Where To Buy A Septic Tank Riser? (TOP 5 Tips)

What is the best way to cover a septic tank?

  • Mulch can be added to the area covering the septic tank and drainfield if snow cover is inconsistent – especially if grass or other vegetation cover is not available. It is always best to limit any traffic on top of the drainfield (vehicular, human or animal).

How much do risers for a septic tank cost?

How Much Does a Riser Cost? Septic tank risers are not only convenient, but they are also cost-effective if you plan to say in your home for several years. Plastic septic tank risers typically cost $300 to $400 to install, parts and labor included.

What sizes do septic tank risers come in?

Typical septic tank riser diameter is 24-inches but 30-inch, 16-inch and other riser diameters are available. Risers are sold in varying heights from 6″ and up.

Should I install a riser on my septic tank?

Having a riser in place can also significantly reduce the cost of septic tank maintenance over time through the ease of access and time on the job saved. Plus you will be spared digging up your lawn every time as well.

Do they make square risers for septic tanks?

The Polylok square riser adapter ring is designed to connect the Polylok septic tank risers or lids to an existing concrete tank with large square or round openings.

Should I bury my septic tank lid?

A septic tank stores the solids from drains and needs to be pumped out about every two years, so it’s not a good idea to cover the area — you need to always be sure where to find the tank. Modern septic systems have an 8-inch plastic pipe that rises from the tank to a few inches above grade.

How do you hide a septic tank riser?

The easiest way to hide your septic riser is by simply placing something over it, such as a hollow, lightweight landscape rock, a birdbath, a sundial or a decorative lawn ornament. Apply basic landscaping principles when deciding what to use.

How many lids are on a septic tank?

A septic tank installed before 1975 will have a single 24-inch concrete lid in the center of the rectangle. A two-compartment tank installed after 1975 will have two lids of either fiberglass or polyethylene, centered at opposite ends of the rectangle.

Can you cover septic tank lids?

If you have a traditional septic system, the tank should be pumped every 3-5 years. That means that the septic lids should be accessible every 3-5 years. You can use almost any temporary, movable objects to cover your lids, like: Mulch (but not landscaping)

How far apart are septic tank lids?

The distance between lids will be different for each sized tank: 1000 gallon tank = 6-6.5 ft.; 1250 gallon = 7-7.5 ft.; 1500 gallon = 8.5-9 ft.. Dig up the outlet chamber access lid. If you are extraordinarily lucky, the as-built drawing is accurate and you have hit the lids spot on.

How do I find my septic tank lid?

You can locate the lid of your septic tank by poking the ground every few feet with a metal probe. Lids can be buried up to a foot deep on average, so be sure to investigate any bumps that may indicate something is buried underneath.

Septic tank riser kit Plumbing at Lowes.com

A leaking pipe is one of the most annoying things that can happen. When left ignored, they can become damaging over time, resulting in the need for costly repair work to be performed. However, with the appropriate expertise and the right plumbing gear, you can stop a leak before it causes extensive water damage that is expensive to repair. Identifying the Proper Fit Various pipe fittings will wear out over time and will need to be changed or repaired as a result. Lowe’s provides the pipe fittings you need for your project or repair, whether you’re looking for PVC or copper pipe fittings.

Large-scale projects or extensive repairs In some cases, you may require plumbing materials for more extensive repairs or replacements.

Our Water Heater Buying Guidecan assist you in determining which water heater is the best fit for your needs.

Troubleshooting Your Toilet Issues When it comes to plumbing problems in the home, one of the most frequently encountered is with the toilet, which is one of the most frequently used appliances.

In some cases, more than a plunger is required to solve the problem.

We also have whole toilet repair kits available, as well as individual toilet components such as flappers, chains, and levers.

The tools and skills you’ll need to address issues and complete projects correctly the first time are available at Lowe’s.

Septic Tank Risers, Lids, and Covers

Septic tank risers are intended to replace existing concrete, fiberglass, or metal septic tank lids by lowering the entrance to the ground level and allowing for better drainage. Want to stop digging up your yard every time you need to have your septic system cleaned, repaired, or re-filled with water? Do you despise having to lift and carry incredibly big concrete lids on your shoulders? It appears that you require septic tank risers to raise your access to ground level, as well as a lightweight, easily removable access cover.

We use high-quality, heavy-duty polyethylene plastic to construct our Polylok risers and lids, which allows them to be extremely robust and durable while also being lightweight and simple to handle. With the Polylok risers and lids from Septic Solutions, septic tank maintenance will be a breeze!

Septic tank risers are intended to replace existing concrete, fiberglass, or metal septic tank lids by lowering the entrance to the ground level and allowing for better drainage. Want to stop digging up your yard every time you need to have your septic system cleaned, repaired, or re-filled with water? Do you despise having to lift and carry incredibly big concrete lids on your shoulders? It appears that you require septic tank risers to raise your access to ground level, as well as a lightweight, easily removable access cover.

With the Polylok risers and lids from Septic Solutions, septic tank maintenance will be a breeze!

FREQUENTLY ASKED QUESTIONS

The following are some of the most commonly asked inquiries that our customer support representatives are asked. Take a peek below; it’s possible that the queries you have have been answered! Would the POLYLOK SEPTIC TANK LID fit directly on the ADAPTER RING, or will I need to use a RISER to ensure a proper fit on the tank? With the exception of the 24″ Heavy Duty Lid, the lid will often fit straight onto the adapter rings in the majority of cases. The underside of the 24″ Heavy Duty Lid is strengthened for added strength.

  1. Therefore, the 24″ Heavy Duty Lid will only be able to be used without using an adapter when the opening is at least 24″ in diameter.
  2. ALL other Polylok lids will attach straight to the adapter ring, eliminating the need for a riser or any other adaptor.
  3. No.
  4. Cutting the riser will result in the lid not being adequately secured on the riser that has been cut down.
  5. It is entirely up to you whether you want to bring the riser system up to grade, raise it above grade, or leave it slightly below grade.
  6. IS IT BETTER TO USE THE STANDARD LID OR THE HEAVY DUTY LID?
  7. If the riser system is located in a high traffic location or is going to be run over by lawn equipment on a frequent basis, the heavy duty lid is recommended.
  8. Yes.
  9. IS IT INCLUDED WITH THE POLYLOK SEPTIC TANK RISERS AND LIDS TO USE SCREWS?
  10. The Polylok Septic Tank Risers are assembled using stainless steel screws that allow them to be connected to one another.
See also:  What Does A Septic Tank Look Like In Yard? (Perfect answer)

THE POLYLOK SEPTIC TANK RISER ADVANTAGE

Riser systems are available in a variety of shapes, sizes, and designs on the market today. The Polylok septic tank risers are, without a doubt, the best money can buy in this category. There are several causes for this, but the following are the most significant:

FACTORY INSTALLED GASKETS

The Polylok brand is the only one on the market that is sent to you from the factory with gaskets already in place, making it unique. This means that there is no further work necessary to ensure that the riser system is air and water tight!

Keep ground water out of your tank, wastewater in your tank, and potentially hazardous gases out of your yard! In contrast to most other products, our Polylok septic tank risers do not require you to purchase or use any other type of sealant between each riser part.

INTERNAL STRUCTURAL RIBS

Pre-installed gaskets are included with every Polylok product, making it the only one on the market that does this. Because of this, there is no additional work needed to ensure that the riser system is airtight and watertight! This is critical in order to keep groundwater out of your tank, wastewater inside your tank, and potentially hazardous gases out of your yard! The majority of other solutions need you to purchase or apply some other type of sealant between each riser component, but with our Polylok septic tank risers, you won’t have to bother about that!

LOW PROFILE RISER LIDS WITH HANDLES

The septic tank access lid on a riser system is one of the most significant components since it is the part of the system that is visible from the outside and that must be removed every time the system is pumped or otherwise serviced. The Polylok lids are pre-installed with handles, which make it simple to remove the lid whenever you need to get access to the system or to replace it. The bottom of the lids is structurally supported, which allows them to remain relatively flat rather than domed in shape, as is the case with many other items on the market.

LARGE TANK ADAPTER RING

It is necessary to use an adapter ring in order to attach risers to your septic tank. We have one of the largest adapter rings available on the market, allowing you to cover up to a 25″ square or 27″ round opening with a Polylok adapter ring. This ring accepts both 20″ and 24″ risers, allowing you to have a great deal of flexibility no matter what size your opening happens to be!

STAINLESS STEEL SCREWS INCLUDED

At Septic Solutions, we strive to make the buying and installation process as simple as possible for our customers. All of our Polylok risers and lids are delivered with all of the stainless steel screws required for installation in one package.

Septic Tank Riser Kits – Wholesale Septic Supply

Are you fed up with having to dig up your septic system every time it has to be repaired or serviced? If this describes you, we have a fantastic option for you. In order to modify the way you operate on your septic system, you may require a suitable septic riser, which can be found online.

Why choose Tuf Tite Risers?

The Tuf Tite Septic Riser System allows you to get access to your outside septic system in a quick and simple manner. With the help of this revolutionary instrument, septic system service becomes a snap, and you will never have to dig up your septic system again! This system eliminates any guessing by providing you with the riser and other components you require to complete the task. Because you are ordering all of the essential parts in a single package, you will save both time and money on the installation process.

What are the Tuf Tite Product Specs?

Every riser system is simple to install on concrete septic tank lids, and the kit will even tell you what size access hole will work best with your septic system based on the information in the kit. The riser system is effective on 95 percent of septic systems with round diameter entrances ranging from 16 inches or less to 25 inches or less, and square sizes ranging from 11 inches by 11 inches to 18 inches by 18 inches. Looking for high-quality products? Look no further than this store! There are several sizes available for the Tuf Tite riser system, which has been engineered to last.

  1. Septic tanks are normally installed below the surface of the earth.
  2. Installing a riser kit is the most effective approach to deal with this issue.
  3. When the riser comes into contact with the tank, an adapter ring should be used to seal the connection.
  4. A number of risers will be stacked on top of each other and the adapter ring until they reach the ground level, at which point they will be removed.
  5. This method will establish a barrier around the tank, protecting it from contamination while also making access to the tank more convenient.
  6. In order to ensure that the circular riser will fit around your square or rectangular access port, there are a few things you may do.
  7. The diagonal distance across the access will be the longest distance that a riser will have to cover before it may be used.
  8. Assume that “a” is the length of one side of the port’s access.
  9. For example, A is 12 inches in length and B is 12 inches in length.
  10. The equations shown above can be used to estimate the diagonal distance of a rectangle in a rectangular coordinate system.
  11. The only risers that should be utilized are those having an inner diameter that is bigger than the diagonal distance between the access port and the wall.

This approach will need the knowledge of the lengths of each side of your rectangular access port in order to work. Pythagorean theorem is something you may remember from your geometry training.

Tuf-Tite Septic Tank Riser, 24’x12′ – – Amazon.com

5.0 stars out of 5 for this product It’s a good fit. On July 14, 2018, a review was conducted in the United States. All of the products in the shot were purchased by myself. I needed to install an RV sewer hookup, and this was the most environmentally friendly method. No more digging around for the lid when it comes to pump out time!

Top reviews from the United States

The overall rating is 5.0 out of 5. It’s a good combination. On July 14, 2018, it was reviewed in the United States. Every item in the photograph was purchased by me. Adding an RV sewer hookup was a must, and this was the most environmentally friendly method. No more digging around for the lid when it comes to pump out!

Amazon.com : septic tank riser kit

THE RESULTSPrice and other information may differ depending on the product size and color selected. There is a deal available for 10% off. Sketch was used to create this design. Sponsored SubscribeSave allows you to save even more money. Get it as soon as possible. Friday, February 18 Shipping is $21.29 per order. With the SubscribeSave discount, the price is $19.77. A 5% discount is applied at the time of purchase. With the coupon, you may save 5 percent. SubscribeSaveGet it allows you to save even more money.

  1. With the SubscribeSave discount, the price is $19.77.
  2. With the coupon, you may save 5 percent.
  3. SubscribeSave allows you to save even more money.
  4. At the time of purchase, a 6% discount is applied.
  5. With the SubscribeSave coupon, the price drops to $80.99.
  6. With the voucher, you may save $5.00.
  7. Only 15 of these items are left in stock – purchase soon.
See also:  How To Dissolve The Muck In A Septic Tank? (Question)

There are only 4 left in stock, so act quickly.

At the time of purchase, a $1.00 coupon is applied.

SubscribeSave allows you to save even more money.

At the time of purchase, a 6% discount is applied.

With the SubscribeSave discount, it’s only $18.00.

With the coupon, you may save $1.00.

There are only 10 left in stock, so place your purchase now.

Best Price on Septic Tank Risers & Covers Online Guarenteed!

Septic Tank Risers and Lids are available from TGWasteWater in a variety of sizes and styles. We also provide a large selection of accessories for our riser products. Are you fed up with having to pay to have your system dug up and pumped every time it needs to be refilled? Are your present concrete risers at danger of collapsing? Is it becoming tiresome to have to lift a hefty concrete cover every time you need to access your tank? It is possible that you responded yes to any of these questions and that you should think about putting a riser system on your septic tank.

Risers from Tuf-Tite and Polylok are available for purchase.

Please keep in mind that Tuf-TitePolylok products are incompatible with one another.

Consequently, if you want us to utilize a Tuf-Tite lid, you must purchase Tuf-Tite Risers, and the reverse is true. Do you have questions about how to build a riser on a septic system? PLEASE CLICK HERE TO READ OUR INSTRUCTION GUIDE ON HOW TO INSTALL RISERS ON A CONCRETE SEPTIC TANK

What You Should Know About Septic Tank Risers

Septic tank risers are an important part of any septic system, and they should be installed in every property. This article will provide you an overview of septic tank risers and how they may help your septic system. What Is the Function of a Septic Tank Riser? A septic tank riser is a conduit that connects your home’s surface drainage system to your septic tank beneath the ground level. An access port or the pump-out ports on the septic tank are where the riser connects to the tank. Septic tank risers are equipped with lids that can be quickly removed to allow you to check or pump your septic tank without having to dig up your yard.

  • These structures are often made of materials that disintegrate slowly over time, such as plastic or concrete.
  • What Are the Advantages of Using Risers?
  • Normally, this entails digging up your yard before the pump is installed and reburying the tank once it has been installed.
  • The use of a septic tank riser can help to minimize the amount of time spent pumping your septic tank.
  • The fact that the riser is visible above the surface of your yard makes it an ideal signal for locating your septic tank the first time you need to discover one in your yard.
  • For those who want to stay in their house for several years, septic tank risers are not only handy, but they are also cost-effective.
  • Concrete risers are more durable, but they are also more expensive, and the price will be determined by the quote you receive from the contractor who will be installing them.

Because labor expenses account for a large amount of the fees that contractors charge for septic system inspection and pumping, installing a riser may possibly reduce the future cost of septic service by as much as 50 percent.

Each and every property can profit from the installation of a septic tank riser, but this does not imply that you should do so immediately.

This allows for the installation of the pump and riser to be completed in a single step.

Because a riser should be considered a long-term investment, you should be certain that your tank is in good functioning shape before installing one.

A septic tank riser is a straightforward concept that may save you a significant amount of money and pain when it comes to septic system maintenance and repair.

We look forward to hearing from you and addressing any concerns you may have concerning your septic system requirements. Contact us now. Please let us know how we may be of assistance to you and your septic system right now!

What is Septic Tank Riser

If you are one of the twenty percent of houses in the United States who are not linked to a centralized sewer system, the likelihood is that you have a septic system installed in your yard. A septic system is a sewage maintenance system that is installed on-site. While you are no longer required to pay monthly sewer fees to your local municipality, you are still responsible for the upkeep and maintenance of your septic tank system. Septic Connection, for example, is an excellent choice for an experienced septic service company in your area.

  • Installation of an aseptic tankriser can help to reduce the amount of time spent on sewer maintenance.
  • Due to the fact that septic tanks are often constructed many yards below and even the lids are just a few feet deep, locating and reaching the tank lid may be a time-consuming and difficult task.
  • The installation of a septic tank riser is a cost-effective solution to this issue.
  • The Advantages and Disadvantages of a Septic Tank Riser The world is not full of rainbows and butterflies.
  • Septic tank risers are built of sturdy materials that protect the septic tank lid from the weather. They are installed on the outside of the tank. A septic tank riser not only makes the placement of your septic tank lid evident, but it also protects your septic tank against unintentional pressure buildup. It’s easy to lose track of where the septic tank is and end up parking your car over it or dumping heavy equipment on it, which is dangerous. A septic tank riser will keep your septic tank in the forefront of your thoughts
  • However, while some homeowners are concerned about the expense of installing a septic tankriser, the fact is that the process is rather straightforward. In addition, the expense is insignificant when compared to the long-term savings. With a septic tank riser, you will save both time and money during future septic system maintenance because your septic service provider will be able to find the tank and perform the necessary repairs more quickly
  • And The problem of aesthetics is also a source of concern for many homeowners. The fact that you do not want a pipe protruding from your property is totally understandable. If aesthetics are important to you, inform your septic tank riser installation professional so that they can ensure that the riser is installed such that the top of the riser is a few inches below the ground surface. By doing so, you may cover the surface with a thin layer of dirt and grass.
See also:  Why Does A Septic Tank Loses It'S Lid Lid Replacement? (Correct answer)

The Process of Locating a Reliable Septic Tank Riser Installer South Carolina-based Septic Connection is a fully licensed and insured firm with years of industry expertise, competent experts, and a professional staff. Our state-of-the-art equipment enables us to complete installations in a short amount of time and at a cost that is reasonable to our customers. So you never have to worry about dealing with septic difficulties on your own again, we offer emergency services around the clock. Are you ready to form a partnership?

Septic – Septic Risers & Covers – AK Industries Septic Tank Risers

  • Frequently Asked Questions
  • Shipping & Refunds
  • About Us
  • Contact Us
  • Drainage Blog
  • Terms and Conditions
  • Privacy Policy
  • Sitemap
Categories
  • The following are examples of drainage accessories: catch basins, grates, channel trench drain, fittings, valves, and erosion. Geotextiles are used for sediment control. Geogrids, landscape supplies, pipe, septic, tools, water filtration products, and well water products are some of the categories covered.
Popular Brands
  • Various1
  • NDS
  • Reed Manufacturing
  • Various2
  • Stegmeier LLC
  • Agri Drain
  • Normandy
  • PT Coupling
  • Various3
  • Fernco
  • View All
  • Various4
  • Various5
  • Various6
  • Various7
  • Various8
  • Various9
  • Various10
  • Various11
  • Various12
  • Various13
  • Various14
  • Various15
  • Various16
  • Various17
  • Various18
  • Various19
  • Various20
Subscribe to our newsletter

Receive the most up-to-date information on new goods and forthcoming discounts. Powered by BigCommerce, The Drainage Products Store provides a convenient online shopping experience.

Risers And Lids Installation – Septic Tank Risers And Lids In Springfield

Find out about new goods and upcoming discounts by subscribing to our newsletter. Drainage Products Store is powered by BigCommerce.

Dooley Service Pro

Dooley Service Pro’s team of septic professionals provides quality riser and lid installation to customers throughout the Miami Valley. For more information about this service or to book an examination to see if it is the best option for your septic system, please contact us right now!.

What is a Septic Tank Riser?

  • A septic tank riser is normally priced between $200 and $400, not including installation. Risers reduce labor expenses by saving septic contractors time
  • Therefore, they lower overall expenditures. The installation of a septic tank riser is not a do-it-yourself activity. Septic tank risers are available in both concrete and plastic construction.

Get quotations from as many as three professionals! Enter your zip code below to get matched with top-rated professionals in your area. If you’re a homeowner in the United States who relies on a septic tank, you’re probably aware that they’re buried deep in the earth and can be difficult to detect and access when it comes time to do maintenance on them.

As a result, you may be required to pay substantial digging and labor fees. With a septic tank riser, you can now find and manage your septic system more rapidly, which will allow you to put more money back in your pocket as a result. Listed here is all you need to know about septic tank risers.

What Is a Septic Tank Riser?

As the name implies, it is a long, robust pipe made of plastic or concrete that connects your septic tank, which is located deep below, with the surface of your lawn. The riser is connected to the septic tank by an access port or a pumping aperture in the tank’s wall. For inspection, maintenance, and pumping, risers have lids that can be opened without digging up your yard. This avoids the need to dig up your yard.

The Benefits: How Septic Risers Save You Money

As a rule of thumb, septic system manufacturers recommend that you examine your septic tank once a year and pump your septic tank every three to five years. However, if your septic system is not equipped with a riser, you may be forced to pay additional fees.

No Digging Fees

You or your septic tank specialist will have to spend time and money digging through the earth to locate your tank if you or he does not know the precise position of your tank. Your septic tank will need to be recovered with earth once it has been serviced and pumped without a riser, and they will need to do this every time they service your septic tank going forward.

Reduces Labor Costs

Incorporating an easily visible septic tank riser makes it easier for the contractor to access the riser lid, insert the pump hose, and start to work more quickly and efficiently. In this case, they may leave their heavy equipment at home, which saves you from having to spend a large amount of money in labor.

You’ll Only Pay for Materials and Labor Once

When you have a septic tank riser installed, you will only be responsible for the labor and materials used in the installation. The money you save on yearly inspections and regular local maintenance will more than compensate for the cost of the septic tank riser over time.

Septic Tank Riser Styles

Image courtesy of Ekaterina / Adobe Stock Septic tank risers are available in a variety of concrete and plastic types ranging in size from eight to 24 inches. Each style has its own set of pros and disadvantages.

Concrete Septic Tank Risers

Concrete septic tank risers are more durable than other materials, but they have certain drawbacks of their own. Pros:

  • Depending on how well it is maintained and drained, it can endure for 40 years. Septic tank risers made of steel are more durable than those made of plastic. Maintenance is less involved than with plastic
  • Difficult to install
  • s Expensive to buy
  • Vulnerable to corrosion and cracking over time
  • Increased labor costs due to the need to lift and maneuver during installation or inspection

Plastic Septic Tank Risers

Plastic septic tank risers are available in a variety of materials, including PVC and polyethylene, among others. Pros:

  • Purchase and installation costs are less expensive than those of concrete. Transport does not necessitate the use of large equipment. When compared to concrete septic tank risers, they are lighter in weight
  • They may be covered with sod to improve their looks
  • It is not susceptible to cracking like cement. Plastic is resistant to erosion.
  • It is possible to crush it beneath the earth
  • However, it is not as durable as concrete. Maintenance is more difficult to keep up with than with plastic.

How Much a Septic Tank Riser Costs

Installing a septic tank riser will cost between $200 and $400. Double septic tank risers will cost you twice as much as a single riser. It is more expensive to build concrete risers than it is to install plastic risers because of the weight of the concrete risers and the equipment necessary for installation.

Installation Usually Requires a Plumber

In part due to the difficulty of septic tank installation, it is not recommended as a Do It Yourself job. While it is possible to purchase all of the supplies for a DIY installation on the internet, there are several safety dangers associated with doing so. Opening a septic tank access can result in the emission of poisonous fumes, which can cause someone to go unconscious. Additionally, without prior experience, waterproofing and ensuring that the risers are properly connected together might be difficult.

They’ll dig up the area surrounding the access hole, then fill up the dirt around the pipe and install a cap on the upper section of the riser to make it easier to get to the pipe in the future.

Leave a Comment

Your email address will not be published. Required fields are marked *