One is your county health department. County health departments often maintain records of septic systems. You can also check to see if there is a property survey map available from your municipality or county. A survey map might contain the location of a septic tank.
- Being able to locate your own septic system will save you money when you need your septic system serviced. Contact your local health department for public records. Permits are needed to install a septic system and most health departments will retain a record of these permits.
Are septic tank locations public record?
Contact your local health department for public records. These permits should come with a diagram of the location where the septic system is buried. Depending on the age of your septic system, you may be able to find information regarding the location of your septic system by making a public records request.
Where can I get a diagram of my septic system?
The contractor who designed and installed the septic tank on your property should have filed an as-built diagram at the local health authority. If you have the contact information of the contractor, you can request them for the diagram and then you can use it to locate your septic tank.
How do I find out if my septic tank is registered?
Check if your septic tank is already registered You can check if your tank has already been registered by contacting your environmental regulator. If you are unsure then it is best to check and avoid making an unnecessary payment. The NIEA and SEPA have records of all registered septic tanks.
How do you find a septic tank in an old house?
Look for the 4-inch sewer that exits the crawl space or basement, and locate the same spot outside the home. Septic tanks are usually located between ten to 25 feet away from the home. Insert a thin metal probe into the ground every few feet, until you strike polyethylene, fiberglass or flat concrete.
How do you find a metal detector with a septic tank?
6 Steps to Locate a Septic Tank
- Find Your Main Sewer Drain Line. Sewage from your toilets, sinks, and showers collects into a main drain line.
- Check Permits and Public Records.
- Determine Septic Tank Material.
- Time to Dig.
- Mark the Location for Future Maintenance.
How far down is a leach field?
A typical drainfield trench is 18 to 30 inches in depth, with a maximum soil cover over the disposal field of 36 inches.
Can you walk on a leach field?
Your family can walk on a well-maintained drain field without fear of encountering puddles of affluent and dangerous bacteria. Bicycles and tricycles are also acceptable because they are not heavy enough to compress or disturb the soil.
Can you have a septic tank without a leach field?
The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.
Are septic tanks still legal?
Septic Tanks Explained… Septic tanks cannot discharge to surface water drains, rivers, canals, ditches, streams or any other type of waterway. you are required to upgrade or replace your septic tank treatment system to a full sewage treatment plant by 2020, or when you sell a property, if it’s prior to this date.
Does a septic tank have to be registered?
A septic tank discharges water into the ground, and the quantity of such is important so as to avoid damage to the environment. If your septic tank discharges two cubic metres or less above ground, then you don’t need to register it. If it releases five cubic metres, or less, below ground level then it is also exempt.
Do I need consent to discharge septic tank?
You will require a ‘Permit to Discharge’, however you may qualify for an exempt status if your system meets certain requirements such as amount of discharge, septic tank or sewage treatment plant model (only EN 12566-3 2005 Certified plants accepted), plant location, intended discharge point, installation and
How far is septic tank from house?
Requirements vary from one area to another, but the normal minimum distance from the house is 10 feet. If you’ll be using a private well for drinking water, however, note that many state departments of health require a minimum of 50 feet between a new septic tank and a well, according to APEC Water.
How To Locate a Septic Tank
Customers frequently inquire about the location of a septic tank. Unless your septic tank is equipped with special risers that elevate the lids above ground level, you may need to enlist the assistance of a qualified professional. However, there are a number of things you may do to prepare yourself before calling for assistance. When it comes time to have your septic system repaired, being how to find your own septic system will save you money. Public health records can be obtained by contacting your local health department.
These permits should be accompanied by a graphic depicting the location of the septic system’s burying spot.
Public Records Request for the County of Nevada Request for Public Records from the County of Placer Examine the findings of your inspection report.
Make contact with the construction company that built your home.
- Find the location of the main sewer line.
- Locate the 4 inch sewer pipe that runs through your basement or crawlspace and take a measurement of the point at which it leaves the home.
- By carefully probing the yard every few feet and following the septic pipe across your yard, you should be able to detect any problems.
- The majority of septic tanks are placed 1 to 3 feet below and are located roughly 10 to 20 feet away from the house.
- An electronic metal detector can find the reinforcing bars in a concrete tank if it is built out of concrete.
- Please contact us.
- We have specialized technology that we can use to pinpoint the location of your tank.
- You should make a note of the position of your tank for future reference if you were successful in discovering it.
- A riser elevates the septic lid above the ground, making it easier to find and access your septic tank and its contents.
As a result, you will not have to pay a professional to identify and dig up the lids every time your septic system is repaired, which will help to protect your landscape and save you money.
How to Find Septic Tanks
Every septic tank will eventually get clogged with solid waste and will need to be drained and cleaned. Pumping out the septic system on a regular basis is essential to maintaining it in excellent functioning order. But what can you do if you don’t know where the septic tank is? What are your options? How to locate and locate your septic tank will be covered in this section. Septic tanks should not be installed in any one location because each property is unique. Septic tanks are difficult to detect, but there are several principles and indicators that might assist you.
How to Locate Septic Tanks: Using Public Records:
- Inquire with the previous owner of the property. This may be the quickest and most convenient method of locating a septic tank. Simply contact the previous owner and inquire as to the whereabouts of his or her septic tank. In spite of the fact that the previous owner should have shared this information with you when selling the home, it is easy to forget normal maintenance data. If you are unable to contact the previous owner or if the previous owner does not know the location of the septic tank, do not give up hope just yet. There are several alternative methods of locating a septic tank
- However, Consult the County Records for more information. The county should have a copy of the septic tank installation permit documents for your property on file. This file should include a schematic or map of the property that shows the location of the septic tank. If the septic tank was erected more than a decade ago, the information may or may not be on file. Call a few different septic tank pumping companies in your area. It’s conceivable that your septic tank was installed by a local business or contractor. Check with several businesses to check whether they have your address on file.
How to Identify Septic Tanks on Your Own Septic tanks are hardly the most visually appealing or pleasurable of systems to see. They are installed in such a way that they are hardly visible and are not visually highlighted or exhibited. In the event that your septic tank is actively being concealed, you will have to figure out how to locate it. One method of locating the septic tank is to trace the waste line from the house to the septic tank’s location. Identify where the sewage line departs the home, which is usually in the basement, and then travel to the same location outside the property.
Consider the area where a septic tank is most likely to be found.
- Usually between 10 and 20 feet away from the structure. It should not be too near for reasons of health and safety. When it comes to building costs, it is preferable to keep excavating to a minimum by not locating it too far away. From the house, it’s all downhill. Gravity is used to transfer waste in the majority of plumbing systems. This is not always the case, however, because certain systems make use of pumps. Is there a well, a stream, or any other site feature on your property that might have an impact on the installation of a septic tank? There cannot be a septic tank in close proximity to wells or the property line. Seek out bald places where there is no grass growth, which might indicate the presence of a shallow-buried septic tank top. Locate any green grass, which may be indicative of a septic tank that is overflowing or leaking
- Assuming you already know where to go, here’s what you should be looking for now:
How to Locate Septic Tanks Using Visual Indications
- What is the appearance of a septic tank? Septic tanks are rectangular in shape and measure around 4ft x 8ft. Knowing this, seek for a rectangular depression or a rectangular region of sparse grass growth in a rectangle area of sparse vegetation. When septic tanks are placed shallowly and close to the surface, the outcome is often sparse or uneven grass growth
- This is due to the fact that they are buried shallowly and close to the surface. Pipes that are unexplained. Air vents and cleanouts are common features of septic systems. If you notice pipes jutting out of the ground, it is possible that they are for the septic system. Copper is not used in the construction of these pipes, which are typically 4 to 6 inches in diameter and composed of cast iron or white or black plastic. Detecting an unpleasant odor implies that you have located the drainfield and that it is failing
- Wet places that haven’t been explained. if there is an area of your land that is perpetually wet or moist for no apparent reason, it is possible that this is the location of your septic tank. Most of the time, it is accompanied by disagreeable smells. Look for markers such as a stake, stones, or other sorts of objects. In order to indicate the position of the septic tank’s pumpout access, it is customary practice to post a marker. Boxes for electrical equipment. Pumps and grinders are commonly seen in septic tanks that are powered by electricity. If you have an electrical connection or box protruding from the ground distant from the home and are unsure what it is for, it is possible that it is for the septic system
- Lush green grass
- Or irrigation system. This might be the case if your property has a single patch with especially lush green grass and you have not watered or fertilized it. If this is the case, the septic tank may be positioned in this location. Unfortunately, that lush green grass indicates that you are experiencing seepage from your septic tank
- Nonetheless, Random dirt depressions in the earth, each measuring around 2 square feet, which may indicate a former excavation for tank pumping
If you are still unable to locate the septic tank, it is likely that you should contact a professional. A professional sewer tank plumber will locate and service septic systems on a regular basis and will be equipped with the required equipment and knowledge to locate your home’s septic tank swiftly and efficiently. Don’t be tempted to lift the lid or conduct any other work on your septic tank now that you know where to look. Septic tank lids are extremely heavy, and septic tanks emit harmful vapors.
Always get your septic tank serviced by a licensed and insured septic tank plumber.
The majority of individuals prefer to relax on their back patio or porch and take in the scenery rather than worrying about where their septic tank could be. When you know exactly where your septic tank is, it will be much easier to schedule routine sewer line cleanouts and repair appointments. Continue reading to find out more about how to locate your septic tank.
Follow the Main Sewer Line
Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your property. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about down there. Look for a pipe with a diameter of around four inches that is leading away from your home or building. Keep a note of the position of the sewer pipe and the point at which the line exits your home so that you can locate it outdoors.
If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your home.
Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may have to probe a bit further out before striking the tank.
Inspect Your Property
Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your yard. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about in it. Look for a pipe with a diameter of around four inches that is leading away from your home or business. Recall where your sewer pipe is located, as well as where it exits your home, in order to locate it while you are out in the field.
If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your house.
Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may need to probe a bit further out before striking the tank.
- Purchase a soil probe that you may use to locate hidden sewage lines and septic tanks. Find the main sewage line that goes to your septic tank by going to your basement or crawl area. Look for a pipe with a diameter of around four inches that leads away from your home. Keep track of the position of the sewer pipe and the point at which the line exits your home so that you can locate it outdoors. The sewer lines will take you to the location of your septic tank. If you have a drain snake, you may use it to try to track the approximate course of your pipes. Every two feet, insert the tiny metal probe into the dirt to locate and trace the sewage lines. Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks as much as 10 to 25 feet away, you may have to probe a bit further out before striking the tank.
If you are still having trouble locating your septic system, you might inquire of your neighbors about the location of their septic tank on their land. Finding out how far away their septic systems are will help you figure out where yours might be hidden in your yard or garden.
Check the Property Records
Are you unsure about how to obtain this? Simply contact your county’s health department for further information. Check with your local health agency to see if they have a property survey map and a septic tank map that you can borrow. Perhaps you will be shocked to learn that there are a variety of options to obtain information about your property without ever leaving the comfort of your own residence. Building permits, for example, are frequently found in county records, and they may provide schematics with specifications on how far away from a septic tank a home should be, as well as other important information such as the size of the tank.
Most counties, on the other hand, keep records of septic tank installations for every address.
Don’t Try to Fix Septic Tank Issues Yourself
Having trouble getting this? We can help. Simply contact your county’s health department for further information. Check with your local health agency to see if they have a property survey map and a septic tank map that you can use. – Perhaps you will be shocked to learn that there are several ways to obtain information on your property without ever leaving the comfort of your own residence. Structure permits, for example, are frequently found in county records, and they may include schematics with specifications on how far away from a septic tank a building should be, as well as other valuable information such as the size of the tank.
Yet the majority of counties continue to keep track of septic tank installations at all locations. For more information on the location of your septic tank, you can consult your home inspection documents or the deed to the property.
Schedule Septic Tank Maintenance
The maintenance of your septic tank on a regular basis helps to avoid sewer backups and costly repairs to your sewer system. You should plan to have your septic tank pumped out every three to five years, depending on the size of your tank and the number of people that reside in your home. The Original Plumber offers skilled septic tank and drain field maintenance and repair services at competitive prices. While it is useful to know where the septic tank is located, it is not required. Our team of skilled plumbers is equipped with all of the tools and equipment necessary to locate your tank, even if you have a vast property.
We are open seven days a week, twenty-four hours a day.
Frequently Asked Questions
A septic system is a system for the management of wastewater. Simply said, wastewater will exit your home through pipes until it reaches your septic tank, which is located outside your home. Septic tanks are normally located beneath the surface of the earth. Solids and liquids will separate in the septic tank as a result of the separation process. Eventually, the solids will fall to the bottom of the tank and the liquids will run out onto your leach field.
How do I know if I have a septic tank?
Even if there are no obvious signs of a septic tank in your yard – such as uneven landscaping – there are a few techniques to assess whether or not your home is equipped with an onsite sewage system. Checking your property records is the most reliable technique to ensure that you are utilizing the correct system. When you acquired your house, you should have received a copy of the septic system map with the property documents as well. Checking your electricity statement is another way to determine this.
If you’re also using well water, it’s possible that you won’t receive one at all.
What do I do once I locate my septic tank?
Once you’ve discovered where your septic tank is, there are a few things you should do. It is critical to clearly mark the position of your septic tank. With our inspection, pumping, and repair services, you can save time whether you need a sewer line cleanout or a septic tank maintenance job completed quickly. Make a note of the location of your tank so that you can find it again if necessary. It should be heavy enough so that it does not fly away in windy conditions. A creative approach to accomplish this without having an unattractive flag or marking in your yard is to use garden décor or a potted plant.
This way, you’ll have it for future reference and will be able to quickly locate the exact position if necessary.
Then contact The Original Plumber to have your septic system maintained on a regular basis. Preventing worse problems and the need for costly repairs down the line may be accomplished via proper septic system maintenance. All of the heavy lifting has been delegated to our team of professionals.
Find Septic soakaway / drainfield location using documents
- Send in your question or comment regarding septic tank and drainfield records, sketches, or diagrams that demonstrate component placement – utilizing documented information to locate the septic system
InspectAPedia does not allow any form of conflict of interest. The sponsors, goods, and services described on this website are not affiliated with us in any way. Using records to locate a septic drainfield or soakbed is described as follows: How to get records and revew papers in order to locate a septic tank, drainfield, or soakaway bed in a home or business. How to request paperwork that can document the septic system design “as approved” as well as that which was “as built” is explained in detail.
We also have anARTICLE INDEX for this topic, and you can use the SEARCH BOXes at the top and bottom of the page to obtain the information you need quickly and easily.
How to Use Septic System Records to Find the Drainfield – Whom to Ask – How to Find the Septic Leach Fields – Part 3
When it comes to septic systems, understanding where the drainfield is may be difficult because they are often underground systems. Finding the drainfield can be difficult because they are usually hidden. Because haphazard excavation by hand is extremely time-consuming and because haphazard excavation by backhoe can cause unnecessarily extensive damage to both a septic system and a homesite, drawing a sketch of the location of a septic tank, distribution box, and drainfield trenches or pits is a valuable document to prepare and keep with a home.
- Ask the owner if they have any sketches to leave with you; if they don’t have any sketches but know where the septic components are, walk the property with them and produce your own sketch of the septic components.
- Because anybody seeking for the system in the future is likely to start by locating the point where the sewage line exits the building, a former service worker or contractor understood it was a dependable location to leave a sketch.
- In certain cases, even though septic system and drainfield layout drawings have been submitted, it is possible that the “as built” drain field will not be identical to the plan filed since blockages might be identified during the drain field installation process.
- The septic tank’s center may be located using the simple but accurate measurement triangle depicted in the diagram below.
- It is not need to be visually appealing, to scale, or costly.
- Never rely on the local health agency or the building department to have drawings that show where the fields are located precisely.
- During our investigation, we discovered that one municipality had purposefully destroyed 50 years’ worth of septic and other construction plan records because they were tired of being pestered by residents who wanted that information and then complained when it turned out to be incorrect.
- Speak with contractors who are listed under the categories of Excavation, Plumbing, and Septic System Service since the excavator who has installed or worked on the property of your concern may be classified under one of those categories but not all of them.
- This article series, as well as our accompanyingSEPTIC LOCATION VIDEO, demonstrates how to locate the leach field or drainfield section of a septic system by going around a site with a camera.
(Septic drain fields are sometimes referred to as soil absorption systems or seepage beds in some circles.)
Reader CommentsQ A
@Joseph Coburn, please display the records regarding your septic system. Yes, Joseph, I’d be delighted to assist you in locating the leach bed on your property: Simply follow the “how to identify the drainfield” techniques and procedures outlined in the articles listed above under “Recommended Articles” labeled “How to Find the Drainfield.” LOCATION OF THE SEPTIC DRAINFIELD – BEGIN HERE PRECISE DRAINFIELD PIPE LOCATION – follow these procedures if you need to be precise with your drainage pipe location.
- More drainfield choices and approaches are available, including: It is necessary to excavate in order to locate drainage fields.
- REMARKING DRAINFIELD LOCATIONS OUT OF THE BOUNDS OF THE POSSIBLY UNLIKELY CLUES FROM THE VISUAL WORLD LOCATE THE DRAINFIELD VIA VISUAL INSTRUCTIONS LOCATE THE SEPTIC TANK IN ORDER TO FIND THE LEACH BEDS LOCATE @Dan Dyer, thank you for your comment.
- also have a look at the comments on your identical post at The location of my drain field has been discovered, and I need to figure out where the rest of it is before I can proceed to complete the task on time.
- As well as this, see THE LOCATION OF THE SEPTIC TANK AND THE LOCATION OF THE SEPTIC D-BOX Attempting to locate a septic system Septic drain field is located at 13368 East 49th Drive in Yuma.
- I’m looking to discover if there is any public information on a septic tank located at 5391 Hollis Goodwin rd.
- Continue reading at an SURPRISING DRAINFIELD LOCATIONALITY Select a topic from the closely-related articles listed below, or browse the entireARTICLE INDEX for more information.
Septic Drainfield Location Articles
- Clearance Disturbances, Septic System
- Odors, Septic or Sewer
- Locations of Septic Components
- Septic Drainfield Inspection Test at Home
- Septic Drainfield Location
- Septic Drainfield Inspection Test at Work
- LOCATION OF THE DRAINFIELD PIPE, EXACT
- EXCAVATE TO LOCATE THE DRAINFIELD
- REASONS FOR LOCATION OF THE DRAINFIELD
- Recordings to LOCATE the DRAINFIELD
- SURPRISING DRAINFIELD LOCATIONS
- UNLIKELY DRAINFIELD LOCATIONS
- VISUAL CLUES LOCATE the DRAINFIELD
- VISUAL CLUES LOCATE the SEPTIC TANK
- SEPTIC DRAINFIELD RESTORERS
- SEPTIC DRAINFIELD SIZE
- SEPTIC DRAINFIELD SHAPE
- SEPTIC TANK, HOW TO FINDfor information on locating the septic tank, chamber, drywell, or seepage pit
- SEPTIC DRAINFIELD RESTORERS
- SEPTIC TAN SEPTIC VIDEOSon the location of the septic system
Suggested citation for this web page
It is necessary to keep records in order to locate the drainfieldDatInspect A pedia.com- online encyclopedia of building environmental inspection, testing, diagnosis, repair and guidance on issue avoidance. Alternatively, have a look at this.
INDEX to RELATED ARTICLES:ARTICLE INDEX to SEPTIC SYSTEMS
Alternatives include asking a question or searching InspectApedia using the SEARCH BOXfound below.
Ask a Question or Search InspectApedia
We encourage you to use the search box just below, or if you prefer, you may make a question or remark in theCommentsbox below and we will get back to you as soon as possible. InspectApedia is a website that allows you to search for things.
Please keep in mind that the publication of your remark below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link. Your submission will appear when it has been reviewed by a moderator. We sincerely apologize for the inconvenience.
Citations can be shown or hidden by selecting Show or Hide Citations. InspectApedia.com is a publisher that provides references. Daniel Friedman is an American journalist and author.
Locate Your Drainfield
|You know your septic system drainfield is out there� but just where is it? It is important to locate it so you can avoid damaging it by:|
- Building a road over the drainfield
- Parking or operating heavy equipment on the drainfield
- Planting trees or bushes in close proximity to a drainfield is prohibited. Creating soil disturbances through a landscaping project or the presence of cattle
In addition, knowing where your drainfield is located allows you to inspect the drainfield for symptoms of trouble, such as damp soil and foul aromas. You should obtain a copy of the record sketch for your particular system. It is a diagram that shows where the various components of your septic system are placed. This diagram was previously referred to as a “as-built” or “record drawing.” You can obtain further information by contacting the Thurston County Permit Assistance Center (PAC) at 360-786-5490 or by downloading the Request for Record Drawing/Permit Information form.
SW in Olympia, Washington (PAC Hoursof Operation-LimitedHours Please Check Before You Leave).
This is the tax identification number that appears on your county tax bills.
(If you do not know your tax parcel number, contact the County Assessor’s office.) The level of detail and quality of the record drawings varies substantially.
a more recent diagram will indicate the tank, drainfield, replacement area (which will be used in the future if a replacement field is required), and any additional components of your system, such as a pump chamber or mound It is also possible to record the dimensions of the tank and the length of the drainfield lines.
- If you don’t water your grass in the late summer, you may notice green stripes in your yard as a result. These are the regions that are prone to flooding along the drainfield pipes. When it is cold outside, the regions above your pipes may be the first spots where frost melts in your yard. Do you have any ports for monitoring or clean-outs? These are tubes or pipes with a white cap that are cut off at or near the ground level. Drainfield pipes include liquid level indicators that are situated at the ends of the pipes, which allow you to monitor the amount of liquid in the pipes. Examine the regions leading away from the septic tank with great caution. Avoid the use of heavy steel wrecking bars or other probing equipment that might cause damage to the septic tank top or other components of the system. Take note of any signs you see, such as shallow, parallel depressions that may indicate drainfield trenches. The installation of a drainfield among huge trees or in particularly rough terrain is quite unlikely. Examine the area beneath the home where the sewer line emerges from the foundation. The septic tank is typically located within 10 feet of the foundation
- However, this might vary. Engage the services of a competent business to send down echo-locators
Where’s my septic tank?
There are a few solutions available if the previous homeowner failed to supply this critical information or if you have misplaced your original copy:
- Your local DHEC office may have a copy of your building permit on file if your house was built within the last five years or fewer, according to the DHEC. A copy of a septic tank permit can be obtained from the local office by any individual or group, regardless of whether or not they own the land in question. Because of this, it is highly recommended that you have as much of the following information as possible ready at the time of your request.
- Your local DHEC office may have a copy of your building permit on file if your home was constructed within the last five years or less, according to the DHEC. A copy of a septic tank permit can be obtained from the local office by any individual or group, regardless of whether they own the land. If you have as much of the following information as possible ready at the time of your request, the search process will go much more quickly:
- You may also submit a request for a copy of the permission through our Freedom of Information office, although this is not mandatory. To obtain a copy through the Freedom of Information Office, please complete and submit a copy of the DHEC FOI form. Instructions are given with the application. If feasible, please include the information about the property that is stated above. When looking around your yard, search for manhole covers or lids that have been buried by grass or leaves if your house was constructed before 1990.
Septic Tank Alerts Septic Tank Alerts
3 Easy Ways To Find Your Septic Tank
If you’ve recently moved into a new house, finding the location of the septic system is definitely at the bottom of your list of things to accomplish. In any case, being aware of the location of your septic tank will help you save both time and money in the long run. Being able to pinpoint the position of your tank might make it simpler to diagnose septic tank problems more quickly. It can also assist you in avoiding complications that may arise as a result of property improvements such as landscaping and renovation.
When it comes to septic tank repairs and replacements, you can rely on the professionals at Jones PlumbingSeptic Tank Service for all of your requirements!
Check Property Records
The installation of an aseptic tank is often subject to a construction permit requirement in most counties. Accessible through the county website, permits and other septic tank placement documents give detailed information on the system’s size as well as the tank’s exact position. It’s possible that you acquired this information at the time of your purchase of the property.
When examining these records, take close attention to the small facts, such as the relative distance between your home and the tank. Take note that property landmarks may have changed after the tank was built, so be cautious when driving about.
Look For Telltale Signs
A bald area on your grass might serve as an obvious clue of the position of your septic tank. In contrast, an area of lush grass beside the septic tank might be a symptom of a deteriorating drain field, which would indicate that the tank is collapsing. It is possible that an unexpected rise in the terrain indicates the location of your septic tank. If there are no visible traces of the tank, you can carefully probe the earth with a metal probe to detect any subsurface pipes or lids that may be leading to it.
Ask A Professional
If you are unable to locate the septic tank on your own, consulting with a local septic tank firm might be a convenient and cost-effective solution. Who knows, they could have even performed maintenance on your property’s tank before you purchased it. In any case, a septic tank specialist will be able to find your tank in a short amount of time. It is also beneficial to establish a relationship today since it will be beneficial in the future should you want Septic Tank Cleaning or Septic Tank Repair services.
Check out our septic system maintenance guidelines for more information on how to keep your home’s sewage system functioning smoothly and efficiently.
3 Simple Ways To Locate Your Septic Tank
3 Easy Ways to Locate Your Septic Tank (with Pictures)
3 Simple Ways To Locate Your Septic Tank
Septic Tank Location: 3 Easy Steps (with Pictures) | Home
3 Ways To Locate Your Septic Tank
Despite the fact that septic tanks are hidden underground, the following procedures will assist you in locating your septic tank quickly and simply so that you may call in the Clermont FL septic tank specialists to do routine maintenance on your septic system.
1 Visually Search For The Tank
Over the course of a few years, the grass growing in your yard may easily cover the position of your septic tank to the point that the entire yard seems to be the same color. Begin by taking a cautious stroll around the yard, feeling for any odd low or high locations that might indicate the presence of a drain field or tank. Most of the time, a tank is positioned between 10 and 25 feet away from the home. Because the majority of tanks will be no more than 5 feet away, you may begin your visual search from there.
2 Perform A Records Search
A check of public records is one of the most effective methods of determining the precise location of your septic tank on your property. If you still have a copy of your initial house inspection report, there may be an attachment called a “as-built” document that you may refer to. The location of the septic tank in relation to the home will be shown on this figure in great detail. Though certain landmarks on the site may have changed over time, measurements should still allow you to pinpoint the exact position of your vehicle.
If you do not have these documents, Lake County may still have copies of the permit records at the local health department, which you can obtain from them.
3 Use Septic Tank Risers
A septic tank riser may have been built when the septic tank was first put in place in the ground by the firm in charge of the process so that their specialist can locate the tank quickly while doing inspections and maintenance on it. They are placed to make the pumping procedure easier, by allowing the technician to detect the riser and begin to work as soon as possible when it is discovered. Riser pipes are made of plastic or concrete, and they are installed vertically from access points or pump-out ports to a few inches above ground level.
You might be in risk if you attempt to open the tank by yourself, depending on the condition of the system.
You should keep a record of the tank’s position for future reference, so that you don’t have to go through this process again.
Share This Story, Choose Your Platform!
a link to the page’s load
How to Locate Your Septic Tank
a link to the page load
How To Find A Septic Tank: Step By Step
It is critical to maintain the health of your septic tank since it is responsible for securely storing and handling the wastewater that drains from your house. It is necessary to pump your septic tank once every 1-3 years, depending on the number of people living in your household and the size of your tank, in order to avoid septic tank repairs or early failure, which means you must be familiar with the location of your tank. It’s not often simple to identify your septic tank, and many plumbers charge extra for this service, which is especially true if your tank’s lid is buried beneath.
1. Gather Some Helpful Tools
Septic tank location may be made much easier with the use of several simple instruments and techniques. To locate your septic tank, you only need to know the following information: A soil probe is one of the most useful instruments for locating a septic tank. It is a tiny piece of metal that is used to puncture through the earth and detect anything that could be buried underneath. Start at the point where your sewage line exits your home and work your way straight out, inserting your soil probe every two feet along the way.
Using this method, you may also locate the cover for your septic tank.
While we highly advise keeping your cover clean and exposed in the event that you require emergency septic service, we recognize that this is not always the case.
2. Use a Septic Tank Map
If you are a new homeowner who is trying to figure out where your septic tank is, a septic tank map should be included in your inspection documentation.
You can use this information to assist you in pinpointing the exact position of your storage tank. If you don’t have access to this map, there are a few of additional strategies you might employ.
3. Start Ruling Areas Out
The location of a septic tank cannot be constructed in specific areas due to the risk of causing major damage to your property or tank, as specified by local rules. Your septic tank will not be affected by the following:
- Immediately adjacent to your well
- Beneath your home
- Directly against your home
- For example, underneath your driveway
- Under trees
- And other locations. Structures like a patio or deck are good examples of this.
4. Inspect Your Property
If you take a hard look around your land, there’s a high possibility you’ll be able to locate your septic tank without having to do any probing whatsoever. In many circumstances, a septic tank may be identified by a slight dip or slope on your land that cannot be explained by any other means. Due to the fact that the hole that your contractors excavated for your septic tank may not have been exactly the proper size, they proceeded to install the tank anyhow. This is a rather regular occurrence.
When there is a minor divot or depression, it indicates that the hole was too large and that your contractors simply did not fill the depression to level the hole.
The likelihood of your septic tank being discovered in a few specific locations is quite high.
- If you take a hard look around your land, there’s a high possibility you’ll be able to locate your septic tank without having to do any probing or excavation. Most of the time, a septic tank may be identified by a little dip or slope on your land that can’t be explained by anything else. Due to the fact that the hole that your builders excavated for your septic tank may not have been exactly the proper size, they proceeded to install the tank anyhow. Why? Something like this is not unheard of. If the hole was too small, the top of the tank will protrude above ground level, and the rest of the tank will be filled with extra dirt, resulting in a little mound on your land that is usually covered with grass, soil, or other natural vegetation. When there is a minor divot or depression, it indicates that the hole was too large and that your builders simply did not fill the depression to level the hole out. During rainstorms, this is often a location that becomes highly wet or even floods. The likelihood of your septic tank being discovered in a few specific locations is quite high. You will almost certainly not locate your septic tank in any of the following locations, either because of code issues or just because it doesn’t make sense:
5. Inspect Your Yard
If you take a hard look around your property, there’s a high possibility you’ll be able to locate your septic tank without having to dig it up. In many circumstances, a septic tank may be identified on your land by a minor dip or slope that cannot be explained. This is due to the fact that the hole that your builders dug for your septic tank may not have been exactly the proper size, but they went ahead and installed the tank nevertheless. This is not an unusual occurrence. If the hole was too small, the top of the tank will protrude above ground level, and the rest of the tank will be filled in with extra earth, resulting in a little mound on your land that is usually covered with grass, soil, or other natural vegetation.
During rainstorms, this is often a region that becomes highly wet or even floods.
Because of code issues or simply because it doesn’t make sense, it’s highly unlikely that your septic tank will be located near any of the following:
- If your septic tank is overfilled, sewage can leak out into the ground and function as fertilizer for your lawn, resulting in lush green grass. A area of grass that is very lush and green is a good sign that your septic tank is just beneath it
- Puddles that don’t make sense: If your septic tank is seriously overfilled, it is possible that water will pool on your grass. Another telltale indicator that your septic tank is below ground level is an unexplainable pool of water. Ground that is uneven: When installing septic tanks, it is possible that the contractors will mistakenly create high or low patches on your grass. If you come across any uneven terrain, it’s possible that your septic tank is right there.
The metal soil probe can let you find out for certain whether or not your septic tank is located in a certain area of your yard or not. As soon as your metal soil probe makes contact with the tank, you may use your shovel to dig out the grass surrounding it and discover the septic tank lid.
6. Follow Your Sewer Main/Sewer Pipes
Using your metal soil probe, you can determine whether or not your septic tank is located in a certain area of your yard.
As soon as your metal soil probe makes contact with the tank, you may use your shovel to dig up the grass surrounding it and discover the septic tank cover.
7. Check Your Property Records
Lastly, if all else fails, a search of your property’s public records will almost certainly reveal the location of the tank you’re looking for. Your builders most likely secured a permit for your property because septic systems are required to be installed by law in every state. In order to do so, they had to develop a thorough plan that depicted your property as well as the exact location where they intended to construct the tank. This is done to ensure that the local health department is aware of the tank and is prepared to deal with any issues that may arise as a result of its presence.
If you look hard enough, you may be able to locate the original building records for your home without ever having to get in your car or visit your local records center.
What to Do Once You Find Your Septic Tank
Upon discovering the position of your septic tank, you should mark its location on a map of your property. Use something to indicate the location of your lid, such as an attractive garden item that can’t be changed, to help you locate it. A birdbath, a rock, or a potted plant are just a few of the possibilities. You are now ready to arrange your septic tank inspection and pumping service. Contact us now! If you have any more concerns regarding how to locate your septic tank, or if you want septic tank servicing, please contact The Plumbing Experts at (864) 210-3127 right now!
How to Find Your Septic Tank
Riverside, California 92504-17333 Van Buren Boulevard Call us right now at (951) 780-5922. Knowing where your septic tank is located on your property is critical to doing routine maintenance on your septic system. Eventually, all septic tanks will become overflowing and will require pumping. When your tank’s lid is difficult to locate, you may be at a loss for what to do or where to look for the lid when you need it. Most septic tanks are designed to be as unobtrusive as possible, making it quite difficult to locate one on your own in most cases.
If you remove the lids yourself, you run the risk of causing a septic system to collapse or a leaky system to transmit bacterial or viral diseases due to filthy circumstances.
Check the Map
The most straightforward method of locating your tank lid is to review the records. It is recommended that you submit this map with your home inspection documentation if you have recently acquired the property.
If you don’t have one, you can request one from the county. The majority of septic systems come with a comprehensive map that will assist you in locating the lid. Because the data are normally so thorough, you can usually measure your way to the precise site.
Pipes Lead the Way
Every septic tank is connected to the main sewage line that runs from your house. You may follow this line all the way from its starting point at the home to the tank’s site. Fortunately for individuals who choose this strategy, there is no digging involved! Simply use a metal rod to probe the ground for the line, then follow it with your eyes closed. It is common for tanks to be positioned 10 to 25 feet from a home’s foundation and to be built of concrete, fiberglass, or polyethylene material.
Look For Signs
For whatever reason you do not have access to a map, or if you do have access to a map but are having difficulty locating the sewage line, you can seek for ground markers to guide you. Small hills or pits that appear to be out of place might be an indication of an earthquake. Even in the presence of grass or other plants, a septic tank with a surface area of 40 square feet will leave a little distortion in the ground, even if the tank is not completely filled. If none of the aforementioned approaches succeed in locating your tank lid, you may always engage the assistance of a knowledgeable specialist.
No matter how you establish the position of your septic system, make a note of it in your records or plainly mark the place with a permanent marker to avoid future complications and problems.
Contact Us Today
We at West Coast Sanitation understand that you are busy and do not have time to deal with septic issues. One of the most effective methods to maintain this balance and ensure that your septic system continues to function properly is to have your tank pumped on a regular basis. If you want assistance in identifying or maintaining your septic system, don’t hesitate to contact us. Please contact us at (951) 780-5922 as soon as possible. If you have any questions, we have specialists standing by to help you resolve them and get your system back up and running.
Keeping Well and Septic System Records
It’s critical to keep track of your own well and septic data. Photograph courtesy of George Hurd of Penn State Extension Being prepared with a “Well File” and a “Septic File,” or other written documents including information on your water system, is a crucial step in safeguarding the health of your family and your water resources. In addition to making it simpler to arrange well, water treatment system, or septic system maintenance, good records may also aid in identifying the root causes of water quality variations.
- You should keep track of the following: well and septic system installation, permits, maintenance, inspections, pumping, repairs, and water testing.
- Keep records of service visits if you have water treatment equipment and follow a maintenance plan.
- Also, keep the manufacturer’s information for any water treatment equipment you use with your well file on hand for reference.
- Copies of all water quality test results should be maintained on hand in order to track any changes that may occur over time.
- Your records must also contain a map indicating the position of your well as well as the location of your septic system, which should include the septic tank and drainfield.
- Locate the location of your well head on your property and mark it.
- If you do not have access to blueprints, locate the point at which your sewer line exits your home.
- Your septic tank pumper may also be able to assist you in locating all of the components of your system.
Create several plot plan diagrams with measurements that include a rough sketch of your house, a rough sketch of your septic tank cover, a rough sketch of your drainfield area, a rough sketch of your well, and any other permanent reference points such as trees or large rocks and keep them with your well and septic system records.
It is important to note that a well log is an important source of information for documenting the building of a water supply well, according to the Iowa Department of Natural Resources.
In-depth well logs contain information such as the types and thickness of each geological sequence encountered, the types of materials used in the well’s construction, the construction techniques employed during the well’s installation, and the water levels of the aquifer(s) while at rest and when pumping.
- The well log is a valuable tool for the well owner, since it may be used to troubleshoot any difficulties that may arise with the well in the future.
- Individual water well and spring reports, as well as data package downloads, are available online through the PaGWIS.
- Beginning in 1966, drillers have been obliged to report water well completion information, which includes the location of water wells drilled in Pennsylvania as well as the criteria used in their construction.
- Go to the PaGWIS website and look for the link that says “Groundwater Records Online” to see if your well records are available on the internet.
- Records of your well and septic system are essential for maintaining and safeguarding both the health of your home’s water system as well as the health of your family.
If the quality of your water deteriorates, you can take steps to improve it. Your well’s historical water quality data can be used to illustrate the water quality of your well in the past. Having this information will be useful if you ever decide to sell or transfer your property.
Sewage System Records
For your convenience, the Health District maintains a database of all existing on-site sewage systems in the area. Please have your address and/or your parcel ID number accessible to aid with this procedure. Thank you for your cooperation. Every owner of an on-site sewage system must be aware of the location of their on-site sewage system in order to ensure that it is properly maintained. Pumpers may charge you an additional fee for the time it takes them to discover and/or dig up the lids to the septic tank in order to be able to pump the septic tank.
We refer to this document as a “as-built,” and it is a drawing that shows exactly where your system was located when it was examined by our office.
- Name of the property owner(s):
- Tax Parcel ID:
- Physical address of the system or road name *:
- Name of the property owner(s):
In the case that your location was originally a “route, box,” please list the roads and streets that the property is located on and around. According to this example, “the property is located on 30th Avenue between Spruce and Verbena.”
- The roads/streets that the property is located on and by should be included if your location was formerly a “route, box.” “The property is located on 30th Avenue between Spruce and Verbena,” for example.
- Mail? Please provide your mailing address so that I may pick it up. Email
Please keep in mind that before to 1975, permits were not necessary by law. If your system was implemented prior to 1975, it is possible that no records are accessible. If your system was installed prior to 1975 and there are no records accessible, the following suggestions may be useful in locating your system:
- NOTE: Permits were not necessary before to 1975 under state and federal regulations. You may be unable to access any records if your system was built prior to 1975. If your system was installed prior to 1975 and there are no records accessible, the following suggestions may be useful in locating your system: 1.
- Those tanks built after 1976 are two-compartment tanks, and both compartments will need to be emptied.
- The tank’s lids are circular in shape, 20″-24″ in diameter, and 5′-5 12′ apart
- They are 20″-24″ in diameter and 5′-5 12′ apart
- Because the tanks are composed of concrete reinforced with rebar and the handles on the lids are often made of metal wire, you may be able to discover them with the use of a metal detector
- However, this is not always the case.