What Is A Septic Tank Baffle? (Solution found)

The baffle sits inside the top of the tank, and all the waste water enters the tank underneath it. The baffle then acts almost like an upside down sieve, keeping all the solids and fats in the tank, and ensuring that only water can escape into the soakaway system.

septictankcare.net

  • A septic tank baffle is part of the tank’s inlet and outlet on the pipe. The baffles are found inside the tank on either side of the pipes inlet and outlet. The function of the septic tank baffle is to help with the flow of the wastewater.

Does a septic tank need baffles?

Inlet baffles are needed for proper performance of the septic tank. Raw sewage from the residence is directed by the baffle downward into the middle zone of the septic tank. This means the effluent follows a tortuous path through the tank, which provides the necessary detention time for the larger solids to settle out.

How much does it cost to replace a baffle in a septic tank?

Repairing a baffle costs $300 to $900 on average. You may pay more if it’s tough to access. The baffle helps to prevent buildup in the incoming or outgoing pipes of the tank. Between the baffles is where the heavier solid matter settles.

How long do septic baffles last?

Inspectapedia estimates that a steel tank baffles will rust out in 15 to 20 years and may collapse if driven over, but a concrete tank will last 40 years or more as long as the wastewater is not acidic. It’s important to consider the life expectancy of a drain-field, too.

How long should a septic baffle be?

The inlet baffle should extend at least 6 inches, but no more than 12 inches into the liquid level of the tank. The inlet baffle should extend 12 inches above the liquid level of the tank. This is a total baffle length of 18 to 24 inches.

Can septic tank baffles be replaced?

If septic tank baffles are lost or damaged (rusted off on a steel tank or broken off on a concrete tank), they can be repaired or replaced. Baffles in a septic tank are provided to keep solids and floating scum and grease inside the tank.

What is the average life of a septic system?

Age of the System It’s pretty common for a septic system to last 40 years or longer, which means if you buy a new home, you might never need to replace it. However, you might have an older home whose septic system has been in place for nearly half a century.

How often does a 1000 gallon septic tank need to be pumped?

For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.

Why do septic tanks have baffles?

A septic tank should have baffles at both the inlet and outlet. The purpose of the inlet baffle is twofold: to direct flow from the house sewer downward into the tank to create a longer detention time for the sewage to allow settling of solids, and to keep the floating scum layer from plugging the inlet pipe.

Where is the baffle located on a septic tank?

Septic baffles are located at the junctions where pipes enter and exit the tank. The one at the inlet pipe is called the inlet baffle, and the one at the outlet is called the outlet baffle.

Why does my septic baffle keep clogging?

When the inlet baffle is damaged or missing, this allows the scum layer to block the inlet pipe in your septic tank. Once the scum layer is low enough, pressure from the water inside your inlet pipe will push the solid clog through into the tank, allowing the plumbing in your home to drain freely.

Will a flooded septic tank fix itself?

Most septic tanks are not damaged by flooding since they are below ground and completely covered. However, septic tanks and pump chambers can fill with silt and debris, and must be professionally cleaned. If the soil absorption field is clogged with silt, a new system may have to be installed.

3 THINGS TO KNOW ABOUT SEPTIC TANK BAFFLES

By Admin on November 12, 2020 Your efforts to live as environmentally conscious as possible, as a responsible homeowner, are likely already underway, with practices such as recycling, composting, and purchasing energy-efficient equipment among your list of accomplishments. As a septic tank owner, you want to be sure that anything you put into your tank and septic field is causing the least amount of ground contamination as is reasonably practicable. Fortunately, there are a number of modest improvements you can do immediately to make your septic system even more ecologically friendly than it already is.

Have your septic tank inspected and pumped on a regular basis.

A bigger septic tank with only a couple of people living in your house, for example, will not require pumping as frequently as a smaller septic tank or as a septic tank that must manage the waste products of multiple family members will require.

When in doubt about how often to pump your septic tank, consult with a professional for advice.

  • In addition to locating and repairing any damage, a professional can ensure that the septic field is in good working order and that your septic tank is functional, large enough to handle your family’s waste, and not causing any unwanted pollution in nearby ground water.
  • Avoid flushing non-biodegradable items down the toilet or down the toilet.
  • Items that are not biodegradable are unable to properly decompose in the septic tank and might cause the system to get clogged.
  • In addition to causing issues in your house, septic system backups can damage ground water in the area surrounding your septic field.
  • Towels made of paper Products for feminine hygiene Grease or fats are used in cooking.
  • grinds from a cup of coffee Even if you have a trash disposal, the food scraps that you flush down the drain and bring into your septic system may cause unanticipated harm to your plumbing system.
  • Food scraps can enhance the amounts of nitrogen and phosphorus in the wastewater, which can disturb the natural bacterial balance of the septic tank, among other things.
  • Water conservation should be practiced.
  • Exceedingly large amounts of water use will interfere with the normal flow of wastewater from your home into your septic tank.
  • Limiting the amount of time you spend in the shower and turning off the faucet while brushing your teeth, as well as purchasing a smaller dishwasher and washing machine that use less water, are all simple strategies to reduce water use in your home.

The following are some basic steps you can take to make your septic system more ecologically friendly: save water, maintain your septic system and tank, and recycle wastewater. To get answers to any of your septic tank-related issues, get in touch with the experts at Upstate Septic Tank, LLC.

What is a Septic Tank Baffle & Why Do I Need One

Septic tank baffles are an essential component of your Sparta septic system, yet many homeowners are unaware of their importance. Find out what septic tank baffles are, where they’re positioned, and why you need them in your Sparta septic tank by continuing reading this article! Call Now For Sparta Septic System Assistance!

Septic Tank Inlet Baffle

The connection that connects your home to your septic tank is referred to as a “inlet” line. An “inlet baffle” has been put on the interior of the tank for this particular line. An intake baffle that has been correctly maintained sends incoming trash downward, below the liquid level, limiting disruption of the liquid and solid layers within the tank, as shown in the illustration. A correctly operating inlet baffle prevents solids and the floating top layer, commonly referred to as the FOG (fats, oils, and grease) and/or Scum layer, from overflowing into the outlet line and into the absorption component (either a “field” or a “seepage pit,” from entering the system.

Septic Tank Outlet Baffle

Each system has an absorption component that is connected to the septic tank through a “outlet” connection on the “inlet” side of the tank. It is recommended that this line be equipped with an exit baffle, which keeps the scum layer and any trapped materials from entering the disposal area or leach field. It is necessary to replace a disintegrating or missing outlet septic tank baffle in order to maintain the integrity of the disposal area and to keep your septic system operating at peak performance.

Septic Tank MaintenanceBaffles

During routine septic pumping or a residential septic system inspection, your Wilson Services’ technician will find the inlet and outlet locations of the tank and determine whether or not the baffles are currently in place and in good working order. Depending on whether or not we find one to be in poor condition or missing altogether, we may propose that you invest in a baffle replacement, which is an ideal method for you to extend the life of your septic system. A fully operating sewage system must not only empty into the tank but also remain in the tank until the next septic pumping is done, and the only way for this to happen is with properly functioning septic tank baffles.

Septic Tank Experts in Sussex CountyBeyond

During routine septic pumping or during a residential septic system inspection, your Wilson Services’ technician will find the inlet and outlet sections of the tank and determine whether or not the baffles are currently in place and in good working order. Depending on whether or not we find one to be in poor condition or missing altogether, we may propose that you invest in a baffle replacement, which is a cost-effective solution for you to extend the life of your septic tank. A fully operating sewage system must not only empty into the tank but also remain in the tank until the next septic pumping is done, and the only way for this to occur is with properly functioning septic tank baffles.

Pumpers Pay Special Attention to Inlet & Outlet Baffles Upon…

Receive articles, stories, and videos about trucks delivered directly to your email! Now is the time to sign up. Trucks+ Receive Notifications I’m not sure what the function of a septic tank baffle is. In response to a recent inspection report indicating that the baffles need to be fixed or replaced, this is a question that many homeowners have asked themselves. As a result, it is a reasonable query, given that your clients are aware that they would be required to spend money. Before responding to the question directly, it is necessary to provide a quick description of the interior of their tank.

See also:  How Much Is A Concrete Septic Tank? (Solved)

Upon evaluating the tank, if any of these three layers are missing, the service provider is on a quest to identify what is causing the problem.

One or both of the septic tank baffles have been removed or are somehow damaged.

The intake baffle has two purposes: it directs flow from the house sewer downward into the tank, allowing for a longer detention period for the sewage to allow for the settling of particles, and it prevents the floating scum layer from clogging the pipe leading into the tank.

These days, we may improve the first function by utilizing effluent filters to prevent big floating particles or debris from entering downstream into the water supply.

TWO TYPES OF BAFFLES

Baffles are generally classified into two categories: plastic sanitary tees and wall baffles. There are built-in baffles in the walls that often provide extra space for the particles transported by the home sewage to pass into the tank. Having said that, due to the nature of their design, sanitary tees are less prone to experience clogging issues. If the baffles are fitted correctly, any kind will function adequately. However, if the tank is not properly installed, baffles can quickly degrade and cease to function as they should.

  • Retrofitting a sanitary tee is typically used to repair wall-attached baffles when they get damaged or worn out over time.
  • These days, it’s scarcely necessary to say it because experts are well-versed on the distinction.
  • Many prefabricated septic tanks now have a sanitary tee that has already been fitted.
  • When connecting a wall baffle, be sure that the connection does not corrode.
  • Baffles manufactured of PVC sanitary tees must be correctly bonded and fastened to the inlet and outlet pipework in order to function effectively.
  • Often, when a wall baffle is replaced with a sanitary tee, the patching around the hole is inadequate, enabling roots or surface water to enter the tank.
  • If there is an effluent screen, it should be inspected to determine if it needs cleaning.

CHECK FREE FLOW

Examine the input pipe and the wall baffle during a routine inspection to ensure there is sufficient free space to enable free passage of water and sediments into the tank. There should be 2 to 4 inches of room between each item. Typically, this is caused by improper installation, where the pipe was forced past the inside wall of the tank, hence lowering the amount of room available for solids to flow through. Consequently, toilet paper can accumulate in the pipe, clogging it and causing backups into the home.

An additional consideration at the intake is the type of pipe that was utilized for the household sewer line.

This type of pipe can react with soap products, creating corrosion and clogging the pipe, as well as generating flow difficulties in the pipeline.

Similarly, the outlet baffle should be checked to ensure that it has enough room. This is less important since the outlet baffle should extend to a depth that is equal to 40 percent of the working depth of the tank, sucking clear liquid out of the tank, making it less vital.

A FINAL THOUGHT

It is necessary to inspect the pipe leading into and out of the tank to see whether it is straight in and out. If the pipe is “cocked” at an angle after installation as a result of settling, it will need to be repaired. This scenario can result in pipe obstructions and backups, as well as contribute to venting and corrosion issues in the water system.

What Is A Septic Tank Baffle?

By /0 Comments on September 15, 2016 at 6:06 a.m. If you live in a house with a septic tank, it’s critical that you understand how everything functions. It is possible to really increase the life of your septic tank if you provide it with the right maintenance and safeguards during its operation. This involves arranging routine septic pumping services, reducing water use in the home, and utilizing the proper chemicals in your drains and pipes. You may also assist your septic system by being aware of any red flags that may appear.

  1. A septic tank baffle is a component of the pipe that connects the tank’s intake and output.
  2. The baffle in a septic tank has the purpose of assisting in the movement of wastewater.
  3. This prevents the water from leaving the system too rapidly and producing difficulties later on.
  4. If there is any corrosion or degradation, they will want to know about it.
  5. The most effective technique to help extend the life of your septic tank is to reduce the amount of pressure you apply to the system.
  6. In the last section, we discussed the difference between an excavation pit and an open field.

About Author

Are you perplexed as to what a septic tank baffle is all about? Have you ever wondered what they do for a living? If your property has a septic tank, it’s worth understanding what’s going on with it. It’s not the most difficult puzzle in the world, but it’s still worth knowing. First and foremost, it is vital to understand how a septic tank functions. Everything that goes down the toilet, down the shower, down the kitchen sink and down the washing machine goes via a pipe and into the septic tank on your property.

  1. I warned you that the crust would be made up of less dense matter – fats, oils, and solids that have not yet broken down
  2. The top layer is made up of less dense matter – fats, oils, and solids that have not yet broken down, also known as the crust. The second layer consists primarily of unclean water with no solids left, and it is only this layer that should be allowed to travel through the tank and into the soakaway system
  3. However, The bottom layer is referred to as sludge (for which I really apologize) and is composed primarily of more thick trash that accumulates slowly over time. A septic tank emptying is required every few years, and this layer, along with the top layer, must be removed.

I previously said that just the second layer should be allowed to travel through the soakaway mechanism. The reason for this is that soakaway systems are often composed of slotted or perforated pipework, through which the separated waste water percolates into the subsoils surrounding the system’s location. A certain level of treatment is provided by this method, and the waste water can be discharged into the environment without producing any contamination. If the lumpier stuff makes its way out of the tank and into the soakaway system, it clogs everything up and inhibits the soakaway from performing as it is designed to perform.

  1. Consequently, in our effort to avoid septic tank troubles, our good buddy the baffle comes to the rescue again.
  2. As a result, the baffle operates almost like an upside-down sieve, trapping all of the particles and fats in the tank and allowing only water to escape into the soakaway system.
  3. The first diagram depicts what is referred to as a ‘welded baffle cone.’ When it’s made, it’s essentially jammed between the two half spheres of the septic tank, which is how it gets its name.
  4. As opposed to this, the waste water rises up through the little gaps you can see and out the outlet pipe.

In fact, if you’ve been courageous enough to peer into your septic tank, you could already be aware that you have this sort of septic tank baffle since the hooks are normally visible at the top of the tank while looking into it.

What Are Septic Tank Baffles?

I previously said that just the second layer should be allowed to flow through the soakaway system to prevent flooding. The reason for this is that soakaway systems are often composed of slotted or perforated pipework, through which the segregated waste water percolates into the subsoils around the system’s drainage system. This offers a little degree of treatment for the waste water, and it is able to travel through the earth without generating any contamination. If the lumpier stuff makes its way out of the tank and into the soakaway system, it clogs everything up and inhibits the soakaway from performing as it is designed to do so.

  1. Consequently, in our effort to avoid septic tank issues, our good buddy the baffle comes in handy.
  2. As a result, the baffle operates almost like an upside-down sieve, trapping all of the particles and fats in the tank while allowing only water to escape into the soakaway system.
  3. As you can see in the first diagram, it represents something known as a “welded baffle cone.” As soon as it is created, it is jammed between the two half spheres that make up the septic tank.
  4. As opposed to this, the waste water rises up through the little gaps you can see and exits via the outlet pipe.
  5. These are normally attached to the tank’s neck with metal hook-and-loop fastenings.

Septic System Knowledge 101: Inlet and Outlet Baffles

While your septic tank is a critical component of your septic system, your baffles are as crucial – in fact, missing baffles can result in significant damage to your system. Posted on So, what exactly is a baffle? In simple terms, it is a mechanism that controls the flow of wastewater into and out of your septic tank. Tees are generally built of clay, concrete, or PVC pipe, and they are often referred to as “tees” in the industry.

The inlet baffle

While your septic tank is a critical component of your septic system, your baffles are as crucial – in fact, missing baffles can cause significant harm to your system.

Posted on To begin with, what exactly is a baffle. In simple terms, it is a mechanism that controls the flow of wastewater in and out of your septic tank. Tees are often formed of clay, concrete, or PVC pipe, and they are referred to as such.

The outlet baffle

The outlet baffle is also essential, and it plays a critical role in the process. If you want your system to work correctly, it has to be present. By directing effluent from the tank to the drainfield, it avoids the scum layer from entering the outlet pipe directly and producing drainfield obstructions and system failure before it is necessary.

See also:  Septic Tank Full Of Water When It Rains? (Perfect answer)

Baffle installation is not guaranteed

A baffle for the outlet is also necessary, and it is quite crucial to have one installed. If you want your system to work correctly, it needs to be there. The outlet baffle guides the flow of effluent from the tank to the drainfield; it prevents the scum layer from escaping directly into the outlet pipe, resulting in drainfield obstructions and premature system failures.

Schedule a septic pumping now

We’ve been constructing and maintaining septic systems for more than 75 years, and it is our objective to provide honest and high-quality service to our customers. To book your septic pumping, please contact us online right away. Over the course of 80 years, Van Delden Wastewater Systems has proven itself to be the premier Wastewater System provider, supplying San Antonio, Boerne, and the surrounding Texas Hill Country with services you can rely on today and in the future. We can assist you with any of your wastewater system needs, and our specialists can also assist you with your septic installation and maintenance requirements: 210.698.2000 (San Antonio) or 830.249.4000 (Austin) (Boerne).

Expert Tips for Baffle Repair

Receive articles, stories, and videos about repair sent directly to your email! Now is the time to sign up. Repair+ Receive Notifications One perk of working on septic systems for more than 40 years is that the folks I’ve met and worked with are frequently willing to offer images or tales that they find interesting. In this particular instance, my colleague Kim Seipp emailed me a photo of a repair work she had completed in Colorado. Hopefully, everyone who reads this recognizes right away that this is not the appropriate method of repairing or replacing a baffle in a concrete tank.

  • These baffles must be the right length and have a space between their top and the bottom of the tank lid to allow for the exchange of gases and the ventilation of the tank.
  • Thus, sewage travels through the tank on an irregular course, providing the detention time necessary for bigger particles to be settled out before the effluent is transferred to the final treatment and dispersion section of the system.
  • A floating scum blockage is prevented by the intake baffle from clogging the inlet pipe.
  • It is necessary to maintain floating scum in the tank, which is composed of oil and soap residue, so that it can be removed when the tank is cleaned.
  • A deteriorating concrete baffle at the exit of a septic tank is seen in this photograph.
  • Due to the fact that the sanitary tee is connected to the tank’s output pipe by couplings, the person(s) who completed this project had the appropriate concept.
  • This baffle will not perform the critical job of providing a relatively clear liquid to the next component of the system since there is no effluent filter in place.
  • The concrete around the pipe may require repair, and a rubber gasket may need to be installed retroactively to guarantee that the tank stays watertight and root-free.
  • The outlet baffle should be extended to a depth of 25 percent of the operating depth in the tank to ensure proper operation.

As an example, if the tank is 60 inches deep, the baffle would need to be 15 inches longer. I’d be interested in hearing how others might go about mending a baffle in the future. Leave a comment below or send an email to [email protected] with your baffle repair suggestions.

There’s Nothing Baffling About Tank Inlet and Outlet Features

One of our colleagues showed us an image of a septic tank’s intake baffle and stated that the baffle design would result in blocking and sewage backups into the house. While this was beneficial to his pumping company, it also meant that he had to deal with dissatisfied homeowners, which was not a pleasant experience. Baffles are described as any device used in a septic tank for the purpose of retaining solid waste. Often, there are sanitary tees at the intake and effluent screens at the outflow of a water distribution system.

Even as we travel throughout the country, we continue to come across states or regions where septic tanks are not built with inlet baffles.

Inlet and outlet

One of our colleagues provided us an image of a septic tank’s entrance baffle and stated that the baffle design would result in blocking and sewage backups into the home. We agreed. While this was beneficial to his pumping company, it also meant that he had to deal with dissatisfied homeowners, which was not a pleasant experience for anybody. Bafflings are any device used in a septic tank that helps to hold solid waste. Most of the time, this consists of sanitary tees at the inflow and effluent filters at the outflow.

Even as we travel throughout the country, we continue to come across states or regions where septic tanks are not built with input baffles.

What Is a Septic Tank Baffle?

In the event that you’re having backups in your septic system, which are accompanied by sewage smells in the house, and you can’t appear to locate a blockage in the drain pipes, the problem may be with the septic tank itself. Each baffle on the tank’s intake pipe and outlet pipe prevents floating items from flowing directly across the tank and into the drainage field. The baffles are connected by a pipe that runs through the tank’s outlet pipe. It is possible for effluent to back up out of the tank and into the piping if the input baffle is worn or cracked.

Septic Tank Design

An aseptic tank is a huge water storage tank that is used to treat sewage. The majority of them store between 1,000 and 1,500 gallons and are composed of plastic or concrete. Sewage is introduced into the tank through an intake port and biodegrades within the tank’s interior.

Liquids flow through an outlet port and into a drain field, where they percolate into the soil and are naturally cleansed by it. Solids settle to the bottom of the tank, while liquids flow through an outlet port and into a drain field.

The Purpose of the Baffles

It is necessary to install baffles in order to prevent water from entering the tank through the inlet and outlet ports. The baffles can either be integrated into the tank and formed of the same material as the tank itself, or they can be tees attached to the inlet and outflow pipes. The goal of these devices is to stop the flow of water carrying solids. Similarly, the baffle at the input port alters the flow direction 90 degrees and drives water down into the tank, while the baffle at the exit port prevents the surface layer of water from flowing into the output pipe, which includes grease and decomposing sewage.

Symptoms of Ruptured Baffles

It is very uncommon for baffles on older septic tanks to develop holes or to simply wear out over time. In order to identify whether or not this has occurred, you must first open the tank and examine it, and a few operation signs can alert you to the fact that you must do so:

  • In the case that the inlet baffle fails, sewage may back up from the tank into the home, or surface scum may block the tank’s inlet baffle from allowing sewage to pass through. Drain field jams induced by the failure of the outlet baffle can also result in backups
  • However, this is less common. The smell of raw sewage indicates that unprocessed sewage is filling the drain field, which might be the consequence of a baffle failure
  • Sewage odours can occur in either the home or the drain field. Standing water or particularly vigorous flora in the drain field may indicate that oil and scum are entering the drain field as a result of a faulty baffle.

Inspecting the Baffles

If your tank is equipped with built-in baffles, it should be equipped with a manhole access over the inlet and exit ports; you may check the condition of the baffles by raising the covers and doing a visual inspection of the baffles. Instead of built-in baffles, many tanks use tees constructed of PVC tubing for the input and outflow lines. In the tank, one port of the tee is buried, while the other is exposed above ground and is capped. These pipes do not deteriorate with time, although they can become clogged.

If you notice any issues with your septic baffles, contact a professional for assistance.

Installation – Pumps, Filters, Baffles – A Wesco Septic Service

It is necessary to employ septic pumps in order to transport septic effluent from the pumping chamber to the drainfield. Septic pumps do not have to transport solids, but they are constructed to last a longer period of time and to withstand more demanding conditions than a normal sump pump, which is meant to drain ground water from a structure. We will evaluate your tank and provide and install the appropriate pump for it. The use of Effluent Filters can extend the life of your septic system by removing materials down to 1/16-inch in size.

  1. These filters can last for months or even years before they need to be replaced or cleaned.
  2. In addition, we provide a filter cleaning service in which we visit to your home twice a year to clean your filter.
  3. When the input baffle is closed, wastewater from the sewage line is forced down into the tank, rather than over its surface and onto the outlet pipe going to the absorption area, as would otherwise be the case.
  4. When liquid effluent (effluent) in the tank exists between those layers, the solids and sludge settle to the bottom of the tank, while scum (lightweight materials such as paper, fats, and greases) rises to the surface.

The effluent (liquid) in the tank existing between those layers overflows into the absorption area.

Dealing With A Collapsed Baffle

There are several components to an aseptic system in Sherman, TX, including a series of baffles. Baffling or panels installed in a septic tank are meant to steer or regulate the flow of waste water through it. They are placed at the points where the tank’s pipes enter and depart. When used together, the inlet baffle and the outlet baffle help to ensure that wastewater flows smoothly and that particulates do not escape the tank and enter the leach field. We can assist you if you believe that one or both of these baffles have collapsed.

See also:  How Often To Replace Septic Tank?

What Causes Baffles to Collapse?

Baffles are one of several components of an aseptic system in Sherman, Texas. Baffling or panels installed in a septic tank are used to guide or regulate the flow of waste. They are placed at the points where the tank’s pipes enter and leave. When used together, the inlet baffle and outlet baffle help to ensure that wastewater flows smoothly, and that particulates do not escape the tank and enter the leaching field. Dusty Underwood PlumbingSeptic is available to assist you if you feel that one or both of these baffles has collapsed.

Emptying the Tank to Check the Baffles

In order to identify whether or not there has been a collapse, the tank must be totally emptied first. This will allow both baffles to be studied in their entirety. If the damage is minor, it may be able to restore the normal operation of the baffles and tank with the assistance of septic services that are qualified to do so.

When Replacement Is the Better Option

In order to identify whether or not there has been a collapse, the tank must be totally emptied and both baffles thoroughly checked. However, if the damage is quite minor, it may be able to restore normal operation to the baffles and tank with assistance from qualified septic services.

Call Our Team Today

If you think you may have a collapsed baffle, call Dusty Underwood PlumbingSeptic right once to find out for certain. We’ll inspect your septic system and let you know whether septic repair is necessary or whether septic system replacement is the best solution for you. Make contact with us right now to take advantage of our first-rate septic services. In order to arrange an appointment, you may either phone our staff or fill out the online form.

Our Services

Our pump truck is waiting for you, fully stocked and ready to get to work for you right away. Having cutting-edge equipment that can get the job done when others are struggling is something we take great pleasure in.

RV Pumping

If you have a recreational vehicle and are unable to move it, we can provide pumping services for your vehicle. To prevent your waste tank from being sucked flat during the operation, a specific connection must be used. Our vehicles are well equipped and prepared for the job.

Inspection Camera Work

If you are concerned about a possible problem and would want to get a better look at it before investing a lot of time and money on it, you may want to consider employing our camera equipment to get a better look at it. Before you start digging, make sure you’re making the appropriate choice.

Baffle Replacement

Septic tanks are nothing more than enormous solids-collection containers.

Baffles are a component of a septic tank that helps to keep sediments contained. When baffles are missing, incorrectly fitted, or degraded after years of exposure to hydrogen sulfide gas, which is found in all septic tanks, it is recommended that they be removed and replaced.

Filter Installation

Having a filter put on the outflow of your sewer system is another method of keeping sediments contained in your septic tank. Filters like this are reusable and simple to clean. By keeping tiny solid particles from leaking into your pump chamber or drain field, you may extend the life of your septic system by many years or more.

Riser Installation

The use of rippers is mandatory on all new septic systems, and they may be retrofitted to older septic systems as well. Risers are devices that raise the lids of septic tanks to the surface of the ground. Inspections, maintenance, and pumping access will be much easier as a result of this. There aren’t many firms nowadays that will find and dig for free. The money you would have spent on excavating and finding will be used to pay for your riser installation over the course of time. Not to add the time saved if you have a backup tank and need to get to the tank quickly when you don’t have one.

Submersible Pump Replacement

Septic systems are growing more sophisticated than they have ever been before. In many septic systems, one or more submersible pumps are included as part of the overall system. The pumps in question are electromechanical devices. They require the services of a service specialist to properly connect them to the water supply and set the floats in accordance with the design specifications. The electrical work is next required to be completed by a licensed electrician in the labor business.

Drain Field Installation / Repair

If you want a septic system repair or a complete installation, we are capable of meeting your requirements from start to finish.

Inspections

No matter if you are looking for septic system maintenance or a complete installation, we can take care of everything.

  • Home sale
  • County health department approval required
  • Septic system certifications required

Contracts for operation and maintenance (OM) are now available to satisfy the needs of your systems, which are being implemented by the County Health Department.

  • Contracts for operation and maintenance (OM) are now available to suit the needs of your systems, which are being implemented by the County Health Division.

For all of your unsolved issues, symptoms, and problems related to your septic system, we can provide system troubleshooting and guidance. When you have a problem with your septic system, let our years of knowledge guide you to the most cost-effective solutions.

Preferred Customer Program

Superior is assisting you in lessening the impact of growing septic system maintenance expenses on your pocketbook. I am pleased to offer you this tool, which allows you to set money aside in a trust account for the sake of system maintenance. Call and ask for further information at 425-905-2485.

Tank Locating

We can locate almost any tank using the most up-to-date electronic devices. Simply flush a transmitter and follow it to the tank to complete the process.

Main Line Cleaning (jetting)

Using soap and disposing of grease from clothing and dishes add to the accumulation of sediment in the main line leading to the septic tank, which can cause it to back up and overflow. This buildup will cause drainage to become sluggish and eventually back up into the residence. Every six years, it is suggested that you have your line cleaned. Line cleaning equipment with a high volume and pressure scours the line like new and then draws the loosening material back to the tank using our high volume and pressure equipment.

There is no need to come inside your home. It is recommended that the line be cleaned every other time if your septic system is on a three-year inspection and pumping plan. Now, keep those drain lines flowing!

Trap Clear

There are a variety of solutions available to keep your lines clean these days, but Trap Clear is one that is particularly well-known in our field. It is not available for purchase over the counter, and it is only available for purchase via industry specialists.

Residential Baffle Repairs & Installation

The baffles in your septic system are one of the most significant components because they prevent sediments in your septic tank from escaping into the drain field. If sediments make their way into the drain field, they may cause the drain field to clog, which may result in the collapse of the entire system. Our highly skilled professionals evaluate your inlet and outlet baffles as part of our complimentary 10-point inspection to ensure that they are in perfect functioning order. River Valley Septic is the company to call if you reside in Bucks, Northampton, or Hunterdon County and have a baffle that needs to be fixed or replaced.

The presence of broken or missing baffles can result in significant difficulties, and they should be changed as soon as possible to maintain effective operation of your septic system and to prevent big issues from arising in the future.

Call today for a free estimate!

You have the problems and we have the fixes, call now!

Repair and baffle Replace niftyadmin2021-08-24T19:58:51+00:00 Make an appointment for a free on-site quote now! When it comes to septic systems, the septic baffle is the most crucial component. When the input baffle is closed, wastewater from the sewage line is forced to settle at the bottom of the tank rather than flowing over the surface and into the outlet pipe that leads to the absorption zone. A device installed on the outlet of a septic tank that deflects gas and bubbles away from the outlet while also reducing the amount of solid particles carried over from the septic tank via the outlet.

We provide essential maintenance to all customers!

We feel it is critical to support organizations and businesses who are striving to make a good difference in our industry and community at large. We take great satisfaction in growing as a company by utilizing the greatest products, from reliable vendors, and ethical business procedures in order to provide superior service to our customers. It would not be feasible to deliver the Honest and Ethical Service that we do without the support of our industry partners and the client relationships that we have built across Southern Idaho since 1948.

a link to the page’s load

Leave a Comment

Your email address will not be published. Required fields are marked *