How Big Does My Septic Tank Need To Be? (TOP 5 Tips)

The larger your home, the larger the septic tank you’re going to need. For instance, a house smaller than 1,500 square feet usually requires a 750 to 1,000-gallon tank. On the other hand, a bigger home of approximately 2,500 square feet will need a bigger tank, more than the 1,000-gallon range.

The septic tank size needed is dependent on the volume of water it can hold, which will be drained into the soil absorption field. In many parts of the United States, the minimum septic tank size permitted is 1,000 gallons. Based on the overall water consumption of your household, the recommended septic tank sizes are as follows.

Is a 500 gallon septic tank big enough?

A rule of thumb is the tank should be at least 400 gallons bigger than the amount of water it’ll handle. For example, if your water usage per day is 500 gallons then the septic tank should be 900 gallons.

Is a 1000 gallon septic tank big enough?

Most residential septic tanks range in size from 750 gallons to 1,250 gallons. An average 3-bedroom home, less than 2500 square feet will probably require a 1000 gallon tank. A properly sized septic tank should hold waste for 3-years before needing to be pumped and cleaned.

How often does a 1000 gallon septic tank need to be pumped?

For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.

Can a septic tank be too big?

A septic tank that is too big will not run well without the proper volume of wastewater running through it. If your septic tank is too big for your house, there wouldn’t be sufficient collected liquid required to produce the bacteria, which helps break down the solid waste in the septic tank.

How do I calculate the size of my septic tank?

The formula is length (feet) x width (feet) x 1 foot x 7.5 gallons, which is the volume for 1-foot depth. To find the volume for 1 inch I divide the volume by 12 to give me gallons per inch. For our example this is 5.16 feet x 7.5 feet x 1.0 foot x 7.5 gallons per cubic foot = 290.2 gallons.

How do I calculate the size of my septic drain field?

Drainfield Size

The size of the drainfield is based on the number of bedrooms and soil characteristics, and is given as square feet.
For example, the minimum required for a three bedroom house with a mid range percolation rate of 25 minutes per inch is 750 square feet.

How much does it cost to pump a septic tank?

How much does it cost to pump out a septic tank? The average cost is $300, but can run up to $500, depending on your location. The tank should be pumped out every three to five years.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

Your Drains Are Taking Forever.
Standing Water Over Your Septic Tank.

Bad Smells Coming From Your Yard.
You Hear Gurgling Water.
You Have A Sewage Backup.

How often should you empty your septic tank?

Can a septic tank never be pumped?

What Are the Consequences of Not Pumping Your Tank? If the tank is not pumped, the solids will build up in the tank and the holding capacity of the tank will be diminished. Eventually, the solids will reach the pipe that feeds into the drain field, causing a clog. Waste water backing up into the house.

How do you tell if your septic tank is full?

How to tell your septic tank is full and needs emptying

Pooling water.
Slow drains.
Odours.

An overly healthy lawn.
Sewer backup.
Gurgling Pipes.

Trouble Flushing.

Do I have to replace my septic tank by 2020?

Under the new rules, if you have a specific septic tank that discharges to surface water (river, stream, ditch, etc.) you are required to upgrade or replace your septic tank treatment system to a full sewage treatment plant by 2020, or when you sell a property, if it’s prior to this date.

How often should a septic tank be emptied?

How Often Should I Empty My Septic Tank? To keep your sewage system running correctly, your septic tank needs to be pumped out or desludged every 1 -2 years. It is extremely important to keep your septic tank maintained.

What Size Septic Tank Do I Need

All of these factors have an impact on how effectively your septic tank system functions.

1) The Specific Septic System Type

There are seven different types of septic tank systems, and the size of the tank required will vary depending on the system you choose. The scope of this article does not allow for a comprehensive discussion of each system type and its associated size requirements. We are referring to traditional gravity-fed anaerobic septic systems in this context when we say “system type.” The anaerobic septic system is the most prevalent type of septic system, and it is the one that most people think of when they imagine a septic tank.

The following systems are available: conventional, gravity-fed, anaerobic systems

Above-ground septic systems
Pressure systems
Anaerobic systems

Mound systems
Recirculating sand or gravel filters systems
Bottomless sand filters systems

If your septic tank system is anything other than a traditional, anaerobic system, the instructions in this page may not be applicable in their entirety to your situation.

2) Local Government Regulations

The laws for septic tanks imposed by local governments vary greatly across the United States. In part, this is due to the significantly diverse soil geography and water features that exist from state to state and can even differ by a few miles in some cases. In order to determine the appropriate septic tank size and the best position on the land for installation, it is essential to consult with local government rules first. Take, for example, theWastewater Treatment Standards – Residential Onsite Systemsdocument from the New York State Department of Health, which provides a comprehensive informational overview of codes, rules, and regulations frequently promulgated by governing bodies, as well as common terminology and definitions in the industry.

3) Suitability of the Ground Geology

The subterranean soil type has a significant impact on the efficacy of the system and, consequently, the size of the septic tank. This topic is highly tied to the rules of the local government. In most cases, it is related to the standards and recommendations of a designated authority that regulates septic tank installations, which is typically the department of health. In order to determine whether or not the ground is suitable for a septic tank system, a trained specialist must come out to the prospective installation site and conduct a series of tests.

A perc test will assess whether or not the subterranean soil is capable of handling and filtering septic tank effluent in an appropriate manner.

Whether you are hiring an experienced professional or doing it yourself, it is your obligation to contact your local oversight agency and arrange for perc tests and/or ground area evaluations to be performed.

The findings of the analysis and testing will determine whether or not the chosen site is suitable, as well as whether or not a certain septic tank system or size is required.

4) The Expected Volume of Wastewater

The typical amount of wastewater that will be generated and that the septic tank will be able to manage is the most essential factor in determining the size of the septic tank that is required. In a home with simply a septic system, all wastewater is disposed of in the septic tank unless a separate system for managing greywater is in place to handle the waste. In order to calculate and approximate these values for residential dwellings, business structures, and facilities, extensive study has been carried out.

Starting with a 1000-gallon septic tank for residential usage, the advice is to go from there.

Some experts propose adding an additional 250 gallons of septic tank capacity for each additional bedroom over three bedrooms.

This is frequently the case when considering the situation collectively for the entire household rather than individually.

Minimum Septic Tank Capacity Table

For further information on the minimum septic tank capacity dependent on the number of residential bedrooms, please see the following table:

Number of Bedrooms	Minimum Septic Tank Size	Minimum Liquid Surface Area	Drainfield Size
2 or less	1000 – 1500 Gallons	27 Sq. Ft.	800 – 2500 Sq. Ft.
3	1000 – 2000 Gallons	27 Sq. Ft.	1000 – 2880 Sq. Ft.
4	1250 – 2500 Gallons	34 Sq. Ft.	1200 – 3200 Sq. Ft.
5	1500 – 3000 Gallons	40 Sq. Ft.	1600 – 3400 Sq. Ft.
6	1750 – 3500 Gallons	47 Sq. Ft.	2000 – 3800 Sq. Ft.

Take note of the following in relation to the table above:

As defined by the State of New York, the Minimum Liquid Surface Area is the surface area given for the liquid by the tank’s width and length measurements. The range of Drainfield Sizes is depending on the kind of groundwater present. The State of Michigan provides the above-mentioned drainfield recommendations, which might vary greatly depending on local standards and terrain.

Additional Thought: Can a Septic Tank Be Too Big?

In the absence of consideration for cost, it is reasonable to ask: “Can a septic tank be too large?” The answer is a resounding nay. As long as the septic tank is placed appropriately, it is impossible for a septic tank to be too large; the only thing that can happen is that it is too little. According to the majority of suggestions, constructing a larger-capacity septic tank is frequently the safer and more preferable solution. The following are the reasons behind this:

With a bigger septic tank, you can adapt for changes in household consumption, such as those caused by parties or long-term guests. In the event that your family grows in size or you want to make improvements to your house, such as adding more bedrooms and bathrooms or installing new plumbing fixtures, having a bigger septic tank can save you the expense of installing a new tank.

Takeaways | What Size Septic Tank Do I Need

The septic tank size recommendations offered here are merely that: suggestions. They are built on a foundation of information gathered from government and academic sources. The actual size of the septic tank you require will vary depending on the factors discussed in this article. There is no “one-size-fits-all” solution when it comes to determining the appropriate septic tank size for your property. There is a great deal of variation depending on where you reside. With addition to providing a basic insight into the septic tank and system size that may be most suited to your application, the providedMinimum Septic Tank Capacity Tablecan also assist in cost estimations.

Before beginning any septic tank installation project, check and double-check with the state, city, or local county’s agency that is in charge of septic tanks, soil testing, and permissions.

If you’re searching for a chart of tank sizes, have a look at our page on the many sizes and quantities of septic tanks available.

They are available in both single chamber and double chamber designs. Consider reading this article from Texas A M University, which provides an overview of onsite wastewater treatment systems, for further information on traditional septic systems.

What size of septic tank do I need?

Probably one of the last things on your mind when you are constructing a new house is the location of your septic system. After all, shopping for tanks isn’t nearly as entertaining as shopping for cabinetry, appliances, and floor coverings. Although you would never brag about it, your guests will be aware if you do not have the proper septic tank placed in your home or business.

septic tanks for new home construction

The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size. Of course, all of this is dependent on the number of people who live in the house as well as the amount of water and waste that will be disposed of through the plumbing system.

For the most accurate assessment of your septic tank needs, you should speak with an experienced and trustworthy sewer business representative.

planning your drainfield

Here are some helpful hints for deciding where to locate your drainfield when you’re designing it.

Vehicles should not be allowed on or around the drainfield. Planting trees or anything else with deep roots along the bed of the drain field is not recommended. The roots jam the pipes on a regular basis. Downspouts and sump pumps should not be discharged into the septic system. Do not tamper with or change natural drainage features without first researching and evaluating the consequences of your actions on the drainage field. Do not construct extensions on top of the drain field or cover it with concrete, asphalt, or other materials. Create easy access to your septic tank cover by placing it near the entrance. Easy maintenance and inspection are made possible as a result. To aid with evaporation and erosion prevention, plant grass in the area.

a home addition may mean a new septic tank

Do not make any big additions or renovations to your house or company until you have had the size of your septic system assessed. If you want to build a house addition that is more than 10% of your total floor space, increases the number of rooms, or necessitates the installation of new plumbing, you will almost certainly need to expand your septic tank.

Avoid making large additions or renovations to your house or company until you have the size of your septic system assessed. In the event that you plan to build a house addition that is more than 10% of your total floor space, increases the number of rooms, or neceessitates the installation of new plumbing, you will almost certainly need to upgrade your septic tank.

how to maintain your new septic system

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. Septic systems are something we are familiar with from our 40 years of expertise, and we propose the following:

Make use of the services of a qualified specialist to develop a maintenance strategy. Make an appointment for an annual examination of your septic system. Utilize the services of an effluent filter to limit the amount of particles that exit the tank, so extending the life of your septic system. Waste items should be disposed of properly, and energy-efficient appliances should be used. Make sure you get your septic system professionally cleaned every 2 to 3 years, or more frequently if necessary, by an experienced and qualified expert
If you have any reason to believe that there is an issue with your system, contact a professional. It is far preferable to catch anything early than than pay the price later. Maintain a record of all septic system repairs, inspections, and other activities

common septic questions

Here are some of the most frequently asked questions by our septic customers.

How do I determine the size of my septic tank?

If you have a rectangular tank, multiply the inner height by the length to get the overall height of the tank. In order to find out how many gallons your septic tank contains, divide the number by.1337.1337

How many bedrooms does a 500-gallon septic tank support?

How deep in the ground is a septic tank?

Your septic system is normally buried between four inches and four feet underground, depending on the climate.

How Big of a Septic Tank Do I Need?

The size and kind of tank required for a new septic system are the two most important considerations to make before beginning the installation process. Private sewage disposal is becoming increasingly popular in the United States, with 33 percent of newly constructed residences choosing for on-site wastewater treatment as part of their construction. Septic tank systems, in conjunction with a soil absorption system, or a drain field, are the least costly way of treating residential wastewater currently available on the market.

The typical size of a home septic tank is from 750 gallons to 1,250 gallons in capacity.
The system is made up of two major components: the tank and the drain, often known as the soil absorption field or drain field.

Oil, grease, and soap residue combine to form the scum layer on the surface of the water.
With each filling of the tank, the effluent drains out of the tank and into the drain field, where it is absorbed by the earth.
Septic tanks are commonly utilized in residential construction and can be classified into three categories.

Polyethylene and fiberglass are one-piece products that are significantly lighter than steel.
In order to determine whether or not you need a septic tank system, check with your local building department to see what laws and requirements apply to onsite wastewater treatment.
The square footage of the property, the number of bedrooms, and the number of people who will be living there are all important considerations.

Septic tanks for one and two bedroom homes that are less than 1,500 square feet and 1,000 gallon septic tanks for three bedroom homes that are less than 2,500 square feet are recommended.
The figures listed above are only estimates.
Before acquiring a septic tank system, speak with a professional plumbing contractor who is licensed in your region about the many septic tank alternatives that are available to you.

Get in touch with the Pink Plumber right away if you have any queries or concerns about your septic tank. Image courtesy of Flickr OUR EXPERT PLUMBERS ARE AVAILABLE TO HELP YOU.

What Size Septic Tank Do I Need?

The size and kind of tank required are the two most important considerations when establishing a new septic system. It is becoming increasingly popular in the United States to have onsite wastewater treatment for newly constructed residences; 33 percent of newly constructed homes have this option. It is the least expensive approach available for treating residential wastewater when paired with a soil absorption system or a drain field, which is why septic tank systems are so popular. Septic tank sizes are mostly determined by the size of the house and the number of people that will be residing in the residence.

Introduction to Septic Tanks Typically, a septic tank is a self-contained container that is used to store wastewater from a house or other building.

Solid waste settles to the bottom of the tank after entering it, forming a layer known as the sludge layer as a result of this settling.
This stratum is composed of wastewater, often known as effluent.
Septic tanks are available in a variety of configurations.

Septic tanks made of concrete; septic tanks made of polyethylene/plastic; and septic tanks made of fiberglass.
Polyethylene and fiberglass are one-piece items that are significantly lighter in weight than steel and aluminum.
Obtaining information from your local building department about onsite wastewater treatment laws and requirements prior to acquiring a septic tank system is highly recommended before making any purchases.

The square footage of the property, the number of bedrooms, and the number of people who will be residing there are all important considerations to consider.
Septic tanks for one and two bedroom residences that are less than 1,500 square feet and 1,000 gallon septic tanks for three bedroom homes that are less than 2,500 square feet are required.
Unless otherwise specified, the figures shown above are estimates.

A competent plumbing contractor licensed in your region should be consulted before purchasing a septic tank system to examine the many septic tank alternatives available.

Today is a good day to call the Pink Plumber if you have any questions or concerns about your septic tank. Flickr is the source of the photo. FOR YOUR CONVENIENCE, OUR EXPERTS IN PLUMBING ARE ON HAND.

Why Septic Tank Size Matters

It is your septic tank’s job to collect and treat all of the water that exits your home through your toilets, showers, laundry, and kitchen sinks. For as long as 24 hours, the water may be kept in the tank, which also serves as a separation chamber where solids are removed from liquids in the process. When it comes to separating particles from liquids, the retention time is critical. The presence of bacteria in the tank aids in the breakdown of sediments. The size of the tank has an impact on how successfully the system can separate and break down the waste materials.

Although it might seem logical to believe that a larger tank is preferable, a tank that is too large for your water usage can interfere with the formation of germs.

Calculation by Water Usage

The septic tank is the initial point of contact for all of the water that exits your home through your toilets, showers, laundry, and kitchen sinks. In the tank, the water can be left for up to 24 hours while solids are separated from liquids in a process known as evaporative distillation. For solids separation from liquids, the retention duration is critical. The presence of bacteria in the tank aids in the breakdown of solid matter. The amount of waste that can be separated and broken down depends on the size of the tank.

The assumption that larger is better is logical, but a tank that is too large for your water usage might interfere with the formation of beneficial bacteria.

900 gallon tank for up to 500 gallons per day

1,200 gallon tank for up to 700 gallons per day
1,500 gallon tank for up to 900 gallons per day
Tank holds up to 1,240 gallons per day

Tank capacity is 1,900 gallon.

Calculations By House Size

The number of bedrooms in your home, as well as the square footage of your home, are less precise guides for determining the size of your tank. The maximum number of bedrooms that may be accommodated by a 1,000 gallon septic tank is two. It’s difficult to say due to the fact that water consumption varies depending on your situation. These estimates are based on the assumption that all bedrooms will be occupied, and the anticipated water consumption is based on this assumption. It is impossible to do these calculations if you live alone in a three-bedroom house.

The suggested tank sizes are listed below, according to the number of bedrooms in the house.

Three bedrooms under 2,500 square feet: 1,000 gallon tank
Four bedrooms under 3,500 square feet: 1,200 gallon tank
And five or six bedrooms under 5,500 square feet: 1,500 gallon tank

One or two bedrooms under 1,500 square feet: 750 gallon tank
Three bedrooms under 2,500 square feet: 1,000 gallon tank

Estimated Cost

Similarly to the cost of any other commodities or services, the price might vary significantly based on where you reside and the current market circumstances. Let’s pretend you’re going to install a concrete septic tank for the sake of planning your project. These are by far the most prevalent, and they have a somewhat lengthy life span. The cost of a typical 1,000-gallon septic tank is between $500 and $700 dollars. The cost of upgrading to a 1,250-gallon tank will be at least $100 more. After three to five years, depending on the size of the tank, you could anticipate to have a cleaning job to do.

If you’re debating between two different tank sizes, knowing your financial constraints might assist you make your ultimate selection.

Although your contractor should be able to assist you in sizing your tank, understanding how to roughly determine your size requirements will help you anticipate how much you’ll need and how much you’ll spend on your tank.

How to Calculate Septic Tank Size

Riverside, California 92504-17333 Van Buren Boulevard Call us right now at (951) 780-5922. Every septic system owner should be familiar with the process of calculating the size of their septic tank so that they can plan for how often their tank will need to be pumped to maintain it working at top performance. It is significantly less expensive to do even a little amount of preventative maintenance than it is to install a whole new system. As a result, it is critical to be aware of when your septic tank will require pumping in order to avoid missing a maintenance appointment.

Eventually, if the accumulation of particles in the tank gets too great and sediments begin to flow into the drainfield, the system may become clogged and overburdened to the point where a new drainfield will be required.

Types of Septic Tanks

Septic tanks are commonly utilized in residential construction and can be classified into three categories.

Septic tanks made of concrete

Septic tanks made of polyethylene/plastic
Septic tanks made of fiberglass

Construction of concrete septic tanks is the most popular, but because of their weight, they must be installed with heavy gear. Polyethylene and fiberglass are one-piece products that are significantly lighter than steel. This makes them particularly well suited for isolated and difficult-to-reach locations. In order to determine whether or not you need a septic tank system, check with your local building department to see what laws and requirements apply to onsite wastewater treatment.

Why Choosing the Right Septic Tank Size Matters

sewage can back up into your home if a septic tank is installed that is too small and does not have enough holding capacity. When installing a septic tank, it is critical that you determine the proper size. The majority of towns require even the smallest septic tanks to carry a minimum of 1,000 gallons of wastewater. As the number of bedrooms, occupants, bathrooms, and fixtures that will be serviced by the septic system rises, the needed capacity for the system increases accordingly.

How Much Water Do You Use?

There are a variety of calculations that may be used to calculate the size of the septic tank that is required for your residence. The most precise and dependable method is to measure water consumption. The size of the septic tank that is required is determined by the amount of water that will be handled and then dispersed into the field lines of the property. It should be noted that the minimum capacity tank permitted in many regions of the nation is 1,000 gallons. The average individual consumes 50-100 gallons of water each day.

Try to keep these things in mind when you’re putting together your estimate. Homes with minimal water use will require a reservoir that holds approximately double the amount of gallons used on a daily basis. As your water use increases, the distance between you and the rest of the world narrows.

Calculations by House Size

The number of bedrooms in your home, as well as the square footage of your home, are less precise guides for determining the size of your tank. What is the maximum number of bedrooms you can have with a 1,000 gallon septic tank? It is tough to say due to the fact that water consumption varies depending on your situation. These estimates are based on the assumption that all bedrooms will be occupied, and the anticipated water consumption is based on this assumption. It is impossible to do these calculations if you live alone in a three-bedroom house.

The suggested tank sizes are listed below, according to the number of bedrooms in the house.

Three bedrooms under 2,500 square feet: 1,000 gallon tank
Four bedrooms under 3,500 square feet: 1,200 gallon tank

And five or six bedrooms under 5,500 square feet: 1,500 gallon tank
One or two bedrooms under 1,500 square feet: 750 gallon tank
Three bedrooms under 2,500 square feet: 1,000 gallon tank

Septic Tank Size Affects Pumping Schedule

The size of your septic tank is important because it determines how frequently it has to be pumped in order to stay working at top performance. As a general rule, we recommend that you pump your septic tank every three to five years; however, the smaller the tank, the more frequently it must be pumped. Tanks that are not maintained properly over an extended period of time are more likely to get clogged or fail, necessitating costly repairs or replacement.

Planning Your Drainfield

Here are some helpful hints for deciding where to locate your drainfield when you’re designing it.

Vehicles should not be allowed on or around the drainfield. It is not recommended to put trees or anything else with deep roots along the bed of the drain field since the roots of these plants frequently clog the pipes. Downspouts and sump pumps should not be discharged into the septic system. Do not tamper with or change natural drainage features without first researching and evaluating the consequences of your actions on the drainage field. Do not construct extensions on top of the drain field or cover it with concrete, asphalt, or other materials. Make your septic tank lid as accessible as possible so that maintenance and inspection may be performed without difficulty. To aid with evaporation and erosion prevention, plant grass in the area.

Get Help Choosing the Right Septic Tank Size

Obviously, these figures are just intended to be used as a broad guideline, and the operation of the complete system is contingent on you getting your numbers exactly correct. It is important not to leave anything to chance. Make a phone call to West Coast Sanitation. Our professionals understand that you don’t have time to cope with septic system issues. If you believe that your system has reached its maximum capacity, please contact us immediately to discuss your options. If you have any questions, we have specialists standing by to help you resolve them and get your system back up and running.

undefined

Choosing the appropriate size for your Prior Lake, MN septic tank is one of the most critical questions you should ask yourself while designing your septic system. Choosing the incorrect size might result in a variety of problems down the line, so it is critical to get this component of the project right the first time. Before you purchase and install a septic system, follow the guidelines in this section to establish the size of your tank.

Measure your square footage

The square footage of your property is one of the most significant elements to consider when selecting a septic tank. Houses with one to two bedrooms and fewer than 1,500 square feet, on average, require a modest tank of around 750 gallons of storage space. An average 1,000-gallon water tank is required for homes between 1,500 and 2,500 square feet (which is normally a three-bedroom house). It is quite likely that you will want a 1,250-gallon tank if you have a larger, four-bedroom home that is up to 3,500 square feet in size.

Count your household

How many people will be living in the house and utilizing the septic system at the time of construction? This is the second most important consideration when determining the appropriate septic tank capacity in Prior Lake, Minnesota. Obviously, the size of the septic tank should increase in proportion to the number of people that live in the house. You may need to install a larger tank than would ordinarily be advised for a house of that size if you have three bedrooms but many children in each bedroom.

On the other hand, if you have a four-bedroom home but only two people live in it, you may not require a larger water tank than you would otherwise.

Check the codes

The local building codes must also be taken into consideration, regardless of the type or size of septic tank you believe you require. Materials utilized in system construction, tank size, and position of the drain field are all factors that may be limiting factors for you. Be important to verify all local construction requirements before purchasing or installing a septic tank to ensure that your options are compliant with current building rules before proceeding.

Consult with professionals

When you ask yourself, “How large should my septic tank be?” you should also consider asking that question to an expert in Prior Lake, MN who specializes in septic tanks. It’s always important to get advice from professionals in order to receive the most appropriate recommendation for your particular scenario. Although the guidelines outlined above are basic guidelines, an individual consultation with an aseptic specialist will provide you with the most accurate information to guarantee that you build the most appropriate tank for your property.

Get the job done right

Contact the professionals at Mike’s SepticMcKinley Sewer Services to guarantee that your septic system is precisely suited to your requirements. Tank and system design and installation, as well as repairs, cleaning, pumping, and normal maintenance, are all areas of expertise for our team of highly trained personnel. In addition, we do tank and system compliance checks and system certification. If you have any questions or would want to get started on your custom design and installation, please contact us at 952-440-1800.

Assessing Septic System Sizing For Tank And Drain Field

However, it is a frequent fallacy that the size of the system is governed by the size of the home; however, this is not completely correct. The size of the septic system is normally established by taking into consideration how many bedrooms the house has, or more specifically, how many projected residents there will be and how much water will be used on a daily basis (litres per day). Because everything that goes into a septic system must eventually come out, water consumption is a crucial consideration when sizing a septic system.

The size of a septic system must be determined by ensuring that the septic tank and drain field are both large enough to handle the amount of wastewater created by the residents of the property.

Things to Consider when Sizing a Septic Tank

It is necessary to size a septic tank appropriately so that the retention time — the amount of time that wastewater effluent remains in the tank before being discharged to the drain field — is long enough to allow heavier solid particulates, such as fats and oils, to settle to the bottom of the tank as sludge and lighter solids, such as grease and oils, to float to the top of the tank and join the layer of scum that has formed above it.

The presence of a significant amount of liquid in the tank is required for this method to be successful in order to aid the settling process.

If you have a three-bedroom house or a property with fewer than three bedrooms, you should have at least 850-1000 gallons of storage space in your septic tank (3900 litres).

Septic tank capacity based on the number of bedrooms ” data-image-caption=”Septic Tank Sizing in British Columbia Based on Bedroom Count” data-medium-file=”ssl=1″ data-medium-file=”ssl=1″ data-large-file=” ssl=1″ loading=”lazy” src=”is-pending-load=1 038;ssl=1″ data-large-file=” ssl=1″ loading=”lazy” src=”is-pending-load=1 038;ssl=1″ alt=”septic tank sizing” width=”669″ height=”377″ alt=”septic tank sizing” width=”669″ height=”377″ srcset=”data:image/gif;base64,R0lGODlhAQABAIAAAAAP/yH5BAEAAAAALAAAAAABAAEAAAIBRAA7″ data-recalc-dims=”1″ data-lazy-src=” is-pending-load=1 038;ssl=1″ data-recalc-dims=”1″ data-lazy-src=” is-pending-load=1 However, there are a few extra considerations that should be taken into consideration.

For example, if a trash disposal machine is installed in the kitchen, it is often estimated that the daily flow would rise by at least 50% as a result of the organic waste generated, which must be handled inside the septic system.

It is possible that a grease interceptor will be required.

Although crucial to remember, the septic tank only serves to partially treat waste water; the remainder, as well as liquid effluent disposal, takes place in a drain field, which must be properly designed in order to function properly.

Things to Consider when Sizing a Drain Field

It can be difficult to determine the most appropriate size for a drain field because it must take into account not only the amount of water used by the household and the rate at which it is used, but also the soil characteristics of the site where the drain field will be constructed, as well as the quality of the effluent entering the drain field. It is also possible to create trenches at a shallow depth — in this instance, trenches are partly below ground and partially covered, or “at grade.” As shown, the infiltration surface is at its original grade, and the system has been covered with cover dirt to prevent erosion.

The horizontal basal area ONLY (not including the sidewall area) should be at least equal to the AIS (Daily Design Flow divided by the Hydraulic Loading Rate or HLR).

The area of the trench infiltrative bottom required equals the area of the infiltrative surface (AIS) Hydraulic loading rate divided by daily design flow equals Area of the Infiltrative Surface (AI).

Sizing a Septic Drain Field, Calculation Example

1300L/day daily design flow for a three-bedroom house with a high permeability ratio of 30 L/day/m2 for Loamy Sand (high sand content with a tiny percent of clay) and trenches 0.6 m wide. Trench bottom area is calculated as 1300L/D/m2 x 30L/D/m2 = 43.33 m2. trenches total length = 43.33 0.6 = 72.2 m total trench length We need to know how soon the soil can absorb the wastewater because the soil is responsible for absorbing it. It is known as the percolation rate, which is the rate at which water may be absorbed by the soil.

It is possible for sewage to rise up and pool on the surface of the soil, resulting in an unpleasant and unhealthy environment; however, if the soil percolation rate is too fast, the effluent will not be properly treated before it filters into the groundwater, resulting in an unpleasant and unhealthy environment.

Gravelless systems consisting of a single or many pipes are defined as having an effective trench width equal to the outer diameter of the pipe or pipe bundle.

A more cautious method would be to use the actual exposed interior dimensions width of the chamber at the trench or bed bottom, rather than the nominal interior dimensional width.

Geocomposite systems have an effective trench width defined as the outer dimensions (or outside dimensions plus one) of the bundle(s) in direct contact with the trench or bed foundation (or sand layer, where used).

Trench Dimensions

As a potential system reserve region, the inter-trenching spacing might be taken into consideration. If the trench width is less than 30.5 cm (1′) or larger than 90 cm (3′), the depth should be reduced. For any one lateral in a gravity distribution system, the length of the trench should not be larger than 15 m (50 feet). Gravity systems that are not dosed should preferable employ shorter laterals (less than 50′ in length). Except in the case of pressured shallow narrow drain fields, the spacing between center lines should not be less than 1.8 m (6′) from center line to center line.

GRAVITY TRENCH DISTRIBUTION DESIGN CONSIDERATIONS

There should be no use of gravity flow for distribution areas more than 152 linear metres of trench width 610 mm (500 lineal feet/2 foot wide trench) or for distribution systems greater than 93 m2 (1,000 ft2) infiltrative surface area. Gravity systems that are greater than this should only be built if they are DOSED with water. Ideally, these systems should employ dosing to sequential distribution, pressure manifold distribution, or dose to Distribution Box as their distribution methods (D-Box only for slopes below 15 percent ).

Dosing systems should be planned and constructed in accordance with the specifications in this document (linked standard).

Pump Tank Sizing

The size of the tank is determined by the sort of pumping setup that will be employed. The following sections provide recommendations for chamber selection based on recommended volume guidelines. In a pump tank, the working volume is the space between the tank’s interior bottom and the invert of the input pipe’s invert. As long as the valve and union are accessible above the level of the alarm reserve volume, the depth from the invert of the inlet to the underside of the tank lid could be included in the alarm reserve volume if the pump tank is installed at an appropriate elevation (see worksheet in Appendix P) in relation to the preceding tank (for example, a septic tank).

Design Flow on a daily basis.
Minimum of 50% of Daily Design Flow must be set aside as alarm reserve volume (over and above the alarm float on, up to the maximum allowable effluent level).
Summary: When it comes to septic systems, the kind of system (whether it is a type-1, type-2, or type-3 system) will have an impact on the quality of the effluent that is discharged into the drain field from the tank.
This is because cleaner effluent will require less treatment in the drain field.
The examples above are for conventional type systems, which are the simplest to calculate.
The hydraulic loading rates of both the soils and the wastewater treatment level are used to determine the appropriate size of a septic system.
In order to assess the vertical separation of soils from any restrictive factors and to enter data on hydraulic load rates through percolation testing and soil texturing, there is a significant onus on the contractor to undertake thorough site investigations.

High-volume fixtures and garburators will have an adverse effect on a septic system since they will add significant amounts of organics that will not adequately decompose as well as excessive volumes of water use. As a result, they must be scaled appropriately.

Standard Septic Systems

When it comes to treating residential wastewater, a regular wastewater system combined with a soil absorption system is the most cost-effective technique currently available. However, in order for it to function correctly, you must select the appropriate septic system for your home size and soil type, and you must keep it in good working order on a regular basis.

What size septic tank do I need?

Septic tank size requirements are determined by the number of bedrooms in a house, the number of people who live there, the square footage of a house, and whether or not water-saving gadgets are installed. If you want to obtain a general sense of what size septic tank your home requires, look at the table below.

Bedrooms	Home Square Footage	Tank Capacity
1 or 2	Less than 1,500	750
3	Less than 2,500	1,000
4	Less than 3,500	1,250
5	Less than 4,500	1,250
6	Less than 5,500	1,315

How often should my tank be pumped?

A regular pumping of the tank is required to maintain your system operating properly and treating sewage efficiently. Sludge collects at the bottom of the septic tank as a result of the usage of the septic system. Because of the rise in sludge level, wastewater spends less time in the tank and solids have a greater chance of escaping into the absorption region. If sludge collects for an excessive amount of time, there is no settling and the sewage is directed directly to the soil absorption region, with no treatment.

You can find out how often you should get your tank pumped by looking at the table below.
If you fail to maintain the tank for an extended period of time, you may be forced to replace the soil absorption field.
Solids can enter the field if the tank is not pumped on a regular basis.
Wet soils that have been saturated by rains are incapable of receiving wastewater.

Other maintenance

Another maintenance activity that must be completed on a regular basis to protect the system from backing up is to clean the effluent filter, which is located in the tank’s outflow tee and is responsible for additional wastewater filtration. This filter eliminates extra particulates from the wastewater and prevents them from being clogged in the absorption field, which would cause the absorption field to fail prematurely. You may clean the filter yourself by spraying it with a hose, or you can have your maintenance provider clean the filter for you if necessary.

Two critical components

A septic tank and a soil absorption system are the two primary components of a standard treatment system.

Tank

The septic tank is an enclosed, waterproof container that collects and treats wastewater, separating the particles from the liquid. It is used for primary treatment of wastewater. It works by retaining wastewater in the tank and letting the heavier particles (such as oil and greases) to settle to the bottom of the tank while the floatable solids (such as water and sewage) rise to the surface. The tank should be able to store the wastewater for at least 24 hours in order to provide time for the sediments to settle.

Up to 50% of the particles stored in the tank decompose, with the remainder accumulating as sludge at the tank bottom, which must be cleaned on a regular basis by pumping the tank out.

Drainfield

Ultimately, the soil absorption field is responsible for the final treatment and distribution of wastewater. Traditional systems consist of perforated pipes surrounded by media such as gravel and chipped tires, which are then coated with geo-textile fabric and loamy soil to create a permeable barrier. This method depends mainly on the soil to treat wastewater, where microorganisms assist in the removal of organic debris, sediments, and nutrients that have been left in the water after it has been treated.

As the water moves through the soil, the mat slows its passage and helps to prevent the soil below the mat from being saturated.

The grass that grows on top of the soil absorption system takes use of the nutrients and water to flourish as well.

Septic tank types

There are three primary types of septic tanks used for on-site wastewater treatment: cisterns, septic tanks, and septic tanks with a pump.

Concrete septic tanks are the most popular type of septic tank. Fiberglass tanks – Because they are lightweight and portable, they are frequently used in remote or difficult-to-reach sites. Lightweight polyethylene/plastic tanks, similar to fiberglass tanks, may be transported to “difficult-to-reach” sites since they are one-piece constructions.

It is necessary for all tanks to be waterproof in order to prevent water from entering as well as exiting the system.

Factors in septic maintenance

A critical consideration in the construction of a septic tank is the link between the amount of surface area it has, the amount of sewage it can hold, the amount of wastewater that is discharged, and the rate at which it escapes. All of these factors influence the effectiveness of the tank as well as the quantity of sludge it retains. The bigger the liquid surface area of the tank, the greater the amount of sewage it can hold. As more particles accumulate in the tank, the water level in the tank grows shallower, necessitating a slower discharge rate in order to give the sludge and scum more time to separate from one another.

An aperture must be utilized on the tank lid if it is more than 12 inches below the soil surface, and a riser must be used on the openings in order to bring the lid to within 6 inches of the soil surface.

In most cases, the riser may be extended all the way to the ground surface and covered by a sturdy lid. It is quite simple to do maintenance on the tank thanks to these risers.

Soil types

There are three types of soil textures: sand, silt, and clay, and each has an impact on how quickly wastewater filters into the soil (a property known as hydraulic conductivity) and how large an absorption field is required. Sand transports water more quickly than silt, which transfers water more quickly than clay. According to Texas laws, these three soil textures are subdivided into five soil kinds (Ia, Ib, II, III, IV). Sandy soils are classified as soil type I, whereas clay soils are classified as soil type IV.

The Hydraulic Loading, which is the quantity of effluent applied per square foot of trench surface, is also significant in the design.
For this reason, only nonstandard drain fields are suitable for use in clay soils due to the poor conductivity of clay soils.
The Texas A&M University System’s Agricultural Communications department.
L-5227 was published on April 10, 2000.

Do you need a bigger septic tank size?

When constructing, purchasing, or renting a home, it is critical to understand the appropriate septic tank size for the land being considered. A house with the incorrect septic tank size could put you in a difficult situation if the tank becomes overflowing prematurely. The government may order you to replace your septic tank, which may cost you thousands of dollars if it fails completely. To avoid this, make certain that the septic tank is the appropriate size from the beginning.

Using the number of bedrooms to determine septic tank size

The number of beds on a property must be taken into consideration when deciding the size of the septic tank to be installed on the land, according to the legislation. This is mostly due to the fact that the number of bedrooms will provide a clear indication of the maximum number of people who will be able to occupy the property. Because the septic tank will be the initial point of contact for all of the wastewater from the residence, it is important to choose the appropriate size. The effluent should be allowed to sit in the tank for at least 24 hours before it is discharged into the drainage system.

If this is not done, the solids will flow out of the tank and into the drain field, resulting in a blockage of the drain field and the tank.

Number of bedrooms	Minimum capacity in gallons
1 – 3	750
4	850
5 – 6	1,050 – 1,500

Using water usage to determine the septic tank size

Even after determining the most appropriate septic tank size based on the number of bedrooms in the house, you may choose to take additional aspects into consideration. The water usage rates of two identically sized dwellings might be drastically different. For example, if you plan to use a garburator, the amount of wastewater that will be discharged into the septic tank will increase.

It is possible that you may need to account for high-volume fixtures. The flow rates of some of the most regularly used plumbing fittings, as well as the predicted demand during peak periods, are included in the table below.

USE	FLOW RATE (GALLONS PER MINUTE)	TOTAL USE (GALLONS)
Bathroom sink	2	1-2
Backwash filters	10	100-200 /backwash cycle
Garbage disposer	3	4-6 per day
Dishwasher	2	5/load
Kitchen sink	3	2-4/use
Shower/ tub	5	25-60/use
Toilet flush (pre-1992 design)	3	4-7/use
Toilet flush (high-efficiency design)	3	1.28/use
Washing machine	5	15-30/load

Others factors that determine the size of the septic tank

Aside from the number of pumping chambers in a septic tank, the number of pumping chambers in a septic tank is another factor that may be used to calculate the size of the septic tank in some jurisdictions. For example, a septic tank with an incorporated lift station pumping chamber must have an extra capacity of 250 gallons in addition to the standard capacity. It is also necessary to take into consideration the local weather conditions in the location where the septic tank will be constructed.

In order to accommodate this, the septic tanks in these areas need be larger.

Legal requirements– before building and installing a septic system, it is usually a good idea to check to see if there are any legal standards that must be followed in the process.

In the event that you want to make any improvements to your house, such as the installation of another bedroom, you may want to consider installing a larger septic tank to accommodate the additional space.

Conclusion

Choosing the proper septic tank size will save you a lot of headaches in the long run. As a starting point, you will not be in contravention of any legal requirements that are in effect in your country. Additionally, by constructing the proper septic tank for your property, you can ensure that your septic system will operate properly and without interruptions throughout the year. It will also aid in the extension of the life of your septic system.