- Although not all states require contractors who install, repair or inspect septic systems to be licensed, the state licensing boards for those that do vary in their requirements. In Texas, for example, different licensing levels authorize septic system professionals to perform specific tasks.
Can a homeowner install a septic system in Texas?
It is legal under Texas law to install your own septic tank. However, certain systems cannot be sold to property owners individually and must be sold to factory representatives. Exceptions to this rule are licensed electricians and the person who delivers the tank or septic system to the installation site.
Can I install my own septic system in Illinois?
To install a new septic system in Illinois you must be recognized as an individual who has a career in the wastewater treatment field. The examinations are mandatory and once you are successful at the higher level, you’ll be qualified to install septic tanks across the state.
Can I install my own septic system in Ohio?
The state and local department of health will charge up to $75 for a permit to install a new system, and $34 to alter a system. An operation permit will now be required for all homeowners. Local health districts will set the amount and length of the operation permit, which can vary between one and 10 years.
Can you install your own septic system in California?
In California, a homeowner must obtain a septic tank permit from the California State Water Board before installing a septic system on his property. Septic systems must be installed by either a qualified professional or by the homeowner, and must pass inspection by the water board before use.
Do I need permission to install a septic tank?
The short answer is yes. You will need planning permission from a local authority in order to have a septic tank installed, no matter if it’s at your own home or on a business site.
What is required by State of Texas for a company can install septic systems?
With a few exceptions, a permit is required to install a septic system in Texas. The Legislature, in the Health and Safety Code, designates the Texas Commission on Environmental Quality (TCEQ) as the official agent to investigate and decide whether to approve a permit request.
What is a private sewer system?
private sewer means any part of a sewer system which collects wastewater from one building and crosses another property or travels along a street right of way or from more than one building and is not considered a public sewer.
Can you have a septic tank without a leach field?
The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.
Are septic holding tanks legal in Ohio?
(b) The director may allow a holding tank to collect, hold or store both industrial waste and sewage provided the following: (i) The maximum daily flow of sewage flow into the holding tank does not exceed twenty-five gallons per day.
How much does it cost to install a septic system in Ohio?
On average, the cost of installing a new septic tank system is $3,900. The price ranges from $1,500 to $5,000 for a typical 1,250-gallon tank, which is an ideal size for a three- or four-bedroom home. This cost is inclusive of the tank itself, which costs $600 to $2,100 or more, depending on the type.
Are plastic septic tanks legal in California?
California Septic Tanks Save up to 50% on plastic septic tanks. These septic tanks are state approved for use in the state of California.
How close can you build to a septic tank in California?
Common guidelines require at least 50′ clearance distance between a well and a septic system tank or 150′ between a well and a septic drainfield or leaching bed but you will see that different authorities may recommend different distances. Local soil and rock conditions can make these “rules of thumb” unreliable.
How long does a septic tank last in California?
A well-serviced septic system can last 30 years (possibly 40 or 50) and save you money, trouble, and headache.
Certification Requirements for Septic Tank Installation
A septic tank is a system that is meant to dispose of sewage in a safe manner. When sewage waste material is generated in rural regions, it is digested in a big tank by the action of anaerobic bacteria rather than being transported to a waste water treatment facility. The majority of septic tanks are built to function using a continuous flow approach and feature a two-part construction, with the top compartment used for settling sewage and the bottom compartment used for anaerobic disintegration of sludge in the lower compartment.
Installer Certification or Licensing
Most states require that plumbers and other professionals who build or repair septic tanks be licensed or qualified before they can work on the system. A number of septic-system-related certifications are available in several states, including Texas. The Texas Commission on Environmental Quality lists residential, commercial, and drip-emitter system certifications as examples of what may be obtained. Installation, cleaning/repair, and dismantling of septic tanks are all subject to separate certification requirements in some states.
Septic Tank Professional Exam
For septic tank specialists to be able to build or repair septic systems, they must often pass a rigorous examination. The subjects included in the test vary from state to state, but they often include the following: minimum site requirements for septic tank installation, building standards, suitable connections and venting, waste disposal, and safety concerns. Septic tank professional examinations often include a review of state legislation on the issue, including enforcement measures such as fines for establishing septic systems without a valid permit or permit number.
Septic System Business License
According to the Minnesota Pollution Control Agency, certain states, such as Minnesota, require that septic system-related firms get an extra business license and bonding. It is common for businesses to be required to get and maintain liability insurance, as well as to pay yearly fees and provide documentation that at least one employee of the business holds a valid license or certification to undertake septic system repair. If you are beginning a septic tank installation business, you should make certain that you have all of the necessary insurance and that any staff you recruit have had thorough background checks.
Septic Tank Installation Permit
It is necessary to get a permission from either a state or local government entity, or from both, depending on where you reside in order to build a septic tank. In most circumstances, once you have completed an application and paid the appropriate costs, an inspector will come to your location to inspect the planned site. As soon as your application is approved, you will be provided with a list of licensed septic contractors from which to pick. In most states, septic tank licenses are valid for a period of five years.
Payment of renewal costs, as well as participation in an inspection, are usually required for permit renewal in most cases. If something goes wrong when installing a septic system without a permit, both the workers and the homeowners are put at danger.
C-42 License: Sanitation Systems Contractor
Contractors that specialize in sanitation systems provide one of the most crucial services in the building sector. The following terms are sometimes used:
- Sewer contractors, septic system contractors, sanitation engineers, and waste management consultants are all examples of this type of work.
Sanitation systems that are in good working order are one of the most important aspects of modern life. The demand for effective sanitation systems has never been greater than it is right now, with 7 billion people on the earth and a population of 7 billion. Everything you need to know about C-42 licensing requirements, exams, study aids, and even how to fill out a license application will be covered in full in this post.
What is a Sanitation Systems Contractor?
“A sanitation system contractor is someone who designs, fabricates, and installs sewage disposal and drainage structures such as cesspools, septic tanks, storm drains, and other sewage disposal and drainage structures. Laying of cast-iron, steel, concrete, vitreous and non-vitreous pipe, as well as any other hardware related with these systems, is included in this categorization.” -CSLB.GOV For all bidders interested in the manufacture and installation of sanitation systems in the state of California, when the cost of labor and materials exceeds $500, the C-42 classification is the one that must be used.
Duties associated with the C-42 license
Contractors in the field of sanitation systems do a wide range of tasks, including the following:
- Storm drains, catch basins, septic tanks, and mainline sewers are all being installed. For industrial waste, seepage pits, drain fields, and clarifiers are being constructed. Water treatment systems are designed and built from start to finish. constructing brick manholes
- Water treatment system upkeep and repair for several types of water treatment systems
- Estimating, bidding, producing invoicing, and bookkeeping are all part of the job. Keeping the construction site safe
- Working in accordance with applicable environmental safety regulations
You will need to be familiar with all elements of sanitation systems if you want to be classified in the sanitation systems category.
The CSLB
Construction industry regulation is governed by the Contractors State License Board (CSLB), which oversees all contractors in the state of California. Their main role is to safeguard the general public by ensuring that anybody charging more than $500 for construction services is certified and registered with the state of California as a general contractor. The CSLB issues the C-42 license to contractors that meet the requirements. The CSLB conducts contractor license applications and tests, as well as maintaining a database of all active and inactive contractor license numbers that is available to the public.
General Engineering Contractor License
Sanitation businesses that possess a C-42 contractor license are frequently contracted in the context of public works projects. This means that they are being compensated with public monies in order to finish sewage system construction projects. In some circumstances, they may collaborate with a business or a property owner. Although they serve as subcontractors to General Contractors or General Engineering Contractors, they are frequently engaged to work on many projects over a long period of time as part of the general contractor or general engineering contractor’s team.
Learn more about the General Engineering Contractor License by reading this article.
How to get the C-42 license in California
In order to obtain a license as a sanitation contractor in California, you must first complete the following fundamental requirements:
- You must be at least 18 years old and possess a valid driver’s license or other government-issued identification from the United States. Have a Social Security number or ITIN number
- Not currently serving a probation or parole sentence
You must also have the following items:
- 4 years of experience at the Journey Level
- A Qualifying Individual who can vouch for your work experience and qualifications
- If the state requests for paperwork, you’ll need a means to demonstrate your previous work experience.
What exactly is a Journey-level experience, exactly? Experience at the journeyman level indicates that you have worked unsupervised full time for a sanitation firm or contractor who carries a C-42 license.
- A journeyman is capable of carrying out all of the responsibilities related with his or her profession.
A total of four full-time years over the preceding 10 years will be required by the CSLB. Years do not have to be consecutive, but they must total a total of four years in order to qualify.
Filling out the Sanitation Contractor License Application
As part of the application process, your Qualifying Individual will be required to offer a concise but precise summary of your expertise and abilities. The manner in which this description is written will be essential in determining whether or not your application will be approved. Example: “Tom is a wonderful man, and he just rebuilt our storm drain” is not sufficient description. Something along the lines of: “Ed has installed septic tanks, pre-cast manhole covers, catch basins, clarifyers for industrial waste, and drain fields” will be required by the CSLB.
Work experience for the Contractor License
You must be prepared to offer documents to back up your claims of previous work experience and education. The Contractors State License Board provides you with a number of options for demonstrating your experience.
- Documentation such as tax returns, check stubs, contracts, material order invoices or receipts are all acceptable.
Due to the large number of applications received by the CSLB each month, there is a significant probability that they will not document your experience; but, if you are one of the applicants who is selected for review, you must be prepared to produce documentation. The California State Lands Board does not accept photographs of projects. Processing of applications, fees, and criminal history checks are all included. Time required to complete your application and give you a test date is subject to change at any point during the calendar year.
- Application processing takes 6-8 weeks
- Waiting for an exam date takes 3-4 weeks.
I’ve seen circumstances where candidates were given a test date sooner than they expected, and situations where they were given a test date far later than they expected. The following are the most typical reasons why your application would be delayed:
- The time of year (processing time slows down during the holidays)
- The type of business
- History of criminal activity
- Demonstrating experience
- Making mistakes on your application
Application Costs for the C-42 License
The following are the current CSLB fees:
- There are several fees to pay, including the state application fee of $330, the license activation fee of $200 (after passing the test), fingerprinting, and a bond fee (what is a construction bond?).
Can you get a Contractors License with a Felony in California?
Having a criminal past in no way prevents you from obtaining a C-42 License in the United States. My own experience includes assisting men with a variety of criminal histories in obtaining numerous licenses. The most important thing is to be truthful on the application, even if the felony or misdemeanor occurred years ago and even if the conviction was expunged. BE COMPLETELY HONEST ON THE APPLICATION, because they will see everything anyhow when you submit your fingerprints for verification.
Keep in mind that it is their obligation to safeguard the general public. I have found that the majority of the time, people are more concerned about criminal accusations linked with: Fraud, Embezzlement, and Forgery.
California Contractor License Exam Prep
The test will consist of the following questions:
- In addition to 115 questions on contractor law, there are 115 questions on sanitation systems. Each section should take 3 hours to finish. Multiple choice exam administered with the use of a computer Book that has been closed
Recommended Resources
- Complete C-42 Home Study Program
- Introduction to Blueprint Reading
- OSHA Safety Certification Bundle
- Complete C-42 Home Study Program
Complete C-42 Home Study Program; Introduction to Blueprint Reading; OSHA Safety Certification Bundle; Complete C-42 Online Study Program;
- Sanitation system planning
- Sanitation system estimation
- Sanitation system design
2. Installation of a new septic system (26 percent )
- Testing and gradeing over septic systems
- Installing alternative treatment systems
- Specialty sanitation systems
- Installing leach lines and seepage pits.
3. Installation and repair of sewer laterals (10 percent )
- Sewage laterals are being installed
- Existing sewer systems are being maintained and repaired
Maintenance and repair of septic systems are important (10 percent )
- Existing septic systems are being troubleshooted
- Existing septic systems are being removed or repaired
- Keeping existing septic systems in good condition
5. The importance of safety (27 percent ) Locations of CSLB Examinations
- In accordance with your geographic region, the Contractors State License Board will assign you to a testing facility. The state test is not available online
- It is only offered in person. You are permitted to bring a pre-approved translator with you to the meeting. In the event that your application is successful, the CSLB will offer you an additional 18 months to pass both tests. If you fail the state test, you must wait three weeks before retaking it ($60 each retake). It will be necessary to get at least a 70% score to pass
Find out more about the CONTRACTOR LICENSE RULE! Practice Exams for the Sanitation Contractor’s License Here are some things to keep in mind:
- It is possible that the questions you may encounter on the test will employ out-of-date terminology. On the job site, processes and procedures may be radically different from those used in the office. You will be presented with questions pertaining to activities that you may have never done before. Questions will be presented to you as if you were in charge of a big-scale construction company with a huge number of personnel and many tasks taking place at the same time. Know everything there is to know about your trade
I have assisted a wide range of tradespeople from a variety of backgrounds and experience levels in obtaining their licenses. The majority of people are surprised by how different the subject matter on the state test is from what they have learned via years of hands-on practice. Make every effort to be as prepared as possible. Studies have shown that even a small amount of time spent studying each day on a continuous basis can significantly boost your chances of passing on the first try.
Construction Apprenticeships
There is no need to be concerned if you lack the 4 years of journeyman level experience necessary to earn a C-42 License. You’ve arrived at the starting point of your adventure. A highly specialized craft with an almost limitless amount of possibility exists in ornamental metalwork. Generally speaking, anybody interested in pursuing a career as a metalworks contractor should look into apprenticeship opportunities or seek out an experienced worker to learn from. Check read my essay on the difference between an apprentice and a journeyman for a more in-depth explanation of this procedure.
- Ability to interpret building plans is crucial for sanitation contractors working in the construction industry.
- The ability to quickly comprehend construction designs and carry out your responsibilities in a safe manner is an essential talent for any tradespeople, but it is particularly crucial for sanitation contractors.
- Consider taking advantage of our Free Blueprint Reading Course!
- Occupational Safety and Health Administration Construction is responsible for 21 percent of all work-related deaths, according to statistics.
- Falls, being struck by an item, electrocution, and being trapped in the middle are the most common causes of worker fatalities in the construction sector, according to the Bureau of Labor Statistics.
- It is normally essential that you have taken some level of OSHA training before being hired by a sanitation contractor.
The most important thing is to take action and follow these procedures through to the conclusion. If you found this article to be useful, please leave a comment below and be sure to check back for any new information.
How to Become a Licensed Septic System Contractor
LauriPatterson/iStock/GettyImages However, while not all states need contractors who work on septic systems to be licensed, the state licensing boards that do require contractors to be licensed differ in their criteria. Various degrees of license are required in Texas, for example, to allow septic system specialists to undertake specified jobs in the state. In addition to obtaining the necessary state and municipal business licenses, state professional licensing boards often demand successful completion of basic training courses, job experience, and the passing of a licensing examination before granting professional licenses.
Minimum Certification Requirements
LauriPatterson/iStock/GettyImages However, while not all states need contractors who work on septic systems to be licensed, the state licensing boards that do require contractors to be licensed have varying standards. Various degrees of license are required in Texas, for example, to allow septic system specialists to undertake certain activities in their field. Additionally, state professional licensing boards often demand successful completion of basic training courses, job experience, and the passing of a licensing examination in addition to getting all necessary state and municipal company licenses.
Septic Contractor Exam
A professional license or certification, as opposed to a business license, which permits a person to lawfully run a business, demonstrates that a contractor is informed about the regulations and laws governing his or her field of competence. Where state and local governments require septic system contractors to be licensed, passing the licensing exam demonstrates that a contractor has extensive experience, is proficient, and is qualified in the field of septic system installation and repair. According to state rules and federal regulations controlling private sewage disposal, inquiries in Illinois, for example, are based on these restrictions.
Additional Governmental Requirements
Professional licensing or certification is distinct from a company license, which permits a person to lawfully conduct commercial operations, and indicates that a contractor is informed about the norms and laws governing his or her particular field of expertise. Passing the licensure exam in states and localities that require septic system contractors to be licensed demonstrates that a contractor has a great deal of experience, competence, and knowledge in the industry. According to state rules and federal regulations controlling private sewage disposal, queries in Illinois, for example, are based on those restrictions.
Contacting their state’s public health agency, environmental health department, division of labor, or other appropriate licensing organization for particular information on certification and licensing training, tests, or other requirements is a good place to start.
Continuing Education
Septic contractors who wish to maintain their licenses must complete continuing education (CE) hours in addition to the credit hours required for them to sit for and pass the licensure test and become certified in many states, including North Carolina. Despite the fact that jurisdictions choose their own renewal dates, licensing authorities often need a specific amount of continuing education credits in order to renew certification. Contractors who wish to get credit for continuing education courses must provide confirmation that they have completed the requisite number of hours of authorized coursework.
Occupational Licenses: On-Site Sewage Facilities (Septic Systems)
Obtaining an on-site sewage facility license in the capacities of Designated Representative, Site Evaluator, Installer I and II, Apprentice, Maintenance Technician, or a Maintenance Provider is covered in detail in the following documents:
On-Site Sewage System (OSSF) Information and Requirements
View all of the information and requirements for occupational licensing and registration.
OSSF Licensing and Registration Overview
State Regulations:In order to work as an OSSF installation, apprentice, maintenance provider, or maintenance technician in Texas, you must be licensed or registered with the Texas Commission on Environmental Quality (TCEQ) prior to beginning work.
- DesignatedRepresentative License: This license must be issued by the TCEQ and must be used in conjunction with an authorized agent of the TCEQ. TCEQ-certified site inspectors conduct site evaluations (when it is part of their job duties), complaint investigations, system evaluations, and inspections of operating systems and software facilities that have been issued an authorization to construct in order to ensure that the OSSF’s installation meetsthe criteria established by the TCEQ, or by the Authorized Agent Order that has been approved by the TCEQ, whichever is more stringent
- Site EvaluatorLicense: Must be licensed by the Texas Commission on Environmental Quality (TCEQ) or have a Texas Professional Engineer license. He or she is authorized to conduct preconstruction site evaluations to determine the suitability of an existing or proposed OSSF system and to identify any features within or near the location where an OSSF system is to be installed that could be contaminated by the OSSF or that could interfere with the proper operation of the system. Septic tank installers are permitted to install standardOSSF systems, which include a variety of types of tanks and drainage systems such as absorption drainfields, unlined ET drainfields, leaching chambers, gravel-less pipe, and pumped effluent drainfields. Installer IILicense: a license that allows the holder to install all sorts of OSSF systems. ApprenticeRegistration: Approved to act as a representative of the supervisinginstaller on the project site However, they are only permitted to undertake OSSF installation services under the continual, direct supervision of a qualified installer, either on-site or by radio or other direct communication methods, as determined by the licensing authority. If there is no on-site supervision, the license installer must visit the project site at least once every day to ensure that the apprentice’s work is being completed in compliance with the requirements of the State or Authorized Agent. The maintenance technician registration program authorizes individuals to undertake activities related with OSSF maintenance, but only under the direct supervision and direction of the maintenance provider, either on-site or by direct connection with the maintenance provider
- And Aerobic treatment on-site disposal systems are covered by the Maintenance Providers License, which authorizes the provision of service or maintenance.
Return to the top of the page
OSSF Designated Representative License Requirements
- Educational Qualifications: There are no minimal educational requirements
- Work Experience: There are no work experience requirements
Training Course
TEEX is an OSSF-approved training program.
Application and Examination
- Submit an application and a fee ($111) to the Texas Commission on Environmental Quality
- Applicants who have a Designated Representative application that has been granted or those who need to retest may do the following:
- You can either register for a computer-based test (CBT) or register to take a paper-based test.
Note It is not permissible for Licensed Individuals to conduct any Designated Representative tasks until they have been hired by an authorizedagent. Return to the top of the page
OSSF Site Evaluator License Requirements
- Educate yourself: there are no minimum educational qualifications. Job Experience: There are no prerequisites for work experience. Applicants must have at least one of the following qualifications:
- Current Installer II license
- Designated Representative license
- Texas Professional Engineer license
- Texas Professional Sanitarian license
- Certified Professional Soil Scientist
- Or Texas Professional Geoscientist license in the soil science discipline
- Texas Professional Soil Scientist certification
- Or Texas Professional Soil Scientist certification
Training Course
TEEX is an OSSF-approved training program.
Application and Examination
Return to the top of the page
OSSF Installer I License Requirements
- Educational Qualifications: There are no minimal educational requirements
- Work Experience: There are no work experience requirements
Training Course
TEEX is an OSSF-approved training program.
Application and Examination
- Submit an application and a fee ($111) to the Texas Commission on Environmental Quality
- The following options are available to applicants who have an approved Installer I application or who need to retest:
- You can either register for a computer-based test (CBT) or register to take a paper-based test.
Return to the top of the page
OSSF Installer II License Requirements
- Education: There are no minimal educational qualifications
- WorkExperience: There are no work experience requirements.
The applicant must be in possession of an OSSF Installer I license for at least one (1) year and present any of the following documents:
- For OSSF I to II, a sworn statement from either a designated representative who approved theinstallations or from three individuals for whom the applicant performed construction services (statements cannot be provided by individuals who are related by blood or marriage to the applicant or applicant’s spouse)
- Or, other documentation of the applicant’s work experience approved by the executive director.
Applicants who hold an Apprentice Registration must have had the registration for a minimum of two (2) years and provide one of the following documents –
- When applying for Apprentice to Installer II, you must submit an asworn statement from either an authorized representative who witnessed theinstallations or the installer for whom the applicant performed construction services, whichever is greater
- Or, alternative documentation of the applicant’s work experience that has been approved by the executivedirector.
Training Course
TEEX is an OSSF-approved training program.
Application and Examination – Registered for the Course on or before December 31, 2020
- Submit an application and a fee ($111) to the Texas Commission on Environmental Quality
- The following options are available to applicants who have an approved Installer II application or those who need to retest:
- You can either register for a computer-based test (CBT) or register to take a paper-based test.
Return to the top of the page
OSSF Apprentice Registration Requirements
- Educational Qualifications: There are no minimal educational requirements
- Work Experience: There are no work experience requirements
Training Course
- Submit an application and a fee ($111) to the Texas Commission on Environmental Quality
Return to the top of the page
OSSF Maintenance Technician Registration Requirements
- Educational Qualifications: There are no minimal educational requirements
- Work Experience: There are no work experience requirements
Training Course
The Texas On-Site Wastewater Association is a non-profit organization dedicated to the prevention and treatment of on-site wastewater.
Application
- Applicants must finish the training with TOWA (409-718-0645) before submitting an application to the Texas Commission on Environmental Quality. Submit an application and a fee ($111) to the Texas Commission on Environmental Quality
Return to the top of the page
OSSF Maintenance Provider License Requirements
- Education: There are no minimum educational requirements
- Work Experience: There are no work experience requirements.
- Be in possession of a Class C or higher Wastewater Treatment Operator license
- And Be in possession of an OSSF Installer II license. possessing three (3) years of experience as a certified Maintenance Technician
- Or possessing previous to September 1, 2009, registration as a Maintenance Provider
Training Courses
The Texas On-Site Wastewater Association is a non-profit organization dedicated to the prevention and treatment of on-site wastewater.
- BasicMaintenance Provider (BMP) Course
- AdvancedAerobic Maintenance Provider (AMP) Course
- BasicMaintenance Provider (BMP) Course
Application and Examination
- Prior to submitting an application with the TCEQ, applicants must have completed the BMP course and be registered for the AMP course with TOWA (409-718-0645). The TCEQ requires that you submit an application and a fee ($111) at least 30 days ahead to the planned AMP course in order to be eligible to test at the completion of that course. The following options are available to applicants who do not intend to test at the completion of the AMP course and who have submitted an approved Maintenance Provider application, as well as those who require a RETEST:
- Take a Computer-Based Test (CBT) or a Paper-Based Test by registering online.
Return to the top of the page
OSSF Licensing Exemptions
For a complete list of exemptions, please see 30 TAC 30.244. Return to the top of the page
Renewal Requirements
Permits and registrations for occupations are valid for a period of three years. A renewal application and criminal background attestation, as well as payment of the renewal cost, must be submitted by candidates who have fulfilled the CErequirements (if applicable). A comprehensive list of details may be obtained on the newal website. In order to be eligible for renewal, all On-Site Sewage Facility licenses, with the exception of the Apprentice and Maintenance Technician registrations, must have completed 24 hours of Continuing Education (CE).
Hours of continuing education (CE) must be earned prior to the expiration of the license, and they may be earned at any time within the license’s active cycle. To see the number of CE hours currently obtained, visit theLicense Information website. Return to the top of the page
Septic Contracting Frequently Asked Questions
In Florida, who has the authority to do work on a septic tank?
- A homeowner can only perform septic work on his or her own single-family residence that is occupied by him or her. A state plumber who is licensed pursuant to Section 489.105(3)(m), Florida Statutes
- A septic tank contractor who is registered pursuant to Part III of Chapter 489, Florida Statutes, and Part III of Rule 64E-6, Florida Administrative Code
- And a septic tank contractor who is licensed pursuant to Section 489.105(3)(m), Florida Statutes.
Is experience gained under the supervision of a qualified plumber equal to experience gained under the supervision of a certified septic tank contractor? Is it possible to obtain approval if an applicant can demonstrate that septic tank contracting services were performed under the supervision of a state plumber licensed pursuant to Section 489.105(3)(m), Florida Statutes? Is a state-licensed plumber exempt from the requirements of Chapter 64E-6, Florida Administrative Code, regarding septic tank installation permits, inspections, and other procedures?
The only requirement that the state licensed plumber not violate is the obligation to register as a septic tank contractor.
Is septic tank work experience gained outside of the state admissible for the purpose of qualifying for the septic tank contractor registration examination?
According to the definitions in this section, an equivalent examination means that at the very least the following topics were tested and passed: system location and installation; site evaluation criteria; system size determinations; disposal of septage; construction standards for drainfield systems; and the USDA soil textural classification system.
- When it comes to qualifying for the septic tank contractor registration examination, is employment experience in septic tanks recorded with an IRS Form 1099 considered acceptable?
- The Internal Revenue Service Form 1099 is used to document non-employee pay for services provided.
- When and where are septic tank contractor registrations made available to the public?
- Exams will be held from 9:00 a.m.
- on Tuesdays and Thursdays.
- No.
- Is it possible to face repercussions if you provide or provide septic tank contracting services without first obtaining a registration and business permission from the department?
Individuals and businesses who execute or supply services without the advantage of a business registration and/or a business authorization may be liable to administrative proceedings, citations, penalties, and other legal actions.
No.
It is permissible for a licensed septic tank firm to advertise under several (more than one) trade names.
Septic tank businesses that have been approved by the department may only advertise under the business name that has been approved by the agency.
An authorized business organization that loses its qualifying contractor has 60 days from the date the qualifying contractor left the business to find another qualifying contractor.
The certified septic tank contractor may fulfill any existing and ongoing (cyclical) contracts that were executed previous to his or her departure from his or her approved business during this period.
Private organizations that provide continuing education courses are the most common providers (i.e., Florida Onsite Wastewater Association, Florida Environmental Health Association, etc.).
The certificate of business authorization can be waived for a licensed septic tank contractor, although this isn’t guaranteed.
A registered contractor who operates as a sole proprietorship and offers septic tank contracting services under his given name is free from the requirement to obtain a business authorization certificate.
If John Doe’s wife Jane were to become a co-owner, a fake name would need to be registered with the court and a certificate of authority would need to be obtained.
If you are exempt from filing with the Department of State for a fake name, you are also excused from obtaining a certificate of authorisation from the Department of Justice.
Yes. Registered septic tank contractors (as well as state-licensed plumbers) are permitted to pump septic tanks if they have a suitable active service permit from their local county health authority in place. If you cannot find the information you want on this page, please contact us.
Septic System Construction Permit
If an individual or a property owner want to have a subsurface sewage disposal (septic) system constructed on their land or if they need to repair an existing malfunctioning system, they must get a Septic System Construction Permit from the City of San Diego. Septic System Assistance Division County Map (Division Septic System Assistance County Map)
What Information Must I Provide?
Applicant’s information can be submitted using the web portal*, and it includes the following:
- Identify the landowner’s name and address, as well as the location or site’s size and number of occupants (including number of bedrooms), water consumption amounts, whether there is an excavated basement, whether there are basement plumbing fixtures, whether the house and lot have been staked, and the name of the installer (if any). Drawing showing the property boundaries, home site position, well location, spring location, planned roadway and utilities, and driving instructions to the site are included in this document. For large conventional or alternative systems, soil maps are created by a soil scientist (if necessary), and system design is completed by a licensed engineer.
*Please keep in mind that the Division suggests that you apply online in order to expedite the application processing. Paper applications, on the other hand, will continue to be accepted at the relevant Environmental Field Office. (CN-0971, Form CN-0971)
Helpful Lists:
- The Division of Water Resources is a division of the Department of Water Resources. CONSULTANTS APPROVED BY THE DEPARTMENT OF AGRICULTURE
- INACTIVE INSTALLERS- This list, grouped by county, covers those persons who have valid permits to construct, install, modify, or repair a septic system. It should be noted that installation permits are valid across the state, not only in the counties indicated. A separate permission may be required in contract counties such as Blount and Davidson counties as well as Hamilton and Jefferson counties as well as Knox and Madison counties as well as Shelby and Williamson counties. Individuals possessing valid licenses to remove (pump) household septage from septic tanks, holding tanks, portable toilets, or other similar sewage treatment or disposal facilities are listed on this page as “Active Pumpers.”
How Will My Application Be Processed?
Applicants should submit their completed application forms, along with the required application costs, to the Division of Water Resources at the relevant Environmental Field Office. The application is subjected to a thorough examination, and the applicant is notified when the examination is completed. The review procedure typically takes ten days, and it must be completed within 45 days of the day the application was submitted, unless an extension has been granted.
What Fees Are Required?
| New Conventional or Large Diameter Gravelless Pipe SSDS Permit | $400 up to 1000 gallons per day design flow$100 for each additional 1000 gpd flow | |
| New Conventional or Large Diameter Gravelless Pipe SSDS Construction Inspection | $100 | |
| New Alternative SSDS Permit | $500 up to 1000 gallons per day design flow$150 for each additional 1000 gpd flow | |
| Alternative SSDS Construction Inspection | $200 | |
| Experimental SSDS Permit | $500 | |
| Repair Permit | No permit fee | |
| Repair Construction Inspection | $100 |
What Are My Rights and Responsibilities After the Permit is Approved?
The applicant has the authority to carry out the activities that were granted in the permission application. They are responsible for notifying the Department of any changes to the information in the application. The applicant is responsible for complying with any state legislation and regulations that may be applicable. A system’s installation must be reported to the Division by the applicant or installer of the SSDS so that it may be examined and certified as compliant. Applicants who have had their permits rejected, suspended, or cancelled have the opportunity to file an appeal with the appropriate authority.
What Are the Division’s Rights and Responsibilities After the Permit is Approved?
During each SSDS installation, the Division inspects the system to confirm that it was installed in line with the permit conditions and regulatory requirements. In the event that an applicant fails to comply with state legislation or departmental rules, the Division has the authority to revoke, suspend, or refuse the issue of a permit. Any individual who violates or fails to comply with state legislation, rules, or regulations may be susceptible to civil fines as a result of their actions.
Whom Do I Contact For Applications, Assistance and Other Information?
Applicants can obtain applications and information from the Environmental Field Office that is most convenient for them.
Applicants may refer to the following publications for further information:
- TDEC Rule 0400-48-01: Regulations to Govern Subsurface Sewage Disposal Systems
- TCA Section 68-221-401.414: Subsurface Sewage Disposal Systems
- TDEC Rule 0400-48-01: Regulations to Govern Subsurface Sewage Disposal Systems
Contractors – District Health Department 10
Individuals who wish to install private wells or septic systems must obtain permission from the District Health Department10. DHD 10 will conduct an evaluation of the site, design the septic system, select the location for the well installation, and verify the completed work. Individuals are permitted to build their own septic systems in their homes. District Health Department10 must provide a license to all other businesses. The owner or contractor must call the local sanitarian at least twenty-four hours before covering or back filling a septic system in order to do a final inspection.
It is recommended that you pump your septic tank every 3 to 4 years by the District Health Department10.
Quicklinks
Code de la Santé MI DEQ stands for the Michigan Department of Environmental Quality.
Forms
Fee Schedule for Well and Septic Application in 2022 Contractor Affidavit FormSewage Disposal Contractor RegistrationSewage Disposal Contractor Registration The ApplicationBuilding Permit Authorization Application is a type of authorization application.
Commercial WellSeptic
Septic systems that produce less than 1000 gallon per day (gpd) may be subject to inspection under the District Health Department10’s local sanitary code requirements. Using the Michigan Criteria for Subsurface Sewage Disposal, all commercial septic systems with a capacity larger than 1000 gpd but less than 10,000 gpd are subject to inspection. The vast majority of commercial wells fall into one of two categories: Type II public water supplies or Type III public water supplies.
Quick Links
MI DEQ stands for the Michigan Department of Environmental Quality. Water Supply that is not provided by a community
Forms
Fee Schedule for the Year 2022 Construction of a Well and Septic System Contractor Affidavit FormWastewater Disposal Contractor Registration The ApplicationBuilding Permit Authorization Application is a type of authorization application.
Soil Evaluation
If you are considering acquiring a piece of land where a septic system will be installed, you should consider applying for a Soil Evaluation. In order to determine the kind of soils, the depth to seasonal high ground water, and the depth to confining layer, the sanitarian will visit the site and conduct soil borings on the land. All three of the factors listed above play a role in determining whether or not a property is suitable for the installation of a septic system.
Forms
More than 90 percent of the new septic systems constructed in our 10-county area are inspected by the District Health Department10. It is necessary for contractors and house owners to consult their local sanitarian at least 24 hours before covering the septic system.
Forms
Form for Making a Complaint
Septic Systems
- Approval of the construction project
- Approval for Operational Activities
- Application of Septic Tanks
Many changes to systems require Approval for Construction
Preliminary approval for construction must be obtained prior to converting a structure from seasonal to full-time occupancy, prior to increasing the load on an existing septic system, and/or prior to commencing any additions to a structure. Preliminary approval must also be obtained prior to replacing or expanding a structure, subject to the requirements of RSA 485-A:38, II-a.
An inspector will determine whether the system meets requirements
A New Hampshire Department of Environmental Services inspector will inspect and assess the newly constructed septic system to confirm that it has been installed in line with the objective of the authorized design. An electronic Approval for Septic System Operation will be completed once the inspector has decided that the system complies with all relevant regulations. A digital copy of the approval will be kept on file with the New Hampshire Department of Environmental Services. Inspectors from different regions
Guidance and permit applications for septic systems
In the case of any structure from which wastewater will be discharged on site and to which a water supply is or will be connected, a septic system will be needed to be installed. If your septic system is properly planned, implemented, and maintained, it should provide you with many years of trouble-free service.
The New Hampshire Department of Environmental Services (NHDES) provides instructions for filing applications, which can also be completed online through e-permitting. Locate the relevant apps.
Archive Records
Considering that the Subsurface Systems Act was enacted only in 1967, there are no records in existence if the building was built before 1967. The majority of the septic systems constructed within 1,000 feet of a surface water during the period 1967 to 1971 are included in the state records. The catalog of these records may not necessarily contain all of the information. From 1967 until 1986, the state’s records were exclusively comprised of paper documents. The municipality in which the structure is located may keep paper or electronic records of the structure’s history.
Make a request for an archive by filling out the form below.
Septic Systems
When it comes to on-site wastewater treatment and disposal systems, the most frequent term is “septic system.” Septic systems are wastewater treatment facilities that are placed inside your property limits. They collect, treat, and eventually dispose of wastewater from your house or company. Unlike a central or municipal wastewater treatment plant, which takes wastewater from many places and treats it on-site, this facility treats wastewater on-site. There are various parts that make up a septic system, including the tank itself, the distribution box, the dosing chamber, and the drainfield.
The septic tank is a tank that collects and partially processes wastewater from the home.
The gas is expelled into the atmosphere.
Find out more.
Types of Systems
Among the many services provided by the Groundwater Discharges Section are a list of approved septic system products as well as a list of approved innovative and alternative systems that may be used in situations where site constraints prevent the installation of conventional wastewater treatment systems.
Septic System Approval
There are three steps involved in getting your septic system authorized in Delaware. Each phase will be overseen by a licensed expert who will collaborate with the applicant and the Department, as well as submit the necessary application paperwork and expenses.
Site Evaluation
Have a professional Class D soil scientist do a site study to establish what sort of disposal system may be installed on the property in accordance with current rules. The soil scientist conducts fieldwork, writes a report on the site’s appraisal, and submits it to the Department of Agriculture for approval.
System Design
A qualified system designer should be enlisted in order to design the septic system and secure the necessary permits.
Class B designers should be used for gravity-based systems. Class C designers should be used for designed or pressure-dosed systems.
Installation
Septic systems are installed by Class E system contractors who are qualified to do so.
Managing Your Septic System
Conserving water can help you avoid difficulties and save money. More wastewater you send through your system, the longer it will survive. Shower for a shorter period of time and with a low-flow shower head. Use faucet aerators in the kitchen and bathroom sinks to make water flow more freely. Use your dishwasher and washing machine only when absolutely necessary. Low-flush toilets should be installed in your bathroom. Use toilet paper that is biodegradable. Many items are branded as “authorized for septic tank usage,” which means they have been tested and approved.
- In no case should you dump grease, paints, caustic or greasy substances, gasoline, cooking fats, or motor oils down the drain or into the toilet.
- Don’t put anything on top of it.
- Planting deep-rooted plants or bushes within 10 feet of your waste disposal system is not recommended.
- Never attempt to enter a septic tank on your own.
Record-Keeping is Important
Identifying the location of your septic system is critical for managing maintenance and repairs, as well as for safeguarding the system from damage. Maintain a central repository for all of your system’s data and information. The following information should be kept in your records:
- Copies of any licenses and correspondence pertaining to the system are required. a map or illustration of the system’s organization
- Complete records of all maintenance, inspections, and repairs are required. Receipts and records of all pumping activities performed on your system
Watching for Problems
A septic system that is not operating properly or has failed is a nuisance for you. It also poses a threat to public health. Repairing or replacing a faulty system will safeguard your family, friends, and drinking water from harm or contamination. Here are some warning signals to be on the lookout for: In the House of Commons Sinks and toilets that are draining slowly Back-ups in the plumbing system There’s a gurgling sound in the pipes. The Yard is a great place to start. Soil that is too wet or ponding over the system Grass is growing more quickly and becoming greener.
Please call the Groundwater Discharges Section at 302-739-9947 (in Dover) or 302-856-4561 (in Wilmington) if you have any queries (in Georgetown).
State Financial Assistance
The Septic Rehabilitation Loan Program provides low-interest funding to homeowners that want to replace failing septic systems and cesspools with on-site wastewater disposal systems that are both environmentally friendly and financially effective.
Aside from that, the program covers the expenses of new septic system construction as well as the expenditures connected with connecting to central sewage systems.
Septic Systems
Alternative treatment methods can be utilized to handle certain soil problems that make it impossible to establish traditional septic systems. Construction and maintenance of these structures, on the other hand, might be more expensive. When an ATU is appropriate for your project, a registered PR will be able to tell you. In order to operate ATUs in Riverside County, they must get an annual operating permission from this agency.
Percolation reports and OWTS certifications
This Department requires that all percolation reports and OWTS certifications submitted to it be completed in accordance with the Local Agency Management Program (LAMP) (LAMP). Percolation reports must be completed by a PR who has been authorized to do so. OWTS certifications must be done by a qualified service provider (QSP) or a qualified representative (PR).
Professional of Record (PR) and Qualified Service Provider (QSP)
OWTS-related percolation tests may only be performed by persons who have been taught and educated to perform, interpret, and assess the field circumstances and tests as they pertain to the OWTS program. The following credentials and registrations are required by the State of California for persons with experience in OWTS design and who have one of the following credentials and registrations: Engineer with a professional license (PE) Geologist with years of experience (PG) Environmental Health Specialist with a license to practice (REHS) Nobody may conduct percolation tests or submit reports on percolation in the unincorporated portions of Riverside County or its contracted cities unless they are registered with this Department as a percolation report submitter (PR).
To be considered for registration as a PR or QSP, you must submit the following documents as a full package:
- A completed QSP/PR Registration Application
- A copy of the most recent C-42, C-36, and/or Class A General Contractor’s License issued by the State of California, or proof of licensing or registration as a Professional Engineer, Registered Civil Engineer, Geologist, or Registered Environmental Health Specialist
- And The license must be in good standing with the organization that issued it. a copy of the driver’s license from the state of California
Submission procedures include the following:
- Completed package sent through email
- Packages must be delivered in person to the Downtown Riverside or Indio offices.
