Where To Buy Septic Tank Risers? (Solution)

What is the price of a septic tank?

How much do septic tanks cost? For a three-bedroom home, you can expect to need a 1,000-gallon tank, which will range in price from $8,000 to $15,000, according to AngiesList.com. For a

How much do risers for a septic tank cost?

How Much Does a Riser Cost? Septic tank risers are not only convenient, but they are also cost-effective if you plan to say in your home for several years. Plastic septic tank risers typically cost $300 to $400 to install, parts and labor included.

What sizes do septic tank risers come in?

Typical septic tank riser diameter is 24-inches but 30-inch, 16-inch and other riser diameters are available. Risers are sold in varying heights from 6″ and up.

Should I install a riser on my septic tank?

Having a riser in place can also significantly reduce the cost of septic tank maintenance over time through the ease of access and time on the job saved. Plus you will be spared digging up your lawn every time as well.

How many septic tank risers do I need?

A single riser is required for accessing the pump chamber for this type of system. If you don’t have two additional risers, you should locate your septic tank and install risers for both the inlet and outlet openings, as described above.

Do they make square risers for septic tanks?

The Polylok square riser adapter ring is designed to connect the Polylok septic tank risers or lids to an existing concrete tank with large square or round openings.

Should I bury my septic tank lid?

A septic tank stores the solids from drains and needs to be pumped out about every two years, so it’s not a good idea to cover the area — you need to always be sure where to find the tank. Modern septic systems have an 8-inch plastic pipe that rises from the tank to a few inches above grade.

How do you seal a concrete riser on a septic tank?

Seal the riser to the septic tank using the patch mix. You may finish sealing by adding Bentonite or casing sealer around the base, filling in gaps as needed. Make sure you then carefully secure the riser lid with the screws provided to avoid a safety hazard! All risers must be completely sealed to the septic tank.

Why does my septic tank have 2 lids?

Solid, watertight, buried tank made of concrete, plastic, fiberglass or metal. This tank has a way in (inlet), and a way out (outlet). So, most residential tanks should have (2) lids about 5′ away from each other. A septic tank holds all the liquid waste from your home (toilets, sinks, kitchen, bathtubs, floor drains).

How deep should a septic tank be buried?

In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground. You can use a metal probe to locate its edges and mark the perimeter. If you do not find the lid by probing, shallow excavation with a shovel along the tank’s perimeter should reveal the lid.

Can you pump a septic tank yourself?

Technically, you can clean a septic tank yourself. However, professionals do not recommend that you do so. A professional has the tools needed to properly pump your tank. A professional also has the knowledge and training to remove all of the waste from your tank and dispose of it properly.

Can you cover septic tank lids?

If you have a traditional septic system, the tank should be pumped every 3-5 years. That means that the septic lids should be accessible every 3-5 years. You can use almost any temporary, movable objects to cover your lids, like: Mulch (but not landscaping)

Septic Tank Riser Kits – Wholesale Septic Supply

Despite the fact that cleaning your own lateral line may appear to be a cost-effective option, there is always the possibility of causing damage to your pipes. If you have access to a sewer clean out, it is more efficient and less expensive to hire a professional plumber to complete the job. The reason for this is that they have more direct access, requiring less tools and less effort than if they had to dig up your yard or snake the lateral from a location within the house. With a basic estimate range of $99 to $900, and an overall average of $288, HomeAdvisorgives provides a reliable service.

In greater detail, CostHelper estimates that the cost of snaking your lateral will range between $148 and $900, with an average cost of $410 per foot.

Additional costs will include a video examination of the line, which will cost between $100 and $8,000.

Some plumbing businesses may quote you a fixed charge but then urge you to tack on extra services in order to raise the total cost of the work.

Why choose Tuf Tite Risers?

Even while cleaning your own lateral line may appear to be a low-cost solution, there is always the possibility of causing damage to the pipes. If you have access to a sewer clean out, it is more efficient and less expensive to hire a professional plumber to complete the operation. As a result, they use less tools and less effort than if they were required to dig up your yard or snake the lateral from an interior location. With a basic estimate ranging of $99 to $900 and an overall average of $288, HomeAdvisorgives can help you save money.

In additional detail, CostHelper estimates that the cost of snaking your lateral will range between $148 to $900, with an average cost of $410.

Additional costs will include a camera examination of the line, which will range between $100 and $800.

Some plumbing firms may quote you a set amount but then urge you to tack on extra services in order to raise the overall cost.

What are the Tuf Tite Product Specs?

Every riser system is simple to install on concrete septic tank lids, and the kit will even tell you what size access hole will work best with your septic system based on the information in the kit. The riser system is effective on 95 percent of septic systems with round diameter entrances ranging from 16 inches or less to 25 inches or less, and square sizes ranging from 11 inches by 11 inches to 18 inches by 18 inches. Looking for high-quality products? Look no further than this store! There are several sizes available for the Tuf Tite riser system, which has been engineered to last.

Septic tanks are normally installed below the surface of the earth.

Installing a riser kit is the most effective approach to deal with this issue.
When the riser comes into contact with the tank, an adapter ring should be used to seal the connection.
A number of risers will be stacked on top of each other and the adapter ring until they reach the ground level, at which point they will be removed.

This method will establish a barrier around the tank, protecting it from contamination while also making access to the tank more convenient.
In order to ensure that the circular riser will fit around your square or rectangular access port, there are a few things you may do.
The diagonal distance across the access will be the longest distance that a riser will have to cover before it may be used.

Assume that “a” is the length of one side of the port’s access.
For example, A is 12 inches in length and B is 12 inches in length.
The equations shown above can be used to estimate the diagonal distance of a rectangle in a rectangular coordinate system.

The only risers that should be utilized are those having an inner diameter that is bigger than the diagonal distance between the access port and the wall.

This approach will need the knowledge of the lengths of each side of your rectangular access port in order to work. Pythagorean theorem is something you may remember from your geometry training.

Septic Tank Risers, Lids, and Covers

Septic tank risers are intended to replace existing concrete, fiberglass, or metal septic tank lids by lowering the entrance to the ground level and allowing for better drainage. Want to stop digging up your yard every time you need to have your septic system cleaned, repaired, or re-filled with water? Do you despise having to lift and carry incredibly big concrete lids on your shoulders? It appears that you require septic tank risers to raise your access to ground level, as well as a lightweight, easily removable access cover.

With the Polylok risers and lids from Septic Solutions, septic tank maintenance will be a breeze!

Want to stop digging up your yard every time you need to have your septic system cleaned, repaired, or re-filled with water?
It appears that you require septic tank risers to raise your access to ground level, as well as a lightweight, easily removable access cover.
With the Polylok risers and lids from Septic Solutions, septic tank maintenance will be a breeze!

FREQUENTLY ASKED QUESTIONS

The following are some of the most commonly asked inquiries that our customer support representatives are asked. Take a peek below; it’s possible that the queries you have have been answered! Would the POLYLOK SEPTIC TANK LID fit directly on the ADAPTER RING, or will I need to use a RISER to ensure a proper fit on the tank? With the exception of the 24″ Heavy Duty Lid, the lid will often fit straight onto the adapter rings in the majority of cases. The underside of the 24″ Heavy Duty Lid is strengthened for added strength.

Therefore, the 24″ Heavy Duty Lid will only be able to be used without using an adapter when the opening is at least 24″ in diameter.
ALL other Polylok lids will attach straight to the adapter ring, eliminating the need for a riser or any other adaptor.

No.
Cutting the riser will result in the lid not being adequately secured on the riser that has been cut down.
It is entirely up to you whether you want to bring the riser system up to grade, raise it above grade, or leave it slightly below grade.

IS IT BETTER TO USE THE STANDARD LID OR THE HEAVY DUTY LID?
If the riser system is located in a high traffic location or is going to be run over by lawn equipment on a frequent basis, the heavy duty lid is recommended.
Yes.

IS IT INCLUDED WITH THE POLYLOK SEPTIC TANK RISERS AND LIDS TO USE SCREWS? Yes. The Polylok Septic Tank Risers are assembled using stainless steel screws that allow them to be connected to one another. If you have any more queries, please contact us at 1-877-925-5132 or [email protected].

THE POLYLOK SEPTIC TANK RISER ADVANTAGE

Riser systems are available in a variety of shapes, sizes, and designs on the market today. The Polylok septic tank risers are, without a doubt, the best money can buy in this category. There are several causes for this, but the following are the most significant:

FACTORY INSTALLED GASKETS

The Polylok brand is the only one on the market that is sent to you from the factory with gaskets already in place, making it unique. This means that there is no further work necessary to ensure that the riser system is air and water tight! Keep ground water out of your tank, wastewater in your tank, and potentially hazardous gases out of your yard! In contrast to most other products, our Polylok septic tank risers do not require you to purchase or use any other type of sealant between each riser part.

INTERNAL STRUCTURAL RIBS

Pre-installed gaskets are included with every Polylok product, making it the only one on the market that does this. Because of this, there is no additional work needed to ensure that the riser system is airtight and watertight! This is critical in order to keep groundwater out of your tank, wastewater inside your tank, and potentially hazardous gases out of your yard! The majority of other solutions need you to purchase or apply some other type of sealant between each riser component, but with our Polylok septic tank risers, you won’t have to bother about that!

LOW PROFILE RISER LIDS WITH HANDLES

The septic tank access lid on a riser system is one of the most significant components since it is the part of the system that is visible from the outside and that must be removed every time the system is pumped or otherwise serviced. The Polylok lids are pre-installed with handles, which make it simple to remove the lid whenever you need to get access to the system or to replace it. The bottom of the lids is structurally supported, which allows them to remain relatively flat rather than domed in shape, as is the case with many other items on the market.

LARGE TANK ADAPTER RING

It is necessary to use an adapter ring in order to attach risers to your septic tank. We have one of the largest adapter rings available on the market, allowing you to cover up to a 25″ square or 27″ circular aperture with a Polylok adapter ring. This ring fits both 20″ and 24″ risers, allowing you to have a great deal of versatility no matter what size your opening happens to be!

STAINLESS STEEL SCREWS INCLUDED

At Septic Solutions, we strive to make the buying and installation process as simple as possible for our customers. All of our Polylok risers and lids are delivered with all of the stainless steel screws required for installation in one package.

Tuf-Tite Septic Tank Riser, 24’x12′ – – Amazon.com

On July 14, 2018, a reviewer in the United States of America verified that they had made the purchase. All of the products in the shot were purchased by myself. I needed to install an RV sewer hookup, and this was the most environmentally friendly method. No more digging around for the lid when it comes to pump out time! 5.0 stars out of 5 for this product It’s a good fit. On July 14, 2018, Stephanie Stanley posted a blog entry. All of the products in the shot were purchased by myself. I needed to install an RV sewer hookup, and this was the most environmentally friendly method.

The photographs in this review On December 30, 2017, a review was conducted in the United States.

It was necessary to first install an adapter ring to the tank riser in order to adhere the risers to the septic tank, then an extra 24 x 6 riser to provide additional height, and lastly a 24 inch flat lid to complete the installation.
Furthermore, if your septic system requires maintenance in the winter, there will be no digging in frozen earth.
Made to be extremely durable.

5.0 stars out of 5 for this product A must-haveDurable and long-lasting Posted on December 30, 2017 by DM This is an absolute must-have if you want to get to your septic tank quickly for maintenance.
You’ll never have to dig yourself out of a hole again.
Simple to set up.

We eventually painted the lid a brownish color to match the surrounding landscape, which was an option.

In order to keep the adapter ring from moving about, I used cement sealing caulk on the bottom lip and then quick dry cement around the bottom edge.

It worked out well and was built to last.

On April 28, 2016, Justin posted a blog entry.

In order to keep the adapter ring from moving about, I used cement sealing caulk on the bottom lip and then quick dry cement around the bottom edge.

It worked out well and was built to last.

Purchase that has been verified I purchased and installed two of these Tuf-Tite risers on my septic tank to replace the concrete lids that were previously there.

In order to keep the water out, I utilized concrete anchors for the adapter ring and putty tape underneath the ring.

I elected to bury the risers approximately 6″ below the surface of the ground and designate their location with a surface marker.

The grass will eventually cover everything, and no one will be able to tell what is going on until the septic tank needs to be pumped again.

Because they would not come off no matter how much pressure I exerted, I was forced to chisel the concrete “lids” off my septic tank.

As a whole, this was around a $300 repair for two risers that should hopefully last the lifetime of the septic tank.

Purchase that has been verified The two of them that I bought will be installed on my septic tank.

The second one arrived a few days later, but it was so deformed (it was in the shape of an oval) that it couldn’t be fitted into the TAR or lid.

I tested the riser with a tape measure and it measured more than 25 inches across at one point and less than 23 inches across the other axis.

In the image, you can see it after I used massive wood clamps to mold it into a spherical enough form to be placed on the TAR.

The lack of quality control and the oval forms of many risers have caused my project to be delayed by more than a week, according to my estimates.

3.0 stars out of 5 for this product Poor quality control and a high number of returns On March 7, 2021, M.D.U.

The first one was excellent; it was a perfect fit for the flat lid and tank adapter ring (TAR).

Amazon issued a replacement, which arrived with the same oval watp as the original.

This lid will fit (barely), but I was unable to get the shape to fit into the TAR without the use of clamps (which do not fit into the hole when installing the risers) because of the form of the lid.

I like that Amazon makes it simple to exchange items, but yeesh.

Hopefully, the third replacement will be successful!

Purchase that has been verified Mine was a little oval, maybe 2 inches out of round, when it came.

There were also screws missing.

Insert the riser into the hole.

Continue to fill the hole with dirt and pack it down until it is full.

It is possible to pack a bit harder on the sides that are bent ‘outward’ if you know which ones they are.

Mine went from being 2″ out of round to being 1/16″ out of round using this procedure.

Purchase that has been verified I’ll start by noting it is an utter misery to be digging for your septic tank while also experiencing problems with it.

That’s when we made the decision to put in the riser.

If you don’t already have one of these and find yourself digging every time you go outside, I strongly advise you to get one installed.

5.0 stars out of 5 for this product If you don’t enjoy digging, this is a must-have.

I’ll start by noting it is an utter misery to be digging for your septic tank while also experiencing problems with it.

That’s when we made the decision to put in the riser.

If you don’t already have one of these and find yourself digging every time you go outside, I strongly advise you to get one installed.

The photographs in this review On August 24, 2020, the United States will conduct a review.

It is a full system that works effortlessly when put together.

For the money, he’s a little bit of a jerk.

I had hoped to have everything delivered so that I wouldn’t have to travel to the store to finish things off, but that didn’t work out as planned.

Amazon.com : septic tank riser kit

SubscribeSave allows you to save even more money. Sketch was used to create this design. Sponsored SubscribeSave allows you to save even more money. Get it as soon as possible. Friday, February 11 Shipping is $21.29 per order. Order quickly as there are only 5 left in stock. SubscribeSaveShips to the Netherlands allows you to save even more money. Only 6 of these items are left in stock – purchase soon. SubscribeSaveShips to the Netherlands allows you to save even more money. Order quickly as there are only 5 left in stock.

A 5% discount is applied at the time of purchase.

Ships to the Netherlands are available.
SubscribeSave allows you to save even more money.
A 5% discount is applied at the time of purchase.

SubscribeSave allows you to save even more money.
With the SubscribeSave coupon, the price drops to $80.99.
With the voucher, you may save $5.00.

From Wednesday, February 16 through Friday, March 4 SubscribeSaveGet it allows you to save even more money.

With the SubscribeSave coupon, the price drops to $18.53.

With the coupon, you may save $1.00.

There are only 2 left in stock, so act quickly.

Only 13 of these items are left in stock – purchase soon.

SubscribeSaveGet it allows you to save even more money.

SubscribeSaveShips to the Netherlands allows you to save even more money.

At the time of purchase, a 6% discount is applied.

SubscribeSave allows you to save even more money.

At the time of purchase, a $1.00 coupon is applied.

Septic tank riser kit Plumbing at Lowes.com

A leaking pipe is one of the most annoying things that can happen. When left ignored, they can become damaging over time, resulting in the need for costly repair work to be performed. However, with the appropriate expertise and the right plumbing gear, you can stop a leak before it causes extensive water damage that is expensive to repair. Identifying the Proper Fit Various pipe fittings will wear out over time and will need to be changed or repaired as a result. Lowe’s provides the pipe fittings you need for your project or repair, whether you’re looking for PVC or copper pipe fittings.

Large-scale projects or extensive repairs In some cases, you may require plumbing materials for more extensive repairs or replacements.

Our Water Heater Buying Guidecan assist you in determining which water heater is the best fit for your needs.
Troubleshooting Your Toilet Issues When it comes to plumbing problems in the home, one of the most frequently encountered is with the toilet, which is one of the most frequently used appliances.
In some cases, more than a plunger is required to solve the problem.

We also have whole toilet repair kits available, as well as individual toilet components such as flappers, chains, and levers.

Plumbing problems may take up a lot of your time and money, and they can be quite inconvenient. The tools and skills you’ll need to address issues and complete projects correctly the first time are available at Lowe’s.

Best Price on Septic Tank Risers & Covers Online Guarenteed!

Septic Tank Risers and Lids are available from TGWasteWater in a variety of sizes and styles. We also provide a large selection of accessories for our riser products. Are you fed up with having to pay to have your system dug up and pumped every time it needs to be refilled? Are your present concrete risers at danger of collapsing? Is it becoming tiresome to have to lift a hefty concrete cover every time you need to access your tank? It is possible that you responded yes to any of these questions and that you should think about putting a riser system on your septic tank.

Risers from Tuf-Tite and Polylok are available for purchase.

Please keep in mind that Tuf-TitePolylok products are incompatible with one another.
Consequently, if you want us to utilize a Tuf-Tite lid, you must purchase Tuf-Tite Risers, and the reverse is true.
PLEASE CLICK HERE TO READ OUR INSTRUCTION GUIDE ON HOW TO INSTALL RISERS ON A CONCRETE SEPTIC TANK

Aeration Septic – Septic Tank Risers and Lids

Septic tank lids, risers, and covers are an excellent method to save time and money while also increasing safety around the septic system and preventing flooding. Installing septic tank lids and risers to bring access to your system up to code can save you the money you would otherwise spend on having your system dug up every time it has to be pumped. If you replace heavy concrete lids with lightweight yet sturdy and durable plastic lids that can be attached securely to protect the safety of children and dogs in the vicinity of the system, you may save your back.

Polylok Septic Tank Risers and Lids

12″ x 6″ Septic Tank Riser made of Polylok

Extra strength is provided by heavy-duty structural rib reinforcing. For UV-Rays, a green opaque hue is used. Molded warning signs that are clearly visible for safety

Frost is prevented from clinging to frost prone locations by structural ribs on the interior.

Riser Lid for Septic Tank with Polylok 12″ Lid

Surface that is skid resistant

The highest level of UV protection currently available
In order to dissuade unwanted entrance, square drive screws are used.

Septic Tank Riser Polylok 20″ x 6″ Polylok Septic Tank Riser

Watertight and airtight
Provides the highest level of UV protection currently available. High-density polyethylene is used in its construction. Frost is prevented from clinging to frost-prone locations by structural ribs on the interior.

Septic Tank Riser Polylok 20″ x 12″ Polylok 20″ x 12″

Watertight and airtight
Provides the highest level of UV protection currently available. High-density polyethylene is used in its construction.

Riser Lid for Septic Tank with Polylok 20″ Lid

The surface is slip-resistant, and it has two recessed handles for simple removal. The most effective UV protection available
In order to dissuade unwanted entrance, square drive screws are used.

The Polylok 20″ Heavy Duty Septic Tank Lid is made of polypropylene.

Surface that is skid resistant
The highest level of UV protection possible
It has a foam gasket to provide an airtight and waterproof connection. In order to dissuade unwanted entrance, square drive screws are used.

The Polylok Septic Tank Riser measures 24″ x 6″.

Watertight and airtight
Provides the highest level of UV protection currently available. High-density polyethylene is used in its construction. Bring the septic access up to grade in no time

The Polylok 24″ x 12″ Septic Tank Riser is made of polyethylene.

Watertight and airtight
Provides the highest level of UV protection currently available. High-density polyethylene is used in its construction.

Riser Lid for Septic Tank with Polylok 24″ Lid

The surface is slip-resistant, and it has two recessed handles for simple removal. The most effective UV protection available
In order to dissuade unwanted entrance, square drive screws are used.

Alternatively, you may phone us at 330-236-1561.

Tuf-TIte Septic Tank Risers and Lids

Tuf-Tite 20″ x 6″ Septic Tank Riser is made of polyethylene.

Watertight and airtight construction
Bring the septic access up to grade in no time
Stackable

Tuf-Tite 20″ x 12″ Septic Tank Riser is made of polyethylene.

Watertight and airtight construction
Bring the septic access up to grade in no time
Stackable

Tuf-Tite Heavy Duty Septic Tank Lid, 20″ in Diameter

Air and watertight connection made possible by a foam gasket
Heavy-duty, long-lasting structure

Strong, long-lasting structure with a foam gasket for air and waterproof connection.

Watertight and airtight construction
Bring the septic access up to grade in no time
Stackable

Tuf-Tite Septic Tank Riser (24″ x 12″ x 4″

Watertight and airtight construction
Bring the septic access up to grade in no time
Stackable

Tuf-Tite Heavy Duty Septic Tank Lid, 24″ in Diameter

A foam gasket is used to ensure an airtight and waterproof connection. Heavy-duty, long-lasting structure
Screws made of stainless steel are provided.

Tuf-Tite Domed Septic Tank Lid, 24″ in Diameter

Screws made of stainless steel are supplied
Two horizontal safety screws are also included.

What You Should Know About Septic Tank Risers

Septic tank risers are an important part of any septic system, and they should be installed in every property. This article will provide you an overview of septic tank risers and how they may help your septic system. What Is the Function of a Septic Tank Riser? A septic tank riser is a conduit that connects your home’s surface drainage system to your septic tank beneath the ground level. An access port or the pump-out ports on the septic tank are where the riser connects to the tank. Septic tank risers are equipped with lids that can be quickly removed to allow you to check or pump your septic tank without having to dig up your yard.

These structures are often made of materials that disintegrate slowly over time, such as plastic or concrete.
What Are the Advantages of Using Risers?
Normally, this entails digging up your yard before the pump is installed and reburying the tank once it has been installed.
The use of a septic tank riser can help to minimize the amount of time spent pumping your septic tank.
The fact that the riser is visible above the surface of your yard makes it an ideal signal for locating your septic tank the first time you need to discover one in your yard.
For those who want to stay in their house for several years, septic tank risers are not only handy, but they are also cost-effective.
Concrete risers are more durable, but they are also more expensive, and the price will be determined by the quote you receive from the contractor who will be installing them.

Because labor expenses account for a large amount of the fees that contractors charge for septic system inspection and pumping, installing a riser may possibly reduce the future cost of septic service by as much as 50 percent.

Each and every property can profit from the installation of a septic tank riser, but this does not imply that you should do so immediately.

This allows for the installation of the pump and riser to be completed in a single step.

Because a riser should be considered a long-term investment, you should be certain that your tank is in good functioning shape before installing one.

A septic tank riser is a straightforward concept that may save you a significant amount of money and pain when it comes to septic system maintenance and repair.

We look forward to hearing from you and addressing any concerns you may have concerning your septic system requirements. Contact us now. Please let us know how we may be of assistance to you and your septic system right now!

Septic – Septic Risers & Covers – AK Industries Septic Tank Risers

Frequently Asked Questions
Shipping & Refunds
About Us
Contact Us
Drainage Blog
Terms and Conditions
Privacy Policy
Sitemap

Popular Brands

Various1
NDS
Reed Manufacturing
Various2
Stegmeier LLC
Agri Drain
Normandy
PT Coupling
Various3
Fernco
View All
Various4
Various5
Various6
Various7
Various8
Various9
Various10
Various11
Various12
Various13
Various14
Various15
Various16
Various17
Various18
Various19
Various20

Subscribe to our newsletter

Receive the most up-to-date information on new goods and forthcoming discounts. Powered by BigCommerce, The Drainage Products Store provides a convenient online shopping experience.

What is Septic Tank Riser

If you are one of the twenty percent of houses in the United States who are not linked to a centralized sewer system, the likelihood is that you have a septic system installed in your yard. A septic system is a sewage maintenance system that is installed on-site. While you are no longer required to pay monthly sewer fees to your local municipality, you are still responsible for the upkeep and maintenance of your septic tank system. Septic Connection, for example, is an excellent choice for an experienced septic service company in your area.

Installation of an aseptic tankriser can help to reduce the amount of time spent on sewer maintenance.
Due to the fact that septic tanks are often constructed many yards below and even the lids are just a few feet deep, locating and reaching the tank lid may be a time-consuming and difficult task.
The installation of a septic tank riser is a cost-effective solution to this issue.
The Advantages and Disadvantages of a Septic Tank Riser The world is not full of rainbows and butterflies.

Septic tank risers are built of sturdy materials that protect the septic tank lid from the weather. They are installed on the outside of the tank. A septic tank riser not only makes the placement of your septic tank lid evident, but it also protects your septic tank against unintentional pressure buildup. It’s easy to lose track of where the septic tank is and end up parking your car over it or dumping heavy equipment on it, which is dangerous. In addition, homeowners may be concerned about the expense of installing a new septic tankriser, but it should be emphasized that installation is straightforward and inexpensive. In addition, the expense is insignificant when compared to the long-term savings. With a septic tank riser, you will save both time and money during future septic system maintenance because your septic service provider will be able to find the tank and perform the necessary repairs more quickly
And The problem of aesthetics is also a source of concern for many homeowners. The fact that you do not want a pipe protruding from your property is totally understandable. If aesthetics are important to you, inform your septic tank riser installation professional so that they can ensure that the riser is installed such that the top of the riser is a few inches below the ground surface. By doing so, you may cover the surface with a thin layer of dirt and grass.

The Process of Locating a Reliable Septic Tank Riser Installer South Carolina-based Septic Connection is a fully licensed and insured firm with years of industry expertise, competent experts, and a professional staff. Our state-of-the-art equipment enables us to complete installations in a short amount of time and at a cost that is reasonable to our customers. So you never have to worry about dealing with septic difficulties on your own again, we offer emergency services around the clock. Are you ready to form a partnership?

Septic Tank Lids

If you have ever had to hire someone to locate theSeptic Tank that was buried someplace in your East Bethel MN yard, then you should consider using Septic Tank Acess Risers as a primary benefit. Increased accessibility when it comes time to have the septic tank pumped out or inspected will result from raising the entry point to the surface of the ground. It has the potential to save a significant amount of time and money over time.

CSICustom Septic Inc. prefers to install new septic tanks with the manhole cover at or near ground level, rather than above it. It is not necessary to excavate for inspections or maintenance when using a Secure Lid since it provides safety and protection.

10 Reasons to Install Septic Tank Riser With Lid

Typically, a Septic Tank Access Riser is built of either plastic or concrete. They typically measure between eight to twenty-four inches in circumference. When constructed properly, a riser and lid may give a variety of benefits that will most likely save you both time and money. Listed below are ten reasons why you should consider installing a Septic Tank Riser:

Easy Septic System Maintenance
Easy Access to the Pump Tank
Convenience Counts for Something. Septic tank maintenance costs are reduced because surface water or runoff is prevented from entering the tank. Access to Septic Tank Inspections should be improved. Reduced amount of time spent locating an underground septic tank Installation is a one-time expense
The cover provides a watertight seal
The septic tank lid is securely attached
And Landscaping Has the Potential to Improve Appearance

Replacing Cracked or Broken Tank Cover

When it comes to dealing with sewer, we place the highest premium on safety first. A septic tank cover that is broken or cracked might pose a safety hazard. Additionally, if water escapes into the tank, it might reduce the reliability of sewage treatment. Excessive volumes of water might cause the organic treatment process taking place inside the tank to become disrupted. As part of our Repair Service, CSI Custom Septic, Inc. will replace a cracked, broken, or missing septic tank cover. Contact us for more information.

MN Septic InspectionsRepairs

Don’t waste any more time or money trying to locate and dig up the Septic Tank Cover in your East Bethel, Minnesota yard. With the expertise of CSI Custom Septic, Inc., installing or replacing a septic tank manhole cover riser is simple and economical. Our professionals can assist you in selecting the most appropriate tank lid for your needs and in ensuring that it is properly installed. Septic System Inspections and Maintenance are made faster and easier with the use of convenient Extenders and Risers.

CSI Custom Septic, Inc.

Call (763) 218-4769 for more information.