Where To Buy Precast Septic Tank Near Me? (Solution)

Can you build a deck near septic tank?

  • It is usually not a good idea to build a deck near or on top of a septic tank. Most zoning ordinances will require that you maintain at least a 5′ setback from an underground septic system. Installing frost footings and applying deck loads over a septic tank could result in damaging the tank or waste lines.

Are plastic septic tanks better than concrete?

Plastic septic tanks are watertight and are immune to water-based corrosion. They are also rust-resistant. Plastic tanks are less prone to cracking since plastic is flexible, and thus a plastic septic tank does not crack as much as a cement septic tank. Plastic septic tanks are more hygienic than cement tanks.

How much are concrete holding tanks?

Answer: The average retail cost for a 1000 gallon concrete septic tank is $1000.

How long do cement septic tanks last?

Inspectapedia estimates that a steel tank baffles will rust out in 15 to 20 years and may collapse if driven over, but a concrete tank will last 40 years or more as long as the wastewater is not acidic. It’s important to consider the life expectancy of a drain-field, too.

What sizes are concrete septic tanks?

What sizes do concrete septic tanks come in? Standard tank sizes are 1000 gallon, 1250 gallon, and 1500 gallons nationwide.

What is the cheapest septic tank?

Types of Septic Tank Systems These conventional septic systems are usually the most affordable, with an average cost of around $3,000.

How deep should a septic tank be?

Septic tanks are typically rectangular in shape and measure approximately 5 feet by 8 feet. In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground.

What size do septic holding tanks come in?

Underground septic tanks are available in sizes ranging from 200 gallons up to 1500 gallons. An inlet and outlet may be added to tanks sized 200 gallons to 500 gallons for $75.00.

What will ruin a septic system?

Any paper products like tissues, paper towels, tampons, or sanitary products, even some heavier toilet paper, will clog your system if you flush enough of it. Wet wipes are another product that you should never flush into a septic system.

Does heavy rain affect septic tank?

It is common to have a septic back up after or even during a heavy rain. Significant rainfall can quickly flood the ground around the soil absorption area (drainfield) leaving it saturated, making it impossible for water to flow out of your septic system.

How much does it cost to pump a septic tank?

How much does it cost to pump out a septic tank? The average cost is $300, but can run up to $500, depending on your location. The tank should be pumped out every three to five years.

How often does a 1000 gallon septic tank need to be pumped?

For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.

Which type of septic tank is best?

The best choice is a precast concrete septic tank. Precast septic tanks hold many advantages over plastic, steel, or fiberglass tanks. This is why so many cities and towns actually require the use of concrete septic tanks.

Can you have a septic tank without a leach field?

The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.

Septic Tanks

The residential septic tanks we manufacture are made of precast concrete, providing homeowners in New England with a dependable wastewater management system. Shea’s precast concrete septic tanks are sturdy, waterproof, and ecologically friendly, making them an excellent choice for any home waste management system in the world. These precast septic tanks are manufactured to your specifications and are also simple to install in your house or business. For more information about our precast concrete residential septic tanks, please contact Shea Concrete Products at (800) 696-SHEA.

Take a look at the Case Study

Septic Tank 1000 Gallon

Founded in 1968, Jensen Precast has been manufacturing septic tanks. With over 30 years of experience in the septic tank industry, we are the leading producer in Western United States. Septic tanks are the first and most important component of a comprehensive onsite wastewater treatment system. When utilized in conjunction with one of the various treatment and dispersion options available, the septic tank may be considered a comprehensive onsite wastewater treatment system. When you choose a Jensen Precast Septic Tank, you will receive the following benefits: Strength and Structural Integrity – All Jensen Precast septic tanks are engineered by Professional Civil and Structural Engineers to withstand the anticipated loading conditions.

  1. In accordance with the National Precast Concrete Association’s Plant Certification Program, our production operations are subjected to extensive and comprehensive quality control methods during the manufacturing process.
  2. Acceptance by the Uniform Plumbing Code (UPC)- Jensen Precast septic tanks are listed in the Uniform Plumbing Code (UPC), which was issued by the International Association of Plumbing and Mechanical Officials (IAPMO).
  3. Designed and produced in line with the strict and extensive criteria of this national standard, Jensen Precast septic tanks meet or exceed the standards of this standard.
  4. We maintain a large inventory of septic tanks on hand, allowing us to provide quick delivery to any location within our service region.
  5. Grease interceptors from Jensen Precast are available in any size and capacity that is necessary.
  6. The addition of a few simple and cost-effective accessories to your septic tank can allow you to drastically reduce your long-term expenses of ownership.
  7. The installation of an effluent filter in a septic tank is a cost-effective and easy way to increase the life and efficacy of any treatment system while also reducing maintenance costs.
  8. Carbon filters are good at reducing the smells emitted by sewage gas vents.
  9. System for Treatment and Disposal – Jensen Precast is a full-line supplier of a wide range of septic tank treatment systems as well as associated parts, components, and accessories.

Pumps, control panels, sand filters, AdvanTex textile treatment systems, and a variety of other products are available.

Concrete Septic Tanks

  • 650 gallons 1000-gallon capacity in a single compartment. 1250 gal. in two compartments 1250 gal. in two compartments 1250 gallons in three containers with a siphon 3 Comp. for the Pump
  • 1500 gal. 3 Comp. for the Pump 2 separate compartments
  • 1500 gallons a three-compartment system with a siphon
  • 1500 gal. 3 Comp. for the Pump
  • 1750 gal. 3 Comp. for the Pump 2000 gal. capacity in two compartments. 2500 gal. capacity in 2 compartments. It has two compartments and is made of plastic 1500.

Approximately 1500 gallons 3-Compact with a Siphon; 1500-gallon capacity There are three components to the pump, which holds 1750 gallons. 2000 gal. in 2 compartments 2500 gal., 2 compartments Plastic 1500; 2 Compartments;

  • Pump on a regular basis. Make sure to pump out your septic tank on a regular basis since a neglected system can represent a health danger to you and your family. Pumping your sewage tank once every three to five years is suggested.
  • Ensure that your filter is clean. Inside the tank, there is a filter that has to be cleaned on a yearly basis.
  • Keep an eye on what you flush. To avoid clogging the toilet, just use it for human waste and toilet paper. You should avoid adding any additives, chemicals, paint, food particles, or anything else into your septic system since doing so might cause it to clog and/or cause expensive damage to it. Use of Rid-X or powdered soaps is strictly prohibited.
  • What You Flush Should Be Considered Take care to ensure that only human waste and toilet paper are flushed in order to avoid contamination. In order to avoid clogging and/or causing costly damage to your septic system, you should avoid adding any additives, chemicals, paint, food particles, or anything else to your system. Rid-X or powdered soaps should not be used.

1000 Gallon Septic Tanks

Our 1000 gallon septic tank, which is constructed of precast concrete, has a capacity of 1000 gallons of liquid capacity. With this mid-seam design concrete septic tank, you may connect the pipe from the home to either one of the tank’s side or center inlets, depending on your preference. The same choice is accessible at the tank’s outlet, whether it is exiting to the leach field from the tank’s side or exiting from the tank’s central outlet. To connect the pipe entering and exiting the precast construction, Polylok IV closed-end boots are utilized.

ASTM C 1227NPCA is fully compliant with all best-practice criteria.

1000 Gallon Septic Tank DimensionsDetails
Tank dimensions 8’ x 5’8” x 5’2”
Number of bedrooms supported Formerly 2 Now used as a pump station, holding tank, or adding to an existing system
Pre-assembled Yes
Ideal for high water table No, but our 1000 gallon monolithic septic tank is.
Average retail cost $1062.50
Number of covers (lids) 2
Can come in traffic rated (H20) capacity Yes
Concrete strength 5,000 PSI
What are its gallons per vertical inch 21
Weight 8,600 lbs.
Fiber re-enforced Yes
Number of inlets boots (Up to schedule 40pipe can slide through) 3
Height of inlet from bottom of tank to bottom of pipe 51”
Number of outlets boots (Up to schedule 40 pipe can slide through) 3
Height of outlet from bottom of tank to bottom of pipe 48”
Required height of inlet baffle (20% of liquid level) 9”
Required height of outlet baffle (40% of liquid level) 18”
See also:  When To Pump Septic Tank And Table? (Question)

Frequently Asked Questions

In response to your question, the typical retail price for a 1000-gallon concrete septic tank is $1062.55.

What is the most common septic tank size?

Answer:It is a 1000 gallon septic tank across the United States, however it is rarely utilized as a septic tank in New Hampshire. By updating the state standards in 2012, the Department of Subsurface (DES) effectively rendered it no longer applicable as a stated tank size in New Hampshire. They are currently being utilized as a pump station, holding tank, or to increase the capacity of an existing septic system, among other things.

Is it ideal for high water table properties?

A monolithic septic tank is recommended for locations with high water tables since the seam is located at the very top of the septic tank, rather than at the bottom. Mid-seam and monolithic types of 1000 gallon septic tanks are both available from Septic Tanks Direct.

How much does a 1000 gallon concrete septic tank weigh?

Answer:Our 1000 gallon tanks weigh around 8,600 lbs, although the weight of precast tanks varies significantly across manufacturers based on the specifications, wall thickness, floortop thickness, and rebar reinforcement used in the construction.

How deep is a 1000 gallon septic tank?

Septic tanks made of concrete are generally 4′ 8″ deep and hold 1,000 gallons of water.

How many bedrooms does a 1000 gallon septic tank support?

Answer:In New Hampshire, the minimum need used to be many, then two, and currently a 1250 gallon septic tank is the bare essential. In New Hampshire, a 1000-gallon tank is currently often utilized as a holding tank or pump station, or to increase the capacity of an existing septic system.

Can you drive over a 1000 gallon septic tank?

It is determined by the design rating. We make it in three different configurations: H-10 is designed for pedestrian activity and has a live load of 300 pounds per square foot plus a burial depth of 3 feet. HD is intended for burial depths up to 5 feet. H-20 is designed for drive-over traffic and burial depths up to 6 feet.

1000 Gallon Septic Tank Dimensions, Features/Details*

  • In two-bedroom installations, a 1000-gallon septic tank is utilized. This structure is frequently used as a pump station. For many years, the standard size in New Hampshire was the same as the standard size in Maine. This is the smallest size that may be used as a grease trap and is suggested for this application. It is shipped pre-assembled to make installation as simple as possible

In two-bedroom installations, a 1000-gallon septic tank is used. A pump station is often employed. For many years, this was the standard size in New Hampshire, and it continues to be the normal size in Maine. In order to be used as a grease trap, this is the smallest size that is advised; To make installation easier, it is shipped pre-assembled.

  • Septic Tanks: Precast Concrete Septic Tank – 1250 Gallons
  • Precast Concrete Septic Tank – 1250 Gallons Monolithic
  • Precast Concrete Septic Tank – 1500 Gallons Monolithic
  • Precast Concrete Septic Tank – 1600 Gallons
  • Precast Concrete Septic Tank – 1600 Gallons Monolithic
  • Precast Concrete Septic Tank – 2000 Gallons
  • Precast Concrete Septic Tank – 2000 Gallons Monolithic
  • Precast Concrete Septic Tank – 1025

a little about the author: The Andrew J. Foss, Inc. precast concrete firm was founded by my father in 1963 when he was just 19 years old. My precast education began at a very young age for myself. Everything I know about producing high-quality precast concrete goods, from septic tanks to concrete headwalls, was passed down to me by him. He also taught me that in order to be successful in business, you must provide a superior product and treat your customers the way you would like to be treated yourself.

Septic Tanks

Listed below is a list of the septic tanks, chlorine contact tanks, and siphon dose tank packages thatCamden Supplyoffers, along with detailed descriptions of their features and specifications. Please call Camden Supply and chat with one of our staff if you require further information on a certain product.

Single Compartment Septic Tanks

A one-compartment steel-reinforced concrete septic tank, according to the script. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 56 inches
  • Overall length is 79 inches
  • Overall width is 48 inches
  • Height to center line of inlet is 48 inches
  • Height to center line of outflow is 45 inches
  • Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


600 Gallon Single Septic Tank

Specifications:

  • Overall height is 62 inches
  • Overall length is 79 inches
  • Overall width is 48 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of outflow is 49 inches
  • Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


1000 Gallon Single Septic Tank

Septic tank with a single compartment made of steel reinforced concrete (SRC). Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 60 inches
  • Overall length is 96 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 8,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1250 Gallon Single Septic Tank

A one-compartment steel-reinforced concrete septic tank with the lower portion cast as a single piece so that there are no seams that come into touch with effluent. Specifications:

  • Overall height is 60 inches
  • Overall length is 117 inches
  • Overall width is 68 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 10,400 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psiApplications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1500 Gallon Single Septic Tank

Specifications:

  • Overall height is 60 inches
  • Overall length is 150 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 11,700 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


25003500Gallon Single Septic Holding Tanks

Single Septic Holding Tank with a capacity of 2500 gallonsSpecifications:

  • Overall height is 68 inches
  • Overall length is 144 inches
  • Overall width is 78 inches
  • Height to center line of intake is 61 inches
  • Height to center line of outflow is 61 inches
  • Weight is 16,000 pounds.

It measures 68 inches in height, 144 inches in length, and 78 inches in width. The height to the center line of the inlet is 61 inches, and the height to center line of outlet is 61 inches. It weighs 16,000 pounds.

  • Overall height is 98 inches
  • Overall length is 144 inches
  • Overall width is 78 inches
  • Height to center line of intake is 91 inches
  • Height to center line of exit is 91 inches
  • Weight is 20,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


Dual Compartment Septic Tanks

Description:Two-compartment tank with solids separator between the first and second compartments, holding 500 gallons and 500 gallons, respectively. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 60 inches
  • Overall length is 96 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 10,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1250 Gallon Dual Septic Tank

Description:Two-compartment tank with a solids separator between the first and second compartments, holding 625 gallons and 625 gallons. Specifications:

  • Overall height is 60 inches
  • Overall length is 117 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 10,700 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


1500 Gallon Dual Septic Tank

Description:Two compartment system with a capacity of 1000 gallons in the first compartment and 500 gallons in the second compartment. The dosage pump portion is usually found in the second compartment. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • A two-chamber tank with a capacity of 1000 gallons in the first compartment and 500 gallons in the second. Dosing pump portion is usually found in the second compartment. A single piece is used for the lower area so there are no seams to come into touch with effluent. Specifications:
See also:  How To Build A T For A Septic Tank? (Question)
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.


Triple Compartment Septic Tanks

Description:Three-compartment system with a solids separator between the first and second compartments.

Each compartment holds 500 gallons. The dosage pump segment is usually found in the third compartment. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

  • Overall height is 60 inches
  • Overall length is 150 inches
  • Overall width is 67 inches
  • Height to center line of inlet is 52 inches
  • Height to center line of exit is 49 inches
  • Weight is 12,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections. Available with pre-wired pump packages, complete with alarm, floats, and pump pad, with horse powers from 1/3 to 1.5, with up to 135 feet of total head capacity.


Chlorine Contact Tanks

Specifications:

  • Specifications:
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.500_gallon_chlorine_contact_or_grease_interceptor.pdfDownload File


Siphon Dose Tank Packages

Specifications:

  • It measures 56 inches in height, 79 inches in length, 48 inches in width, 48 inches in height from center line of intake, 48 inches in height from center line of outlet, and 5,000 pounds in weight. It is equipped with an indoor alarm and alarm float.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.


1000 Gallon Siphon Tank Package

Specifications:

  • Specifications:
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1250 Gallon Siphon Tank Package

Specifications:

  • It measures 60 inches in height, 117 inches in length, and 68 inches in width. It measures 52 inches in height from the center line of the inlet and 52 inches in height from the center line of the outlet. It weighs 10,400 pounds. It comes with an indoor alarm and an alarm float.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1500 Gallon Siphon Tank Package

Specifications:

  • Overall height is 60 inches
  • Overall length is 150 inches
  • Overall width is 67 inches
  • Height to center line of intake is 52 inches
  • Height to center line of exit is 52 inches
  • Weight is 13,000 pounds
  • Includes indoor alarm and alarm float
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

Concrete Septic Tanks Are Probably The Best Option — Build With a Bang

Approximately 60″ in height, 150″ in length, 67″ in width, 52″ in height to center line of intake, 52″ in height to center line of outflow, 13,000 lbs in weight, and equipped with an Indoor Alarm and an Alarm float. When constructed properly and maintained on a regular basis, the majority of concrete septic tanks may endure for up to 40 years. No matter which option you choose, keep in mind that a home’s septic system should be cleaned, examined for leaks, and professionally maintained every 3-6 months in order to keep it healthy and running correctly for the homeowner.

  1. The size of the septic tank that is necessary in a particular region will also be determined by state and municipal laws.
  2. More and more states are requiring 1000-gallon tanks as the bare minimum size requirement.
  3. Every state and local municipality has rigorous regulations governing product dimensions and installation methods that must be followed.
  4. Construction of concrete-based septic tanks is currently the most common form of septic tank available on the market today.
  5. For more precise information on durability, concrete septic tanks that are correctly constructed have a lesser probability of breaking, cracking, or floating.

Check out these 6 septic systems available for your home.

Nowadays, most concrete septic tanks are sold with a two compartment design, as opposed to the earlier style one compartment tank that was more common previously. Two compartment tanks tend to perform a better job of filtering and separating waste than one compartment tanks, which is why septic experts advocate them over a single compartment tank. All compartments are constructed with access for cleaning and pumping, regardless of the number of compartments in the system. Because it can readily handle most 0-3 bedroom dwellings, a 1000 gallon septic tank is the standard size for domestic applications.

Heavy Duty Options

Many tanks are also available in “high duty” configurations, which generally have a reinforced top and bottom. Purchasing the heavy-duty version may be a wise decision in the case that a vehicle, agricultural equipment, or other large piece of heavy machinery passes over the tank area.

Installation Requirements

Because of the size and weight of concrete septic tanks, they must be installed by a qualified specialist. These tanks are constructed of the hardest materials available, and while they are extremely durable, their installation necessitates the use of enormous, heavy machinery. If the intended or present site of your concrete septic tank does not allow for heavy machinery access, you may want to investigate a fiberglass or plastic (polyethylene) tank.

Due to the fact that the majority of concrete tanks are precast, their sizes, weights, and dimensions are all different. However, keep in mind that all of these specs are approximations and are subject to change depending on state and local regulations.

Lifespan and Durability

The method by which the concrete septic tank was constructed will have an impact on its long-term function. High-quality concrete, adequate water sealing, and the use of structural steel goods such as mesh and rebar will provide additional support, strength, and structural integrity to the structure. Keep in mind that concrete septic tanks are more prone to cracking and leaking than their plastic and fiberglass equivalents when exposed to exceptionally cold temperatures and pressures. Most concrete septic tanks have a lifespan of up to 40 years if they are constructed properly and serviced on a regular basis.

1000 Gallon Concrete Septic Tank

Septic tanks of 1000 gallon capacity or larger are the most typical size for household usage, as they can readily fit most 0-3 bedroom dwellings. Size Weight: The weight of each concrete tank is different. Some of the most common 1000 gallon concrete precast tanks are around 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh almost 9,000 lbs. Others are approximately 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh almost 9,000 lbs. Here are some examples of Jensen Precast projects completed in various cities around the United States.

1250 Gallon Concrete Septic Tank

Generally speaking, a 1250 gallon tank is a good choice for mid-size homes with 3-4 bedrooms. Size and weight: The sizes and weights of all concrete tanks are different. 1250 gallon concrete precast tanks are typically 5′ 9″ x 8′ 6″ x 5’8″ in size, with some of the more common models being 5′ 9″ x 8′ 6″ and others measuring 5′ 8″. The typical weight of a 1250 gallon concrete tank is 11,000 lbs, however this might vary depending on the distributor. Approximately 11 1/2 feet in depth, however this varies according on the distributor, state, and local statutes.

1500 Gallon Concrete Septic Tank

Generally speaking, a 1500-gallon tank is the most popular size for large homes with five or more bedrooms. Size and weight: The sizes and weights of all concrete tanks are different. The dimensions of some of the most common 1500 gallon concrete precast tanks are around 6′ x 10′ 9″ x 5′ 5″ in length and width. The typical weight of a 1500 gallon concrete tank is 12,000 lbs, which is rather heavy. Approximately 12 feet in depth, however this varies according on the distributor, state, and local statutes.

Inlet Baffles

In summary, for big homes with more than five bedrooms, the 1500-gallon tank is the most popular option. Each concrete tank is unique in terms of dimensions and weight. One size for 1500 gallon concrete precast tanks is 6′ 9″ by 5′ 5″, which is about the same as for some of the most common sizes. The typical weight of a 1500-gallon concrete tank is 12,000 pounds.

Approximately 12 feet in depth, however this varies according on the distributor, state, and local statutes in effect. Filtration of solid waste items, oils, and scum from the effluent is aided by the use of input and output baffles.

  • The 1500-gallon tank is the most popular size for large homes with five or more bedrooms. Size and weight: The sizes of all concrete tanks are different. The dimensions of some of the most common 1500 gallon concrete precast tanks are around 6′ x 10′ 9″ x 5′ 5″ in size. The typical weight of a 1500 gallon concrete tank is 12,000 pounds. Approximately 12 feet in depth, however this varies according on the distributor, state, and local statutes. Baffles at the input and output of the system aid in the removal of solid waste debris, oils, and scum from the effluent.

Outlet Baffles

Every septic tank should be equipped with an exit baffle that is connected to the discharge line. The outlet baffle functions as a bottle neck in the same way as the inlet baffle, but in the opposite direction. It is meant to:

  • Preserving the septic tank by keeping scum, oils, and solid waste contained inside
  • It is necessary to prevent the discharge of waste items other than wastewater into the output pipe, drain field, and leach field.
See also:  How Much Should It Cost To Pump Out A Septic Tank? (Solved)

All effluent from the septic tank must be clear of solid waste before it may be discharged. Other than that, the solids and oils will pollute the drain field/leach field and result in backups and pollutants entering the surrounding environment. Ensure that your baffles are correctly built and that they are not in need of repair by consulting with a licensed septic technician before doing anything else. Septic tanks made of fiberglass or polyethylene (polyethelyene) are also a suitable option, especially if your location has specialized environmental requirements.

Mobility

In contrast to concrete septic tanks, which normally need a vehicle equipped with a crane and boom, fiberglass and polyethylene septic tanks are quite simple to transport. Therefore, fiberglass and plastic tanks are frequently employed in places where concrete septic tank delivery vehicles are unable to reach the tanks. The majority of fiberglass and plastic septic tanks weigh roughly 300 pounds or more, however concrete septic tanks can weigh up to 20-30 times as much.

Cost Effectiveness

If you’re seeking for a less expensive alternative to concrete, fiberglass and polyethylene (polyethylene) are excellent choices. The majority of fiberglass and plastic septic tanks are thousands of dollars less expensive than concrete septic systems.

Durability

When compared to a concrete septic tank, both plastic and fiberglass septic tanks have a lower likelihood of breaking. Furthermore, because fiberglass and plastic are nonporous materials, there is typically no problem with tree or bush roots growing into the tank and causing leaks through root damage. However, caution must be exercised during installation because heavy machinery can easily damage a tank due to its thinner profile and lighter material makeup. Fiberglass and plastic tanks, like concrete tanks, can be damaged if too much weight is placed on the surface above them.

Although plastic and fiberglass tanks are durable, they can still leak under certain conditions.

Lot size, tank placement, ground water levels, and weather can all have an impact on the final decision.

Float

Plastic and fiberglass have a number of advantages, but they can also be troublesome. Yes, the lightweight character of these materials makes them perfect for installation, but same lightweight nature also results in a high level of buoyancy in the final product. It is possible that during a storm, a plastic or fiberglass tank can get dislodged from its couplings, causing considerable damage to the septic system and the homeowner’s property, with repair costs in the hundreds of dollars. A simple solution is to place a concrete slab on top of the tank to help weigh it down.

If you reside in an area with a high groundwater table, consult with a specialist to ensure that the higher water table will not cause harm to your fiberglass or plastic tank.

Texas Precast

Plastic and fiberglass have a number of advantages, but they can also provide challenges. It is true that the lightweight character of these materials makes them excellent for installation; but, same lightweight nature also results in a high level of buoyancy. While driving during a storm, it is possible that a plastic or fiberglass tank can get dislodged from its couplings, causing substantial damage to the septic system and the homeowner’s property that would cost thousands of dollars to fix.

While building a concrete bed and tying it to a fiberglass/plastic septic tank for stability is commendable, it is a little ironic.

The Lowdown on 1000 gallon concrete septic tank,concrete septic tanks,1500 gallon septic tank,concrete septic tank,fiberglass septic tanks,how long do septic tanks last,septic tanks sizes,septic tank size,plastic septic tanks,how a septic system works,septic tank baffle,sizes of septic tanks,poly septic tank,septic tanks problems,types of septic tanks,

1000 – 1500 GPD Jet Aerobic Tank Package

Per day, it is capable of treating up to 1000 gallons of domestic wastewater. Pump tank with a capacity of 1000 gallons is included. Trash tank, Jet Aerator, Control Box, Water Pump, 3 Sprinklers, and Chlorine Tube are all included in the price.

Inlet Bottom 57″H
Outlet Bottom 54″H
Dimensions 120″L x 60″W x 70″H
Price $6,721.00
ONE COMPLETE JET AEROBIC PACKAGE LEFT
  • Riser extension with lid for the aerator
  • 1,000 gallon pump tank with lid
  • Total weight of 16,000-18,000 pounds
  • Jet aerator with control box. Pump for water
  • Three floats, a chlorine tube with eight to eighteen tabs
  • With lid, aerator riser can be used. Risers (at an additional expense if the garbage tank is deep)
  • Three spray heads
  • Three 4″ clamps

Jet Aerator Tank Lids

Pump tank with cover; 1,000 gallon aerator riser extension with lid; total weight of 16,000-18,000 lbs; jet aerator with control box Pumping water; With three floats and a chlorine tube containing between 8 and 18 tablets, With lid, aerator risers are used. If the garbage tank is particularly deep, rippers (at an additional expense) must be installed. A total of three spray heads and three 4″ clamps are included.

Inlet Bottom 51″H
Outlet Bottom 49″H
Dimensions 115″L x 60″W x 60″H
Price $750.00

500 Gallon Round Septic Tank (High/Low Holes)1

The holes in this tank are both high and low in elevation.

Inlet Bottom 51″H
Outlet Bottom 46″H
Dimensions 64″D x 61″H
Price $395.00

500 Gallon Round Septic Tank (2 Low Holes)2

High and low holes are present in this tank.

Inlet Bottom 46″H
Outlet Bottom 46″H
Dimensions 64″D x 61″H
Price $395.00

300 Gallon Square Septic Tank

Applications include septic tank and pump tank construction.

Inlet Bottom 51″H
Dimensions 115″L x 60″W x 60″H
Price $795.00

Concrete Risers

Dimensions 23″OD x 18″W x 9″H
Dimensions 23″OD x 18″W x 12″H
Dimensions 23″OD x 18″W x 15″H
Price $50.00

Water Well Risers (includes Lid)

Pump tank applications such as septic systems are possible.

Flat Tank Lids / Stepping Stones

It is also possible to utilize them as stepping stones.

Sprinkler Head Covers

The diagonal slopes are 3″ on both sides when there are two (2) holes on top.

Round Concrete Lids

Dimensions 64″D x 3″H
Dimensions 68″D x 3″H
Price $195.00

A/C Pads

Stiger Precast, Inc.17793 State Highway 231, Nevada, Ohio [email protected] Stiger Precast, Inc.17793 State Highway 231, Nevada, Ohio USA ALL TANKS HAVE BEEN APPROVED BY THE STATE.

  • 1000 Gallon, two-piece tank with one compartment
  • 1500 Gallon, two-piece tank with one or two compartments
  • 2000 Gallon, two-piece tank with one or two compartments
  • 3000 Gallon, two-piece tank with one compartment
  • Three-piece tank with two compartments, holding 2500 gallons. Tanks on special order are also available upon request. Reinforcement with wire mesh and/or fiber and steel rebar
  • The plastic riser is 20 inches in diameter and is cast straight into the concrete. Additional plastic risers may be simply added to bring the structure up to grade
  • Delivery to the location of the installation
  • The delivery fleet comprises entirely of 22-foot trucks equipped with knuckle boom cranes. Licenses and bonds are required.

For those instances where we are unable to get one of our concrete tanks to your location, we recommend that you look at our whole range of Infiltrator Triple Wall Poly Tanks, which can be transported with a truck trailer and erected with a small backhoe. For further information on dimensions and price, please call: 740-482-2313

Precast Septic Tanks, Lakeland, FL

As you might anticipate, septic tanks have undergone significant evolution throughout the years. Some improvements were developed with the intention of being more long-lasting, only to discover that they were not. Steel septic tanks, for example, were created with the expectation that they would be more robust than concrete ones. The acidity of the wastewater, on the other hand, rapidly proved to be an issue since the steel rusted quickly. Plastic items have also entered the scene, and they offer a number of advantages over other materials.

Look no farther than Averett Septic Tank Co Inc if you are searching for a dependable firm in theLakeland, Floridaarea that has expertise building and replacing precast septic tanks.

With us, you won’t have to look anywhere else for septic services for your house or company because we provide both residential and commercial services. There are several advantages to using precast septic tanks, including the following:

  • Because they are heavy, they will not rise to the surface over time like a buoyant object would. They do not corrode in the same way that steel septic tanks can, or in the same way that certain of the pieces in plastic and fiberglass tanks do. You won’t have to be concerned about your septic tank collapsing as it is emptied out
  • Instead, Concrete is ecologically friendly, and as a result, it will not pollute groundwater in the same way that other materials may. Plastic septic tanks are less durable than precast concrete ones, which means they can withstand greater weight.

Because they are heavy, they will not rise to the surface over time like a more buoyant object. The parts of plastic and fiberglass tanks do not corrode, as steel septic tanks do, nor do some of the components of plastic and fiberglass tanks. During the pumping process, you won’t have to be concerned about your septic tank failing. The fact that concrete is ecologically friendly means that it will not have an adverse effect on groundwater, as other materials may. Plastic septic tanks are less durable than precast concrete ones, which means they can carry greater weight over time.

Leave a Comment

Your email address will not be published. Required fields are marked *