Where Is The Cleanout On A Septic Tank? (Question)

How Do I Find My Septic Tank Cleanout? When locating the home’s sewer line and where it leads out of the home, there will often be a cap that can be removed. This is where a cleanout for the sewer line that connects from home to the septic tank is located.

stepulessanitationservice.com

  • The cleanout pipe is a threaded cap on the outside of your house that is designed to help in the aid of cleaning the main line to your tank and to aid in the event of a backup. Here are some simple tips to help you find it: In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground.

What is a septic tank cleanout?

The septic systems cleanout is the short PVC pipe with removable cap that sticks out of the ground between your house and the septic tank. If the cleanout does contain backup, it could be from the septic system or it could be a blockage between the cleanout and the tank.

Should there be water in my septic cleanout?

If the water is standing in the pipe or overflows out the cleanout, then you know that the problem is from that point out. At this point you can either call your favorite septic company, or dig up the tank lids yourself and check the water level and solids content in the tank.

What does a drain cleanout look like?

A drain cleanout provides access to your main sewer line and is located outside of your home in the front or back yard. Cleanouts typically go unnoticed until there is a problem. They look like capped pipes sticking a few inches above the ground.

Where is the clean out located?

The cleanout is usually a 4-inch-diameter pipe with a screw cap that has a square knob or indentation on the top. It’s most likely going to be popping up from the ground outside your home between the foundation and the street. The cleanout might also be on the side of the home, closest to the bathroom.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

  • Your Drains Are Taking Forever.
  • Standing Water Over Your Septic Tank.
  • Bad Smells Coming From Your Yard.
  • You Hear Gurgling Water.
  • You Have A Sewage Backup.
  • How often should you empty your septic tank?

How do you clean out a septic tank drain line?

Simple Cleaning Agent — White vinegar is a better option, providing a natural cleaning agent that can help keep septic drains free from mold growth and odor. It is recommended that you pour one cup of vinegar down the drains weekly and let it soak for about a half hour, then flush it through the system with water.

How do I know if my septic line is clogged?

Signs of Septic System Clogging: Water and sewage from toilets, drains and sinks backing up into your home. Bathtubs, showers, and sinks draining slowly. Gurgling sounds present in the plumbing system. Bad odors coming from the septic tank or drain field.

Should sewer cleanout be capped?

Make sure your clean out cap is on. Almost all buildings do. It allows access to the sewer line in case there’s a problem. It’s usually located somewhere between your residence and the street. The cleanout cap is simply the part that keeps it covered.

How do you find a clogged sewer line?

Run the water in the sink closest to the toilet for about a minute. If the toilet bubbles (gurgles) or the water level in the toilet rises, you may have a clogged sewer line. When your washing machine drains, the toilet overflows or water backs up in the tub or shower.

What is a two way cleanout?

A two-way cleanout provides access in both directions. With this U-shaped cleanout, we are able to use it to access both the yard and the house lines.

What is a wall cleanout?

A plumbing cleanout can be used to access the drain pipes in a building. The cap can be removed to provide access. Most localities require the installation of cleanouts during the plumbing rough-in.

How To Install a Septic Tank Sewer Cleanout

  • PVC tee fitting
  • Tape measure
  • PVC 4-inch pipe
  • PVC pipe cap
  • PVC pipe cleaner
  • PVC pipe cement
  • Pop-off fitting (optional)
  • Shovel
  • Hacksaw
  • PVC tee fitting

A clean-out port in your drain pipes may save you a lot of time and money, as well as avoiding a potentially nasty issue in some situations. In the event of a blockage, a clean-out allows you to quickly and easily access the drain line, and in some cases, it can avoid flooding inside your house. If the clean-out is correctly installed, it may also be utilized for routine septic tank cleaning while pumping out the septic tank.

Step 1

Clean-out ports in your drain pipes may save you a lot of time and money while also preventing a potentially nasty problem in the future. In the event of a blockage, a clean-out allows you to quickly and easily access the drain line, and in certain cases, it can avoid flooding within your house. If the clean-out is correctly installed, it may also be utilized for routine septic tank cleaning when the tank is being pumped out for maintenance.

Step 2

3 to 6 inches deeper than the drain line should be dug out of the ground. In order to have enough space to work, you will also need to expose 3 to 4 feet of the pipe on either side. Remove any loose dirt from the drain line and make ensure that no water or appliances are running inside the house in order to keep the drain line as dry as possible.

Step 3

Remove a portion of pipe from the drain line by cutting into it. The length of the excised part should be the same as the length of the tee fitting. Make sure to account for the flange on the tee fitting, which will be used to enter the drain line on both ends of the fitting. Make use of the pipe cleaner to clean both ends of the drain line as well as the fitting on the end of the line.

Step 4

Connect the tee fitting to the drain line using the hose clamp. Place the fittings such that the open port is pointing upward when the fittings are closed. Make use of sufficient quantities of pipe cement to guarantee a firm and secure fit. Calculate the distance between the fitting and the ground level. A piece of PVC pipe should be cut to match this measurement and firmly glued into the tee fitting to complete the installation.

Step 5

Place the PVC pipe cap on top of the new pipe and tighten it down. It is recommended that you acquire a threaded cap so that it may be removed easily when service is necessary. A pop-out fitting is another option to consider. If there is a backup of water in the pipe, the weighted cap on this fitting will keep it securely in place. This will cause the insert to pop out and enable the water to drain outdoors instead of backing up into the house. These are not permissible in all jurisdictions, so verify your local codes before putting them in.

Tip

In order to protect the new pipe, place a PVC pipe cover on top of it. A threaded cap should be purchased so that it may be removed quickly and simply when service is needed. Alternative fittings include pop-out fittings and lever-style fittings. This fitting will be equipped with a weighted cap that will keep it firmly in place unless there is a backup of water in the pipe.

At that moment, the insert will spring out, allowing the water to flow outside rather than backing up into the house. These are not allowed in all jurisdictions, so make sure to check your local codes before installing them!

where is my septic cleanout?

Everything else that goes into a septic system, aside from waste water, should be contained within the tank itself. That is precisely what the tank is for. Sand and other heavy particles will sink to the bottom of the container, while sludge, grease, and other substances will float to the top. All of these “solids” should be removed at least once every five years, if not more frequently. It is recommended that the waste water only be discharged from the tank into a small distribution box and then to all of the perforated drainfield lines in the system.

  • A simple system in this location consists of a 1,000-gallon tank, a d-box, and 210 feet of drainfield line for up to three or four bedrooms.
  • The soil type and usage decide how much additional drainfield length is required.
  • If they were coming from a tank, the stench coming from a tank would be substantially greater than the stink coming from the other end of a drainfield line.
  • Mike

Septic Tank Clean-Out 101

Septic tanks of various shapes and sizes are pumped out by John Kline Septic Services. From residential to commercial to municipal work, there is something for everyone. Maintaining your septic tank is essential, whether you’re in need of a clean-out or you simply want to understand more about the procedure. To learn more, continue reading or contact us now to arrange service. We provide same-day service for emergencies, and our technicians are available 24 hours a day, seven days a week. Always In order to ensure that your septic tank gets cleaned out through the largest available opening, Your septic tank or system may have more than one entry point, depending on the type of tank or system you have installed.

  1. This is normally covered with a cement lid or manhole cover that is 18-24 inches in diameter and is often raised to grade with an extension.
  2. It also makes it difficult to completely clean out the tank, therefore it’s critical to ensure that your tank is well cleaned from the primary entry.
  3. In spite of the fact that we recommend that you have your tank pumped out every two to three years, depending on the size of your tank and the number of people living in your home, you may be able to extend the period between clean-outs without suffering any difficulties.
  4. When it comes to septic tank cleaning, we recommend that you never go more than FIVE years between cleanings to ensure everything is operating correctly and that your tank is filtering out waste in the appropriate manner.
  5. Ensure that your septic tank is easily accessible before scheduling your septic clean-out.
  6. Make a notation on your manhole cover or access port if it is hidden by your landscaping so that your technician can easily locate the cleanout when he or she arrives on site.
  7. Simply inquire or contact us in advance to inquire about the possibility of installing a riser at the time of your septic pumping.

Are you prepared to get your septic tank cleaned? We provide business and residential septic pumping services in Lancaster, Pennsylvania and the adjacent areas, including York, Lebanon, Berks, Chester, and Dauphin counties, as well as the surrounding areas. Make a call right now at 717-898-2333.

Sewer Clean Out for Residential Homes 101

a wooded trail / Photo courtesy of Fotolia Septic system failures can be prevented by utilizing a variety of fail-safes in contemporary plumbing. Your home is well-protected against sewage backups, with everything from drain traps to sump pumps and vent pipes. The sewage clean out is an extremely vital component of this system, and you should be aware of its existence. Despite its harmless look, having one or more clean outs in your home’s sewage line may have a significant impact on both the health of your sewer line and the health of your wallet.

What is a Sewer Clean Out?

In most cases, the sewer clean out is a capped pipe that is positioned on or near your property line and connects to the lateral sewage line. In plumbing, a lateral sewer line is a pipe that links the sewage lines in your house to either the municipal sewer system or your septic tank. Septic waste can back up into drains when the lateral becomes blocked, causing a nuisance as well as potential health risks for anyone who are exposed to it. Maintaining your sewer pipes and draining water in the event of a backup are two important benefits of having a clean out.

How to Find the Sewer Clean Out

On or near your property line, you will find the sewer clean out, which is a sealed pipe that connects to your lateral sewage line. Your home’s sewage lines are connected to the municipal sewer system or your septic tank by a lateral sewer connection. Septic waste can back up into drains when the lateral becomes blocked, causing a nuisance as well as potential health hazards for anyone who are exposed to it. An installed sewer clean out allows you to maintain your lines free and to drain water if you ever have a backup situation.

  1. The Sidewalk Should Be Checked– In many localities, the location where your lateral joins the municipal sewer line is indicated on the sidewalk. Along the curb and sidewalk, look for a letter ‘S’ that has been stamped or painted. If you come across this marker, you may easily visualize a straight line from the mark to your house, where the lateral may be located if you look closely. In certain situations, you may even be fortunate enough to come upon a clean out in the neighborhood of where you are looking. Search Near Your Foundation– In many circumstances, locating the sewer clean out near the road is impractical, or the home’s former owners elected to have more than one sewer clean out built. In these cases, you should search near your foundation. When you have a septic system in place, sewer clean outs are also typically positioned close to the home’s location. If you are more than three feet from the foundation, you will most likely find the cap anywhere between the road or septic tank and the point at which your home’s sewage line exits the foundation and enters the ground
  2. Look for extra clean outs inside– Some homes, particularly older ones, may have clean outs that are either hidden within the structure or protrude from the exterior walls of the structure. Check the basements, crawl spaces, and attic for probable vent pipe sites along with the vent pipe. Most of the time, indoor sewer clean outs will look to be a junction with one side of the Y or T shaped intersection being capped. These are important for keeping your interior pipelines in good condition, even if they are not essential.

What if the Property Lacks a Sewer Clean Out?

It is possible that older properties may not have a sewer clean out. The latter is particularly true if one is not obligated to do so by municipal or state plumbing regulations. It is typically preferable to have one installed in such situations. Sometimes your home has a clean out that has just been covered up by dirt, which is another situation. If you suspect the house has a clean out but have been unable to identify it, you may want to conduct some light digging along the ground where you assume the clean out should be in order to locate it.

Benefits of a Sewer Clean Out

While having a sewage clean out is mandated by law in certain jurisdictions, if you have an older property or live in a state where they are optional, you may find yourself without one. There are, however, various advantages to having a clean out installed on your home, including the following:

Lower Maintenance Costs

The clean out gives you direct access to the sewage lateral on your property’s property. This means that a plumbing professional may monitor the water flow from each individual faucet in your home to verify that there are no blockages or other pipe concerns during their monthly maintenance visits.

Cheaper and Easier Cleaning

When it comes to cleaning your sewage lines, a plumber would normally have to remove your toilet or perhaps climb onto the roof to do so.

They will have easier access to the sewage lateral if they have a sewer clean out performed. Because of the time and effort savings, you will have a lower overall bill.

Protects Your Landscaping

If you have a big clog, one advantage that only becomes evident in an emergency situation is the fact that a sewer clean out can assist eliminate the need to dig up your yard in the case of a clog. The sewer lateral, in contrast to many of the pipes within your home, is totally underground and cannot be inspected for wear or damage without digging the area where it is located. The sewer clean out serves as an entry point for your lateral, allowing it to be more readily examined and maintained.

See also:  How Much Does It Cost To Replace A Septic Tank? (Question)

BackflowPrevention

It can also be used as an external drain if a large amount of blockage is encountered. Taking the clean out cap off will allow you to drain the extra water, which will save your property from flooding. When there is an issue with the municipal sewer that is forcing water back up into your lateral, this may also be beneficial.

How to Install a Sewer Clean Out

It is necessary to complete many steps in order to install a clean out. Depending on the circumstances, your local municipality may provide programs to assist with the cost of installation, particularly in situations where a sewer clean out was not previously required by code. Before you begin, make sure you check for any available programs or grants, as well as any necessary permissions or licenses. It is also recommended to get expert assistance if you do not have prior experience splicing or installing sections of pipe in order to prevent making costly blunders.

Choosing a Clean Out Type

The first and most important step before starting any work is to choose the sort of sewer clean out you will be using. There are three alternatives accessible at the present time: Double Clean Out– The double clean out is the most common type of clean out used in contemporary installations. It contains two shafts that link to the lateral pipe in a ‘U’ configuration, making it the most common type of clean out used in modern installations. The cap that is closest to your home allows for simple access to the city end of the lateral, but the cap that is closest to the street allows you to preserve the house end of the lateral (see illustration).

Despite its T design, the test tee clean out provides access to both ends of the lateral, but it can be difficult to use for clearing obstructions owing to a 90 degree angle at the intersection.

Excavation and Installation

A segment of pipe will need to be excavated in order to find your lateral line. This can be accomplished using either conventional hand tools or leased equipment, with caution to avoid damaging the lateral pipe. As soon as you have completely exposed the required area of the pipe, you should measure out the length of pipe that will be removed. The type of cutting equipment you’ll need will depend on the material that your lateral pipe is constructed of. Once the undesirable portion has been removed, you will be able to measure, cut, and install the new junction section in its place.

Most of the time, it’s advisable to put a container box around the top to keep it from being overgrown or buried too quickly.

Professional Cleaning Cost with a Sewer Clean Out

Even while cleaning your own lateral line may appear to be a cost-effective choice, there is always the possibility of causing damage to the pipes. A professional plumber can complete the task more efficiently and at a lower cost if they have access to the sewage system through a sewer clean out. As a result, they use less tools and less effort than if they were required to dig up your yard or snake the lateral from an interior location of your property. With a basic estimate range of $99 to $900 and an overall average of $288, HomeAdvisorgives provides a reliable service.

When it comes to costs, CostHelper gives more specific estimates, with an estimated cost of snaking your lateral ranging from $148 to $900, with an average cost of $410.

Additional costs will include a video examination of the line, which will cost between $100 and $800.

Some plumbing businesses may quote you a fixed charge but then urge you to tack on extra services in order to raise the total cost of the job.

COMMON PROBLEMS — JT’s SEPTIC

You should examine the sewer cleanout on the exterior of the home if you are hearing gurgling and all of the house fixtures are clogged. This is often a black 3-4 in color “inch ABS pipe with a threaded cap is available. Remove the cap (WARNING: BE CAREFUL! (WARNING: IT MAY CONTAIN SOME PRESSURE!) : Assuming the sewage line is completely dry, you will have a clog inside the home plumbing, directly in front of the cleanout valve. Make a phone call to a plumber and have them rooter the line. Sewer line cameras are available from several rooter/plumbing businesses.

You have two options at this point: call your preferred septic provider or pull up the tank lids yourself and check the water level and solids content in the tank yourself.

Most tanks erected after January 2001 include a filter that has to be cleaned at least once a year (we clean filters—please call us).

We’ll even notify you once a year when it’s time to clean your filters!).

You should contact your favorite plumber if only one or two fixtures are clogged (for example, one toilet or a specific sink or shower). It’s likely that you have a blockage in your sewage system. In the event that your septic tank is backing up, we can assist you!

GURGLES

Whenever you flush the toilet, the water gurgles, the toilet takes an unusually long time to flush, or the water in the shower turns brownish after you have done the laundry, you are receiving a subtle indication that trouble is brewing. In order to determine when the tank was last pumped, look through your records and then contact your preferred septic provider for assistance.

ODORS

If you are experiencing unpleasant odors within your home, such as rotten eggs, it is likely that a trap or vent inside your home is not venting correctly. Call your plumber right away since these gases are harmful to both people and animals!

ODORS OUTSIDE IN THE YARD

At times, the smells emanating from the roof vents will seep into the yard due to meteorological conditions. Make use of a plumber to elevate the roof vents and/or to place a charcoal filter in the vents, as needed. It’s important to remember that your septic tank is vented via the roof.

SURFACING IN THE YARD

The smells from the roof vents can sometimes be carried down into the yard by the wind. Engage the services of a plumber to elevate the roof vents and/or install a charcoal filter in the roof vents. Keep in mind that your septic tank’s exhaust is vented through the ceiling.

HEAVY SOLIDS- OVERDUE FOR PUMPING

Contrary to common perception, you DO need to have your septic tank pumped on a regular basis. Pumping maintenance should be performed on a regular basis, otherwise your system will get overwhelmed with solid waste and eventually cause damage to your leach lines. DON’T MAKE THIS HAPPEN TO YOU! This is an extreme example of a tank that is overflowing. There is sewage flowing from the tank access holes and into the yard!

grease build up in sewer pipes

Fats and grease should never be flushed down the toilet or sink. They have the potential to harden the lines and cause failure; they have the potential to generate an excessive buildup of the floating scum layer in the septic tank; and they have the potential to go into the disposal regions and adjacent soils and completely block the system off. A shattered lid can pose a serious threat to both animals and children. It is conceivable that they will fall through the cracked or broken lids and will not be noticed until it is too late to save themselves.

crushed or settled pipe

This is the second most prevalent problem we notice in septic systems that are less than 10 years old. In addition to blocking flow, loose fill soil surrounding the tank is causing a backup into the house since it is pulling the pipe with it as it settles. We have even observed instances when contractors installing new systems do not correctly pack the fill earth below the pipe, resulting in pipe settlement on systems that have not been utilized or have only been used for a short length of time (see below for an example).

SEWER OUTLET PROGRESSION

When it comes to modern septic systems, this is the most typical issue we encounter. Take note of the fact that the unsupported outlet pipe is being driven down by settling dirt.

Watch as the water level in the tank rises, forcing the flow of water in the inflow sewage line to slow. This will eventually result in a clog in the inflow sewer line at some point. The solids flowing down from the house will not be able to enter the tank correctly because of the high water level.

examples of settled sewer pipes:

INSTALLATION OF A TANK AND/OR REPAIR OF SEWER PIPESTHE “POLY” PIPEIMAGES BELOW PROVIDE AN EXAMPLE OF WHAT PIPENOTTO USES WHEN INSTALLING A TANK AND/OR REPAIR OF SEWER PIPES However, despite the fact that this grade of sewer pipe is less expensive at the time of purchase, it might end up costing you a lot of money in the long run!

settled inlet sewer pipe on unused system:

Even if the septic system has not been utilized in some time, it is conceivable that problems will be discovered during the inspection process. Pipes might settle on unoccupied ground and in yards as a result of faulty installation and/or automobiles and/or ATVs running over the pipes without realizing they are there. It may be beneficial to all parties to have a skilled inspector take a look at the system and diagnose any concerns, even though the County does not require an examination on an underused system before transferring ownership.

Roots growing in and around the septic tank:

In addition to disrupting the system by clogging or destroying drainage and distribution lines, tree roots can also enter the tank, causing it to leak. Foul odors, poor drainage, and patches of vegetation in the leach field are just a few of the signs that you may have a root problem.

ERODED BAFFLES

Branches and roots may wreak havoc on the system, clogging or even damaging drainage and distribution lines, and they can even penetrate the tank in some cases. Foul odors, poor drainage, and patches of greenery in the leach field are just a few of the signs that your root system is failing.

orangeburg sewer pipes

Orangeburg pipe was made in Orangeburg, New York, from 1860 to 1970, and was utilized to plumb numerous septic and wastewater systems throughout Yavapai County during that time period. Orangeburg pipe is produced from rolled tar paper (wood pulp that has been sealed with hot pitch) and was considered a low-cost alternative to metal, particularly after World War II, because of its flexibility and durability. In fact, the pipe itself is so soft that professionals might cut it with a knife during the installation process!

Orangeburg, on the other hand, is known for degrading over time (it has a 50-year lifespan at the most) and deforming when subjected to pressure.

If the septic system is approved, Orangeburg will normally be stated on the permits as the material for the inlet and/or outflow pipe material, respectively.

FAQs — JT’s SEPTIC

Orangeburg pipe was made in Orangeburg, New York, from 1860 to 1970, and was used to plumb many septic and sewage systems in Yavapai County during that time period. It is no longer manufactured. When rolled tar paper (wood pulp sealed with hot pitch) is used to make orangeburg pipe, it is thought to be a low-cost alternative to metal, particularly after World War II. Tradesmen were able to cut the pipe with a knife during installation since it is so soft. During the 1970s, Orangeburg was phased out in favor of regular ABS, which increased the pipe’s lifetime and durability.

As the pipe deforms over time, it will become “egg-shaped,” and it will begin to blister and finally crumble away.

If you’d like to learn more about Orangeburg, make an appointment today or check out this article on azcentral.com to learn more about how Orangeburg has affected Valley region homes.

Should I Use Septic Tank Additives?

According to current research, there is no clear proof that these items can prevent septic system failure or that they will improve system function. The addition of compounds to a septic tank will not eliminate the necessity for routine tank cleaning. Septic tank cleansers, rejuvenators, and primers that are promoted as such will not hurt your system, but they will not benefit it either. However, there is already a large amount of bacteria in the tank that will break down waste products, so using enzymes or yeast would not hurt your system at all.

Septic system additives should be avoided, according to the North Dakota State University Agriculture Communication.

-Tank Refueling Station

what are the PVC pipes sticking up in my yard?

Septic tank cleanouts are often located between the home and the septic tank, and they are used to snake the input line from the house to the tank. If the PVC markers are labeled with “JT’s Septic,” they indicate that they are marking the access lids to your septic tank (buried directly under the labels). Alternatively, if the pipes are further away and appear to be arbitrarily arranged in relation to the house or tank, it is possible that they are inspection ports used to check the amount of liquid in the disposal area.

will household cleaning products harm my system?

The majority of specialists believe that the usual use of household cleaning solutions will not harm the system since it will not prevent the activity of bacteria in the tank from taking place as intended. A large amount of some chemicals, on the other hand, may interfere with the breakdown of wastes in the tank or cause the soil treatment area to get clogged. Please remember that the goods you use may ultimately make their way into the groundwater systems in your community.

How Often Should I Pump My Septic Tank?

Most tanks require pumping every 3-5 years, depending on the size of the tank, the amount of wastewater that flows into the tank on a daily basis, and whether or not the tank is equipped with a trash disposal. The state of Arizona currently does not have any laws requiring maintenance and inspection (with the exception of those pertaining to the sale of a home), but the Environmental Protection Agency and local health departments strongly recommend routine maintenance to help prevent groundwater contamination due to nitrogen, phosphorus, and disease-causing bacteria that can be found in wastewater.

I just had my tank pumped and it already looks full!?!

According to the size of the tank, the amount of wastewater that is discharged into it each day, and whether or not a trash disposal is used, most tanks need to be pumped every 3 to 5 years. The state of Arizona currently does not have any laws requiring maintenance and inspection (with the exception of those pertaining to the sale of a home), but the Environmental Protection Agency and local health departments strongly recommend routine maintenance to help prevent groundwater contamination due to nitrogen, phosphorus, and disease-causing bacteria that can be found in waste water.

Does anyone have to be home to have jt’s pump my septic tank?

We usually advise people to have someone at their house for our service, but it is not mandatory. Our service technicians are quick and fast when it comes to finding and pumping out a problem. We enjoy having a homeowner and/or a Realtor on site for our inspections so that they may discuss any concerns that we may discover. If we happen to miss you during our service, we are more than pleased to accept a credit card payment over the phone.

Does JT’s Septic do leach line work?

Having someone present for our service is usually recommended; however, it’s not mandatory. Locating and pumping are carried out by our service pros in a timely manner. We enjoy having a homeowner and/or a real estate agent present during our inspections to discuss any concerns that we may uncover. During our service, if we are unable to locate you, we will gladly accept your credit card payment over the telephone.

See also:  How Does A Septic Tank And Drain Field Work? (Solved)

Why can’t you pump my septic tank out of the sewer cleanouts?

We have found that a tank cannot be efficiently pumped through sewage cleanouts because the pumps on our trucks are just too powerful, and there is no way to get all of the scum and debris out of the tank through a cleanout. It is advised that the tank access lids be used in order to remove all liquid and particles from the tank and to examine the baffles. To empty the tank completely, we unlock all compartments and use a pump to remove the full contents of it. The fact that you do not pump via the primary access holes in the tank itself is a disservice to yourself and your system.

how do you know the size of my tank?

Our experts and inspectors can identify the size of the tank based on the form of the tank; tanks for a normal residence are generally 1,000 or 1,250 gallons in capacity, respectively (tanks may be smaller or larger depending on bedroom count, style of tank, etc). Our trucks are outfitted with clear sight glasses, allowing our specialists to keep track of the number of gallons they are extracting from your tank. Our specialists are also trained to measure the tank measurements on the job site in order to establish the approximate gallon capacity.

why do you recommend routine maintenance and frequent pump outs when I’ve not a had a problem in the last 10 years and I’ve never had my tank pumped?

Even while many homeowners are able to go several years over the suggested maintenance time without experiencing any problems, harm is gradually being done. Solids that are insoluble in water and cannot be broken down by natural microbes are stored in the tank. This builds up over time until the tank no longer has enough space to hold everything. As a result, the solids make their way to the drain field where they fill up the pores in the earth, causing poor drainage and, eventually, the failure of the septic system and drainfield.

How long will my septic system last?

All septic systems have a defined life span, which means they will ultimately cease to function. The length of time a system will survive is determined by the system’s size, installation, soil composition, the water table, neighboring trees and roots, the amount of usage and abuse, and, most crucially, the frequency with which it is maintained and pumped.

if I have a garbage disposal Can i use it?

Yes! It is OK to use the garbage disposal for a limited amount of time, such as for food crumbs that remain after doing the dishes. Pump outs will be more frequent if the disposal is used more frequently, which will result in higher costs.

The usage of a trash disposal can have a negative impact on your septic system by increasing the quantity of suspended particles that enter the system. Soil treatment areas can get clogged with suspended particles, which reduces the soil’s ability to remove waste.

CAN I FLUSH WET WIPESFEMININE HYGIENE PRODUCTS?

No! The presence of this problem is one of the most prevalent we see in tanks. Wipes and/or feminine hygiene items block sewer pipes and do not decompose properly in the holding tank, causing backups.

how often can i do laundry?

It is critical not to overburden your computer system. Instead of completing a large number of loads in a single day, try to spread them out over the course of a week. Doing no more than two loads of laundry every day – one in the morning and one in the evening – is advised.

Can I have a water softener system with a septic system?

It is unlikely that a water softener will cause damage to most septic systems, albeit they may necessitate the installation of a somewhat bigger tank disposal area.

Can We Drive Over Our Leach Field?

Neither driving on the leach field nor on the entrance and exit sewer pipes, nor on the septic tank, is suggested by the manufacturer. It is possible to restrict or slow down efficient evaporation by compacting the soil over the leach lines. Evaporation is a critical component of the drainage and disposal process. It is possible to induce settling and even rupture of sewage pipes by driving over them. It is possible to produce cracks in a tank by driving over it, especially if it is made of fiberglass or plastic.

do i have a septic systeM?

Neither driving on the leach field nor on the inlet and exit sewer pipes, nor on the septic tank, is encouraged by the city. It is possible to restrict or slow down efficient evaporation by compacting the soil over the leach lines. Evaporation is a critical component of the drainage and disposal processes. It is possible to induce settling and even rupture of sewage pipes by driving across them. Driving over the tank, especially if the tank is made of fiberglass or plastic, might produce cracks in the tank walls.

How do I find my septic system?

Once you’ve confirmed that you have a septic system, you may identify it by looking at your home’s “as built” drawing, inspecting your yard for lids and manhole covers, or calling us for assistance.

How Far Does The Tank Have To Be Away From The House?

Once you have confirmed that you have a septic system, you may identify it by looking at your home’s “as built” drawing, inspecting your yard for lids and manhole covers, or calling us for assistance.

An alarm is going off in my tank- what do I do?!

The sirens on certain alternative systems alert the homeowner to a possible problem prior to effluent or waste backing up into the house. The alarm may sound to warn a problem with the electrical system or a high quantity of liquid in the tank. A pump or float may be malfunctioning, in which case it is recommended to contact either JT’s or your alternate system maintenance provider for assistance as soon as possible.

Can I Plant A Tree Over My Leach Field?

No. Root invasion from trees is one of the most prevalent problems that affect septic systems today. Certain species of trees are extremely harmful to your septic system and should be avoided at all costs. Please check your local nursery for further information.

does jt’s provide portable storage tanks?

We’re sorry, but we don’t provide portable storage tanks at the present moment.

can jt’s facilitate a pipeline repair?

Yes!

We are capable of repairing and replacing sewer inlet and outlet pipes. Our main line sewer camera service may also be used to plan infrastructure maintenance, as well as to aid with any and all forms of repair work. Please contact us if you would like to book a service.

why do you suggest running a sewer camera down my line?

A difficult blockage may necessitate the services of more than one plumber. Pipe obstructions can be caused by a variety of factors, including tree roots, grease, aging pipes, and foreign items. Our power snakes and Ridgid sewer cameras are excellent tools for identifying problems such as the following: Pipes that are broken, cracked, corroded, or collapsed are considered damaged and must be repaired or replaced. A clog is caused by a deposit of grease or a foreign item that prevents the passage of water.

Joints that are leaking—the seals between pipes have failed, enabling liquid to leak through.

How to Find the Lid on a Septic System

All septic tanks eventually fill with sediments and must be pumped out on a regular basis in order to remain in excellent functioning order. If the tank’s lid is not on a riser at ground level and you are not the home’s original owner, you may be unable to determine where the lid is located. A typical septic tank is 4 inches to 4 feet underground, with all of its components, including the cover, buried between 4 inches and 4 feet underneath. This is true regardless of whether the septic tank is equipped with special risers that keep the lid flush with the surface of the ground.

Consult A Map

All septic tanks eventually become clogged with particles and must be pumped out on a regular basis in order to remain operational. Unless the tank’s lid is mounted on a riser at ground level and you are not the home’s original owner, you may be unable to determine where the lid is located. In the majority of situations, the whole septic tank, including the cover, is buried between 4 inches and 4 feet underground. This is true regardless of whether the septic tank is equipped with special risers that keep the lid flush with the ground.

Search For A Sign

Septic tanks are placed in such a way that they are as unnoticeable as possible on the land. After the grass has grown back after installation and some time has passed, it is possible that just a few visual indications will remain. Pay particular attention to the contours of your yard for any inexplicable high or low points that might suggest the presence of an underground storage tank.

Follow The Pipe

Installation of the septic tank takes place along the sewage line that runs from the house into the front yard. Locate the 4-inch sewage pipe at the point where it exits the home in the basement or crawl space, if it is there. Locate the same spot outside and make a note of it. Insert a thin metal probe into the earth, identify the 4-inch sewage line, and follow it across the yard, probing every 2 feet, until you reach the end of the property.

Septic tanks are required to be at least 5 feet apart from the home in all states except Alaska. The majority of them are between 10 and 25 feet distant. Whenever the probe makes contact with flat concrete, fiberglass, or polyethylene it indicates that the tank has been located.

Locate The Lid

The majority of septic tanks are rectangular in shape and measure around 5 feet by 8 feet. Investigate the tank’s circumference to determine its boundaries and outline the rectangle’s boundary using a pencil. A septic tank that was built before 1975 will have a single concrete lid that is 24 inches in diameter in the center of the rectangle. If the tank was built after 1975, it will have two covers made of fiberglass or polyethylene, centered at the ends of the rectangle and centered at the ends of the rectangle.

Call A Professional

Opening a septic tank is a job best left to the pros once the lid has been discovered. Concrete septic tank lids are extremely heavy, and many require the use of lifting tools to remove them completely. An open tank has the potential to release toxic gases. Anyone going around on the property who comes into contact with an exposed septic tank might be in risk. Because of the noxious vapors present in an open tank, falling into one can be lethal.

Mark The Spot

Make a note on the ground near where the tank was pumped by a professional and the lid was buried to serve as a reference in the future. In order to keep track of where you are, you should choose a hefty circular patio tile that is embedded in the ground. Additionally, draw your own map of the area and store it with your other important papers.

How to Clean a Septic Tank

Article in PDF format Article in PDF format Getting your tank filled is something you should prepare for. You may rely on us to assist you with the cleaning procedure! Unless properly maintained, septic tanks can get clogged with solids that are incapable of being broken down by bacteria, which can result in a costly systemic collapse. In order to maintain your tank clean, it is necessary to have frequent inspections and pumps performed on a regular basis. We’ll teach you how to uncover and clean your tank in this post, however you’ll need to hire a professional to pump the trash out.

  1. 1 Locate your tank. It is best to begin with the sewage pipe at the lowest level of your home if at all feasible. Follow the path it takes out of the house after it’s out of the house. It’s possible that your tank is buried in the ground. Identifying the tank now will save you time and money later on, regardless of whether you or an inspector clean the tank. 2 Remove the tank’s top by digging it out. It’s possible that your tank is buried underground. Take a shovel and clear away the dirt from around the top of the tank before the examination begins. Your tank will have an access port lid, which should be sturdy and well-secured when closed.
  • Step 1: Locate your water tank. At the event that it is possible, begin with the sewer line in the lowest level of your home. Follow the path it takes out of the home once it has left the building. The location of your tank may be unknown. It saves time and money to locate the tank immediately, regardless of whether you or an inspector clean the tank afterwards. 2 The tank’s top may be removed by digging around it. It is possible that your tank is buried beneath the earth. Take a shovel and clear away the dirt from around the top of the tank before the inspection takes place. It is likely that your tank will have an access port lid, which should be sturdy and secure.
  • Advertisement
  • s3 Cracks should be checked on the tank. Damaged areas should be checked all the way around the tank, including the inside. Cracks must be fixed by a professional once the tank has been pumped in order to prevent the system from failing. Keep an eye out for any corroded or damaged sections on the inlet and outlet pipes that are necessary for drainage. If your tank is equipped with a distribution box or a pump chamber, make sure everything is in working order.
  • In order to determine whether or not water from your home, such as from the toilet or washing machine, makes it into your tank and subsequently drains effectively, it is helpful to run some water from your home.
  1. 1Make a slit in a pipe. Begin with a ten foot (3 m) length of PVC pipe. Separate it into two sections: a six inch (15.24 cm) segment and a nine and a half foot (2.9 m) section, using a saw or PVC cutter
  2. 2 Glue the pipes together as a group. PVC cement should be poured into the elbow joint. Using the cement and joint, attach the smaller pipe to the top of the bigger pipe. A straight pipe will protrude straight to the right or left in a “L” configuration
  3. 3cap both ends of the pipe. PVC caps may be purchased at the same hardware shop where you purchased the pipes, cement, and cutters. 4 Attach the caps to the pipes so that they are tight and prevent water from flowing through them. Insert the stick into the hole as far as it will go. Assemble the scum stick by holding it in a “L” form with the smaller pipe at the bottom and facing out to one side. Reduce the pipe’s diameter until it can be held against the top layer of septic tank waste without breaking through
  4. 5 lowering the pipe Make a mark on the stick. Make a mark on the scum’s top point with a marker or a piece of masking tape. When the pipe is resting on top of the scum layer, make a mark at the point where the pipe spans from the ground to the very top of your tank
  5. 6Push through the scum layer until the mark is no longer visible. Push the stick all the way through the muck. Some people find it necessary to twirl the stick so that the pointed end bursts through. When you get to the bottom of the scum layer, you’ll see that the stick is traveling through water rather than through the resistive fat and oil layer. Continue to hold the stick against the bottom of the scum in the same manner as you held it against the top of the scum, keeping the smaller pipe flat and off to the side so that the stick takes on the shape of a “L”
  6. 7 Make a second mark on the stick. Once again, a marker or tape should be used to designate where the scum layer terminates. Make a note at the point where the pipe crosses the ground and enters the tank’s very top
  7. Eight Measure the distance between the markers. Carefully remove the stick and place it on a tarp to catch any drips. Make a note of the distance between the two marks you created and use a tape measure to measure it. This represents the depth of the scum level. When the fat and oil layer reaches barely three inches (7.62 cm) above the bottom of the exit pipe, the tank must be pumped to remove the remaining liquid. Advertisement
  1. 1Make a slit in a pipe. Partition a ten-foot (3-meter) length of PVC pipe into five-foot (1.5-meter) portions. In order to construct a secure two-part stick, glue the pipes together as shown in the diagram. Connect the two pipes together using a straight adaptor or a threaded coupler from the hardware shop, as shown. PVC cement should be used to secure the ends in the connection
  2. 3cap each end. PVC caps are also available at your local hardware shop. Put one on either end of your stick and twist them together. It should be tightened so that no sewage may enter the pipe
  3. 4 Wrap a piece of white cloth around one end of the stick. A white cloth, towel, sock, or Velcro can be used to make a mark on the sludge to indicate the level of the sludge. Wrap the material around one end of the pipe for up to three feet (.91 m) or the whole length of the pipe, whichever is shorter. 5Push the stick through the scum hole after securing the material with the Velcro backing, tape, or string. You can drill a hole in the top layer of the tank with a stick designed for testing its scum depth if you haven’t previously done so. Then drop the sludge stick through the opening until you feel it hit the bottom of the tank
  4. 6remain in position for three minutes while you do this again. Allow for a minimum of three minutes of resting time on the stick. The longer you keep the stick in your hand, the more likely it is that the sludge will stain your white material
  5. 7Remove the stick from your hand. Continue to bring the stick back up, keeping it steady as you pull it up through the hole you formed earlier in the process. You will not discolor the stick as long as you do not move it. Prepare the stain by spreading it out on the ground where it will not be ruined and where you will be able to wipe the stick afterwards
  6. 8Measure the stain. Make a note of the length of the stain starting from the bottom of the stick with a tape measure. In order to prevent the sludge or scum from occupying more than one third of the tank’s depth (approximately 12 inches or 30.48 cm high), the tank must be pumped. It is necessary to pump the tank if the sludge layer is within six inches (15.24 centimeters) of the bottom of the output pipes. Advertisement
  1. 1 Remove the cap from the tank. During your yearly checkup, lift the tank’s lid to have a better look inside. Remove the lid and look for the pipes that lead to the waste tank and the pipes that lead to the water supply. The baffles are contained within them, and they keep scum and sludge in place.
  1. 2Remove the filters from the machine. Put on a pair of rubber gloves for protection. Reach inside the outlet baffle using your hands, a rake, or a hoe to remove the obstruction. Take the filter out of the machine. Even though it may be brightly colored and have a handle on the end, if your tank has one, it will be located inside the outflow baffle. 3Rinse the filter thoroughly. Holding the filter over the intake side of the septic tank and spraying it with a hose or dipping it in a pail of water are both options. Check to see that all of the solids have fallen back into the tank or bucket. Fill the tank with any waste that has accumulated once you have done rinsing
  2. Inspect the filter for signs of wear and tear. Examine the filter for any cracks or particles that may be obstructing it. When the filter is not cleaned on a regular basis, it becomes clogged and ceases to function. It is recommended that you replace the filter if it is not cleanable or looks to be damaged. Looking around the edges of the filter is important whether you are putting the old filter back in or installing a new one. It’s possible that the filter has an arrow on it. Ensure that the filter is correctly installed so that the arrow points downwards into the drainage system. When the filter is securely seated in the baffle, replace the tank’s lid with a firm grip. Advertisement
  1. 1 Pump the tank once every several years or as needed. Many individuals make the mistake of assuming that the tank does not require treatment as long as the piping looks to be in working order. It is possible to save thousands of dollars in costly repairs by doing regular maintenance on your tank before sludge builds up and liquid drains cease to flow. Every one to three years, or whenever the sludge and scum levels have occupied approximately one-third of the tank’s volume or have approached the exit pipe, this should be performed.
  • A) Every several years, drain the tank Several individuals make the mistake of assuming that the tank doesn’t need to be treated so long as the piping looks to be in proper working condition. You will save thousands of dollars in costly repairs if you maintain the tank before it becomes clogged with sludge and liquid stops draining. Every one to three years, or whenever the sludge and scum levels have occupied approximately one-third of the tank’s capacity or have approached the exit pipe, this should be performed.
  1. 2Clean up the garbage. Pumping is accomplished by the use of a cast-iron pump that can be turned on and off. The pump takes out the particles that are unable to be broken down by bacteria and transports them to a holding container, such as the inside of a tanker. If you remove the sludge and scum, there is no need to add bacteria or water into the system. Waste disposal for septic tanks. Even if you attempt to pump out the tank on your own, you must dispose of the trash in accordance with local regulations. The trash must be transferred by tanker to a place determined by the government that is distant from water and locations where people congregate. As a result, it is preferable to leave it in the hands of a specialist. Advertisement
See also:  How To Seal Pvc Pipe To Concrete Septic Tank?

Create a new question

  • Question For what reason is it risky to clean up a septic tank? David Balkan is a licensed professional plumber who also serves as the CEO of Balkan Sewer and Water Main Service and the President of Balkan Sewer and Drain Cleaning, among other positions. With over 40 years of experience as an active owner of these businesses, David is well-versed in the challenges that arise with water service lines, sewers, and drain lines. David has served on the Executive Committee of the Sub Surface Plumbers Association of New York for more than 30 years and is now the Chairman of the Master Plumbers Council’s Committee on Plumbing. As a result of his expertise and solution-oriented approach, Balkan Sewer and Water Main Service has grown to become the biggest and most trusted sewer and water main service in New York City, and the recipient of the 2017 Angie’s List Super Service Award. Answer from a Professional PlumberExpert Sewer gas, which is prevalent in septic systems, has the potential to be lethal. It’s a quiet murderer that kills in a matter of minutes, therefore I strongly warn homeowners never to attempt to repair their own septic system. Employ the services of a professional to ensure your safety.

Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement

  • Every one to three years, have your tank examined and pumped out by a professional. A little amount of money spent on regular maintenance is preferable to dealing with a septic system that isn’t functioning properly. Higher water use, such as when numerous people reside in the house or when you use a hot tub, causes the tank to fill up more quickly. Non-waste items such as baby wipes and grease should not be disposed of. These clog the system and cause it to malfunction.

Advertisement

  • Advertisement

Advertisement

Things You’ll Need

  • A shovel, two ten-foot (3-meter) PVC pipes, a PVC cutter or saw, PVC cement, a PVC elbow joint, a PVC connector, and four PVC end caps A white cloth, a sock, or Velcro is recommended. Tarp, measuring tape, hose and bucket, baffle filter, etc.

About This Article

Summary of the ArticleX Maintaining the cleanliness of your septic tank will save you money on costly repairs down the road. Annual filter cleaning and tank pumping are required to keep your septic tank in good working order, but you may save money by doing it yourself. Generally speaking, your filter will be positioned in the tank’s exit baffle and will be brightly colored. Cleaning it is as simple as spraying it with water from the tank or submerging it in a pail of clean water for an hour or so.

The sludge and scum levels in your tank should be pumped out every one to three years, or whenever they reach a third of the total capacity.

Continue reading for additional information, including how to measure the sludge and scum depths in your septic tank. Did you find this overview to be helpful? Thank you to all writers for contributing to this page, which has been viewed 68,206 times so far.

Did this article help you?

When it comes time to have your septic tank cleaned out, there is one very crucial thing to consider.

“How much does it cost to pump a septic tank?”

The solution is not as straightforward as you may expect, but it is also not going to need the completion of a four-year degree to figure out. In order to wipe away years of buildup from your laundry, toilet, shower, sink, and jacuzzi, there are a few things that influence the amount you may have to spend for the “Mega Flush.”

Let’s get started.

First and foremost, you should be aware that septic tanks are analogous to individuals. They are available in a variety of forms and sizes, and their ages range from recent to ancient. Their health problems are also quite diverse, as are their demeanors and dispositions. Some are fearful and prefer to remain concealed from view, buried beneath the surface of the earth. People are more forceful, use prominent risers, flashing lights, and even audible alarm systems to alert others to their commanding presence in the room.

  1. The septic tank is still on the table, believe it or not.
  2. Let alone those who behave more like the adolescent who ate too many burritos for lunch and then insisted on releasing his farts in the center of your kitchen while you were attempting to cook supper!
  3. The clinical research “Various Personality Disorders Common to Septic Tanks” has been sponsored by Shankster Bros.
  4. But it is a discussion for another day.

The costs pertaining to the cleaning of a septic tank can be divided, (or multiplied), into 4-5 categories:

1.) The size of the tank 2.) The tank’s accessibility. 3.) The property’s geographic location in respect to the service area 4.) The frequency with which cleaning is performed 5.) Calculate the volume of the quantity of gallons

Let’s break these costs down:

As previously said, septic tanks are available in a variety of designs and sizes. Some people are surprised to learn that the septic tank sizing requirements for homes are based on the number of bedrooms, that the requirements for churches are based on the seating capacity of the auditorium, that the requirements for factories are based on the number of employees, and that the requirements for campgrounds are based on the number of campsites.

Current septic tank sizing requirement guidelines in Indiana are as follows:

Home has 5 bedrooms and a 1500 gallon tank. 4 bedroom house with a tank of 1250 gallons. a three-bedroom house with a 1000 gallon tank 750 gallon tank for a two-bedroom house 500 gallon tank for a one-bedroom house It’s worth noting that any jetted bathtub, such as a hot tub or jacuzzi, with a capacity greater than 125 gallons qualifies as an additional bedroom. Always keep in mind that many of the systems being installed today are equipped with a secondary tank that serves as a pump station, pumping your sewage out to the leach field or sand mound, where it is distributed through piping and receives its final treatment before being leached away into the earth.

As a result, you may have to clean two tanks at the same time.

2.) Accessibility of tank

Unfortunately, some septic tanks have been constructed in difficult-to-access locations. Consider the possibilities: beneath the deck, beneath the garage floor, beneath the new living room that was constructed a few years ago, beneath that enormous pine tree that I planted 40 years ago, and so on. Yes, we have witnessed each and every one of those scenarios, as well as countless more. The presence or absence of a Riser in your tank is another factor that affects accessibility. This is a pipe that is attached to the lid of your septic tank and extends to the surface of the earth below the tank.

This may necessitate digging in order to expose the tank’s access lid, which may incur additional costs.

Some service providers will charge you an additional fee if they have to use more than one length of pipe to reach your storage tank.

does not share this sentiment!

3.) Distance from the service area

According on the location of the client in relation to the service provider’s service area, many service providers charge on a sliding scale. Take, for example, Shankster Bros., which has its headquarters in Northern Indiana. A client in Kentucky will be charged more than a customer in Kosciusko, Whitley, Wabash, Fulton, Elkhart, or the adjacent counties if we get a call from that client.

4.) Frequency of cleaning

According to the location of the consumer in relation to the service region of many service providers, they charge on a sliding scale of prices. Among these businesses is Shankster Brothers, which is based in Northern Indiana. A client in Kentucky will be charged more than a customer in Kosciusko, Whitley, Wabash, Fulton, Elkhart, or any of the nearby counties if we receive a call from that consumer.

5.) Volume the amount of gallons

Customers with enormous amounts of garbage to dispose of, such as campers, big business establishments, and even wastewater treatment plants, may be required to do so at certain times. In this situation, it will be necessary to mention special price once more. So, when you phone the office to inquire about price, be prepared to provide the following information so that the receptionist can provide you with an accurate quote as promptly as possible:

  • The location of the property in need of cleaning services
  • The size of the septic tank, if it is known
  • And Whether your tank is equipped with an access riser or not.

Property’s address where cleaning services are required. (If known) the size of the septic tank; Whether your tank is equipped with an access riser or not;

A general average cost to clean out a septic tank in Northern Indiana is as follows, although you can see specific pricing varies according to the parameters I have outlined above:

Cleaning a 1000 gallon tank will cost between $200 and $300.00. Over 1000 gallons, per gallon, there is a 7 cent per gallon charge.

Fee for digging – $75.00 per hour Line cleaning costs between $225 and $300.00. Riser for retrofitting – $190.00 Whenever you want aseptic tank cleaning, pumping, or inspection, please do not hesitate to contact Shankster Bros. at any time of day or night.

Leave a Comment

Your email address will not be published. Required fields are marked *