What Is A Traffic Rated Septic Tank? (Perfect answer)

Oldcaslte Infrastructure tanks are watertight, suitable for moderate and traffic loading conditions, and environmentally friendly. With standard and customizable options, these tanks are the optimal choice when municipal sewers are not an option.

Precast Concrete Septic Tanks – AJFoss

  • Septic tanks designed to handle traffic-rated loads have thicker side walls and bottom and top slabs, and require specialized equipment to handle their additional weight. H-20 Loading is defined by the American Association of Highway and Transportation Officials (AASHTO) as a vehicle load with an 8,000 pound front axle and one rear axle weighing 32,000 pounds representing a 16,000 pound wheel load.

Which type of septic tank is best?

The best choice is a precast concrete septic tank. Precast septic tanks hold many advantages over plastic, steel, or fiberglass tanks. This is why so many cities and towns actually require the use of concrete septic tanks.

How big is a 750 gallon concrete septic tank?

750 Gallon Septic Tank – Single Compartment. 60”D x 51”H x 92”L.

What is the difference between a septic tank and a septic system?

A typical septic system consists of a septic tank and a drainfield, or soil absorption field. The septic tank digests organic matter and separates floatable matter (e.g., oils and grease) and solids from the wastewater.

What is a low profile septic tank?

Close. Norwesco Low Profile septic tanks are molded in one piece, requiring no additional assembly, reducing installation time and effort. Other features include: Rotationally molded rugged, one-piece tank with no seams to leak.

How often does a 1000 gallon septic tank need to be pumped?

For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.

What are the 3 types of septic systems?

Types of Septic Systems

  • Septic Tank.
  • Conventional System.
  • Chamber System.
  • Drip Distribution System.
  • Aerobic Treatment Unit.
  • Mound Systems.
  • Recirculating Sand Filter System.
  • Evapotranspiration System.

Can you have a septic tank without a leach field?

The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.

What is the alternative to a septic tank?

Mound systems work well as alternatives to septic tanks when the soil around your home or building is too dense or too shallow or when the water table is too high. Although they are more expensive and require more maintenance than conventional systems, mound systems are a common alternative.

Does shower water go into septic tank?

From your house to the tank: Most, but not all, septic systems operate via gravity to the septic tank. Each time a toilet is flushed, water is turned on or you take a shower, the water and waste flows via gravity through the plumbing system in your house and ends up in the septic tank.

Septic Tank-1500 Gal.-Traffic Rated

Overview Septic tanks made of precast concrete are safe and dependable containment vaults that are used to naturally treat and separate wastewater. Tanks from Oldcaslte Infrastructure are waterproof, appropriate for moderate and high traffic loading circumstances, and are also ecologically conscious. These tanks, which come in a variety of conventional and configurable configurations, are the best alternative where municipal sewers are not an option. Grade ringsrisers, lifters, pulling irons, drainage sumps, and knockouts are all options for customizing your project to meet your specific demands and specifications.

  • The following terms are used in this document: Modular Construction, Base/Bottom Section, Lids/Top Sections, Body Slab and Risers, Rings/Cover, Embedded Lifters, Grade Rings and Risers, Knock-outs/Block-outs, Divider Walls.
  • Natural wastewater treatment and separation is made possible by the rugged durability of the system. Sectional design that may be customized
  • Installation is quick and simple. Design featuring distinct access points, block-outs, and knock-outs on each of the five sides
  • Base with four sides and an integral floor (body slab) as an alternative
  • The design of the panel part is optional. Various shapes and sizes are available. Covering and protecting
  • Accessibility for maintenance and inspection
  • Various shapes and sizes are available. Access openings of several sizes and locations are available
  • Customization to satisfy specific depth requirements
  • Various shapes and sizes are available. Various sizes are available. Cast or ductile iron covers for concrete manhole frames or concrete coverings for concrete manhole frames
  • Allow for simple installation
  • Material made of galvanized steel
  • 2, 4, 8, and 20-ton capacity loading capabilities. There are also one-ton universal lifters available. Covers for the access openings that are elevated above ground level
  • Available in both rectangular and circular configurations
  • A variety of inlet and outletconnection sizes and altitudes are accommodated by the numerous sites
  • Custom round or rectangular forms are available based on your design parameters. In order to get the correct fit, knock-outs may be readily shattered with a hammer. The customer is responsible for installing baffles and pipework. Baffles made of precast concrete are installed in the base portion. Create a barrier to slow down effuient and keep solids in place.

Location Available

Idaho Falls, ID is located at 2240 S Yellowstone Highway.

Quote Generator

Interested in receiving an estimate for your project? While exploring our items, click on “Add to Quote Generator” to receive a quick quote for everything you require in one place. We use cookies to provide you with a better browsing experience, to monitor site traffic, to customize content, and to supply you with more relevant adverts and information. You can find out more about how we use cookies and how you can manage them by reading our Cookie Policy. If you continue to use this site, you are indicating your acceptance of the usage of cookies.X

Shoaf Precast, North Carolina Septic Tank Supply

It is frequently essential to build a precast concrete grease interceptor or a septic tank in a motor traffic area due to the presence of grease. In addition to our new 6,000-20,000 gallon Septic, Pump, and Grease Tanks that have been developed and authorized to withstand H-20 and HS-20 loads, we also have a complete line of traffic rated products. Traffic-rated tanks are constructed with a concrete mix that is no less than 5,000 pounds per square inch (PSI), as well as thicker side walls, bottom and top slabs, as well as keeping a length to width ratio of two to one.

What is the difference between H-20 and HS-20 loading?

(See the illustration below.) As described by the American Society of Civil Engineers (ASCE): “A vehicle load with an 8,000-pound front axle and two rear axles weighing 32,000 pounds each representing two 16,000-pound wheel loads.” (See the illustration below.) When there is the potential of multiple axle loads, larger footprint structures are developed in accordance with HS-20 regulations.

Shoaf Precast, North Carolina Septic Tank Supply

Installation of a precast concrete grease interceptor or a septic tank in a high-traffic area is a common occurrence in commercial and industrial buildings. In addition to our new 6,000-20,000 gallon Septic, Pump, and Grease Tanks that have been built and authorized to handle H-20 and HS-20 loads, we also have a complete line of traffic-rated products. Besides stronger side walls, bottom and top slabs, and a length to width ratio of 2 to 1, our traffic-rated tanks are constructed of concrete that has a minimum compressive strength of 5,000 PSI.

Is there a difference between HS-20 and H-20 Loading?

The graphic below illustrates this.

The graphic below illustrates this. When there is the possibility of multiple axle loads, larger footprint buildings are developed to HS-20 specifications.

SEPTIC TANKS(H/20) NC APPROVALNUMBER HEAVIESTPIECE(Pounds)(*) DenotesTotal Tank Weight MINIMUMHOLESIZE(see note ^) ACTUAL TANKHEIGHT BOTTOM OF TANKTOBOTTOM OF INLET BOTTOM OF TANKTOBOTTOM OF OUTLET
Length Width
1,000 Gal. STB-2022 9,000 12 ft. 7 ft. 61″ 47″ 45″
*18,000
1,250 Gal. STB-200 10,000 12 ft. 7 ft. 72″ 61″ 58″
*20,000
1,500 Gal. STB-2023 11,250 12 ft. 7 ft. 79″ 65″ 63″
*22,500
2,100 Gal. STB-548 16,000 16 ft. 8 ft. 70″ 57″ 54″
*32,000
2,500 Gal. STB-549 18,000 16 ft. 8 ft. 83″ 70″ 67″
*36,000
3,160 Gal. STB-550 22,000 16 ft. 8 ft. 99″ 84″ 81″
*44,000
4,000 Gal. STB-551 22,000 16 ft. 8 ft. 119″ 107″ 104″
*51,000
5,000 Gal. STB-552 22,000 16 ft. 8 ft. 137″ 124″ 121″
*57,000

Dimension Chart:HS/20Septic Tanks

SEPTIC TANKS(HS/20) NC APPROVALNUMBER HEAVIESTPIECE(Pounds) MINIMUMHOLESIZE(see note ^) ACTUAL TANKHEIGHT BOTTOM OF TANKTOBOTTOM OF INLET BOTTOM OF TANKTOBOTTOM OF OUTLET
Length Width
6,000 Gal STB-2081 46,500 26 ft. 16 ft. 80 1/2″ 63 1/2″ 60 1/2″
8,000 Gal. STB-2082 40,100 26 ft. 16 ft. 95 1/2″ 78 1/2″ 75 1/2″
10,000 Gal. STB-2083 40,100 26 ft. 16 ft. 111″ 94″ 91″
12,000 Gal. STB-2084 46,500 26 ft. 16 ft. 131 1/2″ 114 1/2″ 111 1/2″
14,000 Gal. STB-2085 40,100 26 ft. 16 ft. 145″ 128″ 125″
16,000 Gal. STB-2086 40,100 26 ft. 16 ft. 162″ 145″ 142″
18,000 Gal. STB-2087 40,100 26 ft. 16 ft. 180″ 163″ 160″
20,000 Gal. STB-2088 40,100 26 ft. 16 ft. 196 1/2″ 179 1/2″ 176 1/2″
See also:  How Many Feet Of Septic Tank Domes Are Needed? (Question)

You didn’t find what you were searching for? Sizes to fit your specific needs are available upon request. Alternatively, you may reach out to an employee at Shoaf Precast for extra assistance.

Traffic-Related Tank Design

Letter to Professional Engineers, Architects, and Specifiers, Addressed to All A thicker top slab added to a standard-duty grease interceptor or septic tank will be sturdy enough to withstand the weight of the system. Eric Barger contributed to this article. What really is in a name? When it’s your name on it, everything is possible. The quality of your design is attested to by your name, which is supported by your professional seal. When your design is stamped with a professional engineering stamp, you can reassure your customer that it complies with all applicable rules, standards, and laws – and that it also includes generally recognized engineering principles.

  1. If you are a tank maker, you may be tempted to use existing molds to create your tank.
  2. There are several aspects that contribute to the cost of a new traffic-rated product, and new molds are only the beginning of the challenges and additional costs associated with traffic-rated tanks.
  3. Tanks intended to withstand traffic-rated loads feature thicker side walls, bottom and top slabs, and require bigger equipment to handle the greater weight they impose on the tank’s infrastructure.
  4. It’s possible that a new truck, boom, and rigging will be necessary to transport and deliver the larger and heavier traffic-rated tank, depending on the situation.
  5. Due to the increased weight of the new product on the production line, it may be necessary to improve the infrastructure of current factories, which might be quite expensive.
  6. For traffic-rated design standards, it is necessary to increase the amount of concrete used and to build a mix with additional portland cement to achieve a greater 28-day ultimate strength.
  7. Additional engineering will be necessary to ensure that the tank design is of high quality in order to meet any potential liability issues.

Increasing the thickness of the top slab is not the solution.

In this case, a tank with a thicker top slab is delivered and immediately placed in traffic-rated service with no additional consideration given.

Due to the fact that an engineering traffic-rated tank may be as much as two and one-half times the cost of a non-traffic-rated tank supplied by a rival who does not follow appropriate industry procedures, many manufacturers are concerned about losing a sale to a competitor.

What do you think about this practice?

The whole precast construction bears the weight of the wheels.

The American Association of Highway and Transportation Officials (AASHTO) defines HS20 loading as a vehicle with a front axle weighing 8,000 pounds (3,630 kg) and one or more rear axles weighing 32,000 pounds (14,500 kg) each and spaced at least 14 feet (4.3 m) apart and a total vehicle weight of 32,000 pounds (14,500 kg).

  1. The live wheel load has an effect on the whole precast tank, not simply the top slab, as previously stated.
  2. The upward bearing pressure applied to the bottom slab is the reaction to all of the downward forces combined, including the tank’s own weight, soil loads above the tank lid, and all live loads.
  3. This example is a real precast concrete tank design that has been in use as a non-traffic-rated tank for more than 15 years and is still in use today.
  4. When the initial design in Figure 1 was created, the idea of placing the tank in a high-traffic location was not a consideration at all.
  5. The liability considerations alone are enough to dissuade some manufacturers from developing a tank that is capable of carrying such heavy weights in the first place.
  6. Can non-traffic-rated tanks be effectively modified?
  7. The engineering analysis was carried out by Delta Engineers, Architects, and Surveyors of Endwell, New York.

A layer of dirt should extend 1 to 2 feet (0.3 to 0.6 m) over the top of the tank.

At any given moment, no more than one axle or two wheels may be above the tank.

4.

The bottom slab and wall thicknesses, on the other hand, cannot be changed.

The compartment wall of the tank is made of a single solid block of material.

When the tank is empty, the water table must be at least 3 feet (0.9 m) below the surface of the ground.

The walls are supported at the ceiling by an interlocking recess that is cast into the top slab of the top slab of the top slab.

The size, spacing, and position of reinforcing bars should be placed in accordance with the recommendations of a Professional Engineer.

Due to the tank’s maximum burial depth of 2 feet (0.6 m), it is evident that it would be effective in only a limited number of applications given its flexibility in this study.

If a business changes from being a gas station to being a truck stop, this would be an example of a drastic change that could invalidate all of the preconditions listed above and render the tank design insufficient in that situation.

When an underground tank falls or is damaged, manufacturers now must deal with the resulting failures and costly litigation.

Will you be ready to assume the responsibility and potential lawsuit that might result from a structural breakdown years after today’s tank is placed if site circumstances change years after today’s tank is erected?

When permitting tanks for installation, it is necessary to consider a design that integrates HS20 traffic loading, as well as the suitable overburden depth and riser concentration loads.

Remember, the only method to determine whether or not a tank is traffic-rated is to inspect the structural design, which must be stamped and signed by a registered Professional Engineer in good standing and must specify the maximum design capacity in writing.

Located in Lenoir City, Tennessee, Eric Barger is the president of BargerSons Inc. (), a precast concrete factory that specializes in precast concrete. He presently serves on the board of directors of the National Parks Conservation Association as well as the NPCA Educational Foundation.

Traffic Rated Septic Treatment Systems

Many house sites are deemed unbuildable owing to their tiny lot size or inconvenient geographic location. In other words, your property may be too tiny to accommodate all of the necessary services, such as septic treatment. You will be unable to construct your ideal home due to the limited size of the property. If you reside in Santa Cruz County on a “postage-size” lot, or if you operate a gorgeous boutique winery in Napa or Sonoma Counties in California, you are familiar with the problem of having a little property.

  • If this is the case, give one of our trained septic treatment specialists a call right once.
  • One alternative is to have your septic tank installed underneath your driveway.
  • This is made possible by the use of Hoot’s “all in one” compact design and robust concrete construction.
  • All Hoot Tanks are waterproof, suited for moderate and high traffic loading circumstances, and ecologically beneficial in their construction and operation.
  • Grade rings, risers, lifters, and pumps are among the elements that may be customized to meet the needs of our project.

Recent Traffic Rated Septic Treatment System Installations

Sewage Tank Issue:Installing a new septic treatment system in a location where no existing septic system has been able to fit is a difficult task. Solution for a septic tank: Install a new full single tank system. Hoot H600 BNR A is a traffic-rated hoot. More information can be found at

Recent ArticlesTips

  • When Should You Have Your Septic System Repaired? Because your septic system is underground, it might be easy to miss any difficulties that it is having. However, this does not imply that the problems are not severe, nor does it imply that you are unable to detect problems. w
  • What Are the Causes of Septic Backups? Your house or yard may already be contaminated by wastewater, which is the most prevalent symptom of a septic system malfunction, as you are aware. What you may not be aware of is the reasons why your septic system is backing up. There are a variety of options
See also:  How Big Should Septic Tank Be For 2 People? (Question)

Septic Tanks

In What Situation Should You Have Your Septic System Repaired? It is easy to ignore problems with your septic system since it is located underground; nevertheless, this does not imply that the problems are not severe, nor does it imply that you are unable to discover issues. Septic Backup: What Causes It and How to Prevent It Your house or yard may already be contaminated by wastewater, which is the most typical symptom of a septic system malfunction. What you may not realize is that there are several causes for your septic system to backup.

1000GST 1000 Gal. Septic Tank
1000GSTS 1000 Gal. Septic Tank (Set)
100GSTST 1000 Gal. Septic Tank (Set) TRAFFIC
1200 GST 1200 Gal. Septic Tank
1200GSTS 1200 Gal. Septic Tank (Set)
1200GSTST 1200 Gal Septic Tank (set) TRAFFIC
1500 GST 1500 Gal. Septic Tank
1500GSTS 1500 Gal. Septic Tank (set)
1500GSTST 1500 Gal. Septic Tank (set) TRAFFIC
2250GSTS 2250 Gal Septic Tank (Set)
2250 GSTST 22500 Gal. Septic Tank (Set) TRAFFIC
3000GSTS 3000 Gal. Septic Tank (set)
3000GSTST 3000 Gal Septic Tank (set) TRAFFIC
3750GSTS 3750 Gal. Septic Tank (Set)
3750 GSTST 3750 Gal. Septic Tank (set) TRAFFIC
6000GSTS 6000 Gal. Septic Tank (Set)
6000GSTST 6000 Gal. Septic Tank (Set) TRAFFIC
750GST 750 Gal. Septic Tank
750GSTS 750 Gal. Septic Tank (Set)
750GSTST 750 Gal Septic Tank (set) TRAFFIC

1000 Regular H-20

The 1000 Regular H-20 septic tank is intended for use on highways, driveways, and other places subjected to high H-20 traffic loads. It is available in a variety of sizes.

Specifications:
  • A monolithic septic tank was built with 5000 psi concrete and reinforced with structural fibers grade-60 rebar in just 28 days. Precast concrete with air entrained in it: 6 percent (+-1 percent)
  • Tank penetrations with rubber boots that are integrally cast
  • Constructed to withstand H-20 traffic loads
  • Fill depths range from 0 to 36 inches
  • Vacuum testing is offered for an extra fee. Cast iron frames and covers with a 24″ diameter (not included, but required)

Septic tanks in the 1000 Regularu00a0H-20 size range are intended for use on roads and driveways, as well as other places subject to H-20 traffic loads. u00a0

rn

Specifications:

rn

  • The design of a monolithic sewage treatment plant Reinforced with structural fibers grade-60 rebar, the concrete was placed at a pressure of 5000 psi and set in 28 days. rn
  • Precast concrete with air entrained reinforcement: 6 percent (+-1 percent)
  • The tank penetrations are integrally cast with rubber boots. The tank penetrations are designed for H-20 traffic loads. Vacuum testing is offered for an extra fee and may be done at any depth between 0 and 36 inches.rn Cast iron frames and covers (not included
  • (2) are required)
  • 24″ diameter cast iron frames and covers If you want to customize something, you may do so with a few clicks. rn
  • , description short:, available now:, available later
  • , id product:31, out of stock:0, new:0, id product attribute: 198, quantity wanted:1, extraContent:, allow oosp:true
  • , category: septic-tanks
  • , category name: The following are the default values for the cover and the home page. The following are the default values for the medium and large defaults. The following are the default values for the cover and the large defaults. The following are the default values for the legend:, the following are the default values for the small and large defaults. The following are the default values for the legend:, the following are the default values for the small and large defaults.

Data sheet

1000-gallon capacityWeight10,757 poundsCapacity The outside dimensions are: 67″ H x 5’4″ W x 8’0″ LInvert Out is 51 1/2″.

Specific References

Founded in 1968, Jensen Precast has been manufacturing septic tanks. With over 30 years of experience in the septic tank industry, we are the leading producer in Western United States. Septic tanks are the first and most important component of a comprehensive onsite wastewater treatment system. When utilized in conjunction with one of the various treatment and dispersion options available, the septic tank may be considered a comprehensive onsite wastewater treatment system. When you choose a Jensen Precast Septic Tank, you will receive the following benefits: Strength and Structural Integrity – All Jensen Precast septic tanks are engineered by Professional Civil and Structural Engineers to withstand the anticipated loading conditions.

  1. In accordance with the National Precast Concrete Association’s Plant Certification Program, our production operations are subjected to extensive and comprehensive quality control methods during the manufacturing process.
  2. Acceptance by the Uniform Plumbing Code (UPC)- Jensen Precast septic tanks are listed in the Uniform Plumbing Code (UPC), which was issued by the International Association of Plumbing and Mechanical Officials (IAPMO).
  3. Designed and produced in line with the strict and extensive criteria of this national standard, Jensen Precast septic tanks meet or exceed the standards of this standard.
  4. We maintain a large inventory of septic tanks on hand, allowing us to provide quick delivery to any location within our service region.
  5. Grease interceptors from Jensen Precast are available in any size and capacity that is necessary.
  6. The addition of a few simple and cost-effective accessories to your septic tank can allow you to drastically reduce your long-term expenses of ownership.
  7. The installation of an effluent filter in a septic tank is a cost-effective and easy way to increase the life and efficacy of any treatment system while also reducing maintenance costs.
  8. Carbon filters are good at reducing the smells emitted by sewage gas vents.
  9. System for Treatment and Disposal – Jensen Precast is a full-line supplier of a wide range of septic tank treatment systems as well as associated parts, components, and accessories.

Pumps, control panels, sand filters, AdvanTex textile treatment systems, and a variety of other products are available.

Engineering Specs

Selvage Concrete Products is dedicated to the design and construction of high-quality tanks. We give our specifications to our clients as a convenience, so that you are aware of exactly what you are purchasing when you purchase from Selvage Concrete. You may reach us at (707) 703-1444 if you have any questions or would want to make an order for fortanks in the Northern California area. Sump Tank (500 g)–Free Download The 500 gallon sump tank is available in PDF format. Spec Sheet for an 810-gallon Septic Tank (Download) Septic Tank with a Capacity of 810 Gallon PDF Download the Specs Sheet for the 810 gal Sump Tank.

Grease Trap with a Capacity of 810 Gallon PDF specifications sheet810 gal 3 composit Download the Sand-Oil Trap.

1200 Gallon Sump Tank Specifications A specification sheet for a 1200 gal 2 comp Download the Grease Trap.

1200 Gallon Sand-Oil Trap Specification Sheet 1500 gallon Septic Tank Specifications Sheet–Download The 1500 gallon septic tank specification sheet is available in PDF format.

1500 Gallon Sump Tank Specs and Specifications Specifications Sheet1500 gal 2 comp Grease Trap–Download 1500 Gallon Grease Trap PDF Specs Sheet1500 gal 3 comp Sand-Oil Trap–Download 1500 Gallon Sand-Oil Trap PDF Specs Sheet1500 gal 3 comp Sand-Oil Trap–Download Sand-Oil Trap with a Capacity of 1500 Gallon (PDF) Download the Specs Sheet2000 Septic Tank (in PDF format).

2000 Sump Tank–Download the 2000 Sump Tank PDF Specs Sheet2000 Sand Oil Tank–Download the 2000 Sand Oil Tank PDF Specs Sheet Sheet2000 Grease Trap–Download the 2000 Grease Trap PDF Specs SheetConcrete Slab Design–Download the Concrete Slab Design PDF Specs Sheet2000 Grease Trap–Download the 2000 Grease Trap PDF Specs Sheet2000 Grease Trap–Download the 2000 Grease Trap PDF Specs Sheet2000 Grease Trap–Download the 2000 Grease Trap PDF Specs Sheet2000 Grease Trap–Download the 2000 Grease Trap PDF Specs Sheet2000 Grease Tra H20 Rated Septic Tank with Side Outlet–Download the PDF Specs Sheet for the Concrete Slab Design.

H20 Rated Septic Tank with Side Outlet PDF Specs SheetH20 Rated Septic Tank–Download the PDF Specs SheetH20 Rated Septic Tank Septic Tank Specs Sheet in PDF Format for H20 Rated Septic Tank Sump tanks that are H20 rated–Download The H20 Rated Sump Tanks PDF Specs SheetH20 Rated Tank Design–Download the PDF Specs Sheet H20 Traffic Rated Tank Design PDF Specs SheetH20 Traffic Rated Tanks Sealed in and out–Download H20 Traffic Rated Tank Design PDF Specs Sheet H20 Traffic Rated Tanks with Sealed In and Out PDF Specs SheetConcrete Grade Rings–Download the specification sheet for concrete grade rings.

Concrete Grade Rings Specs Sheet in PDF Format A-1024 is a 24 ID FrameCover Set that may be downloaded.

36 ID FrameCover Set – A-1466 PDF Specs Sheet42 ID FrameConcentric Covers Set – A-1427–Download 42 ID FrameConcentric Covers Set – A-1427 The A-1427 PDF specification sheet has the specifications for the 42 ID FrameConcentric Covers Set.

42 ID FrameCover Set – A-1467 (CA) PDF Specs Sheet48 ID FrameConcentric Covers Set – A-1428–48 ID FrameConcentric Covers Set – A-1428–48 ID FrameConcentric Covers Set – A-1428–42 ID FrameCover Set – A-1467 (CA) PDF Specs Sheet

Fiberglass Tanks

Construction of high-quality tanks is our specialty at Selvage Concrete Products. You will know precisely what you are receiving when you purchase from Selvage Concrete since we publish our specifications for your convenience. If you have any concerns or would like to make an order for fortanks in Northern California, please do not hesitate to contact us at (703) 703-1444. The Sump Tank weighs 500 grams. Formalized PDF for a 500 gallon sump tank Septic Tank Specifications Sheet–Download Septic Tank with a Capacity of 810 Gallons PDF 810 gal Sump Tank Specifications Sheet–Download Sump tank has a capacity of 810 gallons.

  1. Free Download of the Grease Trap Grease trap with a capacity of 810 gallons.
  2. Sand-Oil Trap with a Capacity of 810 Gallons PDF Document: 1200 gal Septic Tank Specifications Sheet (PDF) Septic Tank 1200 Gallon (PDF) Sump Tank Specs Sheet (Download) 1200 gal.
  3. spec sheet The Sand-Oil Trap is available for download here.
  4. Septic Tank Specs Sheet2000–Download the document A PDF version of the SE Tank from 2000 Download the 2000 Sump Tank Specs Sheet (in PDF format).
  5. A PDF specification sheet for the 2000 Sand Oil Tank is available for download as well.
  6. PDF Specs Sheet for an H20 Rated Septic Tank with a Side OutletH20 Rated Septic Tank–Download the PDF Specs Sheet.
  7. Hydraulic rated tank design PDF spec sheet Hydraulic rated tank design PDF spec sheetH20 traffic rated tanks sealed inside and out–Download H20 Traffic Rated Tanks with Sealed In and Out PDF Specs SheetConcrete Grade Rings–Download a PDF of the specifications for concrete grade rings.
See also:  How To Tell If Property Is A Septic Tank?

A-1024 PDF Specs Sheet30 ID FrameCover Set – A-1465–Download 24 ID FrameCover Set A-1024 PDF Specs Sheet A-1465 PDF Specs Sheet for the ID FrameCover Set with 30 ID Cards 366 A-1466 FrameCover Set with 36 ID Numbers–Download Specs Sheet for the 36 ID FrameCover Set (A-1466) PDF 42 ID FrameConcentric Covers Set (A-1427) PDF Specs Sheet for the 36 ID FrameCover Set The A-1427 PDF specification sheet contains the specifications for the 42 ID FrameConcentric Covers Set.

The A-1467 (CA) specification sheet contains the specifications for the 42 ID FrameCover Set.

ID FrameConcentric Covers Set – A-1428–42 ID FrameConcentric Covers Set – A-1467 (CA) PDF Specs Sheet48 ID FrameConcentric Covers Set – A-1428–48 ID FrameConcentric Covers Set – A-1428–42 ID FrameConcentric Covers Set – A-1467 (CA) PDF Specs Sheet

Concrete Tanks, Fiberglass Tanksand SepticSump Tanks in Santa Rosa, CA

Sales of water tanks in Santa Rosa, Petaluma, Vallejo, Napa, Novato, Rohnert Park, and Fairfield, California. California’s San Rafael Selvage Concrete Products is located at 3309 Sebastopol Road in Santa Rosa, CA 95407.

McCreary Concrete

I’m a paragraph of text. Click here to add your own content and make changes to what I’ve written. It’s a simple process. Adding your own information and making changes to the typeface is as simple as clicking “Edit Text” or double clicking on me.

Manholes

I’m a paragraph, to put it another way. Fill up the blanks with your own content and make any changes you like. The procedure is straightforward. Adding your own information and making changes to the typeface is as simple as clicking on “Edit Text” or double clicking me.

Inlet Boxes

I am a paragraph of text. Click here to add your own content and make changes to my work. It’s not difficult. Simply click “Edit Text” or double-click me to add your own information and make changes to the typeface.

Grease/Oil/Sediment Structures

I’m a paragraph of text. Click here to add your own content and make changes to what I’ve written. It’s a simple process. Simply select “Edit Text” from the drop-down menu or double click.

Dosing Tanks

I’m a paragraph of text. Click here to add your own content and make changes to what I’ve written. It’s a simple process. Adding your own information and making changes to the typeface is as simple as clicking “Edit Text” or double clicking on me.

Distribution Boxes

I’m a paragraph, to put it another way. Fill up the blanks with your own content and make any changes you like. The procedure is straightforward. Adding your own information and making changes to the typeface is as simple as clicking on “Edit Text” or double clicking me.

Products

Available for the vast majority of municipalities and in virtually any configuration. 1000 Series, 1250 Series, 1500 Series, 2000 Series, 48 Series, Custom Vault 1, Custom Vault 2, Custom Vault 3, 1000 Series, 1250 Series, 1500 Series, 2000 Series, 48 Series

Grease/Oil/Sediment Structures

Grease/oil/sediment structures are available in a variety of formats, including standard, job-specific, and municipality-specific. Please get in touch with us for additional information on all of our choices and bespoke drawings.

Dosing Tanks

Grease/oil/sediment structures are available in a variety of formats, including conventional, job-specific, and municipally specific. More information and bespoke drawings are available by contacting us.

I.N.D.O.T. Structures

Handholes for signaling, right-of-way markers, monuments, and so on.

Manholes

Sanitary and storm manholes with 48″ base, 60″ base, and 72″ base, Knock-Out Base, Fitted Base Slab, Barrel, Flat Top, Cone, Base Reinforcing, Barrel Reinforcing, Flat Top Reinforcing, and Cone Reinforcing In addition, sanitary and storm grade adjusting rings are offered.

Lift Stations

Commercial Effluent, Stormwater, Sewage, and Grinder Lift Stations are available in either tank or manhole configurations to meet your needs. Simplex, duplex, triplex, and quadplex capabilities are available. 36 Simplex, 36 Sewage, 48 Simplex, 48 Duplex, 48 Sewage, 48 Grinder, 60 Simplex, 60 Duplex, 1000 Simplex, 1000 Duplex, 1250 Simplex, 1250 Duplex, 1500 Simplex, 1500 Duplex, 1500 Triplex, 2000 Simplex, 2000 Duplex, 2000 Quadraplex, 2000 Simplex, 2000 Duplex, 2000 Quadraplex, 2000 Simplex, 2000 Duplex, 2000 Quadraplex, 2000 Simplex, 2000 Du Residential Sewage Treatment Facility Lift Station for Stormwater

Inlet Boxes

Yard Inlets, Curb Inlets, and Outfall Structures are all types of inlets. The product is available with or without knockout panels, and may be custom-cast to your requirements. Boxes: 2×2 Box, 2×2 K/O Box, 2×2 Top Cap, 2×2 Risers, 2×2 Reinforcing, 2×3 Box, 2×3 K/O Box, 2×3 Top Cap Round Opening, 2×3 Top Cap Square Opening, 2×3 Risers, 2×3 Reinforcing, 30×30 Box, 30×30 K/O Box, 30×30 Top Cap Round Opening, 30×30 Top Cap Square Opening, 30x We can also cast bespoke sizes such as 3×3, 4×4, 5×5, 6×3, and so on.

There are other Grade Rings available.

Septic Tanks

Tanks allowed by Indiana include: 1000 Gallon and 1000 Gallon. 1500 gallon commercial tank has two compartments and a total capacity of 1250 gallons. 2-compartment, 2000 gallon and 2000 gallon storage tanks 2-Compartment.

Distribution Boxes

There are several different sizes to choose from. Risers for distribution boxes in a variety of sizes, including 7 hole, 9 hole, 11 hole, and 13 hole.

Leaching Structures

The following structures are available for 48″ leaching and drywell structures: 48″ barrel, 32″ barrel, fitted base slab, flat top.

Parking Bumpers

7-foot-tall automobile parking bumpers 9’8″ truck parking bumpers are available.

Specialty Structures

Do you require something that no one else can build? Allow us to provide you with a price and create your next customized precast product. Make contact with our in-house design team to turn your vision into a reality.

about

Greetings and welcome to McCreary Concrete Products, Inc., your one-stop shop for precast concrete products. We are committed to providing our clients with personalized attention and the highest-quality products possible, with a particular emphasis on quality, dependability, and customer service. McCreary Concrete Products, Inc., which was acquired by Christopher W. Elbrecht in 2007, has gone a long way from its humble origins with factory facilities in Carmel and Rushville. NPCA accredited state of the art plant in Tipton, which serves the whole state of Indiana, is currently run by his son, Chris Elbrecht, who inherited the business from his father and is now in charge of it.

  • is a concrete producer that produces products for a wide range of residential and commercial uses in the United States and Canada.
  • Every day brings new opportunities for our firm to develop and expand.
  • This will enable us to increase our productivity in a variety of ways.
  • Sincerely, The Elbrechts are a family of lawyers.

General Manager

317-385-5337 ​

Contact

Tipton, Indiana 46072: 875 W Industrial Dr.

Phone

Leave a Comment

Your email address will not be published. Required fields are marked *