How Do I Find The Cleanout On A Septic Tank?

How Do I Find My Septic Tank Cleanout? When locating the home’s sewer line and where it leads out of the home, there will often be a cap that can be removed. This is where a cleanout for the sewer line that connects from home to the septic tank is located.

co.thurston.wa.us

If you do have an exterior sewer cleanout, it’s usually easy to find. You can locate the lid of your septic tank by poking the ground every few feet with a metal probe. Sewer cleanouts are installed on the lateral sewers line that connects your house to the septic tank or public sewer system in the street.

How do you find a cleanout on a house?

Here are some simple tips to help you find it:

Walk around the perimeter of your house and look at the area close to the foundation.
A sewer cleanout is generally, but not always located outside a bathroom.

Since cleanouts aren’t needed often, yours may be covered by bushes, underbrush or grass.

What is a septic tank cleanout?

The septic systems cleanout is the short PVC pipe with removable cap that sticks out of the ground between your house and the septic tank. If the cleanout does contain backup, it could be from the septic system or it could be a blockage between the cleanout and the tank.

What does a drain cleanout look like?

A drain cleanout provides access to your main sewer line and is located outside of your home in the front or back yard. Cleanouts typically go unnoticed until there is a problem. They look like capped pipes sticking a few inches above the ground.

How do I find my main drain line?

It can usually be found in the basement, garage, or crawl space. You will want to look for a pipe that is about four inches in diameter with a screw cap on the top with a notch or a square knob at the top. Note that some houses have an indoor sewer line cleanout point, while others might be located outdoors.

How do I find my sewer pipe UK?

To find the drains on your property, consult with your local council to search for the drainage plans for your property based on the age of your property. A CCTV drain survey can also map and record the drainage system on your property if you are unable to find property deeds.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

Your Drains Are Taking Forever.
Standing Water Over Your Septic Tank.

Bad Smells Coming From Your Yard.
You Hear Gurgling Water.
You Have A Sewage Backup.

How often should you empty your septic tank?

How do you clean out a septic tank drain line?

Simple Cleaning Agent — White vinegar is a better option, providing a natural cleaning agent that can help keep septic drains free from mold growth and odor. It is recommended that you pour one cup of vinegar down the drains weekly and let it soak for about a half hour, then flush it through the system with water.

How do you find a clogged sewer line?

Run the water in the sink closest to the toilet for about a minute. If the toilet bubbles (gurgles) or the water level in the toilet rises, you may have a clogged sewer line. When your washing machine drains, the toilet overflows or water backs up in the tub or shower.

What is a two way cleanout?

A two-way cleanout provides access in both directions. With this U-shaped cleanout, we are able to use it to access both the yard and the house lines.

Does every house have a cleanout?

Every house should have one, although unfortunately, some houses don’t. Not only do all homes not have plumbing clean-outs, often those that do have an insufficient number. The Licensed specialists at Augerpros Plumbing can provide the installation of extra clean-outs if needed, and in the recommended locations.

How To Install a Septic Tank Sewer Cleanout

PVC tee fitting

Tape measure
PVC 4-inch pipe
PVC pipe cap

PVC pipe cleaner
PVC pipe cement
Pop-off fitting (optional)

Shovel
Hacksaw
PVC tee fitting

A clean-out port in your drain pipes may save you a lot of time and money, as well as avoiding a potentially nasty issue in some situations. In the event of a blockage, a clean-out allows you to quickly and easily access the drain line, and in some cases, it can avoid flooding inside your house. If the clean-out is correctly installed, it may also be utilized for routine septic tank cleaning while pumping out the septic tank.

Step 1

Locate the drain line as it exits the home and follow it. The majority of septic tanks are placed at least 10 feet away from the house. Choose a site for the clean-out that is roughly 5 feet away from the house and put it there. The drain line should be no deeper than 2 feet or no deeper than 2 feet and 1 inch.

Step 2

3 to 6 inches deeper than the drain line should be dug out of the ground. In order to have enough space to work, you will also need to expose 3 to 4 feet of the pipe on either side. Remove any loose dirt from the drain line and make ensure that no water or appliances are running inside the house in order to keep the drain line as dry as possible.

Step 3

Remove a portion of pipe from the drain line by cutting into it. The length of the excised part should be the same as the length of the tee fitting. Make sure to account for the flange on the tee fitting, which will be used to enter the drain line on both ends of the fitting. Make use of the pipe cleaner to clean both ends of the drain line as well as the fitting on the end of the line.

Step 4

Connect the tee fitting to the drain line using the hose clamp. Place the fittings such that the open port is pointing upward when the fittings are closed. Make use of sufficient quantities of pipe cement to guarantee a firm and secure fit. Calculate the distance between the fitting and the ground level. A piece of PVC pipe should be cut to match this measurement and firmly glued into the tee fitting to complete the installation.

Step 5

Place the PVC pipe cap on top of the new pipe and tighten it down. It is recommended that you acquire a threaded cap so that it may be removed easily when service is necessary. A pop-out fitting is another option to consider. If there is a backup of water in the pipe, the weighted cap on this fitting will keep it securely in place. This will cause the insert to pop out and enable the water to drain outdoors instead of backing up into the house. These are not permissible in all jurisdictions, so verify your local codes before putting them in.

Tip

When cutting into the drain line, always sure to use eye and hand protection. There will be sewage leftovers in the line, and you will want to prevent your eyes and skin from being contaminated as much as possible. Some homeowners may build a clean-out on both sides of the septic tank so that they can have easy access to all drain pipes as well as the tank itself while doing maintenance.

Do You Know about Your Sewer Cleanout – Why it’s Important and How to Locate It?

Sewer cleanouts aren’t something that comes up in regular discussion, but when something goes wrong, they’re a hot topic, aren’t they? In reality, the majority of homeowners aren’t even aware of the existence of their cleanouts, let alone what they perform. Because backed-up waste water in a house is such a horrible thing to think about, let alone experience, we thought we’d walk homeowners through the process of finding and using a sewer cleanout – including why it’s vital and where to look.

What is a Sewer Cleanout and how does it work?
They are brought together by a major pipe system known as a stack.
Things do happen, though, such as jams of a dozen various varieties preventing a pipe from enabling waste water to pass through it, for example.

What is the significance of these individuals?
In the event that waste water seeps into the flooring and baseboards before being cleaned up, the water will remain there unless it is cleaned quickly by specialists.
Furthermore, if the health agency becomes aware of the situation, the homeowner will be punished and ordered to clean up the mess.

The presence of a sewage cleanout that does not have a proper cap on it means that those gases might be released into the air around or within the house.

Not all plumbing is up to code, or in other cases is only up to code to the point of passing inspection.

This might result in the cleanout being located in a variety of locations, including on the drain stack in the basement.

Stacks are equipped with a roof exit, where a cleanout might be installed.

In most cases, the pipes will be either cast iron or PVC (plastic) piping, with a cap on top that will be either plastic, brass, or cast iron in construction.

Absolutely.

Second, locate the sewer cleanout that is located outside the home.

If homeowners are able to remove the cap, they will be able to go into the line with a snake and unclog it.

They will be able to open the cap since they will have the appropriate wrenches.

Every day, hundreds of individuals are faced with the task of unclogging their sewer cleanout, but many have no idea where to begin.

On rare occasions, though, you’ll need to know where the sewer cleanout is in order to avoid flooding.

We hope that this explanation has been helpful. Bay Area Plumbing is ready for all of your plumbing requirements 24 hours a day, seven days a week. If you require assistance with a blockage, please do not hesitate to contact us for further information and assistance.

Septic Tank Clean-Out 101

Septic tanks of various shapes and sizes are pumped out by John Kline Septic Services. From residential to commercial to municipal work, there is something for everyone. Maintaining your septic tank is essential, whether you’re in need of a clean-out or you simply want to understand more about the procedure. To learn more, continue reading or contact us now to arrange service. We provide same-day service for emergencies, and our technicians are available 24 hours a day, seven days a week. Always In order to ensure that your septic tank gets cleaned out through the largest available opening, Your septic tank or system may have more than one entry point, depending on the type of tank or system you have installed.

This is normally covered with a cement lid or manhole cover that is 18-24 inches in diameter and is often raised to grade with an extension.
It also makes it difficult to completely clean out the tank, therefore it’s critical to ensure that your tank is well cleaned from the primary entry.
In spite of the fact that we recommend that you have your tank pumped out every two to three years, depending on the size of your tank and the number of people living in your home, you may be able to extend the period between clean-outs without suffering any difficulties.

When it comes to septic tank cleaning, we recommend that you never go more than FIVE years between cleanings to ensure everything is operating correctly and that your tank is filtering out waste in the appropriate manner.
Ensure that your septic tank is easily accessible before scheduling your septic clean-out.
Make a notation on your manhole cover or access port if it is hidden by your landscaping so that your technician can easily locate the cleanout when he or she arrives on site.

Simply inquire or contact us in advance to inquire about the possibility of installing a riser at the time of your septic pumping.

Are you prepared to get your septic tank cleaned? We provide business and residential septic pumping services in Lancaster, Pennsylvania and the adjacent areas, including York, Lebanon, Berks, Chester, and Dauphin counties, as well as the surrounding areas. Make a call right now at 717-898-2333.

Sewer Clean Out for Residential Homes 101

a forest path / Photo courtesy of Fotolia Septic system failures can be prevented by utilizing a variety of fail-safes in contemporary plumbing. Your home is well-protected against sewage backups, with everything from drain traps to sump pumps and vent pipes. The sewage clean out is an extremely vital component of this system, and you should be aware of its existence. Despite its harmless look, having one or more clean outs in your home’s sewage line may have a significant impact on both the health of your sewer line and the health of your wallet.

What is a Sewer Clean Out?

In most cases, the sewer clean out is a capped pipe that is positioned on or near your property line and connects to the lateral sewage line. In plumbing, a lateral sewer line is a pipe that links the sewage lines in your house to either the municipal sewer system or your septic tank. Septic waste can back up into drains when the lateral becomes blocked, causing a nuisance as well as potential health risks for anyone who are exposed to it. Maintaining your sewer pipes and draining water in the event of a backup are two important benefits of having a clean out.

How to Find the Sewer Clean Out

The sewer clean out is a tiny, capped conduit that protrudes from the ground surface. Unfortunately, finding it is not always straightforward. The fact that many homes have several clean outs and, in some rare circumstances, the clean out is actually placed within the house just adds to the complexity of the situation. The methods that follow should assist you in finding the clean out more quickly.

The Sidewalk Should Be Checked– In many localities, the location where your lateral joins the municipal sewer line is indicated on the sidewalk. Along the curb and sidewalk, look for a letter ‘S’ that has been stamped or painted. If you come across this marker, you may easily visualize a straight line from the mark to your house, where the lateral may be located if you look closely. In certain situations, you may even be fortunate enough to come upon a clean out in the neighborhood of where you are looking. Search Near Your Foundation– In many circumstances, locating the sewer clean out near the road is impractical, or the home’s former owners elected to have more than one sewer clean out built. In these cases, you should search near your foundation. When you have a septic system in place, sewer clean outs are also typically positioned close to the home’s location. If you are more than three feet from the foundation, you will most likely find the cap anywhere between the road or septic tank and the point at which your home’s sewage line exits the foundation and enters the ground
Look for extra clean outs inside– Some homes, particularly older ones, may have clean outs that are either hidden within the structure or protrude from the exterior walls of the structure. Check the basements, crawl spaces, and attic for probable vent pipe sites along with the vent pipe. Most of the time, indoor sewer clean outs will look to be a junction with one side of the Y or T shaped intersection being capped. These are important for keeping your interior pipelines in good condition, even if they are not essential.

What if the Property Lacks a Sewer Clean Out?

It is possible that older properties may not have a sewer clean out. The latter is particularly true if one is not obligated to do so by municipal or state plumbing regulations. It is typically preferable to have one installed in such situations. Sometimes your home has a clean out that has just been covered up by dirt, which is another situation. If you suspect the house has a clean out but have been unable to identify it, you may want to conduct some light digging along the ground where you assume the clean out should be in order to locate it.

Benefits of a Sewer Clean Out

While having a sewage clean out is mandated by law in certain jurisdictions, if you have an older property or live in a state where they are optional, you may find yourself without one. There are, however, various advantages to having a clean out installed on your home, including the following:

Lower Maintenance Costs

The clean out gives you direct access to the sewage lateral on your property’s property. This means that a plumbing professional may monitor the water flow from each individual faucet in your home to verify that there are no blockages or other pipe concerns during their monthly maintenance visits.

Cheaper and Easier Cleaning

When it comes to cleaning your sewage lines, a plumber would normally have to remove your toilet or perhaps climb onto the roof to do so.

They will have easier access to the sewage lateral if they have a sewer clean out performed. Because of the time and effort savings, you will have a lower overall bill.

Protects Your Landscaping

If you have a big clog, one advantage that only becomes evident in an emergency situation is the fact that a sewer clean out can assist eliminate the need to dig up your yard in the case of a clog. The sewer lateral, in contrast to many of the pipes within your home, is totally underground and cannot be inspected for wear or damage without digging the area where it is located. The sewer clean out serves as an entry point for your lateral, allowing it to be more readily examined and maintained.

BackflowPrevention

It can also be used as an external drain if a large amount of blockage is encountered. Taking the clean out cap off will allow you to drain the extra water, which will save your property from flooding. When there is an issue with the municipal sewer that is forcing water back up into your lateral, this may also be beneficial.

How to Install a Sewer Clean Out

It is necessary to complete many steps in order to install a clean out. Depending on the circumstances, your local municipality may provide programs to assist with the cost of installation, particularly in situations where a sewer clean out was not previously required by code. Before you begin, make sure you check for any available programs or grants, as well as any necessary permissions or licenses. It is also recommended to get expert assistance if you do not have prior experience splicing or installing sections of pipe in order to prevent making costly blunders.

Choosing a Clean Out Type

The first and most important step before starting any work is to choose the sort of sewer clean out you will be using. There are three alternatives accessible at the present time: Double Clean Out– The double clean out is the most common type of clean out used in contemporary installations. It contains two shafts that link to the lateral pipe in a ‘U’ configuration, making it the most common type of clean out used in modern installations. The cap that is closest to your home allows for simple access to the city end of the lateral, but the cap that is closest to the street allows you to preserve the house end of the lateral (see illustration).

Despite its T design, the test tee clean out provides access to both ends of the lateral, but it can be difficult to use for clearing obstructions owing to a 90 degree angle at the intersection.

Excavation and Installation

A segment of pipe will need to be excavated in order to find your lateral line. This can be accomplished using either conventional hand tools or leased equipment, with caution to avoid damaging the lateral pipe. As soon as you have completely exposed the required area of the pipe, you should measure out the length of pipe that will be removed. The type of cutting equipment you’ll need will depend on the material that your lateral pipe is constructed of. Once the undesirable portion has been removed, you will be able to measure, cut, and install the new junction section in its place.

Most of the time, it’s advisable to put a container box around the top to keep it from being overgrown or buried too quickly.

Professional Cleaning Cost with a Sewer Clean Out

A portion of pipe will need to be excavated in order to identify your lateral. If you are using ordinary tools or rented equipment, be careful not to damage the lateral pipe while performing this task! It is necessary to measure out the piece that will be removed from the pipe once you have fully exposed the required area of it. It will depend on the material of your lateral pipe as to the cutting equipment you will require. Once the undesirable part has been removed, you will be able to measure, cut, and install the new junction section as you see fit.

Most of the time, it’s recommended to put a container box around the cap to keep it from being overgrown or buried too soon.

where is my septic cleanout?

Everything else that goes into a septic system, aside from waste water, should be contained within the tank itself. That is precisely what the tank is for. Sand and other heavy particles will sink to the bottom of the container, while sludge, grease, and other substances will float to the top. All of these “solids” should be removed at least once every five years, if not more frequently. It is recommended that the waste water only be discharged from the tank into a small distribution box and then to all of the perforated drainfield lines in the system.

A simple system in this location consists of a 1,000-gallon tank, a d-box, and 210 feet of drainfield line for up to three or four bedrooms.
The soil type and usage decide how much additional drainfield length is required.
If they were coming from a tank, the stench coming from a tank would be substantially greater than the stink coming from the other end of a drainfield line.

Mike

COMMON PROBLEMS — JT’s SEPTIC

You should examine the sewer cleanout on the exterior of the home if you are hearing gurgling and all of the house fixtures are clogged. This is often a black 3-4 in color “inch ABS pipe with a threaded cap is available. Remove the cap (WARNING: BE CAREFUL! (WARNING: IT MAY CONTAIN SOME PRESSURE!) : Assuming the sewage line is completely dry, you will have a clog inside the home plumbing, directly in front of the cleanout valve. Make a phone call to a plumber and have them rooter the line. Sewer line cameras are available from several rooter/plumbing businesses.

You have two options at this point: call your preferred septic provider or pull up the tank lids yourself and check the water level and solids content in the tank yourself.

Most tanks erected after January 2001 include a filter that has to be cleaned at least once a year (we clean filters—please call us).

We’ll even notify you once a year when it’s time to clean your filters!).

You should contact your favorite plumber if only one or two fixtures are clogged (for example, one toilet or a specific sink or shower). It’s likely that you have a blockage in your sewage system. In the event that your septic tank is backing up, we can assist you!

GURGLES

You should examine the sewer cleanout on the exterior of the home if you hear gurgling and all of your house fixtures are clogged up. Most of the time, this is a black 3 or 4 “The pipe is made of ABS and has a threaded end cap. Removing the cap (WARNING: BE CAREFUL! IS IT POSSIBLE THAT IT WILL CONTAIN PRESSURE?) : Assuming the sewage line is completely dry, you will have a clog within the home plumbing, directly in front of the cleanout. In order to have the line rooter, contact a plumber. sewer line cameras are available from some rooter/plumbing businesses.

You have two options at this point: call your preferred septic provider or dig up the tank lids yourself and examine the water level and solids content within the tank yourself.
The vast majority of tanks erected after January 2001 feature a filter that has to be cleaned at least once every year (we clean filters— To schedule a filter cleaning, please contact us right away.

A blockage in the sewage pipe is most likely the source of your problem.
Contact us now!

ODORS

If you are experiencing unpleasant odors within your home, such as rotten eggs, it is likely that a trap or vent inside your home is not venting correctly. Call your plumber right away since these gases are harmful to both people and animals!

ODORS OUTSIDE IN THE YARD

At times, the smells emanating from the roof vents will seep into the yard due to meteorological conditions. Make use of a plumber to elevate the roof vents and/or to place a charcoal filter in the vents, as needed. It’s important to remember that your septic tank is vented via the roof.

SURFACING IN THE YARD

The smells from the roof vents can sometimes be carried down into the yard by the wind. Engage the services of a plumber to elevate the roof vents and/or install a charcoal filter in the roof vents. Keep in mind that your septic tank’s exhaust is vented through the ceiling.

HEAVY SOLIDS- OVERDUE FOR PUMPING

Contrary to common perception, you DO need to have your septic tank pumped on a regular basis. Pumping maintenance should be performed on a regular basis, otherwise your system will get overwhelmed with solid waste and eventually cause damage to your leach lines. DON’T MAKE THIS HAPPEN TO YOU! This is an extreme example of a tank that is overflowing. There is sewage flowing from the tank access holes and into the yard!

grease build up in sewer pipes

Fats and grease should never be flushed down the toilet or sink. They have the potential to harden the lines and cause failure; they have the potential to generate an excessive buildup of the floating scum layer in the septic tank; and they have the potential to go into the disposal regions and adjacent soils and completely block the system off.

A shattered lid can pose a serious threat to both animals and children. It is conceivable that they will fall through the cracked or broken lids and will not be noticed until it is too late to save themselves. Please get in touch with us if you need to replace your lids.

crushed or settled pipe

This is the second most prevalent problem we notice in septic systems that are less than 10 years old. In addition to blocking flow, loose fill soil surrounding the tank is causing a backup into the house since it is pulling the pipe with it as it settles. We have even observed instances when contractors installing new systems do not correctly pack the fill earth below the pipe, resulting in pipe settlement on systems that have not been utilized or have only been used for a short length of time (see below for an example).

SEWER OUTLET PROGRESSION

When it comes to modern septic systems, this is the second most prevalent issue we see. Eventually, when the loose fill material surrounding the tank settles, it drags the pipe with it, causing flow to get impeded and backups into the home to occur. We’ve even seen instances when contractors installing new systems fail to correctly pack the fill earth below the pipe, resulting in pipe settlement on systems that haven’t even been utilized or have only been used for a brief time (see below for an example).

examples of settled sewer pipes:

INSTALLATION OF A TANK AND/OR REPAIR OF SEWER PIPESTHE “POLY” PIPEIMAGES BELOW PROVIDE AN EXAMPLE OF WHAT PIPENOTTO USES WHEN INSTALLING A TANK AND/OR REPAIR OF SEWER PIPES However, despite the fact that this grade of sewer pipe is less expensive at the time of purchase, it might end up costing you a lot of money in the long run!

settled inlet sewer pipe on unused system:

Even if the septic system has not been utilized in some time, it is conceivable that problems will be discovered during the inspection process. Pipes might settle on unoccupied ground and in yards as a result of faulty installation and/or automobiles and/or ATVs running over the pipes without realizing they are there. It may be beneficial to all parties to have a skilled inspector take a look at the system and diagnose any concerns, even though the County does not require an examination on an underused system before transferring ownership.

Roots growing in and around the septic tank:

In addition to disrupting the system by clogging or destroying drainage and distribution lines, tree roots can also enter the tank, causing it to leak. Foul odors, poor drainage, and patches of vegetation in the leach field are just a few of the signs that you may have a root problem.

ERODED BAFFLES

Solids are kept in the septic tank and away from the disposal area with the use of concrete baffles. Using baffles to reduce agitation of wastewater entering the septic tank and prevent particles from escaping the tank and entering the drainfield, baffles can assist avoid drainfield damage and extend the life of the drainfield.

If the baffles are broken, missing, or have never been placed, the drainfield’s life expectancy will be reduced significantly. Baffle repair normally entails the placement of a plastic tee at the end of the sewer pipes to prevent them from clogging.

orangeburg sewer pipes

Orangeburg pipe was made in Orangeburg, New York, from 1860 to 1970, and was utilized to plumb numerous septic and wastewater systems throughout Yavapai County during that time period. Orangeburg pipe is produced from rolled tar paper (wood pulp that has been sealed with hot pitch) and was considered a low-cost alternative to metal, particularly after World War II, because of its flexibility and durability. In fact, the pipe itself is so soft that professionals might cut it with a knife during the installation process!

Orangeburg, on the other hand, is known for degrading over time (it has a 50-year lifespan at the most) and deforming when subjected to pressure.

If the septic system is approved, Orangeburg will normally be stated on the permits as the material for the inlet and/or outflow pipe material, respectively.

FAQs — JT’s SEPTIC

Make sure to contact JT’s Septic as soon as possible! It is possible for us to assist you in diagnosing the problem and determining if it is a plumbing issue or a problem directly connected to your septic system. Wastewater backing up into more than one household fixture (even during dry weather), pooling water or muddy soil around your septic system or in your basement are all signs that your system needs to be checked. If you notice any of the following, contact us to have it checked: a strong odor around the septic tank and/or drainfield

Should I Use Septic Tank Additives?

According to current research, there is no clear proof that these items can prevent septic system failure or that they will improve system function. The addition of compounds to a septic tank will not eliminate the necessity for routine tank cleaning. Septic tank cleansers, rejuvenators, and primers that are promoted as such will not hurt your system, but they will not benefit it either. However, there is already a large amount of bacteria in the tank that will break down waste products, so using enzymes or yeast would not hurt your system at all.

Septic system additives should be avoided, according to the North Dakota State University Agriculture Communication.

-Tank Refueling Station

what are the PVC pipes sticking up in my yard?

Septic tank cleanouts are typically located between the house and the septic tank, and they are used to snake the inlet line from the house to the tank. If the PVC markers are labeled with “JT’s Septic,” they indicate that they are marking the access lids to your septic tank (buried directly under the labels). Alternatively, if the pipes are further away and appear to be arbitrarily arranged in relation to the house or tank, it is possible that they are inspection ports used to check the amount of liquid in the disposal area.

Visit ourCOMPONENTSpage for additional information on the various components of a sewage treatment system.

will household cleaning products harm my system?

The majority of specialists believe that the usual use of household cleaning solutions will not harm the system since it will not prevent the activity of bacteria in the tank from taking place as intended. A large amount of some chemicals, on the other hand, may interfere with the breakdown of wastes in the tank or cause the soil treatment area to get clogged. Please remember that the goods you use may ultimately make their way into the groundwater systems in your community.

How Often Should I Pump My Septic Tank?

Most tanks require pumping every 3-5 years, depending on the size of the tank, the amount of wastewater that flows into the tank on a daily basis, and whether or not the tank is equipped with a trash disposal. The state of Arizona currently does not have any laws requiring maintenance and inspection (with the exception of those pertaining to the sale of a home), but the Environmental Protection Agency and local health departments strongly recommend routine maintenance to help prevent groundwater contamination due to nitrogen, phosphorus, and disease-causing bacteria that can be found in wastewater.

I just had my tank pumped and it already looks full!?!

There is a distinction between being full and being overfull! An empty septic tank will fill up as quickly as you use up the quantity of gallons it can contain in terms of water use. The tank is designed to maintain a liquid level at or near the bottom of the outflow pipe at all times. (that exits into the disposal area). When you look down into your tank, it should appear to be completely filled. It is necessary to hire an expert to assess the quantity of scum and sludge in your tank in order to decide when it is time to pump it out.

Does anyone have to be home to have jt’s pump my septic tank?

We usually advise people to have someone at their house for our service, but it is not mandatory. Our service technicians are quick and fast when it comes to finding and pumping out a problem. We enjoy having a homeowner and/or a Realtor on site for our inspections so that they may discuss any concerns that we may discover. If we happen to miss you during our service, we are more than pleased to accept a credit card payment over the phone.

Does JT’s Septic do leach line work?

At this time, JT’s does not install or do any work on leach lines or disposal locations. We do minor repairs on septic tanks, as well as on the inlet and outlet sewer lines. Not sure if we can assist you? Just give us a call!

Why can’t you pump my septic tank out of the sewer cleanouts?

We have found that a tank cannot be efficiently pumped through sewage cleanouts because the pumps on our trucks are just too powerful, and there is no way to get all of the scum and debris out of the tank through a cleanout. It is advised that the tank access lids be used in order to remove all liquid and particles from the tank and to examine the baffles. To empty the tank completely, we unlock all compartments and use a pump to remove the full contents of it. The fact that you do not pump via the primary access holes in the tank itself is a disservice to yourself and your system.

how do you know the size of my tank?

Our experts and inspectors can identify the size of the tank based on the form of the tank; tanks for a normal residence are generally 1,000 or 1,250 gallons in capacity, respectively (tanks may be smaller or larger depending on bedroom count, style of tank, etc).

Our trucks are outfitted with clear sight glasses, allowing our specialists to keep track of the number of gallons they are extracting from your tank. Our specialists are also trained to measure the tank measurements on the job site in order to establish the approximate gallon capacity.

why do you recommend routine maintenance and frequent pump outs when I’ve not a had a problem in the last 10 years and I’ve never had my tank pumped?

Even while many homeowners are able to go several years over the suggested maintenance time without experiencing any problems, harm is gradually being done. Solids that are insoluble in water and cannot be broken down by natural microbes are stored in the tank. This builds up over time until the tank no longer has enough space to hold everything. As a result, the solids make their way to the drain field where they fill up the pores in the earth, causing poor drainage and, eventually, the failure of the septic system and drainfield.

How long will my septic system last?

All septic systems have a defined life span, which means they will ultimately cease to function. The length of time a system will survive is determined by the system’s size, installation, soil composition, the water table, neighboring trees and roots, the amount of usage and abuse, and, most crucially, the frequency with which it is maintained and pumped.

if I have a garbage disposal Can i use it?

Yes! It is OK to use the garbage disposal for a limited amount of time, such as for food crumbs that remain after doing the dishes. Pump outs will be more frequent if the disposal is used more frequently, which will result in higher costs. The usage of a trash disposal can have a negative impact on your septic system by increasing the quantity of suspended particles that enter the system. Soil treatment areas can get clogged with suspended particles, which reduces the soil’s ability to remove waste.

CAN I FLUSH WET WIPESFEMININE HYGIENE PRODUCTS?

No! The presence of this problem is one of the most prevalent we see in tanks. Wipes and/or feminine hygiene items block sewer pipes and do not decompose properly in the holding tank, causing backups.

how often can i do laundry?

It is critical not to overburden your computer system. Instead of completing a large number of loads in a single day, try to spread them out over the course of a week. Doing no more than two loads of laundry every day – one in the morning and one in the evening – is advised.

Can I have a water softener system with a septic system?

It is unlikely that a water softener will cause damage to most septic systems, albeit they may necessitate the installation of a somewhat bigger tank disposal area.

Can We Drive Over Our Leach Field?

Neither driving on the leach field nor on the entrance and exit sewer pipes, nor on the septic tank, is suggested by the manufacturer. It is possible to restrict or slow down efficient evaporation by compacting the soil over the leach lines. Evaporation is a critical component of the drainage and disposal process. It is possible to induce settling and even rupture of sewage pipes by driving over them. It is possible to produce cracks in a tank by driving over it, especially if it is made of fiberglass or plastic.

do i have a septic systeM?

Do you utilize well water in your home? Is there no meter on the water main that leads into your home? Do your water bill or property tax bill display a “$0.00 Sewer Amount Charged” or “$0.00 Sewer Amount Charged”? What about your next-door neighbors? Do they have a septic system? Your home may have a septic system if any of the following questions were answered affirmatively:

How do I find my septic system?

Once you’ve confirmed that you have a septic system, you may identify it by looking at your home’s “as built” drawing, inspecting your yard for lids and manhole covers, or calling us for assistance.

How Far Does The Tank Have To Be Away From The House?

The normal setback distance from the home is 10 feet. Yavapai County is committed to upholding this obligation. Keep these setbacks as they are to allow for easier access and to avoid any potential foundation and moisture concerns.

An alarm is going off in my tank- what do I do?!

The sirens on certain alternative systems alert the homeowner to a possible problem prior to effluent or waste backing up into the house. The alarm may sound to warn a problem with the electrical system or a high quantity of liquid in the tank. A pump or float may be malfunctioning, in which case it is recommended to contact either JT’s or your alternate system maintenance provider for assistance as soon as possible.

Can I Plant A Tree Over My Leach Field?

No. Root invasion from trees is one of the most prevalent problems that affect septic systems today. Certain species of trees are extremely harmful to your septic system and should be avoided at all costs. Please check your local nursery for further information.

does jt’s provide portable storage tanks?

We’re sorry, but we don’t provide portable storage tanks at the present moment.

can jt’s facilitate a pipeline repair?

Yes! We are capable of repairing and replacing sewer inlet and outlet pipes. Our main line sewer camera service may also be used to plan infrastructure maintenance, as well as to aid with any and all forms of repair work. Please contact us if you would like to book a service.

why do you suggest running a sewer camera down my line?

A difficult blockage may necessitate the services of more than one plumber. Pipe obstructions can be caused by a variety of factors, including tree roots, grease, aging pipes, and foreign items. Our power snakes and Ridgid sewer cameras are excellent tools for identifying problems such as the following: Pipes that are broken, cracked, corroded, or collapsed are considered damaged and must be repaired or replaced. A clog is caused by a deposit of grease or a foreign item that prevents the passage of water.

Joints that are leaking—the seals between pipes have failed, enabling liquid to leak through.

How to Clean a Septic Tank

Article in PDF format Article in PDF format Getting your tank filled is something you should prepare for. You may rely on us to assist you with the cleaning procedure! Unless properly maintained, septic tanks can get clogged with solids that are incapable of being broken down by bacteria, which can result in a costly systemic collapse. In order to maintain your tank clean, it is necessary to have frequent inspections and pumps performed on a regular basis. We’ll teach you how to uncover and clean your tank in this post, however you’ll need to hire a professional to pump the trash out.

1 Locate your tank. It is best to begin with the sewage pipe at the lowest level of your home if at all feasible. Follow the path it takes out of the house after it’s out of the house. It’s possible that your tank is buried in the ground. Identifying the tank now will save you time and money later on, regardless of whether you or an inspector clean the tank. 2 Remove the tank’s top by digging it out. It’s possible that your tank is buried underground. Take a shovel and clear away the dirt from around the top of the tank before the examination begins. Your tank will have an access port lid, which should be sturdy and well-secured when closed.

Risers can be placed on top of the tank for increased stability. These assist you in locating and gaining access to the tank without the need to dig. These can be added by septic system pumpers.

Advertisement
s3 Cracks should be checked on the tank. Damaged areas should be checked all the way around the tank, including the inside. Cracks must be fixed by a professional once the tank has been pumped in order to prevent the system from failing. Keep an eye out for any corroded or damaged sections on the inlet and outlet pipes that are necessary for drainage. If your tank is equipped with a distribution box or a pump chamber, make sure everything is in working order.

In order to determine whether or not water from your home, such as from the toilet or washing machine, makes it into your tank and subsequently drains effectively, it is helpful to run some water from your home.

1Make a slit in a pipe. Begin with a ten foot (3 m) length of PVC pipe. Separate it into two sections: a six inch (15.24 cm) segment and a nine and a half foot (2.9 m) section, using a saw or PVC cutter
2 Glue the pipes together as a group. PVC cement should be poured into the elbow joint. Using the cement and joint, attach the smaller pipe to the top of the bigger pipe. A straight pipe will protrude straight to the right or left in a “L” configuration
3cap both ends of the pipe. PVC caps may be purchased at the same hardware shop where you purchased the pipes, cement, and cutters. 4 Attach the caps to the pipes so that they are tight and prevent water from flowing through them. Insert the stick into the hole as far as it will go. Assemble the scum stick by holding it in a “L” form with the smaller pipe at the bottom and facing out to one side. Reduce the pipe’s diameter until it can be held against the top layer of septic tank waste without breaking through

5 lowering the pipe Make a mark on the stick. Make a mark on the scum’s top point with a marker or a piece of masking tape. When the pipe is resting on top of the scum layer, make a mark at the point where the pipe spans from the ground to the very top of your tank
6Push through the scum layer until the mark is no longer visible. Push the stick all the way through the muck. Some people find it necessary to twirl the stick so that the pointed end bursts through. When you get to the bottom of the scum layer, you’ll see that the stick is traveling through water rather than through the resistive fat and oil layer. Continue to hold the stick against the bottom of the scum in the same manner as you held it against the top of the scum, keeping the smaller pipe flat and off to the side so that the stick takes on the shape of a “L”
7 Make a second mark on the stick. Once again, a marker or tape should be used to designate where the scum layer terminates. Make a note at the point where the pipe crosses the ground and enters the tank’s very top

Eight Measure the distance between the markers. Carefully remove the stick and place it on a tarp to catch any drips. Make a note of the distance between the two marks you created and use a tape measure to measure it. This represents the depth of the scum level. When the fat and oil layer reaches barely three inches (7.62 cm) above the bottom of the exit pipe, the tank must be pumped to remove the remaining liquid. Advertisement

1Make a slit in a pipe. Partition a ten-foot (3-meter) length of PVC pipe into five-foot (1.5-meter) portions. This allows you to make a stable two-part stick
s2Glue the pipes together. Connect the two pipes together using a straight adaptor or a threaded coupler from the hardware shop, as shown. PVC cement should be used to secure the ends in the connection
3cap each end. PVC caps are also available at your local hardware shop. Put one on either end of your stick and twist them together. It should be tightened so that no sewage may enter the pipe
4 Wrap a piece of white cloth around one end of the stick. A white cloth, towel, sock, or Velcro can be used to make a mark on the sludge to indicate the level of the sludge. Wrap the material around one end of the pipe for up to three feet (.91 m) or the whole length of the pipe, whichever is shorter. 5Push the stick through the scum hole after securing the material with the Velcro backing, tape, or string. You can drill a hole in the top layer of the tank with a stick designed for testing its scum depth if you haven’t previously done so. Then drop the sludge stick through the opening until you feel it hit the bottom of the tank
6remain in position for three minutes while you do this again. Allow for a minimum of three minutes of resting time on the stick. The longer you keep the stick in your hand, the more likely it is that the sludge will stain your white material
7Remove the stick from your hand. Continue to bring the stick back up, keeping it steady as you pull it up through the hole you formed earlier in the process. You will not discolor the stick as long as you do not move it. Prepare the stain by spreading it out on the ground where it will not be ruined and where you will be able to wipe the stick afterwards
8Measure the stain. Make a note of the length of the stain starting from the bottom of the stick with a tape measure. In order to prevent the sludge or scum from occupying more than one third of the tank’s depth (approximately 12 inches or 30.48 cm high), the tank must be pumped. It is necessary to pump the tank if the sludge layer is within six inches (15.24 centimeters) of the bottom of the output pipes. Advertisement

Create a pipe by cutting it at an angle. Partition a ten-foot (3-meter) length of PVC pipe into five-foot (1.5-meter) segments. In order to construct a secure two-part stick, glue the pipes together as shown in the diagram. Using a straight adapter or a threaded coupler from the hardware store, connect the two pipes together. Apply PVC cement to the ends and then cap each end with a plastic cap. Also available at the local hardware shop are PVC caps. Put one on either end of your stick and hold them together. It should be tightened so that no sewage may enter the pipe. Close off one end with a white piece of cloth. An absorbent white cloth or towel, a sock, or Velcro can be used to make a mark on the sludge to indicate the depth of the sludge. Cover only one end of the pipe and wrap the material around it for up to three feet (.91 m) throughout its whole length, starting at one end. 5Put the stick through the scum hole and secure the material with the Velcro backing, tape, or string
In case you haven’t previously, punch a hole in the top layer of the tank with a stick designed for testing scum depth. Then drop the sludge stick through the opening until you feel it hit the bottom of the tank
6remain in place for three minutes while you complete this step again. Allow for a minimum of three minutes of resting time for the stick. The longer you keep the stick in your hand, the more likely it is that the sludge will stain your white material
7Remove the stick from the material. Continue to bring the stick back up, keeping it stable as you pull it up through the hole you created before. You won’t discolor the stick as long as you don’t move it around. Prepare the stain by spreading it out on the ground where it will not be ruined and where you will be able to wipe the stick afterwards. The length of the stain measured from its base to its tip should be noted with a tape measure. The tank must be pumped when the sludge or sludge with scum fills about one-third of the tank’s depth (around 12 inches or 30.48 cm high). It is necessary to pump the tank if the sludge layer is less than six inches (15.24 cm) above the bottom of the output pipes. Advertisement

2Remove the filters from the machine. Put on a pair of rubber gloves for protection. Reach inside the outlet baffle using your hands, a rake, or a hoe to remove the obstruction. Take the filter out of the machine. Even though it may be brightly colored and have a handle on the end, if your tank has one, it will be located inside the outflow baffle. 3Rinse the filter thoroughly. Holding the filter over the intake side of the septic tank and spraying it with a hose or dipping it in a pail of water are both options. Check to see that all of the solids have fallen back into the tank or bucket. Fill the tank with any waste that has accumulated once you have done rinsing
Inspect the filter for signs of wear and tear. Examine the filter for any cracks or particles that may be obstructing it. When the filter is not cleaned on a regular basis, it becomes clogged and ceases to function. It is recommended that you replace the filter if it is not cleanable or looks to be damaged. Looking around the edges of the filter is important whether you are putting the old filter back in or installing a new one. It’s possible that the filter has an arrow on it. Ensure that the filter is correctly installed so that the arrow points downwards into the drainage system. When the filter is securely seated in the baffle, replace the tank’s lid with a firm grip. Advertisement

1 Pump the tank once every several years or as needed. Many individuals make the mistake of assuming that the tank does not require treatment as long as the piping looks to be in working order. It is possible to save thousands of dollars in costly repairs by doing regular maintenance on your tank before sludge builds up and liquid drains cease to flow. Every one to three years, or whenever the sludge and scum levels have occupied approximately one-third of the tank’s volume or have approached the exit pipe, this should be performed.

The smaller the tank or the greater the number of people served by the tank, the more frequently it will need to be cleaned. A 750-gallon tank, which is normal in a two-bedroom home, will sustain two people for around four years if they do not pump it. With just four inhabitants, it will survive less than two years without pumping
Annual treatment will maintain the tank clean and allow any issues to be addressed before they become catastrophic septic failures at a cost of a couple hundred dollars
And

2Clean up the garbage. Pumping is accomplished by the use of a cast-iron pump that can be turned on and off. The pump takes out the particles that are unable to be broken down by bacteria and transports them to a holding container, such as the inside of a tanker. If you remove the sludge and scum, there is no need to add bacteria or water into the system. Waste disposal for septic tanks. Even if you attempt to pump out the tank on your own, you must dispose of the trash in accordance with local regulations. The trash must be transferred by tanker to a place determined by the government that is distant from water and locations where people congregate. As a result, it is preferable to leave it in the hands of a specialist. Advertisement

Create a new question

Question For what reason is it risky to clean up a septic tank? David Balkan is a licensed professional plumber who also serves as the CEO of Balkan Sewer and Water Main Service and the President of Balkan Sewer and Drain Cleaning, among other positions. With over 40 years of experience as an active owner of these businesses, David is well-versed in the challenges that arise with water service lines, sewers, and drain lines. David has served on the Executive Committee of the Sub Surface Plumbers Association of New York for more than 30 years and is now the Chairman of the Master Plumbers Council’s Committee on Plumbing. As a result of his expertise and solution-oriented approach, Balkan Sewer and Water Main Service has grown to become the biggest and most trusted sewer and water main service in New York City, and the recipient of the 2017 Angie’s List Super Service Award. Answer from a Professional PlumberExpert Sewer gas, which is prevalent in septic systems, has the potential to be lethal. It’s a quiet murderer that kills in a matter of minutes, therefore I strongly warn homeowners never to attempt to repair their own septic system. Employ the services of a professional to ensure your safety.

Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement

Every one to three years, have your tank examined and pumped out by a professional. A little amount of money spent on regular maintenance is preferable to dealing with a septic system that isn’t functioning properly. Higher water use, such as when numerous people reside in the house or when you use a hot tub, causes the tank to fill up more quickly. Non-waste items such as baby wipes and grease should not be disposed of. These clog the system and cause it to malfunction.

Children have been seen to fall into tanks. Make certain that the lids are robust and that they are securely fastened. Septic tanks are extremely risky to enter and operate. The wastes in the tank emit very toxic vapors, which fill the tank. Work with a companion and keep a safe distance from the entrance

Things You’ll Need

A shovel, two ten-foot (3-meter) PVC pipes, a PVC cutter or saw, PVC cement, a PVC elbow joint, a PVC connector, and four PVC end caps A white cloth, a sock, or Velcro is recommended. Tarp, measuring tape, hose and bucket, baffle filter, etc.

About This Article

Summary of the ArticleX Maintaining the cleanliness of your septic tank will save you money on costly repairs down the road. Annual filter cleaning and tank pumping are required to keep your septic tank in good working order, but you may save money by doing it yourself. Generally speaking, your filter will be positioned in the tank’s exit baffle and will be brightly colored. Cleaning it is as simple as spraying it with water from the tank or submerging it in a pail of clean water for an hour or so.

The sludge and scum levels in your tank should be pumped out every one to three years, or whenever they reach a third of the total capacity.

Continue reading for additional information, including how to measure the sludge and scum depths in your septic tank. Did you find this overview to be helpful? Thank you to all writers for contributing to this page, which has been read 69,570 times so far.

Did this article help you?

Septic tanks are tanks that are capable of being linked to a home’s plumbing system, as described above. They are frequently employed in rural locations where municipal sewage lines have not been established or are not already in use. Maintaining a clean, functioning septic tank is essential. This may be accomplished by having it pumped on a regular basis. Here’s all you need to know about maintaining the cleanliness of your tank.

Why Do You Need to Clean a Septic Tank?

Whenever you flush a toilet in your house, take a shower, or operate the washing machine, the used water and trash are transferred to your septic tank for proper disposal. In order for liquid to be transported out of the tank and into a drain field, the septic tank must be built in this manner. Waste, on the other hand, sinks to the bottom of the tank and remains there. After a period of time, the waste decomposes into a slimy or sludge-like substance. Pumping the tank eliminates this sludge material, keeping your tank from becoming so backed up that it becomes unable to operate or from overflowing into your backyard.

Can You Clean a Septic Tank Yourself?

Technically, it is possible to clean a septic tank on your own. Professionals, on the other hand, strongly advise against doing so. Cleaning a septic tank is a difficult and time-consuming operation. It takes a lot of effort. Incorrect use of the tank can result in harm to the tank as well as poor waste disposal or failure to remove all of the trash from the tank. There are a variety of reasons why you should employ a professional to clean your septic tank. A expert will be able to find and uncover your tank in a short period of time.

Besides that, a professional has the expertise and skills to remove all of the trash from your tank and dispose of it in an appropriate manner.

How Frequently Does Your Tank Need to Be Cleaned?

It is necessary to get your septic tank pumped on a regular basis in order to maintain it clean. You may be asking how frequently your tank should be pumped as a result of this. There are a variety of factors that influence how frequently your tank has to be pumped, including the tank’s size and location in your home, the number of people who live there, the quantity of waste generated by your household items, and whether or not you utilize enzymes or bacteria in your tank. In light of these considerations, a septic tank specialist may make an estimate of how frequently your tank should be flushed.

How Do You Know When Your Tank Is Due for Cleaning?

Your tank may also give you indications that it is time to get it cleaned in addition to presenting you with an anticipated pumping schedule from a septic specialist. When your tank needs to be pumped, you may notice that water is slowly draining from your house. When taking a shower, you may observe water puddling around your feet or sink water slowly draining away when doing the dishes. The presence of foul odors in your septic tank is another indication that it needs to be flushed. It is possible that scents will be present when your tank is completely full.

Finally, if your tank is overdue for a pumping, it may begin to overflow as a result of the delay.

Make sure you are aware of the location of your tank so that you can keep an eye out for any standing water in the region.

All of your septic tank needs may be met by Al’s Septic Tank Service, which serves the greater Pauline, SC region. We can assist you with anything from cleaning to inspections to maintenance and repairs. To book an appointment, please contact us right away.