How To Drain A Septic Tank? (Best solution)

  • Place the pipe from the septic tank all along each trench. Use the clamps to hold the pipe in place at the septic tank drain so it does not shift and misalign. Once the entire pipe is in place, fill the trench with another one to three inches of gravel and let the gravel work its way down around the pipe.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

  • Your Drains Are Taking Forever.
  • Standing Water Over Your Septic Tank.
  • Bad Smells Coming From Your Yard.
  • You Hear Gurgling Water.
  • You Have A Sewage Backup.
  • How often should you empty your septic tank?

How often should a septic tank be drained?

Household septic tanks are typically pumped every three to five years. Alternative systems with electrical float switches, pumps, or mechanical components should be inspected more often, generally once a year.

Why is my septic tank full of water?

The water flow backs up when your drain field floods, causing the water level in your septic tank to rise. Other common issues are plumbing and excess water use. The septic system functions as a step-by-step process which takes time to complete.

What to do after septic tank is pumped out?

After you have had your septic tank pumped by a trusted septic company, there are some things you can and should do as the septic system owner.

  1. 1) Get on a Schedule.
  2. 2) Take Care of the System.
  3. 3) Know the Parts of Your System.
  4. 4) Check Other Possible Issues.

How long does it take to pump out a septic tank?

How long does it take to pump a septic tank? A septic tank between 1,000 – 1,250 gallons in size generally takes around 20-30 minutes to empty. A larger tank (1,500 – 2,000 gallons) will take about twice as long, between 45-60 minutes.

What is the most common cause of septic system failure?

Most septic systems fail because of inappropriate design or poor maintenance. Some soil-based systems (those with a drain field) are installed at sites with inadequate or inappropriate soils, excessive slopes, or high ground water tables.

How do I clean my septic tank naturally?

You can mix about a 1/4 cup of baking soda with 1/2 cup of vinegar and 2 tablespoons lemon to make your own natural cleaning agent. The baking soda will fizz up to help get the dirt and grime in your tub and drains. It’s a great cleaner and your septic system will thank you!

Can I shower if my septic tank is full?

Unless the toilet’s overflowing or the bath spigot is filling the tub with blood, plumbers and exorcists aren’t usually on our minds. When the waste water from your toilet, shower, sinks and washing machine leave your house, it’s combined. When it hits the septic tank, however, it begins to separate.

Why do I smell septic when it rains?

Raining often causes atmospheric pressure changes, which can lead to the air becoming heavy. As such, the methane gases typically found in the septic tank don’t flow through the vent as they normally would. Instead, they stay low to the ground, causing a foul smell similar to rotten eggs.

How full should my septic tank be?

A septic tank should always be “filled” to its normal liquid level, or the bottom of the outlet pipe which carries effluent to the absorption area. This normal liquid level is usually between 8” to 12” from the top of the tank on average (see picture at right).

Can a septic tank never be pumped?

What Are the Consequences of Not Pumping Your Tank? If the tank is not pumped, the solids will build up in the tank and the holding capacity of the tank will be diminished. Eventually, the solids will reach the pipe that feeds into the drain field, causing a clog. Waste water backing up into the house.

Will toilet flush if septic tank is full?

Toilets Flush Slowly When your septic tank is excessively full, your toilet may start acting odd. You might find that your toilet doesn’t fully flush or flushes very slowly and odd noises occur when you flush your toilet. These noises usually sound like gurgling or bubbling.

How do you know when a septic tank needs emptying?

Here are some of the signs for which you should look.

  1. Water puddling above the septic tank. So you noticed a small pool of water but it didn’t rain?
  2. Drains moving slowly. If the drain is moving slowly when you flush the toilet, it could be due to a clog.
  3. Bad smells coming from the septic tank.
  4. The sewer has backed up.

Will a flooded septic tank fix itself?

Most septic tanks are not damaged by flooding since they are below ground and completely covered. However, septic tanks and pump chambers can fill with silt and debris, and must be professionally cleaned. If the soil absorption field is clogged with silt, a new system may have to be installed.

Everything You Need to Know About Emptying Your Septic Tank

The advancement of modern plumbing has brought us so far that we no longer even realize that we have drains and sewers. If the bath spigot turns a gory crimson or the toilet overflows, exorcists and plumbers are generally the last things on our minds, unless something terrible happens. Nowadays, we just press a button or pull a lever to dispose of garbage, never having to see it or even think about it again until it has been flushed down the toilet. It is the purpose of this post to draw you away from the fancy clean residential interiors and into the backyard, where a patch of green grass leads to the septic system’s covering.

These systems are designed to be straightforward, with the majority of the effluent from the property flowing through a single pipe that empties into a septic tank in the yard.

The mixture of solid and liquid waste begins to breakdown in the tank as the tank fills with water.

The proteins, oils, and fats known as scum float on top of this middle layer, which is composed mostly of grey water and known as scum.

  • The majority of septic systems are designed to discharge the effluent from the system into drain fields while leaving the scum and sludge remain in the system.
  • Because of the high concentration of organic material in the effluent, the yard where it is dumped is often the most fertile area of the yard on the premises.
  • The trouble about septic systems is that if a problem gets significant enough to need attention, it will be necessary to call in the heavy guns since basic treatments will not suffice.
  • As a result, it is necessary to do regular maintenance on the system in order to detect any problems early on, before they develop into large and expensive problems down the road.

Is it a Good Idea to Pump Your Septic Tank?

However, even if you have an in good functioning order septic tank system, with the microbial system breaking down the septage and disposing of the effluent on a properly designed drain field, the tank will accumulate scum and sludge over time. Because of this, it is extremely important to undertake routine tank pumping on a regular basis. It is always ideal to pump your tank when the scum layer has risen to approximately 6 inches from the outlet pipe or when the sludge layer has climbed to approximately 12 inches from the scum layer, respectively.

  1. The most acceptable time period for inspecting the levels in a septic tank that has been discovered to perform very well is around one year after it is installed.
  2. According to the Environmental Protection Agency, an average-sized septic tank system must be flushed at intervals of one to three years.
  3. However, the claims made by the vast majority of makers of such items are frequently shown to be grossly inflated.
  4. According to the Environmental Protection Agency, homeowners should merely perform the standard pumps and inspections, and their tanks should be good.
  5. The overflow can sometimes back up into the home when the drain and toilet flush what should be going into the septic tank back into the house.
  6. When an overflow occurs below, it may wreak havoc by draining into subterranean water, and when it occurs above ground, it might run off into rivers and streams or flood your yard.

This might be extremely hazardous to human health since untreated trash could pollute drinking water with deadly germs and illnesses such as hepatitis, which are extremely contagious.

From Yuck to Eureka!: How to Dispose of Septage

Local firms that specialize in the removal of sludge and sewage from onsite septic tank systems may be found in every neighborhood or city where there are a large number of properties with onsite septic tank systems. These services play a key role in avoiding sludge accumulation from overflowing into the sewer system, which may be harmful not only to the homeowner but also to those in the surrounding area. Typically, septic tank pumping will include a complete cleaning of the tank to remove all of the scum, sludge, and effluent that has accumulated.

  1. Fortunately, due to the fact that it poses a significant health risk, the practice has been forbidden.
  2. Sometimes the septage is mixed with the garbage generated by municipalities’ sanitary sewer systems and transferred to waste treatment plants or enterprises that treat sewage.
  3. Occasionally, though, septage is thrown in landfills, but only when rigorous criteria are adhered to.
  4. For example, according to the USDA, if you’ve ever eaten anything that didn’t come with the USDA Organic certification, it’s quite likely that the food was cultivated using sewage sludge as a fertilizer.
  5. Those in favor of it, which includes the vast majority of the farmers who would benefit from the solution, argue that everyone benefits since farmers will save money on fertilizer while towns will save the hassle of figuring out how to appropriately dispose of the waste.
  6. Farmland should filter sludge in the same way as a drain field filters effluent, ensuring that water sources remain uncontaminated.
  7. When sewage material breaks down, methane is created.
  8. Treatment plants that employ methane can generate energy through the use of fuel cells, which can be used to power other equipment.

According to a CNBC story, one such system might generate enough electricity to power up to 1000 households at the same time. I’m willing to bet you had no idea how much electricity was stored in your septic tank.

How to Clean a Septic Tank

Article in PDF format Article in PDF format Getting your tank filled is something you should prepare for. You may rely on us to assist you with the cleaning procedure! Unless properly maintained, septic tanks can get clogged with solids that are incapable of being broken down by bacteria, which can result in a costly systemic collapse. In order to maintain your tank clean, it is necessary to have frequent inspections and pumps performed on a regular basis. We’ll teach you how to uncover and clean your tank in this post, however you’ll need to hire a professional to pump the trash out.

  1. 1 Locate your tank. It is best to begin with the sewage pipe at the lowest level of your home if at all feasible. Follow the path it takes out of the house after it’s out of the house. It’s possible that your tank is buried in the ground. Identifying the tank now will save you time and money later on, regardless of whether you or an inspector clean the tank. 2 Remove the tank’s top by digging it out. It’s possible that your tank is buried underground. Take a shovel and clear away the dirt from around the top of the tank before the examination begins. Your tank will have an access port lid, which should be sturdy and well-secured when closed.
  • Risers can be placed on top of the tank for increased stability. These assist you in locating and gaining access to the tank without the need to dig. These can be added by septic system pumpers.
  • Advertisement
  • s3 Cracks should be checked on the tank. Damaged areas should be checked all the way around the tank, including the inside. Cracks must be fixed by a professional once the tank has been pumped in order to prevent the system from failing. Keep an eye out for any corroded or damaged sections on the inlet and outlet pipes that are necessary for drainage. If your tank is equipped with a distribution box or a pump chamber, make sure everything is in working order.
  • In order to determine whether or not water from your home, such as from the toilet or washing machine, makes it into your tank and subsequently drains effectively, it is helpful to run some water from your home.
  1. 1Make a slit in a pipe. Begin with a ten foot (3 m) length of PVC pipe. Separate it into two sections: a six inch (15.24 cm) segment and a nine and a half foot (2.9 m) section, using a saw or PVC cutter
  2. 2 Glue the pipes together as a group. PVC cement should be poured into the elbow joint. Using the cement and joint, attach the smaller pipe to the top of the bigger pipe. A straight pipe will protrude straight to the right or left in a “L” configuration
  3. 3cap both ends of the pipe. PVC caps may be purchased at the same hardware shop where you purchased the pipes, cement, and cutters. 4 Attach the caps to the pipes so that they are tight and prevent water from flowing through them. Insert the stick into the hole as far as it will go. Assemble the scum stick by holding it in a “L” form with the smaller pipe at the bottom and facing out to one side. Reduce the pipe’s diameter until it can be held against the top layer of septic tank waste without breaking through
  4. 5 lowering the pipe Make a mark on the stick. Make a mark on the scum’s top point with a marker or a piece of masking tape. When the pipe is resting on top of the scum layer, make a mark at the point where the pipe spans from the ground to the very top of your tank
  5. 6Push through the scum layer until the mark is no longer visible. Push the stick all the way through the muck. Some people find it necessary to twirl the stick so that the pointed end bursts through. When you get to the bottom of the scum layer, you’ll see that the stick is traveling through water rather than through the resistive fat and oil layer. Continue to hold the stick against the bottom of the scum in the same manner as you held it against the top of the scum, keeping the smaller pipe flat and off to the side so that the stick takes on the shape of a “L”
  6. 7 Make a second mark on the stick. Once again, a marker or tape should be used to designate where the scum layer terminates. Make a note at the point where the pipe crosses the ground and enters the tank’s very top
  7. Eight Measure the distance between the markers. Carefully remove the stick and place it on a tarp to catch any drips. Make a note of the distance between the two marks you created and use a tape measure to measure it. This represents the depth of the scum level. When the fat and oil layer reaches barely three inches (7.62 cm) above the bottom of the exit pipe, the tank must be pumped to remove the remaining liquid. Advertisement
  1. 1Make a slit in a pipe. Partition a ten-foot (3-meter) length of PVC pipe into five-foot (1.5-meter) portions. In order to construct a secure two-part stick, glue the pipes together as shown in the diagram. Connect the two pipes together using a straight adaptor or a threaded coupler from the hardware shop, as shown. PVC cement should be used to secure the ends in the connection
  2. 3cap each end. PVC caps are also available at your local hardware shop. Put one on either end of your stick and twist them together. It should be tightened so that no sewage may enter the pipe
  3. 4 Wrap a piece of white cloth around one end of the stick. A white cloth, towel, sock, or Velcro can be used to make a mark on the sludge to indicate the level of the sludge. Wrap the material around one end of the pipe for up to three feet (.91 m) or the whole length of the pipe, whichever is shorter. 5Push the stick through the scum hole after securing the material with the Velcro backing, tape, or string. You can drill a hole in the top layer of the tank with a stick designed for testing its scum depth if you haven’t previously done so. Then drop the sludge stick through the opening until you feel it hit the bottom of the tank
  4. 6remain in position for three minutes while you do this again. Allow for a minimum of three minutes of resting time on the stick. The longer you keep the stick in your hand, the more likely it is that the sludge will stain your white material
  5. 7Remove the stick from your hand. Continue to bring the stick back up, keeping it steady as you pull it up through the hole you formed earlier in the process. You will not discolor the stick as long as you do not move it. Prepare the stain by spreading it out on the ground where it will not be ruined and where you will be able to wipe the stick afterwards
  6. 8Measure the stain. Make a note of the length of the stain starting from the bottom of the stick with a tape measure. In order to prevent the sludge or scum from occupying more than one third of the tank’s depth (approximately 12 inches or 30.48 cm high), the tank must be pumped. It is necessary to pump the tank if the sludge layer is within six inches (15.24 centimeters) of the bottom of the output pipes. Advertisement
  1. 1 Remove the cap from the tank. During your yearly checkup, lift the tank’s lid to have a better look inside. Remove the lid and look for the pipes that lead to the waste tank and the pipes that lead to the water supply. The baffles are contained within them, and they keep scum and sludge in place.
  1. 2Remove the filters from the machine. Put on a pair of rubber gloves for protection. Reach inside the outlet baffle using your hands, a rake, or a hoe to remove the obstruction. Take the filter out of the machine. Even though it may be brightly colored and have a handle on the end, if your tank has one, it will be located inside the outflow baffle. 3Rinse the filter thoroughly. Holding the filter over the intake side of the septic tank and spraying it with a hose or dipping it in a pail of water are both options. Check to see that all of the solids have fallen back into the tank or bucket. Fill the tank with any waste that has accumulated once you have done rinsing
  2. Inspect the filter for signs of wear and tear. Examine the filter for any cracks or particles that may be obstructing it. When the filter is not cleaned on a regular basis, it becomes clogged and ceases to function. It is recommended that you replace the filter if it is not cleanable or looks to be damaged. Looking around the edges of the filter is important whether you are putting the old filter back in or installing a new one. It’s possible that the filter has an arrow on it. Ensure that the filter is correctly installed so that the arrow points downwards into the drainage system. When the filter is securely seated in the baffle, replace the tank’s lid with a firm grip. Advertisement
  1. 1 Pump the tank once every several years or as needed. Many individuals make the mistake of assuming that the tank does not require treatment as long as the piping looks to be in working order. It is possible to save thousands of dollars in costly repairs by doing regular maintenance on your tank before sludge builds up and liquid drains cease to flow. Every one to three years, or whenever the sludge and scum levels have occupied approximately one-third of the tank’s volume or have approached the exit pipe, this should be performed.
  • The smaller the tank or the greater the number of people served by the tank, the more frequently it will need to be cleaned. A 750-gallon tank, which is normal in a two-bedroom home, will sustain two people for around four years if they do not pump it. With just four inhabitants, it will survive less than two years without pumping
  • Annual treatment will maintain the tank clean and allow any issues to be addressed before they become catastrophic septic failures at a cost of a couple hundred dollars
  • And
  1. 2Clean up the garbage. Pumping is accomplished by the use of a cast-iron pump that can be turned on and off. The pump takes out the particles that are unable to be broken down by bacteria and transports them to a holding container, such as the inside of a tanker. If you remove the sludge and scum, there is no need to add bacteria or water into the system. Waste disposal for septic tanks. Even if you attempt to pump out the tank on your own, you must dispose of the trash in accordance with local regulations. The trash must be transferred by tanker to a place determined by the government that is distant from water and locations where people congregate. As a result, it is preferable to leave it in the hands of a specialist. Advertisement
See also:  How Many Mobile Homes Per Septic Tank?

Create a new question

  • Question For what reason is it risky to clean up a septic tank? David Balkan is a licensed professional plumber who also serves as the CEO of Balkan Sewer and Water Main Service and the President of Balkan Sewer and Drain Cleaning, among other positions. With over 40 years of experience as an active owner of these businesses, David is well-versed in the challenges that arise with water service lines, sewers, and drain lines. David has served on the Executive Committee of the Sub Surface Plumbers Association of New York for more than 30 years and is now the Chairman of the Master Plumbers Council’s Committee on Plumbing. As a result of his expertise and solution-oriented approach, Balkan Sewer and Water Main Service has grown to become the biggest and most trusted sewer and water main service in New York City, and the recipient of the 2017 Angie’s List Super Service Award. Answer from a Professional PlumberExpert Sewer gas, which is prevalent in septic systems, has the potential to be lethal. It’s a quiet murderer that kills in a matter of minutes, therefore I strongly warn homeowners never to attempt to repair their own septic system. Employ the services of a professional to ensure your safety.

Inquire about something There are 200 characters remaining. Include your email address so that you may be notified when this question has been resolved. SubmitAdvertisement

  • Every one to three years, have your tank examined and pumped out by a professional. A little amount of money spent on regular maintenance is preferable to dealing with a septic system that isn’t functioning properly. Higher water use, such as when numerous people reside in the house or when you use a hot tub, causes the tank to fill up more quickly. Non-waste items such as baby wipes and grease should not be disposed of. These clog the system and cause it to malfunction.

Advertisement

  • Children have been seen to fall into tanks. Make certain that the lids are robust and that they are securely fastened. Septic tanks are extremely risky to enter and operate. The wastes in the tank emit very toxic vapors, which fill the tank. Work with a companion and keep a safe distance from the entrance

Advertisement

Things You’ll Need

  • A shovel, two ten-foot (3-meter) PVC pipes, a PVC cutter or saw, PVC cement, a PVC elbow joint, a PVC connector, and four PVC end caps A white cloth, a sock, or Velcro is recommended. Tarp, measuring tape, hose and bucket, baffle filter, etc.

About This Article

Summary of the ArticleX Maintaining the cleanliness of your septic tank will save you money on costly repairs down the road. Annual filter cleaning and tank pumping are required to keep your septic tank in good working order, but you may save money by doing it yourself. Generally speaking, your filter will be positioned in the tank’s exit baffle and will be brightly colored. Cleaning it is as simple as spraying it with water from the tank or submerging it in a pail of clean water for an hour or so.

The sludge and scum levels in your tank should be pumped out every one to three years, or whenever they reach a third of the total capacity.

Continue reading for additional information, including how to measure the sludge and scum depths in your septic tank.

Thank you to all writers for contributing to this page, which has been read 68,166 times so far.

Did this article help you?

Underground wastewater treatment facilities, known as septic systems, are often employed in rural regions where there are no centralized sewage lines. They clean wastewater from residential plumbing, such as that produced by bathrooms, kitchen drains, and laundry, by combining natural processes with well-established technology. A conventional septic system is comprised of two components: a septic tank and a drainfield, often known as a soil absorption field. It is the septic tank’s job to decompose organic matter and to remove floatable stuff (such as oils and grease) and solids from wastewater.

Alternate treatment systems rely on pumps or gravity to assist septic tank effluent in trickling through a variety of media such as sand, organic matter (e.g., peat and sawdust), constructed wetlands, or other media to remove or neutralize pollutants such as pathogens that cause disease, nitrogen, phosphorus, and other contaminants.

Prior to discharging wastewater into the environment, several alternative systems are designed to evaporate or disinfect the effluent.

Specifically, this is how a typical conventional septic system works:

  1. All of the water that leaves your home drains down a single main drainage pipe and into a septic tank. An underground, water-tight container, often composed of concrete, fiberglass, or polyethylene, serves as a septic system’s holding tank. Its function is to retain wastewater for a long enough period of time to allow particles to sink to the bottom and form sludge, while oil and grease float to the surface and produce scum. Sludge and scum are prevented from exiting the tank and moving into the drainfield region by compartments and a T-shaped outlet. After that, the liquid wastewater (effluent) exits the tank and flows into the drainfield. The drainfield is a shallow, covered hole dug in unsaturated soil that serves as a drainage system. Porous surfaces are used to release pretreated wastewater because they allow the wastewater to pass through the soil and into the groundwater. In the process of percolating through the soil, wastewater is accepted, treated, and dispersed by the soil, finally discharging into groundwater. Finally, if the drainfield becomes overburdened with too much liquid, it can flood, causing sewage to flow to the ground surface or resulting in toilet backups and sink backups. Finally, wastewater percolates into the soil, where it is naturally removed of harmful coliform bacteria, viruses, and nutrients. Coliform bacteria are a kind of bacteria that may be found in the intestines of humans and other warm-blooded animals, with humans being the most common host. As a result of human fecal contamination, it is a sign of this.

The Guadalupe-Blanco River Authority has built an animated, interactive model of how a residential septic system works, which you can view here.

Do you have a septic system?

It’s possible that you’re already aware that you have a septic system. If you are not sure, here are some tell-tale symptoms that you most likely are:

  • You make use of well water. In your home, the water pipe that brings water into the house does not have a meter. In the case of a water bill or a property tax bill, you will see “$0.00 Sewer Amount Charged.” It is possible that your neighbors have a septic system

How to find your septic system

You can locate your septic system once you have confirmed that you have one by following these steps:

  • Taking a look at the “as constructed” drawing of your house
  • Making a visual inspection of your yard for lids and manhole covers
  • Getting in touch with a septic system service provider for assistance in locating it
See also:  How To Treat A Septic Tank? (Solution found)

Failure symptoms: Mind the signs!

A bad odor is not necessarily the first indicator of a septic system that is failing to work properly. Any of the following signs should prompt you to seek expert assistance:

  • Water backing up into the drains of homes and businesses
  • It is especially noticeable in dry weather that the drainfield grass is bright green and spongy. The presence of standing water or muddy soil near your septic system or in your basement
  • A strong stench emanating from the area surrounding the septic tank and drainfield

How to Care for Your Septic System

Septic system maintenance is neither difficult or expensive, and it does not have to be done frequently. The maintenance of a vehicle is comprised of four major components:

  • Inspect and pump your drainfield on a regular basis
  • Conserve water
  • Dispose of waste properly
  • And keep your drainfield in good condition.

Inspect and Pump Frequently

Inspection of the ordinary residential septic system should be performed by a septic service specialist at least once every three years. Household septic tanks are normally pumped every three to five years, depending on how often they are used. Alternative systems that use electrical float switches, pumps, or mechanical components should be examined more frequently, typically once a year, to ensure that they are in proper working order. Because alternative systems contain mechanical components, it is essential to have a service contract.

  • The size of the household
  • The total amount of wastewater produced
  • The amount of solids present in wastewater
  • The size of the septic tank

Service provider coming? Here is what you need to know.

When you contact a septic service provider, he or she will inspect your septic tank for leaks as well as the scum and sludge layers that have built up over time. Maintain detailed records of any maintenance work conducted on your septic system. Because of the T-shaped outlet on the side of your tank, sludge and scum will not be able to escape from the tank and travel to the drainfield region. A pumping is required when the bottom of the scum layer or the top of the sludge layer is within six inches of the bottom of the outlet, or if the top of the sludge layer is within 12 inches of the bottom of the outlet.

In the service report for your system, the service provider should mention the completion of repairs as well as the condition of the tank.

An online septic finder from the National Onsite Wastewater Recycling Association (NOWRA) makes it simple to identify service specialists in your region.

Use Water Efficiently

In a normal single-family house, the average indoor water consumption is about 70 gallons per person, per day, on average. A single leaking or running toilet can waste as much as 200 gallons of water each day, depending on the situation. The septic system is responsible for disposing of all of the water that a residence sends down its pipes. The more water that is conserved in a household, the less water that enters the sewage system.

A septic system that is operated efficiently will operate more efficiently and will have a lower chance of failure. The Environmental Protection Agency’s WaterSense program offers several simple strategies to conserve water as well as water-efficient goods.

  • Toilets with a high level of efficiency. The usage of toilets accounts for 25 to 30% of total home water use. Many older homes have toilets with reservoirs that hold 3.5 to 5 gallons of water, but contemporary, high-efficiency toilets consume 1.6 gallons or less of water for each flush. Changing out your old toilets for high-efficiency versions is a simple approach to lessen the amount of household water that gets into your septic system. Aerators for faucets and high-efficiency showerheads are also available. Reduce water use and the volume of water entering your septic system by using faucet aerators, high-efficiency showerheads, and shower flow restriction devices. Machines for washing clothes. Water and energy are wasted when little loads of laundry are washed on the large-load cycle of your washing machine. By selecting the appropriate load size, you may limit the amount of water wasted. If you are unable to specify a load size, only complete loads of washing should be performed. Washing machine use should be spread throughout the week if at all possible. Doing all of your household laundry in one day may appear to be a time-saving strategy
  • Nevertheless, it can cause damage to your septic system by denying your septic tank adequate time to handle waste and may even cause your drainfield to overflow. Machines that have earned theENERGY STARlabel consume 35 percent less energy and 50 percent less water than ordinary ones, according to the Environmental Protection Agency. Other Energy Star appliances can save you a lot of money on your energy and water bills.

Properly Dispose of Waste

Everything that goes down your drains, whether it’s flushed down the toilet, ground up in the trash disposal, or poured down the sink, shower, or bath, ends up in your septic system, which is where it belongs. What you flush down the toilet has an impact on how effectively your septic system functions.

Toilets aren’t trash cans!

Your septic system is not a garbage disposal system. A simple rule of thumb is to never flush anything other than human waste and toilet paper down the toilet. Never flush a toilet:

  • Cooking grease or oil
  • Wipes that are not flushable, such as baby wipes or other wet wipes
  • Photographic solutions
  • Feminine hygiene items Condoms
  • Medical supplies such as dental floss and disposable diapers, cigarette butts and coffee grounds, cat litter and paper towels, pharmaceuticals, and household chemicals such as gasoline and oil, insecticides, antifreeze, and paint or paint thinners

Toilet Paper Needs to Be Flushed! Check out this video, which demonstrates why the only item you should flush down your toilet are toilet paper rolls.

Think at the sink!

Your septic system is made up of a collection of living organisms that digest and treat the waste generated by your household. Pouring pollutants down your drain can kill these organisms and cause damage to your septic system as well as other things. Whether you’re at the kitchen sink, the bathtub, or the utility sink, remember the following:

  • If you have a clogged drain, avoid using chemical drain openers. To prevent this from happening, use hot water or a drain snake
  • Never dump cooking oil or grease down the sink or toilet. It is never a good idea to flush oil-based paints, solvents, or huge quantities of harmful cleansers down the toilet. Even latex paint waste should be kept to a bare minimum. Disposal of rubbish should be avoided or limited to a minimum. Fats, grease, and particles will be considerably reduced in your septic tank, reducing the likelihood of your drainfield being clogged.

Own a recreational vehicle (RV), boat or mobile home?

If you have ever spent any time in an RV or boat, you are undoubtedly familiar with the issue of aromas emanating from sewage holding tanks.

  • The National Small Flows Clearinghouse’s Septic System Care hotline, which may be reached toll-free at 800-624-8301, has a factsheet on safe wastewater disposal for RV, boat, and mobile home owners and operators.

Maintain Your Drainfield

It is critical that you maintain the integrity of your drainfield, which is a component of your septic system that filters impurities from the liquid that emerges from your septic tank once it has been installed. Here are some things you should do to keep it in good condition:

  • Parking: Do not park or drive on your drainfield at any time. Plan your tree plantings so that their roots do not grow into your drainfield or septic system. An experienced septic service provider can recommend the appropriate distance for your septic tank and surrounding landscaping, based on your specific situation. Locating Your Drainfield: Keep any roof drains, sump pumps, and other rainfall drainage systems away from the drainfield area. Excess water causes the wastewater treatment process to slow down or halt completely.

Septic Tank Pumping Procedure – Pumping out the Septic Tank

  • Fill out the form below to ask a question or to make a comment on the stages and procedures involved in pumping out and cleaning a septic tank

InspectAPedia does not allow any form of conflict of interest. The sponsors, goods, and services described on this website are not affiliated with us in any way. Details on how to pump out or clean a septic tank may be found here. In this septic tank pumpout article series, you’ll learn how to locate, open, pump out, clean, and inspect conventional septic tanks, as well as how to locate, open, pump out, clean, and inspect conventional septic tanks using photos. In addition to septic pumping tank truck operators, this guideline is meant to provide basic information to homeowners and septic service providers that are concerned about septic system maintenance.

For this topic, we also have anARTICLE INDEX available, or you may check the top or bottom of the page.

Pumping Out the Septic Tank – how the solidswaste are removed from a septic tank

InspectAPedia does not allow any form of conflict of interest. The sponsors, goods, and services described on this website are not affiliated with us in any way. Details on how to pump out or clean a septic tank may be found here. In this septic tank pumpout article series, you’ll learn how to locate, open, pump out, clean, and inspect conventional septic tanks, as well as how to locate, open, pump out, clean, and inspect conventional septic tanks using photos. In addition to septic pumping tank truck operators, this guideline is meant to provide basic information to homeowners and septic service providers that are concerned about septic system maintenance.

For this topic, we also have anARTICLE INDEX available, or you may check the top or bottom of the page. Use the SEARCH BOX to discover the information you’re looking for quickly.

Reader CommentsQ A

Last month, our septic system overflowed into two bathrooms, which was a nightmare. According to the report, the circuit breaker had tripped and the sump pump was not operating properly. Because it had been 5 years since the tank had been filled, I phoned a local pumper to empty it. Surprisingly, they just opened the overflow tank and pumped the contents of it. That is something I have never seen before. We’ve always had the septic tank itself opened and pumped, which is a good thing. When I questioned the pumper, they said that pumping the auxiliary/overflow tank was standard procedure.

  1. Is it possible that we were duped?
  2. When the tank’s inlet and exit baffle conditions are checked, the task is done better, and providing a second access point may make cleaning sludge and crud at that end easier to reach.
  3. In the intake end of the tank, I’ve drilled a hole and exposed one at a depth of around 13 inches.
  4. Thank you in advance for any advise you may provide!
  5. It is dependent on the pumping machinery used by the individual pumper truck, as well as the horizontal and vertical lift lengths involved.
  6. During this section, we will discuss the limitations of septic tank pumper trucks in terms of both horizontal distance and vertical lift.
  7. In order to pump out the septic tank, how near does the truck need to get to the tank?

Question: pumper said can’t pump septic tank because of hair

A photo shows evidence that some buildings may really be exposed to significant amounts of hair: thick clumps of dog hair were dragged into this water heater draft hood, causing the heater to become dangerous and putting the occupants at risk of carbon monoxide poisoning On May 24, 2020, a hair in a septic tank stated: I had a septic tank pumping business come out to my house. This is something I do every three years (1000 gallon tank). The operator informed me that he would be unable to pump it because I had an excessive amount of hair in the machine.

He stated that he would consult with his supervisor, but that he would consider a chemical therapy and retrying in three months.

I’m happy I did, because some of these therapies may be really hazardous to your health. I was wondering if there was a way to get around this hair problem (ie: chopping it up then suction or using a larger pump tube size to extract). Any suggestions would be much appreciated.

Moderator reply: Problems Caused by Hair in the Septic Tank?

Unusual circumstances, such as finding so much hair in a sewage tank that the tank cannot be drained, require more inquiry. It is also necessary to clarify that the hair is indeed hair, and to provide an explanation. You may want the services of a septic pumping contractor who is equipped with a reliable grinder pump. But first and foremost, we must determine whether or not there is a blocking item in your septic tank, and if there is, how it got there and what exactly it is. When it comes to septic tank hair, don’t rely on chemical treatments to “fix” the problem.

Is it conceivable that roots have infiltrated your septic tank and caused damage?

Details: hair may clog traps and drains, but a clogged septic tanks such that it can’t be pumped would be unusual.

I was taken aback by your remark that there is so much hair in your septic tank that it is impossible to clean the tank properly. It is not possible for hair to disintegrate in the drain system or in the septic tank, whether it comes from people or pets. Although the regular amounts of hair entering the building drain/waste pipe system from routine family washing and bathing do not generally cause problems in the septic tank, they can cause clogging at the drain or trap of a sink, shower, or bathtub.

Large amounts of hair can potentially clog a septic pump or a lift pump, depending on their design.

Having that much hair in a sewage tank that it prevents the tank from being pumped by the septic pumping truck would be an unusual and difficult thing to explain to others.

Septic pumper trucks can usually handle hair as well as floating scum and settled sludge

In most cases, the hose on a septic tank pumper truck is three inches in diameter, and the pumps on septic tank pumper trucks are powerful enough to suck up tiny boulders as well as remove the floating scum layer and settled sludge layer from a septic tank. In reality, while researching and producing the septic pump vacuum pump article I referenced above, we discovered that the word “hair” did not appear in any of the septic pumper truck pump specs or descriptions. See the website for further information.

  • In most cases, the pumper can pump through even the thickest hardened floating scum layer or settled sludge layer that has accumulated.
  • On rare occasions, a pumper may actually add water to the septic tank in order to aid in the breakdown of solids prior to pumping.
  • That advice, in my opinion, may imply that the person who is proposing it has a limited grasp of how septic systems operate and must be corrected.
  • As soon as someone runs ANY plumbing fixture in the building, the chemical, which has already been diluted by the liquid volume of the septic tank, is pushed out into the drainfield.
  • 2.
  • Insist on having your septic tank inspected by a qualified septic tank cleaning specialist and report back to us with the results.

Continue reading atINSPECT the SEPTIC TANK DURING PUMPING, or choose a topic from the closely-related topics listed below, or see the completeARTICLE INDEX for a comprehensive list of articles. Alternatively, consider the following:

Septic Tank Pumping Articles

  • PUMPER TRUCK VACUUM PUMPS
  • HOW TO FIND A SEPTIC TANK
  • SEPTIC TANK LEVELS OF SEWAGE
  • SEPTIC TANK PUMPING MISTAKES
  • ERRORS IN THE TIMING OF THE SEPTIC TANK’S PUMPOUT
  • SEPTIC SYSTEM BACK-PUMPING-consumer warning
  • SEPTIC TANK OBJECTIVE INFORMATION
  • SEPTIC TANK PUMPOUT TIMING ERRORS
  • WHEN SHOULD A SEPTIC TANK BE CLEANED
  • WHEN SHOULD A SEPTIC TANK NOT BE PUMPED
  • SEPTIC TANK INSPECTION PROCEDURE
  • SEPTIC TANK LEVELS OF SEWAGE
  • PUMPER TRUCK OPERATION PROCEDURE
  • PUMPING THE SEPTIC TANK
  • CLEANING SEPTIC TANKS
  • WHEN TO CLEAN THE SEPTIC TANK
  • WHEN NOT TO PUMP A SEPTIC TANK
  • FINDING THE SEPTIC TANK, HOW TO
  • HOW TO OPEN A SEPTIC
  • BEFORE PUMPING, INSPECT THE SEPTIC TANK
  • AFTER PUMPING, INSPECT THE SEPTIC TANK
  • CLOSE THE SEPTIC TANK
  • INSPECT THE SEPTIC TANK
  • NOTE THE LOCATION OF THE SEPTIC TANK AND THE CONCLUSIONS OF THE SEPTIC PUMPING.
  • Reasons for Septic Tank Pumping
  • Septic Tank Pumping Schedule
  • Septic Tank Safety
  • Septic Tank Chemicals
  • Septic Tank Pumping Reasons
See also:  How Many Mobile Homes Per Septic Tank?

Suggested citation for this web page

PUMPING THE SEPTIC TANKatInspect A pedia.com is an online encyclopedia of building and environmental inspection, testing, diagnosis, repair, and issue avoidance guidance for the construction industry.

INDEX to RELATED ARTICLES:ARTICLE INDEX to SEPTIC SYSTEMS

Alternatives include asking a question or searching InspectApedia using the SEARCH BOXfound below.

Ask a Question or Search InspectApedia

If you have any questions, answers, or comments concerning the methods and procedures involved in pumping out and cleaning a septic tank, please post them here. We encourage you to use the search box just below, or if you prefer, you may make a question or remark in theCommentsbox below and we will get back to you as soon as possible. InspectApedia is a website that allows you to search for things. Please keep in mind that the publication of your remark below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link.

We sincerely apologize for the inconvenience.

Technical ReviewersReferences

Citations can be shown or hidden by selecting Show or Hide Citations. InspectApedia.com is a publisher that provides references. Daniel Friedman is an American journalist and author.

How to Care for Your Septic Tank

Septic systems are built in around one-fourth of all residences in the United States, and they are particularly common in rural regions that are not served by municipal sewer systems. In contrast to conventional sewage systems, which pump solid and liquid waste from the home into sewer mains and then to a centralized sewage treatment plant, septic systems pump waste from the house out into a drain field and an underground septic tank.

How Septic System Works

The water and wastes carried by the water in a standard septic system go down the home’s drain system and through a single main sewer pipe to the septic tank, where they are treated. It is possible for wastewater to flow only by gravity or with the aid of an electric pump. However, this is not always the case. The septic tank is designed to store waste material for an extended period of time, allowing solids to sink to the bottom while oil, grease, and liquids – later known as scum — float to the top.

As bacterial activity breaks down the pathogens, the liquids slowly trickle down through the soil and into the groundwater.

Between times, the solids in the tank degrade under the influence of anaerobic bacteria and form an oily substance that settles at the bottom of the tank.

Anaerobic bacteria are responsible for this decomposition. If the bacterial action is efficient, the volume of these solid wastes is significantly decreased as they decompose. Margot Cavin’s The Spruce is a novel about a woman who grows up on a spruce grove.

Anatomy of a Septic Tank

The septic tank is a water-tight container constructed of concrete, fiberglass, or polyethylene that is placed in the ground in a location close to the house to collect waste. It is comprised of an entrance pipe through which all waste from the home’s sewage line is directed into the tank and an output pipe through which liquids are directed to the drain field. Unless you look closely, the top of the tank is buried just below the level of the earth and is completely inaccessible except for one or two inspection tubes and a manhole cover, which is used to pump sludge from the tank when it becomes required.

When to Have Your Septic Tank Pumped

An inspection of a septic tank should be performed every two to three years, with mechanical pumping necessary every three to five years to empty the tank, according to the Environmental Protection Agency (EPA). Pumping may be required on a yearly basis for systems that are inadequate or that receive a lot of demand. System components such as electrical float switches, pumps, and mechanical components must be examined more frequently, generally once a year, in certain cases. When you pump your septic tank, you’re getting rid of sludge from the bottom of the tank, and you need to do it as soon as possible since sludge can build up to the point where it stops the outflow pipe, which allows liquids to flow into the drain field.

  • Typical for larger houses, waste generation increases, causing the septic tank to fill up more quickly
  • Size of the household The amount of wastewater produced is as follows: If there is an excessive amount of wastewater going into the septic tank, it might have an impact on how quickly the tank fills. The amount of particles included in the wastewater is as follows: Households with a large number of toilets or who often use garbage disposals have a tendency to fill their septic tanks more quickly. Septic tank capacity: Larger tanks can retain more solid sludge and, as a result, will need to be pumped less frequently.

There are a few methods that might assist you in estimating when you should have your tank pumped. For example, a typical four-bedroom house may have a 1,200 to 1,500 gallon tank, and if you have a family of four, you may expect to have the tank pumped every 3 to 5 years under normal circumstances.

How a Septic Tank Is Pumped

The expert who inspects and services your septic tank will notify you when it is necessary to pump out the sludge from the tank, if you have a septic service professional who does so on a regular basis. This occurs when the floating scum layer that exists between the sludge and the floating water is within approximately 6 inches of the outflow pipe leading to the drain field. Septic service specialists arrive in a huge tanker truck with vacuum equipment, and when the lid has been removed from the septic tank, they introduce a large hose into the tank through the manhole they have created.

This helps to break up the particles and mix them with the liquid material, which helps the pumping process run more efficiently.

Tips for Maintaining Septic System

There are various proactive actions you can take to ensure that your septic system runs properly and that the frequency with which it must be pumped is reduced. These include the following:

  • Reduce your water use. Utilizing toilets and faucets with high water efficiency and water conservation may significantly reduce the quantity of water that enters the septic system and causes it to backup. Water leaks and drips should be repaired as soon as possible in order to avoid misuse of water, which can lead to the septic tank filling up faster. Reduce the amount of solid trash produced: Another technique to ensure that the septic system is operating correctly is to keep track of the solid waste that enters it. Trash that is either washed down the drain or flushed down the toilet can cause the septic system to become overburdened. Other than toilet paper, don’t flush anything down the toilet. Also, avoid utilizing a trash disposer that dumps organic food wastes into the septic system, which might cause problems. Even though it takes just a small amount of work, throwing things in the trash makes a significant impact in how well the septic system is managed. Rainwater should be directed away from the drain field. Rain gutters and landscaping grading that direct water into the septic system’s drain field can impair the field’s capacity to distribute water from the septic system.
  • Hot tubs should not be drained into the sewer system. Water from hot tubs or swimming pools should be discharged onto the yard rather than into the drain field, since this might impose an unnecessary strain on a septic system. It is best not to flush chemicals down the toilet. Avoid flushing chemicals down the toilet because they can interfere with the bacterial process that breaks down solid wastes. There are also several other commercial septic tank additives, which are often more harmful than beneficial. Use of septic tank chemicals is not recommended unless it has been prescribed by a trustworthy specialist.

Everything You Need to Know About Septic Tank Cleaning

Septic tanks are tanks that are capable of being linked to a home’s plumbing system, as described above. They are frequently employed in rural locations where municipal sewage lines have not been established or are not already in use.

Maintaining a clean, functioning septic tank is essential. This may be accomplished by having it pumped on a regular basis. Here’s all you need to know about maintaining the cleanliness of your tank.

Why Do You Need to Clean a Septic Tank?

Whenever you flush a toilet in your house, take a shower, or operate the washing machine, the used water and trash are transferred to your septic tank for proper disposal. In order for liquid to be transported out of the tank and into a drain field, the septic tank must be built in this manner. Waste, on the other hand, sinks to the bottom of the tank and remains there. After a period of time, the waste decomposes into a slimy or sludge-like substance. Pumping the tank eliminates this sludge material, keeping your tank from becoming so backed up that it becomes unable to operate or from overflowing into your backyard.

Can You Clean a Septic Tank Yourself?

Technically, it is possible to clean a septic tank on your own. Professionals, on the other hand, strongly advise against doing so. Cleaning a septic tank is a difficult and time-consuming operation. It takes a lot of effort. Incorrect use of the tank can result in harm to the tank as well as poor waste disposal or failure to remove all of the trash from the tank. There are a variety of reasons why you should employ a professional to clean your septic tank. A expert will be able to find and uncover your tank in a short period of time.

Besides that, a professional has the expertise and skills to remove all of the trash from your tank and dispose of it in an appropriate manner.

How Frequently Does Your Tank Need to Be Cleaned?

It is necessary to get your septic tank pumped on a regular basis in order to maintain it clean. You may be asking how frequently your tank should be pumped as a result of this. There are a variety of factors that influence how frequently your tank has to be pumped, including the tank’s size and location in your home, the number of people who live there, the quantity of waste generated by your household items, and whether or not you utilize enzymes or bacteria in your tank. In light of these considerations, a septic tank specialist may make an estimate of how frequently your tank should be flushed.

How Do You Know When Your Tank Is Due for Cleaning?

Your tank may also give you indications that it is time to get it cleaned in addition to presenting you with an anticipated pumping schedule from a septic specialist. When your tank needs to be pumped, you may notice that water is slowly draining from your house. When taking a shower, you may observe water puddling around your feet or sink water slowly draining away when doing the dishes. The presence of foul odors in your septic tank is another indication that it needs to be flushed. It is possible that scents will be present when your tank is completely full.

Finally, if your tank is overdue for a pumping, it may begin to overflow as a result of the delay.

Make sure you are aware of the location of your tank so that you can keep an eye out for any standing water in the region.

All of your septic tank needs may be met by Al’s Septic Tank Service, which serves the greater Pauline, SC region. We can assist you with anything from cleaning to inspections to maintenance and repairs. To book an appointment, please contact us right away.

Leave a Comment

Your email address will not be published. Required fields are marked *