Infiltrator® is the original and remains by far the most dependable septic leach field chamber system. Infiltrator Quick4 Plus™ series chambers are high-density polyethylene arches that interlock to form a continuous drainage area with a much greater storage capacity ‘surge’ volume than pipe-in-gravel leach fields.
septicrepairny.com
- Septic infiltrator systems are newer innovations that have been designed to cut down on the time taken to treat wastewater. This sub-surface chamber technology has been developed to play a complementary role in the natural wastewater treatment process. Infiltration Systems For Septic Tanks
Are infiltrator septic systems good?
Infiltrator products are scientifically designed to provide more efficient wastewater treatment by optimizing the soil’s inherent treatment capabilities. Onsite systems provide a passive, reliable means of wastewater treatment at a relatively low cost, while preserving environmental quality.
How does an infiltrator septic system work?
The chambers are buried, locked end-to-end and capped with dome-shaped end plates to create a large half-tube structure. Effluent from a septic tank flows freely into the chambers and is filtered efficiently into the soil absorption area.
What are infiltrators used for?
Wherever stone and pipe can be installed, Infiltrator chambers can be used. This includes trench, bed, and elevated mound installations. Infiltrator chambers provide superior treatment capabilities in pressure dosing, level distribution, serial distribution, evapotranspiration, and sand filter applications.
How much infiltrator do I need?
Bare minimum usage rate to estimate with is 100 gallons per person per day. Therefore the building department often uses 200 gallons per bedroom per day when sizing residential systems. Each chamber is 12 square feet of base area and 8 square feet of sidewall area.
Can you have a septic tank without a leach field?
The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.
How do you install a bio diffuser?
Install BioDiffuser leaching chambers in adjacent rows to cover desired area. Install universal end cap and secure in place with back fill. Install 4″ pipe to each row of BioDiffuser using knockouts provided in the universal end caps.
How deep should septic chambers be?
Drain Field Depth Generally, a finished bed contains 12 inches of gravel below the pipe and another 2 inches on top. The field is then backfilled with 18 to 30 inches of soil to finish the bed and bring it even with the surrounding ground. The result is a drain field about 3 to 4 feet deep.
How much do leach field chambers cost?
Installing a leach field costs $5,000 to $20,000, depending on the type. You’ll need all the components of a system. Ultimately, what you’ll pay to install a septic tank depends on the type of system, material and size.
How much are leach field chambers?
The cost for a single- family septic tank leaching chamber drainfield typically ranges between $2,000 and $5,000 in 1993 dollars. If the site is inadequate for a new drainfield and the field must be removed and replaced with a new one, the cost of a new leaching chamber system may exceed $10,000.
How does a chamber septic system work?
Chamber septic systems, using pre-formed plastic chambers (shown just above) buried in an earthen trench. Wastewater is delivered to the top of the chamber by a solid plastic pipe. Effluent seeps into soil across the bottom of the chamber.
Where are infiltrator Chambers made?
Based in Whitefield, NH, PEI manufactures combined wastewater treatment and dispersal systems.
Can you drive over leach field chambers?
In sum, driving over the leach field in any vehicle larger than a child’s bicycle is a bad idea. Heavy vehicles may actually crush buried leach field lines, or they may compress the soils around the leach field, either of which leads to failure. Driving on or parking on leach fields will destroy them.
How a Septic Tank Works
Wherever you reside, you have one of two types of wastewater systems: either you are connected to a town or city sewage network with a centralized water treatment facility, or you have your own onsite septic system, depending on your situation. If you fall into the latter category, this article will introduce you to the fundamentals of septic systems, including how they operate, how to maintain them, and why they are a safe and dependable option.
What is a Septic System?
A septic system is a type of onsite wastewater treatment system that processes and filters waste generated by a home or business (effluent). The effluent is composed of two types of water: blackwater (toilet wastes) and graywater (kitchen sink, bathtub and laundry wastes). A septic system is made up of two parts: a septic tank and a leachfield or drainfield (also known as a drainfield) (soil absorption field). The septic tank serves as the primary treatment facility, where microorganisms break down organic compounds in the effluent.
In this location, bacteria finish the digestion and purification process while wastewater slowly seeps into the soil or infiltrates into the groundwater supply.
On-site solutions make optimum use of available space at a time when land expansion is placing increasing demands on natural resources.
Maintaining a Healthy Septic System
Proper wastewater management may help you protect your family’s health as well as the environment. Maintenance and upkeep for your septic system on a regular basis will help you prevent a calamity. Obtain Our Healthy Septic System Tips by downloading the PDF file.
Winter Maintenance of Your Septic System
Septic system problems can occur at any time, but preventative maintenance is especially crucial during the harsh winter months when temperatures drop. These suggestions might assist you in keeping your septic system in peak operating condition. Obtain Our Winter Maintenance Tips by downloading the PDF file.
Public Health and Safety
When it comes to onsite wastewater recycling, the primary concerns are the protection of public health and the preservation of the environment. Before wastewater can be re-injected into the groundwater, it must be thoroughly disinfected to ensure that no harmful bacteria, germs, or pathogens are present. By utilizing the soil’s natural treatment capabilities, infiltrator products are scientifically intended to deliver more efficient wastewater treatment than conventional methods. On-site wastewater treatment systems are a passive, dependable method of wastewater treatment that is reasonably inexpensive and does not degrade environmental quality.
Field training, continuing education for installers, and curriculum assistance for onsite system design studies are just a few of the activities that Infiltrator funds and participates in.
Regional leaders and the specialists on our technical team collaborate to share information and develop solutions that will advance research, enhance system performance and improve groundwater quality.
New Septic Tank Products
- When compared to typical stone and pipe systems, infiltrator chambers provide greater design freedom and a lower footprint than the latter. Take a look at Chambers
EZflow® Septic
- An designed geosynthetic aggregate and pipe system that is environmentally beneficial and may be used to replace traditional stone and pipe drainfields. View the EZflow® Septic System
Infiltrator Tanks
- In place of typical stone and pipe drainfields, a geosynthetic aggregate and pipe system that is environmentally benign has been developed. A look at the EZflow® Septic System
Tank Risers
- Both the EZsnapTM and EZsetTM riser series are interchangeable with our IM-Series tanks, as well as with other plastic and precast tanks on the market. Tank Risers may be viewed here.
EZflow® Drainage Systems
- An environmentally beneficial, gravel-free drainage system comprised of designed geosynthetic aggregate in bundles with tubing and connected to the main sewer line. See the EZflow® Drainage Systems in action
ATL – Advanced Treatment Leachfield
- A sand-lined treatment and dispersion leachfield system that provides passive advanced wastewater treatment while minimizing energy use. View ATL – Advanced Treatment Leachfield’s profile on LinkedIn.
Pumping
- Pump tanks, pump vaults, and pumping control systems are available from Infiltrator in a variety of configurations. Pumping can be seen in action
Presby Environmental
- Solutions that are scalable and cost-effective for treating wastewater from commercial, residential, and communal sources are needed. Take a look at Presby Environmental
Delta Treatment Systems
- Infiltrator Water Technologies Company Delta offers advanced wastewater treatment solutions for residential, commercial, and community wastewater management applications. Take a look at Delta Treatment Systems
Why Choose an Infiltrator Drain field?
Drain fields, also known as leach fields or leach drains, are extremely important components of the septic system’s operation. These subterranean structures remove contaminants from wastewater before it is recycled back into the environment. To put it simply, drain fields serve as natural water recycling facilities. Prior to entering the drain field, wastewater passes through the septic tank, where it is divided into sludge (heavy, sinking materials) and scum (light, floating solids) (floating solids such as oil and grease).
- With each fresh batch of raw sewage that is introduced into the tank, the old wastewater is displaced and pushed toward the drain field.
- will design a drain field that is the most appropriate for the features of your property in accordance with local and state standards.
- In many circumstances, SWS will opt to install a plastic chamber drain field manufactured by Infiltrator Systems rather than a traditional drain field.
- Plastic Drain Field Chambers from Infiltrator Systems are described below.
- Unlike standard drain fields, which are composed of PVC pipe and stone, the Infiltrator System is comprised of a series of 4-foot-high half-tube chambers that are locked end-to-end and covered with a dome-shaped end plate to prevent water from escaping.
- Especially when Southern Water Soil President Greg Mayfield and his skilled staff are on the job, installing an Infiltrator System plastic chamber drain field is a piece of cake.
- Furthermore, because no stone is required, which eliminates the requirement for heavy equipment such as dump trucks, you will save both money and time.
- The advantages of installing an Infiltrator System plastic chamber drain field are innumerable, and they include: Let’s have a look at how the two systems compare.
- The plastic chambers used by Infiltrator Systems are lightweight and can be delivered in a single pickup truck load.
- Carrying stone is required under the old technique; a dump truck and other heavy equipment will be required to accomplish this task.
- The open-bottomed plastic chambers of the Infiltrator System allow for unimpeded infiltration of wastewater into the soil, whereas particles can accumulate between the stones surrounding a standard drain field PVC pipe, restricting infiltration and reducing effluent removal from the ground.
In general, using an Infiltrator System plastic chamber drain field will save you both time and money in the long run. To find out if Infiltrator Systems’ products are a good fit for your septic system, get in touch with Southern Water and Soil now.
Chamber Septic System
Chambers-Infiltrator® chambers are hollow structures that connect end-to-end to form a continuous structure. They are placed in ditches or beds that do not include gravel (except where local codesrequire the use of gravel). The whole bottom of the trench is open, allowing for unhindered water penetration to take place. Peak discharges of wastewater from the residence may be accommodated by the vast storage capacity included within the hollow chambers. Furthermore, innovative sidewall louvers allow for lateral leaching of effluent into the soil, which is beneficial for plant growth.
- The chambers may be rotated 15 degrees to the right and left.
- Infiltrator chambers are made entirely of reclaimed and repurposed materials.
- The chambers manufactured by Infiltrator are available in a variety of sizes to accommodate a variety of applications based on the project location and needs.
- They can be erected in a straight line or in curved trenches up to 15 degrees in a straight line or curved trench.
- From its inception in 2000, Lentz Wastewater Management has been a licensed septic installation.
Registered distribution media
Items in the public domain, such as aggregate or drainfield rocks, as well as patented products such as expanded polystyrene aggregate and chambers, are used as distribution media. There are four performance requirements that must be met by distribution mediums:
- When exposed to sewage and dirt, do not degrade, disintegrate, or leach harmful substances. Provide sufficient void area for the transit and temporary storage of effluent while maintaining a consistent density throughout the system’s service life. Provide support for the distribution network, allow for appropriate effluent distribution, and serve as an interface between the infiltrative surface — trench bottom and side wall soil — and the absorption surface for wastewater
- Preserve the integrity of the excavation and provide enough support for the soil backfill, cover material, and weight of the equipment utilized in the backfilling
Proprietary distribution media registered for use in Minnesota
| Product name and model | Manufacturer | Trenches | Seepage beds | At-grades | Mounds |
| Arc 18 | Infiltrator Systems | X | |||
| Arc 24 | Infiltrator Systems | X | X | X | |
| Arc 36, Arc 36 Low Profile (LP), Arc High Capacity (HC) | Infiltrator Systems | X | X | X | X |
| BioDiffuser chambers 11″ Standard and 16″ High Capacity | Infiltrator Systems | X | X | X | X |
| Eljen GSF, A42B43 | Eljen Corporation | X | |||
| EZflow bundled polystyrene aggregate 1202 H, 1202 H-GEO, 1203 H, 1203 H-GEO | Infiltrator Systems | X * | X | X | X |
| Quick4 Equalizer 24 Low Profile (LP), Quick4 Equalizer 24, Quick4 Equalizer 36 | Infiltrator Systems | X | |||
| Quick4 Plus Standard Low Profile (LP), Quick4 Standard, Quick4 Plus Standard | Infiltrator Systems | X | X | X | X |
| Quick4 High Capacity (HC), Quick4 Plus High Capacity (HC) | Infiltrator Systems | X ** | X | X | X |
A maximum of 34 percent decrease in trench bottom area may be achieved by using double-stacked EZflow bundled aggregate put in trenches with less than 18 inches of sidewall infiltrative surface. * Trenches having at least 12 inches of sidewall infiltrative surface are required to be fitted with the Quick4 High Capacity and Quick4 Plus High Capacity chambers in order to be registered for usage with a maximum 20 percent decrease in trench bottom area. The product listing does not imply approval by the MPCA of the manufacturer’s marketing, advertising, or labeling methods, nor does it imply endorsement of the items by the manufacturer.
Patented or trademarked technologies are those that are protected by intellectual property rights.
Public domain distribution technologies
- Drainfield rock distribution medium specifications and recommendations (wq-wwists4-40) Specifications for drainfield rock are provided for trenches, beds, at-grades, mounds, and sand filters in new and replacement systems, as well as for sand filters in existing systems.
Product registration letters
This series of letters to product makers specifies the circumstances under which the items may be used in the state of Minnesota.
Manufacturer’s manuals
Manufacturers must submit manuals during the registration process that contain product information, including design, installation, operation, and maintenance requirements, as well as homeowner information that is specific to use in Minnesota, including design, installation, operation, and maintenance requirements. All of the manuals may be found on the University of Minnesota’s Onsite Sewage Treatment Program’s web page, which can be found here:
- SSTS Media Products – Manufacturer’s Manuals for Minnesota Registered SSTS Treatment and Distribution Media Products
Infiltrator Systems Infiltrator Septic Tanks & Accessories
Manufacturers System of Infiltrators Septic Tanks with Infiltrator Accessories The page is loading. Items 1 – 12 of 12 are sorted as follows: Display Grid|Display List Items on a single page ADD TO CART VIEW CARTCHECKOUT ADD TO CART ADD TO CART
- IM-550C5-1 INFILTRATORIM-550C5-1 INFILTRATOR 552GAL POTABLE WATER TK 2PC POTABLE WATER TANK “BLUE” IM-550C5-1 INFILTRATOR 552GAL POTABLE WATER TK 2PC POTABLE WATER TANK “BLUE” QtyAvailable:B/O
- sIM1060P-2-C4 INFILTRATORIM1060P-2-C4 2CP (C-4 RATING) INFILTRATOR 1060GAL SEPTIC TANK (INFILTRATOR) (62.2″W x 127″L x 54.7″H) QtyAvailable:132 ea
- IM-1280C5-1 INFILTRATORIM-1280C5-1 INFILTRATOR 1287GAL POTABLE WATER T 2PC POTABLE WATER TANK “BLUE” QtyAvailable:132 ea
- IM-1280C5-1 INFILTRATORIM-1280C5-1 INFILTRATOR 1287GAL POTABLE WATER T 2PC POTABLE WATER QtyAvailable:B/O
- IM-1760C4-1 INFILTRATORIM-1760C4-1 INFILTRATOR 1765GAL POTABLE WATER 2PC POTABLE WATER TANK “BLUE” QtyAvailable:B/O
- IM-1760C4-1 INFILTRATORIM-1760C4-1 INFILTRATOR 1765GAL POTABLE WATER 2PC POTABLE WATER TANK ” QtyAvailable:B/O
- sADF-2400 INFILTRATORADF-2400 INFILTRATOR SEPTIC TANK CONCRETE ADAPTER FLANG INFILTRATORADF-2400 INFILTRATOR SEPTIC TANK CONCRETE ADAPTER FLANG INFILTRATORADF-2400 INFILTRATOR SEPTIC TANK CONCRETE ADAPTER FLANG INFILTRATORADF-2400 INFILTRATOR SEPTIC TANK CONCRETE ADAP IM540P-1 INFILTRATORIM540P-1 INFILTRATOR 540GAL SEPTIC TANK 1CP EQtyAvailable:17 ea
- IM540P-1 INFILTRATORIM540P-1 INFILTRATOR 540GAL SEPTIC TANK 1CP (C-4 RATING) “Also known as: PUMP TANK” (61.7″W x 64.9″L x 54.6″H) SCT-0100 INFILTRATORSCT-0100 SCT-0100 INFILTRATORSCT-0100 ISI-1500 ISI-1500 INFILTRATOR RISER SILICONE SEALANT QtyAvailable:B/O
- IM1530P-2-C4 INFILTRATORIM1530P-2-C4 INFILTRATORIM1530P-2-C4 INFILTRATOR 1530GAL SEPTIC TANK 2CP (C-4 RATING) INFILTRATOR 1530GAL SEPTIC TANK (62″W x 176″L x 55″H) The quantity available is 16 pieces. InfiltratorsSNAPRIS-B2406-HP INFILTRATORSNAPRIS-B2406-HP INFILTRATOREZSNAP IM 24″X6″ RISER (BLACK) “NEW STYLE” “Sold with Screws”QtyAvailable:164 ea SNAPRIS-B2412-HP INFILTRATORSNAPRIS-B2412-HP INFILTRATOR EZSNAP IM 24″X12” RISER (BLACK) “NEW STYLE” “Sold with Screws” SNAPRIS-B2412-HP INFILTRATOR EZSNAP IM 24″X12″ RISER (BLACK) “NEW STYLE” “Sold with Screws” 98 pieces are currently available. IMLID-2400 INFILTRATORIMLID-2400 INFILTRATOR EZSNAP IWT IM 24″ RISER LID “NEW STYLE” “Sold with Screws” INFILTRATORIMLID-2400 INFILTRATOR EZSNAP IWT IM 24″ RISER LID “NEW STYLE” “Sold with Screws” INFILTRATORIMLID-2400 INFILTRATOR EZSNAP IWT IM 24″ SNAPPAR-2400-HP-2 INFILTRATORSNAPPAR-2400-HP-2 INFILTRATOR EZSNAP IM 24″ PIPE ADP RNG “NEW STYLE”QtyAvailable:70 ea
- SNAPPAR-2400-HP-2 INFILTRATORSNAPPAR-2400-HP-2 INFILTRATOR EZSNAP IM 24″ PIPE ADP RNG “NEW STYLE”Qt
View your shopping cart after you’ve added anything to it The following items are available for checkout: 1 – 12 of 12 ItemsItems per pagePage 1 of 1
Rather than standard PVC tubing and crushed stone, the Infiltrator chambers have a 4 foot vaulted ceiling. Chambers are buried and sealed together at their ends, with dome-shaped end plates capping the structure, which is the size of a big half-tube construction. Wastewater from a septic tank flows freely into the chambers and is efficiently filtered into the soil absorption region by a biological filter. Septic outflow can also be divided by a distribution box, allowing the chambers to run parallel to one other and so reducing the footprint of the leach field to a minimum.
- This is the first plastic leach field chamber that was invented over 25 years ago
- It is called the Infiltrator. More than 1 million systems have been deployed, with more than 27 million units now in the ground in all 50 states and 13 countries, according to the company. It may be used in place of traditional rock and perforated pipe leach fields since it does not require any rock. All you have to do is dig your trench, insert the chambers into the earth, snap them together end-to-end, then backfill with the original dirt
- The Quick4 variant allows for a 10-degree left or right turn between chambers, allowing for greater flexibility in accommodating natural terrain characteristics and avoiding potential impediments. The chambers are composed of chemical-resistant polyethylene, which ensures that they will not rot or corrode. This product is made entirely of recycled materials. Infiltrator is a recycling company that ranks among the top 10 in the United States. Using a powerful arch design, wheel weights of 16,000 pounds per axle can be supported, which is comparable to an AASHTO rating of H-10. Additionally, H-20 units are available. ISO 9002 certified, as well as I.A.P.M.O. and UPC-approved
- ISO 9002 registered and I.A.P.M.O. and UPC-approved
- All Infiltrator products are backed by a limited lifetime guarantee.
Chambers for infiltration are exclusively available from our yard in San Luis Obispo, California.
| Infiltrator Leach Field Systems | ||||||
| Part Number | Capacity | Weight | Chamber Description | Dimensions | Price | |
|---|---|---|---|---|---|---|
| LINQ4HC | 70 gal | 14 lbs | Quick4 High-Capacity H-10 | 48″long x 34″wide x 16″tall | $62ea | |
| LINQ4HCE | n/a | 5 lbs | Quick4 High-Capacity Multi-Port End Plate | 19″long x 34″wide x 16″tall | $31ea |
To get a PDF version of the drawing, click on the link below. Here’s where you can get a free copy of Adobe Reader. Tank size and fitting placement may vary significantly depending on the manufacturer. Specifications are subject to change at any time and without prior notification.
Infiltrator Systems VS Traditional StonePipe Systems
A 12-foot length of Infiltrator chamber trench has a more effective infiltrative area than a 25-foot length of stone and pipe trench.-| Infiltrator Systems | Traditional StonePipe System |
|---|---|
- Two individuals can easily assemble and install this product. All that is required is a backhoe and a pickup truck. Small, lightweight chambers that can be supplied in a single pickup truck load and manually moved into position are available. It is possible to infiltrate wastewater through the whole trench bottom with 100 percent efficiency. There is less regrading, tree damage, and stone cleanup
- There is also less noise. There is an inspection port accessible for simple access to the leach field without causing any site interruption. Geotextile is not required in solid-topped chambers. In general, reduced costs
- Installation will be labor-intensive and time-consuming
- A dump truck will be required for stone delivery. Stone carrying increases soil compaction and increases the cost and time associated with it. The presence of stone in a trench lowers the Long-Term Acceptance Rate by more than 50%. Heavy activity through the yard and spilled stone indicate that extra site restoration will be required following the installation. The system does not allow for easy inspection and monitoring of the leach field without the need to dig up the yard
- On top of the stone, a geotextile is necessary. Costs have gone up overall
- Installation is simple, and there are cost benefits. Reduced site disturbance due to engineering for maximum performance Superior technology
- Long-term durability and dependability
- Product availability
- And quick response time.
Wastewater Options Explained to the Public
The Infiltrator Chamber System is a type of filtration system. The Infiltrator Chamber System, which was created by Infiltrator Systems Inc., is the current choice for residential septic systems in residential buildings. It is intended to be used in place of typical stone and pipe leach fields, and it provides significantly more infiltration and storage capacity than a stone and pipe system of comparable size. Septic tank infiltrator leaching chambers are arching structures with an open bottom that are molded from Poly Tuff, a unique combination of polyolefin plastic that is chemically resistant and has been used in septic tanks, pipelines, and distribution boxes for several years.
Interlocking of these chambers is a breeze, as is putting them together in trench of bed configurations (see illustration).
Infiltratorchambers meet or exceed the standards of state and municipal health codes in 49 states. Infiltrator chambers can withstand severe truck traffic (16,000 lbs/axle load rating) even when just 12 inches of compacted fill is used to cover the chambers.
| The Infiltrator Chamber System1:The SideWinder �sidewall providesthe maximum infiltrative surface area2:Solid top prevents intrusion of fines andflooding whenit rains3:Large storage volume accommodates peak flows ofeffluent4:Entire bottom of trench is open forunobstructed infiltration into soil | Stone and Pipe1:Soil may intrude through unprotected surfaces2:Geotextile required to prevent soil intrusion3:Solids build up between stones, limitinginfiltration4:4″ perforated pipe does not provide even distribution |
Septic Systems Installed on-Site A septic system is a type of onsite wastewater treatment system that processes and filters household waste on a residential property (effluent). The effluent is composed of two types of water: blackwater (toilet wastes) and greywater (kitchen sink, bathtub and laundry wastes). A septic system is made up of two parts: a septic tank and an aleachfield or drainfield (also known as a leachfield). The septic tank serves as the primary treatment facility, where microorganisms break down organic compounds in the effluent.
Bacteria finish the digestion and purification process in this area as the wastewater slowly leaches or infiltrates into the soil over time.
at 6 BusinessPark Road, P.O.
Infiltrator Systems Inc.
