Where To Buy A Septic Tank? (Solution found)

  • A good place where you can buy your tank is Best Septic Tank Installation Repair Services. We can sell you any size of septic tank and all the complements for it.

What is the cheapest septic tank?

Types of Septic Tank Systems These conventional septic systems are usually the most affordable, with an average cost of around $3,000.

What is the cost of a plastic septic tank?

With an average cost of $830 to $1,900, plastic septic tanks are a lightweight option compared to a concrete tank. 6

Does Walmart have septic tanks?

Norwesco 41721 1000 Gallon Two Compartment Yellow Septic Tank – Walmart.com.

What are the alternatives to septic tanks?

Alternative Septic Systems

  • Raised Bed (Mound) Septic Tank Systems. A raised bed drain field (sometimes called a mound) is just like what it sounds.
  • Aerobic Treatment Systems (ATS) Aerobic systems are basically a small scale sewage treatment system.
  • Waterless Systems.

Can you have a septic tank without a leach field?

The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.

How big of a septic tank do I need?

The larger your home, the larger the septic tank you’re going to need. For instance, a house smaller than 1,500 square feet usually requires a 750 to 1,000-gallon tank. On the other hand, a bigger home of approximately 2,500 square feet will need a bigger tank, more than the 1,000-gallon range.

How long do septic tanks last?

A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.

Is a plastic septic tank better than concrete?

Plastic septic tanks are watertight and are immune to water-based corrosion. They are also rust-resistant. Plastic tanks are less prone to cracking since plastic is flexible, and thus a plastic septic tank does not crack as much as a cement septic tank. Plastic septic tanks are more hygienic than cement tanks.

What are the 3 types of septic systems?

Types of Septic Systems

  • Septic Tank.
  • Conventional System.
  • Chamber System.
  • Drip Distribution System.
  • Aerobic Treatment Unit.
  • Mound Systems.
  • Recirculating Sand Filter System.
  • Evapotranspiration System.

How do I clean my septic tank naturally?

You can mix about a 1/4 cup of baking soda with 1/2 cup of vinegar and 2 tablespoons lemon to make your own natural cleaning agent. The baking soda will fizz up to help get the dirt and grime in your tub and drains. It’s a great cleaner and your septic system will thank you!

How do you use Instant Power septic treatment?

GENERAL USE: Septic tanks or cesspools of 500 – 1,000 U.S. Gallon capacity: Pour and flush 1/4 Cup (4 Tablespoons) of Instant Power down your toilet once a week. Positive results should be seen within 2 – 4 weeks. To maintain system, use same application weekly.

Plastic Septic Tanks

Ace, Norwesco, and Snyder Industries brand septic tanks are available at Tank Depot at competitive prices. Norway-based Norwesco has been manufacturing polyethylene septic tanks since 1980. Norwesco is the world’s biggest maker of polyethylene tanks. Norwesco has a wealth of knowledge and expertise to give you goods that have been tested and proved to provide years of dependable, trouble-free service. State and municipal health officials from coast to coast have certified Norwesco septic tanks, which are covered by a three-year warranty and have been in use for decades.

NORWESCO BELOW GROUND TANKS – Conversion OptionInformation about NORWESCO BELOW GROUND TANKS Choosing a location for the installation of your Plastic Septic Tank When purchasing a septic tank, it is important to examine the following characteristics.

Installation is a breeze.

Any Norwesco septic tank may be delivered to the project site in a pickup truck and handled by just two persons, depending on the model.

  • Construction is made of a single piece of rotationally molded plastic.
  • Design for Exceptional Strength The design of the ribs and the location of the ribs give the tank with exceptional structural stability.
  • Norwesco’s stringent quality control measures ensure that its septic tanks are safe for the environment.
  • 750, 1000, 1250, and 1500 gallon tanks are offered as single compartment or double compartment tanks (2/3 – 1/3) depending on your needs.
  • Pre-plumbed / ready to be put into service Norwegian Septic Tanks (750 gallons and greater) are delivered to you fully assembled and ready to be installed.
  • Tees are measured and cut to meet the requirements of each state code, ensuring that the tank you get is ready for installation.
  • This upgraded design outperforms existing lid designs in terms of strength and durability.

The gasket ensures a watertight seal around the opening of the lid. Accessory options are available. Manhole extensions and lid-riser combinations are offered to bring tank access up to code standards and to bring tank access up to code standards.

Plastic Septic Tanks

Plastic-Mart.com is one of the nation’s top suppliers of plastic septic tanks, offering a diverse selection of goods from the most dependable manufacturers in the business. When looking for a sewage holding tank for a residential or business installation, rotomolded plastic septic tanks made of polyethylene resins are an excellent choice. Our rotational molding technology creates better, stronger plastic tanks at a far lower cost than our competitors’ processes. We provide ribbed septic tanks for in-ground usage, as well as a large choice of other septic tank accessories.

Septic tanks are used for a variety of purposes, including holding tanks, waste storage tanks, and more.

We even offer plastic septic tanks that can be sent in as little as 48 hours, such as:

  • Plastic Septic Pump Tanks: 200 Gallon Plastic Septic Pump Tank
  • 300 Gallon Sphere Pump Tank
  • 500 Gallon Low Profile Plastic Septic Tank
  • 1000 Gallon 2 Compartment Plastic Septic Tank
  • 200 Gallon Low Profile Plastic Septic Pump Tank
As one of America’s leading septic tank suppliers, we have locations spread throughout the U.S. for pick up and we offer direct drop ship straight to your door as well. Email or give us a call toll free at866-310-2556for plastic septic tank selection assistance.NORWESCO BELOW GROUND TANKS – Conversion OptionInformationSelecting an installation site for your Plastic Septic TankPlastic-Mart offers rotationally molded polyethylene septic tanks fromNorwesco, Rotonics,Ace-Roto MoldSnyder Industries. If you have any questions or would like to buy a septic tank you can do so online or call our sales department toll free at866-310-2556.

California Plastic Septic Tanks For Sale

California Septic Tanks for sale at the lowest possible costs may be found on the internet. Septic tanks made of plastic may be purchased for up to 50% less. These septic tanks have been approved for use in the state of California by the state government.

Tank / Capacity Length Width Height Size Compartments Part From Price
200 Gallon Septic Pump TankShips Fast! ~ 48 Hour Lead Time 47″ 47″ 56″ 47″ L 47″ W 56″ H 1 43745 MN, MS, OH, OK, UT $520
225 Gallon Septic Pump Tank – FL Approved 47″ 47″ 56″ 47″ L 47″ W 56″ H 1 44788 FL $567
300 Gallon Septic Pump TankShips Fast! ~ 48 Hour Lead Time 48.5″ 48.5″ 53″ 48.5″ L 48.5″ W 53″ H 1 5260000W94202 AR, CA, MS, NE, WV $962
300 Gallon Septic Pump Tank 54″ 54″ 56″ 54″ L 54″ W 56″ H 1 AST-0300-1 IA $729
300 Gallon Septic Pump TankShips Fast! ~ 48 Hour Lead Time 54″ 54″ 54″ 54″ L 54″ W 54″ H 1 41319 CA, GA, MN, MS, NY, OH, OK, UT, WA $724
300 Gallon Septic Pump Tank – FL Approved 54″ 54″ 54″ 54″ L 54″ W 54″ H 1 44789 FL $974
500 Gallon Septic Pump TankShips Fast! ~ 48 Hour Lead Time 60″ 60″ 63″ 60″ L 60″ W 63″ H 1 5170000W94203 AR, CA, MS, WV $1,223
500 Gallon Septic Tank 88″ 48″ 43″ 88″ L 48″ W 43″ H 1 ST21L MS $0
500 Gallon Septic Pump Tank 63″ 63″ 74″ 63″ L 63″ W 74″ H 1 AST-0500-1 IA $933
500 Gallon Septic Pump Tank 64″ 64″ 67″ 64″ L 64″ W 67″ H 1 40785 CA, MN, NY, OH, OK, UT, WA $963
525 Gallon Septic Pump Tank – FL Approved 64″ 64″ 67″ 64″ L 64″ W 67″ H 1 44830 FL $1,134
1000 Gallon Septic Tank 102″ 60″ 63″ 102″ L 60″ W 63″ H 2 41721 CA $2,020
1250 Gallon Septic Tank 116″ 55″ 70″ 116″ L 55″ W 70″ H 2 41744 CA $2,283
1500 Gallon Septic Tank 135″ 55″ 70″ 135″ L 55″ W 70″ H 2 41761 CA $2,787
2000 Gallon Holding Tank 126″ 98″ 51″ 126″ L 98″ W 51″ H 1 42559 WA $4,169
2000 Gallon Holding Tank 126″ 98″ 51″ 126″ L 98″ W 51″ H 1 44593 MN, OH, OK $4,169
2500 Gallon Holding Tank 159″ 99″ 51″ 159″ L 99″ W 51″ H 1 44079 CA, MN, OK $5,178
2500 Gallon Septic Tank 159″ 99″ 51″ 159″ L 99″ W 51″ H 1 44079 CA, MN, OK $5,178
2600 Gallon Holding Tank 155″ 99″ 51″ 155″ L 99″ W 51″ H 1 43770 MN $5,450
2650 Gallon Holding Tank 155″ 99″ 81″ 155″ L 99″ W 81″ H 1 43771 MN $5,723
3525 Gallon Holding Tank 211″ 102″ 51″ 211″ L 102″ W 51″ H 1 44390 CA, MN, TX $8,438
3525 Gallon Septic Tank 211″ 102″ 51″ 211″ L 102″ W 51″ H 1 44390 CA, MN, TX $8,438

Concrete vs Plastic Septic Tanks: Which is Better?

The septic tank on your property is one of the most important components of the whole plumbing system on your property. Septic tanks are designed to safely handle and manage all of the wastewater generated by your property. If your septic tank is not operating properly, you should replace or repair it as soon as possible. It is possible that your septic tank is not operating properly, causing your entire plumbing system to be interrupted. This might result in you placing yourself and your family in risk, as well as causing damage to your home or garden.

  • There is a good probability that you will be replacing your present septic system with a new one within a few years.
  • This is due to the fact that the septic tank you select will be used to service your plumbing system in the future.
  • Septic tanks made of sorplastic.
  • Knowing their advantages and disadvantages will assist you in selecting the one that best matches your needs and fits inside your budget.

Plastic Septic Tanks

Advantages

  • The purchasing price of plastic septic tanks is less expensive than that of concrete septic tanks
  • Thus, they are more cheap. Plastic septic tanks are simple to install since they are lightweight
  • They take just a small number of people to complete the job and require little time and equipment. As a result, installation costs are reduced. Poly septic tanks are lightweight and versatile, making them ideal for travel. This implies that they may be placed in a variety of locations. Plastic septic tanks are waterproof and impervious to corrosion caused by water-based substances. Additionally, they are rust-resistant. Plastic tanks are less prone to cracking than cement tanks because plastic is more flexible than cement
  • As a result, a plastic septic tank does not break as often as a cement septic tank It is more sanitary to use polyethylene septic tanks than than cement tanks
  • Plastic tanks are delivered fully assembled and ready to be fitted.

Disadvantages

  • Disadvantages

Possibly of interest to you is this article: Should you buy a property with a septic system?

Concrete Septic Tanks

Advantages

  • Cement septic tanks outlast plastic tanks in terms of durability and, if maintained properly, may survive for a lengthy period of time. In the right circumstances, with regular draining and good maintenance, a cement septic tank can endure up to 40 years or more. Cement septic tanks are resistant to changes in the environment, such as tree roots or shifting soil conditions. Concrete tanks are not adversely affected by the weight that is placed on top of them. Comparing cement septic tanks to plastic septic tanks, cement tanks are far more durable and require little maintenance. The fact that concrete tanks are highly hefty and contain large effluent levels means that they are impervious to “floating.” There are no restrictions on using cement tanks in the United States
  • They are permitted in every state.

Disadvantages

  • Concrete septic tanks are more expensive to purchase and install than plastic septic tanks, mostly due to the weight of the concrete tanks. Concrete tanks are more difficult to carry and install than plastic tanks due to the fact that they are awkward and more big in comparison. Therefore, the cementseptic tank installation necessitates the use of heavy equipment and requires a significant amount of time. Cement tanks are also more difficult to repair and install than other types of tanks. As your cement tank is broken, it is more difficult to repair it efficiently when compared to plastic tanks. Compared to plastic tanks, cement septic tanks are more prone to corrosion due to the fact that they fracture or corrode as the tanks age, particularly if they are not properly maintained.

Selecting a Septic Tank

For many homeowners in Atlanta, GA, cement is the go-to material since it is permitted in all 50 states in the United States, including Georgia. It has been a long time since cement has been the preferred building material due of its resistance to damage caused by shifting or heaviness. Plastic septic tanks, on the other hand, are less expensive than concrete septic tanks when it comes to cost comparison. It is recommended that you use a plastic tank when you live in a distant place since cement tanks cannot compete with the simplicity with which it can be installed and transported.

Septic tanks made of cement are not recommended for use in areas with significant acidity in the soil.

Despite the fact that there are several aspects to consider when deciding between a plastic and a cement septic tank, examine your location and scenario and choose the choice that feels best for your property.

We are experts in both concrete and plastic septic tanks, and we will guide you through the process of selecting the best solution for your house. For all of your septic tank system requirements, contact The Original Plumber.

Septic Tanks For Sale

Septic tank with a low profile of 500 gallons (Austin TX)

See also:  How Much Does It Cost For A Septic Tank? (Question)
SKU:

Dimensions: 97″ L x 48″ W x 42″ H

Capacity in gallons:

13827, 74801, and 43130 are the numbers to remember. Underground Water Cistern Storage Tank with a capacity of 1200 gallons for $1,025.00

SKU:

The dimensions are 102″L x 60″W x 63″H.

Capacity in gallons:

55375, 43130, 30223, 74801, 84074, 13827, 93230, 84074, 13827, 93230, 84074, 13827, 93230, 84074, 13827, 93230, 84074, 13827, 93230, 84074, 13827, 93230, 93230, 93230, 93230, 93230, 93230, 93230, 93230,

SKU:

Dimensions: 211″ L x 102″ W x 73″ H

Capacity in gallons:

75840, 55375, and 84074 are the numbers. Price: $12,089.99300 Gallon Sphere Pump Tank (Price: $12,089.99 (Austin TX)

SKU:

the numbers 75840, 55375, and 84074 are the numbers $13,089.99300 Gallon Sphere Pump Tank (Price: $12,089.99) (Austin TX)

Capacity in gallons:

The numbers 55375, 43130, 30223, 13827, 98671, 93230, 84074, and 74801 are all digits. Tank Capacity: 723.991725 Gallons Underground Plastic Water Tank Price: $723.991725 Gallons Underground Plastic Water Tank

SKU:

The numbers 55375, 43130, 30223, 13827, 98671, 93230, 84074, and 74801 are all digits in the number system. Gallons Underground Plastic Water Tank for $723.991725 Gallons Underground Plastic Water Tank for $723.991725 Gallons Underground Plastic Water Tank

Capacity in gallons:

55375, 13827, 74801, 98671, 43130, 84074, 93610, 30223; 74801, 98671, 43130, 84074, 93610, 30223; 74801, 98671, 30223; 74801, 98671, 30223; 74801, 98671, 30223; 74801, 98671, 30223; 74801, 30223; 74801, 30223; 74801, 30 The cost is $3,010. Septic Leaching Chamber of the 99Arc 36 Type

SKU:

ADS-3613BDR

Dimensions:

Dimensions: 63″L x 36″W x 12″H

Capacity in gallons:

63 inches long by 36 inches wide by 12 inches high.

SKU:

47″ in diameter x 56″ in height

Capacity in gallons:

55375, 74801, 84074, and 43130 are the area codes. Price: $519.99750 LP 2 CPT IAMPO NEXGENPREPLUMB LP 2 CPT IAMPO NEXGENPREPLUMB

SKU:

The dimensions are 92″” L x 60″” W x 51″” H.

Capacity in gallons:

$1,765.99 1000 Gallon Plastic Septic Tank – 2 Compartment (N/A) Price: $1,765.99 (41720)

SKU:

The dimensions are 102″ L x 60″ W x 63″ H.

Capacity in gallons:

30223, 13827, 98671, 43130, 93230, 55375, 74801, 84074, 30223; 13827; 98671, 43130; 93230; 84074; 30223; 13827; 30223; 30223; 30223; 30223; 30223; 30223; 30223; 30223; 30223; 30223; 30223; 30223; 30223; 302 The cost is $1,808.00. TRUCK TANK SNYDER 500 GAL SPHERE

SKU:

The dimensions are 60″L x 60″W x 63″H.

Capacity in gallons:

Price: $1,040.00 for 68504, 72365, 26416, and 93610.

Florida Approved Septic Tanks Archives

225 Gallon Norwesco Low Profile Plastic Septic Pump Tank Non Plumbed 43551 48″L x 48″W x 50″H 225 GA, WA $579 SPECS DWG
300 Gallon Norwesco Low Profile Plastic Septic Pump Tank Non Plumbed 43552 51″L x 51″W x 52″H 300 GA $776 SPECS DWG
300 Gallon Norwesco Plastic Septic Pump Tank – Non Plumbed 41319 54″L x 54″W x 54″H 300 UT, CA, GA, MN, NY, OH, OK, WA $764 SPECS DWG
500 Gallon Norwesco Legacy Septic Tank – Single Compartment Non Plumbed – 1MH – GT 41320 101″L x 57″W x 47″H 500 UT, GA, MN, WA $1,107 SPECS DWG
1000 Gallon Norwesco Legacy Septic Tank – Double Compartment – 2MH – GT 44474 102″L x 60″W x 63″H 1000 UT, GA, MN, NY, OH, OK, WA $1,781 SPECS DWG
1000 Gallon Plastic Septic Tank – Double Compartment – Low Profile – 2MH – GT 43517 127″L x 60″W x 51″H 1000 UT, GA, MN, NY, OH, OK, WA $1,893 SPECS DWG
1000 Gallon Norwesco Bruiser Septic Tank – Single Compartment – 2MH 41734 102″L x 60″W x 63″H 1000 UT, GA, MN, NY, OH, OK, WA $2,177 SPECS DWG
1000 Gallon Norwesco Bruiser Septic Tank – Double Compartment – 2MH 41735 102″L x 60″W x 63″H 1000 UT, GA, MN, NY, OH, OK, WA $2,300 SPECS DWG
1000 Gallon Norwesco Legacy Septic Tank – Single Compartment – 2MH – GT 44473 102″L x 60″W x 63″H 1000 UT, GA, MN, NY, OH, OK, WA $1,794 SPECS DWG
1000 Gallon Plastic Septic Tank – Single Compartment – Low Profile – 2MH – GT 42405 127″L x 60″W x 51″H 1000 UT, GA, MN, NY, OH $1,771 SPECS DWG
1000 Gallon NorwescoSeptic Tank – Single Compartment – 2MH 41718 102″L x 60″W x 63″H 1000 UT, GA, MN, NY, OH, OK, WA $1,850 SPECS DWG
1000 Gallon Norwesco Septic Tank – Double Compartment – 2MH 41720 102″L x 60″W x 63″H 1000 UT, GA, MN, NY, OH, OK, WA $1,973 SPECS DWG
1250 Gallon Plastic Septic Tank – Double Compartment – Low Profile – 2MH – GT – SI/SO 43545 157″L x 60″W x 51″H 1250 GA $2,405 SPECS DWG
1250 Gallon Plastic Septic Tank – Single Compartment – Low Profile -2MH – GT – SI/SO 43544 157″L x 60″W x 51″H 1250 GA $2,254 SPECS DWG
1500 Gallon Norwesco Legacy Septic Tank – Double Compartment – 2MH – GT 44480 135″L x 55″W x 70″H 1500 UT, GA, MN, NY, OH, OK, WA $2,728 SPECS DWG
1500 Gallon Norwesco Bruiser Septic Tank – Single Compartment – 2MH 41771 135″L x 55″W x 70″H 1500 UT, GA, MN, NY, OH, OK, WA $3,163 SPECS DWG
1500 Gallon Norwesco Bruiser Septic Tank – Double Compartment – 2MH – GT 44470 135″L x 55″W x 70″H 1500 UT, GA, MN, NY, OH, OK, WA $3,128 SPECS DWG
1500 Gallon Norwesco Bruiser Septic Tank – Single Compartment – 2MH – GT 44469 135″L x 55″W x 70″H 1500 UT, GA, MN, NY, OH, OK, WA $2,947 SPECS DWG
1500 Gallon Norwesco Septic Tank – Double Compartment – 2MH 41760 135″L x 55″W x 70″H 1500 UT, GA, MN, NY, OH, OK, WA $2,940 SPECS DWG
1500 Gallon Norwesco Legacy Septic Tank – Single Compartment – 2MH – GT 44479 135″L x 70″W x 70″H 1500 UT, GA, MN, NY, OH, OK, WA $2,547 SPECS DWG
1500 Gallon Plastic Septic Tank – Double Compartment – Low Profile – 2MH – GT – SI/SO (Side in and side out) 43547 157″L x 69″W x 51″H 1500 GA $2,850 SPECS DWG
1500 Gallon Plastic Septic Tank – Single Compartment – Low Profile – 2MH – GT – SI/SO 43546 157″L x 69″W x 51″H 1500 GA $2,668 SPECS DWG
1500 Gallon Norwesco Septic Tank – Single Compartment – 2MH 41758 135″L x 55″W x 70″H 1500 UT, GA, MN, NY, OH, OK, WA $2,755 SPECS DWG
1500 Gallon Norwesco Bruiser Septic Tank – Double Compartment – 2MH 41772 135″L x 55″W x 70″H 1500 UT, GA, MN, NY, OH, OK, WA $3,349 SPECS DWG

Septic Tank Installation and Pricing

Price: $1,040.00. 68504, 72365, 26416, 93610

Who Needs a Septic Tank?

For the most part, in densely populated areas of the nation, a home’s plumbing system is directly connected to the municipal sewer system. Because municipal sewer lines are not readily available in more rural regions, sewage must be treated in a septic tank. If you’re moving into a newly constructed house or onto land that doesn’t already have a septic tank, you’ll be responsible for putting in a septic system on your own.

How to Prepare for Your Septic Tank Installation

Here are a few pointers to keep in mind to make sure your septic tank installation goes as smoothly as possible.

Receive Multiple Estimates

Receiving quotations from licensed septic tank installers and reading reviews about each firm using trustworthy, third-party customer evaluations should be done before any excavation or signing of any paperwork is done.

Examine your options for a contractor and make sure they have the appropriate insurance and license, as well as the ability to include critical preparations such as excavation and drain field testing in their quotation.

Test the Soil and Obtain a Permit

For septic systems to function properly, permeable soil surrounding the tank must absorb and naturally handle liquid waste, ensuring that it does not pollute runoff water or seep into the groundwater. The drain or leach field is the name given to this region. Before establishing a septic tank, you are required by law to do a percolation test, sometimes known as a “perc” test. This test indicates that the soil fits the specifications established by the city and the local health agency. In most cases, suitable levels of permeable materials, such as sand or gravel, are necessary in a soil’s composition.

Note: If you wish to install a septic tank on your property, you must first ensure that the ground passes the percolation test.

Plan for Excavation

Excavation of the vast quantity of land required for a septic tank necessitates the use of heavy machinery. If you are presently residing on the property, be careful to account for landscaping fees to repair any damage that may have occurred during the excavation process. Plan the excavation for your new home at a period when it will have the least influence on the construction process if you are constructing a new home. Typically, this occurs before to the paving of roads and walkways, but after the basic structure of the home has been constructed and erected.

The Cost of Installing a Septic Tank

There are a few installation charges and additional expenditures connected with constructing a new septic system, ranging from a percolation test to emptying the septic tank and everything in between.

Percolation Test

A percolation test can range in price from $250 to $1,000, depending on the area of the property and the soil characteristics that are being tested. Ordinarily, specialists will only excavate a small number of holes in the intended leach field region; however, if a land study is required to identify where to excavate, the cost of your test may rise.

Building Permit Application

A permit will be required if you want to install a septic tank on your property. State-by-state variations in permit prices exist, however they are normally priced around $200 and must be renewed every few years on average.

Excavation and Installation

When you have passed a percolation test and obtained a building permit, your septic tank is ready to be professionally placed. The cost of a new septic system is determined by the size of your home, the kind of system you choose, and the material used in your septic tank. The following is a list of the many treatment methods and storage tanks that are now available, as well as the normal pricing associated with each.

Types of Septic Tank Systems

Septic system that is used in the traditional sense Traditionally, a septic system relies on gravity to transport waste from the home into the septic tank. Solid trash settles at the bottom of the sewage treatment plant, while liquid sewage rises to the top. Whenever the amount of liquid sewage increases over the outflow pipe, the liquid waste is discharged into the drain field, where it continues to disintegrate. This type of traditional septic system is generally the most economical, with an average cost of roughly $3,000 on the market today.

Drain fields for alternative systems require less land than conventional systems and discharge cleaner effluent.

Septic system that has been engineered A poorly developed soil or a property placed on an uphill slope need the installation of an engineered septic system, which is the most difficult to install.

It is necessary to pump the liquid waste onto a leach field, rather than depending on gravity to drain it, in order to ensure that it is equally dispersed across the land. The average cost of these systems is roughly $8,000.

Types of Septic Tanks

  • Septic system that is conventional Traditionally, a septic system relies on gravity to transport waste from the home to a holding tank. From there, the sewage is divided into layers, with solid waste settling at the bottom and liquid sewage rising to the top of the separation process. When liquid sewage reaches to the level of the outflow pipe, the liquid waste goes into the drain field, where it decomposes even more quickly than before. Standard septic systems are often the most economical, with an average cost of roughly $3,000 to install. Septic system alternatives Instead of employing naturally existing bacteria to break down waste, alternative septic systems use oxygen to accomplish so. An alternative septic system collects sewage in the same manner as a conventional system. When using alternate technologies, drain fields typically take up less space and discharge cleaner effluent. But this advantage comes at the expense of a higher price, with systems typically costing approximately $12,000 to purchase. Septic system that has been engineered. A poorly developed soil or a property placed on an uphill slope need the installation of an engineered septic system, which is the most difficult of the three. Engineered systems collect and segregate waste in a tank in the same way as alternative and traditional septic systems do. Instead of depending on gravity to drain the liquid waste, it is necessary to pump the waste into the leach field in order for it to be equally dispersed over the land surface. The average cost of these systems is around $8,000.

More information may be found at: Septic Warranty Coverage and Costs.

Using Your Septic Tank

It is important to maintain the area around your new septic tank’s drain field and to frequently check your tank using the lids included with it. Never use a trash disposal in conjunction with your septic tank since it might cause the system to clog. Additionally, avoid driving over the land where your septic tank is located or putting heavy gear on top of your septic tank or drain field to prevent damage. Most of the time, after five years of septic system use, you’ll need to arrange a cleaning and pumping of the system.

Send an email to our Reviews Team [email protected] if you have any comments or questions regarding this post.

Precast Concrete Septic Tanks vs. Plastic Septic Tanks

When it comes to selecting a septic tank for your property, there are several alternatives to consider. First and foremost, you want to be sure that the tank you choose has the appropriate capacity for your home. After that, you’ll want to be certain that you select a tank that will give years of dependable service for you and your family members. A precast concrete septic tank is the most suitable option. Precast septic tanks provide several advantages over other types of tanks, such as plastic, steel, or fiberglass.

See also:  What To Do After Septic Tank Is Pumped? (Best solution)

The Benefits Of A Precast Septic Tank

  • The tanks weigh a great deal. While this may be considered a disadvantage by some, we feel it is one of the most significant advantages of using carbon fiber over other materials. Because of the weight of the precast concrete septic tank, it will never “float” to the surface, which is something that certain lesser weight tanks may accomplish in certain scenarios. Precast concrete septic tanks have a specific gravity of 2.40, which makes them more resistant to buoyant forces than other septic tank materials. HDPE has a specific gravity of 0.97, which is very high. For anchoring structures composed of more buoyant materials, further labor-intensive and time-consuming on-site preparation is required. When selecting a septic tank for your property, it is important to consider the following factors: Precast septic tanks do not rust, which is a major concern. Steel tanks, as well as portions of some plastic and fiberglass tanks, are extremely susceptible to corrosion and failure. Unlike traditional concrete, precast concrete gradually gains strength over time. Other materials, such as steel or high-density polyethylene (HDPE), can degrade and lose their strength. The contents of precast concrete storage tanks may be pumped out without the risk of the tank collapsing. The process of installation is basic and uncomplicated. Shea Concrete offers a staff of tank installers that have completed hundreds of tank installations in the past. We are well-versed in site preparation and are capable of overcoming virtually any installation challenge. In addition, we have vehicles that are fitted with hoists and can even crane a tank over a house when necessary
  • Concrete, along with water, is the most widely utilized building material on the planet. This natural substance is non-toxic, ecologically safe, and comprised entirely of natural materials, making it an excellent choice for septic tanks. Concrete is employed in a variety of applications throughout the country and has no negative impact on the quality of groundwater or surface water. During the installation process, plastic tanks are susceptible to damage. In most cases, the installation process is to blame for tank failures
  • Precast concrete tanks can be made watertight if they are manufactured in accordance with the National Precast Concrete Association’s “Septic Tank Manufacturing” Best Practices Manual and/or ASTM C 1227, “Standard Specification for Precast Concrete Septic Tanks.” In accordance with these industry standards, which Shea Concrete adheres to, the required processes to be followed during the fabrication of waterproof tanks are specified. It is never acceptable to drive an automobile over a plastic storage tank. This may set restrictions on the location of the tank and leaching area on your land.

Why A Concrete Septic Tank?

Because of their size and weight, the tanks are extremely difficult to transport. While this may be viewed as a disadvantage by some, we feel it is one of the most significant advantages of using composite materials over other materials. A precast concrete septic tank will never “float” to the surface, as certain lighter-weight tanks can do in certain scenarios; instead, it will remain submerged. Precast concrete septic tanks, with a specific gravity of 2.40, outperform other septic tank materials when it comes to buoyant forces.

  1. When anchoring buildings composed of more buoyant materials, further labor-intensive and time-consuming on-site preparation is required.
  2. It is fairly common for steel tanks and components of some plastic and fiberglass tanks to corrode and fail.
  3. The strength and durability of other components, such as steel or HDPE, might decrease.
  4. Hundreds of tanks have been installed by the Shea Concrete team of installers.
  5. Whenever necessary, we can crane a tank over a home using one of our vehicles equipped with hoists.
  6. Septic tanks may be created out of this material since it is non-toxic, ecologically safe, and manufactured from natural elements.
  7. During installation, plastic tanks are susceptible to damage.
  8. The majority of plastic tank failures can be traced back to the installation procedure.
  9. It is never acceptable to drive a car over a piece of plastic tank infrastructure.

Your options for tank and leaching field location on your land may be limited as a result of this.

  • Strength improves with time
  • Durability
  • Ease of installation
  • Low susceptibility to damage during the backfill process

Shea Concrete Septic Tanks

The Shea Concrete Company has been building and installing precast concrete septic tanks for more than 65 years. Shea has a comprehensive variety of septic, cistern, and pump tanks in capacities ranging from 500 to 55,000 gallons, with the most of these sizes being transported by our company trucks, as well. Underground tanks for sewage storage that are safe and long-lasting are manufactured by us at a competitive price. If you are thinking about upgrading or installing a new system, we would be delighted to speak with you.

How Much Does a Septic Tank System Cost?

A Quick Look at Septic Tank Prices

  • Total cost: $3,900 on average
  • $1,500 to $5,000 on a sliding scale
  • Anaerobic septic tanks cost between $2,000 and $5,000
  • Aerobic septic tanks cost between $10,000 and $20,000
  • Gravity septic tanks cost between $1,500 and $4,000
  • Mound septic tanks cost between $10,000 and $20,000
  • Chamber septic tanks cost between $1,500 and $5,000
  • Conventional septic tanks cost between $2,000 and $5,000.

The wastewater generated by your household is teeming with potentially harmful germs. In order to properly dispose of waste and prevent it from backing up into your sinks and toilets, you must ensure that your septic tank is in good working condition. This Might Also Be of Interest to You: What Is the Difference Between a Septic System and a Sewer System? Everything you need to know about septic tank replacement, including how much it will cost, can be found in this article.

What Is a Septic Tank?

A septic tank is an underground chamber that is used to treat residential wastewater to a modest degree. It is intended to store wastewater for an extended period of time, allowing particles to settle to the bottom and oil and grease to float to the surface. After that, the liquid waste is filtered away.

How Much Does It Cost to Install a Septic Tank?

In most cases, a new septic tank system will cost you around $3,900 to install. It costs between $1,500 and $5,000 to install a conventional 1,250-gallon tank, which is the perfect size for a three- or four-bedroom house. This price includes the tank itself, which ranges in price from $600 to $2,100 or more depending on the size and kind. Workman’s compensation is included in the price of the installation and often ranges from $1,500 to $4,000.

Types of Septic Tank Systems

Septic tank installation and replacement costs are heavily influenced by the type of system that you select to use. Tanks come in a variety of shapes and sizes. Here are a few examples:

Anaerobic Septic System

Anaerobic systems are a popular alternative for many homes since they don’t require any additional electricity or chemicals to function properly. Anaerobic systems include microorganisms that do not require oxygen to exist and hence are called anaerobic systems. Solid waste is broken down by microbes, and any leftover liquid waste is pumped out and spread beneath the surface of the soil. The garbage is naturally recycled when the water seeps into the ground and returns to the environment. The installation of these devices is between $2,000 and $5,000.

Aerobic Septic System

Aerobic systems, in contrast to anaerobic systems, make use of microorganisms that do not require oxygen to live. To activate the bacteria in the tank, oxygen is injected into it, and the bacteria then feed on the solid waste. Aerobic systems perform effectively in soils that are unsuitable for other systems and in areas where the groundwater table is elevated.

It is an excellent choice for residences that are close to a body of water. Aerobic systems are more costly to install than anaerobic ones. Expect to pay anything between $10,000 and $20,000 for this service.

Gravity Septic System

Gravity septic systems employ gravity to filter and move water through the system. They must be put on a mild slope in order to allow water to flow without the use of a pump. The cost of installation ranges from $1,500 to $4,000.

Conventional Septic System

A standard septic system is comprised of a septic tank and a trench that serves as a drain field for the collection of waste. The trench is built on stone or gravel and is designed to allow water to move through it easily. In order to prevent sand or dirt from contaminating the clean soil, geofabric is laid over the top of the trench and secured in place. In order to function properly, a traditional septic system requires a huge amount of room. The installation of these devices is between $2,000 and $5,000.

Mound Septic System

If your groundwater table is close to the surface, a mound septic system is the most appropriate option for your situation. An area for the septic system is prepared, and a sand mound is built to allow effluent from the tank to be pumped into the mound in modest amounts. The sand then acts as a filter, preventing the water from reaching the soil and groundwater. This design necessitates a large amount of floor space. They’re also expensive to install since a sand mound needs to be built before they can be utilized.

Chamber Septic System

Chamber septic systems have lately gained popularity as an alternative to traditional septic systems. They are comparable to conventional systems, with the exception that plastic chambers, rather than gravel, are utilized in the drain field. These are less difficult to build and have a lower carbon footprint. The cost of installing them ranges from $1,500 to $5,000.

Septic Tank Materials

Another aspect that influences cost is the type of material used to construct your septic tank. The following are some of the most often seen materials:

Concrete

Concrete septic tanks are the most prevalent form of septic tank because they are extremely long-lasting and reliable. They can survive for 20 to 30 years if they are properly maintained. Concrete, on the other hand, may break with time. When concrete is reinforced with rebar, the strength of the concrete is increased when subjected to pressure. Because of its weight, installation is more difficult and necessitates the use of specialized equipment. The cost of a typical-sized concrete tank ranges from $720 to $2,050 dollars.

Fiberglass

Fiberglass does not deteriorate when utilized underground, and because it is nonporous, it will not support the formation of algae. Because of the tank’s modest weight, it is easy to install. You won’t have to worry about cracking since, unlike concrete, it will not expand or shrink as the weather changes. The typical cost of a fiberglass tank is between $1,600 and $2,000.

Plastic

Tanks made of plastic are lightweight and simple to install. They’re also fairly long-lasting. Plastic tanks range in price from $830 to $1,400 on average, depending on the kind.

Steel

In spite of steel’s strength and durability, septic tanks built of steel are susceptible to rust and collapse if not properly maintained.

As a result, several municipal governments have tightened their restrictions in order to discourage their usage. Typically, you’ll discover them in regions where the system was already in operation. If you are able to have one installed, they range in price from $900 to $9,900.

What Size Septic Tank Do You Need?

The size of your septic tank is normally decided by the number of bedrooms in your house. This is used to calculate the amount of water that will flow through the system on a daily basis. In general, the expense of a system increases in direct proportion to its size.

Two Bedrooms

The size of your septic tank is usually decided by the number of bedrooms in your house. When estimating how much water will flow through the system on a daily basis, this method is employed. In general, the cost of a system increases in direct proportion to the size of the network.

Three Bedrooms

A minimum of a 1,000-gallon water tank is required for a three-bedroom residence, which handles around 360 gallons of water each day on a daily basis.

Four Bedrooms

A bigger tank, with a minimum volume of 1,250 gallons, is required for a four-bedroom residence. It is capable of handling around 480 to 600 gallons of water each day. Additional Related Articles:

  • A tank with a minimum volume of 1,250 gallons is required for a four-bedroom house. This system can handle between 480 and 600 gallon per day. Articles that are related:

Septic Tank Repair Costs

It’s conceivable that only a certain component of your septic tank has to be replaced rather than the complete tank. Repairs and replacement parts can be purchased for a fraction of the cost of a complete system replacement. The following are some of the most often seen repairs:

Drain Field

Drain fields can get overloaded and flood, resulting in sewage backing up into toilets and sinks. The cost of replacing a drain or leach field ranges from $3,500 to $11,000.

Tank Pump

A replacement septic tank pump typically costs between $500 and $1,200.

Tank Filter

It is the most typical type of filter change that is performed by homeowners. It typically costs between $230 and $280.

Tank Lid

Concrete coverings and steel lids may break and corrode as a result of exposure to the elements. In most cases, you can repair a septic tank lid on your own for about $35 and $60. In most cases, having it changed by a professional is more expensive.

Tank Baffle

The baffle is responsible for directing wastewater through the septic tank. A replacement baffle piece will cost between $23 and $44 dollars.

Additional Factors to Consider

A septic tank can be built either below or above ground, depending on your preferences. Because of the amount of excavating and footing preparation required, installing a tank underground is a pricey endeavor. Underground septic tanks necessitate the construction of a drain field that can accommodate a soakaway. In addition, because the soakaway allows for part of the wastewater to drain into the ground, the tank will require less emptying over time. Over time, this might result in a reduction in your expenditure.

See also:  How Much Do Septic Tank Workers Make? (Correct answer)

Some demand that an inspector check and approve the site, which might result in a fee being charged to the homeowner.

How Long Does a Septic Tank Last?

The lifespan of a septic tank varies based on the material used and the type of system used. The lifespan of a septic tank might be reduced if the tank becomes clogged due to roots or floods from groundwater. Septic systems have a lifespan of 15 to 20 years on average. Maintaining your septic tank on a regular basis is the most effective approach to extend its life. Keep in mind that maintaining your tank entails more than just draining out the contents; it’s also crucial to have a professional evaluate your tank on a regular basis and perform routine maintenance.

In the event that you have a plan in place, you can call our 24-hour repair hotline anytime a covered problem develops. We’ll dispatch one of our locally based, licensed, and highly qualified professionals to complete the work for you right away.

Buying a Home With a Septic Tank? What You Need to Know

Published in February of this year A septic tank is one of those property features that might make prospective purchasers feel uneasy. A septic tank is a component of a home’s wastewater system that is often found in homes that are not served by municipal sewers. Instead, according to the Environmental Protection Agency, these stand-alone systems are meant to dispose of and treat the wastewater generated by a residence on their own (EPA). For anyone contemplating purchasing a property with a septic system, here are some often asked questions and answers to consider:

COUNT ON QUALITY COVERAGE.

Protect your assets and enjoy the peace of mind that comes with having Allstate insurance coverage. Request a quote Locate a representative.

How Does a Septic System Work?

With Allstate insurance, you may get the coverage you need and the peace of mind you deserve. Consult for a price Locate a real estate professional.

Is the Septic System Related to the Drinking Water System?

No. Many homes that have septic systems also have a private well to provide water. The septic system, on the other hand, is completely separate from the well. Rather of treating wastewater so that it may be consumed, its objective is to safely distribute it in a manner that prevents pollution.

What Differentiates One Septic System from Another?

According to the University of Nebraska-Lincoln, the size of the drainfield and the quality of the soil are the primary factors that distinguish one septic system from another. In addition, the drainfield must be large enough to accommodate the volume of liquid generated by a family. According to the Environmental Protection Agency, do not use a home’s toilet, sink, or disposal as a wastebasket for dental floss, coffee grinds, kitty litter, paint, or chemicals to avoid the chance of blocking the system.

How Often Should You Get Your Septic Tank Emptied?

To remove the sludge and scum from the septic tank, it is necessary to hire a professional to pump it. The frequency is decided by the size of the tank and the degree of activity in the home (how much wastewater is generated). According to the Environmental Protection Agency, most septic tanks should be emptied every three to five years. However, certain systems may require more frequent pumping – perhaps once a year if necessary.

What Are the Signs of a Failing Septic Tank?

Aside from routine pumping, the tank should be examined for leaks or obstructions on a regular basis. According to the Environmental Protection Agency, signs of a clogged system include foul odors that appear from time to time and fixtures that drain slowly or gurgle.

What About Maintenance Costs?

The size of the tank and drainfield, the accessibility of the tank, and the distance that waste must be taken for disposal all influence the cost of septic system upkeep. According to the Environmental Protection Agency, pumping a tank might cost between $250 and $500.

What Should I Do Before Buying a Home With a Septic System?

Learn about the laws in your state. Some states demand a septic system examination prior to transferring ownership. However, even if your state does not need an inspection, your lender may require one anyhow. As a rule, conventional house inspections do not involve an examination of the septic system. Zillow reports that an inspection may provide a detailed assessment of the system’s integrity, identify whether it is located at an appropriate distance from a well (to minimize contamination), and check the absence of invasive tree roots in the drainfield, which could cause damage to the system.

If you do need to replace your system, the cost might vary significantly.

Owning a property with a septic tank does not have to be a frightening experience. You will be able to enjoy your home for many years to come if you do regular maintenance and upkeep.

Related Resources:

Concrete Septic Tank with a Capacity of 1000 Gallon When it comes to septic systems, whether you’re in the market for a new system or just need a replacement tank, you’ve arrived to the perfect location. As part of our recent investigation into different types of septic systems that are available for your house, we decided that it would be a good idea to also investigate the many types of septic tanks now available on the market. The following are the three most common types of septic tanks that are easily accessible for installation: concrete septic tank with a capacity of 1000 gallons When it comes to septic systems, whether you’re in the market for a new system or just need a replacement tank, you’ve come to the correct spot!

Currently available for installation are three of the most popular types of septic tanks:

Check out these 6 septic systems available for your home.

Nowadays, most concrete septic tanks are sold with a two compartment design, as opposed to the earlier style one compartment tank that was more common previously. Two compartment tanks tend to perform a better job of filtering and separating waste than one compartment tanks, which is why septic experts advocate them over a single compartment tank. All compartments are constructed with access for cleaning and pumping, regardless of the number of compartments in the system. Because it can readily handle most 0-3 bedroom dwellings, a 1000 gallon septic tank is the standard size for domestic applications.

Heavy Duty Options

Many tanks are also available in “high duty” configurations, which generally have a reinforced top and bottom. Purchasing the heavy-duty version may be a wise decision in the case that a vehicle, agricultural equipment, or other large piece of heavy machinery passes over the tank area.

Installation Requirements

There are also “high duty” versions of several tanks that often contain a reinforced top. Purchasing the high-duty version may be a wise decision in the case that a vehicle, agricultural equipment, or other large piece of heavy machinery passes over the tank.

Lifespan and Durability

The method by which the concrete septic tank was constructed will have an impact on its long-term function. High-quality concrete, adequate water sealing, and the use of structural steel goods such as mesh and rebar will provide additional support, strength, and structural integrity to the structure. Keep in mind that concrete septic tanks are more prone to cracking and leaking than their plastic and fiberglass equivalents when exposed to exceptionally cold temperatures and pressures. Most concrete septic tanks have a lifespan of up to 40 years if they are constructed properly and serviced on a regular basis.

1000 Gallon Concrete Septic Tank

Septic tanks of 1000 gallon capacity or larger are the most typical size for household usage, as they can readily fit most 0-3 bedroom dwellings. Size Weight: The weight of each concrete tank is different. Some of the most common 1000 gallon concrete precast tanks are around 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh almost 9,000 lbs.

Others are approximately 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh almost 9,000 lbs. Here are some examples of Jensen Precast projects completed in various cities around the United States. Approximately 9 1/2 feet in depth, however this varies according on the distributor, state, and local statutes.

1250 Gallon Concrete Septic Tank

Generally speaking, a 1250 gallon tank is a good choice for mid-size homes with 3-4 bedrooms. Size and weight: The sizes and weights of all concrete tanks are different. 1250 gallon concrete precast tanks are typically 5′ 9″ x 8′ 6″ x 5’8″ in size, with some of the more common models being 5′ 9″ x 8′ 6″ and others measuring 5′ 8″. The typical weight of a 1250 gallon concrete tank is 11,000 lbs, however this might vary depending on the distributor. Approximately 11 1/2 feet in depth, however this varies according on the distributor, state, and local statutes.

1500 Gallon Concrete Septic Tank

Generally speaking, a 1500-gallon tank is the most popular size for large homes with five or more bedrooms. Size and weight: The sizes and weights of all concrete tanks are different. The dimensions of some of the most common 1500 gallon concrete precast tanks are around 6′ x 10′ 9″ x 5′ 5″ in length and width. The typical weight of a 1500 gallon concrete tank is 12,000 lbs, which is rather heavy. Approximately 12 feet in depth, however this varies according on the distributor, state, and local statutes.

Inlet Baffles

When installing a septic tank, an inlet baffle should be put on the inlet part closest to the point at which the sewer tank joins from the house structure to the tank. Due to the fact that it prevents scum and oils from blocking the entrance pipe, the inlet baffle is critical to the overall health and effectiveness of the septic system. The intake baffle is a bottle neck that is especially designed to do the following:

  • In order to prevent the breakdown process from being disrupted, it is necessary to slow the effluent entering the septic tank. A fast rate of inflow of effluent might cause problems by mistakenly combining the settled solid waste with oils, scum, and effluent. Make sure no sewage gases are allowed to enter the sewer line. These gases have the potential to infiltrate back into a home or structure, generating a foul odor.

Outlet Baffles

Every septic tank should be equipped with an exit baffle that is connected to the discharge line. The outlet baffle functions as a bottle neck in the same way as the inlet baffle, but in the opposite direction. It is meant to:

  • Preserving the septic tank by keeping scum, oils, and solid waste contained inside
  • It is necessary to prevent the discharge of waste items other than wastewater into the output pipe, drain field, and leach field.

All effluent from the septic tank must be clear of solid waste before it may be discharged. Other than that, the solids and oils will pollute the drain field/leach field and result in backups and pollutants entering the surrounding environment. Ensure that your baffles are correctly built and that they are not in need of repair by consulting with a licensed septic technician before doing anything else. Septic tanks made of fiberglass or polyethylene (polyethelyene) are also a suitable option, especially if your location has specialized environmental requirements.

Mobility

In contrast to concrete septic tanks, which normally need a vehicle equipped with a crane and boom, fiberglass and polyethylene septic tanks are quite simple to transport. Therefore, fiberglass and plastic tanks are frequently employed in places where concrete septic tank delivery vehicles are unable to reach the tanks.

The majority of fiberglass and plastic septic tanks weigh roughly 300 pounds or more, however concrete septic tanks can weigh up to 20-30 times as much.

Cost Effectiveness

If you’re seeking for a less expensive alternative to concrete, fiberglass and polyethylene (polyethylene) are excellent choices. The majority of fiberglass and plastic septic tanks are thousands of dollars less expensive than concrete septic systems.

Durability

When compared to a concrete septic tank, both plastic and fiberglass septic tanks have a lower likelihood of breaking. Furthermore, because fiberglass and plastic are nonporous materials, there is typically no problem with tree or bush roots growing into the tank and generating leaks as a result of root damage. Having said that, due to the tank’s smaller profile and lighter material composition, caution must be used during installation because heavy gear might easily harm it. Tanks made of fiberglass or plastic can be destroyed in the same way as concrete tanks can if too much weight is placed on the surface above them.

Despite the fact that plastic and fiberglass tanks are quite resilient, they can nonetheless leak under specific circumstances.

The size of the lot, the position of the tank, the amount of ground water, and the weather can all influence the selection.

Float

Plastic and fiberglass have a number of advantages, but they can also be troublesome. Yes, the lightweight character of these materials makes them perfect for installation, but same lightweight nature also results in a high level of buoyancy in the final product. It is possible that during a storm, a plastic or fiberglass tank can get dislodged from its couplings, causing considerable damage to the septic system and the homeowner’s property, with repair costs in the hundreds of dollars. A simple solution is to place a concrete slab on top of the tank to help weigh it down.

If you reside in an area with a high groundwater table, consult with a specialist to ensure that the higher water table will not cause harm to your fiberglass or plastic tank.

Leave a Comment

Your email address will not be published. Required fields are marked *