks erected in Onondaga County must contain input and outlet baffles, as well as an effluent filter or sanitary tees, in order to effectively separate particles from liquids during the treatment process.
How Do I Know If I Have a Septic Tank?
What is the best way to tell if your home has a septic tank? There are generally a few of different methods to tell. Examining your water bill might help you identify whether or not your house is served by a septic system or is part of the public sewage system in your neighborhood. If you have a septic system for wastewater management, you are likely to receive a charge from the utility provider for wastewater or sewer services of zero dollars. In the case of those who are fortunate enough to have a septic system, it is likely that they may not receive any water bills at all.
- A lack of a meter on the water line that enters your property is typically indicative of the fact that you are utilizing well water rather than public utility water, according to the National Association of Realtors.
- A septic system is likely to be installed in your home if you reside in a rather rural location.
- Septic systems are likely to be installed in all of these buildings, which means your home is likely to be as well.
- When a septic tank is present, it is common to find a mound or tiny hill on the property that is not a natural structure.
Checking your property records is a foolproof method of determining whether or not your home is equipped with a septic system. Your home’s building permit and drawings will almost certainly include details concerning the existence (or absence) of a septic tank on your site.
Why It’s Important to Know the Location of Your Septic Tank
You might wonder why you should bother trying to discover out where your septic tank is. There are several important reasons for this:
1. To Be Able to Care for It Properly
The first reason you should try to locate your septic tank is that knowing where it is will help you to properly repair and care for it in the future. The standard guideline is to avoid erecting structures or placing heavy objects on top of the septic tank. It’s possible that you don’t want to park your car or truck on top of it, and you don’t want visitors to your house to park their cars on top of it, either. Due to the weight of the automobiles, there is a possibility that the tank would collapse due to excessive pressure.
2. If You Want to Landscape or Remodel Your Property
If you want to build an addition to your home or perform some landscaping around your property, you will need to know where your septic tank is located. Nothing with deep or lengthy roots should be planted on top of or in the area of your tank, since this can cause problems. If roots are allowed to grow into the pipes of your septic system, it is conceivable that your system will get clogged. When you know where the tank is going to be, you may arrange your landscaping such that only shallow-rooted plants, such as grass, are in close proximity to the tank.
For starters, the tank’s weight might lead it to collapse due to the weight of the construction.
3. If a Problem With Your Tank Occurs
Knowing where your tank is buried might also assist you in identifying problems as soon as they arise. Consider the following scenario: you wake up one morning and see that there is flooding or ponding water in the region surrounding your septic tank – a sign that your system is overwhelmed and that an excessive amount of water is being utilized all at once.
4. Ease of Getting It Fixed
Once you have determined the location of your sewer system, you can quickly send a plumber to it in the event that something goes wrong with the system, saving everyone both time and money. Get in Touch With A Plumber Right Away
1. Use a Septic Tank Map
First and foremost, make use of a road map. Using a map is frequently the quickest and most convenient alternative. Most counties keep records of the installation of septic tanks at all of their residents’ residences. These maps should include schematics that illustrate the specific placement of the tank on the land, as well as measurements that allow you to measure and locate the tank’s exact location on the property. Never mind that landmarks may shift over time depending on when the tank was built, so if there are a few more shrubs or a tree nearby, don’t rule out that location as a possibility.
- If you are unable to locate a map or other paperwork that identifies the location of your septic tank, there are a few locations to try to see if you can obtain a map of the area.
- The county health department is responsible for keeping track of septic systems.
- A septic tank’s position could be depicted on a survey map, for example.
- The creation of your own map and documentation may be worthwhile if you cannot locate a map or blueprint of your property and nothing appears to be on file regarding it at the county health department or another municipal agency.
In this way, if you ever decide to sell your property, you will be able to supply the new owner with everything they will need to locate the tank and properly manage their septic system.
2. Follow the Pipes to Find Your Septic Tank
Whether or not there is an existing map of your septic tank on file, or whether or not you choose to develop one for future reference or for future homeowners, you will still need to track down and find the tank. One method of accomplishing this is to follow the sewer lines that lead away from your residence. The septic tank is situated along the sewage line that goes from your home and into the yard, as we’re sure you’re aware. Find a four-inch sewer pipe in your basement or crawl space. This is the line that will lead to your septic system and should be accessible from the ground level.
- In general, though, you’re searching for a pipe with a diameter of four inches or more that leaves your home via a basement wall or ceiling.
- By inserting a thin metal probe (also known as a soil probe) into the earth near the sewage line, you can track the pipe’s location.
- The majority of septic tanks are located between 10 and 25 feet away from your home, and they cannot be any closer than five feet.
- Going via the sewage line itself is another method of locating the septic tank utilizing it.
- Drain snakes are typically used to unclog clogs in toilets and drains, and they may be used to do the same thing.
- When the snake comes to a complete halt, it has almost certainly reached the tank.
- While drawing the snake back, make a note of how far it has been extended and whether it has made any bends or turns.
- When looking for your septic tank, you may use a transmitter that you flush down the toilet and it will direct you straight to the tank.
3. Inspect Your Yard
Septic tanks are designed to be as unobtrusive as possible when they are erected. With the passage of time, and the growth of the grass, it might be difficult to discern the visual indications that indicated the exact location of your septic tank’s installation.
However, this does not rule out the possibility of finding evidence that will take you to the location of your septic tank in the future. First and foremost, you want to rule out any potential locations for your septic tank, such as:
- Under a road or similar paved surface, for example. Right up against the house (the tank must be at least five feet away)
- Directly in front of the home Immediately adjacent to your well (if you have one)
- In close proximity to trees or densely planted regions
- In the shadow of a patio, deck, or other building
Once you’ve ruled out any potential locations for your tank, it’s time to start hunting for indications as to where it may be hiding in plain sight. Keep your eyes peeled as you go about your property, looking for any inexplicable high or low points that might suggest the presence of an underground tank. When looking at your property, you could see a hill or mound on the ground, which is frequently an indication that there is a septic tank nearby. One further item to consider while searching for the right septic tank for your home is the amount of grass or other foliage in your yard.
Alternatively, if the tank was not adequately buried, you may observe a “bald patch,” which is an area where the grass is struggling to grow in the vicinity.
4. Talk to Your Neighbors
If your neighbors have septic systems as well, they may be able to assist you in locating your tank. Inquire of your neighbors about the location of their septic tanks in relation to their residences. Having a polite conversation with your neighbors regarding septic systems not only provides you with a means to figure out where yours is, but it may also serve as a friendly introduction to the other residents of your community.
5. Look for Your Septic Tank Lid
It is only the first step in the process to discover where your septic tank is located. After you’ve located your tank, the following step is to locate the lid. You can locate it with the help of your soil probe. The majority of septic tanks are rectangular in shape and measure around five feet by eight feet. The perimeter of the tank should be marked with a probe once it has been probed around. A shallow excavation with a shovel within the tank’s perimeter and near the center (or broken into halves for a two compartment tank) should show the position of the lid or lids if you are unable to feel them by probing.
The tank itself is likely to be filled with foul-smelling vapors, if not potentially hazardous ones.
What to Do After You Find Your Septic Tank
Once you’ve determined where your tank is, it’s time to bring in the specialists. Trust us when we say that opening a septic tank is not something that just anybody wants to undertake. Concrete septic tank lids are extremely heavy and must be lifted using special lifting gear in order to be removed. Since the vapors are potentially dangerous due to the contents of the tank, please respect our advice and refrain from attempting to open the tank yourself. An exposed septic tank can be hazardous to anybody wandering around your property’s perimeter, and if someone were to fall into it, it might be lethal owing to the toxicity of the sewage in the tank.
However, before you send in a team of experienced plumbers, there are a few things you can do to ensure that others do not experience the same difficulty locating the tank and to make locating the tank in the future easier.
1. Mark Its Location
The likelihood is that you will not want to post a large sign in your yard that reads “Septic Tank Here!” but you will want to leave some sort of marking so that you can quickly locate the tank and lid when you need them. In an ideal situation, the marker will be substantial enough that it will not blow away in the wind and will not be readily moved by children who are playing in the yard. A patio paver, a potted plant, or a decorative gnome or rock are just a few of the possibilities. In addition to putting a physical sign beside the septic tank, you may draw a map or layout of the area around it to illustrate its position.
2. Take Care of Your Septic Tank
Taking proper care of your tank may save you hundreds of dollars over the course of its lifetime. The expense of maintaining your system could be a few hundred dollars every few years, but that’s a lot less than the thousands of dollars it might cost to repair or replace a damaged tank or a malfunctioning septic system. Two strategies to take better care of your septic tank and system are to avoid utilizing your drain pipes or toilets as garbage cans and to use less water overall. Things like paper towels, face wipes, and cat litter should not be flushed down the toilet since they are not designed to be flushed.
In addition, installing low-flow faucets and high-efficiency toilets can help you reduce the amount of water used in your home.
For example, you don’t want to be washing load after load of laundry or running your clothes washer at the same time as your dishwasher all at the same time.
Call a Professional Plumber
Maintenance of a septic system is not normally considered a do-it-yourself activity. In the Greater Syracuse region, whether your septic tank requires pumping out or cleaning, or if you want to replace your tank, you should use the services of a reputable plumbing firm to do the job right. If you’ve attempted to locate your septic tank on your own and are still unsure of its position, it may be necessary to enlist the assistance of a professional local plumber. Our team at Mr. Rooter Plumbing of Greater Syracuse can assist you with locating, maintaining, or replacing your home’s sewage tank.
Request an Estimate for the Job
How To Find Septic Tank Location: A Guide for Property Owners
The majority of individuals prefer to relax on their back patio or porch and take in the scenery rather than worrying about where their septic tank could be.
When you know exactly where your septic tank is, it will be much easier to schedule routine sewer line cleanouts and repair appointments. Continue reading to find out more about how to locate your septic tank.
Follow the Main Sewer Line
If you’re like most people, you like relaxing on your back patio or porch and taking in the scenery rather than worrying about where your septic tank could be. When you know exactly where your septic tank is, it will be much easier to schedule routine sewer line cleanouts and repairs. Learn more about how to locate your septic tank by continuing reading this article. 1.
Inspect Your Property
Imperfections in the terrain might sometimes provide clues as to where your septic tank is located. Septic tanks are often placed in such a way that you can scarcely know they are there. However, dips in the soil or tiny hills in the landscape may suggest the presence of a septic tank hidden beneath the ground. You may use your soil probe to find your septic tank if these dips or hills are located between five and twenty-five feet distant from your property line. Because most septic tanks are located between six inches and four feet underground, make sure you probe the soil to a sufficient depth before installing the tank.
While you are inspecting your property, keep a look out for the septic lid that may be missing.
These are often found at or slightly below ground level, depending on the situation.
- Paved surfaces
- Unique landscaping
- Your water well, if you have one
- And other features.
If you are still having trouble locating your septic system, you might inquire of your neighbors about the location of their septic tank on their land. Finding out how far away their septic systems are will help you figure out where yours might be hidden in your yard or garden.
Check the Property Records
Are you unsure about how to obtain this? Simply contact your county’s health department for further information. Check with your local health agency to see if they have a property survey map and a septic tank map that you can borrow. Perhaps you will be shocked to learn that there are a variety of options to obtain information about your property without ever leaving the comfort of your own residence. Building permits, for example, are frequently found in county records, and they may provide schematics with specifications on how far away from a septic tank a home should be, as well as other important information such as the size of the tank.
Most counties, on the other hand, keep records of septic tank installations for every address.
Don’t Try to Fix Septic Tank Issues Yourself
Septic tank problems should be left to the specialists. The Original Plumber can do routine maintenance on your septic tank and examine any problems you may have once you’ve located the tank. It is not recommended to open the septic tank lid since poisonous vapors might cause major health problems.
Getting trapped in an open septic tank might result in serious injury or death. While it is beneficial to know where your septic tank is located, it is also beneficial to be aware of the potential health dangers associated with opening the tank.
Schedule Septic Tank Maintenance
The maintenance of your septic tank on a regular basis helps to avoid sewer backups and costly repairs to your sewer system. You should plan to have your septic tank pumped out every three to five years, depending on the size of your tank and the number of people that reside in your home. The Original Plumber offers skilled septic tank and drain field maintenance and repair services at competitive prices. While it is useful to know where the septic tank is located, it is not required. Our team of skilled plumbers is equipped with all of the tools and equipment necessary to locate your tank, even if you have a vast property.
We are open seven days a week, twenty-four hours a day.
Frequently Asked Questions
A septic system is a system for the management of wastewater. Simply said, wastewater will exit your home through pipes until it reaches your septic tank, which is located outside your home. Septic tanks are normally located beneath the surface of the earth. Solids and liquids will separate in the septic tank as a result of the separation process. Eventually, the solids will fall to the bottom of the tank and the liquids will run out onto your leach field.
How do I know if I have a septic tank?
Even if there are no obvious signs of a septic tank in your yard – such as uneven landscaping – there are a few techniques to assess whether or not your home is equipped with an onsite sewage system. Checking your property records is the most reliable technique to ensure that you are utilizing the correct system. When you acquired your house, you should have received a copy of the septic system map with the property documents as well. Checking your electricity statement is another way to determine this.
If you’re also using well water, it’s possible that you won’t receive one at all.
What do I do once I locate my septic tank?
Once you’ve discovered where your septic tank is, there are a few things you should do. It is critical to clearly mark the position of your septic tank. With our inspection, pumping, and repair services, you can save time whether you need a sewer line cleanout or a septic tank maintenance job completed quickly. Make a note of the location of your tank so that you can find it again if necessary. It should be heavy enough so that it does not fly away in windy conditions. A creative approach to accomplish this without having an unattractive flag or marking in your yard is to use garden décor or a potted plant.
This way, you’ll have it for future reference and will be able to quickly locate the exact position if necessary.
Then contact The Original Plumber to have your septic system maintained on a regular basis. Preventing worse problems and the need for costly repairs down the line may be accomplished via proper septic system maintenance. All of the heavy lifting has been delegated to our team of professionals.
How to Find the Lid on a Septic System
All septic tanks eventually fill with sediments and must be pumped out on a regular basis in order to remain in excellent functioning order. If the tank’s lid is not on a riser at ground level and you are not the home’s original owner, you may be unable to determine where the lid is located. A typical septic tank is 4 inches to 4 feet underground, with all of its components, including the cover, buried between 4 inches and 4 feet underneath. This is true regardless of whether the septic tank is equipped with special risers that keep the lid flush with the surface of the ground.
Consult A Map
First, choose with the most straightforward choice. The installation of septic tanks at all locations is recorded in most counties’ permission records, which are kept on file for future reference. Typically, this will include a schematic indicating the placement of the tank on the land, as well as certain dimensions that will allow you to measure to the precise site of the tank. If your tank was placed before your county made it a requirement to record the location of such tanks, you may find yourself with nothing to show for your efforts.
Search For A Sign
Septic tanks are placed in such a way that they are as unnoticeable as possible on the land. After the grass has grown back after installation and some time has passed, it is possible that just a few visual indications will remain. Pay particular attention to the contours of your yard for any inexplicable high or low points that might suggest the presence of an underground storage tank.
Follow The Pipe
Installation of the septic tank takes place along the sewage line that runs from the house into the front yard. Locate the 4-inch sewage pipe at the point where it exits the home in the basement or crawl space, if it is there. Locate the same spot outside and make a note of it. Insert a thin metal probe into the earth, identify the 4-inch sewage line, and follow it across the yard, probing every 2 feet, until you reach the end of the property. Septic tanks are required to be at least 5 feet apart from the home in all states except Alaska.
Whenever the probe makes contact with flat concrete, fiberglass, or polyethylene it indicates that the tank has been located.
Locate The Lid
The majority of septic tanks are rectangular in shape and measure around 5 feet by 8 feet. Investigate the tank’s circumference to determine its boundaries and outline the rectangle’s boundary using a pencil. A septic tank that was built before 1975 will have a single concrete lid that is 24 inches in diameter in the center of the rectangle. If the tank was built after 1975, it will have two covers made of fiberglass or polyethylene, centered at the ends of the rectangle and centered at the ends of the rectangle.
It should be possible to uncover the lid or lids by digging with a spade in specific spots, depending on when year the tank was constructed.
Call A Professional
Opening a septic tank is a job best left to the pros once the lid has been discovered. Concrete septic tank lids are extremely heavy, and many require the use of lifting tools to remove them completely. An open tank has the potential to release toxic gases. Anyone going around on the property who comes into contact with an exposed septic tank might be in risk. Because of the noxious vapors present in an open tank, falling into one can be lethal.
Mark The Spot
Make a note on the ground near where the tank was pumped by a professional and the lid was buried to serve as a reference in the future. In order to keep track of where you are, you should choose a hefty circular patio tile that is embedded in the ground. Additionally, draw your own map of the area and store it with your other important papers.
How Your Septic System Works
Underground wastewater treatment facilities, known as septic systems, are often employed in rural regions where there are no centralized sewage lines. They clean wastewater from residential plumbing, such as that produced by bathrooms, kitchen drains, and laundry, by combining natural processes with well-established technology. A conventional septic system is comprised of two components: a septic tank and a drainfield, often known as a soil absorption field. It is the septic tank’s job to decompose organic matter and to remove floatable stuff (such as oils and grease) and solids from wastewater.
Alternate treatment systems rely on pumps or gravity to assist septic tank effluent in trickling through a variety of media such as sand, organic matter (e.g., peat and sawdust), constructed wetlands, or other media to remove or neutralize pollutants such as pathogens that cause disease, nitrogen, phosphorus, and other contaminants.
Specifically, this is how a typical conventional septic system works:
- All of the water that leaves your home drains down a single main drainage pipe and into a septic tank. An underground, water-tight container, often composed of concrete, fiberglass, or polyethylene, serves as a septic system’s holding tank. Its function is to retain wastewater for a long enough period of time to allow particles to sink to the bottom and form sludge, while oil and grease float to the surface and produce scum. Sludge and scum are prevented from exiting the tank and moving into the drainfield region by compartments and a T-shaped outlet. After that, the liquid wastewater (effluent) exits the tank and flows into the drainfield. The drainfield is a shallow, covered hole dug in unsaturated soil that serves as a drainage system. Porous surfaces are used to release pretreated wastewater because they allow the wastewater to pass through the soil and into the groundwater. In the process of percolating through the soil, wastewater is accepted, treated, and dispersed by the soil, finally discharging into groundwater. Finally, if the drainfield becomes overburdened with too much liquid, it can flood, causing sewage to flow to the ground surface or resulting in toilet backups and sink backups. Finally, wastewater percolates into the soil, where it is naturally removed of harmful coliform bacteria, viruses, and nutrients. Coliform bacteria are a kind of bacteria that may be found in the intestines of humans and other warm-blooded animals, with humans being the most common host. As a result of human fecal contamination, it is a sign of this.
The Guadalupe-Blanco River Authority has built an animated, interactive model of how a residential septic system works, which you can view here.
Do you have a septic system?
It’s possible that you’re already aware that you have a septic system. If you are not sure, here are some tell-tale symptoms that you most likely are:
- You make use of well water. In your home, the water pipe that brings water into the house does not have a meter. In the case of a water bill or a property tax bill, you will see “$0.00 Sewer Amount Charged.” It is possible that your neighbors have a septic system
How to find your septic system
You can locate your septic system once you have confirmed that you have one by following these steps:
- Taking a look at the “as constructed” drawing of your house
- Making a visual inspection of your yard for lids and manhole covers
- Getting in touch with a septic system service provider for assistance in locating it
Failure symptoms: Mind the signs!
A bad odor is not necessarily the first indicator of a septic system that is failing to work properly. Any of the following signs should prompt you to seek expert assistance:
- Water backing up into the drains of homes and businesses
- It is especially noticeable in dry weather that the drainfield grass is bright green and spongy. The presence of standing water or muddy soil near your septic system or in your basement
- A strong stench emanating from the area surrounding the septic tank and drainfield
How deep are septic tank lines buried?
Depth. According to the Clemson Cooperative Extension, the pipes should be placed in the leach field at a depth of at least 6 inches and most likely between 18 and 36 inches deep.
Because soil and water tables differ from state to state and even within states, each leach field must be designed specifically for that location. 4 feet and 8 inches In addition, how deep is a 1000-gallon septic tank buried?
| Steel Septic Tank Typical Dimensions | ||
|---|---|---|
| Steel Septic Tank Size (Gallons Capacity) | Tank Length (Inches) | Tank Depth (Height) (Inches) |
| 750 | 58 | 73 |
| 1000 | 58 | 96 |
| 1250 | 58 | 120 |
Is it possible for a septic tank to be too deep in this case? The depth of the septic tank should not be more than is necessary, because effluent is normally transported from the septic tank to the drainfield by gravity as well as by pumping or suction. Plumbers often build sewage lines to slope down from the inlet to the outlet at a rate of 1/8″ per foot to 1/4″ per foot of linear run of the waste pipe, depending on the kind of waste pipe. Should the lids of septic tanks be buried? A typical septic tank will have all of its components including the lid buried between four inches and four feet underground in the vast majority of situations.
How Far Should You Put the Septic Tank From the House?
Image courtesy of Kwangmoozaa/iStock/Getty Images.
In This Article
- Amount of distance from the home
- Basic safety concerns
- Suggestions for a successful installation
For those who don’t have access to a municipal sewage system, an alternate solution, such as a septic tank and field lines, will be required. The design and operation of these systems are fairly straightforward. When designing a septic system, you must keep in mind the requirements of local construction codes as well as public health concerns.
Tip
Depending on where you live, local ordinances and regulations that specify the distance between the septic tank and the home vary. However, the normal minimum distance is 10 feet between the two structures. Consult your local ordinances and regulations for a detailed answer as to how far your septic tank must be installed from your home. Requirements differ from one location to the next, although the standard minimum distance from the home is 10 feet in most cases. In the case of a private well for drinking water, however, keep in mind that many state departments of health demand a minimum distance of 50 feet between a new septic tank and a well.
It is possible that the septic tank will be placed considerably closer to the structure since it will be easier and require less plumbing in some cases.
Basic Safety Considerations
If you’re the type of person who prefers to do things on their own, there are certain important measures you should take before starting this endeavor. Before you start digging the hole for the tank, call your local utility providers to find out where the service lines are located. A gas line, water line, phone line, or electrical connection that has been severed is not only potentially dangerous, but it may also be extremely expensive to repair. Once you have finished excavating the hole, proceed with caution.
It’s also important to understand that a concrete septic tank can weigh up to 5 tons. Never attempt to place a concrete unit into the hole on your own. Make sure the hole is available when the tank is delivered so that it can be installed straight in the desired location.
Tips for a Successful Installation
Plan ahead of time to get your water supply switched on prior to installing your septic tank. You must fill the tank with water as soon as it is placed in its final position for this to be possible. This has absolutely nothing to do with the septic system itself, but it is a prudent precaution. In the event of a heavy downpour, the groundwater may swell and a septic tank may float out of the ground, even if it has been buried. If this occurs, contact a qualified professional immediately. Repairing any damage done to the lines or to the tank itself, as well as putting the tank back in its original location, may be a costly and time-consuming endeavor.
Initially, you may be confident that you will remember the exact location of the marker when it is time to top up the tank — which is generally every three to five years — but your memory may fade over time.
Maine Septic Services
The following are some of the most frequently asked questions about septic tanks. If you don’t find your question answered on this page, please contact us and we’ll be happy to assist you further.
Q. How often should I have my septic tank serviced?
It is recommended that you replace your A/C system once every two to five years, depending on how often you use it and how many people are utilizing the system.
Q. Do you have to drive on my lawn to service my septic tank?
A. No, it is not our policy. We carry roughly two hundred feet of hose, which is generally more than enough for most residential applications. We may bring additional hose if necessary if we are given advance notice.
Q. Is it O.K. to use drain cleaners with a septic system?
A. Avoid using drain cleaners and other chemicals whenever possible. They have the potential to disrupt the naturally existing biological processes in the septic tank and leaching region of the property. One gallon of some hazardous compounds can damage twenty-two million gallons of ground water, according to the Environmental Protection Agency.
Q. Do I need to use additives in my septic system?
In order to maintain a healthy pH balance in your system and to encourage better sewage digestion, we recommend that you flush one cup of baking soda down the toilet once a week.
Q. What do you do with my septage once it is removed from my tank?
It is transported to a Maine DEP-licensed disposal facility, such as a Wastewater Treatment Facility, where it is disposed.
Q. How do I find my septic tank?
A. Here are a few options for you to consider. Septic tanks are typically rectangular in design, measuring around 4 by 8 feet.
- You’ve probably come across a rectangular stretch of ground where the snow melts first in the winter and the grass burns first in the summer. An underground septic tank can be submerged to any depth between flush with the surface of the earth and more than 6 feet. When you look down in your basement, you can see where the sewer pipe exits through a hole in the wall. Take note of how far the pipe extends below the top of the foundation and whether or not it exits through the wall directly. When looking from the outside of the house, this will provide you with an approximate orientation for the pipe leading to the tank. To determine how far the tank is below grade, measure down from the top of the foundation wall to the ground’s surface and subtract that measurement from the inside measurement (also subtract another 6 because the top of the sewer pipe is usually 6 down on either side or end of the tank) to get a rough estimate of how far the tank is below grade. You can probe for the tank top using a steel bar or rod that you push into the earth. Keep in mind that you are searching for a flat rectangular space around 4 x 8 inches below the surface of the earth
- Many septic systems are not gravity systems and require pumping to function properly. Excavation around your septic tank and/or pump tank should always be done with extreme caution since electrical lines can be hidden underground and are not usually marked, posing a possible electrical danger. Never fear if you can’t identify your septic tank
- We have specialized equipment that can help us locate the tank if necessary
- Just give us a call.
Q. Can my septic tank baffles be repaired?
A. Yes, we replace a large number of deteriorating concrete baffles with PVC baffles each year.
Q. Are septic tank filters any good, don�t they plug up frequently?
An absolutely necessary addition to your septic tank is the installation of a Zabel filter by our team. These filters help to keep particles down to one-sixteenth of an inch in the septic tank by trapping about 80% more solids. Over the years, we’ve discovered that the Zabel filters appear to be the most effective. It is just necessary to remove the clogged filter, wash it well and replace it when the problem arises.
In most cases, filter maintenance is performed at the same time as septic tank maintenance. The most significant benefit of the filter is that it contributes to extending the life expectancy of the leach field, which is typically 20 to 25 years.
Q. I hate digging up my septic tank and having the mess in my lawn every three years or so.What can we do to save all that mess?
The installation of a riser above the service cover is recommended. It is recommended that each of the access covers for the filter and pump be equipped with a riser as well. Risers are now required under the State of Maine’s Subsurface Rules. We choose to use Fralo risers because they may be erected in sloping grass areas and because they are simple to install flush with the ground surface.
Q. Do you have any other tips you can give me?
A. Without a doubt! View the State of Maine’s Ten Tips for Maintaining Your Septic System for more information.
