How Do I Find If An Address Has A Septic Tank? (Correct answer)

One is your county health department. County health departments often maintain records of septic systems. You can also check to see if there is a property survey map available from your municipality or county. A survey map might contain the location of a septic tank.

How do I Find my septic tank?

• So, how to find a septic tank?. To find the septic tank, first check the septic tank map of your property which will have a diagram, with the location of the tank.

Are septic tank locations public record?

Contact your local health department for public records. These permits should come with a diagram of the location where the septic system is buried. Depending on the age of your septic system, you may be able to find information regarding the location of your septic system by making a public records request.

How do you find a septic tank in an old house?

Look for the 4-inch sewer that exits the crawl space or basement, and locate the same spot outside the home. Septic tanks are usually located between ten to 25 feet away from the home. Insert a thin metal probe into the ground every few feet, until you strike polyethylene, fiberglass or flat concrete.

How do you find a metal detector with a septic tank?

6 Steps to Locate a Septic Tank

1. Find Your Main Sewer Drain Line. Sewage from your toilets, sinks, and showers collects into a main drain line.
2. Check Permits and Public Records.
3. Determine Septic Tank Material.
4. Time to Dig.
5. Mark the Location for Future Maintenance.

What is OWTS?

An Onsite Wastewater Treatment Systems (OWTS) is a privately owned and maintained sewage disposal system. They are commonly referred to as septic systems. All OWTS have two basic components: a two-compartment septic tank and a disposal field.

How can I find out if a property is on mains drainage?

One way to find out if your property has surface water drainage is checking your property’s Title Deeds (you can do this through Gov), or looking at your original Planning Application.

How far is septic tank from house?

Septic tanks are required to be at least 5 feet from the house, although most are between 10 and 25 feet away.

Are septic tanks metal?

Steel Septic Tank—Steel septic tanks are the least durable and least popular tank option. Designed to last no more than 20-25 years, they can be susceptible to rust even before that. Steel top covers can rust through and cause an unsuspecting person to fall into the tank.

Can you use a metal detector to find sewer lines?

Using a Plumbing Pipe Detector to Locate Underground Pipes. As a property owner there will be times when, for a variety of reasons, you will need to locate underground metal objects. For example, using a pipe locator metal detector you can easily pinpoint leaking underground pipes quickly.

Are septic tanks made of metal?

The majority of septic tanks are constructed out of concrete, fiberglass, polyethylene or coated steel. Typically, septic tanks with a capacity smaller than 6,000 gallons are pre-manufactured. Larger septic tanks are constructed in place or assembled on-site from pre-manufactured sections.

Can you have a septic tank without a leach field?

The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.

Do I have to change my septic tank?

Under the new rules, if you have a specific septic tank that discharges to surface water (river, stream, ditch, etc.) you are required to upgrade or replace your septic tank treatment system to a full sewage treatment plant by 2020, or when you sell a property, if it’s prior to this date.

What does septic on site mean?

Overview: Onsite Wastewater Treatment Systems (OWTS), also known as septic systems, are used to treat wastewater that is contaminated by human use, from a home or business, and then released into the environment.

How Do I Know if My Property Has a Septic or a Sewer?

It takes years between septic tank pumpings for the tank to fill to its maximum capacity. When a family of four uses the typical amount of water, it will fill a septic tank to its operating capacity of 1000 – 1500 gallons in about a week and a half.

Step 1

Make a thorough inspection of your property. If you live in a mobile home, certain septic tanks are simple to recognize since they are accompanied by a massive lump of soil that is either rectangular or cylindrical in shape and covers the drain field. If you can plainly see a single, unnatural-looking hill quite near to your property, it is likely that a septic tank is located on that hill.

Step 2

Take into consideration the location of your house. Sewer systems are not inexpensive, and the neighborhood must have a sufficient number of dwellings to fund the system’s ongoing upkeep. If you live in a development or a crowded area, you are almost certainly connected to a sewage system. Having a septic system is more likely if your house is the only one or one of a few in a rural region where each property is many acres and you are the only one who has one.

Step 3

It’s important to think about where you want to live. Sewer systems are not inexpensive, and the region must have a sufficient number of dwellings to finance the system’s upkeep and expansion. In most subdivisions and bustling neighborhoods, you are most likely connected to a sewage network. If yours is the lone house or one of a small group of homes in a rural location where each property consists of many acres, you are more likely to have a septic system installed on your property.

Step 4

Obtain a copy of the records pertaining to your property from the local municipal government office. Whether your home has a septic tank or has ever had a septic tank may be determined by looking at the plans, building permits, and property documents for the project.

How to Know If You Have a Septic System

Local health agencies in certain jurisdictions keep records of each property’s septic tank information, including the date of installation, maps, capacity, and inspection dates and conclusions, among other things, on file. In your house, you may not give much thought to what occurs after you flush the toilet, and this is understandable. Whatever your location, it is critical to understand the type of waste system you have on your property, whether it is an independent septic system or a link to the local sewer system.

Step 1

Consider the environment in which you live. The physical location of your property is the most important thing to consider when determining whether or not you have a septic system. A majority of the time, if you reside in a city, town, or subdivision, your home’s waste system is connected to a sewer system that goes through the neighborhood and into a network of pipes that leads to a sewage treatment plan.

It is likely that you have a septic system if you live in a rural region, especially if there is a substantial distance between you and your neighbors.

Step 2

As you go around your yard, keep an eye out for a significant bump in the grass on one side of your home. A domed region under the grass indicates the presence of a septic system. The amount of the bulge will vary depending on the size of your home and the number of toilets you have, but it will most likely be visible. Don’t look for a steep incline; the bump may simply rise one foot above the surrounding ground.

Step 3

Keep an eye out for sewage access ports or manholes all along your street’s length. A sewage system, rather than a septic tank, is clearly indicated by the presence of these indicators.

Step 4

Call the land-related branch of your local government, such as the register office or the assessment bureau at the municipal level, for more information. An office clerk can tell you the characteristics of your property if you supply them with your name, address, and other information about the location of your property.

Step 5

To find out more about your property, contact a registered real estate agent. A real estate agent can frequently search up your property in a database and inform you whether or not you are connected to a sewer system or have a septic tank on your property.

Step 6

Attempt to find out if your street is known to have septic systems by calling a septic pumping business in your region and asking them. Septic pumping services may have been utilized by the previous owner of your house or a neighbor who has a septic system. Septic pumping services are available in the following areas:

how to find out if a home is connected to a septic tank or to a sewer system

• Send us an email with your question or comment regarding how to determine whether a residence is linked to a public sewer system or a private septic system.

InspectAPedia does not allow any form of conflict of interest. The sponsors, goods, and services described on this website are not affiliated with us in any way. Determine if a facility is linked to a sewer or septic system by following these steps: A property buyer can use this article to identify whether a home or other structure she is considering purchasing is connected to a public sewage line or a private septic system by following the steps outlined in the article. In response to a reader’s question, “How can I determine whether or not the house I am acquiring has a septic tank?” It is common that the answer to this question is well-known, recorded, and everyone is sure in their understanding of what happened.

For this topic, we also have anARTICLE INDEX available, or you may check the top or bottom of the page.

How to Determine If a Building Is Connected to a Private Septic Tank or a Public Community Sewer System

It is possible that failing to connect an older building to a sewer line will result in some unpleasant surprises, such as unexpected costs to repair an old septic system, additional costs to connect the building with a new sewer line, and even serious life safety risks in the event that an old septic tank is at risk of collapsing. An inspector and contractor in New Paltz, New York, named Steve Vermilye recently found that an office building that had been linked to the New Paltz sewage system for decades was really connected to an ancient cesspool in the property’s backyard, contrary to what everyone had assumed.

That issue was uncovered during new construction, fortunately before anyone was injured in a fall into the sewage system.

Article Series Contents

• What questions should you ask about sewers or septic tanks
• CLUES INDICATING THE PRESENCE OF A SEWER LINE
• CLUES INDICATING THE PRESENCE OF A SEWER LINE THAT IS CONNECTED TO A SEWER
• GUIDE FOR BUILDINGS CONNECTED TO PUBLIC SEWER
• GUIDE FOR BUILDINGS PRE-DATING SEWER INSTALLATION
• GUIDE FOR BUILDINGS CONNECTED TO PRIVATE SEPTIC
• GUIDE FOR BUILDINGS CONNECTED TO PUBLIC SEWER
• GUIDE FOR BUILDINGS CONNECTED TO WAITING FOR HELP IF NO ONE KNOWS WHAT TO DO- if the connection is to sewer or septic

• SEPTIC VIDEOS demonstrate how to walk a property in search of potential septic tank and drainfield placements. THESE SEWER / SEPTIC PIPE CAMERAS examine the sewer line from the inside, tracking its condition as well as its length and direction to a terminal point, which may be a public sewer, a septic tank, a cesspool, or a seepage pit
• They may also be used to inspect a septic tank.

The use of septic tanks or other private onsite waste disposal systems to handle sewage and wastewater in communities that are not serviced by a municipal or community sewer system is becoming more common. A substantial portion of sewer systems consists of massive sewer main drains that are routed through the communities that they serve, frequently in the street but occasionally over an easement that crosses many properties. These drains transport sewage and wastewater to a community or municipal sewage treatment facility, which may need the use of one or more pumping stations if the terrain is particularly mountainous.

What Questions toAsk About Public Sewers or Private Septic Systems When Buying a Home, Building, or Property

If a house or other property is being sold, the seller or agent should be able to provide answers to the following questions; but, if he or she is unable to do so, we have a wealth of information on how to obtain these critical answers elsewhere:

1. It is important to know whether there is a municipal sewer system in your community and on your individual street. When there are CLUES indicating the presence of a sewer line, we talk about how to get the answer to this query. Is the facility linked to a public sewage system or does it rely on a private septic system for waste disposal? Consider if every residence on a street is linked to the public sewer main that runs nearby before making your assumption. This question is discussed atCLUES INDICATING CONNECTED TO SEWER, where we explore how to discover the solution.

Five possible outcomes to these questions about sinks, toilets, sewers, and septic tanks:

1. Do not despair if no one appears to know if the building is connected to a public sewer system or a private septic tank and drainfield system. We can still find out the information you want. This is the scenario that we are discussing. at WHAT TO DO IF NO ONE KNOWS IF THE PROBLEM IS WITH THE SEWER OR THE SEPTIC
2. If the facility is connected to a private septic system, a slew of additional essential and comprehensive questions must be answered before construction can begin. Take a look at our full recommendations. Home Buyer’s Guide to the Attic and Septic Systems The book addresses the types of inspections and testing that should be conducted, as well as the importance of septic system maintenance and how to locate septic tanks, distribution boxes, and drainfields. You should still ask some questions if you are told that the building is definitely connected to a public sewer system. If the home is older and may have been built before the sewer system was put in place, you should ask some important questions about safety, whether or not older septic systems are still in use, and other issues. We will talk about the GUIDE FOR BUILDINGS CONNECTED TO PUBLIC SEWER SYSTEMS. in which we deal with the situations of both newer and older residences, each of which has a separate set of worries regarding connecting to a public sewage system
3. A building may be linked to both public sewer and privately owned onsite septic systems. It may seem strange, but some older buildings that have been connected to a public sewer system may still have old laundry sinks that are connected to a drywell, or even a bathroom that is still connected to a septic tank or cesspool, despite the fact that the building has been connected to the public sewer system. GUIDE FOR BUILDINGS PRE-DATING SEWER INSTALLATION explains how to figure this out. A building may have no waste piping system, or perhaps a minimal waste piping system, or none at all. The number of occurrences in which a building has self-contained or waterless systems for washing or toilets decreases significantly when we eliminate structures that are immediately evident as having no plumbing at all. You’ll most likely notice this as soon as someone wants to use the restroom or simply wash a dish in your presence. However, it is not as strange as you would think. Some buildings, for example, may employ self-contained, extremely limited-capacity waterless or low-water toilets, while others may employ graywater systems, which recycle and re-use a significant portion of their wastewater. We will go through these systemsatSEPTIC DESIGN ALTERNATIVES in detail.

What Does It Mean If No Public Sewer Line is Available at a Property?

It is not possible to connect a house to a sewage system if there is no sewer system existent, and it is necessary to have a local septic system in place. It is feasible to handle building sewage and wastewater on-site in a safe and sanitary manner, so don’t be concerned about it. Septic and wastewater treatment systems installed on private property in the United States and many other nations service millions of private residences each year. See some fundamental considerations when purchasing a property with a septic tank at Allowable uses of this content include making a reference to this website and providing a brief quotation for the sole purpose of review.

Technical reviewers are encouraged to participate and are noted under “References.”

Reader CommentsQ A

Sandy: Either someone is speaking without paying attention to their word choice and they are talking to a building that is linked to a public sewer system, or they are referring to a building that is not connected to a public sewer system. There are some projects, such as tiny clusters of dwellings, where it may be necessary to establish a private onsite sewer system, which is sometimes known as a “shared septic system.” The sewage and other wastewater from your home will be sent to a septic system or wastewater treatment system that is accessible to the general public or the neighborhood.

• What does it indicate when a house is equipped with a Public Septic System?
• As well as this, see 3725 Longview Road has a number of clues that a sewer line is in the area.
• Is it connected to the city’s sewage treatment system?
• Is there a septic tank at 3 Cline Drive in Granite Falls, North Carolina 28630?
• My toilet is clogging up and won’t stop.
• Thanks, I mowed today to the point where I could see into the lagoon; the water appears to be clear, but there is a lot of duckweed floating on the surface.
• I have someone scheduled to come out to look at the well; I will have to check whether he is able to look at the lagoon or knows someone who is able to look at the lagoon.

Linda I would not draw any conclusions about the operation of the onsite septic system or its safety based on the results of the test you describe.

Septic lagoons require regular maintenance and cleaning; for more information, visit InspectApedia.com and search for SEPTIC LAGOON.

Hello, we recently purchased a property that was formerly used as a service station and motor court along historic Route 66.

The site of a mobile house that was there around 7 years ago has been revealed to us by the neighbors.

We pumped water from the well into a drain in the floor of the old garage overnight, and there was no back-up of water.

I also wonder if there was a septic system near to where the trailer had previously been parked, but no one seems to know.

Is it really worth our time to hunt for it?

(parallel to the back of where the trailer was).

And if I come upon something, should I contact a psychic? Continue reading at this website. Choose a topic from the closely-related articles listed below, or browse the entireARTICLE INDEX for more information. CLUES INDICATING A SEWER LINE IS PRESENT Alternatively, consider the following:

Recommended Articles

• DIAGNOSIS OF A BLOCKED DRAIN
• HOW TO FIND THE Position OF THE SEPTIC TANK- how to find the location of the septic tank, if there is one
• DO YOU WANT A SEPTIC OR A SEWER CONNECTION? – the topic’s starting point

• What questions should you ask about sewers or septic tanks
• CLUES INDICATING THE PRESENCE OF A SEWER LINE
• CLUES INDICATING THE PRESENCE OF A SEWER LINE THAT IS CONNECTED TO A SEWER
• GUIDE FOR BUILDINGS CONNECTED TO PUBLIC SEWER
• GUIDE FOR BUILDINGS PRE-DATING SEWER INSTALLATION
• GUIDE FOR BUILDINGS CONNECTED TO PRIVATE SEPTIC
• GUIDE FOR BUILDINGS CONNECTED TO PUBLIC SEWER
• GUIDE FOR BUILDINGS CONNECTED TO WAITING FOR HELP IF NO ONE KNOWS WHAT TO DO- if the connection is to sewer or septic

• SEPTIC VIDEOS demonstrate how to walk a property in search of potential septic tank and drainfield placements. CAMERAS FOR SEWER AND SEPTIC PIPE

Suggested citation for this web page

DO YOU WANT A SEPTIC OR A SEWER CONNECTION? Building environmental inspection, testing, diagnosis, repair, and issue preventive guidance are all available online atInspect A pedia.com- an online encyclopedia of building and environmental inspection. Alternatively, have a look at this.

INDEX to RELATED ARTICLES:ARTICLE INDEX to SEPTIC SYSTEMS

Alternatives include asking a question or searching InspectApedia using the SEARCH BOXfound below.

Ask a Question or Search InspectApedia

We encourage you to use the search box just below, or if you prefer, you may make a question or remark in theCommentsbox below and we will get back to you as soon as possible. InspectApedia is a website that allows you to search for things. Please keep in mind that the publication of your remark below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link. Your submission will appear when it has been reviewed by a moderator. We sincerely apologize for the inconvenience.

Technical ReviewersReferences

Citations can be shown or hidden by selecting Show or Hide Citations. InspectApedia.com is a publisher that provides references. Daniel Friedman is an American journalist and author.

How To Find Septic Tank Location: A Guide for Property Owners

The majority of individuals prefer to relax on their back patio or porch and take in the scenery rather than worrying about where their septic tank could be. When you know exactly where your septic tank is, it will be much easier to schedule routine sewer line cleanouts and repair appointments. Continue reading to find out more about how to locate your septic tank.

Follow the Main Sewer Line

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your property. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about down there. Look for a pipe with a diameter of approximately four inches that is leading away from your home or building. Keep a note of the position of the sewer pipe and the point at which the line exits your home so that you can locate it outdoors.

If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your home.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may have to probe a bit further out before striking the tank.

Inspect Your Property

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your yard. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about in it. Look for a pipe with a diameter of around four inches that is leading away from your home or business. Recall where your sewer pipe is located, as well as where it exits your home, in order to locate it while you are out in the field.

If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your house.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may need to probe a bit further out before striking the tank.

• Paved surfaces
• Unique landscaping
• Your water well, if you have one
• And other features.

If you are still having trouble locating your septic system, you might inquire of your neighbors about the location of their septic tank on their land. Finding out how far away their septic systems are will help you figure out where yours might be hidden in your yard or garden.

Check the Property Records

Are you unsure about how to obtain this? Simply contact your county’s health department for further information. Check with your local health agency to see if they have a property survey map and a septic tank map that you can borrow. Perhaps you will be shocked to learn that there are a variety of options to obtain information about your property without ever leaving the comfort of your own residence. Building permits, for example, are frequently found in county records, and they may provide schematics with specifications on how far away from a septic tank a home should be, as well as other important information such as the size of the tank.

Most counties, on the other hand, keep records of septic tank installations for every address.

Don’t Try to Fix Septic Tank Issues Yourself

Septic tank problems should be left to the specialists. The Original Plumber can do routine maintenance on your septic tank and examine any problems you may have once you’ve located the tank. It is not recommended to open the septic tank lid since poisonous vapors might cause major health problems. Getting trapped in an open septic tank might result in serious injury or death. While it is beneficial to know where your septic tank is located, it is also beneficial to be aware of the potential health dangers associated with opening the tank.

Schedule Septic Tank Maintenance

The maintenance of your septic tank on a regular basis helps to avoid sewer backups and costly repairs to your sewer system. You should plan to have your septic tank pumped out every three to five years, depending on the size of your tank and the number of people that reside in your home. The Original Plumber offers skilled septic tank and drain field maintenance and repair services at competitive prices. While it is useful to know where the septic tank is located, it is not required. Our team of skilled plumbers is equipped with all of the tools and equipment necessary to locate your tank, even if you have a vast property.

We are open seven days a week, twenty-four hours a day.

Frequently Asked Questions

A septic system is a system for the management of wastewater. Simply said, wastewater will exit your home through pipes until it reaches your septic tank, which is located outside your home.

Septic tanks are normally located beneath the surface of the earth. Solids and liquids will separate in the septic tank as a result of the separation process. Eventually, the solids will fall to the bottom of the tank and the liquids will run out onto your leach field.

How do I know if I have a septic tank?

Even if there are no obvious signs of a septic tank in your yard – such as uneven landscaping – there are a few techniques to assess whether or not your home is equipped with an onsite sewage system. Checking your property records is the most reliable technique to ensure that you are utilizing the correct system. When you acquired your house, you should have received a copy of the septic system map with the property documents as well. Checking your electricity statement is another way to determine this.

If you’re also using well water, it’s possible that you won’t receive one at all.

What do I do once I locate my septic tank?

Once you’ve discovered where your septic tank is, there are a few things you should do. It is critical to clearly mark the position of your septic tank. With our inspection, pumping, and repair services, you can save time whether you need a sewer line cleanout or a septic tank maintenance job completed quickly. Make a note of the location of your tank so that you can find it again if necessary. It should be heavy enough so that it does not fly away in windy conditions. A creative approach to accomplish this without having an unattractive flag or marking in your yard is to use garden décor or a potted plant.

This way, you’ll have it for future reference and will be able to quickly locate the exact position if necessary.

Then contact The Original Plumber to have your septic system maintained on a regular basis.

All of the heavy lifting has been delegated to our team of professionals.

Verify “Septic or Sewer” MLS Data is Correct

When you get up in the morning for your daily constitutional, where does the feces go when you flush it down the toilet? Over 2,600,000 Floridians use onsite waste disposal, sometimes known as “septic tanks,” to dispose of their waste. A septic tank is installed in over 30% of Florida homes, according to the state’s data. HomePro Inspections can take care of all of your home inspection requirements.

Septic Tank Danger

There are 85,000 septic tanks in the city of Jacksonville! According to the Jacksonville Environmental Assessment, there are 21 communities in and around Jacksonville that have been designated as “Septic Failure Areas.” The estimated cost of decommissioning those 21,000 tanks and connecting them to the JEA sewage system is $300 million. It is normally required that when municipal sewage connection is offered to a septic tank residence, the homeowner connects to local sewer service unless a waiver is given by the city or town.

The majority of those exemptions enable a septic tank that is in proper working order to continue to be used until the septic system malfunctions or the property is sold to another owner. Agents in the real estate industry are getting closer to seeing this firsthand.

Ensure the MLS Data is Accurate

Many of the risks associated with real estate transactions are minimized when the information submitted into the Multiple Listing Service (MLS) accurately identifies whether the residence is currently supplied by “septic” or “sewer.” One of the risks is that the MLS is true in stating that the home is on a septic system, but does not reveal whether or not sewage is accessible. An installation of a connection would be necessary upon transfer of the property in this circumstance. If the cost of the connection is not disclosed prior to closing, a very angry homeowner will look for someone to pay for it.

1. Another instance that occurs frequently is when the incorrect entry to the MLS is “sewer.” It is subsequently determined that it is a “septic system,” yet there is no sewer hookup accessible.
2. A circumstance in which the homebuyer says that “if they had known,” they would not have purchased the house.
3. Your number one priority should be to guarantee that the information entered into the MLS is accurate.
4. The majority of house inspection businesses run away from their responsibilities and refuse to accept any accountability.

Take Matters into Your Own Hands

To find out if a residence is on a septic system or a sewer system, go to the ‘Sewer Status’ page. These are just a few of the dangers that might occur when you are listing or selling a house that has a septic system installed. There are a plethora of others. Do you want to know what they are so that you can stay away from them? To effectively lower your risk, it is recommended that you get knowledgeable on the other dangers associated with septic systems, as well as how to communicate these risks to your home inspector.

Additional Considerations:

• Among my favorite septic tank inspection companies are Metro-Rooter (904) 695-1911
• Google + Authorship
• HomePro Inspections’ Google +
• And Septic Tank Inspections (904) 695-1911.

Does My House Have a Septic Tank?

Disclosure: This post contains affiliate links, which means that if you purchase a product after clicking on one of our links, we may receive a commission or free product from the firms featured in this post. Amazon is a good illustration of this. What is the best way to tell if the house you are currently living in or the one you are considering buying has a septic tank? The next sections will cover how to determine if your property is served by a public sewer or septic system, how to identify a septic tank and how to locate one if the property is an older one, and a variety of other subjects.

– Your house will be serviced by one of two types of waste management systems: a public sewage system or a property-specific waste management system, such as a septic system.

That is not all; there are a variety of methods for locating a septic tank on a property. Continue reading if you want to find out whether your home has a septic tank or whether it is linked to a sewer system.

How Do You Know If Your House Has a Septic System?

There are various techniques to determine whether or not your home is equipped with a septic system. Take a look at your sewage bill. When a septic system is used to handle wastewater, you will not be charged any fees on your sewer or water account from your utility provider. The location of your home also plays a role in determining whether or not your property has a septic system or is connected to a public sewage system. A septic system is very likely to be installed by residents of a rural setting.

1. If they have a septic system, it is quite probable that your property would as well.
2. If you come across a little hill or a mound that doesn’t appear to be natural, it might be a clue that a septic system is in operation.
3. The property records are one of the most reliable sources of information, especially if you are purchasing a new home.
4. Call your local city’s public works and zoning department to find out what your home is designated to be used for.

Ways to Find if My House Currently Has a Septic System or sewer?

There are four simple actions you may take to determine whether or not your present home is linked to a sewer system or whether it has a septic system. Take a look at these steps: In the first step, look around your property for any form of artificial mound of soil or hill. Depending on the form, it might be cylindrical or rectangular in shape. This mound serves as a protective covering for the drain field. If you can see a mound, it’s possible that it’s the septic system. Where are you placed in the second step?

• This ensures that the system is kept in good working order.
• If you live in a rural region where there are just a few houses, there is a good chance that you will have a septic system installed.
• Are you being charged for the use of communal sewage systems or for any related fees?
• Step 4 – Locate the property records for your residence.
• You will find all of the system’s specifications on this page.

How to Find a Septic Tank in Any Old Property

When dealing with an ancient property, locating a septic tank can be difficult, especially if the current owner, or even the previous owner, has no knowledge where the tank is located. It is possible that the owner may become confused or will forget where the tank is located. It may be necessary to use a probe or excavation to locate the tank under such circumstances. A metal detector is useful in identifying any buried drains or different components of a septic system that may be hidden underground.

If there are other ancient residences in the neighborhood that are comparable to yours, it will be easy to recognize because the tank will most likely be in the same location as your neighbor’s tank.

In addition, if a neighbor has discovered the position, that can be helpful, since the septic tank on this property may be in the same area as well.

Are Septic Tanks Located Under a House or Inside a House Safe?

If a septic tank is properly constructed and sealed, there is no danger or hazard associated with pollution in its contents. They can be found in or under the foundations of many homes. This is especially true when there is a limited amount of available area.

Finding the Lid of a Septic Tank in a Property

What happens if you are unable to locate the tank lid on the ground floor of the building? You are aware that your septic tank is full and that you must empty it. Considering that you have no knowledge where the septic tank is located, how will you be able to obtain the lid? Check out these methods for locating the septic tank’s lid:

• Examine the map–Counties maintain records of permits for the construction of septic tanks that may be seen online. A schematic of the septic tank’s position can be included in such a report as well. You’ll be able to find the location there

• Home Inspection Papers– Make sure you have a copy of your home inspection document. A house inspection is performed on any property that is being purchased or sold. It is standard practice for house inspection reports to include an illustration of the septic system and its placement.

• Look for Indicators — Look for possible signs on the surface of the water. Is there any terrain that is particularly high or low in the yard? Is the color of the grass different or growing more quickly in any particular area? You can look for such locations

• Look for markings– If specialists have buried the lid, they will leave a mark at the location to serve as a point of reference in the future. Examine the area for any markings in the shape of a colored brick or a stone that appears to be out of the ordinary. It might simply be a mark on the lid.

• The lid may be seen on these septic tanks, which are typically rectangular in design. They measure 5 feet by 8 feet in size. You may use a probe to look around the tank for its edges. You’ll need to mark the boundary of the area once again. The covers of any two-compartment tank that was installed after 1975 will be two in number.

These lids are available in polyethylene or fiberglass construction. You will very certainly be able to locate one if you dig about in this region a little. These were some of the do-it-yourself methods for locating your home’s septic tank. If necessary, you can utilize instruments such as a magnetic finder to locate the components of the septic tank. It will make your job a whole lot simpler.

What Are Some of The Places Where You Will Not Find The Septic Tank?

When looking for indicators that may lead you to the location of a septic tank, there are a few places where you should avoid wasting your time. This is due to the fact that a septic tank is not often available in these locations. Is there any particular region where the septic tank will not be installed?

• Unless you already have a well on your property, it will not be just across the street from one. The septic tank will never be located in close proximity to your residence. It will not be located in close proximity to the perimeter walls or the swimming pool. It will not be in the vicinity of the trees. In any case, it will not be located in an area with a lot of plants. It will not be directly beneath the drive
• Instead, it will be farther down the road. You will not locate it beneath any paved surface
• Instead, it is found above ground. It will not be located under any deck or patio
• Instead, Any paved structure will not have it
• It will not be found under any paved structure.

To summarize, we can say that by following any of the methods outlined above, you may simply determine whether or not your property has a septic tank. In the event that you want more assistance, you may reach out to specialists who can also aid you in locating the septic tank in your property. Sources:

How to Find Out if My House Has a Septic Tank

It will not be necessary to use heavy machinery to locate a septic tank. Once upon a time, the only alternative available to households for storing their “less than savory” waste was to install a septic tank. Many residences still have septic tanks on their properties, although a growing number of dwellings are being connected to their municipality’s sewage and septic disposal infrastructures. If you are considering purchasing a home or have already moved into a home, it is critical to understand whether or not the property includes a septic tank.

Step 1

In your back yard, look for a dig place, which may be distinguished by the presence of fresh soil, discolored grass, or grass that is not yet completely matured compared to the rest of the yard’s vegetation. It’s possible that this is where the tank lid is positioned. If you don’t find anything, keep looking.

Step 2

Check your basement for any hidden pipes. If your home has an unfinished basement, look for the point at where all of the thick plastic pipes come together and pass through the wall of the basement. You may find your septic tank 20 feet outside your home, in the direction that your sewer line is pointing.

Step 3

Make use of a metal detector to search through your yard. While the outside shell of a septic tank is frequently built of concrete, the top cover is almost always made of steel or iron, which will be detected by a metal detector if it is composed of these materials.

If you don’t already have a metal detector, check to see if there are any locations around where you may borrow one.

Step 4

A crowbar should be slammed into your yard. While you will undoubtedly appear strange to your neighbors, you may locate the cap of your septic tank by striking a crowbar or other substantial item (such as a pipe or a golf club) into the ground and looking for it. When you come across a section of the grass that is firmer than the surrounding sections, you will know you have discovered something. If this doesn’t work, try something else.

Step 5

Inquire with the former renters or the county health agency for further information. While the previous renters should be aware of the presence of a septic tank in their prior residence, if they are not, your local health agency should be able to tell you whether or not there is a septic tank on your property.

Tip

If you have a set of plans for your home, the location of any septic tanks will be shown on the blueprints.

Septic or Sewer – how to tell?

When it comes to buying a house, I recommend going the home inspection way. My mother’s house was just sold by me. It was entirely rehabilitated by myself. and, to be honest, it was in excellent condition. On their inspection, the house inspectors for the two purchasers tore it apart piece by piece, and the first buyer stormed out of the transaction. I spent tens of thousands of dollars mending things that weren’t truly broken, and in the end, I had to lower the asking price of the house. Home inspectors charge a few hundred dollars and are considered to be a seller’s worst nightmare.

1. It’s amazing what they come across.
2. We’re sorry you’ll need a replacement.
3. You know, not all of the basement outlets are GFCI protected, so lower the price!
4. Honestly, they discovered a minor leak in the sink trap, but they focused their efforts on the difficult-to-fix issues, such as the attic being 15 degrees hotter than the rest of the house.
5. Dye testing the sewer can be performed by a plumber; in our area, this is done for downspout drains that are unable to be connected to the sewage system.

How to Locate Your Septic Tank

It may seem impossible to imagine that one of the largest and most visible elements of your whole plumbing system is also one of the most difficult to locate, but when your property is served by a septic system, this is perfectly true. A strong explanation for this is because septic tanks are huge, unattractive, stink horrible and give off an unwarranted impression of dirt. Not only does burying them underground assist to prevent them from harm, but it also provides you with additional useable space on your property and conceals what would otherwise be a blight on your landscape.

This site is dedicated to assisting you in locating your septic system without the need for any time-consuming digging.

How To Find A Septic Tank: Step By Step

It is critical to maintain the health of your septic tank since it is responsible for securely storing and handling the wastewater that drains from your house. It is necessary to pump your septic tank once every 1-3 years, depending on the number of people living in your household and the size of your tank, in order to avoid septic tank repairs or early failure, which means you must be familiar with the location of your tank. It’s not often simple to identify your septic tank, and many plumbers charge extra for this service, which is especially true if your tank’s lid is buried beneath.

1. Gather Some Helpful Tools

Septic tank location may be made much easier with the use of several simple instruments and techniques. To locate your septic tank, you only need to know the following information: A soil probe is one of the most useful instruments for locating a septic tank. It is a tiny piece of metal that is used to puncture through the earth and detect anything that could be buried underneath. Start at the point where your sewage line exits your home and work your way straight out, inserting your soil probe every two feet along the way.

Using this method, you may also locate the cover for your septic tank.

While we highly advise keeping your cover clean and exposed in the event that you require emergency septic service, we recognize that this is not always the case.

2. Use a Septic Tank Map

If you are a new homeowner who is trying to figure out where your septic tank is, a septic tank map should be included in your inspection documentation. You can use this information to assist you in pinpointing the exact position of your storage tank. If you don’t have access to this map, there are a few of additional strategies you might employ.

3. Start Ruling Areas Out

The location of a septic tank cannot be constructed in specific areas due to the risk of causing major damage to your property or tank, as specified by local rules. Your septic tank will not be affected by the following:

• Immediately adjacent to your well
• Beneath your home
• Directly against your home
• For example, underneath your driveway
• Under trees
• And other locations. Structures like a patio or deck are good examples of this.

4. Inspect Your Property

If you take a hard look around your land, there’s a high possibility you’ll be able to locate your septic tank without having to do any probing whatsoever. In many circumstances, a septic tank may be identified by a slight dip or slope on your land that cannot be explained by any other means. Due to the fact that the hole that your contractors excavated for your septic tank may not have been exactly the proper size, they proceeded to install the tank anyhow. This is a rather regular occurrence.

When there is a minor divot or depression, it indicates that the hole was too large and that your contractors simply did not fill the depression to level the hole.

The likelihood of your septic tank being discovered in a few specific locations is quite high. Because of code issues or just because it doesn’t make sense, it’s highly unlikely that your septic tank will be located near any of the following locations:

• Your water well, if you have one (for a variety of reasons that are rather clear)
• Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built and no one performed a proper inspection before it was built)
• Any paved surfaces (it won’t be under a driveway, sidewalk, or patio unless they were added after the home was built and no one conducted a proper inspection before it was built)
• Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built If there is any particular landscaping

5. Inspect Your Yard

A comprehensive investigation of your yard may be necessary to discover your septic tank considerably more quickly in some cases. The following are important items to check for in your yard:

• If your septic tank is overfilled, sewage can leak out into the ground and function as fertilizer for your lawn, resulting in lush green grass. A area of grass that is very lush and green is a good sign that your septic tank is just beneath it
• Puddles that don’t make sense: If your septic tank is seriously overfilled, it is possible that water will pool on your grass. Another telltale indicator that your septic tank is below ground level is an unexplainable pool of water. Ground that is uneven: When installing septic tanks, it is possible that the contractors will mistakenly create high or low patches on your grass. If you come across any uneven terrain, it’s possible that your septic tank is right there.

The metal soil probe can let you find out for certain whether or not your septic tank is located in a certain area of your yard or not. As soon as your metal soil probe makes contact with the tank, you may use your shovel to dig out the grass surrounding it and discover the septic tank lid.

6. Follow Your Sewer Main/Sewer Pipes

Following your sewage lines is one of the most straightforward methods of locating your septic tank. These pipes have a diameter of roughly 4 inches and are commonly found in the basement or crawlspace of your house. They are not dangerous. Following the pipes from your house out into your yard, using your metal soil probe every 2 feet or so until you reach the tank, is a simple process once they are located. Aside from that, every drain in your home is connected to your sewage main, which in turn is connected to your septic tank.

The likelihood that one of your major sewer lines is located in your basement or crawlspace is high if you have exposed plumbing lines in your basement or crawlspace.

If the line is labeled, it is usually made of plastic or rubber.

7. Check Your Property Records

Lastly, if all else fails, a search of your property’s public records will almost certainly reveal the location of the tank you’re looking for. Your builders most likely secured a permit for your property because septic systems are required to be installed by law in every state. In order to do so, they had to develop a thorough plan that depicted your property as well as the exact location where they intended to construct the tank. This is done to ensure that the local health department is aware of the tank and is prepared to deal with any issues that may arise as a result of its presence.

If you look hard enough, you may be able to locate the original building records for your home without ever having to get in your car or visit your local records center.

What to Do Once You Find Your Septic Tank

Upon discovering the position of your septic tank, you should mark its location on a map of your property. Use something to indicate the location of your lid, such as an attractive garden item that can’t be changed, to help you locate it. A birdbath, a rock, or a potted plant are just a few of the possibilities.

You are now ready to arrange your septic tank inspection and pumping service. Contact us now! If you have any more concerns regarding how to locate your septic tank, or if you want septic tank servicing, please contact The Plumbing Experts at (864) 210-3127 right now!

Where’s my septic tank?

There are a few solutions available if the previous homeowner failed to supply this critical information or if you have misplaced your original copy:

• Your local DHEC office may have a copy of your building permit on file if your house was built within the last five years or fewer, according to the DHEC. A copy of a septic tank permit can be obtained from the local office by any individual or group, regardless of whether or not they own the land in question. Because of this, it is highly recommended that you have as much of the following information as possible ready at the time of your request.

• Number of the tax map
• Lot number
• Block number
• Address in the physical world
• When the system was installed or when the house was built (if this information is available)
• Name of the original permit holder (if any information is available)
• Name of the subdivision (if the property is located within a subdivision)

• You may also submit a request for a copy of the permission through our Freedom of Information office, although this is not mandatory. To obtain a copy through the Freedom of Information Office, please complete and submit a copy of the DHEC FOI form. Instructions are given with the application. If feasible, please include the information about the property that is stated above. When looking around your yard, search for manhole covers or lids that have been buried by grass or leaves if your house was constructed before 1990.

Tags

Septic Tank Alerts Septic Tank Alerts

Temporarily Unavailable

• 6dbd174d8d770132
• Ray ID: 6dbd174d8d770132
• Your IP address is 185.154.13.39
• The error reference number is 522
• The Cloudflare location is Amsterdam
• And the message is:

311 Contact Center offers you with a quick, easy, and convenient way to obtain information on local government services.

Report Problems Online

You can report neighborhood issues and code violations to the 311 Contact Center online at the 311 Contact Center. Attach a photo of the problem, offer any relevant facts, and select whether to stay anonymous or to provide your contact information for follow-up purposes.

Tweet Miamidade311

Participate in the discussion on Twitter. Send a tweet to our team of problem solvers with your problem. We know where to look for the answers!

Download Mobile App.

It is possible to report neighborhood complaints and code violations to the 311 Contact Center through the 311 Direct smartphone application, which is available for both Android and iOS devices. The software is accessible for both Apple and Android smartphones, and it is free to use.

Email Us

We are available to answer your inquiries or to take reports for you by email if you so choose. Simply give us with the necessary information, and we will take care of the rest. We will issue you with a Service Request number or provide you with the answers to any queries that you may have.

311 Service Centers

Our professionals are accessible for walk-in services at 311 Service Centers situated across Miami-Dade County in the north, south, and west.

Home Buyers Guide

Important Information to Consider Before Purchasing A Septic-System-Served Home I. OBJECTIVES Prospective homebuyers of single-family dwellings frequently have several questions about the septic system that serves the residence, including the following: What exactly is the structure of the present septic system? Is it up and running properly? How long do you think it will last? What will the cost of a replacement system be if this one fails? Our goal is to provide purchasers with information that will alleviate their fears.

• II.
• This is accomplished through the use of septic tanks.
• A well running septic tank will lower pollutant levels and create effluent that is of a relatively consistent chemical composition.
• The new tanks (which have been in service since January 1991) are divided into two compartments in order to achieve the aforementioned goal in an even more efficient manner.
• In most cases, “gravity” systems are used to transport sewage via pipelines and distribution boxes without the need of any mechanical devices like as pumps or siphons; and 4) a drainage (leaching) system to distribute sewage effluent into the surrounding natural soils.
• The precise type of concrete that is used on a particular property is typically determined by the soil conditions that present on the land.

The majority of residential installations make use of stone-filled leaching trenches, but galleries, pits, and beds have all been employed in the past. In order for a drainage system to work correctly, it must meet the following requirements:

1. Provide a sufficient amount of application space. The application area is defined as the amount of soil surface area given by a specific drainage system (sides and bottom area of leaching units) where sewage effluent is applied to a specific location (referred to as “wetted” area). An individual house’s application area need is determined by the soil properties of the site as well as the daily flow rates (measured in gallons) generated by the house’s plumbing system. Ordinarily, the projected flow from a property is determined by the number of bedrooms in the residence. Natural soil conditions must surround the septic tank so that the effluent discharge may be dissipated and dispersed without getting over saturated. Provide sufficient capacity to hold effluent during periods of abnormally high usage or when rainfall or subsurface flooding impairs the system’s ability to disseminate the liquid
2. And

Note: Drains/groundwater interceptor drains are occasionally placed as part of a drainage system update in order to reduce the risk of excessive groundwater levels. It is critical to understand that, after a system has been implemented, only one of the elements listed above may be modified by the homeowner. The amount of water that is actually released into the system may be controlled by the homeowner. Because each system has a specific maximum capacity, it is in the best interests of the homeowner not to exceed that limit.

1. It is possible that plumbing fittings will have trouble discharging their contents (slow draining, bubbling, backups, etc.). This condition might be indicative of a systemic problem, but it could simply be caused by a blockage in the inner plumbing or sewage line. Before starting with an assessment of the sewage disposal system, you should have the inside piping examined. Large-volume discharges (such as those from washing machines, dishwashers, and bathtubs) can result in either a backlog, as described above, or an overflow of sewage above the septic tank or leaching field, depending on the situation. It is most common for this condition to be at its worst after and/or immediately following a severe rain storm. It is possible that foul septic odors are coming from storm drainage piping, catch basins, footing drain pipe, or curtain drain discharges, indicating that sewage from your home or a nearby property is getting into these groundwater systems.

III – SOURCES OF INFORMATIONWhat can a potential home buyer do to acquire as much information as possible about the current status of the house’s septic system and the possibility of future costs related with the system? The following are some recommendations:1. Obtain information from the current property owner

• Inquire about any drawings that show the exact position of the existing septic system (also known as a “as-built” drawing). Alternatively, the health department of the town (see Paragraph 3 below) might be consulted. Inquire about the documents pertaining to the system’s maintenance. Has the septic tank been drained at least three to five times in the last five years? What type of pumping contractor was employed
• If the system is equipped with a pump, how frequently has it been serviced? If extensive repairs have been completed, when and to what degree have they been completed
• Inquire about the system’s prior performance by calling the company. Have any of the symptoms listed in Section II showed themselves during the course of the system’s operation?

Make a site inspection of the property before purchasing it.

• As soon as you’ve determined the position of the septic tank and drainage fields, take a stroll around the entire area and look for any signs of a sewage overflow situation. It is possible that greener grass in the drainage region does not always imply a problem with the system. If the region, on the other hand, is entirely soaked and odorous, you should be really worried. It is most likely indicative of a failure in progress. Try to obtain a feel of how the natural environment is affecting the property’s ability to distribute water by walking about it. It is possible that the sewage disposal facility is positioned in a depression that has the potential to absorb runoff from rainwater. Is the property level? Is there a watercourse or wetland (swamp) near the drainage system, and is the drainage system and the watercourse or wetland (swamp) at nearly the same elevation? Are there any steep slopes and/or ledge outcrops that would limit the amount of usable area for leaching? If so, what are they? Everything mentioned above might point to difficulties with the present system, as well as a lack of suitable extra land for sewage disposal on the property in the event that it becomes necessary in the future.

3. Visit the Town Health Department to have the property’s file reviewed.

• Inviting the local sanitarian to review the paperwork with you is a good idea. If so, does it contain enough information for him or her to offer you an opinion on whether the existing system and/or lot complies with current health code requirements? Your objective is to validate and complement information provided by the property owner. Find out how to properly maintain a subterranean sewage disposal system by reading the following: If you are considering building an addition to your house or refurbishing an unfinished basement, consult with a sanitarian about the options and the processes you would need to follow in order to complete your project. Occasionally, it will not be able to “additionally expand” an existing home. Question the general neighborhood, such as the frequency of repairs, capacity to build appropriate-sized repair systems, and average life of systems in the region, among other things.

4. Obtain further information from non-governmental organizations.

• At the moment, many house transactions are conditional on the completion of a home inspection. Opening up and checking essential components of an existing sewage disposal system is the most reliable method of determining the current status of the system, depending on whether or not the current owner of the land will allow it. It is possible that an inspection of the inside of a septic tank(s) and distribution boxes will reveal that the system is having difficulty spreading the volume of sewage generated by a residence. When access to an existing system is not possible, home inspectors may resort to other techniques of determining the condition of a system that is already in place. Unfortunately, some of the individuals responsible for conducting these tests do not have a thorough grasp of how a system operates. As a result, the findings made as a result of these tests may be incorrect. As an example, testing a system during the summer months may suggest that the system is operational while the system is really submerged in groundwater during the spring months and unable to work as intended.

The following are three frequent tests that are done during a house inspection:

1. Septic tank effluent is traced into the leaching system with the use of the Dye-Test method of analysis. A common belief is that when dye “surfaces” to the ground or emerges in a stream or catch basin, the system is in peril. However, even while this is true, the opposite outcome does not always imply that the system is operating well or that it will continue to function effectively in the future. It is necessary for the dye to pass through the septic tank and leaching fields before reaching the breakout point in order for it to become visible. This would normally necessitate a significant amount of water and a significant amount of time, and most house inspections do not last long enough to meet this criterion. The Probe-Test is a procedure in which the inspector attempts to locate the “key” elements of the system (septic tank and drainage fields) and determine if they are experiencing overflow conditions. This type of test would only detect severely failed systems (those that have a direct discharge of sewage into the environment)
2. (meaning the septic tank and fields are flooded). As a result, this test is essentially incorrect since it just takes a single “snapshot” of the system’s current state. A Flooding Test (also known as a “push test”) is actually the process of discharging a substantial quantity of water into an existing septic system in order to simulate a typical “peak” use of water by the homeowner. It may be a “good” day for the system (very little water was used by the homeowner that day
3. The house may have been empty for some time
4. It may be the middle of the summer when soil conditions are at their best)
5. And a judgment is being made with very little Aiming to identify systems that have lost their capacity to spread “peak” flows and, as a result, may not be suitable to meet the expectations of prospective purchasers, the test is designed to reveal such systems. A particular quantity of water has been “flushed” down sinks, tubs, and toilets, and the inspector investigates the leaching area to see if there are any symptoms of a “overflow” situation. An “overflow” indicates that the system is not operating properly, and the inspector comes to the conclusion that the system is not operating properly. But it should be remembered that simply passing the test does not necessarily imply that the system is operating effectively. Many inspectors do this sort of test because they believe it would be a disservice to their clients if they did not gather information on the current state of an existing system. But we are concerned that if this test is not carried out in a responsible and site-specific manner, it might cause damage to the present system or result in incorrect results. If this test is done, we recommend that the following considerations be taken into consideration before reaching any conclusions:

• Occupancy of the house at the time of writing
• The possibility of water consumption by the inhabitants within the previous 24 hours prior to completing the tests
• Soil conditions in the leaching region, including the degree of saturation caused by groundwater levels, rainfall events, and the time of year
• And Water should be applied to the system in a gradual, consistent way (for example, by flowing water through the plumbing fittings) to avoid a “slug” of water entering the septic tank and disrupting the contents. In light of the information provided above, the process should restrict the amount of water used for the test, although it should not exceed 50 gallons per bedroom in a fully inhabited (two persons per bedroom) residence.

To reiterate, the above-mentioned testing is intended to identify septic systems that are clearly in need of repair. None of the tests mentioned above can provide an assurance that a home’s present sewage disposal system will continue to function effectively in the future. You can use County Maps from the Soil Conservation Service (which you can get from the local sanitarian) to try to identify what type of soil is most likely present on the site and forecast the feasibility of future repairs to the existing leaching system by looking at them.

However, this is only recommended for people who are “comfortable” with approaching this issue with “strangers” and who are aware that the information received may not be completely factual for a variety of reasons, as previously stated (devaluation of their own property; not wanting to “spoil” the sale of a friendly neighbor, etc.).

They can provide you with information on the soil and septic system conditions in the area, as well as what may be expected (particularly in terms of expenditures) if you have difficulties with the existing system.

Afterwards, you may compare the results to what your family is currently utilizing.

4.

Assuming that proper soil test data is not accessible through the local health department, the only way to definitively answer this issue is to actually undertake all of the deep hole testing and percolation tests that are mandated by code.

Consequently, the more information a buyer can gather, the better equipped he or she will be to assess the suitability of the present system and to determine what will most likely be required to fix the system if and when it becomes necessary.

So that the buyer is not taken off guard when that day occurs, because it was included in the financial evaluation that determined the property’s current market worth at the time of purchase.