How Does A Septic Tank Get Pumped Out? (Solution found)

Generally, commercial septic pumping involves a pump truck removing the sludge, effluent and scum in the tank and leaving the tank empty and ready to be filled again. Once the waste is removed, there are only so many things that can be done with it.

• The operator uses the muck raking tool to break up both the floating scum layer and settled sludge layer in the septic tank. A few minutes are spent with this tool before pumping begins. During pumping the operator continues to use this tool to break up and pump out the floating scum layer in the septic tank.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

• Your Drains Are Taking Forever.
• Standing Water Over Your Septic Tank.
• Bad Smells Coming From Your Yard.
• You Hear Gurgling Water.
• You Have A Sewage Backup.
• How often should you empty your septic tank?

How often should a septic tank need to be pumped?

Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.

When a septic tank is pumped Where does the waste go?

Maintenance of your septic tank is quick and simple and you can even do it yourself. Septic tanks carry sewage to a septic tank where good bacteria breaks down and filters waste, and it is sent to a sewage field. These reinforced square containers are found under the property grounds.

How long does it take to pump out a septic tank?

How long does it take to pump a septic tank? A septic tank between 1,000 – 1,250 gallons in size generally takes around 20-30 minutes to empty. A larger tank (1,500 – 2,000 gallons) will take about twice as long, between 45-60 minutes.

When a septic tank is pumped Is it empty?

When should a septic tank be emptied? As a general rule, you should ideally empty out your septic tank once every three to five years.

How much does it cost to pump a septic tank?

How much does it cost to pump out a septic tank? The average cost is $300, but can run up to $500, depending on your location. The tank should be pumped out every three to five years.

Can I shower if my septic tank is full?

Only the water would get out into the leach field in a proper system unless you run too much water too fast. The thing to do is to run your shower water outside into it’s own drain area, but it may not be allowed where you are. Used to be called gray water system.

How do you know if your septic system is failing?

The first signs of a failing septic system may include slow draining toilets and sinks, gurgling noises within the plumbing, sewage odors inside, continuing drainage backups, or bacteria in the well water. The area of the strongest odor will point to the location of the failure in the septic system.

How do I clean my septic tank naturally?

You can mix about a 1/4 cup of baking soda with 1/2 cup of vinegar and 2 tablespoons lemon to make your own natural cleaning agent. The baking soda will fizz up to help get the dirt and grime in your tub and drains. It’s a great cleaner and your septic system will thank you!

How full should my septic tank be?

A septic tank should always be “filled” to its normal liquid level, or the bottom of the outlet pipe which carries effluent to the absorption area. This normal liquid level is usually between 8” to 12” from the top of the tank on average (see picture at right).

Can you flush toilet while septic tank is being pumped?

Everyday maintenance: After a septic system pumping, you can take simple steps to ensure the system keeps working as intended. The first step is to only flush wastewater and toilet paper. Don’t flush other items like feminine hygiene products, diapers or paper towels, as they may result in clogs.

What happens after septic tank is pumped?

Even after one week of septic pumping service, your septic tank should return to a “proper working level” about 1 foot from the top of the tank. Your septic tank will hold liquid in order for the separation of solids and liquid to happen. Only the liquid (or grey water) should flow out to the leach field pipes.

Septic Tank Pumping Procedure – Pumping out the Septic Tank

• Fill out the form below to ask a question or to make a comment on the stages and procedures involved in pumping out and cleaning a septic tank

InspectAPedia does not allow any form of conflict of interest. The sponsors, goods, and services described on this website are not affiliated with us in any way. Details on how to pump out or clean a septic tank may be found here. In this septic tank pumpout article series, you’ll learn how to locate, open, pump out, clean, and inspect conventional septic tanks, as well as how to locate, open, pump out, clean, and inspect conventional septic tanks using photos. In addition to septic pumping tank truck operators, this guideline is meant to provide basic information to homeowners and septic service providers that are concerned about septic system maintenance.

For this topic, we also have anARTICLE INDEX available, or you may check the top or bottom of the page.

Pumping Out the Septic Tank – how the solidswaste are removed from a septic tank

InspectAPedia does not allow any form of conflict of interest. The sponsors, goods, and services described on this website are not affiliated with us in any way. Details on how to pump out or clean a septic tank may be found here. In this septic tank pumpout article series, you’ll learn how to locate, open, pump out, clean, and inspect conventional septic tanks, as well as how to locate, open, pump out, clean, and inspect conventional septic tanks using photos. In addition to septic pumping tank truck operators, this guideline is meant to provide basic information to homeowners and septic service providers that are concerned about septic system maintenance.

For this topic, we also have anARTICLE INDEX available, or you may check the top or bottom of the page.

Reader CommentsQ A

Last month, our septic system overflowed into two bathrooms, which was a nightmare. According to the report, the circuit breaker had tripped and the sump pump was not operating properly. Because it had been 5 years since the tank had been filled, I phoned a local pumper to empty it. Surprisingly, they just opened the overflow tank and pumped the contents of it. That is something I have never seen before. We’ve always had the septic tank itself opened and pumped, which is a good thing. When I questioned the pumper, they said that pumping the auxiliary/overflow tank was standard procedure.

1. Is it possible that we were duped?
2. When the tank’s inlet and exit baffle conditions are checked, the task is done better, and providing a second access point may make cleaning sludge and crud at that end easier to reach.
3. In the intake end of the tank, I’ve drilled a hole and exposed one at a depth of around 13 inches.
4. Thank you in advance for any advise you may provide!
5. It is dependent on the pumping machinery used by the individual pumper truck, as well as the horizontal and vertical lift lengths involved.
6. During this section, we will discuss the limitations of septic tank pumper trucks in terms of both horizontal distance and vertical lift.

There you’ll discover particular examples that will help you solve the question. In order to pump out the septic tank, how near does the truck need to get to the tank?

Question: pumper said can’t pump septic tank because of hair

A photo shows evidence that some buildings may really be exposed to significant amounts of hair: thick clumps of dog hair were dragged into this water heater draft hood, causing the heater to become dangerous and putting the occupants at risk of carbon monoxide poisoning On May 24, 2020, a hair in a septic tank stated: I had a septic tank pumping business come out to my house. This is something I do every three years (1000 gallon tank). The operator informed me that he would be unable to pump it because I had an excessive amount of hair in the machine.

He stated that he would consult with his supervisor, but that he would consider a chemical therapy and retrying in three months.

I’m happy I did, because some of these therapies may be really hazardous to your health.

Any suggestions would be much appreciated.

Moderator reply: Problems Caused by Hair in the Septic Tank?

Finding so much hair in a septic tank that it can’t be pumped is unusual and necessitates further investigation.Confirmation that the hair is indeed hair, as well as an explanation, are required.You may require the services of a septic pumping contractor who has a good grinder pump.But first, we must determine whether or not there is a blocking material in your septic tank and, if there is, how it got there and what it is.Do not rely Not even to consider the possibility that roots have gotten into your septic tank should be taken into consideration.

As you’ll see in this photo of a root-clogged sewage system in Greece, roots might appear to be hair-like in appearance.

Details: hair may clog traps and drains, but a clogged septic tanks such that it can’t be pumped would be unusual.

I was taken aback by your remark that there is so much hair in your septic tank that it is impossible to clean the tank properly. It is not possible for hair to disintegrate in the drain system or in the septic tank, whether it comes from people or pets. Although the regular amounts of hair entering the building drain/waste pipe system from routine family washing and bathing do not generally cause problems in the septic tank, they can cause clogging at the drain or trap of a sink, shower, or bathtub.

Large amounts of hair can potentially clog a septic pump or a lift pump, depending on their design.

Having that much hair in a sewage tank that it prevents the tank from being pumped by the septic pumping truck would be an unusual and difficult thing to explain to others.

A hair will normally float and adhere to the floating scum and grease layer in the septic tank, but hair may also settle to the tank bottom and become part of the settled organic matter in the tank on rare occasions.

Septic pumper trucks can usually handle hair as well as floating scum and settled sludge

In most cases, the hose on a septic tank pumper truck is three inches in diameter, and the pumps on septic tank pumper trucks are powerful enough to suck up tiny boulders as well as remove the floating scum layer and settled sludge layer from a septic tank. In reality, while researching and producing the septic pump vacuum pump article I referenced above, we discovered that the word “hair” did not appear in any of the septic pumper truck pump specs or descriptions. See the website for further information.

1. In most cases, the pumper can pump through even the thickest hardened floating scum layer or settled sludge layer that has accumulated.
2. On rare occasions, a pumper may actually add water to the septic tank in order to aid in the breakdown of solids prior to pumping.
3. That advice, in my opinion, may imply that the person who is proposing it has a limited grasp of how septic systems operate and must be corrected.
4. As soon as someone runs ANY plumbing fixture in the building, the chemical, which has already been diluted by the liquid volume of the septic tank, is pushed out into the drainfield.
5. 2.
6. Insist on having your septic tank inspected by a qualified septic tank cleaning specialist and report back to us with the results.
7. Continue reading atINSPECT the SEPTIC TANK DURING PUMPING, or choose a topic from the closely-related topics listed below, or see the completeARTICLE INDEX for a comprehensive list of articles.

Septic Tank Pumping Articles

• PUMPER TRUCK VACUUM PUMPS
• HOW TO FIND A SEPTIC TANK
• SEPTIC TANK LEVELS OF SEWAGE
• SEPTIC TANK PUMPING MISTAKES

• ERRORS IN THE TIMING OF THE SEPTIC TANK’S PUMPOUT
• SEPTIC SYSTEM BACK-PUMPING-consumer warning
• SEPTIC TANK OBJECTIVE INFORMATION
• SEPTIC TANK PUMPOUT TIMING ERRORS
• WHEN SHOULD A SEPTIC TANK BE CLEANED
• WHEN SHOULD A SEPTIC TANK NOT BE PUMPED

• SEPTIC TANK INSPECTION PROCEDURE
• SEPTIC TANK LEVELS OF SEWAGE
• PUMPER TRUCK OPERATION PROCEDURE
• PUMPING THE SEPTIC TANK
• CLEANING SEPTIC TANKS
• WHEN TO CLEAN THE SEPTIC TANK
• WHEN NOT TO PUMP A SEPTIC TANK
• FINDING THE SEPTIC TANK, HOW TO
• HOW TO OPEN A SEPTIC

• BEFORE PUMPING, INSPECT THE SEPTIC TANK
• AFTER PUMPING, INSPECT THE SEPTIC TANK
• CLOSE THE SEPTIC TANK
• INSPECT THE SEPTIC TANK

• NOTE THE LOCATION OF THE SEPTIC TANK AND THE CONCLUSIONS OF THE SEPTIC PUMPING.

• Reasons for Septic Tank Pumping
• Septic Tank Pumping Schedule
• Septic Tank Safety
• Septic Tank Chemicals
• Septic Tank Pumping Reasons

Suggested citation for this web page

PUMPING THE SEPTIC TANKatInspect A pedia.com is an online encyclopedia of building and environmental inspection, testing, diagnosis, repair, and issue avoidance guidance for the construction industry.

INDEX to RELATED ARTICLES:ARTICLE INDEX to SEPTIC SYSTEMS

Alternatives include asking a question or searching InspectApedia using the SEARCH BOXfound below.

Ask a Question or Search InspectApedia

If you have any questions, answers, or comments concerning the methods and procedures involved in pumping out and cleaning a septic tank, please post them here. We encourage you to use the search box just below, or if you prefer, you may make a question or remark in theCommentsbox below and we will get back to you as soon as possible. InspectApedia is a website that allows you to search for things.

Please keep in mind that the publication of your remark below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link. Your submission will appear when it has been reviewed by a moderator. We sincerely apologize for the inconvenience.

Technical ReviewersReferences

Citations can be shown or hidden by selecting Show or Hide Citations. InspectApedia.com is a publisher that provides references. Daniel Friedman is an American journalist and author.

How to Care for Your Septic Tank

Septic systems are built in around one-fourth of all residences in the United States, and they are particularly common in rural regions that are not served by municipal sewer systems. In contrast to conventional sewage systems, which pump solid and liquid waste from the home into sewer mains and then to a centralized sewage treatment plant, septic systems pump waste from the house out into a drain field and an underground septic tank.

How Septic System Works

The water and wastes carried by the water in a standard septic system go down the home’s drain system and through a single main sewer pipe to the septic tank, where they are treated. It is possible for wastewater to flow only by gravity or with the aid of an electric pump. However, this is not always the case. The septic tank is designed to store waste material for an extended period of time, allowing solids to sink to the bottom while oil, grease, and liquids – later known as scum — float to the top.

As bacterial activity breaks down the pathogens, the liquids slowly trickle down through the soil and into the groundwater.

Between times, the solids in the tank degrade under the influence of anaerobic bacteria and form an oily substance that settles at the bottom of the tank.

If the bacterial action is efficient, the volume of these solid wastes is significantly decreased as they decompose.

Anatomy of a Septic Tank

The septic tank is a water-tight container constructed of concrete, fiberglass, or polyethylene that is placed in the ground in a location close to the house to collect waste. It is comprised of an entrance pipe through which all waste from the home’s sewage line is directed into the tank and an output pipe through which liquids are directed to the drain field. Unless you look closely, the top of the tank is buried just below the level of the earth and is completely inaccessible except for one or two inspection tubes and a manhole cover, which is used to pump sludge from the tank when it becomes required.

When to Have Your Septic Tank Pumped

An inspection of a septic tank should be performed every two to three years, with mechanical pumping necessary every three to five years to empty the tank, according to the Environmental Protection Agency (EPA). Pumping may be required on a yearly basis for systems that are inadequate or that receive a lot of demand. System components such as electrical float switches, pumps, and mechanical components must be examined more frequently, generally once a year, in certain cases. When you pump your septic tank, you’re getting rid of sludge from the bottom of the tank, and you need to do it as soon as possible since sludge can build up to the point where it stops the outflow pipe, which allows liquids to flow into the drain field.

The frequency with which this must be done is determined by a number of factors, including:

• Typical for larger houses, waste generation increases, causing the septic tank to fill up more quickly
• Size of the household The amount of wastewater produced is as follows: If there is an excessive amount of wastewater going into the septic tank, it might have an impact on how quickly the tank fills. The amount of particles included in the wastewater is as follows: Households with a large number of toilets or who often use garbage disposals have a tendency to fill their septic tanks more quickly. Septic tank capacity: Larger tanks can retain more solid sludge and, as a result, will need to be pumped less frequently.

There are a few methods that might assist you in estimating when you should have your tank pumped. For example, a typical four-bedroom house may have a 1,200 to 1,500 gallon tank, and if you have a family of four, you may expect to have the tank pumped every 3 to 5 years under normal circumstances.

How a Septic Tank Is Pumped

The expert who inspects and services your septic tank will notify you when it is necessary to pump out the sludge from the tank, if you have a septic service professional who does so on a regular basis. This occurs when the floating scum layer that exists between the sludge and the floating water is within approximately 6 inches of the outflow pipe leading to the drain field. Septic service specialists arrive in a huge tanker truck with vacuum equipment, and when the lid has been removed from the septic tank, they introduce a large hose into the tank through the manhole they have created.

This helps to break up the particles and mix them with the liquid material, which helps the pumping process run more efficiently.

Tips for Maintaining Septic System

There are various proactive actions you can take to ensure that your septic system runs properly and that the frequency with which it must be pumped is reduced. These include the following:

• Reduce your water use. Utilizing toilets and faucets with high water efficiency and water conservation may significantly reduce the quantity of water that enters the septic system and causes it to backup. Water leaks and drips should be repaired as soon as possible in order to avoid misuse of water, which can lead to the septic tank filling up faster. Reduce the amount of solid trash produced: Another technique to ensure that the septic system is operating correctly is to keep track of the solid waste that enters it. Trash that is either washed down the drain or flushed down the toilet can cause the septic system to become overburdened. Other than toilet paper, don’t flush anything down the toilet. Also, avoid utilizing a trash disposer that dumps organic food wastes into the septic system, which might cause problems. Even though it takes just a small amount of work, throwing things in the trash makes a significant impact in how well the septic system is managed. Rainwater should be directed away from the drain field. Rain gutters and landscaping grading that direct water into the septic system’s drain field can impair the field’s capacity to distribute water from the septic system.
• Hot tubs should not be drained into the sewer system. Water from hot tubs or swimming pools should be discharged onto the yard rather than into the drain field, since this might impose an unnecessary strain on a septic system. It is best not to flush chemicals down the toilet. Avoid flushing chemicals down the toilet because they can interfere with the bacterial process that breaks down solid wastes. There are also several other commercial septic tank additives, which are often more harmful than beneficial. Use of septic tank chemicals is not recommended unless it has been prescribed by a trustworthy specialist.

How to Care for Your Septic System

Septic system maintenance is neither difficult or expensive, and it does not have to be done frequently. The maintenance of a vehicle is comprised of four major components:

• Inspect and pump your drainfield on a regular basis
• Conserve water
• Dispose of waste properly
• And keep your drainfield in good condition.

Inspect and Pump Frequently

Inspection of the ordinary residential septic system should be performed by a septic service specialist at least once every three years. Household septic tanks are normally pumped every three to five years, depending on how often they are used. Alternative systems that use electrical float switches, pumps, or mechanical components should be examined more frequently, typically once a year, to ensure that they are in proper working order. Because alternative systems contain mechanical components, it is essential to have a service contract.

• The size of the household
• The total amount of wastewater produced
• The amount of solids present in wastewater
• The size of the septic tank

Service provider coming? Here is what you need to know.

When you contact a septic service provider, he or she will inspect your septic tank for leaks as well as the scum and sludge layers that have built up over time. Maintain detailed records of any maintenance work conducted on your septic system. Because of the T-shaped outlet on the side of your tank, sludge and scum will not be able to escape from the tank and travel to the drainfield region. A pumping is required when the bottom of the scum layer or the top of the sludge layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the bottom of the outlet.

In the service report for your system, the service provider should mention the completion of repairs as well as the condition of the tank.

If additional repairs are recommended, contact a repair professional as soon as possible. An online septic finder from the National Onsite Wastewater Recycling Association (NOWRA) makes it simple to identify service specialists in your region.

Use Water Efficiently

In a normal single-family house, the average indoor water consumption is about 70 gallons per person, per day, on average. A single leaking or running toilet can waste as much as 200 gallons of water each day, depending on the situation. The septic system is responsible for disposing of all of the water that a residence sends down its pipes. The more water that is conserved in a household, the less water that enters the sewage system. A septic system that is operated efficiently will operate more efficiently and will have a lower chance of failure.

• Toilets with a high level of efficiency. The usage of toilets accounts for 25 to 30% of total home water use. Many older homes have toilets with reservoirs that hold 3.5 to 5 gallons of water, but contemporary, high-efficiency toilets consume 1.6 gallons or less of water for each flush. Changing out your old toilets for high-efficiency versions is a simple approach to lessen the amount of household water that gets into your septic system. Aerators for faucets and high-efficiency showerheads are also available. Reduce water use and the volume of water entering your septic system by using faucet aerators, high-efficiency showerheads, and shower flow restriction devices. Machines for washing clothes. Water and energy are wasted when little loads of laundry are washed on the large-load cycle of your washing machine. By selecting the appropriate load size, you may limit the amount of water wasted. If you are unable to specify a load size, only complete loads of washing should be performed. Washing machine use should be spread throughout the week if at all possible. Doing all of your household laundry in one day may appear to be a time-saving strategy
• Nevertheless, it can cause damage to your septic system by denying your septic tank adequate time to handle waste and may even cause your drainfield to overflow. Machines that have earned theENERGY STARlabel consume 35 percent less energy and 50 percent less water than ordinary ones, according to the Environmental Protection Agency. Other Energy Star appliances can save you a lot of money on your energy and water bills.

Properly Dispose of Waste

Everything that goes down your drains, whether it’s flushed down the toilet, ground up in the trash disposal, or poured down the sink, shower, or bath, ends up in your septic system, which is where it belongs. What you flush down the toilet has an impact on how effectively your septic system functions.

Toilets aren’t trash cans!

Your septic system is not a garbage disposal system. A simple rule of thumb is to never flush anything other than human waste and toilet paper down the toilet. Never flush a toilet:

• Grease or oil used in the kitchen
• Wipes that are not flushable, such as baby wipes or other wet wipes
• Optical solutions
• Photographic solutions Products for feminine hygiene
• Condoms
• Floss for the teeth
• Diapers
• Butts of cigarette smoke
• Grinds from a cup of coffee Litter for cats
• Towels made of paper
• Pharmaceuticals
• Chemicals commonly found in the home, such as gasoline, oil, insecticides, antifreeze, and paint or paint thinners

Toilet Paper Needs to Be Flushed! Check out this video, which demonstrates why the only item you should flush down your toilet are toilet paper rolls.

Think at the sink!

Your septic system is made up of a collection of living organisms that digest and treat the waste generated by your household. Pouring pollutants down your drain can kill these organisms and cause damage to your septic system as well as other things. Whether you’re at the kitchen sink, the bathtub, or the utility sink, remember the following:

• If you have a clogged drain, avoid using chemical drain openers. To prevent this from happening, use hot water or a drain snake
• Never dump cooking oil or grease down the sink or toilet. It is never a good idea to flush oil-based paints, solvents, or huge quantities of harmful cleansers down the toilet. Even latex paint waste should be kept to a bare minimum. Disposal of rubbish should be avoided or limited to a minimum. Fats, grease, and particles will be considerably reduced in your septic tank, reducing the likelihood of your drainfield being clogged.

Own a recreational vehicle (RV), boat or mobile home?

If you have ever spent any time in an RV or boat, you are undoubtedly familiar with the issue of aromas emanating from sewage holding tanks.

• The National Small Flows Clearinghouse’s Septic System Care hotline, which may be reached toll-free at 800-624-8301, has a factsheet on safe wastewater disposal for RV, boat, and mobile home owners and operators.

Maintain Your Drainfield

It is critical that you maintain the integrity of your drainfield, which is a component of your septic system that filters impurities from the liquid that emerges from your septic tank once it has been installed. Here are some things you should do to keep it in good condition:

• Parking: Do not park or drive on your drainfield at any time. Plan your tree plantings so that their roots do not grow into your drainfield or septic system. An experienced septic service provider can recommend the appropriate distance for your septic tank and surrounding landscaping, based on your specific situation. Locating Your Drainfield: Keep any roof drains, sump pumps, and other rainfall drainage systems away from the drainfield area. Excess water causes the wastewater treatment process to slow down or halt completely.

How Often Are Septic Tanks Emptied, and Where Do the Contents Go?

It’s safe to assume that wherever there are many individuals who run their houses’ waste systems through septic tanks, there will be a slew of local firms that specialize in eliminating the scum and sludge that collect in the tank over a long period of time. This is a crucial service because, if too much sludge accumulates over time, it can cause overflow, which is harmful to everyone involved. Septic pumping for commercial purposes typically consists of a pump truck emptying the sludge, effluent, and scum from the tank and leaving the tank empty and ready to be refilled with fresh sludge and water.

1. Prior to the passage of federal legislation prohibiting the disposal of sewage sludge, waste management businesses could simply bury it in landfills.
2. These locations still exist, however many of them are in the process of being cleaned up (clean-up).
3. In certain situations, the septic contents are transported to waste treatment plants where they are combined with the stew that has been pumped in from a municipal sewer system, or they are supplied to for-profit organizations that specialize in the treatment of septage.
4. Septage may also be placed at landfills that have been allowed.
5. Because of the difficulties associated with properly disposing of your septic tank’s contents, septage is sometimes employed in a different way: to grow food.
6. This application of septage has the potential to be contentious.
7. It is expected that, when properly applied to farmland with good soil and a low water table, the soil will work as a filter in the same way as a drain field in the rear of a home with a septic tank will act as a filter.
8. Historically, it has been recognized that methane, which is created as a waste product during the breakdown of sewage, may be utilized to generate energy.
9. In addition, because the power produced does not burn, there is little or no pollutants emitted.
10. One system, constructed south of Seattle, Washington, in 2004, has the capacity to generate enough electricity to power 1,000 houses.

Who would have thought that your feces could be so beneficial? More information about waste treatment may be found on the next page. The original publication date was July 29, 2008.

How Does a Septic Tank Work?

Mr. Fix-It-Up-For-The-Family You may save a lot of money if you understand how a sewage treatment system works—and what can go wrong—so that you can handle your own septic system maintenance.

How does a septic tank work?

Pumping the tank on a regular basis eliminates sludge and scum, which helps to keep a septic system in good working order. It is possible for a well-designed and well built septic system to last for decades, or it might collapse in a matter of years. It is entirely up to you as long as you can answer the question of how do septic tanks function. Healthy septic systems are very inexpensive to maintain, but digging up and replacing a septic system that has completely collapsed may easily cost tens of thousands in labor and material costs.

It’s critical to understand how a septic tank works in order to maintain one.

Let’s take a look below ground and observe what happens in a properly operating septic system, shall we?

Understand that a septic system is a cafeteria for bacteria

Bacteria are responsible for the proper operation of a septic system. They decompose garbage, resulting in water that is clean enough to safely trickle down into the earth’s surface. The entire system is set up to keep bacteria healthy and busy at all times. Some of them reside in the tank, but the majority of them are found in the drain field. 1. The septic tank is the final destination for all waste. 2. The majority of the tank is filled with watery waste, referred to as “effluent.” Anaerobic bacteria begin to break down the organic matter in the effluent as soon as it enters the system.

1. A layer of sludge settles to the bottom of the container.
2. 4.
3. Scum is mostly constituted of fats, greases, and oils, among other substances.
4. Grease and oils float to the surface of the water.
5. (5) A filter stops the majority of particles from reaching the exit pipe.
6. The effluent is discharged into the drain field.
7. Effluent is allowed to leak into the surrounding gravel because of holes in the drain septic field pipe.
8. The garbage is completely decomposed by aerobic bacteria found in gravel and dirt.
9. Potable water seeps into the groundwater and aquifer system from the surface.

Septic Tank Clean Out: Don’t abuse the system

Septic systems that have been correctly planned and constructed require just occasional ‘pumping’ to remove the sludge and scum that has built up inside the tank.

However, if you don’t understand how a septic tank works, you may unintentionally hurt or even destroy the system.

• Drains are used to dispose of waste that decomposes slowly (or not at all). Cigarette butts, diapers, and coffee grounds are all known to cause issues. Garbage disposers, if utilized excessively, can introduce an excessive amount of solid waste into the system. Lint from synthetic fibers is emitted from washing machine lint traps. This substance is not degraded by bacteria in the tank and drain septic field. Bacteria are killed by chemicals found in the home, such as disinfecting cleansers and antibacterial soaps. The majority of systems are capable of withstanding limited usage of these goods, but the less you use them, the better. When a large amount of wastewater is produced in a short period of time, the tank is flushed away too quickly. Too much sludge inhibits bacteria’s capacity to break down waste. Sludge can also overflow into the drain field if there is too much of it. Sludge or scum obstructs the flow of water via a pipe. It is possible for tree and shrub roots to obstruct and cause harm to a drain field. Compacted soil and gravel prevent wastewater from seeping into the ground and deprive germs of oxygen. Most of the time, this is caused by vehicles driving or parking on the drain field.

Get your tank pumped…

Your tank must be emptied on a regular basis by a professional. Pumping eliminates the accumulation of sludge and scum that has accumulated in the tank, which has caused the bacterial action to be slowed. If you have a large tank, it may be necessary to pump it once a year; but, depending on the size of your tank and the quantity of waste you send through the system, you may go two or three years between pumpings. Inquire with your inspector about an approximate guideline for how frequently your tank should be pumped.

…but don’t hire a pumper until you need it

Inspections and pumping should be performed on a regular basis. However, if you’re not afraid of getting your hands dirty, you may verify the sludge level yourself with a gadget known as The Sludge Judge. It ranges in price from $100 to $125 and is commonly accessible on the internet. Once you’ve verified that your tank is one-third full with sludge, you should contact a professional to come out and pump it out completely.

Install an effluent filter in your septic system

Garbage from your home accumulates into three distinct strata. The septic filter is responsible for preventing blockage of the drain field pipes.

Septic tank filter close-up

The septic tank filter is responsible for capturing suspended particles that may otherwise block the drain field pipes. Obtain an effluent filter for your tank from your contractor and place it on the outflow pipe of your tank. (It will most likely cost between $50 and $100, plus labor.) This device, which helps to prevent sediments from entering the drain field, will need to be cleaned out on a regular basis by a contractor to maintain its effectiveness.

Solution for a clogged septic system

The septic tank filter is responsible for capturing suspended particles that may otherwise block the drainage field pipes. Inquire with your contractor about installing an effluent filter on the outflow line from your storage tank. In addition to labor, it will likely cost $50 to $100. In order to prevent sediments from entering the drain field, this device must be cleaned out by a contractor on an as-needed basis.

Get an inspection

Following a comprehensive first check performed by an expert, regular inspections will cost less than $100 each inspection for the next year. Your professional will be able to inform you how often you should get your system inspected as well as how a septic tank functions. As straightforward as a septic system appears, determining its overall condition necessitates the services of a professional. There are a plethora of contractors who would gladly pump the sludge out of your tank, but many, in my experience, are unable to explain how a septic system works or how it should be maintained.

A certification scheme for septic contractors has been established in certain states; check with your state’s Secretary of State’s office to see whether yours is one of them.

Also, a qualified inspector will be able to tell you whether or not your tank is large enough to accommodate your household’s needs, as well as the maximum amount of water that can be passed through it in a single day.

You may be able to boost the performance of your system by using a product such as RID-X to introduce bacteria into the system. As you learn more about how a septic tank works, your professional should be able to tell you whether or not your system will benefit from this treatment.

Alternatives to a new drain field

If an examination or a sewage backup indicate that your drain field is in need of replacement, the only option is to replace it completely. As a result, it’s important to talk with a contractor about other possibilities before proceeding with the project.

• Pipes should be cleaned. A rotating pressure washer, used by a contractor, may be used to clean out the drain septic field pipes. The cost of “jetting” the pipes is generally around $200. Chemicals should be used to clean the system. A commercial solution (not a home-made one) that enhances the quantity of oxygen in the drain field should be discussed with your contractor before installing your new system. Septic-Scrub is a product that I suggest. A normal treatment will cost between $500 and $1,000. Make the soil more pliable. The practice of “terra-lifting,” which involves pumping high-pressure air into several spots surrounding the drain field, is authorized in some regions. Some contractors use it to shatter compacted dirt around the pipes. Depending on the circumstances, this might cost less than $1,000 or as much as $4,000 or more.

Protect your drain septic field from lint

When this device is in place, it inhibits lint from entering the system, especially synthetic fibers that bacteria are unable to digest. One of these filters, which I’ve designed and termed theSeptic Protector, was invented by me. An additional filter is included in the price of around $150 plus delivery. Learn more about how to filter out laundry lint in this article.

Don’t overload the septic system

This device prevents lint from entering the system, particularly synthetic fibers, which bacteria are unable to digest and hence cause infection. Septic Protector is the name I gave to one of these filters that I designed myself. An additional filter is included in the price of roughly $150 plus delivery. See this article for further information on how to filter out lint from your clothes.

Meet the Expert

Septic systems, according to Jim vonMeier, are the solution to America’s water deficit because they supply cleaned water to depleted aquifers, according to vonMeier. He travels the country lobbying for septic systems, giving lectures, and giving testimony. For septic system inquiries, as well as information on the operation of the septic tank, contact him by email.

Septic Tank Pumping And What You Need To Know

The installation of septic systems is common in rural areas, where residents rely on them for sewage disposal. In Riverside County, CA, septic systems are built in around one out of every four residences. Sewage systems, on the other hand, pump solid and liquid waste from the house into pipes that run to an underground tank, rather than through sewer mains to a central sewage treatment facility.

How Does A Septic System Drain And Work

In a standard septic system, all wastewater and effluent created by the residence is transported away by drainage water to a septic tank, which is located underground. Regardless of whether sewage is discharged by gravity or with the assistance of an electric pump, it is almost always channeled through a pipe. The wastewater is contained in the septic tank, which separates into layers of solids at the bottom and layers of oils, grease, and liquid at the top. The sludge that accumulates on top of the water is channeled down a series of porous pipes to a drain field that has been prepared with gravel and other stones to aid in the dispersion of the liquid waste.

Meanwhile, the solids in the tank decompose under the influence of anaerobic bacteria, resulting in the formation of a sludgy material that settles at the bottom of the container.

How Does A Septic System Get Pumped?

When the septic tank pumping service arrives, it arrives in a huge truck with tanks and vacuum equipment, which specialists enter into the septic tank through an open maintenance hole after removing the tank lid. An extraction device placed on a truck is typically used to remove liquid from a septic tank before the tank can be completely emptied and cleaned.

Solids and fluids are siphoned out more effectively if the technician stirs up detritus in the tank (which is greatly decreased when the tank is properly sealed).

When to Have Your Septic Tank Pumped

The EPA (Environmental Protection Agency) advises that a septic tank be examined every two to three years, depending on the circumstances. Pumping of the tank is normally necessary every three to five years, with mechanical pumping becoming more often as the volume of wastewater grows. When you pump your septic tank, you are eliminating the sludge from the bottom of the tank, which must be done before it accumulates and plugs the exit line through which liquids flow. The frequency with which this must be done is determined by a number of factors, including:

• Larger families are more prone than smaller households to overfill their septic tanks since they create a greater volume of waste. The amount of wastewater generated is as follows: A septic tank’s ability to fill up rapidly is influenced by the amount of sewage it contains. The quantity of particles in the wastewater: Households with a large number of toilets might cause the septic tank to fill up more quickly. Smaller, more solid-capacity tanks will require less frequent pumping than larger tanks that can retain more liquid sludge.

Conclusion

If you are concerned about your septic system, there are numerous things to consider. If you want to understand how your septic tank works and what causes it to get backed up or blocked, you must first learn the fundamentals of how it operates. Understanding when you need call in specialists for assistance, such as Canyon Hills Plumbing, is also critical to your success. Prior to beginning any work on your property, we can assist you in assessing the situation and making advice on what has to be done to prepare the land.

Pumping (Cleaning Out a Septic Tank)

The majority of residential septic tanks need to be cleaned every three to five years. When solids fill between one-third and one-half of the tank, it is necessary to pump the tank. If this occurs, the only way to determine when it does is to have your tank inspected by an experienced septic contractor. When the following situations occur, the contractor will propose that a qualified septic pumper be hired:

• There is a 6 inch gap between the bottom of the scum (grease) layer and that of the bottom of the outlet tee
• And a 12 inch gap between the top of the sludge layer and the top of the outlet tee.

After the tank has been pumped, there is no need to “reseed” it with new material. Seeding is the process of promoting excellent bacterial growth by introducing substances such as yeast, dung, or dead animals. The Department of Health and Human Services does not propose seeding the system since the sheer act of utilizing the system will give all of the germs necessary to ensure that the system functions properly. Yeast, dung, meat, and dead animals will not aid in the development of the colony of bacteria in the tank any quicker than they already are.

General Advice on Septic Tank Pumping Frequency

• A single tenant has a pump that has to be replaced every 12 years
• Two people have a pump that needs to be replaced every 6 years
• Four inhabitants have a pump that needs to be replaced every 3 years. The number of inhabitants is six, and the pump is replaced every two years. The number of inhabitants is 8
• The pump is replaced once a year.

• A single tenant has a pump that has to be replaced every 12 years
• Two people have a pump that needs to be replaced every 6 years
• Four occupants have a pump that needs to be replaced every three years. 6 people live there
• The water is pumped every two years. — Pumping every year for a total of 8 residents.

• Pump every 19 years for one resident
• One pump every nine years for another resident
• Four pumps every four years for the remaining inhabitants
• And one pump every four years for the remaining occupants. A pump is required for each of the following numbers of residents: 6 for every 3 years
• 8 for every 2 years.

Tags

Septic Tank Alerts Septic Tank Alerts

WHAT HAPPENS IF YOU DON’T PUMP YOUR SEPTIC TANK?

By Admin on November 12, 2020 Your efforts to live as environmentally conscious as possible, as a responsible homeowner, are likely already underway, with practices such as recycling, composting, and purchasing energy-efficient equipment among your list of accomplishments. As a septic tank owner, you want to be sure that anything you put into your tank and septic field is causing the least amount of ground contamination as is reasonably practicable. Fortunately, there are a number of modest improvements you can do immediately to make your septic system even more ecologically friendly than it already is.

1. Have your septic tank inspected and pumped on a regular basis.
2. A bigger septic tank with only a couple of people living in your house, for example, will not require pumping as frequently as a smaller septic tank or as a septic tank that must manage the waste products of multiple family members will require.
3. When in doubt about how often to pump your septic tank, consult with a professional for advice.
4. In addition to locating and repairing any damage, a professional can ensure that the septic field is in good working order and that your septic tank is functional, large enough to handle your family’s waste, and not causing any unwanted pollution in nearby ground water.
5. Avoid flushing non-biodegradable items down the toilet or down the toilet.
6. Items that are not biodegradable are unable to properly decompose in the septic tank and might cause the system to get clogged.
7. In addition to causing issues in your house, septic system backups can damage ground water in the area surrounding your septic field.

Towels made of paper Products for feminine hygiene Grease or fats are used in cooking.

grinds from a cup of coffee Even if you have a trash disposal, the food scraps that you flush down the drain and bring into your septic system may cause unanticipated harm to your plumbing system.

Food scraps can enhance the amounts of nitrogen and phosphorus in the wastewater, which can disturb the natural bacterial balance of the septic tank, among other things.

Water conservation should be practiced.

Exceedingly large amounts of water use will interfere with the normal flow of wastewater from your home into your septic tank.

Limiting the amount of time you spend in the shower and turning off the faucet while brushing your teeth, as well as purchasing a smaller dishwasher and washing machine that use less water, are all simple strategies to reduce water use in your home.

The following are some basic steps you can take to make your septic system more ecologically friendly: save water, maintain your septic system and tank, and recycle wastewater. To get answers to any of your septic tank-related issues, get in touch with the experts at Upstate Septic Tank, LLC.

How Often Should You Pump Your Septic Tank?

The most often asked question we receive is “How often should I pump my septic tank?” This is by far the most common question we receive. New homeowners who are unfamiliar with septic systems are frequently required to learn how to properly manage their septic systems in order to avoid costly difficulties in the future. As an alternative to sewer systems and as an ecologically beneficial approach to handle domestic drain waste, a septic system is distinct from a sewer system and requires extra attention and upkeep to function properly.

Septic tank pumping should be done at the right interval for your home

The fact is that, while there are some broad suggestions that a septic system should be pumped every 2-5 years, the truth is that you actually only need to pump your system as frequently as your system requires. The amount of sludge and scum present in a septic tank is the most important element in determining how often it should be flushed. When your septic system functions, it does so by taking use of the natural force of gravity to break out the household wastewater into three distinct components:

• Solids (sludge) accumulate at the bottom of the tank
• Grease (scum) accumulates at the top of the tank
• And watery mix (effluent) accumulates in the center of the tank.

When the system is operating normally, the sludge and scum remain in the septic tank while the watery mix drains out into the drain field. The sludge and scum in the septic tank, on the other hand, must be removed from time to time in order to keep things running well. Sludge levels that reach dangerous levels, and/or a scum layer that has developed to a significant thickness, will be driven out into the drain field together with the watery effluent, resulting in a clogging of the drain field.

This can result in the growth of harmful germs in your house, as well as the need for a costly repair.

Most homeowners pumping more often than necessary are overspending!

Essentially, by pumping your septic tank too frequently, there is not enough sludge and scum buildup in the tank to ensure that you earn the optimum return on your investment in the costs of pumping your tank. Paying for the service more frequently than you need to is a waste of money that provides no additional benefits, just like paying for any other periodic maintenance. The fact is that your septic system does require a certain number of beneficial bacteria to function properly. Septic tanks employ anaerobic digestion, which is similar to the digestive system of humans, to naturally break down waste before it is sent on to the next phase of treatment.

Yeast is a type of bacterium that enters your tank each time an organic waste material is flushed down the toilet, and it breaks down the waste material into sludge and effluent.

It is really beneficial to leave your septic tank alone unless the quantities of sludge and scum in your tank exceed specified criteria; otherwise, it is detrimental. This ensures that the proper balance of bacteria is maintained in order to keep your system running properly.

So, how will you knowhow often you should pump your septic tank?

As you can see, the sludge and scum levels in your septic tank are the two most important criteria in determining your plan of maintenance. You should have your septic tank pumped when the sludge level reaches one foot at the bottom of the tank, or when the scum layer at the top of the tank has grown to almost six inches in thickness at the top. Contrary to common assumption, the majority of homes do not require yearly pumping. It is purely dependent on the level of your tank, and not on a fixed time frame.

How to Find Out if Your Septic Tank is Full

To begin, find and gently remove the septic tank lid from its mounting bracket. Use extra caution to ensure that the heavy lid does not crack or shatter, and never leave the tank open while you are not watching it! If a person or a pet falls into the tank, which has 4-5 feet of water beneath, it may be quite deadly. In the following stage, you will examine the scum trap at the very top of the tank to see how thick the scum layer is. You should pump your septic tank when the scum level has reached 6 inches thick, as a general rule of thumb.

1. While it is possible to acquire a specialized sludge level measurement stick, it is also possible to create your own at yourself.
2. The velcro end will be the one that will be inserted into the aquarium.
3. Then, holding the measuring stick straight up, verify the velcro strip for accuracy.
4. The septic tank should be pumped after it has accumulated one foot (12 inches) of sludge, as recommended by the manufacturer.

Grant’s Septic Techs, in contrast to many other septic service companies, will actually use photographic documentation to show you exactly where your waste levels are, as well as to assist you in tracking the amount of time it takes for your scum and sludge levels to build up to the appropriate levels.

If you do not require septic pumping services, there is no reason to pay for them.

For the low price of $127, we will come to your home and do all of the necessary measurements for you.

We’ll take actual images of your systems to document their current state and create a personalized proposal for your unique timetable.

In fact, if we discover that your septic tank levels require pumping at the time of inspection, we will not charge you for the measurement service.

In order to maintain the health of your septic system and get on the bestseptic tank pumping maintenance plan for your house, please contact Grant Septic Technologies at (508) 529-6255 or book a septic tank pumping appointment conveniently online.

Check to see whether your town is included in our Massachusetts service region by entering your address here.