How Much Does A 500 Gallon Septic Tank Cost? (Solved)

The average cost to install a new septic system will run you about $7125.00 for a complete septic tank system, including a tank, drainage pipes and drain field.

Septic System Cost By Tank Size.

500-gallon $500–$800
1250-gallon $2000–$2500
1500-gallon $2200–$2700

2

How much is an used 500 gallon propane tank worth?

  • Used propane tanks are often sold on craigslist or other sites for anywhere from 75 cents to $1.25 per gallon capacity ($375-$625 for a 500-gallon tank), depending on local prices. Check with local propane dealers about costs and requirements for testing and certifying a used tank.

How long does it take to fill up a 500 gallon septic tank?

It takes years between having the tank pumped for the septic tank to fill to its capacity. The average usage for a family of four will fill a septic tank to its working capacity of 1000 – 1500 gallons in approximately one week.

Is a 500 gallon septic tank big enough?

A rule of thumb is the tank should be at least 400 gallons bigger than the amount of water it’ll handle. For example, if your water usage per day is 500 gallons then the septic tank should be 900 gallons.

How often should you empty a 500 gallon septic tank?

But here are some general guidelines: Family of 2, 500-gallon tank – pump every 2.5 years. Family of 3, 1000-gallon tank – pump every 4 years. Family of 5, 1000-gallon tank – pump every 2 years.

How do you know if septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

  1. Your Drains Are Taking Forever.
  2. Standing Water Over Your Septic Tank.
  3. Bad Smells Coming From Your Yard.
  4. You Hear Gurgling Water.
  5. You Have A Sewage Backup.
  6. How often should you empty your septic tank?

Does shower water go into septic tank?

From your house to the tank: Most, but not all, septic systems operate via gravity to the septic tank. Each time a toilet is flushed, water is turned on or you take a shower, the water and waste flows via gravity through the plumbing system in your house and ends up in the septic tank.

How big of a septic tank do I need for a 3 bedroom house?

The correct size of the septic tank depends mostly on the square footage of the house and the number of people living there. Most residential septic tanks range in size from 750 gallons to 1,250 gallons. An average 3-bedroom home, less than 2500 square feet will probably require a 1000 gallon tank.

How much does it cost to pump a septic tank?

How much does it cost to pump out a septic tank? The average cost is $300, but can run up to $500, depending on your location. The tank should be pumped out every three to five years.

Can a septic tank never be pumped?

What Are the Consequences of Not Pumping Your Tank? If the tank is not pumped, the solids will build up in the tank and the holding capacity of the tank will be diminished. Eventually, the solids will reach the pipe that feeds into the drain field, causing a clog. Waste water backing up into the house.

Will Coke hurt a septic system?

Dumping a few ounces or even a can of Coke®, Pepsi®, RC Cola® or any other soft drink into a septic system won’t hurt the system.

How long does a septic system last?

A septic system’s lifespan should be anywhere from 15 to 40 years. How long the system lasts depends on a number of factors, including construction material, soil acidity, water table, maintenance practices, and several others.

How far down is septic tank lid?

Often, septic tank lids are at ground level. In most cases, they have buried anywhere from four inches to four feet underground.

How often should a septic tank be pumped?

Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.

500 Gal. Plastic Septic Tank for Sale

  • The following items are available: 500 gallon septic tank (Snyder PartST21L)88″ L x 48″ W x 43″ H1 CompartmentFOB MS-$0.01
  • 500 gallon septic pump tank (Ace Roto-Mold PartAST-0500-163″ L x 63″ W x 74″ H1 CompartmentFOB IASpecial Price)
  • 500 gallon septic tank (Ace Roto-Mold Part Norwesco Part4078564, a 500-gallon septic pump tank, costs $932.99 “L x 64″ W x 67″ H1 CompartmentFOB California, Minnesota, New York, Ohio, Oklahoma, Utah, Washington Discounted Rate Norwesco Part4352297″ L x 48″ W x 42” H
  • 500 Gallon Low Profile Septic Tank $962.99
  • 500 Gallon Low Profile Septic Tank “H1 CompartmentFOB Mississippi, New York, Ohio, and Oklahoma From:$999.99 Up to: $1,648.94
  • 500 Gallon Septic TankNorwesco Part41320101
  • “51” L x 47″ W x 47″ H1 CompartmentFOB Georgia, Minnesota, Mississippi, Utah, WashingtonSpecial Price A 525 gallon septic pump tank that is approved by the state of Florida costs $1,047.99 and is 44″ long by 64″ wide by 67″ high “H1 CompartmentFOB FLSpecial Pricing H1 Compartment Norwesco Part44863130, a 500-gallon above-ground septic holding tank, is available for $1,133.99 “No CompartmentFOB MississippiSpecial PriceL x 52″ W x 22” H $1,149.99
  • 500 Gallon Septic Pump TankSnyder Part5170000W9420360″ L x 60″ W x 63″ HSnyder Part5170000W9420360″ L x 60″ W x 63″ H “H1 CompartmentFOB Arkansas, California, Mississippi, and WisconsinSpecial Price a 500-gallon low-profile septic tank with plumbing already installed for $1,222.99 (Snyder Part4580297 “FOB Arkansas, California, Mississippi, Nebraska, and WashingtonSecondary Price$1,319.99
  • Special Price$1,319.99
  • NTO Part1000GB is a 1000 gallon above ground septic holding tank that is 136 inches long by 91 inches wide by 20 inches high “FOB MSSpecial Price$2,399.99
  • HNo CompartmentFOB MS

How much does it cost to install a 500 gallon septic tank?

Septic Tank Prices Vary Based on House Size and Gallon Capacity

Tank Material Tank Gallon Size Tank Cost
Polyethylene 500 $725
Polyethylene 750 $1,200
Polyethylene 1,000 $1,310
Fiberglass 1,000 $2,300

From $3,280 to $9,550 is the typical cost of installing a newseptic system. The average cost of a simple septic system for a three-bedroom home is $3,918; however, the majority of homeowners pay between $3,280 and $5,040. A system with two alternating pumps will cost you between $9,500 and $15,000 to install and maintain. Beside above,how much does a 1000 gallon concrete septic tank cost? The majority of septic tanks are constructed of concrete, but you may also come across tanks constructed of steel, fiberglass, or polyethylene.

I’m wondering how much a 750-gallon septic tank would cost.

Concreteseptic tanksranging from750 gallonsto 3,000gallons: $1,300-$5,000.

If there are no missteps, such as those discussed in this article, a field like this may persist anywhere from 10 to 20 years.

Septic Tank Installation and Replacement Cost

The typical cost in the United States ranges from $500 to $5,000. The national average cost of a septic tank installation or the cost of replacing an outdated septic system is dependent on a number of different variables.

Septic Tank Installation Average Costs
National Minimum Cost $500
National Maximum Cost $5000
National Average Cost $1500

According to the Environmental Protection Agency, one in every five residences in the United States relies on a septic system for wastewater management (EPA). In the case of septic systems, you may have a septic system for your home alone, or you may be connected to a communal system that services a small number of homes. Untreated wastewater created by a house or company is treated on site by a septic system, which is an on-site treatment system. Sewage lines convey wastewater from your shower, toilet, sinks, clothes washer, and trash disposal away from your home and into a septic tank buried in your yard.

Solids are separated from floatable debris in the septic tank, and the leftover liquid drains from the tank through a series of perforated tubes and onto a drain field or leach field after being separated in the tank.

The usage of septic systems is popular in rural regions that do not have access to a centralized municipal sewer system.

Tank capacity ranges from less than 1,000 gallons to more than 2,000 gallons, with the size of the tank determined by the quantity of water you consume on a daily basis.

Condos, apartments, residences, business spaces, and other types of structures might benefit from septic system installation or replacement services.

What’s in this cost guide?

  • Soil type
  • Tank size and kind
  • Equipment
  • Installation
  • Maintenance
  • Lift station
  • And more. Septic systems that are not conventional
  • How septic tanks function
  • Signs that you need to upgrade your system
  • How to employ a professional

Alternative septic systems

Alternative techniques are particularly effective on steep locations, highly rocky land, or poor soil. Among the options available are aerobic septic systems, mound septic systems, raised-bed septic systems, and others. The cost of a septic system installation or replacement may be greater or cheaper than the average depending on the area and kind of system. Locate the most qualified septic system consultant for your project needs. Zip code must be entered correctly.

Signs you need a new system

Anyone would not want sewage water rising up through their front yard on one of the hottest days of the summer season (or even on the coldest day of winter). Waterborne pathogens such as protozoa, bacteria (such as E. coli), and viruses may be spread through fecal matter, making wastewater not just stinking and disgusting, but also potentially deadly. It is possible for unclean wastewater to drain through the soil and pollute the water you and your friends and neighbors drink if your septic system is leaky, overwhelmed, or otherwise compromised.

Knowing what indicators to look for might help you catch an issue before it becomes a major problem.

This includes having your septic tank pumped out by a professional every three to five years.

Other indicators may indicate that it is necessary to contact a septic system specialist as soon as possible to either repair or replace the system.

How much is a 500 gallon septic tank?

Septic Tanks Made of Plastic

Name Capacity Price
500 Gallon1 CompartmentSeptic Tank 500 Gallons $675.99
750Gallon Septic Tank- 1 Compartment / 1 Manhole 750Gallons $948.99
750Gallon2 Compartment NexGenSeptic Tank(IAPMO) 750Gallons $978.99
750Gallon Septic Tank- 1 Compartment / 2 Manholes 750Gallons $948.99

Sizes of concrete septic tanks, number of bedrooms, cost, and dimensions

Septic Tank Size Bedroom Count Supported in New Hampshire Average Retail Cost
1250 – 350 Gallon Mono 5 $1750
1250 – 500 Gallon 6 $1785
1500 – 500 Gallon Mono 6 or 7 $2320
1600 – 400 Gallon 6 or 7 $2125

In the same vein, how large is a 500-gallon septic tank? Package with a 500 gallon siphon tank Overall Height: 56″ Overall Length: 79″ Overall Width: 48″ Height to center line of inlet: 48″ Overall Height to center line of inlet: 56″ Furthermore, how long does a 500-gallon septic tank have a useful life?

Table I. Septic Tank Pumping Frequency in Years
Septic Tank Size Gallons / Liters Household size – Number of Occupants
Septic Tank Pumping Frequency in Years
500 gallons * / 1890 liters 5.8 1.5
750 * / 2840 9.1 2.6

Do you know how often you should pump your 1,000 gallon septic tank?

If a 1,000 gallon septic tank is utilized by two people, it should be pumped every 5.9 years, according to EPA guidelines. If thereareeight individuals utilizing a1,000 – gallon septic tank, itshouldbepumpedevery year.

Learn how much it costs to Install a Septic Tank.

Septic tanks range in price from $3,157 to $10,367, or an average of $6,739 per tank. Installation of a conventional 1,000-gallon tank for a three-bedroom home might cost anywhere from $2,100 and $5,000. Materials range in price from $600 to $2,500, without labor. A comprehensive septic system, which includes a leach field (also known as a drain field), tank, and plumbing, can cost between $10,000 and $25,000 to install. A leach field installation might cost anywhere from $5,000 to $20,000, depending on the kind.

In the end, the cost of installing a septic tank is determined by the kind of system, the materials used, and the size of the tank.

This course will teach you about the several sorts of settings, such as conventional, drip irrigation, mound irrigation, evapotranspiration, recirculating sand, constructed wetland, and chambered irrigation.

Septic System Cost Estimator

Let’s run some numbers to see what the costs are. What part of the world are you in? What part of the world are you in?

National Average $6,739
Typical Range $3,157 – $10,367
Low End – High End $450 – $20,000

The cost information in this report is based on real project costs provided by 942 HomeAdvisor customers.

New Septic System Cost

Data on real project costs reported by 942 HomeAdvisor members is used to get this estimate.

  • The cost information in this report is based on real project costs provided by 942 HomeAdvisor members.

Optional components include the following:

  • Some types of systems use a dose or pump tank, which pumps wastewater up into mounded or elevated leach fields and recycles the water in some cases. Pump for aeration: If your aquarium is equipped with an aerobic system, you’ll want an aerator to force oxygen into the tank.
Find Local Septic Tank Installers

The installation of a traditional anaerobic system typically costs between $3,000 and $8,000 on average. Anaerobic systems are often less expensive to build than aerobic systems, which are more complicated. However, because they are less effective at cleaning the tank, you will need a bigger leach field to accommodate the increased burden. An anaerobic septic system is a very basic system that consists of a pipe that runs from the home to the tank and a branching pipe that runs from the tank to the drain field, among other components.

See also:  Septic Tank Pumping How Often? (Solved)

Aerobic Septic System Cost

Aerobic systems, which are those that require oxygen to work properly, cost on average between $10,000 and $20,000 per system. If you’re moving from anaerobic to aerobic fermentation, you’ll almost certainly need a second tank, but the conversion will only cost you $5,000 to $10,000. Aerobic systems break down waste more effectively in the tank than anaerobic systems, allowing you to use a smaller drain field in many cases – which is ideal for houses with limited space. An aerobic wastewater system is a wastewater system that depends on aerobic bacteria (bacteria that thrive in the presence of oxygen) to break down trash in the tank.

You’ll need an aerator as well as an electrical circuit that connects to the system to complete the setup. Small, mounded, or speciality fields may necessitate the addition of a dose or pump tank to assist in pushing effluent (sewage or wastewater) upward or out in batches.

Get Quotes From Local Septic Tank Pros

Beyond the tank and leach field, there will be a few more costs to consider when creating your budget for the project. You may already have some of these costs included in your total project pricing, so make sure to get line-item prices on your estimate.

  • Excavation costs $1,200–$4,500
  • Building permits cost $400–$2,000
  • And a perc test costs $700–$1,300. Labor costs range from $1,500 to $4,000
  • The cost of septic tank material ranges between $500 and $2,000.
  • Plastic and polymer materials cost $500–$2,500
  • Concrete costs $700–$2,000
  • And fiberglass costs $1,200–$2,000.
  • Materials such as plastic and polyethylene cost $500 to $2,500
  • Concrete costs $700 to $2,000
  • And fiberglass costs $1,200 to $2,000
  • Etc.

Leach Field Cost

Installing a leach or drain field, which is a component of your septic system, can cost anywhere from $3,000 to $15,000 in total. The cost of a typical drain field ranges from $2,000 to $10,000. The drain field, also known as the leach field, is the component of the septic system that is responsible for returning wastewater to the soil. Most of the time, a flooded area in the yard or a strong stink of sewage on the property is the first symptom of a problem with the drainfield. It is possible that you may require further treatment for blocked or flooded fields, which would increase the cost of the drain field repair from $10,000 to $50,000.

Alternative Septic Systems Cost

When you have a tiny property, a high water table, high bedrock, poor soil, or just wish to utilize less space, an alternate septic system is a good choice.

Mound Septic System Cost

Installing a mound septic system can cost between $10,000 and $20,000 dollars. In places with high water tables, thin soil depths, or shallow bedrock, this is the most costly system to build; yet, it is frequently required. In order to create a drain field, it uses a raised mound of sand rather than digging into the soil. Its extra cost is a result of both the additional technology required to pump sewage upward into the mound and the materials and labor required to construct the mound in the first place.

Recirculating Sand Filter Septic System Cost

Sand filter septic systems range in price from $7,500 to $18,500. They can be built above or below ground depending on the situation. In order to disperse the wastewater in the ground, they employ a pump chamber to force the wastewater through a sand filter. The liner of the filter box is normally made of PVC. This is accomplished by pumping the effluent through the sand and returning it to the pump tank, where it is then disseminated throughout the ground.

Drip Septic System Cost

Drip systems range in price from $8,000 to $18,000, depending on the size and complexity. They operate in the same way as previous systems, with the exception that they employ extensive drip tubing and a dosage mechanism. They deliver lower dosages over a shorter period of time, which is particularly effective at shallow soil depths. This method is more expensive than a standard system since it requires a dosage tank, a pump, and electrical power to operate.

Evapotranspiration System

Evapotranspiration systems range in price from $10,000 to $15,000 per system. In order to allow the liquid to evaporate from the top of an open-air tank, they employ a novel drain field configuration. They’re only usable in dry, arid areas with little rain or snow, thus they’re not recommended.

Built Wetland System

Built-in wetland systems range in price from $8,000 to $15,000, with the cost increasing if an aerobic tank is included. They are designed to simulate the natural cleaning process observed in wetland ecosystems.

After traveling through a wetland tank, where it is treated by microorganisms, plants, and bacteria, it is returned to the soil. The waste also has the effect of assisting the growth of wetland plants and the population of microbes.

Chambered System

Installation of chambered systems ranges from $5,000 to $12,000 dollars. They employ plastic perforated chambers surrounding pipes, which are frequently laid in sand, to keep them cool. Gravel is no longer required as a result of this. They are quick and simple to install, but they are more subject to crushing pressures, such as those caused by automobiles.

Septic Tank Replacement Cost

The cost of replacing a septic tank ranges from $3,000 to $10,000. From 30 to 40 years, you may anticipate your system to serve you well. The system may crack or corrode as a result of the failure and the resulting contamination of groundwater with toxic waste is an issue. When this occurs, the well water may get polluted, the yard may become marshy, and the septic system may become inoperable or fail completely. Here’s a breakdown of the various components of a septic tank, along with an estimate of their usual costs: Replacement of a septic tank pump costs between $800 and $1,400.

Replacement of the filter costs between $230 and $280.

Drain Field Replacement Cost: $7,500.

Septic System Maintenance Costs

It is essential that you pump and clean your septic tank at least once a year. In addition, you should get it examined at least once every three years. The proper maintenance of your septic tank will save you money in the long term, and it will also help you avoid potentially hazardous situations. The Environmental Protection Agency (EPA) suggests the following steps to keep your septic system in good working order:

Inspect and Pump Your Septic Frequently

Typically, the cost of septic tank pumping runs from $300 to $550, or around $0.30 per gallon – most septic tanks have capacities between 600 and 2,000 gallons. Every three to five years, you should have your septic tank inspected and pumped by a professional. If you have a bigger home (with more than three bedrooms) and you tend to use a lot of water, you should try to get it pumped at least once every three years. An checkup of a septic system might cost anything from $100 to $900. Your septic inspector will do a visual inspection of the system.

  • Initial inspection costs between $250 and $500
  • Annual inspection costs between $100 and $150
  • And camera inspection costs between $250 and $900.

Use Household Water Efficiently

A toilet that leaks or runs continuously might waste as much as 200 gallons of water per day, although the average family consumes just 70 gallons of water. Take, for example, high-efficiency toilets, which consume 1.6 gallons or less of water every flush or less. The use of new, high-efficiency washing machines and showerheads can also help to reduce water waste, which will relieve the load on your septic system.

Properly Dispose of Your Waste

Every day, a leaking or running toilet can waste up to 200 gallons of water, when the average family consumes only 70 gallons of water.

Take, for example, high-efficiency toilets, which consume 1.6 gallons or less of water every flush and are more environmentally friendly. Cleaning machines and showerheads that are more water-efficient can help reduce water waste, reducing the stress on your septic system.

  • Cooking grease or oil, baby wipes or wet wipes, dental floss, diapers, feminine hygiene products, cigarettes, cat litter, and paper towels are all examples of items that fall into this category.

Maintain Your Drainfield

The drainfield of your septic system is a component of the system that eliminates waste from the septic’s liquid. You should take steps to keep it in good condition, such as:

  • Never park or drive your vehicle on your drainfield. Don’t ever put trees near your drainage system. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage equipment
Get in Touch With Septic Tank Installers Near You

Keep your drainfield free of vehicles and parking; No trees should be planted near your drainfield. Maintaining a safe distance between your drainfield and roof drains, sump pumps, and other drainage equipment.

Concrete Septic Tank Cost

Concrete tanks range in price from $700 to $2,000. The total cost of installation ranges from $2,300 to $6,500. They’re one of the most often seen forms of installation. Despite the fact that they are vulnerable to cracking and separation, they are often resilient for several decades. It’s critical to have it carefully inspected on a regular basis for cracks and runoff, among other things. Inspections and frequent cleanings will assist to extend its useful life. Your professional can tell you how frequently you should get it inspected, but it’s normally every one to three years.

Plastic and Poly Septic Tank Prices

Septic tanks made of plastic range in price from $500 to $2,500 on average, not counting installation costs. Plastic is a long-lasting, lightweight, and reasonably priced building material. They do not break as easily as concrete and do not rust. Because of their small weight, plastics are more susceptible to harm during the installation process.

Fiberglass Septic Tank Prices

Fiberglass septic tanks are typically priced between $1,200 and $2,000, not including installation. Fiberglass does not split or rust readily, but it is prone to damage during the installation process, much like plastic. However, because of its lighter weight, it is more prone to structural damage, and the tanks themselves can move in the soil.

Steel

Average costs for fiberglass septic tanks range from $1,200 to $2,000, excluding installation costs. It does not shatter or corrode readily, but it is prone to harm during installation, much as plastic is during transport and storage. As a result of its lighter weight and greater vulnerability to structural damage, the tanks themselves can move in the soil underneath them.

Labor Costs to Install a Septic System

The cost of labor accounts for 50 percent to 70 percent of your overall expenses. Labor is typically more expensive than the tank itself in a normal installation, making it the most expensive option. For example, while the size required for a 3 to 4-bedroom home may cost between $600 and $1,100, the labor to install it might cost anywhere between $1,500 and $4,000.

Compare Quotes From Local Pros

Here is a breakdown of how much septic tanks cost in different parts of the country. Massachusetts:$9,700 California:$4,500 Florida:$5,300 Texas:$8,000 $5,600 in New York City Colorado:$7,800 Idaho:$10,000

DIY vs. Hire a Septic System Pro

The installation of a septic system is a time-consuming operation. An incorrectly fitted unit can result in water contamination, structural damage to the property, and the need for costly repairs.

In addition, an unpermitted installation might make it harder to sell and insure a property when it is completed. Make a point of interviewing at least three pros before making a final decision. Contact a septic tank installation in your area now for a free quote on your job.

FAQs

A septic tank has an average lifespan of 20 to 30 years, however it may live anywhere from 14 to 40 years, depending on the following factors:

  • What it is made of is a mystery. Concrete tends to require more care, but commercial-grade fiberglass and plastic are known to survive for decades in most environments. It’s amazing how well you’ve kept it up. Every one to three years, have your system inspected and pumped out
  • Every three to five years, have it pumped out. It will depend on whether or not it gets vehicle traffic over the leach field. Driving over the leach field compresses it, which increases the likelihood of it failing. The soil’s chemical makeup is important. The length of time it may endure varies depending on the soil type and depth.
See also:  What Happens When Septic Tank Is Full? (Question)

What are the signs I need a new septic tank?

There are a few indicators that it is time to replace your septic tank. These are some examples: If you smell sewage, you may have a solid waste problem in your septic tank that has to be dealt with immediately. Standing water: If there is no clear explanation for standing water, such as a significant rainstorm, it is possible that you have an oversaturated drain field, a damaged pipe, or a faulty septic system. A clogged septic tank will cause pipes to drain more slowly than they would otherwise be.

Construction on your home or the addition of more occupants will have an impact on your septic system.

pollution of nearby water: A septic tank leak can result in wastewater contamination, which can deposit nitrate, nitrite, or coliform bacteria in water sources around your property as a result of the leak.

Old age: If your septic system has reached the end of its useful life, it is time to replace it.

Does homeowners insurance cover septic systems?

Many unforeseen and abrupt repairs to septic tanks are covered by homeowners’ insurance policies. They do not, however, often cover harm caused by a failure to perform routine maintenance. Make certain that you are pumping and cleaning it on a yearly basis.

How much do septic system repairs cost?

Repairing a septic system can cost anything from $600 to $3,000. Most tank repairs and replacement parts cost less than $1500 for each type of repair or replacement part mentioned below. Leach fields range in price from $2,000 to $20,000.

  • Tank Pumps cost between $800 and $1,500. A septic tank that is placed below the drain field may necessitate the installation of a pump to transport wastewater to the drain field. Pumping costs between $300 and $600 per year. Pumping is required to remove solid waste from even a perfectly functioning system every two or three years, even if it is in good working order. Tank Lids cost between $100 and $300 to purchase and install. If you purchase the lid and attach it yourself, it will cost you between $50 and $150
  • Tank Lid Risers range in price from $300 to $1,000. Deeply submerged tanks can have their lids raised to the surface by using these devices.
Still Have Questions About Septic Tanks?

WeDoNotDeliver and WeDoNotInstall services.

Aerobic Septics
1000 GPD Jet Aerobic Septic Tank Package (2 x 500 Gal) $6,721.00
500 GPD Jet Aerobic Septic Tank Package $4,758.00
500 Gallon Jet Aerobic Pump Tank $425.00
Jet Aerator Tank Lids $50.00
Jet Aerator Tank Risers $50.00
Jet Aerobic Riser Lids $50.00
Septics
1000 Gallon Septic Tank (No Divider) $750.00
500 Gallon Round Septic Tank (Low/Low Holes) $395.00
500 Gallon Round Septic Tank (High/Low Holes) $395.00
500 Gallon Square Septic Tank (Low Profile) $600.00
500 Gallon Pump or Septic Tank w/Plastic Riser $510.00
300 Gallon Square Septic Tank $350.00
Other
Concrete Risers $50.00
Water Well Risers (Includes Lid) $110.00
Poly Risers $50.00
Poly Riser Lids $50.00
Black Poly Riser 18″ Diameter ($25 Per Foot) $25.00
Clean-Out Covers w/handle Square (14″ x 3.5″) $50.00
Flat Tank Lids / Stepping Stones $50.00
Sprinkler Head Covers $40.00
Manhole Grade Rings $40.00
Well Service Round Pads $65.00
Parking Barriers $50.00
Round Concrete Lids (64″) $195.00
Round Concrete Lids (68″) $195.00
A/C Pads (3′ x 3′) $60.00
Roll of Ramneck $7.00
Box of Ramneck $55.00

Prices were last updated on November 12, 2020. It is possible that prices and product availability will change, and that this will not be reflected on this website.

How Much Do Septic Tanks Cost?

As an alternative to hooking up your home to a municipal sewer system, you may install a septic system on your own, which is composed of a container placed underground on your land that retains and processes the water and waste that escapes your home through plumbing pipes. Septic tanks should only be installed by qualified specialists, whether you’re building a new house and need a septic system installed or replacing an existing septic system. Because of the project’s intricacy and magnitude, heavy machinery, precise excavating, and plumbing hookups are required, all of which might be devastating if not completed correctly.

  1. Properties in areas where the earth floods often, for example, would experience a high frequency of septic issues.
  2. After that, a contractor must excavate in the vicinity of the tank and drain field in preparation for installation, which will involve plumbing connections to the residence.
  3. Septic system installation needs meticulous design, the knowledge of a professional, and at the very least a few thousand dollars to be completed properly.
  4. What Is the Average Cost of a Septic Tank?
  5. It is possible that you have already attempted to repair your septic tank or system, therefore this fee will be in addition to your original investment.
  6. Glenn Gallas, vice president of operations at Mr.
  7. It is possible that you will spend even more depending on the size and location of your property, as well as the size and substance of your tank and the type of septic system you want.

A septic tank can be constructed from four different types of materials: —Concrete.

—Plastic.

—Fiberglass.

—Steel.

Steel is the least popular building material on the market today.

One thousand gallon tank for a three-bedroom house with less than 2,500 square feet.

Septic tanks under 1,000 gallons in capacity are expected to cost between $600 and $1,000, according to HomeAdvisor, while tanks of 1,200 gallons or above in capacity are expected to cost between $1,200 and $1,600, according to the same source.

Septic tank installation will be delayed if there is a lot of rain that soaks the soil, according to Michael DeCosta, director of branch operations for mergers and acquisitions at Wind River Environmental, a mechanical systems contracting company that installs and repairs septic tanks, among other specialties.

  1. “If you go to Florida or Cape Cod, where there’s a lot of sand, such installations take a day,” adds DeCosta, who is headquartered in the Boston region.
  2. When it comes to designing a septic system, DeCosta explains that in many cases the local planning agency or board of health will provide a list of qualified engineers from which to pick.
  3. The blueprints may then be sent to multiple septic installers for price and assistance, DeCosta explains.
  4. The overall cost of your septic system installation varies depending on the size of your home, the size of your land, the proximity to a floodplain, the soil, the type of tank material you select, and a variety of other factors.
  5. If you’re planning to replace any element of your present septic system, a septic installation specialist will most likely want to come out to your site to take measurements and search for problems before proceeding.
  6. Multiple professional visits for estimates may appear to be excessive, but the information you acquire from each interaction may help you determine which firm offers the best materials and timing for your project, rather than simply choosing the lowest price.
  7. Listed below are a few of the components that contribute to the overall cost of a septic system installation or the cost of replacing an existing tank: • Sewer line • Distribution box • Field lines • Sewer line — Drainage field, also known as a leach field.

– The tank’s lid.

— Tank top.

In the event that only one or two components of the system appear to be causing the problem, Gallas says that the sewage line, septic tank, distribution box, and field lines can all be replaced independently.

Maintenance, on the other hand, is essential since little faults can accumulate over time and generate greater ones.

Depending on the expert, a septic tank should only need to be drained every three to five years.

If you discover a problem with your plumbing or observe water backing up into your house, call a plumber to come out and analyze the problem for you.

According to HomeAdvisor, a plumber’s hourly rate typically ranges from $45 and $200, depending on where you reside in the country.

More from the news organization U.S. News & World Report What Is That Strange Smell in My Home? 15 Mudroom Design Ideas for Your Residence Choose Energy-Efficient Windows for Your Home Using This Guide What Is the Average Cost of a Septic Tank? The article first published on usnews.com.

More from WTOP

What is the cost of a 500-gallon septic tank? Is a septic tank with a capacity of 500 gallons sufficient? The restrictions differ from place to location, but in most cases, a minimum capacity of 1000 gallons is permitted. Generally speaking, the tank should be at least 400 gallons larger than the amount of water that will be stored in it at any given time. For example, if your daily water use is 500 gallons, your septic tank should have a capacity of 900 gallons. In pounds, how much does an empty 500-gallon plastic septic tank weigh?

The size and weight of the tank will also differ depending on whether it is intended for personal and residential usage or for commercial use.

Ignoring the need to pump your tank might have serious ramifications.

It is certain that the sediments will reach the pipe that feeds into the drain field, resulting in a blockage.

How much is a 500 gallon septic tank? – Related Questions

When it comes to the price of a 500-gallon septic tank, Is a septic tank with a capacity of 500 gallons adequate? They vary from location to location, but in most cases, a minimum capacity of 1000 gallons is acceptable. It is recommended that the tank be at least 400 gallons larger than the amount of water that will be stored in it. Example: If your daily water use is 500 gallons, your septic tank should have a volume of at least 900 gallon. What is the weight of a 500-gallon plastic septic tank?

Depending on whether the tank is intended for personal and residential usage or for commercial use, the size and weight of the tank will also differ.

Ignoring the need to pump your tank has consequences.

It is certain that the sediments will reach the conduit that feeds into the drain field and block it.

Which is better concrete or plastic septic tank?

What is the cost of a 500 gallon septic tank? Is a 500-gallon septic tank sufficient? These regulations differ from place to location, but in most cases, a minimum capacity of 1000 gallons is permitted. It is recommended that the tank be at least 400 gallons larger than the amount of water it will hold. For example, if your daily water use is 500 gallons, your septic tank capacity should be 900 gallons. What is the weight of a 500 gallon plastic septic tank? Plastic sewage tanks typically weigh between 80 and 500 pounds, fiberglass septic tanks average between 300 and 500 pounds, and precast concrete septic tanks can weigh upwards of 8,000 pounds or more.

What happens if you don’t pump out your septic tank on a regular basis?

If the tank is not pumped regularly, sediments will accumulate in the tank, reducing the tank’s capacity to store water. It is certain that the sediments will reach the conduit that feeds into the drain field, clogging it. Sewage backup into the home.

How far should a septic tank be from a house?

Requirements differ from one location to the next, although the standard minimum distance from the home is 10 feet in most cases. In the case of a private well for drinking water, however, keep in mind that many state departments of health demand a minimum distance of 50 feet between a new septic tank and a well, according to the American Public Power Association (APEC Water).

What is the smallest septic tank you can buy?

The requirements vary from one location to another, but the standard minimum distance from the home is ten feet in most instances. It’s important to know that many state departments of health mandate a minimum distance of 50 feet between a new septic tank and a well, according to APEC Water, if you’re planning on utilizing a private well for drinking water.

How big should a septic tank be for a 3 bedroom house?

The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size.

What is the largest septic tank size?

The typical size of a home septic tank is from 750 gallons to 1,250 gallons in capacity. A septic tank is a self-contained container that is meant to retain wastewater generated by a home. The system is made up of two major components: the tank and the drain, often known as the soil absorption field or drain field.

How heavy is a 1000 gallon concrete septic tank?

The typical size of a household septic tank is between 750 and 1,250 gallons in volume. Typically, a septic tank is a self-contained container that is used to store wastewater from a house or other building. The tank and the drain, also known as the soil absorption field, are the two primary components of the system.

See also:  When Does Septic Tank Need To Be Pumped? (Solution)

How do I clean my septic tank naturally?

To naturally clean your septic tank, combine 2 teaspoons of lemon or lemon essence, 14 cup of baking soda, and 12 cup of vinegar in a mixing bowl. If you flush the solution down the drains or use it to clean your plumbing fixtures, it will eventually reach the tank and kill the bacteria.

Can I shower if my septic tank is full?

In a suitable system, just the water would be discharged into the leach field unless you ran too much water at too rapid a rate. The best course of action is to discharge your shower water outdoors into a separate drain area, however this may not be permitted where you are. Previously, this system was referred to as a gray water system.

Does RIDX really work?

According to the Environmental Protection Agency and the Ohio Department of Health, not only are additives such as Rid-X not advised, but they also have a negative and potentially harmful effect on the waste treatment process of your septic system, according to the EPA.

How long does a septic tank last?

The typical life expectancy of a septic tank is 15 to 20 years. An average septic tank should last between 15 and 40 years, depending on how well it is maintained.

How often does a 2000 gallon holding tank need to be pumped?

What is the recommended frequency of pumping my holding tank? It is possible that a holding tank will require pumping every 30 to 90 days, depending on the amount of waste created and the size of the tank.

What can I use instead of a septic tank?

Mound, aerobic septic, and cesspool systems are the most common alternatives to septic tanks, but there are also sander filters, artificial wetlands, and drip irrigation systems to consider.

The mound technique is most commonly used for soil that is too shallow over bedrock or for a water table that is too high, according to experts.

What is the best septic tank you can buy?

A precast concrete septic tank is the most suitable option. Precast septic tanks provide several advantages over other types of tanks, such as plastic, steel, or fiberglass. Because of this, concrete septic tanks are required in a large number of cities and municipalities.

What is the lifespan of a concrete septic tank?

According to Inspectapedia, steel tank baffles will rust out in 15 to 20 years and may collapse if driven over, however a concrete tank would survive 40 years or more provided the wastewater is not acidic, according to the company. It’s also crucial to think about how long a drain field will last until it’s replaced.

Where should a septic tank be placed?

A septic tank should be installed on flat ground wherever possible. If at all feasible, the tank should be sited on high ground to minimize flooding and seepage of water. It will be critical for you to glance about and avoid steep slopes or locations with extensive tree roots, which might cause harm to your complete system if not avoided.

Does vinegar hurt a septic system?

In contrast to popular belief, baking soda and other basic home remedies such as vinegar are not detrimental to your septic system. Chemcials that are harsh on the environment, such as bleach and ammonia, might harm the beneficial microorganisms in your sewage tank and should not be used in septic tank treatment.

How do you break down the sludge in a septic tank?

One method is to infuse air into the tank in order to try to mix the contents and break down the solids as much as possible. The more usual approach is to utilize a mechanical mixer that works in a similar way to a baking mixer, in which the components are combined until they create a slurry that can be extracted by the vacuum pump once it has been mixed.

How much does it cost to install a small septic tank?

Although this is true, it is estimated that the cost of providing and constructing an entry-level residential septic tank will be between $10,000 and $12,000 on a conservative basis. Preparation, design, and implementation of an absorption trench system, via which wastewater may be properly discharged, should also be included in the installation.

How big of a drain field do I need?

According to the number of bedrooms and soil qualities, the drainfield is measured in square feet, and its size is reported in square feet. A three-bedroom house with a mid-range percolation rate of 25 minutes per inch, for example, requires a minimum of 750 square feet in order to function properly.

How deep should a septic tank be?

Most septic tanks are rectangular in design, with a footprint of around 5 feet by 8 feet. The majority of the time, septic tank components, including the lid, are placed between 4 inches and 4 feet beneath the surface of the earth.

How Much Does a New Septic System Cost?

If you are relocating to an area that is not serviced by municipal sewer systems, you will be required to install a septic system on your property. Septic systems are comprised of three components: a leach field, an exhaust fume pipe, and the tank itself. In order to absorb the liquids that are pumped out of the septic tank, the leach field is constructed. The exhaust pipe allows gases to escape from the tank that have been produced by bacteria in the tank (which are breaking down the enzymes).

Everything else is left in the tank and will be drained out once it has reached capacity. Tanks are available in a variety of materials, including steel, plastic composite, and concrete, and are available in capacities ranging from 500 gallons to 2500 gallons.

Average Septic Tank Costs

The process of installing a septic system is time-consuming and expensive. Installing a system incorrectly may result in a slew of difficulties and expensive repair fees down the road, so hire a reliable provider that will perform the job right the first time. You may save thousands of dollars in the long run by spending a bit more money up front to ensure that a task is done correctly. Septic system installation costs can occasionally exceed 50% of the entire system cost due to the excavation of a site for the septic system, leech field, and all plumbing lines.

The majority of septic tanks range in price from $400 to $2,000, depending on the type of material used and the size of the tank.

According on the distance between your house and your septic tank, PVC pipe for the leech field and between your house and your septic tank might cost as much as $200 to install.

Other fees that may be incurred include:

  • If the tree or roots interfere with the design of the septic system, tree and root removal may cost more than $1,000. Permits can cost up to $1,500 depending on the size of the land being disturbed and how much of it is damaged. Re-sodding the area after the septic system has been constructed may cost several hundred dollars
  • This is not uncommon.

Septic System Repair

If the tree or roots conflict with the design of the septic system, the cost of tree and root removal might exceed $1,000. It is possible that permits will cost upwards of $1500 depending on the size and extent of the disturbance. Re-sodding the area after the septic system has been constructed may cost several hundred dollars.

Use Our Free Service and Find Septic System Companies Near You

Probably one of the last things on your mind when you are constructing a new house is the location of your septic system. After all, shopping for tanks isn’t nearly as entertaining as shopping for cabinetry, appliances, and floor coverings. Although you would never brag about it, your guests will be aware if you do not have the proper septic tank placed in your home or business.

septic tanks for new home construction

The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size. Of course, all of this is dependent on the number of people who live in the house as well as the amount of water and waste that will be disposed of through the plumbing system.

For the most accurate assessment of your septic tank needs, you should speak with an experienced and trustworthy sewer business representative. They can assist you in planning the intricacies of your septic system, including which sort of septic system will be most beneficial to you.

planning your drainfield

Here are some helpful hints for deciding where to locate your drainfield when you’re designing it.

  • Vehicles should not be allowed on or around the drainfield. Planting trees or anything else with deep roots along the bed of the drain field is not recommended. The roots jam the pipes on a regular basis. Downspouts and sump pumps should not be discharged into the septic system. Do not tamper with or change natural drainage features without first researching and evaluating the consequences of your actions on the drainage field. Do not construct extensions on top of the drain field or cover it with concrete, asphalt, or other materials. Create easy access to your septic tank cover by placing it near the entrance. Easy maintenance and inspection are made possible as a result. To aid with evaporation and erosion prevention, plant grass in the area.

a home addition may mean a new septic tank

Do not make any big additions or renovations to your house or company until you have had the size of your septic system assessed. If you want to build a house addition that is more than 10% of your total floor space, increases the number of rooms, or necessitates the installation of new plumbing, you will almost certainly need to expand your septic tank.

  • For a home addition that will result in increased use of your septic system, your local health department will require a letter from you that has been signed and authorized by a representative of your local health department confirming that your new septic system is capable of accommodating the increase in wastewater. It is not recommended that you replace your septic system without the assistance of a certified and competent contractor.

how to maintain your new septic system

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. Septic systems are something we are familiar with from our 40 years of expertise, and we propose the following:

  • Make use of the services of a qualified specialist to develop a maintenance strategy. Make an appointment for an annual examination of your septic system. Utilize the services of an effluent filter to limit the amount of particles that exit the tank, so extending the life of your septic system. Waste items should be disposed of properly, and energy-efficient appliances should be used. Make sure you get your septic system professionally cleaned every 2 to 3 years, or more frequently if necessary, by an experienced and qualified expert
  • If you have any reason to believe that there is an issue with your system, contact a professional. It is far preferable to catch anything early than than pay the price later. Maintain a record of all septic system repairs, inspections, and other activities

common septic questions

Here are some of the most frequently asked questions by our septic customers.

How do I determine the size of my septic tank?

If you have a rectangular tank, multiply the inner height by the length to get the overall height of the tank. In order to find out how many gallons your septic tank contains, divide the number by.1337.1337

How many bedrooms does a 500-gallon septic tank support?

The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size.

How deep in the ground is a septic tank?

Your septic system is normally buried between four inches and four feet underground, depending on the climate.

Leave a Comment

Your email address will not be published. Required fields are marked *