What Does A Septic Tank Do? (Perfect answer)

The septic tank is a buried, water-tight container usually made of concrete, fiberglass, or polyethylene. Its job is to hold the wastewater long enough to allow solids to settle down to the bottom forming sludge, while the oil and grease floats to the top as scum.

Does your shower water go into septic tank?

From your house to the tank: Most, but not all, septic systems operate via gravity to the septic tank. Each time a toilet is flushed, water is turned on or you take a shower, the water and waste flows via gravity through the plumbing system in your house and ends up in the septic tank.

What happens when septic tank is full?

Septic tanks gradually fill with solid waste. The grey water is allowed to pass through the tank and out into the underground drain field lines in your yard. Once the tank is full of solid waste, you may experience sewage backups in the toilets or slow drains in tubs and sinks.

Is a septic tank good or bad?

No. Many homes with septic systems also have a private well. But, the septic system is entirely independent from the well. Its purpose is not to treat wastewater so it can become drinkable, but to safely disperse it in a way that prevents contamination.

What are the pros and cons of having a septic tank?

More cost efficient – Extensive sewer lines are very expensive to build and maintain. On the other hand, a septic tank is cheaper to install and doesn’t come with monthly maintenance costs. Durability – When properly maintained, a septic tank rarely needs to be replaced.

Are dead animals good for septic tanks?

This is false. Rotting meat just adds unnecessary and foreign bacteria to your septic tank. At best, this will do nothing. At worst, bones and fur from a dead animal will clog up your system.

How many loads of laundry a day are safe to do with a septic tank?

Spread Out Laundry Loads These use less water which puts less stress on your septic system. Regardless of the type of appliance you have, you should still spread out your loads. Instead of doing several loads in one day, consider doing 1 load per day or space out 2 loads if you must do more in a single day.

How do u know when your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

  1. Your Drains Are Taking Forever.
  2. Standing Water Over Your Septic Tank.
  3. Bad Smells Coming From Your Yard.
  4. You Hear Gurgling Water.
  5. You Have A Sewage Backup.
  6. How often should you empty your septic tank?

Do septic tanks smell?

A properly-maintained septic tank should be odor-free, so if you notice a bad smell inside your home or outside near the leach field, it’s a sign that there’s a problem. Septic odors are caused by gases in the system, including carbon dioxide, hydrogen sulfide, and methane.

What are signs of septic tank problems?

7 Warning Signs Your Septic System Is Failing

  • Gurgling Pipes. They would occur when you run water in the house (e.g. when using the sink or shower) or flush the toilet.
  • Bad Odours. It’s never a pleasant experience when this occurs.
  • Water At Ground Level.
  • Green Grass.
  • Slow Drainage.
  • Blocked Pipes.

What are the disadvantages of a septic tank?

Cons

  • Maintenance costs $300-$600 every few years (which can still be cheaper than municipal sewer).
  • It can cause groundwater contamination if the system leaks.
  • If not maintained, you can have a costly mess on your hands.
  • Septic tanks will eventually need to be replaced.

How long do septic tanks last?

A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.

Can you sell a house with a septic tank?

If you currently have a septic tank that discharges to surface water then the sale will trigger the requirement to replace or upgrade the system. Buyers should satisfy themselves that any system is in good working order and does not cause pollution.

Is septic tank better than sewer?

Although septic systems require a bit more maintenance and attention, they have a number of advantages over sewer lines. Since they don’t pump wastewater long distances to be processed at a water treatment facility, they use less energy overall and have a smaller environmental impact.

How much does it cost to pump a septic tank?

How much does it cost to pump out a septic tank? The average cost is $300, but can run up to $500, depending on your location. The tank should be pumped out every three to five years.

Is it hard to maintain a septic tank?

Septic system maintenance is not complicated, and it does not need to be expensive. Upkeep comes down to four key elements: Inspect and Pump Frequently. Use Water Efficiently.

How Does a Septic Tank Work?

Mr. Fix-It-Up-For-The-Family You may save a lot of money if you understand how a sewage treatment system works—and what can go wrong—so that you can handle your own septic system maintenance.

How does a septic tank work?

Pumping the tank on a regular basis eliminates sludge and scum, which helps to keep a septic system in good working order. It is possible for a well-designed and well built septic system to last for decades, or it might collapse in a matter of years. It is entirely up to you as long as you can answer the question of how do septic tanks function. Healthy septic systems are very inexpensive to maintain, but digging up and replacing a septic system that has completely collapsed may easily cost tens of thousands in labor and material costs.

It’s critical to understand how a septic tank works in order to maintain one.

Let’s take a look below ground and observe what happens in a properly operating septic system, shall we?

Understand that a septic system is a cafeteria for bacteria

Bacteria are responsible for the proper operation of a septic system. They decompose garbage, resulting in water that is clean enough to safely trickle down into the earth’s surface. The entire system is set up to keep bacteria healthy and busy at all times. Some of them reside in the tank, but the majority of them are found in the drain field. 1. The septic tank is the final destination for all waste. 2. The majority of the tank is filled with watery waste, referred to as “effluent.” Anaerobic bacteria begin to break down the organic matter in the effluent as soon as it enters the system.

  1. A layer of sludge settles to the bottom of the container.
  2. 4.
  3. Scum is mostly constituted of fats, greases, and oils, among other substances.
  4. Grease and oils float to the surface of the water.
  5. (5) A filter stops the majority of particles from reaching the exit pipe.
  6. The effluent is discharged into the drain field.
  7. Effluent is allowed to leak into the surrounding gravel because of holes in the drain septic field pipe.
  8. The garbage is completely decomposed by aerobic bacteria found in gravel and dirt.
  9. Potable water seeps into the groundwater and aquifer system from the surface.

Septic Tank Clean Out: Don’t abuse the system

Septic systems that have been correctly planned and constructed require just occasional ‘pumping’ to remove the sludge and scum that has built up inside the tank.

However, if you don’t understand how a septic tank works, you may unintentionally hurt or even destroy the system.

  • Drains are used to dispose of waste that decomposes slowly (or not at all). Cigarette butts, diapers, and coffee grounds are all known to cause issues. Garbage disposers, if utilized excessively, can introduce an excessive amount of solid waste into the system. Lint from synthetic fibers is emitted from washing machine lint traps. This substance is not degraded by bacteria in the tank and drain septic field. Bacteria are killed by chemicals found in the home, such as disinfecting cleansers and antibacterial soaps. The majority of systems are capable of withstanding limited usage of these goods, but the less you use them, the better. When a large amount of wastewater is produced in a short period of time, the tank is flushed away too quickly. When there is too much sludge, bacteria’s capacity to break down waste is reduced. Sludge can also overflow into the drain field if there is too much of it. Sludge or scum obstructs the flow of water via a pipe. It is possible for tree and shrub roots to obstruct and cause harm to a drain field. Compacted soil and gravel prevent wastewater from seeping into the ground and deprive germs of oxygen. Most of the time, this is caused by vehicles driving or parking on the drain field.

Get your tank pumped…

Your tank must be emptied on a regular basis by a professional. Pumping eliminates the accumulation of sludge and scum that has accumulated in the tank, which has caused the bacterial action to be slowed. If you have a large tank, it may be necessary to pump it once a year; but, depending on the size of your tank and the quantity of waste you send through the system, you may go two or three years between pumpings. Inquire with your inspector about an approximate guideline for how frequently your tank should be pumped.

…but don’t hire a pumper until you need it

Inspections and pumping should be performed on a regular basis. However, if you’re not afraid of getting your hands dirty, you may verify the sludge level yourself with a gadget known as The Sludge Judge. It ranges in price from $100 to $125 and is commonly accessible on the internet. Once you’ve verified that your tank is one-third full with sludge, you should contact a professional to come out and pump it out completely.

Install an effluent filter in your septic system

Garbage from your home accumulates into three distinct strata. The septic filter is responsible for preventing blockage of the drain field pipes.

Septic tank filter close-up

The septic tank filter is responsible for capturing suspended particles that may otherwise block the drain field pipes. Obtain an effluent filter for your tank from your contractor and place it on the outflow pipe of your tank. (It will most likely cost between $50 and $100, plus labor.) This device, which helps to prevent sediments from entering the drain field, will need to be cleaned out on a regular basis by a contractor to maintain its effectiveness.

Solution for a clogged septic system

If your septic system becomes clogged and you find yourself having to clean the filter on a regular basis, you might be tempted to simply remove the filter altogether. Hold on to it. Solids, wastewater, and scum are separated into three levels in septic tanks, which allows them to function properly (see illustration above). Solids sink to the bottom of the container, where microbes breakdown them. The scum, which is made up of trash that is lighter than water, rises to the surface. In the drainage field, the middle layer of effluent leaves the tank and goes through an underground network of perforated pipes to the drainage field.

  • Keep the effluent filter in place since it is required by your state’s health law.
  • Waste particles might flow through the filter and clog the perforated pipes if the filter is not used.
  • Your filter, on the other hand, should not require cleaning every six months.
  • A good chance is high that you’re flushing filter-clogging things down the toilet, such as grease, fat, or food scraps.
  • A garbage disposal will not be able to break down food particles sufficiently to allow them to flow through the septic tank filtration system.
  • Plastic items, disposable diapers, paper towels, nonbiodegradable goods, and tobacco products will clog the system if they are flushed through it.

For additional information on what should and should not be flushed down the toilet, contact your local health authority. More information on removing lint from your laundry may be found here.

Get an inspection

Following a comprehensive first check performed by an expert, regular inspections will cost less than $100 each inspection for the next year. Your professional will be able to inform you how often you should get your system inspected as well as how a septic tank functions. As straightforward as a septic system appears, determining its overall condition necessitates the services of a professional. There are a plethora of contractors who would gladly pump the sludge out of your tank, but many, in my experience, are unable to explain how a septic system works or how it should be maintained.

A certification scheme for septic contractors has been established in certain states; check with your state’s Secretary of State’s office to see whether yours is one of them.

Also, a qualified inspector will be able to tell you whether or not your tank is large enough to accommodate your household’s needs, as well as the maximum amount of water that can be passed through it in a single day.

As you learn more about how a septic tank works, your professional should be able to tell you whether or not your system will benefit from this treatment.

Alternatives to a new drain field

If an examination or a sewage backup indicate that your drain field is in need of replacement, the only option is to replace it completely. As a result, it’s important to talk with a contractor about other possibilities before proceeding with the project.

  • Pipes should be cleaned. A rotating pressure washer, used by a contractor, may be used to clean out the drain septic field pipes. The cost of “jetting” the pipes is generally around $200. Chemicals should be used to clean the system. A commercial solution (not a home-made one) that enhances the quantity of oxygen in the drain field should be discussed with your contractor before installing your new system. Septic-Scrub is a product that I suggest. A normal treatment will cost between $500 and $1,000. Make the soil more pliable. The practice of “terra-lifting,” which involves pumping high-pressure air into several spots surrounding the drain field, is authorized in some regions. Some contractors use it to shatter compacted dirt around the pipes. Depending on the circumstances, this might cost less than $1,000 or as much as $4,000 or more.

Protect your drain septic field from lint

When this device is in place, it inhibits lint from entering the system, especially synthetic fibers that bacteria are unable to digest. One of these filters, which I’ve designed and termed theSeptic Protector, was invented by me. An additional filter is included in the price of around $150 plus delivery. Learn more about how to filter out laundry lint in this article.

Don’t overload the septic system

Reduce the amount of water you use. The volume of water that flows into your tank, particularly over a short period of time, can be reduced to avoid untreated waste from being flushed into your drain field. Replace outdated toilets with low-flow ones, install low-flow showerheads, and, perhaps most importantly, wash laundry throughout the week rather than just on Saturday mornings to save water.

Meet the Expert

Septic systems, according to Jim vonMeier, are the solution to America’s water deficit because they supply cleaned water to depleted aquifers, according to vonMeier. He travels the country lobbying for septic systems, giving lectures, and giving testimony. For septic system inquiries, as well as information on the operation of the septic tank, contact him by email.

The 5 Biggest Questions Home Buyers Have About Septic Systems

Image courtesy of istockphoto.com The word “septic system” in a home ad is well-known for scaring away potential purchasers from the property. Some homebuyers may consider the system to be obsolete, expensive to fix, or difficult to keep up to date. Septic systems, on the other hand, do not have to be frightening. A septic tank and its accompanying parts may easily endure for decades if they have a good maintenance record and are properly inspected on a regular basis. Don’t instantly rule out an attractive property because it has this sort of system buried out back if you’re contemplating booking a viewing appointment.

Continue reading to learn more about septic systems, including how they function, common misunderstandings about them, how to maintain them, how to locate a septic system inspector, and indicators that a septic system is in danger of collapsing.

1. How do septic systems work?

Water that has been filtered by a septic system is called effluent. There are several components, including a big septic tank, distribution box, baffles, and a drainfield, all of which are buried below ground. Septic fields and leach fields are other names for the drainfield, which is a network of perforated pipes that extends out from the septic tank and allows filtered wastewater to be released back into the environment through the soil. The wastewater from your home, including that from toilets, sinks, showers, and appliances, is channeled out of the house and into the tank through the pipes.

See also:  How Often To Replace Septic Tank?

The accumulation of particles over time offers a luxury home for helpful anaerobic bacteria, which work to break down the materials and release the grease, oil, and fats that have accumulated on the surface (the scum).

The residual wastewater (also known as effluent) runs via outlet pipes into a disposal bed or drainfield, where it is slowly and securely filtered by the earth, allowing it to be recycled.

2. What are common misconceptions about septic systems?

A lot of people have misconceptions (and even falsehoods) regarding septic systems, and this may make it difficult to decide whether or not to purchase a property that has one. Take a moment to put some popular myths and misconceptions in their proper perspective.

  • A septic system is no longer used by most people. Actually, according to the Environmental Protection Agency (EPA), around 20% of homes are equipped with a septic system, or one in every five dwellings. Septic systems fail on a regular basis. According to the Environmental Protection Agency, a septic system may survive up to 40 years—and possibly even longer—with proper maintenance. Septic systems have a foul odor. It is unlikely that an improperly managed septic system will release any unpleasant smells. An odor emanating from drains or the septic system itself indicates that there is a problem. A septic system has the potential to pollute a well. Installed correctly and maintained on a regular basis, a system will not cause contamination of a well on the property. To guarantee proper separation of drinking water and wastewater, the Centers for Disease Control (CDC) recommends that the system be installed at least 50 feet away from a well. The septic system will be examined during a house inspection. A house inspection is often focused on the systems within the home, and as a result, it seldom includes more than a cursory examination of the septic system. Look for a professional that understands the workings of a septic system and how to do a comprehensive inspection in order to obtain a complete picture.

3. How do you maintain a septic system?

Septic systems require regular care and maintenance in order to function properly. The good news is that keeping a septic system in excellent working order is rather straightforward. Here’s how to keep it in proper functioning order.

  • Maintenance and care are required to keep septic systems operating at peak performance. Fortunately, keeping up with the maintenance of a septic system is rather straightforward. Following are some guidelines for maintaining its functionality.

Image courtesy of istockphoto.com

4. How do you find the best septic system inspector?

Once an offer on a home is made, the deal is nearly always subject on the outcome of a thorough inspection of the property, which includes an examination of the septic system. Important to remember is that what is stated on a seller’s disclosure form is not a substitute for a thorough inspection of the property being offered for sale. The average homeowner does not have the necessary knowledge or equipment to conduct a thorough inspection of the system. If there are concealed issues, it is possible that the homeowner will not be aware of them.

  • One of the most common types of house inspection is a general home inspection, which evaluates the structure of the home, systems within it (such as plumbing and electricity), roof condition, and maybe some of the external features.
  • As a result, always seek the services of a septic system specialist for an inspection.
  • Your neighbors and real estate agent may be able to provide you with a few decent leads.
  • To begin, contact each possible inspector and ask them about their approach to the task; for example, some may use cameras to evaluate the distribution box and drainfield, while others may dig to complete their inspection.
  • Once the inspection has begun, the expert will search for pumping and maintenance records, examine for signs of leakage or backup, measure the levels of sludge and scum, and determine the age of the tank, among other things.
  • Depending on whether or not the property includes extensions that were built after the septic tank was originally installed, an inspector may give recommendations to make the residence more sanitary.

For example, a two-bedroom home will require a tank of a different capacity than a three-bedroom home will. Image courtesy of istockphoto.com

5. What are the signs that a septic system needs to be replaced?

It is critical to notice the warning symptoms of impending failure before they manifest themselves. For the most part, failure of a septic system goes unnoticed at first. Keeping an eye out for warning indicators will help you arrange a replacement before something goes wrong.

  • Gurgling noises coming from outside sewers
  • Interior drains in bathtubs and sinks that are slow to drain
  • Odors emanate from the sewage treatment plant, drainfield or inside drains of the house. There are wet places visible over the drainfield. Water is backing up into the home from the sewer line. Toilets are flushing more slowly
  • This is a problem. A sudden and dramatic increase in the amount of lush and full vegetation over the drainfield might indicate a probable obstruction or break in the exit pipes outside.

Image courtesy of istockphoto.com

Final Thoughts

Septic systems, which are used in around 20% of homes in the United States, are designed to remove effluent from a residence. While septic systems may need a bit more maintenance than utilizing a public sewage system, they are not nearly as difficult to maintain as their reputation would have you believe. A well-maintained septic system may survive up to 40 years if it is inspected on a regular basis and kept on the lookout for indicators of potential problems. It is critical for homebuyers contemplating a property with a septic system to have the system inspected by a professional before making an offer.

FAQs About Septic Tanks and Septic Systems

When it comes to septic systems, there is a lot to understand. Even after reviewing the information provided above, you may still have concerns regarding how septic systems operate and how to properly manage them. Answers to some frequently asked questions concerning septic systems are provided here.

Q: How does a septic tank work?

When sewage is discharged into a septic tank, the solid stuff descends to the bottom, where it is colonized by helpful anaerobic bacteria, which work to break down the solids and liberate the lipids contained within them. The byproducts rise to the surface of the tank and are separated by a series of baffles.

Q: What are the three types of septic systems?

Traditional septic systems are classified into three types: chamber septic systems, drip distribution systems, and septic systems with chambers. In most cases, conventional systems are employed in residential buildings. Typically, a chamber system is used in high water table settings due to the fact that it is comprised of a succession of closed compartments. Drip systems are often less difficult to install, but they require more upkeep.

Q: How many years does a septic system last on average?

A traditional septic system, a chamber system, and a drip distribution system are three different types of septic systems. Homes are usually equipped with conventional systems. Typically, a chamber system is used in high water table locations due to the fact that it is made up of a succession of closed compartments. The installation of drip systems is typically less difficult; nevertheless, they require more upkeep.

Q: What is the alternative to a septic tank?

An aerobic treatment system, composting waste, and a drip system are all options for replacing a septic tank in a residential setting.

Q: What chemicals are bad for a septic tank?

The use of chemicals such as oil-based paint, paint thinners, lubricants, gasoline, weed killers, foaming cleansers, and chlorine-based cleaners can cause damage to your septic tank. They have the potential to pollute the surrounding environment as well as destroy the bacteria that are necessary for waste breakdown inside the septic tank, making it difficult or impossible for matter to degrade.

Septic systems are well-understood by professionals. Link up with reputable professionals in your region and obtain free, no-obligation quotations for your project.+

How Does A Septic Tank Work? Learn How Septic Systems Treat Wastewater

Many homeowners are terrified by the thought of having a septic tank because they believe it would be difficult to repair and expensive to maintain in the future. With regular maintenance, a well-constructed septic system may survive for up to forty years. Knowing the ins and outs of your septic system is essential to getting the most out of it. We’ll go over the fundamentals, such as how a septic tank works, what it is, and how to maintain it so that it lasts as long as possible.

What is a Septic Tank?

Septic systems are considered unusual and out of date by many people. As many as one in every five American houses, particularly in rural regions, is equipped with an aseptic tank. A septic tank is a large underground tank that is used to store and treat sewage. It enables homes to securely dispose of wastewater from bathrooms, showers, dishwashing, and other sources by transporting it outside of the home. Septic tanks, as well as the machinery that supports them, are placed underground. For safety reasons, they are usually put at least 10 feet away from the home when possible.

The most common materials used to construct a septic tank are concrete and plastic.

Septic tanks are available in a variety of sizes to accommodate different sized residences.

What is a Septic Tank Used For?

The water that runs from your residence is frequently polluted, making it dangerous to drink or handle in any way. Bathing, cleaning dishes, and doing laundry all contribute to the production of polluted water. Septic tanks treat wastewater that goes through the system by the use of natural and mechanical processes, respectively. It doesn’t matter where it emanates from within the house, either. In order to restore water to the earth, it must first be cleaned of undesired particles and organic materials.

Septic systems are used to treat wastewater when there are no public sewer systems accessible.

How Does a Septic Tank Work?

Septic tanks function by allowing wastewater to rest and settle, which is a natural process. In a septic system, solid particles and sediment settle to the bottom, where they may be separated from the water. Bacteria eat away at the sludge over time, transforming it into more manageable components for human use. This also causes scum to be released, such as fats, greases, and oil. Scum rises to the surface of the water and collects there. Following the filtration of the sediments, the filtered liquid wastewater, also known as “effluent,” is discharged via perforated pipes.

These outlet pipes transport the water to a place known as the drainfield or leach field, depending on the region.

Finally, the wastewater percolates into our soil, where it is able to free itself of any harmful substances. This contains diseases that are potentially hazardous, such as coliform bacteria. In human excrement, coliform bacteria that are harmful to the body can be discovered.

Septic Tank Design

Tanks are available in a variety of shapes and sizes. Depending on the number of bedrooms, soil condition, lot size, and other considerations, a household will choose one over the other. A septic system may be classified into several categories, according to the Environmental Protection Agency (EPA). The most prevalent of them are as follows:

  • The term “standard septic tank” refers to a single or double-chamber tank that is located underground. a conventional septic system is a complete underground water treatment system in which the septic tank discharges onto a soil or gravel drainfield
  • And Septic tank system that does not require excavation and instead makes use of linked subsurface chambers rather than an open drainfield. Drip Distribution System: A shallow septic system that uses drip tubing to disseminate sewage gently
  • These devices operate similarly to a tiny sewage treatment plant, using oxygen to stimulate naturally occurring bacterial activity for the purpose of treatment. When it is impossible to bury a drainfield, such as in places with shallow soil or high groundwater, a mound septic system is used to properly route wastewater flow through elevated trenches. Pump-Chamber-Sand Filter System: This system circulates effluent from the tank to the pump chamber, where it percolates through the sand filter. Depending on the use, it can be put above or below ground. In the absence of a filter, all waste particles will be able to pass through easily and clog your pipes
  • Method of Evapotranspiration: Rather than filtering wastewater through the soil, this system traps it in the drainfield using a watertight membrane, allowing it to evaporate. Constructed Wetland System: This environmentally friendly system mimics natural water treatment processes by directing wastewater to a wetland cell rather than a drainfield for screening and treatment. The use of a community septic system might occur when many home sites are near together and the septic tanks flow into a common drainfield.

Inside a Septic Tank

The most common configuration consists of a septic tank, a distribution box, a drain field, and a network of perforated pipes that connects the first and second tanks. There is a single main drainage pipe, also known as an input pipe, that connects the septic tank and the home. The water waste from your home passes through it and into the septic tank, where solid and liquid waste are separated from the liquid waste and disposed of separately. Nowadays, the majority of septic tanks are divided into two parts.

Both compartments are waterproof and are separated by a sturdy wall that prevents water from entering.

A T-shaped baffle, similar to the inlet and exit pipes, is used to prevent particles from entering.

The Septic System Treatment Process

When wastewater enters a treatment plant through an intake pipe, grease and oil float to the top of the water column, while solid waste and silt sink to the bottom. This is done in order to keep them out of the wastewater once it reaches the drainfield. Solids can clog the perforated pipes in the area, and oils can cause harm to the leached soil as they pass through. There is a healthy population of anaerobic bacteria in the soil underneath the septic tank, and these bacteria feed on and digest the organic waste.

  • Sludge and scum are prevented from exiting the septic tank and entering the drainfield by an outlet baffle at the other end of the system.
  • The drainfield is a shallow area of open ground near the home that filters untreated wastewater via rocks, mud, and sand in order to eliminate contaminants in a natural and environmentally friendly manner.
  • A good septic system is one that is hidden underneath and not visible.
  • These access points are normally protected by a plastic cap with a diameter of approximately 4″.

What Does a Septic Tank Look Like?

From the exterior, an underground septic tank is typically characterized by the appearance of a huge metal or plastic box. These septic systems may typically be distinguished by the characteristic inspection pipes located on top of the box, which are often covered with green covers. The majority of tanks are equipped with one or two inspection pipes as well as bigger manhole covers for pumping. A vent pipe is used to expel the gases that have accumulated. Above-ground septic tanks have a distinctive appearance that distinguishes them from their underground counterparts.

Aside from that, they are often constructed of fiberglass, polymers, or some other weather-resistant material.

A network of tiny, perforated pipes connected to the outflow and reaching into the drainfield’s soil is also present.

The size of this region is determined by the amount of water that your septic tank must handle. This will be determined by your daily water use as well as the number of bedrooms in your home.

What Does a Septic Tank Do?

Designed to remove sediments and pollutants from water, septic tanks are often used in residential and commercial settings. Understanding what a septic tank accomplishes will help you better understand how to care for your septic system in the future. The majority of conventional septic tank systems consist of a septic tank, which is often a large, hidden rectangular or cylindrical vessel composed of cement, fiberglass, or polyethylene material. It is not uncommon for septic systems built before 1975 to have a single compartment and for those built after 1975 to have many compartments, according to industry standards.

See also:  How Often Should You Clean Septic Tank? (Solution)

Sewage from all plumbing connections is directed toward the septic tank, where heavy masses fall to the lowest point and bacterial activity produces digested slime and fumes as a result of the digestion process.

Septic Tank Clean Out: Don’t Abuse the System

It is necessary to clean your septic system on a regular basis in order to keep it in good working order. If you don’t, your drains may become blocked, you may notice smells, and your drain field may become backed up with water. Septic tank pumping should only be required every two to three years in a well functioning system. When you have your tank pumped, it eliminates sediments, which enhances the flow and efficiency of the wastewater treatment process overall. If you don’t know what you’re doing when performing system maintenance, it’s possible to cause damage to the system.

This will assist you in ensuring that your septic tank is working at peak performance and will prevent toxins from accumulating in the system over time.

Don’t Use Additives

Inadvertently adding chemical and biological additives is one of the most typical maintenance blunders. There are several flushable pills on the market that claim to improve the performance of your septic system by speeding up the breakdown processing and adding extra bacteria. With the help of these substances, you will be able to cope with septic system failure. These have the potential to disrupt the delicate natural equilibrium in your tank.

Don’t Flush the System

When septic systems are flushed out too quickly, it can have an adverse effect on the bacteria that live there. It can also cause scum and sediments to be disturbed, increasing the likelihood that they will clog up system components.

Take Care of the Drainfield

During normal septic tank maintenance, it’s not only the tank that has to be taken into consideration; the drainfield is just as vital. It is not recommended that you construct a structure or plant anything with deep roots in the region. Avoid driving on the drainfield as much as possible since this might compress the soil and cause the effluent flow to become obstructed.

Don’t Overload the Septic System

When using a septic system, there are several things that should not be flushed down the drain.

Organic waste and septic-safe tissue are the two types of waste that septic tanks can manage. The following are examples of things that might overflow your septic system:

  • Toilet paper
  • Diapers and sanitary goods
  • Disposable wipes
  • Paint and chemicals
  • Cat litter
  • Coffee grinds
  • Fabric and apparel.

Baby diapers and sanitary supplies; Disposable wipes; Paint and chemicals; Cat litter and coffee grinds; Fabrics and garments; Bulky things

Hire the Best Plumbing Service and Get Your Waste Water TreatmentSystemInspection Done Today!

Septic tank inspections should be performed every two to three years, at the absolute least. This will be done by a professional during normal pumping. If, on the other hand, you detect indicators that your septic system is malfunctioning, you should schedule an inspection as soon as possible. A faulty system might result in untreated garbage being transported to locations where it does not belong. While it’s vital to understand how a septic tank works, homeowners should always seek expert assistance if they have any problems with their system.

A basic home inspection will often only give the septic tank a cursory scan, so it’s advisable to contact a professional to examine the system thoroughly before making a decision on whether or not to purchase a home.

  • Septic tank inspection, Septic tank maintenance, Septic tank installation, Septic tank repair, and Septic tank pumping are all services that are available.

From our offices to your home, we always put you front and foremost in all we do. Call now to schedule a free septic check with one of our septic contractors.

Septic System Basics

When a household isn’t connected to a public sewage system, it normally relies on septic systems to treat and dispose of wastewater. Sewage treatment systems require a substantial financial commitment. The correct maintenance and upkeep of a well-designed, installed, and maintained system will provide years of dependable and low-cost service. The failure of a system can become a source of pollution and public health concern, resulting in property damage, ground and surfacewater pollution (such as contamination of well water used by you and your neighbors), and the spread of disease.

Aside from that, if you are planning to sell your property, your septic system has to be in good functioning order.

Septic systems are available in a variety of configurations to accommodate a wide range of soil and site conditions.

A conventional septic tank system is composed of three major components:

  • This is known as the Septic Tank. In order to remove particles from wastewater, store and partially decompose as much solid material as possible, while allowing the liquid (or effluent) to flow to the drainfield, a septic tank must be installed. more
  • The Drainage System After the particles have settled in the septic tank, the liquid wastewater (also known as effluent) is released to the drainfield, which is also known as an absorption or leach field, or both. more
  • The Soil is a very important factor. The soil under the drainfield is responsible for the ultimate treatment and disposal of the septic tank effluent once it has been treated. Following the passage of wastewater into the soil, organisms in the soil remediate the effluent before it percolates downward and outward, eventually entering ground or surface water sources. A drainfield’s efficacy is also affected by the kind of soil
  • For example, clay soils may be too tight to allow much wastewater to run through, while gravelly soil may be too coarse to give much treatment.
  • Septic System Inspection Done at Home In order to aid you in examining your system, a VideoField Guide and Checklist may be available at the bottom of the homepage.

Homeowners and residents have a significant impact on the functioning of their septic systems. Overloading the system with more water than it is capable of handling might result in system failure.

A septic system can also be damaged by the improper disposal of chemicals or excess organic waste, such as that produced by a trash disposal. The following maintenance suggestions might assist you in ensuring that your system provides long-term, effective treatment of domestic waste.

Inspect and Pump Frequently

The most critical step in keeping your septic tank in good working order is to eliminate sludge and scum build-up before it may flow into the drainfield. The frequency with which your tank has to be pumped is determined by the size of the tank, the number of people in your family, the quantity of water utilized, and the amount of solids (from humans, garbage disposal, and any other waste) that enter the tank’s drainage system. Tanks should be pumped out on average every 3 to 5 years, depending on usage.

  • Septic Inspection and Pumping Guide
  • Inspecting Your Septic Tank
  • Septic Inspection and Pumping Guide

Use Water Efficiently

System failure is frequently caused by an excessive amount of water. The soil beneath the septic system must be able to absorb all of the water that is used in the residence. Too much water from the washing machine, dishwasher, toilets, bathtubs, and showers may not provide enough time for sludge and scum to separate properly in the drain. The less water that is consumed, the less water that enters the septic system, reducing the likelihood of system failure. For further information on water conservation, visit:

  • Indoor Water Conservation
  • Every gallon of water conserved equates to a savings of $1.00.

Minimize Solid Waste Disposal

What you flush down the toilet can have a significant influence on the performance of your septic system. Many things do not breakdown properly, and as a result, they accumulate in your septic tank. If you have the option of disposing of it in another manner, do so rather than introducing it into your system.

Keep Chemicals Out of Your System

Protect your septic system against home chemicals such as caustic drain openers, paint and pesticides. Also avoid flushing down the toilet with chemicals such as brake fluid, gasoline, and motor oil. The improper dumping of dangerous substances down the drain is damaging to the environment, as well as the bacteria that are necessary for the breakdown of wastes in a septic system, and should be avoided.

Septic System Additives

Make sure that home chemicals such as caustic drain openers, paint, insecticides, photography chemicals, brake fluid, gasoline, and motor oil do not get into your septic system. Toxic chemicals disposed of improperly down the drain end up harming the ecosystem, as well as the bacteria that are necessary for the breakdown of waste in the septic system.

  • Odors, surface sewage, moist areas, or a dense growth of plants in the drainfield region are all possible problems. Backups from the plumbing or septic tank (which are often a dark liquid with a foul odor)
  • Fixtures that take a long time to drain
  • The plumbing system is making gurgling sounds. Your drainfield may be failing if you have a well and tests reveal the presence of coliform (bacteria) or nitrates in the water from it. Even in the midst of a drought, the drainfield is covered with lush green grass.

Septic System Guide: How It Works and How to Maintain It

As soon as you flush the toilet in most metropolitan locations, the waste is pumped out to the nearest sewage treatment facility. Garbage is processed at this factory, which separates it into two types of waste: water that is clean enough to be dumped into a river and solids known as residual waste. The remaining material is either disposed of in landfill or utilized as fertilizer. Septic systems, which are used in places where there aren’t any sewage treatment plants, provide a similar function, but on a much smaller scale.

What are Septic Tanks and How Do They Work?

Septic tanks are normally composed of concrete or heavyweight plastic and have a capacity of 1000 to 2000 gallons, depending on the manufacturer. In the tank, there are two chambers that are divided by a portion of a wall. The waste from the residence is channeled into the bigger room. Solids sink to the bottom of the chamber, and liquids make their way through a partial wall into the smaller second chamber, which is located above it.

Anaerobic bacteria, which are found naturally in the environment, digest the solids and convert them into water, carbon dioxide, and a tiny amount of indigestible debris.

Septic Fields Distribute Liquid Effluent

The second chamber has an output pipe via which the liquid (known as effluent) from the tank is discharged to a disposal or leach field, depending on the situation. It is drained into the earth by a network of perforated pipes or through perforated plastic structures known as galleries, which are constructed of perforated plastic. It is common practice to lay the pipe or galleries in a bed of gravel, which aids in dispersing the liquid. During the course of the effluent’s percolation through the soil, the soil absorbs remaining bacteria and particles, resulting in water that is safe to drink by the time the water reaches the aquifer deeper down.

  • They are not much deeper than that since a large quantity of water escapes through evaporation or is transpired by grass growing above ground.
  • If you have sandy soils that drain too rapidly, you may not be able to treat the wastewater properly.
  • Sometimes the water cannot be disposed of properly because the natural soils include a high concentration of silt or clay.
  • Topsoil and grass are applied to the mound, which allows more water to leave through transpiration and evaporation than would otherwise be possible.

Septic Systems Rely on Gravity, Most of the Time

The majority of septic systems rely on gravity to transfer the liquid from the home to the tank and then to the field where it will be disposed of. However, due to the slope of the land, the tank or the field may need to be higher than the house in some instances. It is necessary to have a pump, or occasionally two pumps, in order for this to operate. A grinder pump, which liquefies sediments and is installed in a pit in the basement or crawlspace of the home, will be used if the tank is higher than the house.

Sewage pumps are essentially large sump pumps that are used for heavy-duty applications.

How to Treat Your Septic System

It is not necessary to do much to keep your septic system in good working order, other than cut the grass above it and keep the drainage area free of trees and plants with roots that may block it.

How Often Do You Need to Pump A Septic Tank?

You should have a septic provider pump out the particles from your tank every two years, at the absolute least. A manhole at the surface of the tank will provide the pump operator access, but older systems may necessitate digging a hole in the tank’s top so the pumping hatch can be exposed. Unless the tank is continuously pumped, sediments will build up in it and ultimately make their way into the leach field, clogging it. You’ll know it’s occurring because untreated effluent will rise to the surface of the tank and back up into the home, causing it to overflow.

It may be necessary to replace the entire field as a result of this. Pumping the tank on a regular basis can ensure that the leach fields continue to work eternally.

What to Do if Your Septic System Fails

Pumps in a pumped septic system will ultimately fail, just as they will in any mechanical system. Most pumps are equipped with an alarm that sounds when the effluent level in the pit is greater than it should be, indicating that the pump has failed and has to be replaced. This is a job that should be left to the professionals. Visit the following website to locate a trusted list of installation and septic system service companies in your area:

  • The National Onsite Wastewater Recycling Association’s Septic Locator
  • The National Association of Wastewater Technicians
  • And the National Association of Onsite Wastewater Recycling Association

It is rare for a homeowner to have to worry about their septic system because it is well-maintained and doesn’t cause problems. Simple maintenance, such as keeping the tank pumped and the lawn trimmed, should result in decades of trouble-free service. What kind of protection do you have in place for your home’s systems and appliances against unforeseen maintenance needs? If this is the case, you might consider purchasing a house warranty.

  • Home Warranty Coverage for Roof Leaks
  • Septic Warranty Coverage and Costs
  • And more. Plans for protecting your mobile home’s warranty
  • What Is Home Repair Insurance and How Does It Work? How to Find the Most Reasonably Priced Home Appliance Insurance

What Is A Septic Tank & How Does It Work?

Many individuals are unfamiliar with the notion of septic tanks. However, for those households that do make use of one, they are extremely important. If you’ve always lived in a property that has been linked to the city’s main sewage system, it’s likely that you haven’t ever heard of a septic tank, let alone understood what it is. What a septic tank is and how it functions will be discussed in detail in this blog.

What Is A Septic Tank?

Essentially, a septic tank is an underwater sedimentation tank that is used to cleanse waste water through the processes of biological breakdown and drainage. A septic tank is a wastewater treatment system that uses natural processes and time-tested technology to treat wastewater from residential plumbing, such as that produced by bathrooms, kitchen drains, and laundry. The design of a septic tank system is pretty straightforward. It is a waterproof container (usually rectangular or spherical) that is buried underground and made of fiber glass, plastic, or concrete.

  • septic tank systems are classified as “simple on-site sewage facilities” (OSSFs) since they only provide rudimentary sewage treatment.
  • Excreta and wastewater are collected in a large underground tank, and they are mostly utilized in rural regions to keep the environment clean.
  • It is common for them to be comprised of two chambers or compartments, as well as a tank that collects wastewater via an entrance pipe.
  • This will be maintained and managed by a local water business.
  • There are, however, certain additional measures that must be observed.
  • Homeowners who have a septic tank have an added responsibility to ensure that their tank does not have an adverse influence on the surrounding environment.

In some cases, if a drain field becomes overwhelmed with too much liquid, it might flood, which can result in sewage flowing to the ground surface or creating backups in toilets and sinks.

How Does A Septic Tank Work?

It is the job of a septic tank to break down organic waste and separate it from floatable substances (such as oils and fats) and solids in wastewater. Two pipelines will be installed to connect a septic tank (for inlet and outlet). Septic tanks are equipped with intake pipes, which are used to convey water waste from homes and collect it in the tank. It is stored here for a sufficient amount of time to allow the solid and liquid waste to be separated from one another. The second pipe is the pipe that goes out.

  1. This pipe transports pre-processed effluent from the septic tank and disperses it evenly over the land and watercourses of the area.
  2. (as seen in the illustration above) The top layer is comprised of oils and grease, and it floats above the rest of the waste.
  3. Wastewater and waste particles are found in the intermediate layer of the wastewater system.
  4. Bacteria in the tank try their best to break down the solid waste, which then allows liquids to separate and drain away more readily from the tank.
  5. This is one of the reasons why a septic tank is considered to be a rudimentary type of sewage disposal.
See also:  How Deep Should A Septic Tank Be Buried? (Solution)

The Step-by-step Process of How a Septic Tank Works

  1. Water from your kitchen, bathroom, and other areas drains into a single main drainage pipe that leads to your septic tank. The septic tank, which is located underground, begins the process of storing waste water. It must maintain this condition for an extended period of time so that particles settle to the bottom and oil and grease float to the top. Following the completion of this operation, the liquid wastewater (effluent) will be allowed to escape the tank and enter the drainfield. This effluent is dumped into the environment through pipelines onto porous materials. The soil is able to filter wastewater through the use of these. In the process of percolating through the soil, wastewater is accepted, treated, and dispersed by the soil
  2. The wastewater eventually discharges into groundwater. Last but not least, the wastewater percolates into the soil, where it is naturally removed from the environment by coliform bacteria, viruses and nutrients.

Christian Heritage

Christian joined the company towards the conclusion of its first year of operation and has since become involved in all parts of the operation.

How Does a Septic System Work? 11 Things (2021) You Need to Know

Are you considering purchasing land that has a septic system? If this is the case, you may feel a little overwhelmed. If you’ve never had one before, it’s understandable that you would be curious about what it includes. Because they operate in a completely different manner from a regular sewer system, you are responsible for maintaining your septic system as a property owner. It entails a completely new degree of accountability and duty. But don’t be concerned! We can assist you in understanding not just what a septic system is, but also how it operates and anything else you need to know about owning one of these systems.

1.What is a septic system?

“Underground wastewater treatment structure,” as defined by the Environmental Protection Agency (EPA), is “often employed in rural regions where there is no access to municipal or county sewers.” These systems combine natural elements with time-tested technology to cleanse wastewater from residential plumbing, such as that produced by bathrooms, kitchen drains, and clothes washing machines.

2.What are the different parts of a septic system?

A basic septic system will be comprised of two components: a septic tank and a drain field (or drain field) (also called a soil absorption field). Septic tank: A septic tank is an underground, waterproof container composed of concrete, fiberglass, or polyethylene that is designed to hold wastewater. It should be able to retain the wastewater for an extended period of time, allowing all solids to settle out. In addition, there will be compartments and a t-shaped outlet in the septic tank to prevent sludge from exiting the tank and moving into the drain field region of the property.

At this time, just a portion of the effluent has been processed. Please keep in mind that if your drain field becomes overly overloaded with liquid, it will cause backups into the plumbing fixtures and prevent effective treatment from taking place.

3. How does a septic system work?

A basic septic system will be comprised of two components: a septic tank and a drain field (or drainage field) (also called a soil absorption field). Concrete, fiberglass, or plastic septic tanks are used to hold wastewater. Septic tanks are subterranean containers that are waterproof. In order for all particles to settle out, the wastewater must be held in the tank for an extended period of time. In addition, compartments and a t-shaped outlet will be installed in the septic tank to prevent sludge from exiting the tank and moving into the drain field.

At this stage, just a portion of the effluent has been cleaned.

4. What’s the play-by-play of how a conventional septic system works?

When it comes down to it, here’s everything you need to know about how a septic system operates. Water will flow out of your home through a single main drainage pipe and into a septic tank, if you have one. The septic tank will be a watertight container that will be buried in the ground. It’s commonly built of concrete, fiberglass, or polyethylene, depending on the use. The septic tank’s duty is to store wastewater for a long enough period of time to allow particles to sink to the bottom of the tank.

  1. During this time period, anaerobic bacteria will begin to decompose the waste.
  2. Upon exiting the tank, the liquid waste (effluent) will be discharged into the drain field.
  3. Porous surfaces are used to release pretreated wastewater because they allow the wastewater to pass through the soil and into the groundwater.
  4. It is possible for a drain field to get overwhelmed with liquid, causing it to flood and cause sewage to run to the ground surface, as well as backups in toilets and sinks.
  5. Wastewater infiltrates into the soil, where it is naturally removed from the environment by coliform bacteria, viruses, and other nutrients.
  6. It’s a sign that there has been human fecal contamination.

5. How do you know if a property has a septic system?

If you’re looking at houses to buy as an investment, it’s possible that some of them have septic systems. Listed below is how to determine whether or not septic systems are present. Water from a well is used on the site. Because there is no meter on the water line that enters the house, it is not possible to use it. The “$0.00 Sewer Amount Charged” line appears on the water bill or property tax statement. Septic systems are also installed on the properties adjacent to yours. Once you’ve verified whether or not this is the case, you may locate the septic system by following the methods outlined below: Taking a look at the “as-built” drawing of your house Checking your yard for lids and manhole covers may save you a lot of time.

Getting in touch with a septic system service provider for assistance in locating it

6.How do you know if your septic system is malfunctioning?

There are a few telltale indicators that your septic system isn’t working properly. If the septic system on your property is not functioning properly, you may notice the following symptoms. Wastewater is backing up into the drains of homes and businesses. On the drain field, there is a lush carpet of brilliant green, spongy grass, which is especially noticeable during dry weather. It is possible that you have pooled water or muddy dirt surrounding your septic system or in your basement. In the vicinity of the septic tank and drain field, there is a strong odor.

7. Do you need to pump your septic tank?

The majority of the time, if your septic system was correctly planned and maintained, it will just require infrequent pumping to remove the sludge and scum that has collected in the tank. Pumping is often suggested once a year, while it is possible to go as long as two to three years between pumping sessions. It will eventually be determined by the size of the tank and the amount of trash that is processed through the tank, among other factors. We recommend that you consult with an inspector to determine a general estimate of how frequently your tank should be pumped.

8. What can you do unknowingly that will destroy your septic system?

The following are all of the acts that might cause your septic tank to fail. Keep an eye out for them and stay away from them so that you just have to do normal maintenance on your septic tank! Avoid dumping cigarette butts, diapers, and coffee grounds down the toilet or down the toilet paper tube. Avoid using garbage disposals excessively since they might introduce an excessive amount of solid waste into the system. Keep an eye out for lint from synthetic fiber flows from washing machines, since bacteria in the tank and drain field will not be able to break down the material.

Keep an eye on the amount of sludge that is present in the tank.

Pump your septic tank on a regular basis to ensure that it is free of sludge and that it is functioning properly.

Automobiles driving or parking on the drain field may unintentionally cause this to occur.

9.Do you need a professional to help with septic system pumping?

Is it feasible for you to pump your septic system on your own, or do you require the services of a qualified professional? You’ll need the assistance of a licensed expert to perform the actual pumping of your septic tank. That being said, if you’re not afraid of getting your hands dirty, you can determine whether your septic system is ready to be pumped on your own. You can accomplish it in the following ways: If you want to do it yourself, you may purchase an equipment called The Sludge Judge online.

Upon determining that you have a third of your tank filled with sludge, you’ll need to contact a contractor to come out and pump it out for you.

Costs are normally between $50 and $100 per hour (plus labor).

It’s important to remember that frequent inspections and pumping are essential, therefore whether you or a professional does this operation, it must be completed!

10.What are the do’s and don’ts of having a septic tank?

Here’s a simple checklist to help you make sure your septic tank is being properly cared for. If you plan to install a waste disposal device, make sure to check with your local regulatory agency or inspector first. This will guarantee that your septic system is capable of dealing with the extra waste. Before adding any additives, be sure to verify with your local health authority. In addition to being damaging to the system, additives do not completely remove the necessity for frequent pumping.

  1. HIGH-EFFICIENCY LIGHTING SHOULD BE USED.
  2. It is recommended that only grass be planted on the ground around and near your septic system, since roots from neighboring trees or bushes may block and harm the drain field.
  3. DO use commercial bathroom cleansers and laundry detergents sparingly and only when absolutely necessary.
  4. DO take note of the location of your septic system and make a sketch of it for future reference during service visits and maintenance.
  5. If you want to keep your septic system running well, avoid the following items:
  1. Latex paint
  2. Pesticides
  3. And other potentially dangerous substances include dental floss, feminine hygiene items, diapers, cotton swabs, cigarette butts and grinds, cat litter, paper towels, and latex paint. Please keep in mind that toilet paper is OK.

If you have a clogged drain, avoid using caustic drain openers. To unclog obstructions, try boiling water or using a drain snake. Don’t allow cars to pass through or park on any section of your septic system. This can cause the soil to become compacted, as well as damage to the pipes, tank, and other components of the drainage system.

11. Why should you maintain your septic system?

When septic systems are correctly planned, installed, and maintained, they can successfully decrease and eliminate the majority of the risks to human health and the environment presented by contaminants in home water. Regular maintenance, on the other hand, is required in order for your septic system to continue to perform correctly after installation. Consider the following two reasons why it is vital that you spend in routine maintenance. It helps you save money. In the long term, keeping your septic system in good working order will save you money.

  • Inform yourself on how often you will need to pump your septic tank by consulting with a local professional.
  • Therefore, it is sometimes preferable to get a personalized opinion.
  • In the event that your septic system fails, you should hire a reliable specialist to do the necessary repairs.
  • It is beneficial to both human health and the environment.
  • This translates to more than 4 billion gallons of wastewater being distributed beneath the surface of the ground each day.
  • In order to avoid this, proper sewage treatment is required.

Nitrogen, phosphorus, and disease-causing bacteria and viruses are the most common contaminants found in home wastewater, but there are more. When your septic system is operating properly, it will be able to remove the majority of contaminants.

Final thoughts

Septic systems are commonly found in rural locations because they provide a cost-effective alternative for waste treatment in isolated places. If you’re looking at homes that have septic systems, following the recommendations above can help you to keep your tank in good condition and guarantee that your water supplies are safe. Some of the simple ideas include examining and pumping your tank on a regular basis, keeping your effluent filter in good working order, and conserving water whenever possible.

Additional Resources

If you are seeking for inexpensive land to purchase, you may find it on our Listings page. Before you acquire property, be sure to review the Gokce Land Due Diligence Program to ensure that it meets your needs. If you are wanting to sell land, please see our article on How to Sell Your Land for more information.

Would you like to receive an email with our latest blog/properties every Thursday?

Now is the time to subscribe. I hope you have found this content to be interesting. If you are interested in purchasing or selling land, you should look into the following: Disclaimer: We are not attorneys, accountants, or financial advisors, and the information contained in this article is provided solely for informative reasons. Our own research and experience have informed this post, and while we strive to keep it accurate and up to date, it is possible that some inaccuracies have occurred.

Erika is a former Director of Affordable Housing for the City of New York who has transitioned into a full-time land investor.

She graduated with honors from the University of Southern California with a Bachelor of Architecture and with a Master of Urban Policy from Columbia University before establishing Gokce Capital.

Erika presently resides in the New York Metropolitan area with her husband, daughter, and cat.

She is originally from Chicago and still considers herself to be a midwesterner at heart, despite her current location.

), Erika has a lot of interests.

Erika’s most recent blog entries (see all)

Leave a Comment

Your email address will not be published. Required fields are marked *