- You can locate the lid of your septic tank by poking the ground every few feet with a metal probe. Lids can be buried up to a foot deep on average, so be sure to investigate any bumps that may indicate something is buried underneath. You can also use a metal detector, as most lids have a metal handle or fastener on them to keep the lid closed.
How deep is a septic tank lid buried?
Often, septic tank lids are at ground level. In most cases, they have buried anywhere from four inches to four feet underground. If you’ve just bought the home and you don’t know where your septic tank is located, this guide will provide information on how to find your septic tank.
Do septic tanks have concrete lids?
A septic tank installed before 1975 will have a single 24-inch concrete lid in the center of the rectangle. A shallow excavation with a shovel at those locations should reveal the lid or lids, depending on the year of the tank.
Do septic tanks have 1 lid?
Solid, watertight, buried tank made of concrete, plastic, fiberglass or metal. Septic tanks should have one lid per compartment. Most tanks have (2) compartments. So, most residential tanks should have (2) lids about 5′ away from each other.
Should a septic tank lid be sealed?
Like wells, septic systems have problems if they are not sealed from outside surface water. Most septic systems rely on buried pipes to get rid of the fluids. The lid covers should fit tightly — if they don’t, a company that specializes in septic repairs should be called to fix them.
Do all septic tanks have filters?
First, not all septic tanks have a filter, especially the older septic tanks. Now many government agencies require or recommend a filter when a septic tank is installed. Cleaning a septic tank filter is different than pumping out a septic tank and cleaning it.
How often should a septic tank be pumped?
Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.
Will metal detector find septic tank?
If it’s Concrete or Steel, Use a Metal Detector. Based on your conclusions in Step 3, if your septic tank is likely made from concrete or steel, a metal detector can make the task of locating it much easier. But not just any metal detector will do.
How do I know if my septic tank has two lids?
You will be looking for 2 lids like these if there are risers to surface on the tank. If the tank is not risered, you will find 2-24” diameter concrete lids like the picture below. Riser lids the can be below the surface which will require locating and digging the riser lids as well.
Do all septic tanks have two covers?
Most septic tanks have two to three covers; one over the inlet side of the septic tank (where the water from your home enters the tank), one in the center of the tank, and one on the outlet side of the tank (where the liquid from the tank exits to your leach field).
How to Find the Lid on a Septic System
All septic tanks eventually fill with sediments and must be pumped out on a regular basis in order to remain in excellent functioning order. If the tank’s lid is not on a riser at ground level and you are not the home’s original owner, you may be unable to determine where the lid is located. A typical septic tank is 4 inches to 4 feet underground, with all of its components, including the cover, buried between 4 inches and 4 feet underneath. This is true regardless of whether the septic tank is equipped with special risers that keep the lid flush with the surface of the ground.
Consult A Map
First, choose with the most straightforward choice. The installation of septic tanks at all locations is recorded in most counties’ permission records, which are kept on file for future reference. Typically, this will include a schematic indicating the placement of the tank on the land, as well as certain dimensions that will allow you to measure to the precise site of the tank. If your tank was placed before your county made it a requirement to record the location of such tanks, you may find yourself with nothing to show for your efforts.
Search For A Sign
Septic tanks are placed in such a way that they are as unnoticeable as possible on the land. After the grass has grown back after installation and some time has passed, it is possible that just a few visual indications will remain. Pay particular attention to the contours of your yard for any inexplicable high or low points that might suggest the presence of an underground storage tank.
Follow The Pipe
Installation of the septic tank takes place along the sewage line that runs from the house into the front yard. Locate the 4-inch sewage pipe at the point where it exits the home in the basement or crawl space, if it is there. Locate the same spot outside and make a note of it. Insert a thin metal probe into the earth, identify the 4-inch sewage line, and follow it across the yard, probing every 2 feet, until you reach the end of the property. Septic tanks are required to be at least 5 feet apart from the home in all states except Alaska.
Whenever the probe makes contact with flat concrete, fiberglass, or polyethylene it indicates that the tank has been located.
Locate The Lid
The majority of septic tanks are rectangular in shape and measure around 5 feet by 8 feet. Investigate the tank’s circumference to determine its boundaries and outline the rectangle’s boundary using a pencil. A septic tank that was built before 1975 will have a single concrete lid that is 24 inches in diameter in the center of the rectangle. If the tank was built after 1975, it will have two covers made of fiberglass or polyethylene, centered at the ends of the rectangle and centered at the ends of the rectangle.
It should be possible to uncover the lid or lids by digging with a spade in specific spots, depending on when year the tank was constructed.
Call A Professional
Opening a septic tank is a job best left to the pros once the lid has been discovered. Concrete septic tank lids are extremely heavy, and many require the use of lifting tools to remove them completely. An open tank has the potential to release toxic gases. Anyone going around on the property who comes into contact with an exposed septic tank might be in risk. Because of the noxious vapors present in an open tank, falling into one can be lethal.
Mark The Spot
Make a note on the ground near where the tank was pumped by a professional and the lid was buried to serve as a reference in the future. In order to keep track of where you are, you should choose a hefty circular patio tile that is embedded in the ground. Additionally, draw your own map of the area and store it with your other important papers.
How to Find Your Septic Tank
Over time, all septic tanks become clogged with sediments and must be pumped out in order to continue functioning properly. Septic tank lids are frequently located at ground level. The majority of the time, they have been buried anywhere between four inches and four feet underground. In the event that you have recently purchased a property and are unsure as to where your septic tank is located, this article will give instructions on how to identify your septic tank. Noteworthy: While every property is unique, septic tanks are usually typically huge and difficult to build.
5 Ways to Find Your Septic Tank
1. Check with the municipal records. The most straightforward method of locating your septic tank is to review the building plans for your home that were approved by the local government. You should have received an application from the business that installed the septic tank, which should contain schematics and specifications that will help you to locate the precise location where the septic tank was installed. 2. Look for highs and lows in your data. The majority of septic tanks are constructed in such a way that they are barely noticeable.
- Almost usually, your septic tank will be constructed near where the main sewage line exits your property.
- Septic tanks are typically positioned between ten and twenty-five feet away from a home’s foundation.
- When you do, that’s when your septic tank comes into play!
- Look for the Lid.
- You will most likely find two polyethylene or fiberglass covers positioned on opposing sides of the perimeter of your septic tank if it was built after 1975 and installed after 1975.
- Those areas should be excavated in order to disclose the lids.
- Get in touch with the pros.
- Lifting concrete lids will necessitate the use of specialized equipment.
- A fall into an unprotected septic tank has the potential to be lethal.
- Produce your own diagram of your yard, which you may file away with your other important house paperwork.
That’s all there is to it! If you’ve been wondering where your septic tank is, you now have five alternatives to choose from, which should make finding it easier than ever. To book a plumbing service in Bastrop County, please contact us now!
How to Find Your Septic Tank Lid
Previous PostNext PostWhether you realize it or not, it is critical that you be aware of the position of your septic tank lid and the septic tank itself. Despite the fact that septic tanks are fairly huge, they can be difficult to identify, particularly if they have not been properly maintained over time. Continue reading to find out how to locate your septic tank lid.
Why It’s Good to Know Where to Find Your Septic Tank Lid
Knowing the location of your septic tank is a fantastic approach to spot septic tank problems as soon as they occur. Consider the following scenario: If you saw water near your septic tank lid, you would know right away that you could have a problem with your system being overloaded with waste. Furthermore, by understanding where your septic tank is located, you may avoid parking cars on top of it, which might cause the tank to collapse and create flooding. You’ll also be able to point service personnel in the right direction for septic tank services, which will eventually save them time and money while also saving you money.
How to Find Your Septic Tank Opening
Knowing how critical it is to know where your septic tank lid is located, it’s time to go out and find one for yourself. Keep an eye out for a circular lid that is roughly two feet in diameter during your quest. Septic tank lids are normally constructed of green or black plastic, however they can occasionally be made of concrete. It is not always simple to locate the septic tank lid, however, because untidy vegetation, mud, or debris might obscure the lid’s location. If you live in a snowy climate, seek for a spot of lawn where the snow melts more quickly than it does anywhere else on the property.
How to Find Your Septic Tank Lid as a New Homeowner
During the process of purchasing your house, you should have been provided with a map of your property that showed the location of your septic tank. This is normally included as a part of your home inspection service package. All you have to do from there is compare the diagram to your land, find the septic tank location, and potentially dig around it to check whether the lid has been hidden by vegetation or other obstructions. People have been known to place an object such as a huge rock on top of the septic lid, so be sure to look beneath landscaping stones as well.
How to Find Your Septic Tank Lid as an Existing Homeowner
Still having trouble locating your septic tank lid? There’s a significant probability it’ll end up in the ground. The pipes coming from your basement should be followed, as they will take you in the direction of your septic system, which is what we propose. Then, once you’ve determined the correct direction, check for any high or low points in the yard that might reveal the location of your septic tank. You can find the lid of your septic tank by probing the ground with a metal probe every few feet with the probe.
Because most lids have a metal handle or fastener on them to hold the lid closed, you may also use a metal detector to find them.
The majority of lids are buried up to a foot deep, but some lids might be buried as deep as four feet in extreme cases! In some instances, a professional with specialized locating equipment may be required.
How to Maintain Your Septic Tank Lid
Following the discovery of your septic tank lid, keep it in good condition to avoid damage and ensure simple access for future septic tank maintenance, such as pumping your septic tank every three- to five-year period. Here are some pointers for keeping your septic tank lid in good working order:
- Following the discovery of your septic tank lid, keep it in good condition to avoid damage and ensure simple access for future septic tank maintenance, such as pumping your septic tank every three- to five-year interval. For good maintenance of your septic tank lid, follow these suggestions:
Professional Septic Tank Services
Is it difficult to find trustworthy septic tank services or septic tank installation? If you are looking for septic tank installation, inspection, and cleaning services, check with your local Mr. Rooter ® Plumbing franchise. Mr. Rooter charges a set amount up front, with no overtime fees or additional expenses. To get started, call us at (855) 982-2028 or fill out our online estimate request form. Is the lid of your septic tank obscured by grass? Inquire with The Grounds Guys about routine lawn care and upkeep.
Rooter, is a member of Neighborly’s network of dependable home service experts, which includes Mr.
By hiring The Grounds Guys to provide trustworthy grass mowing and landscape care services, you can be assured that your septic tank lid will always be simple to locate.
How To Find My Septic Tank
- What is a septic tank
- How do I know if I have a septic tank
- And how do I know if I have a septic tank Identifying the location of your septic tank is critical for several reasons. The Best Way to Find a Septic Tank
- What to Do Once You’ve Discovered Your Septic Tank
You may have fallen in love with your new house because of its appealing good looks and characteristics, but there is almost certainly more to your new home than meets the eye. In many cases, the characteristics that make your house run more effectively and allow you to live a pleasant, contemporary life are not readily apparent. Septic tanks, for example, are an important part of your home’s infrastructure. A septic system is responsible for regulating and managing the wastewater generated by your home.
- “How can I locate my septic tank?” is one of the most often requested inquiries we receive.
- When your tank’s lid is difficult to locate – especially if you are not the original homeowner – you may be at a loss for what to do or where to look for the lid when you need it.
- The majority of the time, all of the components of the septic tank are buried between four inches and four feet below ground level.
- In order to do so, it is necessary to first comprehend the functions of septic tanks and septic systems and why it is important to know where yours is located.
How to Locate Your Septic Tank
Your septic tank’s location is not a closely guarded secret. There will be a method for you to locate it and make a note of its position for future reference, and below are a few examples of such methods.
What Is a Septic Tank?
Having a functioning septic tank is an important aspect of having an effective septic system. In the United States, around 20% of households utilize a septic system to handle their wastewater. Houses in rural parts of New England are the most likely to have a septic system, with residences in the Eastern United States being the most prevalent location for septic systems. When there are few and far between residences, it is typically more efficient and cost-effective to employ a septic system to manage wastewater rather than relying on a public sewage system to handle waste water.
Typically, a septic tank is a container that is waterproof and composed of a material such as concrete, polyethylene, fiberglass, or a combination of these.
An important function of a septic tank is to hold on to wastewater until any particulates in the water separate themselves from the water.
Any liquid that remains in the tank eventually drains into a leach field or a drainfield, where it is known as “effluent.” The dirt in the leach field aids in the filtering of the water and the removal of bacteria, viruses, and other pollutants that may be present in it.
Septic tanks erected in Onondaga County must contain input and outlet baffles, as well as an effluent filter or sanitary tees, in order to effectively separate particles from liquids during the treatment process.
How Do I Know If I Have a Septic Tank?
What is the best way to tell if your home has a septic tank? There are generally a few of different methods to tell. Examining your water bill might help you identify whether or not your house is served by a septic system or is part of the public sewage system in your neighborhood. If you have a septic system for wastewater management, you are likely to receive a charge from the utility provider for wastewater or sewer services of zero dollars. In the case of those who are fortunate enough to have a septic system, it is likely that they may not receive any water bills at all.
- A lack of a meter on the water line that enters your property is typically indicative of the fact that you are utilizing well water rather than public utility water, according to the National Association of Realtors.
- A septic system is likely to be installed in your home if you reside in a rather rural location.
- Septic systems are likely to be installed in all of these buildings, which means your home is likely to be as well.
- When a septic tank is present, it is common to find a mound or tiny hill on the property that is not a natural structure.
- Checking your property records is a foolproof method of determining whether or not your home is equipped with a septic system.
Why It’s Important to Know the Location of Your Septic Tank
You might wonder why you should bother trying to discover out where your septic tank is. There are several important reasons for this:
1. To Be Able to Care for It Properly
You might wonder why you should bother figuring out where your septic tank is located. A few important causes for this include the following:
2. If You Want to Landscape or Remodel Your Property
If you want to build an addition to your home or perform some landscaping around your property, you will need to know where your septic tank is located. Nothing with deep or lengthy roots should be planted on top of or in the area of your tank, since this can cause problems. If roots are allowed to grow into the pipes of your septic system, it is conceivable that your system will get clogged. When you know where the tank is going to be, you may arrange your landscaping such that only shallow-rooted plants, such as grass, are in close proximity to the tank.
For starters, the tank’s weight might lead it to collapse due to the weight of the construction. A second issue is that getting access to the tank becomes more difficult if a permanent building has been constructed on top of it.
3. If a Problem With Your Tank Occurs
Knowing where your tank is buried might also assist you in identifying problems as soon as they arise. Consider the following scenario: you wake up one morning and see that there is flooding or ponding water in the region surrounding your septic tank – a sign that your system is overwhelmed and that an excessive amount of water is being utilized all at once.
4. Ease of Getting It Fixed
Knowing where your tank is buried might also assist you in identifying problems as soon as they arise. Consider the following scenario: you wake up one morning and see that there is flooding or ponding water in the region surrounding your septic tank – a sign that your system is overwhelmed and that an excessive amount of water is being used all at once.
1. Use a Septic Tank Map
Knowing where your tank is buried might also assist you in identifying concerns as soon as they arise. For example, you could wake up one morning and realize that there is flooding or ponding water in the region around your septic tank – an indication that your system is overloaded and that too much water is being utilized all at once.
2. Follow the Pipes to Find Your Septic Tank
Whether or not there is an existing map of your septic tank on file, or whether or not you choose to develop one for future reference or for future homeowners, you will still need to track down and find the tank. One method of accomplishing this is to follow the sewer lines that lead away from your residence. The septic tank is situated along the sewage line that goes from your home and into the yard, as we’re sure you’re aware. Find a four-inch sewer pipe in your basement or crawl space. This is the line that will lead to your septic system and should be accessible from the ground level.
- In general, though, you’re searching for a pipe with a diameter of four inches or more that leaves your home via a basement wall or ceiling.
- By inserting a thin metal probe (also known as a soil probe) into the earth near the sewage line, you can track the pipe’s location.
- The majority of septic tanks are located between 10 and 25 feet away from your home, and they cannot be any closer than five feet.
- Going via the sewage line itself is another method of locating the septic tank utilizing it.
- Drain snakes are typically used to unclog clogs in toilets and drains, and they may be used to do the same thing.
- When the snake comes to a complete halt, it has almost certainly reached the tank.
- While drawing the snake back, make a note of how far it has been extended and whether it has made any bends or turns.
- When looking for your septic tank, you may use a transmitter that you flush down the toilet and it will direct you straight to the tank.
If you only want to keep an eye on the condition of your tank and don’t need to dig it up and inspect it, you may thread a pipe camera into the sewer pipe to see what’s happening.
3. Inspect Your Yard
Septic tanks are designed to be as unobtrusive as possible when they are erected. With the passage of time, and the growth of the grass, it might be difficult to discern the visual indications that indicated the exact location of your septic tank’s installation. However, this does not rule out the possibility of finding evidence that will take you to the location of your septic tank in the future. First and foremost, you want to rule out any potential locations for your septic tank, such as:
- Under a road or similar paved surface, for example. Right up against the house (the tank must be at least five feet away)
- Directly in front of the home Immediately adjacent to your well (if you have one)
- In close proximity to trees or densely planted regions
- In the shadow of a patio, deck, or other building
Once you’ve ruled out any potential locations for your tank, it’s time to start hunting for indications as to where it may be hiding in plain sight. Keep your eyes peeled as you go about your property, looking for any inexplicable high or low points that might suggest the presence of an underground tank. When looking at your property, you could see a hill or mound on the ground, which is frequently an indication that there is a septic tank nearby. One further item to consider while searching for the right septic tank for your home is the amount of grass or other foliage in your yard.
Alternatively, if the tank was not adequately buried, you may observe a “bald patch,” which is an area where the grass is struggling to grow in the vicinity.
4. Talk to Your Neighbors
If your neighbors have septic systems as well, they may be able to assist you in locating your tank. Inquire of your neighbors about the location of their septic tanks in relation to their residences. Having a polite conversation with your neighbors regarding septic systems not only provides you with a means to figure out where yours is, but it may also serve as a friendly introduction to the other residents of your community.
5. Look for Your Septic Tank Lid
If your neighbors have septic systems, they may be able to assist you in locating where your tank is located. Find out where the septic tanks of your neighbors are located in relation to their residences by speaking with them. Not only can chatting to your neighbors about septic systems help you figure out where your own system is, but it may also serve as a welcoming introduction to the rest of your community if you are new to the area.
What to Do After You Find Your Septic Tank
Once you’ve determined where your tank is, it’s time to bring in the specialists. Trust us when we say that opening a septic tank is not something that just anybody wants to undertake. Concrete septic tank lids are extremely heavy and must be lifted using special lifting gear in order to be removed. Since the vapors are potentially dangerous due to the contents of the tank, please respect our advice and refrain from attempting to open the tank yourself. An exposed septic tank can be hazardous to anybody wandering around your property’s perimeter, and if someone were to fall into it, it might be lethal owing to the toxicity of the sewage in the tank.
However, before you send in a team of experienced plumbers, there are a few things you can do to ensure that others do not experience the same difficulty locating the tank and to make locating the tank in the future easier.
1. Mark Its Location
The likelihood is that you will not want to post a large sign in your yard that reads “Septic Tank Here!” but you will want to leave some sort of marking so that you can quickly locate the tank and lid when you need them. In an ideal situation, the marker will be substantial enough that it will not blow away in the wind and will not be readily moved by children who are playing in the yard. A patio paver, a potted plant, or a decorative gnome or rock are just a few of the possibilities. In addition to putting a physical sign beside the septic tank, you may draw a map or layout of the area around it to illustrate its position.
2. Take Care of Your Septic Tank
Taking proper care of your tank may save you hundreds of dollars over the course of its lifetime. The expense of maintaining your system could be a few hundred dollars every few years, but that’s a lot less than the thousands of dollars it might cost to repair or replace a damaged tank or a malfunctioning septic system. Two strategies to take better care of your septic tank and system are to avoid utilizing your drain pipes or toilets as garbage cans and to use less water overall. Things like paper towels, face wipes, and cat litter should not be flushed down the toilet since they are not designed to be flushed.
In addition, installing low-flow faucets and high-efficiency toilets can help you reduce the amount of water used in your home.
For example, you don’t want to be washing load after load of laundry or running your clothes washer at the same time as your dishwasher all at the same time.
Call a Professional Plumber
Maintenance of a septic system is not normally considered a do-it-yourself activity. In the Greater Syracuse region, whether your septic tank requires pumping out or cleaning, or if you want to replace your tank, you should use the services of a reputable plumbing firm to do the job right. If you’ve attempted to locate your septic tank on your own and are still unsure of its position, it may be necessary to enlist the assistance of a professional local plumber. Our team at Mr. Rooter Plumbing of Greater Syracuse can assist you with locating, maintaining, or replacing your home’s sewage tank.
Request an Estimate for the Job
How to Find a Septic Tank With a Metal Detector
For sewage treatment in the United States, around 48% of households in rural and outlying regions depend on septic tanks or septic systems. Many of these systems have been operating without regular maintenance for many years.
It is necessary to locate your septic tank in the event that sewage is backing up into your home or if your main drain line has become obstructed. Throughout this post, we’ll go over the basics of how septic systems function before showing you how to identify your septic tank in six simple stages.
How do septic systems work?
A septic system is made up of two parts: the septic tank and the drain field (or leach field).
Waste from toilets, sinks, and showers is sent down a main sewage line and into a holding tank known as the septic tank. A septic tank is a large, subterranean container that acts as the initial stage of a home’s sewage treatment system by collecting and treating sewage. Watertight containers such as concrete, steel, plastic, and fiberglass are used to construct the tank. Until the particles and liquids separate into three different layers, sewage is allowed to remain in the septic tank. This picture shows how sewage from the home drains into a two-compartment underground septic tank.
The liquid wastes are subsequently discharged into the drain field.
The bacteria produce a sludge that is “digested” and stays in the tank until it is drained.
This stratum is referred to as effluent in most circles.
Drain fields are composed of layers of gravel and dirt that allow liquid sewage to flow down. It eventually becomes part of the groundwater supply. Aerobic bacteria (bacteria that require oxygen to survive) and other microbes decompose the organic debris that remains.
What happens if a septic tank gets too full?
In the event that your septic tank becomes overflowing, sewage may back up into your home. It is more difficult to breakdown sludge than it is to collect it. If the sludge isn’t cleaned, the solids will build up until they overflow into the drain field, causing the drain to back up. This has the potential to clog pipes and produce a backup. The sludge must be cleared on a regular basis in order to avoid this. Many households only get their tanks emptied after the system malfunctions. Waiting until that stage can result in repair expenses in the tens of thousands of dollars.
6 Steps to Locate a Septic Tank
Water from your toilets, sinks, and showers is collected in a main drain pipe and disposed of properly. This line departs your home and enters your septic tank through the basement or crawl area where it was installed. Find the line in question. Afterwards, walk outside and look for the identical location on the opposite side of the wall. Make a note of this spot since you’ll need it in a moment.
2. Check Permits and Public Records
The majority of county health agencies keep public records of septic system installation permits on their websites. These permits must be accompanied by a schematic or design depicting the proposed location of the septic tank and drainage field systems. They also give a description of the tank’s dimensions and construction material. Having this information can be quite beneficial when trying to locate a submerged tank lid. In some cases, depending on the age of your septic system and the digitization efforts of your county’s health department, you may be able to do a public records search online.
Alternatively, you can make a public records request for a modest charge with the appropriate authorities. If you live in Colorado, we’ve provided links below that will allow you to check septic records in a few different areas.
- The majority of county health agencies keep public records of septic system installation permits on their website. These licenses must be accompanied by a schematic or design depicting the proposed location of the septic tank and drainage field. A description of the tank’s dimensions and material is also included in the documents. Finding a submerged tank lid with this information can be quite beneficial. It is possible to look for public records online depending on the age of your septic system and the digitization efforts of your county’s health department. Other options include filing for public documents for a modest cost and contacting the appropriate government department. Please see the links below if you are looking for septic records in a specific county in Colorado.
3. Determine Septic Tank Material
If you’ve located your septic permit, you’ll find information about the size, shape, and material of your septic tank there as well. But don’t be concerned if your septic data aren’t readily available. We can perform some basic detective work to determine what material your septic system is built of. Let’s start with a look at the materials.
Types of Septic Tank Materials
Construction of septic tanks is mostly done using four types of materials: concrete, steel, fiberglass, and polyethylene plastic. Until the 1880s, the most extensively used septic tank material was concrete, which was then replaced by steel. These tanks have a lifespan of around 40 years and are built to last. They are susceptible to cracking, however, in locations where temperature variations are strong and frequent. Concrete tanks are frequently required by municipalities that have strict requirements on septic system construction.
- Steel septic tanks begin to corrode within 20 to 25 years of installation in most regions.
- If a human or animal walks across the weakened tank, it may collapse under the weight of the person or animal.
- They will not break or corrode, however, in contrast to concrete or steel tanks.
- PlasticSeptic tanks made of polyethylene have been in use since the 1980s.
- They are not susceptible to rusting and are less prone to break when compared to concrete.
- Because of the weight of the earth above them, or because a vehicle passes over the area where they are buried, plastic tanks are susceptible to collapse.
How Old is Your House?
Next, let’s determine the approximate age of your home. In some cases, all you need to do is take a glance at the house’s façade to get an idea of how old it really is. However, you may examine the tax assessor’s records in your county to get a more precise assessment. Similarly to searching for septic records, your mileage may vary depending on which county’s digitized documents you are searching for. Let’s go over an example search utilizing Boulder County’s Property Search tool so that you can have a better sense of what you should be looking for.
- Look up your home address on the internet. When searching for a home, some programs provide separate areas for your address and street name, while others (such as Boulder County) merge the two into a single search box. Look for information on Deeds and/or Sales Records in the public domain. You’ll find a list of transactions here, with dates showing when the property was purchased and sold. Find the transaction that occurred on the earliest possible date. This is most likely the year in which your home was constructed.
This information allows you to make an informed guess regarding the sort of material that your septic tank is built of.
4A. If it’s Concrete or Steel, Use a Metal Detector
After coming to the conclusion that the tank is most likely built of concrete or steel in Step 3, a metal detector may be used to make the work of locating it much simpler. But not just any metal detector will do. It must be the right one. Standard metal detectors have a depth range of 6 – 8″ (15 – 20 cm) below the surface of the ground. As previously stated, the majority of septic tanks are placed 1′ to 3′ (0.3 m to 1 m) underground, putting them outside of the acceptable range. An advanced sort of metal detector known as a Magnetic Locator, which can detect objects as deep as 16′ (4.8 m), is available for purchase.
Due to the fact that it exclusively detects iron and steel, it is perfect for finding the iron handles and reinforcing bars in concrete septic tanks, as well as the walls of steel tanks.
How to Use a Metal Detector to Search for a Septic Tank
If you have a septic permit record, you may refer to it to figure out how far you need to go to install a septic tank. Start at the point where the drain line meets the home and work your way out to where the septic tank is shown on the diagram. Keep in mind that this graphic depicts the proposed installation area and may not accurately depict the actual ground conditions on the site. We’ll have a look at the illustration below. One inch (2.5 centimeters) is equivalent to fifty feet (50 meters).
By using a ruler to measure the design, we’ve determined that the septic tank should be roughly 13′ (3.96 m) away from the home.
- If you have a septic permit record, you may refer to it to figure out how far you need to go to construct a septic tank. Start at the point where the drain line meets the home and work your way out to where the septic tank should be. Keep in mind that this graphic represents the proposed installation area and may not accurately depict the actual ground conditions. Examine the figure below to see what I mean. One inch (2.5 centimeters) is equivalent to fifty feet (50 meters), as seen in the lower left corner (15 m). We’ve determined that the septic tank should be roughly 13′ (3.96 m) away from the home by using a ruler to measure the diagram. We should broaden our search area to include anything from 10′ (3.05 m) to 20′ (3.05 m) because the sewage drain pipe was going to be put at an angle (6.1 m).
4B. If it’s Plastic or Fiberglass, Probe Gently
Septic tanks made of plastic or fiberglass are typically buried one to two feet (0.3 to 0.91 m) below ground level. They feature circular covers made of green or black plastic that are roughly two feet (0.91 m) wide and have a diameter of around two feet (0.91 m). Due to the fact that these tanks are totally made of plastic, a metal detector will not be of use in locating them. In this situation, a soil probe is really useful. An inexpensive soil sampling instrument, soil probes are comprised of a 4′ (1.2 m) metal rod with a pointed tip on one end and are used for soil sample.
Gently poke the earth with a soil probe every 2 to 3 feet, using a light touch (0.61 to 0.91 m).
The use of a soft touch is essential here, since the metal tip of the probe can cause damage to plastic septic tanks (and sewage lines) if too much force is used.
5. Time to Dig
Following the placement of an amagnetic locator (or the probing of the ground) to record the places with the highest signal strength, you are ready to begin digging. Septic tank lids can be located anywhere from 4″ (10 cm) to 4′ (1.2 m) below the surface of the ground.
6. Mark the Location for Future Maintenance
Having discovered your septic tank, you’ll want to ensure that it can be readily detected and accessed in the event that it has to be repaired or replaced. You may accomplish this by installing a septic tank riser. Sewage Tank Risers are devices that provide for easy access to the septic tank from the ground. They are shafts made of plastic or concrete that link the top of the tank to the surface of the ground below the tank. The tank lid will no longer require you to dig to access it whenever maintenance is required.
Common Septic Tank Facts
Septic systems are a low-cost and frequently successful alternative to conventional sewer systems. Concrete tanks have been the most frequent since the 1940s, with 3 – 500lids for a 1000 gallon tank and 4 – 500lids for a 1500 gallon tank being the most typical. Tanks began to be equipped with 16″ square concrete plugs with a lifting bail in the late 1990s, allowing for easier access to both sides of the tank. Many tanks today are made of fiberglass or plastic. Over time, the concrete might degrade, and the lids may develop cracks or possibly shatter completely due to the pressure.
- Even broken lids should be replaced for the sake of the public’s safety.
- They get access to your septic tank by removing green covers that are 20 inches in diameter.
- This is done in order to prevent anyone, especially children, from removing a lid and falling into the container.
- A typical water level for a tank should be 6″ below the top of the tank, and the tank should be kept completely filled at all times.
- The level of the water is often a good sign of potential problems.
- Additionally, it might suggest a clogged intake line, which could be caused by roots, a damaged pipe, or a loose joint.
- If there has been a lot of rain, the earth may get saturated, making it impossible for any additional water to seep through the soil to the surface.
- If your tank has allowed particles to enter the field lines, this might cause the openings in the corrugated pipe to get clogged, preventing water from percolating through the soil as effectively as it should be.
An output filter may be placed to prevent particulates from entering the field lines, but it would need to be cleaned on an annual basis to ensure that this does not happen. Nonetheless, it is far less expensive than rebuilding field lines.
Proper Access Opening for Septic Tank Pumping
Pumping of the septic tank must take place through the septic tank lid ports in order to be effective. The only method to completely remove all of the waste from the tank is to thoroughly agitate the tank, which will remove both the water and the solids that have accumulated inside the tank. This is done in order to eliminate anything and everything from the tank! If someone is pumping through a clean-out or inspection port, they are not conducting a full cleaning job, according to industry standards.
Pumping vs. Cleaning Your Septic Tank
The sale of a pumping service and a cleaning service is offered by several businesses. BE EXTREMELY CAREFUL. The pumping service will only remove water from the ground; no solids will be removed. The fact that many people feel they only require that servicing every few years makes this a terrible waste of money, and it really causes more harm to the system than good. When the solids compress and pour into the disposal field, it might result in the field failing or requiring very expensive repairs.
Only through the septic tank’s lid holes can a proper cleaning service be conducted, according to the manufacturer.
There is just one service that you will ever require: a complete pumping and cleaning service.
Priority Pumping’s septic tank pumping service will ALWAYS include the removal of all of the liquid and sediments that have accumulated inside the tank.
How Many Lids Does My Septic Tank Have?
Most of the time, these lids are situated beneath the surface of the earth, and excavation is necessary to discover and expose those lids. Some tanks will only have one lid opening, while others will have two or three. How do you know what you have in your tank? The answer to this question is based on the year in which your septic tank was installed. From 1960 to 1970, the coffin lid was the most common type of lid. This will need further excavation in order to move the lid and pump. 1970s through the 1990s*: These septic tanks are normally one-compartment tanks with a manhole in the center that is 18 inches in diameter.
Years 2000–present: These tanks MIGHT additionally include a filter in the back chamber that has to be cleaned.
What If My Septic Tank Has Risers?
Septic tank “risers” come in a variety of shapes and sizes. The correct risers from which we may pump are composed of a polymer or concrete, depending on the use. Their mounting will be done immediately on the lids of the septic tanks, which is a good idea. The green and tan lids seen in the illustration above correspond to the correct pumping ports on the device. Because we will have to excavate and expose the septic tank lids if you do not have these types of risers, we will be forced to pump your septic tank.
- We’re going to be as cautious as we possibly can.
- It is possible for Priority Pumping to assist you with installing septic tank risers if your tank does not presently include any, but you would want to have them installed in your septic tank during the pumping service.
- You may either indicate this while arranging your appointment, or you can always chat with our professionals when they arrive at your home to do your service if you have any questions.
- Do you still have questions about pumping your septic tank?
- Call or text our office at 602.601.5751 if you have any questions.
It is more than a pump job when you hire Priority Pumping as your contractor! We like educating our customers about their systems and assisting them in developing a good maintenance plan that will keep their systems happy and healthy for years to come.
Septic System Frequently Asked Questions
A variety of septic tank “risers” are available for purchase. Pump risers are built of either polymer or concrete, depending on the use. Their mounting will be done immediately on the lids of the septic tanks, which is a good thing. Pumping ports are shown by the green and brown lids in the illustration above. Because we will have to excavate and expose the septic tank lids if you do not have these types of risers, we will have to pump your septic tank manually. Many people do not want to disturb the grass in the surrounding region, but it must be done anyway.
- Considering Adding Septic Tank Risers to Your System?
- Riser installation is something we do for our customers.
- A few pumping operations will generally be enough to recoup the expense of the risers.
- Having trouble figuring out what you need to do with your septic tank?
- Whenever you have a question or need something clarified, please let us know.
- We like educating our customers about their systems and assisting them in developing a good maintenance plan that will keep their systems happy and healthy for many years to come.
What is a Drainfield?
The drainfield, also known as the leach field, is the area where the water from your septic system is sent after it has been cleansed and filtered. It is necessary to construct a drainfield in order to ensure that water is distributed uniformly back into the soil.
How do I find my septic system?
If you’re fortunate enough to have a contemporary septic system in your yard, it may be equipped with an access lid that is visible from the ground floor. If this is the situation at your residence, locating your septic system is as simple as taking a few steps into your backyard. It’s unfortunate that this isn’t true for older septic systems. It’s possible that you may locate an older system in your home by checking for greener, faster-growing grass or even an area with less growth than the rest of your yard if you live in an older home.
This will show you exactly where your septic system is located in your yard, if you have one.
You’ll need to look for the location where your septic system’s sanitary line exits your home and follow that line until you find your septic tank, which will take some time.
If everything else fails, contact a septic installation company. If you are unable to discover your septic system, your yard may need to be dug up by a septic system installation in order to locate your septic tank as a last option.
How long do septic systems last?
Septic systems are not designed to endure for a specific number of years, thus there is no defined time frame. In the event of adequate maintenance, you may expect your septic system to last several decades before it has to be replaced; but, if your system fails or deteriorates as a result of bad care, its lifespan will be drastically diminished. In order to obtain an accurate estimate of how much longer the life of your septic system may be extended, you must first have it checked thoroughly by an experienced septic system installation or repairer.
What’s the advantage of installing a newer septic system rather than an older system?
Although it is not required to install a new system, there are advantages to having a modern septic tank rather than an older one. For starters, when you get a new septic tank, you can be confident that it will serve you for decades if it is properly maintained, and you will not have to worry about it being “too old.” Additionally, newer systems have been modified to reduce the likelihood of your system becoming clogged, and if something does go wrong with a new system or when it comes time to have your septic system pumped, a new system will likely be easier to locate because they are frequently constructed with ground-level lids.
New septic systems also provide a further treatment for your waste water, allowing it to be cleaner before it is released into the surrounding environment.
How much does a new septic system cost?
Installation of new septic systems may be a significant financial commitment, with costs typically reaching tens of thousands of dollars. Whenever you have to replace an outdated septic system, you should look into financing alternatives that will make it simpler for you to pay for a new septic system in the long run. Purchase further information from a septic system installation business on how to obtain septic systems at the most competitive prices while also taking advantage of low-interest financing options.
How big is my septic tank?
Septic tank capacity is determined by the amount of water consumed in your property as well as local codes and requirements. Check with your local health agency to find out how big your tank is before installing it.
Why should my septic system be pumped out?
Without regular pumping, the gases emitted by human waste accumulate in your septic system, increasing the risk of septic tank damage and the need for more frequent pumping. The regular pumping of your septic system will allow you to limit the rate at which your tank deteriorates and save money in the process. It’s crucial to remember, though, that degeneration is unavoidable in the long run.
It is only via regular maintenance, such as pumping your tank, that your septic system will survive longer. It is recommended that you pump your septic system around once every 2-3 years if you want to prevent having to pay for a whole new tank.
Does my tank need to be dug up to know if it needs to be pumped?
Risers are commonly found in newer septic systems, which allow you to access your tank from the ground level through a lid. It is straightforward for any septic system professional to determine whether or not your yard has risers placed, and whether or not it is necessary to pump it. If, on the other hand, your tank cannot be accessible from the ground level, it will need to be dug up in order to determine whether it has to be drained. Instead of inspecting your septic system to see whether it needs to be pumped on a regular basis, set a timetable for having your system pumped every 2-3 years.
Why should I have risers and lids installed on my septic system?
As a result, when it comes time to find, pump, or repair your septic system, risers are the best choice since they provide ground-level access to your system. Having a septic system lid will allow you to mow your grass while still being able to find your system with no difficulty. Lids and risers also have the advantage of being accessible all year round, as opposed to earlier septic systems that could only be accessed by digging a trench through your yard. If your septic system has to be pumped or repaired for any reason during the winter months, getting beneath layers of frozen earth can be difficult, if not impossible, and you may be forced to wait until the spring to have access to your tank again.
How often should my septic system be pumped out?
A typical septic system contains a 1,500-gallon tank, which needs to be pumped around every 2-3 years for a household of four, according to industry standards. If you have less than four people living in your house, you will most likely be able to pump your septic system every five years rather than every three. You should speak with your local health agency to determine the exact size of your tank, and you should consult a septic system business to determine how frequently your tank should be pumped based on the size of your family and the size of your septic tank.
Do I need to have the septic tank pumped if I’m selling my house?
Consult with your local health department to learn about the restrictions that apply to your region of residence. Generally speaking, as long as your septic system has been pumped on a regular basis by a licensed septic system company and recently enough for the new homeowners to be able to live there for a year or two without having to pump the septic system, you should not be required to have it pumped again in the near future.
How do I find someone to pump my septic system?
It is important to be aware that not all septic system businesses are licensed and that not all firms properly dispose of or recycle the waste they pump from your septic system when you are looking for one to pump it. Finding a firm that complies with EPA standards should be your first concern, and then you should look at price, how pricing is split down, and which company is delivering the most honest, economical, and dependable service should be your next consideration. Investigate business evaluations, and when you select a septic system provider to pump your septic tank, be certain that they do the work properly, leaving enough water and waste to keep the sewage decomposing while leaving no visible trace more than a few inches of waste behind.
You may obtain a list of qualified pumpers by contacting your local health department or by searching online for septic pumpers that have websites that clearly show their certificates and qualifications.
How much does it cost to have my septic system pumped?
It is recommended that you call many pumpers before making a selection, and that you ask as many questions as possible to ensure that you are receiving the best service for your money. Pumping may cost upwards of $200, so it is always wise to shop around before making a decision. You should not consider it a waste of money to have your septic system pumped when the time comes. By correctly maintaining your septic system, you may avoid spending tens of thousands of dollars to replace your septic system long before it should have been replaced in the first place.
What happens if I don’t have my septic system pumped?
The sediments will pile up in your septic tank if you don’t pump it out regularly, ultimately overflowing into the drain field and clogging the drain field. Backups can occur, causing damage to your property and even necessitating the replacement of your drain field, which can be a very expensive error.
I just had my septic system pumped. Why is it full already?
Septic systems are designed to refill rapidly since the purpose of pumping is not to remove water but rather to remove non-biodegradable waste, and the water itself is not the aim of pumping. Once your septic system has been pumped and you begin to use the water in your house, your tank will quickly refill in order to maintain good operation of the system. If the water level rises to a point where it is above the outlet line, contact your septic system service provider for assistance immediately.
What do you look for when inspecting my septic system?
When we do an inspection, we make certain that your septic system is in good operating condition and that it satisfies the standards for receiving a Certificate of Compliance. If you’re planning to sell your home, you should have your septic system checked out by a professional who is certified by the Minnesota Pollution Control Agency. This will allow you to sell your home faster and for more money, if you can prove that your system has been checked out by an accredited professional. The level of liquid in your septic tank will be checked, and we’ll make sure there is no surface-level discharge.
The drains in my home aren’t draining as quickly as they normally do. Does this have to do with my septic system?
Drains that are clogged and that empty slowly are not necessarily a big source of concern. Before presuming that there is an issue with your septic system, check sure that there isn’t anything obstructing your drain first. In the case of one plumbing fixture in your house that is draining slowly, it is likely due to clogging; however, if all of the drains in your home are slow or leave waste backed up, it is probable that your septic system requires inspection and may even require pumping.
What happens when my septic system fails?
Symptoms of a failing septic system may include minor issues such as drain breaks or pipes that have been stopped, which can be caused by tree roots intersecting with the system. Septic system failure, on the other hand, might indicate that your septic tank has degraded to the point that it cannot be repaired and must be replaced. A blocked drainfield will hopefully not become your problem because it is the most expensive component of your system to replace; nevertheless, if it does, you must act quickly to make the necessary repairs or else your waste will continue to back up, perhaps causing damage to your property.
A blocked drainfield is likely the reason of your sluggish draining pipes, damp yard above your tank or drainfield, sewage stench coming from your yard, or tainted well water. You’ll need to replace the drainfield as soon as possible to avoid further pollution of drinking water sources.
How do I prevent my septic system from failing? How can I properly maintain my septic system?
Your septic system should degrade at a normal rate over the course of several decades if you maintain it on a regular basis. Maintenance normally consists of getting your septic system pumped on a regular basis and making certain that you do not flush or wash anything down the drain that might block your septic system.
What shouldn’t I flush down the toilet?
As a general rule, only human waste and toilet paper should be flushed. There are several reasons why flushing medicine down the toilet is not a good idea. First, medication might kill some of the bacteria in your septic tank, which is necessary to break down solid waste. Second, drugs can pollute adjacent well water. In addition, you should avoid flushing feminine hygiene items, paper towels, tissues, hair, cat litter (even if it is flushable), diapers, wipes, condoms, cigarettes, and anything else that seems to be inorganic and shouldn’t be flushed down the toilet.
What shouldn’t I pour down the drain?
Human waste and toilet paper should be the only items flushed, as a general rule of thumb It is never a good idea to flush medicine down the toilet since medication will kill some of the bacteria in your septic tank, which is necessary for the breakdown of solid waste, and drugs can pollute adjacent well water. In addition, you should avoid flushing feminine hygiene items, paper towels, tissues, hair, cat litter (even if it is flushable), diapers, wipes, condoms, cigarettes, and anything else that seems to be inorganic and shouldn’t be flushed.
Is using a garbage disposal bad for my septic system?
As a general rule, only human waste and toilet paper should be flushed down the toilet. Flushing medicine down the toilet is never a smart idea since medication can kill some of the bacteria in your septic tank, which is necessary for the breakdown of solid waste, and drugs can also pollute adjacent well water. You should also avoid flushing feminine hygiene items, paper towels, tissues, hair, cat litter (even if it is flushable), diapers, wipes, condoms, cigarettes, and anything else that seems to be inorganic and shouldn’t be flushed down the toilet.
Should I add bacteria to my septic system?
As a general rule, flush only human waste and toilet paper down the toilet. Flushing medicine down the toilet is never a smart idea since medication can kill some of the bacteria in your septic tank, which is necessary for the breakdown of solid waste, and drugs can pollute adjacent well water. You should also avoid flushing feminine hygiene items, paper towels, tissues, hair, cat litter (even if it is flushable), diapers, wipes, condoms, cigarettes, and anything else that seems to be inorganic and shouldn’t be flushed.
There’s a strong sewer odor outside of my house. Could this be my septic tank?
Strong sewage stench coming from your yard might be coming from your septic system, but it could also be coming from someplace else completely. Identifying the source of the smell is important. Check for propane or gas leaks in your home before concluding that your septic system is at fault; however, if your gas or propane lines are not leaking, determine how long it has been since you had your tank pumped, and whether there is any sewage waste in your yard or other signs of septic system failure before making your final decision.
Can my septic system contaminate nearby water?
It is possible for your septic system to pollute surrounding water sources if it is not properly managed or fails completely. In the event that you suspect that your septic system is failing, make sure that it is routinely pumped and inspected by an expert.
My gutters’ downspouts drain into my yard above my septic system. Is this a bad thing?
The drainage of your gutters into your yard above your septic system, and particularly into your drainfield, can be hazardous to your septic system. All water should be diverted away from your septic system in order to minimize flooding and damage to your septic system’s tank or drain field.