What Is The Cost Of A Septic Tank Riser? (Question)

How Much Does a Riser Cost? Septic tank risers are not only convenient, but they are also cost-effective if you plan to say in your home for several years. Plastic septic tank risers typically cost $300 to $400to install, parts and labor included.

  • A septic tank riser costs between $300 and $400. Many consider it advantageous despite the price because it gives the maintenance crew easy access to the septic tank for any repairs that are required as well as for maintenance checks.

Are septic risers worth it?

Having a riser in place can also significantly reduce the cost of septic tank maintenance over time through the ease of access and time on the job saved. Plus you will be spared digging up your lawn every time as well.

How much is a concrete septic tank riser?

The cost of a septic tank riser can vary, depending on the size, the material, the style, and your installer. Plan on spending at least $150 for a basic model, but know that they can cost up to $400, depending on the model you choose.

Should septic tank riser be above ground?

Landscaping Around Septic Tank Risers However, septic tank risers should never be buried. Instead, they should be 2 inches above final grade to prevent groundwater from entering the system.

How many septic tank risers do I need?

A single riser is required for accessing the pump chamber for this type of system. If you don’t have two additional risers, you should locate your septic tank and install risers for both the inlet and outlet openings, as described above.

Can you bury septic lid?

Dig Up The Lids In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground. You can use a metal probe to locate its edges and mark the perimeter. If you do not find the lid by probing, shallow excavation with a shovel along the tank’s perimeter should reveal the lid.

How much does a septic tank lid weigh?

The concrete covers also weigh 60 – 80 lbs. Because of the weight, many people are discouraged from removing the cover and doing an inspection. Modern plastic septic tank riser rings typically weigh less than 30 pounds.

How many lids are on a septic tank?

A septic tank installed before 1975 will have a single 24-inch concrete lid in the center of the rectangle. A two-compartment tank installed after 1975 will have two lids of either fiberglass or polyethylene, centered at opposite ends of the rectangle.

Do they make square risers for septic tanks?

The Polylok square riser adapter ring is designed to connect the Polylok septic tank risers or lids to an existing concrete tank with large square or round openings.

How do you hide a septic tank riser?

The easiest way to hide your septic riser is by simply placing something over it, such as a hollow, lightweight landscape rock, a birdbath, a sundial or a decorative lawn ornament. Apply basic landscaping principles when deciding what to use.

What You Should Know About Septic Tank Risers

Garbage disposals are not recommended for those who reside in septic tanks. It is likely that more frequent septic tank pumping would be required, and that the extra solid waste material may erode the drain field, perhaps resulting in sewage back ups. Because septic systems are installed in certain homes, you may need to be more selective about what you flush down the toilet. Clogging, backups, and even system damage can occur when certain common household objects are flushed down the toilet of a home with a septic system.

Make sure to exercise caution when handling the following everyday home items: Products for female genital hygiene Wipes that may be disposed of in the toilet Paper towels are a type of paper that is used for wiping surfaces such as countertops and tables.

Water surface and groundwater can be badly harmed or contaminated by chemicals, resulting in disease or even death in animals and humans.

The following are examples of painting materials: colors, varnishes, thinners, and so on.

What is a Septic Tank Riser?

  • Unless you reside in a septic-system home, it is better not to have a trash disposal. The increased volume of solid waste material will necessitate more frequent septic tank pumping and may erode the drain field, resulting in sewage backups. Because septic systems are installed in certain homes, you may need to be more cautious about what you flush down the toilet. Certain common home objects, when flushed down a toilet connected to a septic system, can create clogs, backups, and even system damage, resulting in not only discomfort and stress, but also a significant financial outlay. Precaution should be exercised while using the following common home items: sanitary goods for women Wipes that are flushable Paper towels are a type of paper that is used to clean up after yourself. Tissues Bandages grinds from a coffee machine DiapersCigarettes Never flush chemicals down the toilet if you’re utilizing a septic system! Chemicals may cause significant damage and contamination to surface and groundwater, resulting in disease or even death in animals and humans. Take care to dispose of the compounds mentioned below in certified hazardous waste depositories: Thinners, stains, and varnishes are all types of paint. Pesticides Oils Chemicals for photography

Get quotations from as many as three professionals! Enter your zip code below to get matched with top-rated professionals in your area. If you’re a homeowner in the United States who relies on a septic tank, you’re probably aware that they’re buried deep in the earth and can be difficult to detect and access when it comes time to do maintenance on them. As a result, you may be required to pay substantial digging and labor fees. With a septic tank riser, you can now find and manage your septic system more rapidly, which will allow you to put more money back in your pocket as a result.

What Is a Septic Tank Riser?

As the name implies, it is a long, robust pipe made of plastic or concrete that connects your septic tank, which is located deep below, with the surface of your lawn. The riser is connected to the septic tank by an access port or a pumping aperture in the tank’s wall. For inspection, maintenance, and pumping, risers have lids that can be opened without digging up your yard. This avoids the need to dig up your yard.

The Benefits: How Septic Risers Save You Money

As a rule of thumb, septic system manufacturers recommend that you examine your septic tank once a year and pump your septic tank every three to five years. However, if your septic system is not equipped with a riser, you may be forced to pay additional fees.

No Digging Fees

You or your septic tank specialist will have to spend time and money digging through the earth to locate your tank if you or he does not know the precise position of your tank.

Your septic tank will need to be recovered with earth once it has been serviced and pumped without a riser, and they will need to do this every time they service your septic tank going forward.

Reduces Labor Costs

Incorporating an easily visible septic tank riser makes it easier for the contractor to access the riser lid, insert the pump hose, and start to work more quickly and efficiently. In this case, they may leave their heavy equipment at home, which saves you from having to spend a large amount of money in labor.

You’ll Only Pay for Materials and Labor Once

When you have a septic tank riser installed, you will only be responsible for the labor and materials used in the installation. The money you save on yearly inspections and regular local maintenance will more than compensate for the cost of the septic tank riser over time.

Septic Tank Riser Styles

Image courtesy of Ekaterina / Adobe Stock Septic tank risers are available in a variety of concrete and plastic types ranging in size from eight to 24 inches. Each style has its own set of pros and disadvantages.

Concrete Septic Tank Risers

Concrete septic tank risers are more durable than other materials, but they have certain drawbacks of their own. Pros:

  • Depending on how well it is maintained and drained, it can endure for 40 years. Septic tank risers made of steel are more durable than those made of plastic. Maintenance is less involved than with plastic
  • Installing it is difficult, and purchasing it is expensive. Over time, it becomes more susceptible to corrosion and cracking. Increased labor expenses due to the need to lift and maneuver during installation or inspection

Plastic Septic Tank Risers

Purchased at a high price and difficult to install Over time, it becomes more prone to corrosion and cracking. Lifting and maneuvering during installation or inspection will incur additional labor charges.

  • Purchase and installation costs are less expensive than those of concrete. Transport does not necessitate the use of large equipment. When compared to concrete septic tank risers, they are lighter in weight
  • They may be covered with sod to improve their looks
  • It is not susceptible to cracking like cement. Plastic is resistant to erosion.
  • It is possible to crush it beneath the earth
  • However, it is not as durable as concrete. Maintenance is more difficult to keep up with than with plastic.

How Much a Septic Tank Riser Costs

Installing a septic tank riser will cost between $200 and $400. Double septic tank risers will cost you twice as much as a single riser. It is more expensive to build concrete risers than it is to install plastic risers because of the weight of the concrete risers and the equipment necessary for installation.

Installation Usually Requires a Plumber

In part due to the difficulty of septic tank installation, it is not recommended as a Do It Yourself job. While it is possible to purchase all of the supplies for a DIY installation on the internet, there are several safety dangers associated with doing so. Opening a septic tank access can result in the emission of poisonous fumes, which can cause someone to go unconscious. Additionally, without prior experience, waterproofing and ensuring that the risers are properly connected together might be difficult.

They’ll dig up the area surrounding the access hole, then fill up the dirt around the pipe and install a cap on the upper section of the riser to make it easier to get to the pipe in the future.

How much does it cost to install septic riser? – Kitchen

For those who want to stay in their house for several years, septic tank risers are not only handy, but they are also cost-effective. In most cases, the cost of installing a plastic septic tank riser is between $300 and $400, including components and labor.

How much is a concrete septic tank riser?

Depending on the size, the material, the design, and the installation, the cost of a septic tank riser can vary significantly. Be prepared to invest at least $150 for a basic model, but keep in mind that they can cost anywhere from $150 to $400 depending on the type you pick.

How many risers should a septic tank have?

For this sort of system, only a single riser is necessary for access to the pump chamber and the reservoir.

For septic tanks that do not have two extra risers, you should locate your septic tank and install risers for both the inlet and outlet ports as explained above.

How much does it cost to install septic riser?

How Much Does a Riser Set You Back? For those who want to stay in their house for several years, septic tank risers are not only handy, but they are also cost-effective. Plastic septic tank risers are commonly installed for $300 to $400, which includes all components and labor costs.

See also:  How Much To Inspect A Septic Tank That Has Never Been Used? (TOP 5 Tips)

How do you install a concrete riser on a septic tank?

Installing Risers in a Septic Tank is a simple process.

  1. Step 1 – Collect the components you’ll need
  2. Step 2 – Vacuum the top of your septic tank
  3. And Step 3 – Attach the Butyl Rope to the Tank Adapter Ring (optional). Step 4 – Place the Adapter Ring around the hole and screw it down
  4. Step 5 – Attach Butyl Rope to the bottom of each Riser
  5. Step 6 – Attach the Risers and Lids to the Adapter Ring
  6. Step 7 – Attach the Risers and Lids to the Adapter Ring

Should septic tank riser be above ground?

Landscaping around septic tank recirculation valves Septic tank risers, on the other hand, should never be buried. To avoid groundwater entering the system, they should be 2 inches above final grade rather than 2 inches below final grade.

Why does my septic tank have 2 lids?

What is the purpose of having two lids on a septic tank? Pumping should be simple and convenient for both parties. The lid of the second chamber may be buried deeper than the lid of the first chamber on some occasions. It is possible that the pump will believe that there is only one chamber to pump as a result of this.

How do you hide a septic tank riser?

Riser Covers are used to protect the risers from damage. One of the most straightforward ways to conceal your septic riser is to just place something over it. Examples include a hollow, lightweight landscaping rock, a birdbath, a solar-powered sundial, or a colorful lawn ornament. When determining what to utilize, keep in mind some fundamental landscaping concepts.

How do you measure a septic tank riser?

Measure the diameter of the manhole cover: If it is between 26 and 29 inches in diameter, the riser will be able to fit into the tank entrance. Measure the distance from the ground to the top of the septic tank and add 3 inches to the total distance measured. If the distance between the two points is greater than 29 inches, a 3-foot square fiberglass plate (with a 22-inch hole in the middle) is required.

Septic Tank Risers

In what capacity does an aseptic tank riser serve, and why would you require one? If your septic tank service worker has to dig up your yard every time your septic tank has to be cleaned, you do not have a riser built, and it is probable that you have a concrete cover buried someplace underground. The Ariser septic tank lid replaces your old septic tank lid, allowing you to access your tank from aboveground, making it easier to manage. It is possible that installing a riser will lower the cost of pumping your tank (this is not a guarantee; be sure to inquire).

It may even be possible to gain access to your septic main for cleaning and inspection depending on your external pipe system.

However, if you have an older system, the majority of tanks were built with concrete lids that frequently degrade and are typically buried beneath the earth.

Most septic pumping companies also provide riser installation, and it is typically less expensive to consolidate services rather than buy them separately because you save on service fees by doing so.

Septic Tank Riser Styles

Septic tank risers are available in a variety of designs and are composed of a variety of various materials, including concrete. Despite the fact that some are built of concrete (which are the most durable), some people find them ugly. Concrete risers are more difficult to construct and may need the use of special equipment to lift them off trucks, increasing the labor costs even if the materials are less expensive. Septic covers made of polyethylene, PVC, and other plastic materials are lower in weight and come in a variety of heights to meet your demands.

  1. The majority of designs may be made to fit your specific height requirements.
  2. It should be noted that the load-bearing capacities of the lids varies.
  3. Riser pipes are available in a variety of sizes ranging from 8 to 24 inches in diameter, with lengths varying based on the depth of your tank entrance.
  4. Although it is possible to cover them with sod and mark their location in order to be able to raise them for maintenance, this defeats the point of accessibility and may lose you of the potential savings that come from not having to dig out your cover every time it has to be serviced.

Septic Tank Riser Cost

Depending on the size, the material, the design, and the installation, the cost of a septic tank riser can vary significantly. Spend at least $150 on a basic model, but keep in mind that they may cost up to $400 depending on the model you select. If you have a twin septic tank, double the above figure by two. The labor and supplies are one-time expenses that will be soon recouped by not having to pay for digging when you want pumping or inspections of your system. Most of the time, they can be installed in a half-hour or less.

How much are septic tank risers?

Asked in the following category: General 10th of June, 202024×12 Tuf-Tite Septic Tank Riser (Last Updated: 10th of June, 2020) Septic tank risers are often built of polyethylene, polyvinyl chloride (PVC), or concrete. However, while concreterisers are the cheapest (about $100), they are also the most heaviest and trickiest to install. Arisers manufactured of polyethylene or PVC will normally cost between $200 and $300, depending on their size and complexity. In the same vein, how heavy is a septic tank lid?

  1. The new covers are lightweight, weighing less than ten pounds, making maintenance on your tank considerably simpler.
  2. The concrete coverings are similarly heavy, weighing between 60 and 80 pounds.
  3. The riser of an aseptic tank is a concrete or plastic pipe that extends vertically from the pump-out holes or access ports at the top of the tank to about ground level.
  4. Is it necessary to install a septic tank riser?

It is now standard practice to build septic tank risers with contemporary septic systems, and for good reason. Septic tank risers make it easier to reach your septic tank from the ground level and provide better view into the operation of your septic system.

How much does it cost to install septic riser?

Asked in the following category: General The most recent update was made on April 23, 2020. Installing a septictankriser will allow you to get access to your septictank from the ground level by constructing a piped shaft from the top of the tank to the ground level of your property. Ariserwill cost you around $300 to $400 to install, but it will be well worth it to provide maintenance crews with quick access should it require repairs or maintenance. An aseptictankriser is a pipe that can be built of plastic, fiberglass, or concrete, depending on the use.

  1. The lid is then either left uncovered or covered with a very thin layer of soil and grass, depending on the preference of the gardener.
  2. This is a must-have if you want to get to your septic tank quickly for maintenance.
  3. I used an adapter ring to attach the tank risers to the septic tank.
  4. In light of this, how do you go about installing a septic tank riser?
  1. Step 1 – Collect the components you’ll need
  2. Step 2 – Vacuum the top of your septic tank
  3. And Step 3 – Attach the Butyl Rope to the Tank Adapter Ring (optional). Step 4 – Place the Adapter Ring around the hole and screw it down
  4. Step 5 – Attach Butyl Rope to the bottom of each Riser
  5. Step 6 – Attach the Risers and Lids to the Adapter Ring
  6. Step 7 – Attach the Risers and Lids to the Adapter Ring

How much does it cost to maintain a septic system? A 1,500-gallon tank would most certainly be required for a house with five or more bedrooms, and this will cost between $15,000 and $25,000. According on the size and complexity of the work, the cost to replace an old septic system ranges from $3,000 to $7,000 (USD).

Best Price on Septic Tank Risers & Covers Online Guarenteed!

Septic Tank Risers and Lids are available from TGWasteWater in a variety of sizes and styles. We also provide a large selection of accessories for our riser products. Are you fed up with having to pay to have your system dug up and pumped every time it needs to be refilled? Are your present concrete risers at danger of collapsing? Is it becoming tiresome to have to lift a hefty concrete cover every time you need to access your tank? It is possible that you responded yes to any of these questions and that you should think about putting a riser system on your septic tank.

  1. Risers from Tuf-Tite and Polylok are available for purchase.
  2. Please keep in mind that Tuf-TitePolylok products are incompatible with one another.
  3. Consequently, if you want us to utilize a Tuf-Tite lid, you must purchase Tuf-Tite Risers, and the reverse is true.
  4. PLEASE CLICK HERE TO READ OUR INSTRUCTION GUIDE ON HOW TO INSTALL RISERS ON A CONCRETE SEPTIC TANK

Septic Tank Risers, Lids, and Covers

Septic tank risers are intended to replace existing concrete, fiberglass, or metal septic tank lids by lowering the entrance to the ground level and allowing for better drainage. Want to stop digging up your yard every time you need to have your septic system cleaned, repaired, or re-filled with water? Do you despise having to lift and carry incredibly big concrete lids on your shoulders? It appears that you require septic tank risers to raise your access to ground level, as well as a lightweight, easily removable access cover.

We use high-quality, heavy-duty polyethylene plastic to construct our Polylok risers and lids, which allows them to be extremely robust and durable while also being lightweight and simple to handle. With the Polylok risers and lids from Septic Solutions, septic tank maintenance will be a breeze!

Septic tank risers are intended to replace existing concrete, fiberglass, or metal septic tank lids by lowering the entrance to the ground level and allowing for better drainage. Want to stop digging up your yard every time you need to have your septic system cleaned, repaired, or re-filled with water? Do you despise having to lift and carry incredibly big concrete lids on your shoulders? It appears that you require septic tank risers to raise your access to ground level, as well as a lightweight, easily removable access cover.

With the Polylok risers and lids from Septic Solutions, septic tank maintenance will be a breeze!

FREQUENTLY ASKED QUESTIONS

Existing concrete, fiberglass, or metal septic tank lids can be replaced with septic tank risers, which provide for easier access to the tank from the ground. Want to stop digging up your yard every time you need to have your septic system cleaned, repaired, or re-charged? Having to deal with really hefty concrete lids isn’t something you look forward to. Your septic tank risers should be installed to raise the access cover down to ground level, allowing you to remove it quickly and easily. Our Polylok risers and lids are constructed of high-quality, heavy-duty polyethylene plastic, which allows them to be both sturdy and durable while also being lightweight and simple to move about.

See also:  1500 Gal Septic Tank Can Accommodate What Size House? (Solved)

Existing concrete, fiberglass, or metal septic tank lids can be replaced with septic tank risers, which provide for easier access to the tank from the ground.

Having to deal with really hefty concrete lids isn’t something you look forward to.

Our Polylok risers and lids are constructed of high-quality, heavy-duty polyethylene plastic, which allows them to be both sturdy and durable while also being lightweight and simple to move about.

THE POLYLOK SEPTIC TANK RISER ADVANTAGE

Riser systems are available in a variety of shapes, sizes, and designs on the market today. The Polylok septic tank risers are, without a doubt, the best money can buy in this category. There are several causes for this, but the following are the most significant:

FACTORY INSTALLED GASKETS

The Polylok brand is the only one on the market that is sent to you from the factory with gaskets already in place, making it unique. This means that there is no further work necessary to ensure that the riser system is air and water tight! Keep ground water out of your tank, wastewater in your tank, and potentially hazardous gases out of your yard! In contrast to most other products, our Polylok septic tank risers do not require you to purchase or use any other type of sealant between each riser part.

INTERNAL STRUCTURAL RIBS

Pre-installed gaskets are included with every Polylok product, making it the only one on the market that does this. Because of this, there is no additional work needed to ensure that the riser system is airtight and watertight! This is critical in order to keep groundwater out of your tank, wastewater inside your tank, and potentially hazardous gases out of your yard! The majority of other solutions need you to purchase or apply some other type of sealant between each riser component, but with our Polylok septic tank risers, you won’t have to bother about that!

LOW PROFILE RISER LIDS WITH HANDLES

The septic tank access lid on a riser system is one of the most significant components since it is the part of the system that is visible from the outside and that must be removed every time the system is pumped or otherwise serviced. The Polylok lids are pre-installed with handles, which make it simple to remove the lid whenever you need to get access to the system or to replace it.

The bottom of the lids is structurally supported, which allows them to remain relatively flat rather than domed in shape, as is the case with many other items on the market.

LARGE TANK ADAPTER RING

It is necessary to use an adapter ring in order to attach risers to your septic tank. We have one of the largest adapter rings available on the market, allowing you to cover up to a 25″ square or 27″ circular aperture with a Polylok adapter ring. This ring fits both 20″ and 24″ risers, allowing you to have a great deal of versatility no matter what size your opening happens to be!

STAINLESS STEEL SCREWS INCLUDED

At Septic Solutions, we strive to make the buying and installation process as simple as possible for our customers. All of our Polylok risers and lids are delivered with all of the stainless steel screws required for installation in one package.

Septic Tank Riser Kits – Wholesale Septic Supply

Are you fed up with having to dig up your septic system every time it has to be repaired or serviced? If this describes you, we have a fantastic option for you. In order to modify the way you operate on your septic system, you may require a suitable septic riser, which can be found online.

Why choose Tuf Tite Risers?

The Tuf Tite Septic Riser System allows you to get access to your outside septic system in a quick and simple manner. With the help of this revolutionary instrument, septic system service becomes a snap, and you will never have to dig up your septic system again! This system eliminates any guessing by providing you with the riser and other components you require to complete the task. Because you are ordering all of the essential parts in a single package, you will save both time and money on the installation process.

What are the Tuf Tite Product Specs?

Every riser system is simple to install on concrete septic tank lids, and the kit will even tell you what size access hole will work best with your septic system based on the information in the kit. The riser system is effective on 95 percent of septic systems with round diameter entrances ranging from 16 inches or less to 25 inches or less, and square sizes ranging from 11 inches by 11 inches to 18 inches by 18 inches. Looking for high-quality products? Look no further than this store! There are several sizes available for the Tuf Tite riser system, which has been engineered to last.

  1. Septic tanks are normally installed below the surface of the earth.
  2. Installing a riser kit is the most effective approach to deal with this issue.
  3. When the riser comes into contact with the tank, an adapter ring should be used to seal the connection.
  4. A number of risers will be stacked on top of each other and the adapter ring until they reach the ground level, at which point they will be removed.
  5. This method will establish a barrier around the tank, protecting it from contamination while also making access to the tank more convenient.
  6. In order to ensure that the circular riser will fit around your square or rectangular access port, there are a few things you may do.
  7. The diagonal distance across the access will be the longest distance that a riser will have to cover before it may be used.
  8. Assume that “a” is the length of one side of the port’s access.
  9. For example, A is 12 inches in length and B is 12 inches in length.
  10. The equations shown above can be used to estimate the diagonal distance of a rectangle in a rectangular coordinate system.
  11. The only risers that should be utilized are those having an inner diameter that is bigger than the diagonal distance between the access port and the wall.

This approach will need the knowledge of the lengths of each side of your rectangular access port in order to work. Pythagorean theorem is something you may remember from your geometry training.

24″x 20″ Septic Tank Riser Kit – Wholesale Septic Supply

The inner diameter and height of our septic tank riser kits are specified in millimeters. Each of their names has two numbers: the first represents their inner diameter in inches, and the second represents their height in inches. That is, an inner diameter of 24 inches and a height of 20 inches are measured by a 24″x20″ riser kit, respectively. The bottom ring of the riser kit is responsible for attaching the assembly to the septic tank’s flanged bottom. The region around the access port must be large enough to allow for effective attachment of the ring to the septic tank.

  1. This means that the greatest distance across the access port must be 24 inches or less, and the top of the septic tank must be large enough to allow a ring with an outer diameter of 30 inches to seal to the tank’s top surface.
  2. P/N: 2420srsflat (Single Room) 2420srsdome is the part number.
  3. * If you want to switch from a domed lid to a flat lid, there is an additional price.
  4. Preparation for the installation of your new riser kit includes the removal of any concrete covers.
  5. If the wrong size is ordered, the client is responsible for the cost of return postage.

How much does a septic riser cost?

The average cost in the United States is $3,918. Septic tank risers are often built of polyethylene, polyvinyl chloride (PVC), or concrete. However, while concreterisers are the cheapest (about $100), they are also the most heaviest and trickiest to install. Arisers manufactured of polyethylene or PVC will normally cost between $200 and $300, depending on their size and complexity. One can also wonder, what exactly is a riser in a septic system. The riser of an aseptic tank is a concrete or plastic pipe that extends vertically from the pump-out holes or access ports at the top of the tank to about ground level.

People frequently inquire as to how many risers should be there in a septic tank.

First, I attached a 24 x 12tank riser first, then a second 24 x 6tank riserfor more height, and lastly a 24 inch flat lid.

You’ll never have to dig yourself out of a hole again.

Septic tank costs can range from as little as $600 to as much as $1,500. Plastic septic tanks ranging in size from 750gallons to 1,500gallons cost between $500 and $1500. Concrete septic tanks ranging in size from 750 to 3,000 liters cost between $1,300 and $5,000.

Septic Tank Riser? (how much, tanks, install, cleaning) – House -remodeling, decorating, construction, energy use, kitchen, bathroom, bedroom, building, rooms

Please registerto participate in our discussions with 2 million other members – it’s free and quick! Some forums can only be seen by registered members. After youcreate your account, you’ll be able to customize options and access all our 15,000 new posts/day with fewer ads.

Location: Atlanta, GA1,123 posts, read6,205,440timesReputation: 561
Has anyone had any experience with having a riser installed on their septic tank to allow for easier access for pumping?How much did it cost to have a PVC riser added?My tank is about 3-4″ under ground, and having the backhoe tear up my yard every 3-5 years is not appealing, therefore I was thinking about adding a riser/manhole.any thoughts/experience on this?
Location: Wilkes-Barre,Pa272 posts, read943,172timesReputation: 132
I just had mine done a few years back, I had new concret lid with a concret riser installed, I think it was $200, the guys that pump the tanks, like a big riser, it makes it easier to get everthing out.
Location: Las Vegas3,631 posts, read6,875,020timesReputation: 4364
JMHO.I would rather deal with the yard being torn up once every few years than see a lid everyday.Oh the other hand it does make access MUCH easier.
Find out if it will even make a difference. When we bought our house, we had to pay the inspector to find the septic. After moving in I had a company come out to install a riser since I did not want to pay for the “finders fee” each time I had my septic cleaned. Turns out I already had a riser. Even with the riser our lid is a couple of inches below the dirt. The houses we had looked previously had risers above the dirt. So I scrap the grass off the lid before the septic guys show up to avoid the fee.
Location: Atlanta, GA1,123 posts, read6,205,440timesReputation: 561
Quote:Originally Posted bySoHoVeJMHO.I would rather deal with the yard being torn up once every few years than see a lid everyday.Oh the other hand it does make access MUCH easier.I’m kind of torn on it.I think I could disguise the lid pretty well with where it would be situated with some plantings and pine straw, but I got a very rough estimate from my septic company and they quoted $1k!That seems kind of steep for me right now, perhaps I will wait 5 years till I need to pump it again and then just knock it out then.
08-04-2010, 04:35 PM
I wanted mine done right, had a few low quotes for a bandaid type install around 600.got it dont right for 1500, they dug it off, cut a hole in tank, conretd a riser in place, and attached a secure lid. My pump guy was impressed! No more digging tank up ruining my grass, and e-z access for pump guy. And my kids cant fall in or open!
Location: Indianapolis4 posts, read25,887timesReputation: 15
Does anyone know.if I was able to secure a copy of the permit with the drawing of both well and septic, would this be sufficient in helping the septic guy gain access?
Location: 2016 Clown Car.fka: Wisconsin738 posts, read916,597timesReputation: 1201
I’ve owned 5 homes during my lifetime and each one was in a rural community and had a septic tank.On each one, I had risers installed.The current one hastworisers.To disguise the covers, we did a bit of landscaping that included edging and then filled in the area with colored, crushed stone.The risers are also covered, but only lightly and then large pots filled with plantings are set on top of the stone.In order to access the covers, I simply brush aside the stone, unlock the cover and allow the pumper to do his job.Because our tank is located in a really, really inconvenient place in our yard, this was the best solution.And having lived with so many tanks in so many yards, I seriously do not even notice it anymore.RVcook
I grew up in a house with well and septic.I’ve been surprised by the number of people that say they have to pump their septic tank on a regular (every couple years) basis.I thinkwe had ours pumped once in 10 years or so and that was because the old metal tank (installed in the 1930s) was failing (rotted through0 we replaced it with a new concrete tank and then went I think 15 years or more without aving a problem.As I understand it people need to pump because they don’t watch what they ‘feed’ into the tank.You put in chemicals that kill the bacteria and it doesn’t processthe waste.The funny thing is that now I hear of major sewer systems developing plans to limit what gets flushed down the toilet.No old medicine, cleaning chemicals, baby wipes, none of this went down at our house.Then again maybe we were just lucky:-)
Location: 2016 Clown Car.fka: Wisconsin738 posts, read916,597timesReputation: 1201
Quote:Originally Posted byMidValleyDadI grew up in a house with well and septic.I’ve been surprised by the number of people that say they have to pump their septic tank on a regular (every couple years) basis.I thinkwe had ours pumped once in 10 years or so and that was because the old metal tank (installed in the 1930s) was failing (rotted through0 we replaced it with a new concrete tank and then went I think 15 years or more without aving a problem.As I understand it people need to pump because they don’t watch what they ‘feed’ into the tank.You put in chemicals that kill the bacteria and it doesn’t processthe waste.The funny thing is that now I hear of major sewer systems developing plans to limit what gets flushed down the toilet.No old medicine, cleaning chemicals, baby wipes, none of this went down at our house.Then again maybe we were just lucky:-)This is an excellent point.Having lived with this type of system, it is a no-brainer about what is flushed or not which has a huge impact on how a ‘healthy’ system functions.City-folk don’t seem to understand that there are just some things that shouldn’t go down there.However, in our state, the DNRrequiresthat all septic systems must beinspectedevery three years.While certainly helpful for aging systems that could have the potential for failure, to me it’s just their way of making sure I do my part to keep the local pumping company in business.When I questioned the pumper about this so many years ago, he explained his procedure for inspecting the system which(of course)he is unable to evaluate thoroughly unless the tank is empty.So in states like mine, access to the tanks must be made every three years.In the case of my current system, because it was a complete tank replacement, it automatically came with two access ports because it is a two chamber tank so the risers were just a ‘given’.RVcook
Pleaseregisterto post and access all features of our very popular forum. It is free and quick. Over $68,000 in prizes has already been given out to active posters on our forum. Additional giveaways are planned. Detailed information about all U.S. cities, counties, and zip codes on our site:City-data.com.

All times are GMT -6.

What is Septic Tank Riser

If you are one of the twenty percent of houses in the United States who are not linked to a centralized sewer system, the likelihood is that you have a septic system installed in your yard. A septic system is a sewage maintenance system that is installed on-site. While you are no longer required to pay monthly sewer fees to your local municipality, you are still responsible for the upkeep and maintenance of your septic tank system. Septic Connection, for example, is an excellent choice for an experienced septic service company in your area.

  1. Installation of an aseptic tankriser can help to reduce the amount of time spent on sewer maintenance.
  2. Due to the fact that septic tanks are often constructed many yards below and even the lids are just a few feet deep, locating and reaching the tank lid may be a time-consuming and difficult task.
  3. The installation of a septic tank riser is a cost-effective solution to this issue.
  4. The Advantages and Disadvantages of a Septic Tank Riser The world is not full of rainbows and butterflies.
  • Septic tank risers are built of sturdy materials that protect the septic tank lid from the weather. They are installed on the outside of the tank. A septic tank riser not only makes the placement of your septic tank lid evident, but it also protects your septic tank against unintentional pressure buildup. It’s easy to lose track of where the septic tank is and end up parking your car over it or dumping heavy equipment on it, which is dangerous. In addition, homeowners may be concerned about the expense of installing a new septic tankriser, but it should be emphasized that installation is straightforward and inexpensive. In addition, the expense is insignificant when compared to the long-term savings. With a septic tank riser, you will save both time and money during future septic system maintenance because your septic service provider will be able to find the tank and perform the necessary repairs more quickly
  • And The problem of aesthetics is also a source of concern for many homeowners. The fact that you do not want a pipe protruding from your property is totally understandable. If aesthetics are important to you, inform your septic tank riser installation professional so that they can ensure that the riser is installed such that the top of the riser is a few inches below the ground surface. By doing so, you may cover the surface with a thin layer of dirt and grass.

The Process of Locating a Reliable Septic Tank Riser Installer South Carolina-based Septic Connection is a fully licensed and insured firm with years of industry expertise, competent experts, and a professional staff. Our state-of-the-art equipment enables us to complete installations in a short amount of time and at a cost that is reasonable to our customers. So you never have to worry about dealing with septic difficulties on your own again, we offer emergency services around the clock. Are you ready to form a partnership?

5 Reasons to Install Septic Tank Risers

Most homeowners consider their septic system to be a “out of sight, out of mind” service that receives little or no attention unless there is a problem. Septic systems are buried underground, and if you aren’t sure where your tank and its components are, it might be tough to discover your access ports or manhole covers if you aren’t familiar with your property’s layout. Septic tank risers are a straightforward, cost-effective solution to this problem that can result in significant long-term savings.

  • What is a septic tank riser and how does it work?
  • Risers, sometimes known as “extensions,” are available in a variety of heights to raise any access port up to grade.
  • Because the riser extends from your tank entrance to the lawn surface, it makes it much easier to reach your septic tank for pumping, maintenance, and inspections than it would otherwise be.
  • Digging down to your septic tank lid or access port and fitting the riser to the entrance are the steps involved in installation.
  • Then we’ll fill the area around the pipe with earth and put the lid on top of it once it’s in place.

To make the lid integrate smoothly into your yard and landscaping, you are invited to put grass or mulch around the top of the lid. The AdvantagesWhen it comes to septic tank risers, there are a plethora of advantages to consider.

  1. The expense of installing a riser is one-time, but the advantages are long-lasting. The cost of the extension will be covered after it is completed, and your tank will be easier to access for pumping, maintenance, and inspections. Never again will you have to look for your access ports! When we put your manhole cover up to grade, it will be clearly visible at all times
  2. There will be no more digging! This is especially useful during the winter months, when digging out a buried manhole cover might take several hours and need specialized equipment. This is in addition to the mess that it can create in your yard if the lid is buried several feet down
  3. Nonetheless, it saves you money. Time is money, after all! Furthermore, since it is simpler to reach your septic tank, our staff can complete your task or resolve your problem much more quickly
  4. It is critical to understand where everything is located. If you’re putting up a new patio, house addition, or backyard project, understanding where your tank and its components are located will be quite beneficial to your project. We’ll even draw you a schematic if you need one
  5. Just let us know.

It is only necessary to install a riser once, yet the benefits will last for years to come. Once the extension is completed, you will not be required to pay for it again, and your tank will be easily accessible for pumping, maintenance, and inspections. Forget about looking for your access ports anymore. No more digging! When we bring your manhole cover up to code, it will be clearly visible at all times. This is especially useful during the winter months, when digging up a buried manhole cover can take several hours and need a lot of patience.

Timing is everything!

It’s quite helpful to know the exact location of your tank and its components if you’re planning a new patio, house addition, or backyard renovation.

Leave a Comment

Your email address will not be published. Required fields are marked *