How Do Septic Tank Drain Field Lines Work? (Solved)

The drainfield is a shallow, covered, excavation made in unsaturated soil. Pretreated wastewater is discharged through piping onto porous surfaces that allow wastewater to filter though the soil. The soil accepts, treats, and disperses wastewater as it percolates through the soil, ultimately discharging to groundwater.

  • A drainfield works through a simple process. The perforated pipe rec effluent (waste from the septic tank) and distributes it among the aggregate and as it trickles through the aggregate the soil receives the effluent. The soil will filter out the harmful bacteria and reintroduce it back to the water table.

How do field lines run from septic tank?

The distribution box receives effluent from the septic tank via one large pipe. Between four and nine lateral pipes run out of the distribution box and radiate outward in trenches to form the leach field. Since this is a gravity-based system, the lateral pipes must run at a downhill slope.

How do septic lateral lines work?

Septic tank lateral lines are also known as percolation pipes. The purpose of these lateral lines is to provide a network of pipes that the effluent from the septic tank runs through. As the effluent passes through these pipes it seeps out of the holes in the pipes and infiltrates into the soil.

How do I know if my drain field is failing?

The following are a few common signs of leach field failure:

  1. Grass over leach field is greener than the rest of the yard.
  2. The surrounding area is wet, mushy, or even has standing water.
  3. Sewage odors around drains, tank, or leach field.
  4. Slow running drains or backed up plumbing.

How often does a leach field need to be pumped?

Inspect and Pump Frequently Household septic tanks are typically pumped every three to five years. Alternative systems with electrical float switches, pumps, or mechanical components should be inspected more often, generally once a year.

How deep are leach field pipes?

A typical drainfield trench is 18 to 30 inches in depth, with a maximum soil cover over the disposal field of 36 inches.

How do you unclog a drain field?

Can Anything Unclog an Old Septic Drain Field?

  1. Shock the System With Bacteria. A septic system bacteria packet can help clean out a clogged drain field by allowing waste material to break down and drain through.
  2. Reduce Water Usage.
  3. Avoid Harsh Chemicals.
  4. Change to Gentler Toilet Paper and Soap.
  5. Contact a Septic Professional.

How long are septic lateral lines?

A typical drainfield trench is 18 to 30 inches in depth, with a maximum soil cover over the disposal field of 36 inches.

Can you clean out lateral lines?

You can choose from a couple common tools to flush these pipes. Another tool you can use is a water jet. This flexible hose is inserted into each of the septic tank laterals and high water pressure blasts through clogged debris. Moving the hose further along the line will simultaneously unclog and clean it.

Can field lines be cleaned?

It is often possible to clean and renew a clogged septic leach field instead of replacing the drain field lines. Septic field lines can fail to drain when heavy solids accumulate and block perforations in the lines. You can use a sewer jetter to clean perforated PVC septic leach field lines from 2″ to 6″ ID.

How long does a drain field last?

It’s important to consider the life expectancy of a drain-field, too. Under normal conditions and good care, a leach-field will last for 50 years or more. Concrete septic tanks are sturdy and reliable but not indestructible.

How do you know if you need a new drain field?

Drainfield pipes that crack open and break rather than clogging up release too much water into the field area. You may notice puddles or spongy and mushy ground over the area. If a technician reports high water levels during a tank inspection, you may need drainfield repairs instead of just a routine pumping.

How do you know if septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

  1. Your Drains Are Taking Forever.
  2. Standing Water Over Your Septic Tank.
  3. Bad Smells Coming From Your Yard.
  4. You Hear Gurgling Water.
  5. You Have A Sewage Backup.
  6. How often should you empty your septic tank?

Can I shower if my septic tank is full?

Only the water would get out into the leach field in a proper system unless you run too much water too fast. The thing to do is to run your shower water outside into it’s own drain area, but it may not be allowed where you are. Used to be called gray water system.

Can you have a septic tank without a leach field?

The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.

Septic System Guide: How It Works and How to Maintain It

As soon as you flush the toilet in most metropolitan locations, the waste is pumped out to the nearest sewage treatment facility. Garbage is processed at this factory, which separates it into two types of waste: water that is clean enough to be dumped into a river and solids known as residual waste. The remaining material is either disposed of in landfill or utilized as fertilizer. Septic systems, which are used in places where there aren’t any sewage treatment plants, provide a similar function, but on a much smaller scale.

What are Septic Tanks and How Do They Work?

Septic tanks are normally composed of concrete or heavyweight plastic and have a capacity of 1000 to 2000 gallons, depending on the manufacturer. In the tank, there are two chambers that are divided by a portion of a wall. The waste from the house is channeled into the larger chamber. Solids sink to the bottom of the chamber, and liquids make their way through a partial wall into the smaller second chamber, which is located above it. Anaerobic bacteria, which are found naturally in the environment, digest the solids and convert them into water, carbon dioxide, and a tiny amount of indigestible debris.

Septic Fields Distribute Liquid Effluent

The second chamber has an output pipe via which the liquid (known as effluent) from the tank is discharged to a disposal or leach field, depending on the situation. It is drained into the earth by a network of perforated pipes or through perforated plastic structures known as galleries, which are constructed of perforated plastic. It is common practice to lay the pipe or galleries in a bed of gravel, which aids in dispersing the liquid. During the course of the effluent’s percolation through the soil, the soil absorbs remaining bacteria and particles, resulting in water that is safe to drink by the time the water reaches the aquifer deeper down.

They are not much deeper than that since a large quantity of water escapes through evaporation or is transpired by grass growing above ground.

If you have sandy soils that drain too rapidly, you may not be able to treat the wastewater properly.

Sometimes the water cannot be disposed of properly because the natural soils include a high concentration of silt or clay.

Topsoil and grass are applied to the mound, which allows more water to leave through transpiration and evaporation than would otherwise be possible.

Septic Systems Rely on Gravity, Most of the Time

The majority of septic systems rely on gravity to transfer the liquid from the home to the tank and then to the field where it will be disposed of. However, due to the slope of the land, the tank or the field may need to be higher than the house in some instances. It is necessary to have a pump, or occasionally two pumps, in order for this to operate. A grinder pump, which liquefies sediments and is installed in a pit in the basement or crawlspace of the home, will be used if the tank is higher than the house.

Sewage pumps are essentially large sump pumps that are used for heavy-duty applications.

How to Treat Your Septic System

It is not necessary to do much to keep your septic system in good working order, other than cut the grass above it and keep the drainage area free of trees and plants with roots that may block it.

How Often Do You Need to Pump A Septic Tank?

You should have a septic provider pump out the particles from your tank every two years, at the absolute least. A manhole at the surface of the tank will provide the pump operator access, but older systems may necessitate digging a hole in the tank’s top so the pumping hatch can be exposed. Unless the tank is continuously pumped, sediments will build up in it and ultimately make their way into the leach field, clogging it. You’ll know it’s occurring because untreated effluent will rise to the surface of the tank and back up into the home, causing it to overflow.

Pumping the tank on a regular basis can ensure that the leach fields continue to work eternally.

What to Do if Your Septic System Fails

Pumps in a pumped septic system will ultimately fail, just as they will in any mechanical system. Most pumps are equipped with an alarm that sounds when the effluent level in the pit is greater than it should be, indicating that the pump has failed and has to be replaced. This is a job that should be left to the professionals. Visit the following website to locate a trusted list of installation and septic system service companies in your area:

  • The National Onsite Wastewater Recycling Association’s Septic Locator
  • The National Association of Wastewater Technicians
  • And the National Association of Onsite Wastewater Recycling Association

It is rare for a homeowner to have to worry about their septic system because it is well-maintained and doesn’t cause problems. Simple maintenance, such as keeping the tank pumped and the lawn trimmed, should result in decades of trouble-free service. What kind of protection do you have in place for your home’s systems and appliances against unforeseen maintenance needs? If this is the case, you might consider purchasing a house warranty.

  • Home Warranty Coverage for Roof Leaks
  • Septic Warranty Coverage and Costs
  • And more. Plans for protecting your mobile home’s warranty
  • What Is Home Repair Insurance and How Does It Work? How to Find the Most Reasonably Priced Home Appliance Insurance

How a Septic System Works – and Common Problems

This Article Discusses Septic Tanks are a type of septic tank that is used to dispose of waste. Field Sizing and System MaintenanceProblems with the Leach FieldSystem Performance Questions and comments are welcome. See Also: Septic System Frequently Asked Questions Articles on SEPTIC SYSTEM may be found here. In locations where there are no municipal sewage systems, each residence is responsible for treating its own sewage on its own property, which is known as a “on-site sewage disposal system,” or septic system, more popularly.

One of the most commonly seen types of leach field is composed of a series of perforated distribution pipes, each of which is placed in a gravel-filled absorption trench.

It’s possible that a small number of homes will be sharing a bigger communal septic system that will function in a similar manner as a single-family system.

SEPTIC TANK

The wastewater is collected in the septic tank once it has been discharged from the residence. Septic tanks are normally between 1,000 and 2,000 gallons in capacity and are composed of concrete, strong plastic, or metal, depending on the model. Highly durable concrete tanks, which should endure for 40 years or more provided they are not damaged, are the most common. Many contemporary tanks are designed with two chambers in order to maximize efficiency. Household wastewater is collected in the septic tank, where it is separated and begins to degrade before being discharged into the leach field.

  1. In the tank, oil and grease float to the top of the tank, where they are known as scum, while solid waste falls to the bottom, where they are known as sludge.
  2. Bacteria and other microorganisms feed on the sediments at the bottom of the tank, causing them to decompose in an anaerobic (without oxygen) process that begins at the bottom of the tank.
  3. Solids and grease must be pushed out of the system on a regular basis in order for it to continue to function effectively.
  4. Each gallon added to the tank results in one gallon being discharged to the leach field, leach pit, or other similar treatment facility.

Leach Field

When used properly, a leach field (also known as a “drain field”) is a series of perforated pipes that are typically buried in gravel trenches 18 to 36 inches below grade — deep enough to avoid freezing, but close enough to the surface that air can reach the bacteria that further purify the effluent (see illustration below). As little as 6 inches might separate you from the ground surface, depending on your soil type and municipal regulations. It is customary to cover the perforated pipes with approximately two inches of gravel and a layer of topsoil that is 18 to 24 inches in depth.

  • Grass is often sown above the ground.
  • The leach field is comprised of rows of perforated pipes in gravel trenches that are used to spread wastewater over a vast area in order to further purify it.
  • A bacteria-rich slime mat forms where the gravel meets the soil, and it is responsible for the majority of the water purification work.
  • Despite the fact that wastewater freezes at a far lower temperature than pure water, freezing is still a hazard in cold areas.
  • The leftover pathogens are converted into essential plant nutrients by these organisms, while sand, gravel, and soil filter out any solids that remain.
  • If the system is operating effectively, the filtered wastewater will return to the aquifer as naturally clean water that is suitable for human consumption at this stage.
  • Alternative systems may be permitted in situations when traditional leach fields are unable to function properly owing to poor soil conditions or a high water table.

These systems sometimes cost twice or three times as much as a regular system and require significantly more upkeep. Special systems may also be necessary in regions where there are flood plains, bodies of water, or other ecologically sensitive areas to protect against flooding.

SIZING THE LEACH FIELD

Using perforated pipes put in gravel-filled trenches, the drain field is sized to accommodate the number of beds in the house. In order for the system to function successfully, the leach field must be appropriately sized for the soil type and amount of wastewater, which is normally determined by the number of bedrooms in the house. In order for the liquid to seep into the soil, it must be permeable enough to do so. As a result, the denser the soil, the larger the leach field that is necessary.

  • Better to have surplus capacity in your system than to have it cut too close to the bone.
  • Septic tank backup into your house, pooling on the surface of the earth, or polluting local groundwater are all possibilities if the ground is incapable of absorbing the liquid.
  • Dense clay soils will not absorb the liquid at a sufficient rate, resulting in a backlog.
  • If the soil is mostly composed of coarse sand and gravel, it might drain at such a rapid rate that untreated sewage can poison the aquifer or damage surrounding bodies of water.
  • Alternative systems may be permitted in situations when traditional leach fields are unable to function properly owing to poor soil conditions or a high water table.
  • Near flood plains, bodies of water, and other ecologically sensitive places, special systems may also be necessary to protect people and property.
See also:  How To Remove The Top In Metal Septic Tank? (Solution)

SEPTIC SYSTEM CAREMAINTENANCE REQUIRED

If you take good care of your system, you will be rewarded with years of trouble-free operation. Pumping the septic tank on a regular basis is necessary to remove the particles (sludge) and grease layer (scum) that have built up in the tank. The solids will ultimately overflow and spill into the leach field, decreasing its efficacy and diminishing its lifespan if this is not done. The rehabilitation of a clogged leach field is difficult, if not impossible; thus, constant pumping is essential!

Cooking fats, grease, and particles may also wash into the leach field if the tank is too small for the amount of water being used or if the tank is overcrowded on a regular basis.

Extra water from excessive residential consumption or yard drainage can overwhelm the system, transporting oil and particles into the leach field and causing it to overflow.

In addition, don’t try to complete a week’s worth of laundry for a family of five in a single day. This will assist you in keeping the load controlled and will also help to extend the life of your system. To minimize overburdening the system, the following measures should be taken:

  • Distribute your washing loads and other high-water-use activities across the week
  • And In the kitchen and bathroom, use low-flow appliances, faucets, and fixtures. Toilets, in general, are the source of the greatest amount of water use. Water should be diverted away from the leach field from the yard, gutters, and basement sump pumps.

In addition, refrain from flushing sediments, strong chemicals, and just about anything else down the toilet or sink other than biological waste and white toilet paper. Avoid using garbage disposals in the kitchen. If you really must have one, keep it for small non-meat bits only. Avoid flushing chemicals or paints down the toilet since many chemicals can destroy beneficial microorganisms or cause water contamination in the surrounding area. Avoid flushing the following down the toilet:

  • Grease, fats, and animal scraps
  • Paints, thinners, chemicals, and pharmaceuticals
  • And a variety of other materials sanitary napkins, tampons, and other supplies Paper towels and disposable diapers are examples of such products. Egg shells, coffee grounds, and nut shells are all good options. Antibacterial soaps and antibiotics are available.

It is preferable to put grass over the leach field and to refrain from driving or parking in the vicinity. Excessive weight placed on top of the drain field might compress the earth, diminishing its efficiency as a drain field. Drain pipes can also become clogged by trees and plants with invasive roots. In order to prevent damage to the leach field, the following measures should be taken:

  • Heavy machinery should not be driven, parked, or stored on top of the leach field (or septic tank). Placement of a deck, patio, pool, or any other sort of construction over the leach field is prohibited. Remove any large trees or other plants with deep roots from the leach field. Grass is the most effective groundcover.

Even with careful use and routine maintenance, however, leach fields are not guaranteed to survive indefinitely. It is inevitable that the soil will get saturated with dissolved elements from the wastewater, and that the soil will be unable to absorb any more incoming water. The presence of an odorous wet area over the leach field, as well as plumbing backups in the house, are frequently the first indicators that something is wrong. Many municipalities mandate septic system designs to incorporate a second “reserve drain field” in the case that the first field fails.

A well constructed and maintained system should last for at least 20 to 30 years, if not longer than that.

More information on Septic System Maintenance may be found here.

SEPTIC SYSTEM PERFORMANCE PROBLEMS

Poor original design, abuse, or physical damage, such as driving heavy trucks over the leach field, are the root causes of the majority of septic system issues. The following are examples of common situations that might cause a septic system to operate poorly: Plumbing in the home. obstructed or insufficient plumbing vents, a blockage between the home and the septic tank, or an insufficient pitch in the sewer line leading from the house are all possible causes. Sewage tank to leach field connection Septic tank and leach field blockage caused by a closed or damaged tank outlet, a plugged line leading to the leach field caused by tree roots, or a blockage caused by sediments that overflowed from the tank Piping in the leach field.

  • Most of the time, tree roots do not make their way through the gravel bed and into the perforated pipe.
  • Reduced flows, achieved through the use of flow restrictors and low-flow faucets and fixtures, may be beneficial.
  • Because of the seasonal high water table, the soil around the trenches might get saturated, reducing the soil’s ability to absorb wastewater.
  • This may frequently be remedied by adding subsurface drains or curtain drains to intercept the water flow into the leach field region and to lower the water table in the immediate area around the drainage system.
  • Likewise, see: In order to do a perc test, who should I hire?
  • Is It Possible for Septic Systems to Last a Lifetime?

How Much Slope Do You Need for a Septic Line? Performing an Inspection on a Septic System When Is the Best Time to Take a Perc Test? Should I use a Sand Filter with my existing septic system? Examination of the WellSEPTIC SYSTEMView allSEPTIC SYSTEMarticles Return to the top of the page

What Is a Leach Field and How Does It Work?

Have you ever phoned a septic firm to assist you in resolving an issue with your system, only to hear them speak about leach field replacement or repairs and not understand what they were talking about? The leach field, also known as the drainfield, is a component of the sewage treatment system that is often overlooked. It is a network of subterranean wires or pipes that is surrounded by gravel, sand, or porous soil to keep out water. The septic tank and the distribution box or chamber are two other septic system components to consider.

How Does a Leach Field Work?

A series of tiny holes can be found along the sides and bottom of the lines or pipes in the septic leach field. As wastewater travels through the pipes, it seeps into the gravel, sand, or soil that surrounds them, causing contamination. Solid waste is retained in the septic tank and is prevented from flowing out by a filter. The bacteria in the leach field septic layer subsequently decompose the organic elements in the wastewater, resulting in its purification.

What Is the Best Leach Field Distance From Your House?

The drainfield is typically installed on an open, flat area adjacent to the home, where it can be easily seen. The actual distance between the two points may differ depending on the layout of the land and the specifications of the systems. It is preferable to make the selection with the assistance of a professional. To achieve this, the leach field should be located close enough to the house to save needless piping expenditures, yet far enough away from the house to prevent water infiltration into the home’s walls.

Consulting an expert is the most effective approach to ensure that all of these factors are taken into consideration, as well as to acquire answers to additional issues that you would have a difficult time answering on your own, such as:

  • Is it possible to have a septic tank without having a leach field? What is the function of a septic tank and leach field
  • What is the normal depth of a leach field installation
  • What are the bare minimum standards for leach field maintenance? How long should a leach field be in operation

. and much more. The bottom line is that it takes more than just knowing the concept of a leach field and reviewing a leach field size chart to design a system that works well for you. It needs much more knowledge to understand how to resolve leach field issues.

Typical Septic System Leach Field Problems

Most septic system problems may be traced back to a problem with the drainfield, in most cases. Solid waste or wastewater can accumulate on the soil at the leach field bottom, clogging the drainage system and preventing it from functioning properly. This generally occurs when one of the following conditions exists:

  • Besides chemicals, you’re also draining paint, grease, and other complicated compounds that are tough to filter out. The amount of wastewater that has to be treated exceeds the capacity of the system. The top layer of the drainfield was damaged as a result of building activities or cars. The volume of water that needed to be filtered increased as a result of excessive rainfall or snow. Plant and tree roots cause obstructions in the pipes. Several of the pipes are fractured or fissured, and they are ancient and rusted

Chemicals, paint, grease, and other complicated compounds that are difficult to filter are being drained. In order to treat the amount of wastewater that has been generated, more capacity has been added to the system. Construction work or automobiles caused damage to the top layer of the drainfield. Rainfall or snowfall in excess of normal amounts added to the volume of water that needed to be filtered. There are problems with the pipes caused by plant and tree roots They are rusted, damaged, or fissured due to their age and neglect.

Drain Fields 101

There are many people who are unfamiliar with the concept of septic drain fields (sometimes referred to as leach fields), and this might make them feel intimidated. In contrast to the tank, a drain field is often devoid of indicators. When there is no problem with the drain field, it is easy to overlook it. Because the drain field is the most expensive component of a septic system, it is unfortunate that this has happened. Understanding your leach field may help you extend the life of your septic system while also saving you a significant amount of money.

Is it possible for you to feel significantly more at ease with regards to owning and maintaining your septic system?

This book is packed with in-depth knowledge about everything septic, yet it is also readily skimmed.

Drain Field Layout

A typical drain field is made up of three basic components: excellent soil, gravel, and perforated pipe (or tubing with holes in it). A drainfield operates according to a straightforward procedure. The effluent (waste from the septic tank) is collected by the perforated pipe and distributed among the aggregate; as the effluent trickles through the aggregate, it is absorbed by the soil. The soil will filter out the dangerous bacteria, which will then be reintroduced back into the water table. When the septic tank has completed its task of decomposing the waste, it overflows into the drain field.

  1. Perforated pipes are pipes that feature holes towards the bottom that are not visible from the top.
  2. As soon as the effluent is discharged from the pipe, it enters the aggregate.
  3. The aggregate’s goal is to equally spread the effluent so that it may be absorbed by the soil in the same proportion as before.
  4. If the soil beneath the stone becomes moist, the stone aggregate will begin to fill up the spaces between the stones themselves.
  5. If the effluent level rises to or exceeds the level of the stone aggregate, there is no more suitable soil on the sides or bottom of the drain field to be found.
  6. A drain field’s ability to operate is dependent on the quality of the soil.
  7. The majority of these tests are concerned with your soil, namely with what it is made of and how well it drains.
  8. Other soils, particularly those that are more clay-like, will not drain as effectively and may necessitate the construction of a bigger drain field to compensate for the lack of adequate drainage.

These tests entail the excavation of test pits and the performance of a percolation test (also known as a “perc” test). Now that we have a better understanding of how a drain field works, we can look at what may go wrong in one.

Drain Field Problems

When you notice patches of thick, lime green grass beginning to grow above your drain field, this indicates that the drain field is not operating properly. But, how did it get there in the first place? It everything comes down to the dirt. As the soil begins to fill up with effluent and sludge, the soil’s capacity declines, and effluent begins to leak out of the ground as a result. The easiest way to think about this is to imagine the drain field as a sponge filled with water. While filling up, a sponge takes up all of the available space in the sponge.

  1. Due to the lack of a suitable location for the liquid to go, it rises.
  2. To return to the sponge analogy, let us say It will hold water for as long as you keep filling up the sponge with water until it gets a chance to drain or dry up.
  3. Not only that, but the soils may be permanently destroyed as a result of the contamination.
  4. This is why it is so critical to ensure that you are not consuming more water than you require and that there is no extra water departing your home and entering your septic system at any time.
  5. Sump pumps, in particular, may be quite hazardous.
  6. A series of severe rains might cause irreversible damage to your irrigation system.
  7. It doesn’t matter how little the trickle is now; it will cause problems down the line.
See also:  How Much Does It Cost For A New Anaerobic Septic Tank System? (Correct answer)

This is accomplished by driving across a field on a continuous basis or by moving massive construction trucks across a field.

In the end, it all boils down to the very important empty area in the drain field.

Heavy construction vehicles have enough weight to smash pipes on the job site as well as in the workshop.

If you want to drive near your drain field, it is really useful to be aware of the specific location of the field.

Inform your construction crew that driving is not permitted on the field.

Large construction vehicles may wreak havoc on your field because of their weight. if you are unsure of the location of your field, you may either have your pumper locate it during routine maintenance or you can request that an inspector come out and locate it for you.

Locating Your Drain Field

As a homeowner, it is in your best interests to be aware of the location of your drain field. Whether you have a septic check performed before to purchasing your home, ask if the inspector can include a map of the drain field in the report. Our reports will include a photograph of the area where the drain field is located. There are a number of reasons why this is beneficial to the maintenance of your septic system.

  • As previously said, you should take precautions to ensure that no one drives over your drain field. Many homeowners desire to plant trees, and this is true for building projects as well. Trees can cause significant damage to a drain field. This will be discussed in greater detail later on. You want to be certain that no surplus water is dripping down your drain field or into your basement. In the long term, any precipitation from a roof leader or excess runoff will cause harm to the system. As part of routine maintenance, a reputable pumper will probe your field to determine how much moisture is currently there
  • It is a good idea to keep an eye out for any indicators of malfunction. A strong possibility that sewage is being discharged from the drain field exists if the drain field begins to seem to have sections of dense, brilliant green vegetation

Drain Fields and Trees

The development of trees is another important component in the health of your septic system. Many times, individuals may plant trees on top of your irrigation system or extremely close to it if they do not know where your field is. We may see this during inspections and consider it a red signal. The roots that extend into the field are the primary source of worry. You may assume that doing so would assist with drainage, but it really has the opposite effect. The roots of the trees will penetrate the pipes and create a “root ball” around the pipes.

  1. The sludge is subsequently trapped between the hairs of the seal, resulting in a watertight closure.
  2. Inevitably, the region immediately preceding the halt absorbs the entirety of the liquid and begins to saturate.
  3. It is recommended that any trees within a 10-foot radius of any septic system be removed.
  4. The greater the distance between a tree’s location and any component of a septic system, the better.
  5. There is still a lot to learn about your specific drain field and how to manage it, so keep reading.
  6. In the meanwhile, have a look at our booklet, which will equip you to cope with any problem you may encounter as a septic system proprietor.

How your Septic System Works

Although what occurs with wastewater is sometimes overlooked when seeking to purchase a new home, it is a critical component of any residence. There are two major methods in which the drain system for your home disposes of wastewater; you will either be connected to a sewer system or have a septic tank installed. The majority of people are inexperienced with the operation of septic tanks, which can create worry among first-time homeowners. In order to handle all wastewater from the house and disseminate it in a manner that is safe for both you and the environment, septic systems are specifically constructed.

Septic Tank

The septic tank is the first phase in the wastewater treatment process. Every plumbing fixture in your home will discharge into the septic tank, where it will begin to decompose. Solid matter will settle to the bottom of the container, creating an environment that is favourable to microbial growth. Septic tanks are made up of two halves that are joined by L-shaped pipes known as baffles, which allow the bacteria to begin breaking down the solid debris and releasing water called effluent as well as oil that floats to the top.

Only the effluent water is allowed to pass via these valves and into the septic system. It is necessary to repeat this procedure twice more before the wastewater is ready to be discharged back into the environment.

Drain Field

In a drain field, also known as a leach field, effluent water is allowed to dissipate into the soil through a network of perforated pipes. These pipes are typically buried one to two feet below ground level and are surrounded by gravel to aid in the distribution of the water uniformly throughout the system. In addition, when the effluent water sinks to the water table, the earth absorbs any extra bacteria or particles that were not removed by the septic tank. By the time it reaches the water table, the water has been proven to be absolutely harmless.

How to Care for your Septic System

Being aware of the operation and maintenance of your septic system will help it survive longer and continue to perform properly for a long period of time. When it comes to septic system maintenance, there are numerous factors to keep in mind. In order to function properly, septic systems require a delicate balance of bacteria and waste products. If you flush a large amount of sediments or items that cannot be broken down by these bacteria, the system may become clogged and ineffective. Waste goods such as disposable wipes, coffee grounds, feminine products, and many more can cause difficulties in your septic system.

To avoid this potential problem, make sure that you are aware of the location of your drain field.

To avoid this potential problem, make sure that you are aware of the location of your drainage field.

Every two to three years, it is advised that you pump the tank out.

Signs of Failure

Knowing some of the warning signs of a probable breakdown in your septic system might help you avoid more serious problems in the future. When the system is not functioning effectively, it can manifest itself in a variety of ways, including an unpleasant odor around the septic field, sluggish emptying toilets and sinks, and excessive plant growth over the field. You should contact a specialist if you detect any of the indicators of failure listed above, as soon as possible. Withholding attention to any problems with your septic system will result in more extensive and expensive repairs down the road.

Many homeowners are concerned about how their septic system works, but this is not something that they need be concerned about.

Posts from the recent past

How Does a Septic Tank Work?

Mr.

Fix-It-Up-For-The-Family You may save a lot of money if you understand how a sewage treatment system works—and what can go wrong—so that you can handle your own septic system maintenance.

How does a septic tank work?

Pumping the tank on a regular basis eliminates sludge and scum, which helps to keep a septic system in good working order. It is possible for a well-designed and well built septic system to last for decades, or it might collapse in a matter of years. It is entirely up to you as long as you can answer the question of how do septic tanks function. Healthy septic systems are very inexpensive to maintain, but digging up and replacing a septic system that has completely collapsed may easily cost tens of thousands in labor and material costs.

It’s critical to understand how a septic tank works in order to maintain one.

Let’s take a look below ground and observe what happens in a properly operating septic system, shall we?

Understand that a septic system is a cafeteria for bacteria

Bacteria are responsible for the proper operation of a septic system. They decompose garbage, resulting in water that is clean enough to safely trickle down into the earth’s surface. The entire system is set up to keep bacteria healthy and busy at all times. Some of them reside in the tank, but the majority of them are found in the drain field. 1. The septic tank is the final destination for all waste. 2. The majority of the tank is filled with watery waste, referred to as “effluent.” Anaerobic bacteria begin to break down the organic matter in the effluent as soon as it enters the system.

  1. A layer of sludge settles to the bottom of the container.
  2. 4.
  3. Scum is mostly constituted of fats, greases, and oils, among other substances.
  4. Grease and oils float to the surface of the water.
  5. (5) A filter stops the majority of particles from reaching the exit pipe.
  6. The effluent is discharged into the drain field.
  7. Effluent is allowed to leak into the surrounding gravel because of holes in the drain septic field pipe.
  8. The garbage is completely decomposed by aerobic bacteria found in gravel and dirt.
  9. Potable water seeps into the groundwater and aquifer system from the surface.

Septic Tank Clean Out: Don’t abuse the system

Septic systems that have been correctly planned and constructed require just occasional ‘pumping’ to remove the sludge and scum that has built up inside the tank.

However, if you don’t understand how a septic tank works, you may unintentionally hurt or even destroy the system.

  • Drains are used to dispose of waste that decomposes slowly (or not at all). Cigarette butts, diapers, and coffee grounds are all known to cause issues. Garbage disposers, if utilized excessively, can introduce an excessive amount of solid waste into the system. Lint from synthetic fibers is emitted from washing machine lint traps. This substance is not degraded by bacteria in the tank and drain septic field. Bacteria are killed by chemicals found in the home, such as disinfecting cleansers and antibacterial soaps. The majority of systems are capable of withstanding limited usage of these goods, but the less you use them, the better. When a large amount of wastewater is produced in a short period of time, the tank is flushed away too quickly. When there is too much sludge, bacteria’s capacity to break down waste is reduced. Sludge can also overflow into the drain field if there is too much of it. Sludge or scum obstructs the flow of water via a pipe. It is possible for tree and shrub roots to obstruct and cause harm to a drain field. Compacted soil and gravel prevent wastewater from seeping into the ground and deprive germs of oxygen. Most of the time, this is caused by vehicles driving or parking on the drain field.

Get your tank pumped…

Your tank must be emptied on a regular basis by a professional. Pumping eliminates the accumulation of sludge and scum that has accumulated in the tank, which has caused the bacterial action to be slowed. If you have a large tank, it may be necessary to pump it once a year; but, depending on the size of your tank and the quantity of waste you send through the system, you may go two or three years between pumpings. Inquire with your inspector about an approximate guideline for how frequently your tank should be pumped.

See also:  Where To Get A Concrete Septic Tank Top? (Question)

…but don’t hire a pumper until you need it

Inspections and pumping should be performed on a regular basis. However, if you’re not afraid of getting your hands dirty, you may verify the sludge level yourself with a gadget known as The Sludge Judge. It ranges in price from $100 to $125 and is commonly accessible on the internet. Once you’ve verified that your tank is one-third full with sludge, you should contact a professional to come out and pump it out completely.

Install an effluent filter in your septic system

Garbage from your home accumulates into three distinct strata. The septic filter is responsible for preventing blockage of the drain field pipes.

Septic tank filter close-up

The septic tank filter is responsible for capturing suspended particles that may otherwise block the drain field pipes. Obtain an effluent filter for your tank from your contractor and place it on the outflow pipe of your tank. (It will most likely cost between $50 and $100, plus labor.) This device, which helps to prevent sediments from entering the drain field, will need to be cleaned out on a regular basis by a contractor to maintain its effectiveness.

Solution for a clogged septic system

If your septic system becomes clogged and you find yourself having to clean the filter on a regular basis, you might be tempted to simply remove the filter altogether. Hold on to it. Solids, wastewater, and scum are separated into three levels in septic tanks, which allows them to function properly (see illustration above). Solids sink to the bottom of the container, where microbes breakdown them. The scum, which is made up of trash that is lighter than water, rises to the surface. In the drainage field, the middle layer of effluent leaves the tank and goes through an underground network of perforated pipes to the drainage field.

  • Keep the effluent filter in place since it is required by your state’s health law.
  • Waste particles might flow through the filter and clog the perforated pipes if the filter is not used.
  • Your filter, on the other hand, should not require cleaning every six months.
  • A good chance is high that you’re flushing filter-clogging things down the toilet, such as grease, fat, or food scraps.
  • A garbage disposal will not be able to break down food particles sufficiently to allow them to flow through the septic tank filtration system.
  • Plastic items, disposable diapers, paper towels, nonbiodegradable goods, and tobacco products will clog the system if they are flushed through it.

For additional information on what should and should not be flushed down the toilet, contact your local health authority. More information on removing lint from your laundry may be found here.

Get an inspection

Following a comprehensive first check performed by an expert, regular inspections will cost less than $100 each inspection for the next year. Your professional will be able to inform you how often you should get your system inspected as well as how a septic tank functions. As straightforward as a septic system appears, determining its overall condition necessitates the services of a professional. There are a plethora of contractors who would gladly pump the sludge out of your tank, but many, in my experience, are unable to explain how a septic system works or how it should be maintained.

A certification scheme for septic contractors has been established in certain states; check with your state’s Secretary of State’s office to see whether yours is one of them.

Also, a qualified inspector will be able to tell you whether or not your tank is large enough to accommodate your household’s needs, as well as the maximum amount of water that can be passed through it in a single day.

As you learn more about how a septic tank works, your professional should be able to tell you whether or not your system will benefit from this treatment.

Alternatives to a new drain field

If an examination or a sewage backup indicate that your drain field is in need of replacement, the only option is to replace it completely. As a result, it’s important to talk with a contractor about other possibilities before proceeding with the project.

  • Pipes should be cleaned. A rotating pressure washer, used by a contractor, may be used to clean out the drain septic field pipes. The cost of “jetting” the pipes is generally around $200. Chemicals should be used to clean the system. A commercial solution (not a home-made one) that enhances the quantity of oxygen in the drain field should be discussed with your contractor before installing your new system. Septic-Scrub is a product that I suggest. A normal treatment will cost between $500 and $1,000. Make the soil more pliable. The practice of “terra-lifting,” which involves pumping high-pressure air into several spots surrounding the drain field, is authorized in some regions. Some contractors use it to shatter compacted dirt around the pipes. Depending on the circumstances, this might cost less than $1,000 or as much as $4,000 or more.

Protect your drain septic field from lint

When this device is in place, it inhibits lint from entering the system, especially synthetic fibers that bacteria are unable to digest. One of these filters, which I’ve designed and termed theSeptic Protector, was invented by me. An additional filter is included in the price of around $150 plus delivery. Learn more about how to filter out laundry lint in this article.

Don’t overload the septic system

Reduce the amount of water you use. The volume of water that flows into your tank, particularly over a short period of time, can be reduced to avoid untreated waste from being flushed into your drain field. Replace outdated toilets with low-flow ones, install low-flow showerheads, and, perhaps most importantly, wash laundry throughout the week rather than just on Saturday mornings to save water.

Meet the Expert

Septic systems, according to Jim vonMeier, are the solution to America’s water deficit because they supply cleaned water to depleted aquifers, according to vonMeier. He travels the country lobbying for septic systems, giving lectures, and giving testimony. For septic system inquiries, as well as information on the operation of the septic tank, contact him by email.

What You Need to Know About Your Septic System’s Drainfield

In the absence of a municipal sewer system, the likelihood is that you are utilizing an aseptic system for all of your wastewater disposal. It is your septic tank that is emptied every time you flush the toilet or when water drains down the drain from sinks or the laundry.

Residential septic systems are available in a variety of configurations, but they invariably include an aseptic tank, into which wastewater is channeled for treatment, and a drainfield, into which effluent evaporates or drains into the ground.

What Is a Septic System Drainfield?

In order for a septic system to work correctly, drainfields, also known as leach fields or absorption fields, must be installed. Drainfields collect and manage wastewater that has been pumped from the septic tank and are thus essential. They are comprised of perforated pipes that are buried two to four feet underground and lead away from the tank. Septic tanks would overflow if a drainfield was not there, resulting in runoff and a foul stench in your yard. Whenever everything is operating properly, the soil in the drainfield filters the wastewater, and naturally occurring bacteria and microorganisms decompose the solid waste.

What Are the Signs There Is a Problem With Your Drainfield?

  • Waste smells, particularly outside in the vicinity of the septic tank and drainfield
  • Predominant presence of dark green, luxuriant flora covering the drainfield It may be visually appealing, but it indicates a severely overburdened septic system. It’s possible to have wet, soggy, or spongy regions over your septic tank or drainfield even in dry weather. It’s possible that you’ll discover puddles of standing water. Kitchen and bathroom drains that are too slow
  • Toilets that are overflowing or sewage backups

What Are the Causes of These Problems?

A drainfield can live for 50 years or longer if it is properly cared for and maintained. However, several of the indications listed above might indicate that a drainfield is beginning to fail. The system just does not have the capability to take any additional garbage. Sewage backups, a foul stench outdoors, and sluggish drainage within your house are all possible consequences of this.

Crushing damage

When erected over a drainfield, heavy objects such as a shed, animals, or automobiles can cause the pipes below to get damaged or destroyed. Compaction of the soil can also be caused by an excessive amount of weight on the drainfield. Wastewater cannot be adequately absorbed in compacted soil, resulting in the occurrence of many of the symptoms described above.

Pipes are blocked

A possible source of obstruction is the infiltration of tree and plant roots into sewer lines, which prevents wastewater from draining correctly. The accumulation of sludge and the flushing of objects that should not be flushed down the toilet can also cause clogging of pipes.

The septic system is overloaded

Doing multiple loads of laundry on the same day as running the dishwasher might cause the septic system to become overburdened. A leaky faucet or a gurgling toilet might also be problematic. Time is required by all septic systems in order for the effluent to pass through the treatment procedures. It is otherwise necessary to compel wastewater to flow into the drainage field at a quicker pace than the drainage field is capable of handling. This can result in standing water or the mushy, spongy conditions described above.

Gutter downspouts draining over the drainfield

Having gutters that drain across the septic system drainfield makes it more difficult for the drainfield to absorb wastewater and perform its function. This might result in a squishy region that is constantly wet or standing water.

What to Do to Maintain a Healthy Drainfield

  • Heavy machinery, automobiles, recreational vehicles, boats, grazing animals, and structures should be kept away from the area above your drainfield. Planting trees or other plants over your drainfield might cause harm to the pipes since the roots will grow into them. Make certain that all gutter downspouts are directed away from the drainfield. Every two to three years, have your septic tank pumped. Solids are conveyed into the drainfield by the absence of frequent pumping, resulting in blockage of the pipes. Apart from the waste that comes out of your body, the only item that should be flushed down the toilet is toilet paper. Other solids should not be flushed. Additionally, refrain from dumping any fats, oils, or grease down your drains. You should space out your laundry and dishwashing days so that you don’t overburden your septic system.

SEPTIC-TANK DRAIN FIELDS: WHAT YOU SHOULD KNOW ABOUT PROTECTING THEM FROM HARM

While a septic system may appear to be impenetrable, the fact is that neglect may cause severe damage, which may even result in a complete shutdown of the system. Septic systems may give many years of reliable service if properly maintained, but they can also be completely damaged by reckless actions. The drain field is an element of your septic system that is particularly prone to failure. More information on this crucial component, as well as numerous important measures that will help to keep your drain field in good condition, may be found in the sections below.

Generally speaking, a septic drain field is the region where effluents, which are liquid waste products produced by the system, are discharged into the soil, after which the liquid waste products seep through the soils around the area.

From a structural standpoint, drain fields are composed of many parallel pipelines that empties into a particular substrate that is buried several feet beneath the surface.

It is for this reason that being vigilant in protecting the septic drain field is so critical to success.

Because drain fields are so critical to the overall health of a septic system, you must take a proactive approach to prevent them from being damaged or destroyed.

Keep impurities out of the system that might clog it.

Never put grease, oil, or other scum-forming compounds into the septic system in order to avoid this situation from developing.

Instead, direct gray water to a sump pump that will be used solely for disposal.

Drain-field components are often only a few feet below ground level, making them accessible to things that might create a clog or other problems.

Among the other potentially harmful aspects are storage sheds and pavement that is too close to the drain field; anything that creates long-term weight stresses on drain fields should be avoided.

Keep biological activity at a high level.

It is possible to disrupt this activity by killing beneficial microorganisms and cause an imbalance in the environment, which may result in the cessation or reduction in the effectiveness of filtering and cleansing of effluent.

Detergents, pesticides, insecticides, fertilizers, and other potentially toxic compounds are examples of such agents.

On a regular basis, carry out the necessary “upstream” maintenance tasks.

However, even in the absence of dangerous chemicals being introduced into the effluent, the regular processes occurring inside a septic system might eventually result in the closure of drain fields.

Effluent filters, for example, should be cleaned and replaced on a regular basis.

Another important maintenance operation is the pumping out of accumulated sludge that has developed at the tank’s bottom.

Regular pumping of tanks, which may be as often as once a year, is necessary to prevent sludge from departing the tank and contaminating the drain-field lines and causing a backup.

Leave a Comment

Your email address will not be published. Required fields are marked *