How To Find An Old Septic Tank? (TOP 5 Tips)

Follow the Main Sewer Line Look for a pipe that’s roughly four inches in diameter that leads away from your house. Remember the location of the sewer pipe and where the pipe leaves your home so you can find it outside. The sewer pipes will lead to where your septic tank is located.

How to find out if my house has a septic tank?

  • Inspect your property carefully. Some septic tanks,especially if you live in a mobile home,are easy to spot because they are accompanied by a large,rectangular or
  • Consider the location of your home. Sewer systems are not cheap,and the area has to have enough homes to support the system’s maintenance.
  • Check your bills. Sewer systems are not free,so if your house is attached to a community sewer system,you can expect to be getting bills from it.
  • Get a copy of the records for your property from your municipal government.

Are septic tank locations public record?

Contact your local health department for public records. These permits should come with a diagram of the location where the septic system is buried. Depending on the age of your septic system, you may be able to find information regarding the location of your septic system by making a public records request.

How do you find a septic tank in an old house?

Look for the 4-inch sewer that exits the crawl space or basement, and locate the same spot outside the home. Septic tanks are usually located between ten to 25 feet away from the home. Insert a thin metal probe into the ground every few feet, until you strike polyethylene, fiberglass or flat concrete.

Can a metal detector find a septic tank?

If it’s Concrete or Steel, Use a Metal Detector. Based on your conclusions in Step 3, if your septic tank is likely made from concrete or steel, a metal detector can make the task of locating it much easier. But not just any metal detector will do.

How do I find out if my septic tank is registered?

Check if your septic tank is already registered You can check if your tank has already been registered by contacting your environmental regulator. If you are unsure then it is best to check and avoid making an unnecessary payment. The NIEA and SEPA have records of all registered septic tanks.

How do I find where my septic tank is buried?

In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground. You can use a metal probe to locate its edges and mark the perimeter. If you do not find the lid by probing, shallow excavation with a shovel along the tank’s perimeter should reveal the lid.

How far is septic tank from house?

Local codes and regulations that stipulate the distance of the septic tank from the house vary depending on the locale, but the typical minimum distance is 10 feet.

How long do septic tanks last?

A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.

Can I drive over my leach field?

Can You Drive on a Septic Drain Field? No, driving over your septic drain field is similarly never ever recommended. As much as you are able to help it, prevent cars or heavy equipment (such as oil delivery trucks, swimming pool water trucks, cement mixers, and also the like) to drive straight over the field.

How much does a pump for a septic tank cost?

Average Cost To Pump A Septic Tank The national average cost to clean and pump a septic tank is between $295 and $610 with most people spending around $375. Depending on the size of your septic tank, pumping could cost as low as $250 for a 750-gallon tank, or as high as $895 for a 1,250-gallon tank.

Can you use a metal detector to find sewer lines?

Using a Plumbing Pipe Detector to Locate Underground Pipes. As a property owner there will be times when, for a variety of reasons, you will need to locate underground metal objects. For example, using a pipe locator metal detector you can easily pinpoint leaking underground pipes quickly.

Locating Septic Tanks the Old-Fashioned Way

When it comes to locating septic tanks, Ray Harrison prefers to utilize an old-fashioned listening rod.

Interested in Systems/ATUs?

Receive articles, news, and videos about Systems/ATUs sent directly to your email! Now is the time to sign up. Systems/ATUs+ Receive Notifications The chances are good that when Ray Harrison is out on a job site, he will at some time unload a long steel rod from his truck. His response: “That’s something that we utilize very much on a regular basis.” “It’s a little out of the way. “A large number of individuals have converted to cameras.” In Chestertown, Maryland, on the eastern shore of the Chesapeake Bay, he owns and operates Raymond Harrison Septic Services, and the instrument that he cherishes the most is a sounding rod.

You can tell the difference between a concrete tank and a plastic tank.

  • With a little practice, you can tell the difference between PVC and cast iron.
  • Everything is dependent on how the earth or a subterranean structure reacts to the rod.
  • PVC has a bounce to it, and it has a deeper sound than other materials.
  • It’s impossible to move something after you strike it,” Harrison explains.
  • Commercial sounding rods are available for purchase, but Harrison chooses to do the more inexpensive method.
  • It performs exactly what its name indicates for electricians: it does what it says it will do.
  • These rods are composed of galvanized steel, which ensures that they will survive for a long time, and they are available in a variety of lengths.

That’s the most manageable length.

It takes time and effort to become proficient with a sounding rod.

His father had taught him how to use the sounding rod, and he owed his success to him.

Maryland has a large number of septic systems, many of which are ancient, and Harrison receives calls from people who are unsure about the location of their septic system roughly every other week.

When utilizing any instrument to probe the earth, extreme caution should be exercised.

A “digger’s hotline” service should be installed on the electric, gas, and cable utilities prior to the arrival of workers on the job site. In the April edition of Onsite Installer, you can read a comprehensive profile of Raymond Harrison Septic Services.

How To Find My Septic Tank

  1. What is a septic tank
  2. How do I know if I have a septic tank
  3. And how do I know if I have a septic tank Identifying the location of your septic tank is critical for several reasons. The Best Way to Find a Septic Tank
  4. What to Do Once You’ve Discovered Your Septic Tank

You may have fallen in love with your new house because of its appealing good looks and characteristics, but there is almost certainly more to your new home than meets the eye. In many cases, the characteristics that make your house run more effectively and allow you to live a pleasant, contemporary life are not readily apparent. Septic tanks, for example, are an important part of your home’s infrastructure. A septic system is responsible for regulating and managing the wastewater generated by your home.

  1. “How can I locate my septic tank?” is one of the most often requested inquiries we receive.
  2. When your tank’s lid is difficult to locate – especially if you are not the original homeowner – you may be at a loss for what to do or where to look for the lid when you need it.
  3. The majority of the time, all of the components of the septic tank are buried between four inches and four feet below ground level.
  4. In order to do so, it is necessary to first comprehend the functions of septic tanks and septic systems and why it is important to know where yours is located.

How to Locate Your Septic Tank

Your septic tank’s location is not a closely guarded secret. There will be a method for you to locate it and make a note of its position for future reference, and below are a few examples of such methods.

What Is a Septic Tank?

Having a functioning septic tank is an important aspect of having an effective septic system. In the United States, around 20% of households utilize a septic system to handle their wastewater. Houses in rural parts of New England are the most likely to have a septic system, with residences in the Eastern United States being the most prevalent location for septic systems. When there are few and far between residences, it is typically more efficient and cost-effective to employ a septic system to manage wastewater rather than relying on a public sewage system to handle waste water.

Typically, a septic tank is a container that is waterproof and composed of a material such as concrete, polyethylene, fiberglass, or a combination of these.

An important function of a septic tank is to hold on to wastewater until any particulates in the water separate themselves from the water.

Any liquid that remains in the tank eventually drains into a leach field or a drainfield, where it is known as “effluent.” The dirt in the leach field aids in the filtering of the water and the removal of bacteria, viruses, and other pollutants that may be present in it.

Septic tanks erected in Onondaga County must contain input and outlet baffles, as well as an effluent filter or sanitary tees, in order to effectively separate particles from liquids during the treatment process.

How Do I Know If I Have a Septic Tank?

What is the best way to tell if your home has a septic tank? There are generally a few of different methods to tell. Examining your water bill might help you identify whether or not your house is served by a septic system or is part of the public sewage system in your neighborhood. If you have a septic system for wastewater management, you are likely to receive a charge from the utility provider for wastewater or sewer services of zero dollars. In the case of those who are fortunate enough to have a septic system, it is likely that they may not receive any water bills at all.

  • A lack of a meter on the water line that enters your property is typically indicative of the fact that you are utilizing well water rather than public utility water, according to the National Association of Realtors.
  • A septic system is likely to be installed in your home if you reside in a rather rural location.
  • Septic systems are likely to be installed in all of these buildings, which means your home is likely to be as well.
  • When a septic tank is present, it is common to find a mound or tiny hill on the property that is not a natural structure.
  • Checking your property records is a foolproof method of determining whether or not your home is equipped with a septic system.

Why It’s Important to Know the Location of Your Septic Tank

You might wonder why you should bother trying to discover out where your septic tank is. There are several important reasons for this:

1. To Be Able to Care for It Properly

The first reason you should try to locate your septic tank is that knowing where it is will help you to properly repair and care for it in the future. The standard guideline is to avoid erecting structures or placing heavy objects on top of the septic tank. It’s possible that you don’t want to park your car or truck on top of it, and you don’t want visitors to your house to park their cars on top of it, either. Due to the weight of the automobiles, there is a possibility that the tank would collapse due to excessive pressure.

2. If You Want to Landscape or Remodel Your Property

If you want to build an addition to your home or perform some landscaping around your property, you will need to know where your septic tank is located. Nothing with deep or lengthy roots should be planted on top of or in the area of your tank, since this can cause problems. If roots are allowed to grow into the pipes of your septic system, it is conceivable that your system will get clogged. When you know where the tank is going to be, you may arrange your landscaping such that only shallow-rooted plants, such as grass, are in close proximity to the tank.

For starters, the tank’s weight might lead it to collapse due to the weight of the construction. A second issue is that getting access to the tank becomes more difficult if a permanent building has been constructed on top of it.

3. If a Problem With Your Tank Occurs

Knowing where your tank is buried might also assist you in identifying problems as soon as they arise. Consider the following scenario: you wake up one morning and see that there is flooding or ponding water in the region surrounding your septic tank – a sign that your system is overwhelmed and that an excessive amount of water is being utilized all at once.

4. Ease of Getting It Fixed

Once you have determined the location of your sewer system, you can quickly send a plumber to it in the event that something goes wrong with the system, saving everyone both time and money. Get in Touch With A Plumber Right Away

1. Use a Septic Tank Map

First and foremost, make use of a road map. Using a map is frequently the quickest and most convenient alternative. Most counties keep records of the installation of septic tanks at all of their residents’ residences. These maps should include schematics that illustrate the specific placement of the tank on the land, as well as measurements that allow you to measure and locate the tank’s exact location on the property. Never mind that landmarks may shift over time depending on when the tank was built, so if there are a few more shrubs or a tree nearby, don’t rule out that location as a possibility.

  • If you are unable to locate a map or other paperwork that identifies the location of your septic tank, there are a few locations to try to see if you can obtain a map of the area.
  • The county health department is responsible for keeping track of septic systems.
  • A septic tank’s position could be depicted on a survey map, for example.
  • The creation of your own map and documentation may be worthwhile if you cannot locate a map or blueprint of your property and nothing appears to be on file regarding it at the county health department or another municipal agency.
See also:  How Often Do You Clean Your Septic Tank? (Solved)

2. Follow the Pipes to Find Your Septic Tank

Whether or not there is an existing map of your septic tank on file, or whether or not you choose to develop one for future reference or for future homeowners, you will still need to track down and find the tank. One method of accomplishing this is to follow the sewer lines that lead away from your residence. The septic tank is situated along the sewage line that goes from your home and into the yard, as we’re sure you’re aware. Find a four-inch sewer pipe in your basement or crawl space. This is the line that will lead to your septic system and should be accessible from the ground level.

  1. In general, though, you’re searching for a pipe with a diameter of four inches or more that leaves your home via a basement wall or ceiling.
  2. By inserting a thin metal probe (also known as a soil probe) into the earth near the sewage line, you can track the pipe’s location.
  3. The majority of septic tanks are located between 10 and 25 feet away from your home, and they cannot be any closer than five feet.
  4. Going via the sewage line itself is another method of locating the septic tank utilizing it.
  5. Drain snakes are typically used to unclog clogs in toilets and drains, and they may be used to do the same thing.
  6. When the snake comes to a complete halt, it has almost certainly reached the tank.
  7. While drawing the snake back, make a note of how far it has been extended and whether it has made any bends or turns.
  8. When looking for your septic tank, you may use a transmitter that you flush down the toilet and it will direct you straight to the tank.

If you only want to keep an eye on the condition of your tank and don’t need to dig it up and inspect it, you may thread a pipe camera into the sewer pipe to see what’s happening.

3. Inspect Your Yard

Septic tanks are designed to be as unobtrusive as possible when they are erected. With the passage of time, and the growth of the grass, it might be difficult to discern the visual indications that indicated the exact location of your septic tank’s installation. However, this does not rule out the possibility of finding evidence that will take you to the location of your septic tank in the future. First and foremost, you want to rule out any potential locations for your septic tank, such as:

  • Under a road or similar paved surface, for example. Right up against the house (the tank must be at least five feet away)
  • Directly in front of the home Immediately adjacent to your well (if you have one)
  • In close proximity to trees or densely planted regions
  • In the shadow of a patio, deck, or other building

Once you’ve ruled out any potential locations for your tank, it’s time to start hunting for indications as to where it may be hiding in plain sight. Keep your eyes peeled as you go about your property, looking for any inexplicable high or low points that might suggest the presence of an underground tank. When looking at your property, you could see a hill or mound on the ground, which is frequently an indication that there is a septic tank nearby. One further item to consider while searching for the right septic tank for your home is the amount of grass or other foliage in your yard.

Alternatively, if the tank was not adequately buried, you may observe a “bald patch,” which is an area where the grass is struggling to grow in the vicinity.

4. Talk to Your Neighbors

If your neighbors have septic systems as well, they may be able to assist you in locating your tank. Inquire of your neighbors about the location of their septic tanks in relation to their residences. Having a polite conversation with your neighbors regarding septic systems not only provides you with a means to figure out where yours is, but it may also serve as a friendly introduction to the other residents of your community.

5. Look for Your Septic Tank Lid

It is only the first step in the process to discover where your septic tank is located. After you’ve located your tank, the following step is to locate the lid. You can locate it with the help of your soil probe. The majority of septic tanks are rectangular in shape and measure around five feet by eight feet. The perimeter of the tank should be marked with a probe once it has been probed around. A shallow excavation with a shovel within the tank’s perimeter and near the center (or broken into halves for a two compartment tank) should show the position of the lid or lids if you are unable to feel them by probing.

The tank itself is likely to be filled with foul-smelling vapors, if not potentially hazardous ones.

What to Do After You Find Your Septic Tank

Once you’ve determined where your tank is, it’s time to bring in the specialists. Trust us when we say that opening a septic tank is not something that just anybody wants to undertake. Concrete septic tank lids are extremely heavy and must be lifted using special lifting gear in order to be removed. Since the vapors are potentially dangerous due to the contents of the tank, please respect our advice and refrain from attempting to open the tank yourself. An exposed septic tank can be hazardous to anybody wandering around your property’s perimeter, and if someone were to fall into it, it might be lethal owing to the toxicity of the sewage in the tank.

However, before you send in a team of experienced plumbers, there are a few things you can do to ensure that others do not experience the same difficulty locating the tank and to make locating the tank in the future easier.

1. Mark Its Location

The likelihood is that you will not want to post a large sign in your yard that reads “Septic Tank Here!” but you will want to leave some sort of marking so that you can quickly locate the tank and lid when you need them. In an ideal situation, the marker will be substantial enough that it will not blow away in the wind and will not be readily moved by children who are playing in the yard. A patio paver, a potted plant, or a decorative gnome or rock are just a few of the possibilities. In addition to putting a physical sign beside the septic tank, you may draw a map or layout of the area around it to illustrate its position.

2. Take Care of Your Septic Tank

Taking proper care of your tank may save you hundreds of dollars over the course of its lifetime. The expense of maintaining your system could be a few hundred dollars every few years, but that’s a lot less than the thousands of dollars it might cost to repair or replace a damaged tank or a malfunctioning septic system. Two strategies to take better care of your septic tank and system are to avoid utilizing your drain pipes or toilets as garbage cans and to use less water overall. Things like paper towels, face wipes, and cat litter should not be flushed down the toilet since they are not designed to be flushed.

In addition, installing low-flow faucets and high-efficiency toilets can help you reduce the amount of water used in your home.

For example, you don’t want to be washing load after load of laundry or running your clothes washer at the same time as your dishwasher all at the same time.

Call a Professional Plumber

Maintenance of a septic system is not normally considered a do-it-yourself activity. In the Greater Syracuse region, whether your septic tank requires pumping out or cleaning, or if you want to replace your tank, you should use the services of a reputable plumbing firm to do the job right. If you’ve attempted to locate your septic tank on your own and are still unsure of its position, it may be necessary to enlist the assistance of a professional local plumber. Our team at Mr. Rooter Plumbing of Greater Syracuse can assist you with locating, maintaining, or replacing your home’s sewage tank.

Request an Estimate for the Job

How To Find a Septic Tank Location in an Old House (Tips and Techniques)

It is important for every homeowner to be aware of the location of their septic tank. It is quite beneficial for dealing with a variety of septic system difficulties. The septic tank can be difficult to identify in some older homes, which can be a major hassle if you are moving into one.

In this post, we’ll discuss the significance of your septic tank, as well as how to determine whether or not you actually have one. Following that, we’ll go through some of the measures you may take to locate a septic tank in an old house or property.

Importance of Locating Your Septic Tank

There are a variety of reasons why it is important for you to be aware of the location of your septic tank. For starters, it makes it easier to inspect and fix your septic system. Being aware of the location of your septic tank can also assist you with any future maintenance you conduct around the property. It is impossible to avoid damage to the tank and its associated lines unless you are aware of their location. If you hire a professional, they will be able to spend more time searching for your tank.

More information may be found at:

  • How To Locate Your Septic Drain Field Lines
  • Different Types Of Septic Systems (Which Is The Best For You? )
  • How To Find Your Septic Drain Field Lines

How to Know if You Have a Septic Tank

If you have recently purchased a home, it is possible that you are unaware of the presence of a septic tank. The simplest method to find out is to look at your monthly water bill. Sewer services will not be charged if you have a septic tank, which will save you money. Additionally, the location of your home is an important factor to consider. If you live in a rural region, the likelihood that your home is equipped with a septic tank is rather high.

Where Can’t Your Septic Tank Be?

In the next part, we’ll have a look at the various strategies for locating your tank. But first and foremost, it’s crucial to note that there are several sites where your tank is not permitted. This will assist you in narrowing down your search.

Under Paved Surfaces

A tank is not permitted to be located beneath any paved surface. This refers to a driveway or a number of parking spaces.

In the House

Most individuals would probably consider this to be self-evident. Septic tanks are not permitted to be installed anyplace in your home. However, the tank is usually buried someplace outdoors, despite the fact that there are hints in your home that would lead you in the appropriate location. Can you image how bad that would smell?

Immediately Next to Your House

Tanks are not only not permitted in your home, but they are also not permitted in close proximity to your home. In accordance with the building regulations, any tank that is located within five feet of the home must be decommissioned.

Under the Patio

The same line of reasoning holds true for installing a septic tank beneath your deck, patio, addition, shed or other structure. If you notice a building in your backyard, don’t even bother looking for your tank there.

Next to Your Well

It’s safe to assume that if you have a well, there is no tank in the vicinity.

Under Trees

Anyone who wants to plant trees should avoid doing so above or near to their sewage tank. Due to the age of your home, there is a possibility that this regulation will not be effective. After the tank was initially erected, it’s possible that someone came by and planted a tree decades later. The presence of a tree near your septic tank increases the likelihood of frequent blockages and other difficulties with your system. It is usually recommended to remove any trees that are in close proximity to your septic system.

How to Find Your Septic Tank

Because your home is older, it’s possible that you don’t know who lived there before you.

That implies you won’t be able to just ask around for directions. The good news for you is that no matter how old your house is, there are a variety of methods for locating your septic tank. Before continuing, keep in mind the locations where your tank is not permitted to operate.

Look at the Drawings

Every septic system that has been installed with a permit has been documented with a drawing. These drawings are public documents, and you may obtain a copy of them by contacting the health department in your county. It may be more difficult to obtain the blueprints for certain older homes because of their age. However, it is still a smart initial step because it will provide you with the most precise information on where your tank is. These drawings show the location of your septic system, as well as a flow diagram and the components that make up your system.

See also:  How To Stop Septic Tank From Smelling?

Visually Inspect Your Yard

For the majority of folks, visual inspection of their yard is the most straightforward method of locating their tank. There are some clues to hunt for, so you get to pretend for a little while that you’re a detective on the case! You may expect the tank to be buried in your yard at some point. In older homes, the earth around the tank has had more opportunity to settle as a result of the passage of time. Here are several visible cues that indicate that you have located your septic tank: Grass that is more lush than usual Septic systems are responsible for releasing liquid waste and fertilizer into the surrounding soil.

  1. Some individuals opt to spend a few days without watering their lawn in order to see a more visible improvement in the quality of their grass.
  2. Grass that has died If you have a large patch of dead grass, this might be an indication that something is wrong with your tank.
  3. It might also be a sign of a problem with your computer system.
  4. See which area of grass thaws the fastest compared to the others.
  5. Spots of high or low pressure It is impossible to miss a little slope or pit in an otherwise level backyard.

Look at the Pipes

If you are unable to locate some hints outdoors, let us look inside. You are already aware that your plumbing drains into your septic tank, which implies that there is a line that runs from your home to the tank and back again. A pipe might be found in the crawlspace or basement of your home (typically 3-6 inches in diameter). It should be one of the only pipes that exits your home, and it has the strength to punch through a wall. This is the conduit that connects your tank to the rest of the house.

Exit your home and get to the area of your yard where the pipe is located immediately.

Because the pipe will be in a straight line, it will be simple to follow along with it.

Take a soil probe and follow the line to the end.

Concrete, polyethylene, or fiberglass are the most common types of hard, flat materials you’ll come across when looking. When you come upon a hard surface, congratulate yourself! The location of your septic tank indicates that you’ve struck gold.

Use a Pipe Camera

The usage of a pipe camera is a more high-tech alternative. This is a snake with a camera attached to the end of its tail. In order to see what’s going on, you may input the line into the machine. You’ll eventually reach your septic tank, at which point you’ll be able to exit the house and continue down the route. This also helps you to check whether there are any clogs or blockages in your line. The pipe camera also allows you to physically check the intake of your septic tank, which is an added bonus.

This product’s price and availability information will be presented on the product’s purchase page at the time of purchase.

Call a Pro

If all else fails, you may always hire an expert to assist you. They will be well aware of what to do and where to look. You could even witness them use some of the techniques described above, but these professionals will have access to equipment and expertise that is well beyond that of a typical DIYer.

Safety Tips While Searching for an Old Septic Tank

You should be on the lookout for a few additional safety dangers in your home because it is an older structure. If you see sinking dirt in locations that might potentially contain your septic tank throughout this operation, proceed with caution. Avoid going near these locations since it might be an indicator that your tank or system has collapsed, so stay away from them. Walking across these spots has the potential to cause you to fall through and into your tank, which is extremely dangerous and might be fatal.

Lastly, keep an eye out for any signs of rust on any portion of your septic system that you may come across.

You Might Also Like…

Many folks have contacted me through e-mail (typically from across the nation) to inquire about the location of their septic tank. “I have no idea,” I generally say as a helpful response to the question. I really want to add something like, “It’s just off your driveway, near that bushy thing,” or anything along those lines. But, truly, even for the most experienced searchers, septic tanks are difficult to come by. The following are some strategies you might employ to assist you in locating your tank.

  • Precaution should be exercised before you get started.
  • So, proceed with caution!
  • Please let me know if you have any queries or need assistance.
  • Get to know the beast!
  • tanks are normally buried 4 inches to 4 feet below the surface of the ground.
  • You might be astonished to hear that someone knows exactly where it is hidden in plain sight.
  • It is against the law to dig or probe in your own yard without first locating and marking the underground services.

You will receive the following tools to aid you in your search: Measurement tape, tile probe, and a shovel (if you are ambitious) The following tools are required: a metal detector (borrow or rent one since septic tanks often include iron steel rebar in the lids), and a hoagie sandwich (because locating sewage tanks makes you hungry.trust me on this).

  • Examine the basement wall to see where all of the pipes join together and exit through the basement ceiling.
  • If you don’t have a basement, walk outdoors and check for the roof vents on your house.
  • Ordinarily, the sewage line that leads to the septic tank will exit the home right below this ventilation opening.
  • On sometimes, the ancient proverb “The grass is always greener on the other side of the septic tank” is true.

Your tank may be located by probing or digging for it, and with luck, you will locate it. Keep in mind that not everything that seems to be a septic tank actually is! It’s possible that you came upon one of the following instead:

  • Rubble buried in the ground (not to be confused with Barney Ruble)
  • SepticDrywell
  • An old foundation
  • In case you happen to live in a cemetery (which is spooky), you may use a grave vault to keep your belongings safe.

After a few hours of hopelessly digging about in your yard, it will be time to eat your hoagie and take a little sleep. Following that, it will be necessary to rent or borrow a metal detector. In the event that your next-door neighbor loves Star Wars action figures or has more than three unidentified antennae on his roof, there is a significant probability that you can borrow his metal detector. If you’re lucky, the metal detector will really assist you in finding your septic tank, rather than simply a bunch of old buried automobile parts.

  1. According to local legend, a pumper known as “Zarzar The Incredible” can locate sewage tanks using a metal measuring tape spanning 30 feet in length.
  2. Continue to press your commode (“commode” sounds sophisticated) tape deeper and farther down the pipes until he “feels” the bottom of the tank with his tape.
  3. I recently acquired locate equipment that can be used to locate septic tanks, and I’m excited about it.
  4. For further information, please contact me at 574-533-1470.
  5. After that, you may have a movie of the inside of your sewer pipes created!
  6. Related: Visit our Septic System Maintenance page for more information.
  7. Services provided by Meade Septic Design Inc.
  8. Both Clients and Projects are included.
  9. Send me an email!

How Do I Find My Septic Tank

What is the location of my septic tank? Natalie Cooper is a model and actress who has appeared in a number of films and television shows. 2019-10-24T 02:52:07+10:00

How Do I Find My Septic Tank

Whether or not my property has a septic tank is up in the air. If you live on an acreage or in a rural region, it is highly probable that you have a septic tank or a waste water treatment system in your home. What Is the Appearance of a Septic Tank? The great majority of septic tanks are 1600L concrete tanks, which are common in the industry. They feature a spherical concrete top with a huge lid in the center and two little lids on the sides. They are made out of concrete. Although the lids of these tanks may have been removed or modified on occasion, this is a rare occurrence.

A tiny proportion of septic tanks have a capacity of 3000L or more.

Our expert lifts the hefty lid of a 3000L septic tank and inspects the contents.

If you have discovered a tank or tanks that do not appear to be part of a waste water treatment plant system, it is possible that you have discovered a septic tank system. To learn more about our wastewater treatment plant, please visit our Waste Water Treatment Plant website.

How Can I Find My Septic Tank?

According to standard guidelines, the septic tank should be positioned close to the home, preferably on the same side of the house as the toilet. It can be found on the grass or within a garden bed, depending on its location. Going outdoors to the same side of the home as the toilet and performing a visual check of the septic tank is a smart first step to taking in order to discover where your septic tank is. The location of the toilets from outside can be determined if you are unfamiliar with the location of the toilets (for example, if you are looking to purchase a property).

Unfortunately, the position of septic tanks can vary widely and is not always easily discernible from the surrounding landscape.

In cases where the septic tank is no longer visible, it is likely that it has become overgrown with grass, has been buried in a garden or has had a garden built over it, that an outdoor area has been added and the septic tank has been paved over, or that a deck has been constructed on top of the tank.

  • They should indicate the position of your septic tank, as well as the location of your grease trap and greywater tank, if any.
  • Alternatively, if we have previously serviced the property for a different owner, our helpful office staff can examine our records to see if there are any notes pertaining to the site.
  • A specific gadget is used to locate the location of the septic tank, and our professional will mark the location of the tank so that it may be exposed and cleaned out.
  • Using an electronic service locator, you may locate a septic tank.
  • In the event that you’re not experiencing any problems, the toilets are flushing normally, and there are no foul odors, you may ponder whether it’s best to leave things alone rather than attempting to locate and unburden a hidden septic tank.
  • Although you could wait until there is a problem, this would almost certainly result in a significant amount of additional charges.
  • Does it make sense for me to have many toilets and also multiple septic tanks?

It is decided by the number of bedrooms, which in turn determines the number of people who are anticipated to reside in the house, that the size of the septic tank should be. The following is the relationship between septic tank volumes and the number of bedrooms:

  • There are three sizes of sewer tanks available: 3000L for three bedrooms, 3500L for four bedrooms, and 4000L for five bedrooms.

The most typical septic tank size is 1600L, although there are also some 3000L septic tanks available on the market. It is possible to have septic tanks with capacities as large as 3500L or 4000L, although they are not as popular, and most residences that require these capacities have numerous septic tanks in order to meet the septic litre requirements for each bedroom. Using the septic tank lid as a test, you may quickly determine whether all of the toilets in your home are linked to the same septic tank.

Check the rest of the toilets in the home by repeating the procedure.

Please call us immediately to have your septic tank pumped out or to schedule a free septic tank test when we are next in your area.

a link to the page’s load

How to Find Your Septic Tank

Over time, all septic tanks become clogged with sediments and must be pumped out in order to continue functioning properly. Septic tank lids are frequently located at ground level. The majority of the time, they have been buried anywhere between four inches and four feet underground. In the event that you have recently purchased a property and are unsure as to where your septic tank is located, this article will give instructions on how to identify your septic tank. Noteworthy: While every property is unique, septic tanks are usually typically huge and difficult to build.

5 Ways to Find Your Septic Tank

1. Check with the municipal records. The most straightforward method of locating your septic tank is to review the building plans for your home that were approved by the local government. You should have received an application from the business that installed the septic tank, which should contain schematics and specifications that will help you to locate the precise location where the septic tank was installed. 2. Look for highs and lows in your data. The majority of septic tanks are constructed in such a way that they are barely noticeable.

  1. 3.
  2. Almost usually, your septic tank will be constructed near where the main sewage line exits your property.
  3. Septic tanks are typically positioned between ten and twenty-five feet away from a home’s foundation.
  4. When you do, that’s when your septic tank comes into play!
  5. Look for the Lid.
  6. You will most likely find two polyethylene or fiberglass covers positioned on opposing sides of the perimeter of your septic tank if it was built after 1975 and installed after 1975.
  7. Those areas should be excavated in order to disclose the lids.
  8. Get in touch with the pros.
  9. Lifting concrete lids will necessitate the use of specialized equipment.
  10. A fall into an unprotected septic tank has the potential to be lethal.
  11. Produce your own diagram of your yard, which you may file away with your other important house paperwork.

That’s all there is to it! If you’ve been wondering where your septic tank is, you now have five alternatives to choose from, which should make finding it easier than ever. To book a plumbing service in Bastrop County, please contact us now!

How to Find a Septic Tank With a Metal Detector

1. Check with the local government. To locate your septic tank, it is most likely the most straightforward method of looking through the building blueprints for your home that were prepared by the town. This application, which should include schematics and dimensions that will assist you to locate the precise location where the septic tank was built, should have been filed by the business that installed the septic tank in question. Find the highs and lows of your experience. In order to be unobtrusive, the majority of septic tanks are placed in a discreet manner.

  • Follow the rules.
  • Be a good sport.
  • Track down and mark the location of the 4-inch sewer that exits the crawl space or basement, and the same location outside the house.
  • Every few feet, insert a tiny metal probe into the earth, continuing until you reach polyethylene, fiberglass, or flat concrete.
  • The Lid may be found in Step 4.
  • You will most likely find two polyethylene or fiberglass covers positioned on opposing sides of the perimeter of your septic tank if it was built after 1975 and is older than that.
  • In order to disclose the lids, you must excavate in specific areas.
See also:  How A Septic Tank System Works? (TOP 5 Tips)

Get in touch with the professionals.

Using special lifting gear to lift heavy concrete lids will be necessary.

It is possible to die after falling into an open septic tank.

Produce your own diagram of your yard, which you can file away with your other important house documentation.

That’s it!

The good news is that you now have five alternatives for locating your septic tank, making it easier than ever to discover your tank.

How do septic systems work?

A septic system is made up of two parts: the septic tank and the drain field (or leach field).

Septic Tank

Waste from toilets, sinks, and showers is sent down a main sewage line and into a holding tank known as the septic tank. A septic tank is a large, subterranean container that acts as the initial stage of a home’s sewage treatment system by collecting and treating sewage. Watertight containers such as concrete, steel, plastic, and fiberglass are used to construct the tank. Until the particles and liquids separate into three different layers, sewage is allowed to remain in the septic tank. This picture shows how sewage from the home drains into a two-compartment underground septic tank.

The liquid wastes are subsequently discharged into the drain field.

The bacteria produce a sludge that is “digested” and stays in the tank until it is drained.

This stratum is referred to as effluent in most circles. The effluent drains out of the septic tank and into the drain field, where it is filtered by gravel and dirt before being discharged.

Drain Field

Drain fields are composed of layers of gravel and dirt that allow liquid sewage to flow down. It eventually becomes part of the groundwater supply. Aerobic bacteria (bacteria that require oxygen to survive) and other microbes decompose the organic debris that remains.

What happens if a septic tank gets too full?

In the event that your septic tank becomes overflowing, sewage may back up into your home. It is more difficult to breakdown sludge than it is to collect it. If the sludge isn’t cleaned, the solids will build up until they overflow into the drain field, causing the drain to back up. This has the potential to clog pipes and produce a backup. The sludge must be cleared on a regular basis in order to avoid this. Many households only get their tanks emptied after the system malfunctions. Waiting until that stage can result in repair expenses in the tens of thousands of dollars.

6 Steps to Locate a Septic Tank

Water from your toilets, sinks, and showers is collected in a main drain pipe and disposed of properly. This line departs your home and enters your septic tank through the basement or crawl area where it was installed. Find the line in question. Afterwards, walk outside and look for the identical location on the opposite side of the wall. Make a note of this spot since you’ll need it in a moment.

2. Check Permits and Public Records

The majority of county health agencies keep public records of septic system installation permits on their websites. These permits must be accompanied by a schematic or design depicting the proposed location of the septic tank and drainage field systems. They also give a description of the tank’s dimensions and construction material. Having this information can be quite beneficial when trying to locate a submerged tank lid. In some cases, depending on the age of your septic system and the digitization efforts of your county’s health department, you may be able to do a public records search online.

If you live in Colorado, we’ve provided links below that will allow you to check septic records in a few different areas.

  • Colorado’s counties of Adams, Arapahoe, and Douglas Colorado Septic Records Search
  • Colorado Permits Search
  • El Paso County Records Search
  • Jefferson County Septic Records Search
  • Jefferson County Records Search
  • Mesa County Septic Systems Search
  • Pueblo County Records Search. Colorado Septic Records Search
  • Pueblo County Records Search

3. Determine Septic Tank Material

If you’ve located your septic permit, you’ll find information about the size, shape, and material of your septic tank there as well. But don’t be concerned if your septic data aren’t readily available. We can perform some basic detective work to determine what material your septic system is built of. Let’s start with a look at the materials.

Types of Septic Tank Materials

Construction of septic tanks is primarily done with four types of materials: concrete, steel, fiberglass, and polyethylene plastic. Until the 1880s, the most extensively used septic tank material was concrete, which was then replaced by steel. These tanks have a lifespan of around 40 years and are built to last. They are susceptible to cracking, however, in locations where temperature variations are strong and frequent. Concrete tanks are frequently required by municipalities that have strict requirements on septic system construction.

  • Steel septic tanks begin to corrode within 20 to 25 years of installation in most regions.
  • If a human or animal walks across the weakened tank, it may collapse under the weight of the person or animal.
  • They will not break or corrode, however, in contrast to concrete or steel tanks.
  • PlasticSeptic tanks made of polyethylene have been in use since the 1980s.

They are not susceptible to rusting and are less likely to crack when compared to concrete. They are, however, not quite as long-lasting. Because of the weight of the soil above them, or because a vehicle drives over the area where they are buried, plastic tanks are susceptible to collapse.

How Old is Your House?

Next, let’s determine the approximate age of your home. In some cases, all you need to do is take a glance at the house’s façade to get an idea of how old it really is. However, you may examine the tax assessor’s records in your county to get a more precise assessment. Similarly to searching for septic records, your mileage may vary depending on which county’s digitized documents you are searching for. Let’s go over an example search utilizing Boulder County’s Property Search tool so that you can have a better sense of what you should be looking for.

  1. Look up your home address on the internet. When searching for a home, some programs provide separate areas for your address and street name, while others (such as Boulder County) merge the two into a single search box. Look for information on Deeds and/or Sales Records in the public domain. You’ll find a list of transactions here, with dates showing when the property was purchased and sold. Find the transaction that occurred on the earliest possible date. This is most likely the year in which your home was constructed.

This information allows you to make an informed guess regarding the sort of material that your septic tank is built of.

4A. If it’s Concrete or Steel, Use a Metal Detector

After coming to the conclusion that the tank is most likely built of concrete or steel in Step 3, a metal detector may be used to make the work of locating it much simpler. But not just any metal detector will do. It must be the right one. Standard metal detectors have a depth range of 6 – 8″ (15 – 20 cm) below the surface of the ground. As previously stated, the majority of septic tanks are placed 1′ to 3′ (0.3 m to 1 m) underground, putting them outside of the acceptable range. An advanced sort of metal detector known as a Magnetic Locator, which can detect objects as deep as 16′ (4.8 m), is available for purchase.

How to Use a Metal Detector to Search for a Septic Tank

If you have a septic permit record, you may refer to it to figure out how far you need to go to install a septic tank. Start at the point where the drain line meets the home and work your way out to where the septic tank is shown on the diagram. Keep in mind that this graphic depicts the proposed installation area and may not accurately depict the actual ground conditions on the site. We’ll have a look at the illustration below. One inch (2.5 centimeters) is equivalent to fifty feet (50 meters).

By using a ruler to measure the design, we’ve determined that the septic tank should be roughly 13′ (3.96 m) away from the home.

  1. To begin, start at the location you highlighted in Step 1 where the sewage drain line leaves the home. From here, you may switch on the locator and adjust the gain to a high setting. Walking over the search area, sweep the locator from left to right, as if looking for anything. As you go, make a note of the regions with the strongest signal strength. It is most likely that the tank-iron lid’s handles will be located in one of these positions
  2. As soon as you’ve exhausted the search region in one direction, sweep over it perpendicularly and make note of the spots with the strongest signal strength. Continue on to Step 5

4B. If it’s Plastic or Fiberglass, Probe Gently

Septic tanks made of plastic or fiberglass are typically buried one to two feet (0.3 to 0.91 m) below ground level. They feature circular covers made of green or black plastic that are roughly two feet (0.91 m) wide and have a diameter of around two feet (0.91 m). Due to the fact that these tanks are totally made of plastic, a metal detector will not be of use in locating them. In this situation, a soil probe is really useful. An inexpensive soil sampling instrument, soil probes are comprised of a 4′ (1.2 m) metal rod with a pointed tip on one end and are used for soil sample.

Gently poke the earth with a soil probe every 2 to 3 feet, using a light touch (0.61 to 0.91 m).

Make a note of any areas where you encounter resistance and continue exploring around in your search area. The use of a soft touch is essential here, since the metal tip of the probe can cause damage to plastic septic tanks (and sewage lines) if too much force is used.

5. Time to Dig

Following the placement of an amagnetic locator (or the probing of the ground) to record the places with the highest signal strength, you are ready to begin digging. Septic tank lids can be located anywhere from 4″ (10 cm) to 4′ (1.2 m) below the surface of the ground.

6. Mark the Location for Future Maintenance

Having discovered your septic tank, you’ll want to ensure that it can be readily detected and accessed in the event that it has to be repaired or replaced. You may accomplish this by installing a septic tank riser. Sewage Tank Risers are devices that provide for easy access to the septic tank from the ground. They are shafts made of plastic or concrete that link the top of the tank to the surface of the ground below the tank. The tank lid will no longer require you to dig to access it whenever maintenance is required.

Leave a Comment

Your email address will not be published. Required fields are marked *