What To Put In A Septic Tank? (Question)

Much like your stomach, septic tanks need good bacteria and enzymes to break down the solids that pass through it. These beneficial bacteria and enzymes can come from several sources, but our favorite is actually rotten tomatoes. These naturally occurring enzymes are proteins called Pectinase or Pectinolytic enzymes.

What chemicals are in septic tank?

• Septic tank chemicals consist of caustic chemicals that are either derivatives of acids or alkalis. Chemicals that are commercially available that are used for the wellness of your plumbing contain these same chemicals. Essentially, they are used to unclog the pipes.

What is the best thing to put in septic tank?

The products below represent some of the best septic tank treatments available in their respective categories.

• BEST OVERALL: Cabin Obsession Septic Tank Treatment.
• BEST BUDGET: Green Gobbler Septic Saver Bacteria Enzyme Pacs.
• BEST FOR CLOGS: Instant Power 1868 Septic Shock.

How do I keep my septic system healthy?

Do’s and Don’ts when maintaining your septic system

1. Regularly inspect and maintain your septic system.
2. Pump your septic tank as needed.
3. Keep your septic tank lids closed and secured.
4. Be water-wise.
5. Direct water from land and roof drains away from the drainfield.
6. Landscape with love.
7. Keep septic tank lids easily accessible.

Should I put chemicals in my septic tank?

Chemicals and other additives promoted to keep a septic system “healthy” or “free-flowing” or “nourished” are generally not required nor recommended by any known expert sources.

What you should never put in a septic tank?

Don’t put things that aren’t biodegradable into your septic tank system such as:

1. Cigarette butts.
2. Disposable diapers.
3. Paper towels.
4. Plastics.
5. Sanitary napkins or tampons.

What can break down poop in septic tank?

Yeast helps actively breaks down waste solids when added to your septic system. Flush ½ cup of dry baking yeast down the toilet, the first time. Add ¼ cup of instant yeast every 4 months, after the initial addition.

What will ruin a septic system?

Substances like motor oil, paints, varnishes, and floor wax will damage organisms in your tank. This bacterium is necessary to keep your soil and groundwater free from pathogens. Instead of putting these oils down the drain, refer to your city’s waste management for recommended guidelines to dispose of these chemicals.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

• Your Drains Are Taking Forever.
• Standing Water Over Your Septic Tank.
• Bad Smells Coming From Your Yard.
• You Hear Gurgling Water.
• You Have A Sewage Backup.
• How often should you empty your septic tank?

How do I increase bacteria in my septic tank?

Flush a packet of brewer’s dry yeast down one toilet on the bottom floor of your house once a month. The yeast will help add “good” bacteria to your septic tank and break down waste.

How can I increase bacteria in my septic tank naturally?

Homemade Septic Tank Treatment The ingredients required for this natural solution are the following: Water, Sugar, Cornmeal, and Dry Yeast. To concoct this mixture, first start by boiling roughly a half gallon of water. Add in 2 cups of sugar. The sugar will act as the first food your bacteria will eat!

How do I clean my septic tank naturally?

You can mix about a 1/4 cup of baking soda with 1/2 cup of vinegar and 2 tablespoons lemon to make your own natural cleaning agent. The baking soda will fizz up to help get the dirt and grime in your tub and drains. It’s a great cleaner and your septic system will thank you!

How often does a 1000 gallon septic tank need to be pumped?

For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.

Is RIDX bad for septic tanks?

So what’s the problem with additives like Rid-X? According to the EPA and the Ohio Department of Health, not only are additives like Rid-X not recommended, but they actually have a detrimental and potentially hazardous effect on your septic system’s waste treatment process.

Can you use bleach with a septic tank?

You might consider bleach to be a great cleaner to use for your septic system. Unfortunately, that mindset is a dangerous one to have because it’s usually recommended to avoid using bleach in your septic system. The chemicals within bleach can kill the bacteria that your septic tank relies on.

Are long showers bad for septic systems?

The long showers will put more water into your field which can over load your field and excess water/effluent can surface.

Does hair break down in a septic tank?

Why Hair is a Such a Problem It’s composed of tough strands of proteins similar to those in your fingernails, and it’s not easily broken down by bacteria. Even if it doesn’t for years in your septic tank, it’ll almost certainly last for longer than the 24-48 hours that it sits in your septic tank.

How to Care for Your Septic System

Septic system maintenance is neither difficult or expensive, and it does not have to be done frequently. The maintenance of a vehicle is comprised of four major components:

• Inspect and pump your drainfield on a regular basis
• Conserve water
• Dispose of waste properly
• And keep your drainfield in good condition.

Inspect and Pump Frequently

Inspection of the ordinary residential septic system should be performed by a septic service specialist at least once every three years. Household septic tanks are normally pumped every three to five years, depending on how often they are used. Alternative systems that use electrical float switches, pumps, or mechanical components should be examined more frequently, typically once a year, to ensure that they are in proper working order. Because alternative systems contain mechanical components, it is essential to have a service contract.

• The size of the household
• The total amount of wastewater produced
• The amount of solids present in wastewater
• The size of the septic tank

Service provider coming? Here is what you need to know.

When you contact a septic service provider, he or she will inspect your septic tank for leaks as well as the scum and sludge layers that have built up over time. Maintain detailed records of any maintenance work conducted on your septic system. Because of the T-shaped outlet on the side of your tank, sludge and scum will not be able to escape from the tank and travel to the drainfield region. A pumping is required when the bottom of the scum layer or the top of the sludge layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the bottom of the outlet.

In the service report for your system, the service provider should mention the completion of repairs as well as the condition of the tank.

An online septic finder from the National Onsite Wastewater Recycling Association (NOWRA) makes it simple to identify service specialists in your region.

Use Water Efficiently

In a normal single-family house, the average indoor water consumption is about 70 gallons per person, per day, on average. A single leaking or running toilet can waste as much as 200 gallons of water each day, depending on the situation. The septic system is responsible for disposing of all of the water that a residence sends down its pipes. The more water that is conserved in a household, the less water that enters the sewage system. A septic system that is operated efficiently will operate more efficiently and will have a lower chance of failure.

• Toilets with a high level of efficiency. The usage of toilets accounts for 25 to 30% of total home water use. Many older homes have toilets with reservoirs that hold 3.5 to 5 gallons of water, but contemporary, high-efficiency toilets consume 1.6 gallons or less of water for each flush. Changing out your old toilets for high-efficiency versions is a simple approach to lessen the amount of household water that gets into your septic system. Aerators for faucets and high-efficiency showerheads are also available. Reduce water use and the volume of water entering your septic system by using faucet aerators, high-efficiency showerheads, and shower flow restriction devices. Machines for washing clothes. Water and energy are wasted when little loads of laundry are washed on the large-load cycle of your washing machine. By selecting the appropriate load size, you may limit the amount of water wasted. If you are unable to specify a load size, only complete loads of washing should be performed. Washing machine use should be spread throughout the week if at all possible. Doing all of your household laundry in one day may appear to be a time-saving strategy
• Nevertheless, it can cause damage to your septic system by denying your septic tank adequate time to handle waste and may even cause your drainfield to overflow. Machines that have earned theENERGY STARlabel consume 35 percent less energy and 50 percent less water than ordinary ones, according to the Environmental Protection Agency. Other Energy Star appliances can save you a lot of money on your energy and water bills.

Properly Dispose of Waste

Everything that goes down your drains, whether it’s flushed down the toilet, ground up in the trash disposal, or poured down the sink, shower, or bath, ends up in your septic system, which is where it belongs. What you flush down the toilet has an impact on how effectively your septic system functions.

Toilets aren’t trash cans!

Your septic system is not a garbage disposal system.

A simple rule of thumb is to never flush anything other than human waste and toilet paper down the toilet. Never flush a toilet:

• Cooking grease or oil
• Wipes that are not flushable, such as baby wipes or other wet wipes
• Photographic solutions
• Feminine hygiene items Condoms
• Medical supplies such as dental floss and disposable diapers, cigarette butts and coffee grounds, cat litter and paper towels, pharmaceuticals, and household chemicals such as gasoline and oil, insecticides, antifreeze, and paint or paint thinners

Toilet Paper Needs to Be Flushed! Check out this video, which demonstrates why the only item you should flush down your toilet are toilet paper rolls.

Think at the sink!

Your septic system is made up of a collection of living organisms that digest and treat the waste generated by your household. Pouring pollutants down your drain can kill these organisms and cause damage to your septic system as well as other things. Whether you’re at the kitchen sink, the bathtub, or the utility sink, remember the following:

• If you have a clogged drain, avoid using chemical drain openers. To prevent this from happening, use hot water or a drain snake
• Never dump cooking oil or grease down the sink or toilet. It is never a good idea to flush oil-based paints, solvents, or huge quantities of harmful cleansers down the toilet. Even latex paint waste should be kept to a bare minimum. Disposal of rubbish should be avoided or limited to a minimum. Fats, grease, and particles will be considerably reduced in your septic tank, reducing the likelihood of your drainfield being clogged.

Own a recreational vehicle (RV), boat or mobile home?

If you have ever spent any time in an RV or boat, you are undoubtedly familiar with the issue of aromas emanating from sewage holding tanks.

• The National Small Flows Clearinghouse’s Septic System Care hotline, which may be reached toll-free at 800-624-8301, has a factsheet on safe wastewater disposal for RV, boat, and mobile home owners and operators.

Maintain Your Drainfield

It is critical that you maintain the integrity of your drainfield, which is a component of your septic system that filters impurities from the liquid that emerges from your septic tank once it has been installed. Here are some things you should do to keep it in good condition:

• Parking: Do not park or drive on your drainfield at any time. Plan your tree plantings so that their roots do not grow into your drainfield or septic system. An experienced septic service provider can recommend the appropriate distance for your septic tank and surrounding landscaping, based on your specific situation. Locating Your Drainfield: Keep any roof drains, sump pumps, and other rainfall drainage systems away from the drainfield area. Excess water causes the wastewater treatment process to slow down or halt completely.

Septic Tank Installation and Pricing

To process and dispose of waste, a septic system has an underground septic tank constructed of plastic, concrete, fiberglass, or other material that is located beneath the earth. Designed to provide a customized wastewater treatment solution for business and residential locations, this system may be installed anywhere. Although it is possible to construct a septic tank on your own, we recommend that you hire a professional to do it owing to the amount of skill and specific equipment required.

Who Needs a Septic Tank?

For the most part, in densely populated areas of the nation, a home’s plumbing system is directly connected to the municipal sewer system. Because municipal sewer lines are not readily available in more rural regions, sewage must be treated in a septic tank. If you’re moving into a newly constructed house or onto land that doesn’t already have a septic tank, you’ll be responsible for putting in a septic system on your own.

How to Prepare for Your Septic Tank Installation

Here are a few pointers to keep in mind to make sure your septic tank installation goes as smoothly as possible.

Receive Multiple Estimates

Receiving quotations from licensed septic tank installers and reading reviews about each firm using trustworthy, third-party customer evaluations should be done before any excavation or signing of any paperwork is done. Examine your options for a contractor and make sure they have the appropriate insurance and license, as well as the ability to include critical preparations such as excavation and drain field testing in their quotation.

Test the Soil and Obtain a Permit

For septic systems to function properly, permeable soil surrounding the tank must absorb and naturally handle liquid waste, ensuring that it does not pollute runoff water or seep into the groundwater. The drain or leach field is the name given to this region. Before establishing a septic tank, you are required by law to do a percolation test, sometimes known as a “perc” test. This test indicates that the soil fits the specifications established by the city and the local health agency. In most cases, suitable levels of permeable materials, such as sand or gravel, are necessary in a soil’s composition.

Note: If you wish to install a septic tank on your property, you must first ensure that the ground passes the percolation test. Prior to acquiring the land that you want to utilize for residential purposes, we recommend that you obtain a soil test.

Plan for Excavation

Excavation of the vast quantity of land required for a septic tank necessitates the use of heavy machinery. If you are presently residing on the property, be careful to account for landscaping fees to repair any damage that may have occurred during the excavation process. Plan the excavation for your new home at a period when it will have the least influence on the construction process if you are constructing a new home. Typically, this occurs before to the paving of roads and walkways, but after the basic structure of the home has been constructed and erected.

The Cost of Installing a Septic Tank

There are a few installation charges and additional expenditures connected with constructing a new septic system, ranging from a percolation test to emptying the septic tank and everything in between.

Percolation Test

A percolation test can range in price from $250 to $1,000, depending on the area of the property and the soil characteristics that are being tested. Ordinarily, specialists will only excavate a small number of holes in the intended leach field region; however, if a land study is required to identify where to excavate, the cost of your test may rise.

Building Permit Application

A permit will be required if you want to install a septic tank on your property. State-by-state variations in permit prices exist, however they are normally priced around $200 and must be renewed every few years on average.

Excavation and Installation

When you have passed a percolation test and obtained a building permit, your septic tank is ready to be professionally placed. The cost of a new septic system is determined by the size of your home, the kind of system you choose, and the material used in your septic tank. The following is a list of the many treatment methods and storage tanks that are now available, as well as the normal pricing associated with each.

Types of Septic Tank Systems

Septic system that is used in the traditional sense Traditionally, a septic system relies on gravity to transport waste from the home into the septic tank. Solid trash settles at the bottom of the sewage treatment plant, while liquid sewage rises to the top. Whenever the amount of liquid sewage increases over the outflow pipe, the liquid waste is discharged into the drain field, where it continues to disintegrate. This type of traditional septic system is generally the most economical, with an average cost of roughly $3,000 on the market today.

Drain fields for alternative systems require less land than conventional systems and discharge cleaner effluent.

Septic system that has been engineered A poorly developed soil or a property placed on an uphill slope need the installation of an engineered septic system, which is the most difficult to install.

It is necessary to pump the liquid waste onto a leach field, rather than depending on gravity to drain it, in order to ensure that it is equally dispersed across the land. The average cost of these systems is roughly $8,000.

Types of Septic Tanks

• Concrete septic tanks are long-lasting and rust-proof, but they are difficult to repair if they are damaged. It is possible that concrete tanks will cost up to $2,000 depending on their size. Plastic —While plastic tanks are cost-effective, they are also susceptible to damage. They are around $1,200 in price. Fiberglass —While fiberglass septic tanks are more durable than their plastic counterparts, they are susceptible to shifting or displacement if the water table rises to an excessive level. Depending on the model, these tanks may cost up to $2,000

More information may be found at: Septic Warranty Coverage and Costs.

Using Your Septic Tank

It is important to maintain the area around your new septic tank’s drain field and to frequently check your tank using the lids included with it. Never use a trash disposal in conjunction with your septic tank since it might cause the system to clog. Additionally, avoid driving over the land where your septic tank is located or putting heavy gear on top of your septic tank or drain field to prevent damage. Most of the time, after five years of septic system use, you’ll need to arrange a cleaning and pumping of the system.

Send an email to our Reviews Team [email protected] if you have any comments or questions regarding this post.

How to Install a Septic System

Documentation Download Documentation Download Documentation In rural regions of the nation where waste water treatment is not accessible, private on-site wastewater treatment systems (POWTS), also known as septic systems, are utilized largely to treat waste water. Gravity fed/conventional systems are divided into two broad categories: 1. gravity fed/conventional systems and 2. alternative (pump) systems, which include aerobic treatment units (ATUs.) In most cases, electric pumps are used in alternative systems.

However, in many health jurisdictions across the United States, it is still feasible for an individual property owner with heavy equipment operation skills to utilize a backhoe to establish a septic system on their land.

Steps

1. 1 Make a plan and design for your system. Performing a site survey and conducting a percolation (soil) test on the area where the POWTS is to be placed are both required initial steps in any septic system installation. In order to create a system, it is necessary to first gather information from surveyors and conduct a soil test. It is then possible to submit an application for the necessary permissions and approvals.

• The following are some of the conclusions from the site survey that have an impact on the design:

• Available space
• Terrain
• Intended purpose and projected water demand depending on the size of the residence or building that the system will serve
• Location of the well and/or nearby wells
• And other factors.

• The following are examples of soil test findings that have an impact on the design:

• The soil type and layering (sand, clay, rock, and where it is placed in relation to depth)
• The soil’s ability to drain and filter wastewater
• And the soil’s ability to drain and filter wastewater

1. 2Wait for clearance before proceeding. The system may be deployed once all of the relevant permissions and approvals have been obtained. Make certain that all of the steps listed below are carried out in accordance with all applicable laws, plumbing rules, and building codes. Advertisement

Please keep in mind that the following procedure assumes that the system is being installed for the first time and not as a replacement.

1. 1 Assemble the equipment and tools that will be used throughout the dig. You will require the following items:

• Backhoe, laser transit, and grade pole are all included. A 4″ Sch. 40 PVC pipe (and fittings, if necessary)
• A 4″ ASTM D2729 perforated pipe
• A 4″ASTM D3034 pipe and fittings
• A 4″ Sch. 40 vent cap and test cap
• PVC primer and adhesive
• A 4″ Sch. 40 vent cap and test cap The following tools will be required: Saw (either hand saw or cordless reciprocating saw)
• Hammer drill and bits (for drilling through walls if necessary)
• The following items are required: hydraulic cement (to seal surrounding pipe if pipe is going through wall)
• Shovel
• Stone measuring an inch and a half and cleaned (amount varies depending on system size)
• Tape measurements (both ordinary and at least a 100-foot-long tape)
• Septic fabric (cut to 3′ length or less from a roll)
• Septic tank and risers (concrete or plastic if allowed)
• Riser sealant such as Con-Seal (for concrete) or silicone caulk (for plastic)
• A septic filter (such as a Zoeller 170 or similar) if one is necessary
• A distribution box (either concrete or plastic, if more than two laterals are being run)
• And a septic tank.

• 2 Determine the location of the entrance to the building in relation to the location of the septic tank. Make an excavation at least 2 feet deep and drill a hole through the wall, or go deeper and drill a hole beneath the footing, depending on your preference or the need. Because this is precisely what a gravity-fed system is designed to accomplish, expect the flow to continue to flow downhill from here. When transferring waste from the tank to the drain field, it does not employ any mechanical methods other than gravity.

• The pipe should be 4″ Sch. 40 and should extend at least five feet outside the structure toward the tank, either through the wall or beneath it. Set it level where it will pass through a wall or under a footing, and from there, run it with approximately 1/8″ of pitch (slope) every foot of length toward the septic tank until it reaches the tank. If necessary, go even farther into the tank or all the way into the tank. If this is the case, switch to 4″ 3034 with the appropriate adaptor and pipe 3034 toward the tank.

• Make sure you use a test cap on the end that will be entering the building. It is recommended that if you are going through a wall, you seal the area around the hole with hydraulic cement both inside and outside
• Do not run too much pitch out to the tank. If there is an excessive amount, the water will run away quicker than the sediments, resulting in the solids remaining in the pipe. Additionally, depending on the depth of your drain field and how close it will be to the tank’s outflow, there may not be enough pitch to get to the drain field.

• 3 Dig a hole large enough to accommodate the installation of the concrete aerobic tank below ground. Make use of the laser transit to “shoot” the top of the pipe that leads out to the tank with the laser. The distance between the top of the intake and the bottom of the tank is measured in feet and inches. To the number you fired off the top of the pipe, add this (go up on the grade pole) + 1 1/2″ to get the total. The depth of the grade pole has now been adjusted to the desired depth. Using this, continue to drill the hole to the desired depth

• Prepare your leech field by laying it out and excavating it according to the results of the test performed during the permit application procedure. Maintaining a good flow between the tank and the drain field should be considered when planning out and digging the tank.

1. 4Use “inch-and-a-half cleaned drain rock” from a neighboring gravel dump to surround the pipe, which is required in most areas. This is necessary in order to keep the pipe stable. For further information on the size of embedment and gravel required, check with your local health department. Five-inch perforated pipe in a gravity drain field does not have a slope from one end to another and has capped ends
2. Once you have received a green sticker from the health inspector, you must cover the pipe and tank. All places, subject to the restrictions of the local health authority, will be required to cover the drain rock with a specific filter fabric, newspaper, four inches of straw, or untreated construction paper before backfilling. Advertisement

1. A pump chamber after the septic tank should be installed The pump chamber, also known as a pressure tank or dosing tank, is where the electric pump is housed, which is responsible for transporting wastewater from one location to another and finally into the drain field for final disposal.

• Set up the pump chamber in the same manner as you would a septic tank. The effluent pump and floats are housed in the pump chamber, and they are responsible for pumping the effluent out to the drain field at predetermined or scheduled intervals. This is a hermetically sealed system. To ensure that the electrical installation complies with state standards, it is frequently necessary to hire a qualified electrician. It is important to remember that in places with high groundwater, the pump chamber or additional ATUs may remain essentially empty for long periods of time, and that these tanks may need to be safeguarded from floating by the installation of additional weight or other protective features.

1. Secondly, all construction details, including the layout of all sewers outside of the home, the location and depth of all tanks, the routing and depth of pressurized effluent lines, and other system components, such as the drain field and any additional ATUs, must be consistent with the septic system plans approved by the local county health department. Cover the tank and pressurized lines once the inspector has given his final clearance and the system has been turned on. Advertisement

Create a new question

• Question I had a tank put, but it isn’t level with the ground. What will be the ramifications of this, and should it be leveled? It is necessary to keep the tank level. It is difficult to predict what it will have an impact on because we do not know which direction it is off level. Question Is it necessary to be concerned about tree roots growing into the drainage area when using a gravity flow kind of tank? Whether or whether you have lateral lines is dependent on the kind of trees that are growing close or above them. Tree species that tend to extend roots into the lateral lines and obstruct them are known as ramifications. Due to the fact that they are buried deep in the ground and surrounded by a pocket of gravel that allows waste water to drain out, they are rarely affected by grass, weeds, and shrubs. Question What is the maximum depth that a pipe may be lowered into the leech bed? The majority of systems require 12 volts “in the form of rock The perforated pipe should be suspended in the top area of the rock
• It should not be touching the rock. Question Maintaining a lush green grass on or above your pitch is it safe, or is it a good practice? According to what I’ve heard, brown or dead grass is preferred so that your field can breathe more easily. It is necessary for your field to take a breath. The presence of green grass across your field indicates that it is functioning well. With lush grass covering your field, it will be able to breathe. There should be no planting of woody shrubs or trees over the leach field. Question What is the recommended distance between the septic tank and the house/boundary? A minimum of fifty feet is required. States have different laws, but this is the most common distance
• Nonetheless, other states have stricter laws. Question What is the average amount of soil that goes into a residential leach field? It is dependent on how chilly it becomes. There are no less than 12 in the northern United States “in the leach field’s surface
• Question Is it possible to build a septic system during the cold months? What you should do will depend on whether or not you reside in a place where the ground freezes. Question What amount of water should I put in the tank to get it going? None. A typical tank holds 1,000 gallons and will fill up quite quickly if used on a regular basis. When liquid effluent is discharged to the drain field, the goal is to catch and pre-treat particles that have accumulated. It is possible that a pump system will require water to prime the pump. Question There is a misalignment between my septic field’s underground line and the pipe on the tank. Is it OK to utilize a 90-degree elbow on my septic tank? As long as you have decent downhill flow, you should be fine. Instead of using a 90, I would use two 45s. Question If I’m installing a septic system, when should I contact an inspector? Immediately following system installation but before earth is used to cover the system in place Always check with the inspector ahead of time to verify that they can satisfy your inspection needs

More information on the replies Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement

• The use of aerobic bacterial additions (which are available at most DIY stores) to maintain a healthy and well functioning system, as suggested by producers on a periodic basis, is contentious. The septic tank is an anaerobic (wet) environment in which the majority of yeasts and other additions will have little or no effect on the sewage being processed. When it comes to installing septic tanks, some old school installers believe that placing an additive, a shovel of muck, or even a dead cat in an empty tank will “start” the process. What naturally enters the tank serves as the only thing that is necessary. The aerobic (wet or dry) component of the system consists of hundreds of square feet of drain field, where additives will do little help even if they make it all the way to the end of the system. The use of chemicals in septic systems has not been the subject of an independent research that has been published in a respectable scientific publication anywhere in the world, including this nation. This will mostly certainly be confirmed by your local health department. Each phase of the building process will almost certainly include an examination by a health inspector before the work can be completed or covered up. On pressurized lines, the use of a sand embedment is recommended in order to reduce the amount of damage caused by moving soil that has a high concentration of clay. When pumps are turned on and off, pressurized lines might move as well. Four inches (10.2 cm) of sand bedding on all four sides of the lines will prevent sharp pebbles from the ground or backfill from wearing holes in the pipe over time
• And

Thank you for submitting a suggestion for consideration! Advertisement

• Keep the perforated pipe for the leech field in a vertical position while installing it to avoid having the holes in the pipe turn downward. It is necessary to lay the perforated drain field pipe ASTM 2729 dead level, so that the printed line on the pipe is facing up. The perforations on both sides of the pipe are on both sides of the pipe. All of the sections of perforated pipe are cemented together, and the ends of each leach line are capped to complete the installation. So, when waste water enters the pipe, it will fill the pipe to the height of the perforations and overflow from ALL of the holes, utilising the whole leach field as a means of treatment. In certain health authorities, you can utilize waste water to water grass or decorative plants, trees, vegetable gardens, and fruit trees if you place the perforated pipe on a slope. However, the water must first be cleaned by the system (tertiary treatment includes disinfection) in order to prevent pathogens (germs) from the septic system from being discharged into the environment throughout the process. Make sure to check with your local health authority to verify if the practice known as “reuse” is permitted in your community.

Advertisement

Things You’ll Need

• The following tools are required: backhoe tractor, trencher, shovel, contractor’s laser level and rod, or a surveyor’s transit. Septic tanks
• PVC pipe with perforations
• Material for embedding
• PVC adhesive, PVC fittings, and a septic tank outlet filter are all included. Hand saw
• Course file
• Sandpaper If necessary, effluent pumps and floats are installed. If an alternate system is used, a control panel is installed.

About This Article

The writers of this page have together authored a page that has been read 498,182 times.

Did this article help you?

Septic tank systems are notoriously difficult to maintain and may be quite expensive when they fail. Over the course of almost two decades, we’ve only had to pump our septic tank once. Here’s how we maintain our system running smoothly: DIY Septic Tank Treatment

Natural Enzyme Action

Septic tanks, like your stomach, require the presence of beneficial bacteria and enzymes in order to break down the particles that travel through them. It is possible to obtain these helpful bacteria and enzymes from a variety of sources, but one of our favorites is rotting tomatoes. These naturally occurring enzymes are proteins known as Pectinase or Pectinolytic enzymes, and they break down pectin.

Lipase, hydrolyzes, and lyase are all members of the pectinase family of enzymes that are capable of breaking down pectin and plant cell walls in the natural environment, therefore aiding in the decomposition and recycling of waste plant materials.

DIY Septic Tank Treatment

It is simple and inexpensive to treat a septic tank with DIY solutions. We “feed” our septic tank 3-4 rotting tomatoes every 3 months or so, which we do through our garbage disposal. The idea is to make sure that you split up the tomato and pass only half a tomato or so at a time through the water while it is running to ensure that it is properly flushed out. As an alternative, if you don’t have access to a garbage disposal, you may throw two or three large rotting tomatoes in a bag (chances are they’re already packed away in a bag in your refrigerator and starting to liquefy anyway!).

Dump them into a toilet (but don’t use bleach!) and flush them away.

Normally, having rotten tomatoes every few months isn’t a big deal because the garden overproduces in the spring, summer, and fall, and there are always a few extras available.

At the very least, they aren’t going to waste completely.

Toilet Paper No-No’s

When we had our septic system pumped for the first time in more than two decades, we were assured that it was totally unnecessary because the system was operating well and looked fantastic. During our conversation, the gentleman shared numerous true horror stories of systems he’d witnessed at his place of employment where the families utilized “fluffy” toilet paper. That one where the cute little bears in the advertisements are pleased of themselves for not having any lint left behind? You know the one I’m talking about.

Image courtesy of Ian Haycoxis (CC BY-NC-ND 2.0).

He especially inquired about the brand of tissue we use, which is Scott Tissue.

Alternatively, if you don’t happen to have any rotting tomatoes on hand, you may use baking or brewing yeast to bring healthy bacteria to your tank as an alternative.

How to Clean Septic Tank Naturally

Yeast and sugar are excellent natural septic tank cleaners, and here’s an easy method for using them.

Septic Tank Cleaner

2 cups granulated sugar 5 cups of hot water (optional) 3 tbsp. active dry yeast Sugar and yeast should be dissolved in water. Pour the mixture into a toilet (that does not contain bleach!) and flush it. This is best done at night so that the yeast may continue to work throughout the night; do not flush for at least 3 hours after completion.

Additional Tips:

1Avoid flushing raw or cooked meat down the toilet, down the garbage disposal, or any other form of introducing meat into your septic system; meat is NEVER a helpful bacterium. 2. Never add oils, grease, or fat in any form (solid or liquid) to your tank. This includes, but is not limited to, cooking oils, bacon grease, meat grease from draining ground beef/turkey, and other fat-containing foods. 3Avoid flushing anything other than garbage and toilet paper down the toilet; this means that feminine products should be disposed of in the trash, baby diapers and wipes should be disposed of in the trashcan, and so on.

Even while such personal wipes claim to be safe for the septic system, they take a very long time to degrade and are thus ineffective. Have you tried the rotten tomato technique yet? Mention@Budget101com Alternatively, Budget101 can be tagged.

Love this DIY Septic Tank Treatment Idea? Pin it!

Every editorial product is chosen on its own merits, while we may be compensated or earn an affiliate commission if you purchase something after clicking on one of our affiliate links. As of the time of writing, the ratings and pricing are correct, and all goods are in stock.

Maintaining a home’s septic system may seem like a daunting and stinky task, but it’s really not. Being mindful of what you’re doing inside the home will keep the system healthy.

Preventing and treating problems with your septic system is not difficult and does not have to be expensive. Failure to maintain your septic system, on the other hand, might result in significant financial loss, since digging up and rebuilding a septic system can cost tens of thousands of dollars.

What Is a Septic System?

Because it handles all of the wastewater that comes from your home, including the water from the bathrooms, kitchen, and laundry room, if your home is not connected to a municipal water and sewer system, your septic system is essential. Septic systems are generally comprised of a tank, into which wastewater is channeled for treatment and the particles are separated from the liquid. Microorganisms break down the organic stuff in wastewater, allowing it to be recycled. A perforated pipe system transports wastewater from there to a drain or leach field, which collects the effluent.

Get Familiar With Your Septic System

Understanding how your septic tank works, what sort of system it is, and where it is placed are all important first steps in proper maintenance. The county or town should keep a record of the permit, as well as a chart showing the tank’s layout and placement, because state rules demand a permit for septic system installation. Visual clues, such as sewage covers, or the direction in which the sewer pipe, which is located in the basement, runs out of the home, may be able to assist you in your search.

Have It Pumped Routinely

Every three to five years, the ordinary residential septic system should be pumped (that is, the sediments should be removed). According on the size of the tank, the typical price of pumping a residential septic tank is between $300 and $600. When you contact a septic service company, they will also inspect your septic tank for leaks and evaluate the sludge layers in your tank for any problems. Remember to save a copy of any maintenance paperwork pertaining to work performed on your septic tank.

Spread Your Washing Machine/Dishwasher Usage Throughout the Week

You may believe that scheduling a “laundry day,” during which you wash all of your clothing and possibly even run your dishwasher, would save you time. However, it puts a great deal of strain on your septic system. If you don’t allow your septic system enough time to process the wastewater, you risk overloading the system and flooding your drainfield with wastewater. Replace this with doing a full load of laundry (to ensure that you are not wasting water) a couple of times a week.

Don’t Treat Your Toilet Like a Trash Can

The only item that should be flushed down the toilet that does not come out of your body is toilet paper. Everything else should be discarded. This implies that there will be no tissues, diapers, feminine items, hair, dental floss, or anything else. Toilet paper is supposed to decompose in the septic tank after it has been used. Any additional materials are not permitted; they will clog and cause harm to your septic tank.

Make sure you use toilet paper that is safe for use with your septic system. Some of the luxurious, pricey ones that include lotions and additional plys may clog your system or introduce unwelcome substances into it.

Think About What You Dump Down the Kitchen Sink Drain

We flush a variety of items down the kitchen sink that might cause serious damage to a septic system. Never flush objects down the sink drain, including coffee grounds, eggshells, medicine, produce stickers, flour, and other such items. All of these things can clog pipes and cause screens to get obstructed. Do not dispose of any oil, including cooking oils and paint, grease, and fat since these substances will block your sewer line and cause it to back up into your home. Even dairy products such as milk, cream, and butter are harmful if they are flushed down the toilet.

When you use a garbage disposal in conjunction with a septic tank, the ground-up food particles contribute to the layer of solids that accumulates at the bottom of the tank’s bottom.

Be Careful With Cleaning Chemicals

Cleaning agents that homeowners use can be harmful to the beneficial microorganisms in their septic systems. When washing textiles, avoid using harsh chemicals such as bleach. If you absolutely must, use only a little quantity of the product. Use of drain cleaners is discouraged since, in addition to destroying beneficial bacteria, they can cause harm to the tank itself. Alternatively, if a plunger does not work, a toilet drain snake, which is also effective on clogged kitchen and bathroom sinks, may be used.

Quaternary ammonia is also present in antibacterial soaps and disinfectants, which should be avoided.

Protect Your Drainfield

As previously said, proper management of your drainfield begins with careful monitoring of water consumption and the materials that enter your septic system. Never drive or park a vehicle on top of your drainage system. Make certain that gutters and sump pumps discharge water far enough away from the drainfield to prevent flooding. Avoid growing trees and bushes in close proximity to the drainfield since the roots of these plants might interfere with the pipes.

Maintain Your Septic System Naturally

On December 5, 2020, the information was updated. However, while this isn’t an enjoyable topic for polite discussion, having your septic system back up into your home is far from pleasant. There are actions that you can do to not only avoid septic issues in the future, but also to guarantee that the process of breaking down flushed waste proceeds as it should.

A Well-Functioning Septic System

The title of this article may be “The Care and Maintenance of the Gut in Your Yard,” which would be more descriptive. Understanding the necessity and advantages of eating dietary fiber, alkaline-forming foods, and taking probiotics for your own gut health will help you recognize the similarities between keeping a healthy septic system and maintaining a healthy digestive system. There are some items that you should avoid putting into any septic system, just as there are certain substances that are favorable to putting into our own digestive systems.

If you wait until there is a problem, you have waited too long and should contact a septic cleaning firm to pump your tank immediately. Slow water drainage, as well as water backing up in the toilet, dishwasher, tub, or sinks, are signs that you may have a septic system problem.

Septic System Care and Maintenance Tips:

• A family of four living in a house with a 1,000-gallon tank should have their septic system cleaned every four years, according to the EPA. Inquire with your local septic cleaning firm about how frequently you should contact them
• Avoid using bleach-containing solutions to clean your toilets since it kills the bacteria that are necessary for the breakdown of waste particles in your septic system. Try this all-natural toilet cleanser
• It works great.

• When you add yeast to your septic system, it helps to aggressively break down waste particles, which is beneficial. Using the first time, flush a 12-cup package of dried baking yeast down the toilet. After the initial addition, add 14 cup of instant yeast every 4 months for the next 4 months. For those who are planning to install or have their existing septic system pumped, it’s a good idea to know precisely where it is in your yard so that you don’t have to dig up a lot of your lawn when the system is pumped in the future. With a tape measure, measure the precise distance between the septic tank lid and the home, and then snap a photo of the exact distance with your mobile phone to prove you were accurate. Maintain a copy of the snapshot in a home maintenance file on your computer for future reference.

Deborah Tukua

Deborah Tukua is a natural living and healthy lifestyle writer who has written seven non-fiction books, including Naturally Sweet Blender Treats. She lives in Hawaii with her family. Since 2004, she has contributed to the Farmers’ Almanac as a writer.

Keep Exploring

Your septic tank is one of the last things you want to have to think about when you’re trying to relax. Many people are intimidated and perplexed when it comes to understanding how to properly break down solid waste in a septic tank. For those who live in homes equipped with sewage systems, however, there are several things you should be aware of in order to avoid worse difficulties down the road.

How Do I Know If I Have a Septic Tank?

This information would have been provided to you as part of the inspection process when you purchased your house. If it’s been a while and you’re not sure where you reside, take a look around your surroundings. Homes in rural regions are frequently equipped with a septic system and septic tank. You can also do the following:

• Take a glance around your yard and see if there are any strange peaks in the horizon
• Find out if any of your neighbors have one and where it is positioned in their yard by speaking with them. Consider looking at your water bill
• If you don’t have one from the county, you’re very certainly on a septic system. If you want a copy of your property records, you should contact your local government.

In this blog post, you will learn more about how to determine if you have a septic tank.

How Do I Take Care of My Septic System?

Following your discovery of the presence of a septic tank and its location, you’re undoubtedly asking how to properly maintain the tank. The naturally present bacteria in your septic tank are responsible for dissolving and consuming the solid waste in your tank. This is the type of beneficial bacteria that you require to keep your septic tank system operating correctly. Once this happens, the liquid in your tank flows into your drain field through small holes in the pipes. An examination of your septic tank will be one of the first things you’ll want to conduct after you’ve moved in.

1. You’ll also want to make certain that you’re utilizing goods that are safe for your system to utilize.
2. This toilet paper has been specially engineered to break down quickly and efficiently in your septic system.
3. You should avoid flushing any inorganic items down the toilet, regardless of how little they are.
4. Things like diapers, feminine hygiene items, and excessive toilet paper can cause a septic backlog if they are flushed down the toilet.
5. It is effective at destroying bacteria on your hands, but if you flush too much of it down the toilet, it can kill the beneficial bacteria in your septic system.

How Do I Break Down the Solids in My Septic Tank?

In order to properly size a septic tank, you must first determine its capacity. It is important to know the size of your tank in order to ensure that you are utilizing the proper quantity of septic tank treatment for your septic tanks. It is possible to damage the healthy bacterial environment that is necessary for your septic system to work efficiently when you use dangerous chemicals for septic tank treatment in bigger septic tanks. Additionally, employing a treatment that is intended for smaller septic tanks will not produce the results you are looking for.

The majority of septic tank treatments are recommended to be performed once a month.

Please keep in mind that we are not discussing drain cleaners here, but rather treatments.

When it comes to keeping the amount of solids in your septic tank stable, the bacteria that live in your septic tanks are critical.

It can also cause problems with your pipes, drain field, scum layer, and the entire septic system if not handled properly. Select the septic tank treatment that is most effective for your needs. Some things you may do to assist in the breakdown of solid waste in your septic tank are as follows:

Active Yeast

Using your toilet bowl as a vessel, add 14 to 12 cup of active dry yeast and flush it down the toilet. It is important for your pipe yeast to have time to sit in order for it to function properly, so avoid doing things like running your dishwasher or having a shower that will wash the yeast down too soon. Yeast is beneficial in septic systems since it helps to keep the bacteria and enzymes happy.

Rotten Tomatoes

It may sound a little unusual, but they contain proteins called pectinase that help them digest food. These substances degrade pectin and the cell walls of plants. All of this contributes to the breakdown of solid waste and the recycling of waste plant components, which are all beneficial to your septic system. Reduce the size of your rotting tomatoes to little bits and flush them via your waste disposal. Make careful to run some water down the drain as well to avoid clogging your pipes with debris.

Hydrogen Peroxide

This used to be a typical tip for helping to break down the particles in your septic tank, but it is no longer recommended. It takes some time to ensure that the solution is suitably diluted before using it. This isn’t something you see recommended very frequently anymore because it may be quite detrimental to the soil and cause problems with your drain field.

Inorganic Acids

While they are quite effective at clearing obstructions, they can be detrimental to your septic tank’s health. The bacteria in your tank can be killed by them, resulting in raw sewage leaks and a far more serious issue down the road. It is also possible that these strong chemicals will cause damage to the pipes and walls of your sewage system.

Chemicals

If you want to aid in the breakdown of solid waste in your septic tank, you can purchase chemicals to add to your tank. Make sure you follow the instructions on the label to avoid causing any harm to your septic system.

Pumping

One approach to ensure that the particles in your septic tank are being removed is to have a professional come pump your septic tank. Pumping your septic tank can be a time-consuming task that should be done as part of your overall septic tank maintenance plan. Prepare for the possibility of having your septic tank pumped. During the process of extracting the garbage and sludge, there is an unpleasant odor. In order to maintain your septic tank operating effectively, periodic pumping can be an excellent component of your septic tank treatment strategy.

What Happens When My Septic Tank is Full?

Due to the inability to view your septic tank, you may be wondering how you will be able to tell when your septic tank is full. It’s not one of those things that you can just put behind you and forget about. Plan to have your septic tank cleaned out every three to five years, as recommended by the EPA. This reduces the likelihood of a sewage backlog occurring. The Environmental Protection Agency has also issued a similar rule in this regard. It’s critical to cooperate with certified specialists to ensure that your septic tank, drainage field, or septic system is not damaged in the process.

As disgusting as it may sound, this is a standard technique of keeping your septic system in good working order.

In addition, our staff will come out to empty your septic tank.

When you give us a call, one of our pleasant and knowledgeable staff members will be happy to provide you with a free estimate. We can also plan your septic tank pumping in the Atlanta region to ensure that your septic system is operating correctly at all times.

How Much Does a Septic Tank System Cost?

A Quick Look at Septic Tank Prices

• Total cost: $3,900 on average
• $1,500 to $5,000 on a sliding scale
• Anaerobic septic tanks cost between $2,000 and $5,000
• Aerobic septic tanks cost between $10,000 and $20,000
• Gravity septic tanks cost between $1,500 and $4,000
• Mound septic tanks cost between $10,000 and $20,000
• Chamber septic tanks cost between $1,500 and $5,000
• Conventional septic tanks cost between $2,000 and $5,000.

The wastewater generated by your household is teeming with potentially harmful germs. In order to properly dispose of waste and prevent it from backing up into your sinks and toilets, you must ensure that your septic tank is in good working condition. This Might Also Be of Interest to You: What Is the Difference Between a Septic System and a Sewer System? Everything you need to know about septic tank replacement, including how much it will cost, can be found in this article.

What Is a Septic Tank?

A septic tank is an underground chamber that is used to treat residential wastewater to a modest degree. It is intended to store wastewater for an extended period of time, allowing particles to settle to the bottom and oil and grease to float to the surface. After that, the liquid waste is filtered away.

How Much Does It Cost to Install a Septic Tank?

In most cases, a new septic tank system will cost you around $3,900 to install. It costs between $1,500 and $5,000 to install a conventional 1,250-gallon tank, which is the perfect size for a three- or four-bedroom house. This price includes the tank itself, which ranges in price from $600 to $2,100 or more depending on the size and kind. Workman’s compensation is included in the price of the installation and often ranges from $1,500 to $4,000.

Types of Septic Tank Systems

Septic tank installation and replacement costs are heavily influenced by the type of system that you select to use. Tanks come in a variety of shapes and sizes. Here are a few examples:

Anaerobic Septic System

Anaerobic systems are a popular alternative for many homes since they don’t require any additional electricity or chemicals to function properly. Anaerobic systems include microorganisms that do not require oxygen to exist and hence are called anaerobic systems. Solid waste is broken down by microbes, and any leftover liquid waste is pumped out and spread beneath the surface of the soil. The garbage is naturally recycled when the water seeps into the ground and returns to the environment. The installation of these devices is between $2,000 and $5,000.

Aerobic Septic System

Aerobic systems, in contrast to anaerobic systems, make use of microorganisms that do not require oxygen to live. To activate the bacteria in the tank, oxygen is injected into it, and the bacteria then feed on the solid waste. Aerobic systems perform effectively in soils that are unsuitable for other systems and in areas where the groundwater table is elevated. It is an excellent choice for residences that are close to a body of water. Aerobic systems are more costly to install than anaerobic ones.

Gravity Septic System

Gravity septic systems employ gravity to filter and move water through the system. They must be put on a mild slope in order to allow water to flow without the use of a pump. The cost of installation ranges from $1,500 to $4,000.

Conventional Septic System

A standard septic system is comprised of a septic tank and a trench that serves as a drain field for the collection of waste. The trench is built on stone or gravel and is designed to allow water to move through it easily.

In order to prevent sand or dirt from contaminating the clean soil, geofabric is laid over the top of the trench and secured in place. In order to function properly, a traditional septic system requires a huge amount of room. The installation of these devices is between $2,000 and $5,000.

Mound Septic System

If your groundwater table is close to the surface, a mound septic system is the most appropriate option for your situation. An area for the septic system is prepared, and a sand mound is built to allow effluent from the tank to be pumped into the mound in modest amounts. The sand then acts as a filter, preventing the water from reaching the soil and groundwater. This design necessitates a large amount of floor space. They’re also expensive to install since a sand mound needs to be built before they can be utilized.

Chamber Septic System

Chamber septic systems have lately gained popularity as an alternative to traditional septic systems. They are comparable to conventional systems, with the exception that plastic chambers, rather than gravel, are utilized in the drain field. These are less difficult to build and have a lower carbon footprint. The cost of installing them ranges from $1,500 to $5,000.

Septic Tank Materials

Another aspect that influences cost is the type of material used to construct your septic tank. The following are some of the most often seen materials:

Concrete

Concrete septic tanks are the most prevalent form of septic tank because they are extremely long-lasting and reliable. They can survive for 20 to 30 years if they are properly maintained. Concrete, on the other hand, may break with time. When concrete is reinforced with rebar, the strength of the concrete is increased when subjected to pressure. Because of its weight, installation is more difficult and necessitates the use of specialized equipment. The cost of a typical-sized concrete tank ranges from $720 to $2,050 dollars.

Fiberglass

Fiberglass does not deteriorate when utilized underground, and because it is nonporous, it will not support the formation of algae. Because of the tank’s modest weight, it is easy to install. You won’t have to worry about cracking since, unlike concrete, it will not expand or shrink as the weather changes. The typical cost of a fiberglass tank is between $1,600 and $2,000.

Plastic

Tanks made of plastic are lightweight and simple to install. They’re also fairly long-lasting. Plastic tanks range in price from $830 to $1,400 on average, depending on the kind.

Steel

In spite of steel’s strength and durability, septic tanks built of steel are susceptible to rust and collapse if not properly maintained. As a result, several municipal governments have tightened their restrictions in order to discourage their usage. Typically, you’ll discover them in regions where the system was already in operation. If you are able to have one installed, they range in price from $900 to $9,900.

What Size Septic Tank Do You Need?

The size of your septic tank is normally decided by the number of bedrooms in your house. This is used to calculate the amount of water that will flow through the system on a daily basis. In general, the expense of a system increases in direct proportion to its size.

Two Bedrooms

A septic system with a minimum of a 750-gallon septic tank is required for a two-bedroom residence.

However, in many localities, a 1,000-gallon tank is the least capacity that may be accommodated.

Three Bedrooms

A minimum of a 1,000-gallon water tank is required for a three-bedroom residence, which handles around 360 gallons of water each day on a daily basis.

Four Bedrooms

A bigger tank, with a minimum volume of 1,250 gallons, is required for a four-bedroom residence. It is capable of handling around 480 to 600 gallons of water each day. Additional Related Articles:

• How to keep the cost of septic tank pumping to a bare minimum
• 3 Symptoms of Sewer and Septic System Problems
• Do you have a clogged sewer line? Here’s What You Should Do
• Water Sewer Line Repair: Do It Yourself or Hire a Professional
• Listed here are 15 common plumbing problems that every homeowner should be aware of.

Septic Tank Repair Costs

It’s conceivable that only a certain component of your septic tank has to be replaced rather than the complete tank. Repairs and replacement parts can be purchased for a fraction of the cost of a complete system replacement. The following are some of the most often seen repairs:

Drain Field

Drain fields can get overloaded and flood, resulting in sewage backing up into toilets and sinks. The cost of replacing a drain or leach field ranges from $3,500 to $11,000.

Tank Pump

A replacement septic tank pump typically costs between $500 and $1,200.

Tank Filter

It is the most typical type of filter change that is performed by homeowners. It typically costs between $230 and $280.

Tank Lid

Concrete coverings and steel lids may break and corrode as a result of exposure to the elements. In most cases, you can repair a septic tank lid on your own for about $35 and $60. In most cases, having it changed by a professional is more expensive.

Tank Baffle

The baffle is responsible for directing wastewater through the septic tank. A replacement baffle piece will cost between $23 and $44 dollars.

Additional Factors to Consider

A septic tank can be built either below or above ground, depending on your preferences. Because of the amount of excavating and footing preparation required, installing a tank underground is a pricey endeavor. Underground septic tanks necessitate the construction of a drain field that can accommodate a soakaway. In addition, because the soakaway allows for part of the wastewater to drain into the ground, the tank will require less emptying over time. Over time, this might result in a reduction in your expenditure.

Some demand that an inspector check and approve the site, which might result in a fee being charged to the homeowner.

How Long Does a Septic Tank Last?

The lifespan of a septic tank varies based on the material used and the type of system used. The lifespan of a septic tank might be reduced if the tank becomes clogged due to roots or floods from groundwater. Septic systems have a lifespan of 15 to 20 years on average. Maintaining your septic tank on a regular basis is the most effective approach to extend its life. Keep in mind that maintaining your tank entails more than just draining out the contents; it’s also crucial to have a professional evaluate your tank on a regular basis and perform routine maintenance.

In the event that you have a plan in place, you can call our 24-hour repair hotline anytime a covered problem develops. We’ll dispatch one of our locally based, licensed, and highly qualified professionals to complete the work for you right away.