What Does It Look Like When You Open A Septic Tank Lid? (Solved)

  • The septic tank lid will be a square piece of concrete located near the center of the tank. It will be approximately 18 inches square, depending on the model tank you have. Remove the dirt well away from the edges of the lid and attempt to slant the sides of the hole to help prevent dirt from shifting and sliding down onto the lid.

What does the cap of a septic tank look like?

During the search, keep an eye out for a circular lid approximately two feet wide. Septic tank lids are typically green or black plastic; sometimes they are made of concrete. It’s not always easy to find the lid, though, as unkempt grass, dirt, or debris can conceal the septic tank lid.

How do you tell if your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

  1. Your Drains Are Taking Forever.
  2. Standing Water Over Your Septic Tank.
  3. Bad Smells Coming From Your Yard.
  4. You Hear Gurgling Water.
  5. You Have A Sewage Backup.
  6. How often should you empty your septic tank?

Do septic tanks have two lids?

Locate The Lid A septic tank installed before 1975 will have a single 24-inch concrete lid in the center of the rectangle. A two-compartment tank installed after 1975 will have two lids of either fiberglass or polyethylene, centered at opposite ends of the rectangle.

What size are septic tank lids?

Available in 12″, 16″, 20″ and 24″ diameters. Green only. 12″ Tall Riser – For septic tanks.

How far down is a septic tank lid?

Often, septic tank lids are at ground level. In most cases, they have buried anywhere from four inches to four feet underground.

How do septic tanks look?

Septic tanks are typically rectangular in shape and measure approximately 5 feet by 8 feet. In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground. You can use a metal probe to locate its edges and mark the perimeter.

What to do after septic is pumped?

After you have had your septic tank pumped by a trusted septic company, there are some things you can and should do as the septic system owner.

  1. 1) Get on a Schedule.
  2. 2) Take Care of the System.
  3. 3) Know the Parts of Your System.
  4. 4) Check Other Possible Issues.

How often should a septic tank be pumped?

Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.

How do you know if your septic system is failing?

The first signs of a failing septic system may include slow draining toilets and sinks, gurgling noises within the plumbing, sewage odors inside, continuing drainage backups, or bacteria in the well water. The area of the strongest odor will point to the location of the failure in the septic system.

Can I shower if my septic tank is full?

Only the water would get out into the leach field in a proper system unless you run too much water too fast. The thing to do is to run your shower water outside into it’s own drain area, but it may not be allowed where you are. Used to be called gray water system.

How do I check my septic tanks sludge level?

To measure the sludge layer:

  1. Slowly lower the tube into the septic tank until it touches the bottom of the tank.
  2. As the device is slowly pulled out of the water, the check valve closes capturing a liquid/solid profile of the septic tank water. The thickness of the sludge layer can be measured.

How to Find the Lid on a Septic System

All septic tanks eventually fill with sediments and must be pumped out on a regular basis in order to remain in excellent functioning order. If the tank’s lid is not on a riser at ground level and you are not the home’s original owner, you may be unable to determine where the lid is located. A typical septic tank is 4 inches to 4 feet underground, with all of its components, including the cover, buried between 4 inches and 4 feet underneath. This is true regardless of whether the septic tank is equipped with special risers that keep the lid flush with the surface of the ground.

Consult A Map

First, choose with the most straightforward choice. The installation of septic tanks at all locations is recorded in most counties’ permission records, which are kept on file for future reference. Typically, this will include a schematic indicating the placement of the tank on the land, as well as certain dimensions that will allow you to measure to the precise site of the tank. If your tank was placed before your county made it a requirement to record the location of such tanks, you may find yourself with nothing to show for your efforts.

Search For A Sign

Septic tanks are placed in such a way that they are as unnoticeable as possible on the land. After the grass has grown back after installation and some time has passed, it is possible that just a few visual indications will remain. Pay particular attention to the contours of your yard for any inexplicable high or low points that might suggest the presence of an underground storage tank.

Follow The Pipe

Installation of the septic tank takes place along the sewage line that runs from the house into the front yard. Locate the 4-inch sewage pipe at the point where it exits the home in the basement or crawl space, if it is there. Locate the same spot outside and make a note of it. Insert a thin metal probe into the earth, identify the 4-inch sewage line, and follow it across the yard, probing every 2 feet, until you reach the end of the property. Septic tanks are required to be at least 5 feet apart from the home in all states except Alaska.

Whenever the probe makes contact with flat concrete, fiberglass, or polyethylene it indicates that the tank has been located.

Locate The Lid

The majority of septic tanks are rectangular in shape and measure around 5 feet by 8 feet. Investigate the tank’s circumference to determine its boundaries and outline the rectangle’s boundary using a pencil. A septic tank that was built before 1975 will have a single concrete lid that is 24 inches in diameter in the center of the rectangle. If the tank was built after 1975, it will have two covers made of fiberglass or polyethylene, centered at the ends of the rectangle and centered at the ends of the rectangle.

It should be possible to uncover the lid or lids by digging with a spade in specific spots, depending on when year the tank was constructed.

Call A Professional

Opening a septic tank is a job best left to the pros once the lid has been discovered. Concrete septic tank lids are extremely heavy, and many require the use of lifting tools to remove them completely. An open tank has the potential to release toxic gases. Anyone going around on the property who comes into contact with an exposed septic tank might be in risk. Because of the noxious vapors present in an open tank, falling into one can be lethal.

Mark The Spot

Make a note on the ground near where the tank was pumped by a professional and the lid was buried to serve as a reference in the future. In order to keep track of where you are, you should choose a hefty circular patio tile that is embedded in the ground. Additionally, draw your own map of the area and store it with your other important papers.

How to Find Your Septic Tank Lid

Previous PostNext PostWhether you realize it or not, it is critical that you be aware of the position of your septic tank lid and the septic tank itself. Despite the fact that septic tanks are fairly huge, they can be difficult to identify, particularly if they have not been properly maintained over time. Continue reading to find out how to locate your septic tank lid.

Why It’s Good to Know Where to Find Your Septic Tank Lid

Knowing the location of your septic tank is a fantastic approach to spot septic tank problems as soon as they occur. Consider the following scenario: If you saw water near your septic tank lid, you would know right away that you could have a problem with your system being overloaded with waste. Furthermore, by understanding where your septic tank is located, you may avoid parking cars on top of it, which might cause the tank to collapse and create flooding. You’ll also be able to point service personnel in the right direction for septic tank services, which will eventually save them time and money while also saving you money.

How to Find Your Septic Tank Opening

Knowing how critical it is to know where your septic tank lid is located, it’s time to go out and find one for yourself. Keep an eye out for a circular lid that is roughly two feet in diameter during your quest. Septic tank lids are normally constructed of green or black plastic, however they can occasionally be made of concrete. It is not always simple to locate the septic tank lid, however, because untidy vegetation, mud, or debris might obscure the lid’s location. If you live in a snowy climate, seek for a spot of lawn where the snow melts more quickly than it does anywhere else on the property.

How to Find Your Septic Tank Lid as a New Homeowner

During the process of purchasing your house, you should have been provided with a map of your property that showed the location of your septic tank. This is normally included as a part of your home inspection service package. All you have to do from there is compare the diagram to your land, find the septic tank location, and potentially dig around it to check whether the lid has been hidden by vegetation or other obstructions.

People have been known to place an object such as a huge rock on top of the septic lid, so be sure to look beneath landscaping stones as well.

How to Find Your Septic Tank Lid as an Existing Homeowner

Still having trouble locating your septic tank lid? There’s a significant probability it’ll end up in the ground. The pipes coming from your basement should be followed, as they will take you in the direction of your septic system, which is what we propose. Then, once you’ve determined the correct direction, check for any high or low points in the yard that might reveal the location of your septic tank. You can find the lid of your septic tank by probing the ground with a metal probe every few feet with the probe.

Because most lids have a metal handle or fastener on them to hold the lid closed, you may also use a metal detector to find them.

The majority of lids are buried up to a foot deep, but some lids might be buried as deep as four feet in extreme cases!

How to Maintain Your Septic Tank Lid

Following the discovery of your septic tank lid, keep it in good condition to avoid damage and ensure simple access for future septic tank maintenance, such as pumping your septic tank every three- to five-year period. Here are some pointers for keeping your septic tank lid in good working order:

  • Keeping the grass around the septic tank lid regularly mowed is important. Remove any dirt or debris that may have accumulated on your septic tank lid
  • Mark the area to ensure that no one parks or constructs structures there. It is possible to do this using a flag, garden décor, or ornamental pebbles.

Professional Septic Tank Services

Is it difficult to find trustworthy septic tank services or septic tank installation? If you are looking for septic tank installation, inspection, and cleaning services, check with your local Mr. Rooter ® Plumbing franchise. Mr. Rooter charges a set amount up front, with no overtime fees or additional expenses. To get started, call us at (855) 982-2028 or fill out our online estimate request form. Is the lid of your septic tank obscured by grass? Inquire with The Grounds Guys about routine lawn care and upkeep.

Rooter, is a member of Neighborly’s network of dependable home service experts, which includes Mr.

By hiring The Grounds Guys to provide trustworthy grass mowing and landscape care services, you can be assured that your septic tank lid will always be simple to locate.

Procedure for Opening Septic Tanks

  • ASK a question or make a comment about how to open a septic tank safely and properly for inspection or cleaning.

InspectAPedia does not allow any form of conflict of interest. The sponsors, goods, and services described on this website are not affiliated with us in any way. Instructions on how to open the septic tank. The location of the septic tank cleanout or cover, as well as the access and opening processes. We discuss some of the things to look for before opening the septic tank, such as subsidence, indications of recent work, and septic tank coverings that are not suitable to use. Then we demonstrate how to remove the septic tank lid or the access port cover from the tank.

For this topic, we also have anARTICLE INDEX available, or you may check the top or bottom of the page. Use the SEARCH BOX to discover the information you’re looking for quickly.

Procedures for Safe Opening of a Septic Tank, Cesspool, or Drywall for Inspection or Cleaning

The following are the contents of the article:

  • How to remove the lid from a septic tank
  • When it comes to pumping out the septic tank, which septic tank entrance should be used? Why
See also:  How Dhow Do I Fix A Leaking Septic Tank In Va?

In this septic tank pumpout article series, you’ll learn how to locate, open, pump out, clean, and inspect conventional septic tanks, as well as how to locate, open, pump out, clean, and inspect conventional septic tanks using photos. In addition to septic pumping tank truck operators, this guideline is meant to provide basic information to homeowners and septic service providers that are concerned about septic system maintenance.

  • There is a risk of dangerous, perhaps deadly collapse due to subsidence (depressions or low regions in the earth) near the location of the septic tank. Evidence of recent construction activity that may necessitate further investigation in order to determine the status of the septic system
  • Backup or effluent breakout at the surface of the ground in the septic tank region.
  • Here is an example of a septic tank cover that was discovered atop an unstable home-made collection of concrete blocks that had been piled by the owner to serve as an access well to his septic tank. Because the masonry blocks were misaligned and loose, and because the tank aperture into which the cover opened was bigger than the cover, there was a serious collapse risk that may have resulted in a deadly hazard. We covered the area with plywood and roped it off, and we quickly informed the residents and the property owner of the situation, both verbally and in writing

Procedure for Opening the Septic Tank Pumping Access Port

Here is an example of a septic tank cover that was discovered atop an unstable home-made collection of concrete blocks that had been placed by the owner to serve as an access well for their septic tank. Because the masonry blocks were misaligned and loose, and because the tank aperture into which the cover opened was bigger than the cover, there was a hazardous collapse risk that may have resulted in a fatality. When we arrived, we promptly covered the area with plywood and roped it off, and we informed the inhabitants and property owner of the situation in person as well as via written notice;

Reader CommentsQ A

@Ron, In order for a concrete septic tank lid to be correctly erected, it must feature both access openings and cast in iron loops to which a hoist may be attached. Alternatively, if your septic tank cover does not have those points of purchase for lifting, you will require a flat bar and a larger wrecking bar to pry up the excavated lid from the septic tank sufficiently to allow you to put a chain around the lid, most likely two Chainz, and lift the lid with a hoist and tripod mechanism or you will use an on-site motorized hoist.

  1. 1/2 x 27/4 removing the top of a septic tank @Phil, Although what you describe is theoretically doable, it may be less expensive and more rational to do so in a different way.
  2. This is due to the fact that just stitching a circular hole does not ensure that I am creating a hole through which the lid will not be dropped.
  3. Edge My concrete septic tank, which was constructed when the home was built in 1979 and does not have any manholes or openings for pumping out, is in poor condition.
  4. Is it feasible to cut two manholes using a concrete saw that are 20″/24″ in diameter and then build risers and a cover on top of them?
  5. Could you please share a picture of the tank top?
  6. It is common for the concrete top to be tapered; nevertheless, it may just be trapped by effloresent salts and filth.
  7. I have a feeling that simply tugging will not be effective.

This would have stopped leaks but would have made it extremely difficult to open the tank for the next person who needed to open the tank.

Repeat this process many times all around the cover’s perimeter.

For me, this has worked almost every time in the past.

It is recommended that you build a septic tank riser that is sealed to the tank top, as well as a new secure cover on top of the riser if your septic tank lid is not near to the ground level.

Never work on your own.

I’ve erected two wood 4x4s on top of the lifting ring to provide additional support.

All I’ve done three times is shattered those 4x4s.

Do you have any recommendations?

A septic tank pumping provider can remove plastic bags, tiny pebbles, and other debris from your tank, as well as the sediments, scum, and sludge that has accumulated there.

What is the best way to get them out?

When the septic tank is pumped out, does it make sense to place a plastic bag over the top opening of the tank to keep the odors contained?

Gerard A plastic bag as a sewer line cap doesn’t sound right to me – it’s not durable, it’s the wrong material if a cap is required, and if it’s a vent rather than an access pipe, the vent must be open to the atmosphere and protected from animal entry.

What is the function of this item?

A typical septic tank is equipped with clean out access covers that are strategically placed.

Maybe something as simple as a flat piece of concrete or stone will be sufficient, or maybe something more complex.

To be completely honest, I would have expected the contractor who dug the hole to be responsible for ensuring that the system was repaired and safe.

What should I do to fix it?

What store would I go to in order to purchase septic tank covers?

A few years ago, I had a brand new house built for me.

I have three plastic polylok lids the one for the pump is above ground.

I would like to get risers to make all three at about 6 inches below ground level.

but a little harder to get at pump if necessary.

will the grass at only 6 inches dirt.

or by some law does the pump cover have to be above ground.

Thanks for your help.

What tool do I need to open septic with true bolt?

My septic tank has two openings. Do both have to be opened for a pump out?

Question:cannot find the manhole cover of the septic tank

(8th of August, 2014) “We’ve located the cesspool concrete lid (about 12 foot diameter), but after digging a 2 foot perimeter, we were unable to locate the manhole cover, which was required for an inspection.” vicki levin stated Help? My husband is becoming increasingly upset with the digging!

Reply:

If it’s a cesspool, rather than a septic tank, and it’s spherical, the access lid is normally located in the center of the container.

Question: how do i remove septic tank lid that is stuck

The entrance lid would normally be in the center of the cesspool, if it is in fact a cesspool rather than a septic tank, and it is spherical.

Reply:

Anon:WARNING: If the septic tank cover, lid, or access aperture has partially caved in or sank into the tank, the condition is extremely dangerous – an unsecure cover implies that someone might fall into the tank, which is generally lethal very quickly. Please keep everyone away from the septic tank area until such time as you have had the tank inspected and opened for additional inspection by a professional. Depending on the tank type and condition, lifting the lid may necessitate the use of a pry bar or wrecking bar, as well as a small portable winch (which is unusual).

Alternatively, consider the following:

Septic Pumping ProcedurePumper Truck Operation Articles

  • PROCEDURE FOR SEPTIC TANK INSPECTION
  • MISTAKES MADE IN SEPTIC TANK PUMPING
  • PROCEDURE FOR SEPTIC TANK PUMPING
  • HOW TO CLEAN A SEPTIC TANK
  • WHEN TO CLEAN A SEPTIC TANK
  • WHEN NOT TO PUMP A SEPTIC TANK
  • HOW TO FIND A SEPTIC TANK
  • HOW TO OPEN A SEPTIC TANK
  • INSPECT THE SEPTIC TANK BEFORE PUMPING
  • SEPTIC TANK INSPECTION PROCEDURE
  • SEPTIC TANK LEVELS OF SEWAGE
  • PUMPER TRU

Suggested citation for this web page

HOW TO OPEN A SEPTIC TANK at Inspect a Tank An online encyclopedia of building environmental inspection, testing, diagnosis, repair, and issue preventive information is available at Apedia.com. Alternatively, have a look at this.

INDEX to RELATED ARTICLES:ARTICLE INDEX to SEPTIC SYSTEMS

Alternatives include asking a question or searching InspectApedia using the SEARCH BOXfound below.

Ask a Question or Search InspectApedia

We encourage you to use the search box just below, or if you prefer, you may make a question or remark in theCommentsbox below and we will get back to you as soon as possible. InspectApedia is a website that allows you to search for things. Please keep in mind that the publication of your remark below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link. Your submission will appear when it has been reviewed by a moderator. We sincerely apologize for the inconvenience.

Technical ReviewersReferences

Citations can be shown or hidden by selecting Show or Hide Citations. InspectApedia.com is a publisher that provides references. Daniel Friedman is an American journalist and author.

How to Open a Septic Tank Lid

Find the location of the septic tank. The tank must be at least 10 feet away from the house foundation, according to most building rules. The location and direction of the drain as it exits the house should offer a good indication of the tank’s location and direction. For the purpose of locating the tank, it may be required to drill a number of test holes.

Step 2

Remove the dirt off the top of the tank using a shovel. The lid of the septic tank will be a square piece of concrete that will be installed at the center of the tank’s interior. Depending on the kind of tank you have, it will be around 18 inches square at the most. Remove the dirt from the lid’s edges as much as possible, and try to slant the sides of the hole to assist prevent dirt from moving and sliding down the sides of the hole.

After you have removed all of the loose dirt, whisk away any leftover dirt. It is critical to remove as much dirt as possible from the tank so that none will enter the tank when the lid is removed.

Step 3

Make a small indentation with the screwdriver in the seam surrounding the lid. As soon as the seam begins to open slightly, insert one edge of the pry-bar into it and pry it upwards. Because the lid may be fairly heavy, you should have a companion nearby to assist you in removing it from the hole. Keep an eye out for any cracks or chips in the tank’s borders or the lid itself when doing this procedure. It is critical to have a tight, smooth seal between the lid and the tank when using this method.

Tip

In order to avoid accidentally back-filling the hole when the repairs are finished, make a note on it. It is best to indicate the placement of the tank lid with a tiny stepping stone that is flush with the surface of the ground. If you need to re-open the tank in the future, you will save time and effort by doing so now.

Warning

Never go into a septic tank or allow anybody else to get into one. Suffocation and death can occur quickly as a result of the gases and lack of oxygen.

How to Locate Your Septic Tank Lid

Despite the fact that septic tanks are vast, they can be difficult to identify, especially if they have not been properly maintained over time. It is critical to be aware of the location of your septic tank lid and septic tank, whether or not you are aware of it. You must be aware of the location of your dishwasher, toilet, and sewage line in order to properly care for these appliances. Despite the fact that septic tanks are vast, they can be difficult to identify, especially if they have not been properly maintained over time.

Continue reading to find out how to locate your septic tank lid.

Why It’s Important to Know Where Your Septic Tank Lid Is

Locating the location of your septic tank is a good first step in diagnosing septic tank problems as soon as they occur. Consider the following scenario: If you notice water near your septic tank lid, you’ll know right away that there might be an issue with your system being overloaded with waste. Aside from that, understanding the location of your septic tank allows you to prevent parking cars directly on top of it, which might cause the tank to collapse. You may also lead service experts to the appropriate location for septic tank services, saving them both time and money in the process.

How to Locate Your Septic Tank Opening

Knowing why it is so critical to know where your septic tank lid is located, you may begin the process of locating the lid. During your search, keep an eye out for a circular top that’s around two feet broad and roughly two feet in diameter.

Septic tank lids are often constructed of green or black plastic, although they can also be built of concrete. It is not always simple to locate the septic tank lid, however, because grass, mud, and other debris might obscure the opening.

How to Locate Your Septic Tank as a New Homeowner

During the process of purchasing your house, you should have been provided with a schematic of your property that showed the location of your septic tank. Your home inspection will most likely include this service. Check the diagram against your home to see where your septic tank is located. You may need to dig around the tank to determine whether the lid has been hidden. Consider placing a large item, such as a boulder, on top of the septic lid to serve as a reminder of its location.

See also:  How Close To Septic Tank Foundation? (Correct answer)

Septic Tank Maintenance

It is important to keep your septic tank lid in good condition in order to avoid damage and to make it easier to access for future cleaning and maintenance. Consider trimming the grass surrounding your tank lid on a regular basis, eliminating all dirt and trash, and marking the area so that you can easily identify where the tank lid is.

Get in Touch With B D Today!

Are you dealing with any plumbing issues that necessitate the intervention of a professional? Are you dealing with a plumbing problem that simply must be put off any longer? Inform B D Plumbing of the situation. Plumbing services are provided across the greater Washington, D.C. metropolitan region, including Maryland and Northern Virginia, by B D Plumbing Inc. Get in contact with us by dialing (301) 595-1141 or by following us on social media, which includes Facebook, Twitter, LinkedIn, and Pinterest (to name a few platforms).

This item was posted on Friday, April 17th, 2020 at and is filed under Uncategorized.

How do you open a septic tank lid?

  1. Find the location of the septic tank. Most building rules require that the tank be located at least 10 feet away from the house foundation
  2. Remove the soil off the top of the tank. The septic tank lid will be a square piece of concrete that will be installed at the center of the tank. Insert the screwdriver into the seam along the lid’s perimeter

The majority of septic tank lids will require the use of a pry bar to be removed from their mountings. Set the prybar in the seam and push it down until it is secure. During the process of the lid lifting out of the hole, have someone slide it to the side. Place thelidon the surface of the ground so that it is out of the path of the pumping truck. As an example, how do you remove a concrete septic tank lid from its mounting bracket? Remove theSepticTank LidPlace a pry bar between the top of theseptictank and the bottom of thelid.

  • One end of the concrete septic tanklid may be lifted up by pressing down on the pry bar.
  • Start by inserting a tiny metal probe into the ground and following it across the yard, probing every 2 feet until you find the 4-inch sewage line.
  • The majority of them are between 10 and 25 feet distant.
  • A modest amount of bleach from a load of laundry will have no effect on the bacteria and water in your septic tank, which holds several thousand gallons.

With each flush, they emit bleach and other chemicals into the environment, making them unfit for use in septic systems. Never flush uncooked cleaners, bleach, or other home chemicals down the toilet or down the sink.

How to Find a Septic Tank Lid

Septic tanks are installed on certain properties, and it is a good idea to be aware of where your tank is located. The first stage will be to locate the septic tank lid, whether it is to prevent damage to the tank and drain field from heavy equipment, to locate the tank for excavating reasons, or to conduct a self-inspection of the septic tank. We generally give this service to our customers while doing inspections or septic tank pumping, however we understand that some homeowners may prefer to discover it on their own.

Use the septic system plans if you have them.

The quickest and most straightforward method of locating a septic tank lid is to consult the original septic system drawings. The septic system drawings will include the position and dimensions of the tank in relation to the house. Simply measure the measurements of the septic tank lid using a measuring tape to determine where it is located. When it comes to septic system plans, it’s probable that your local board of health will have a copy if for some reason you don’t have access to them. It is common for the lid to be buried beneath the grass, necessitating some probing and digging.

The sewer pipe can be your guide to finding the septic tank lid.

Sometimes it’s difficult to locate septic tanks when using these blueprints, or you may not have a copy of your septic plans on hand. The sewer pipe in your basement is your next best chance if you can’t locate it. This is the pipe that transports all of the waste water from your home to the sewer. Take note of the location of the pipe in relation to the ground level. this will give you an idea of how deep your tank will be buried under the earth. In addition, you will need to determine how many feet the pipe is away from the inner corner of your residence.

Make your way to the location where you believe the drain pipe is exiting the building.

Use caution when opening a septic tank lid.

Opening the septic cover is the first step in checking the levels of your septic tank on your own if you’ve managed to discover it. Sitting septic tank covers, particularly the older concrete ones, are extremely heavy and difficult to shift. The cover may feature hooks or grips that make it simpler to raise, or you may need to use a tool such as a shovel as a lever to open it. Older septic tanks should be handled with caution since the lids of older septic tanks can grow unstable over time and are more prone to breaking.

A anyone falling into this tank, especially a child or a pet, would be in grave danger.

Because the exposed hole in the ground might be easily missed, never leave the open tank alone, even for a little moment of reflection.

The best course of action is to contact a professional septic service company to remove the lid, which will help to prevent unpleasant smells from escaping and the possibility of someone falling into the tank.

Measure the Levels of Your Septic Tank Yourself

While we provide a handy service to check the levels in your septic tank, you may also do so by yourself if you choose. To measure the amount of sludge, as we discussed in our previous piece, you can use a long stick or a two by four with an adhesive strip attached to one end, or you can acquire a special measuring equipment known as a “sludge judge.” Because the average septic tank contains 4-5 feet of water, it’s preferable to use a measuring stick that’s at least 7 feet long. If necessary, lower your handmade measuring stick or sludge judge down into the septic tank after you’ve opened the lid and maintained perfect verticality of the stick.

As soon as you feel the measuring stick make contact with the bottom of the tank, you may bring it back up and measure the amount of sludge by counting the number of inches of black material that is staining the stick.

As soon as you have an understanding of the levels in your septic tank, you can assess whether or not your septic tank requires pumping.

Need help? Call Grant Septic Tech.

We are well aware that doing things oneself is not always simple or straightforward. But that is precisely why we are here! Our family has been in the septic system business for more than 60 years, and we’ve seen just about everything. Alternatively, if you’ve had difficulties with any of these processes (or simply want to avoid the mess), simply give us a call – we know where to look for a septic tank lid and can complete a comprehensive check for $127. There will be no fee for the inspection if we discover that your septic tank requires pumping while we are there; you will only be responsible for the cost of the septic tank pumping while we are there.

We provide service in a wide range of places around Massachusetts.

Common Septic Tank Facts

Septic systems are a low-cost and frequently successful alternative to conventional sewer systems. Concrete tanks have been the most frequent since the 1940s, with 3 – 500lids for a 1000 gallon tank and 4 – 500lids for a 1500 gallon tank being the most typical. Tanks began to be equipped with 16″ square concrete plugs with a lifting bail in the late 1990s, allowing for easier access to both sides of the tank. Many tanks today are made of fiberglass or plastic. Over time, the concrete might degrade, and the lids may develop cracks or possibly shatter completely due to the pressure.

  • Even broken lids should be replaced for the sake of the public’s safety.
  • They get access to your septic tank by removing green covers that are 20 inches in diameter.
  • This is done in order to prevent anyone, especially children, from removing a lid and falling into the container.
  • A typical water level for a tank should be 6″ below the top of the tank, and the tank should be kept completely filled at all times.
  • The level of the water is often a good sign of potential problems.
  • Additionally, it might suggest a clogged intake line, which could be caused by roots, a damaged pipe, or a loose joint.
  • If there has been a lot of rain, the earth may get saturated, making it impossible for any additional water to seep through the soil to the surface.
  • If your tank has allowed particles to enter the field lines, this might cause the openings in the corrugated pipe to get clogged, preventing water from percolating through the soil as effectively as it should be.

An output filter may be placed to prevent particulates from entering the field lines, but it would need to be cleaned on an annual basis to ensure that this does not happen. Nonetheless, it is far less expensive than rebuilding field lines.

Safety Tips for Septic Tank Lids

The septic tank lid adds an extremely vital layer of security and safety to a septic system’s overall security and protection. It may also be used to prevent issues from arising in your septic system, in addition to serving as a safety measure. Septic tank lids promote safety by preventing children, animals, rains, and other material from entering the septic tank and clogging it. But, perhaps most critically, septic tank lids prevent gases and smells from escaping the septic tank system. Septic tanks contain potentially dangerous gases and germs that may be damaging to your health if not properly maintained.

How to Find Your Septic Tank Lid?

First, choose with the most straightforward choice. The installation of septic tanks at all locations is recorded in most counties’ permission records, which are kept on file for future reference. Typically, these feature a graphic indicating the placement of the tank on the property, as well as certain dimensions that allow you to measure to the precise site of the tank in question.

2. Search For A Sign

Septic tanks are placed in such a way that they are as unnoticeable as possible on the land. After the grass has grown back after installation and some time has passed, it is possible that just a few visual indications will remain. Pay particular attention to the contours of your yard for any inexplicable high or low points that might suggest the presence of an underground storage tank.

3. Follow The Pipe

Installation of the septic tank takes place along the sewage line that runs from the house into the front yard.

4. Visual Search

Pay attention for a circular cover that is roughly two feet in diameter. Septic tank lids are normally constructed of green or black plastic, however they can occasionally be made of concrete.

Here are a few general safety guidelines for septic tank lids.

  • No vehicle should be driven over the septic system, especially not the lid of the system. The septic tank lid is not designed to withstand heavy usage. The lid should be visually inspected immediately if you mistakenly drive over it in order to see whether there is any damage. For the best possible protection of the septic tank lid, always use the nuts and screws suggested by the manufacturer. Never leave a sewage tank that is partially or completely open unattended. Whenever you are installing or doing normal maintenance on your septic system, it is critical not to leave the tank unattended in order to avoid children or animals from entering the tank. Children should be taught that septic tank lids are not to be played with. Use a secondary septic tank cover, such as the Infiltrator Safety Star System, to keep the tank clean. If the primary septic tank lid is accidentally broken or removed, the safety star system offers a powerful second level of protection. Cracks or apparent damage to the septic tank lid should be checked on a regular basis. If you think that your septic tank lid has been damaged, please contact West Michigan Septic Sewer & Drain at 231-739-7423 or send us an online message.

Post navigation

In order to be prepared for the winter months ahead, it is critical to check your septic system before the snow begins to fall and the ground begins to freeze. The following are a few straightforward methods for winterizing your septic system and pipes, which can help you safeguard your home’s most critical utility. If your property is a rental or an AirBnB that isn’t constantly inhabited, these recommendations are very crucial to follow in order to avoid frozen pipes or a damaged septic tank in the future.

  1. 1.
  2. Cracks or leaks in your tank lid should be looked for.
  3. The drainage pipes of the tank should also be checked for blockages, debris, and other issues that might prevent appropriate drainage from occurring.
  4. It’s crucial to examine the tank lid for cracks or damage, and it’s as critical to make sure there are no water leaks within your home.
  5. Furthermore, if left unattended, a leaking faucet can cause significant internal damage.
  6. Prepare Your HomePipes for the Winter In the event that you will not be occupying a property throughout the winter, winterize your home and plumbing before the cold weather arrives.
  7. Having the septic system tested for symptoms of winter damage should be done when you first open the doors to the property in the spring.
See also:  How Long Is A Septic Tank Inlet Baffle Pipe?

Continue to let the water to flow.

This isn’t an issue for the vast majority of homes with children.

To be on the safe side, don’t leave a faucet running continually, and don’t overfill your holding tank.

If you’re concerned about your pipes freezing, insulate them and maintain the temperature in your home above 60 degrees Fahrenheit all year.

We strongly suggest that you get your septic tank pumped out every 2-4 years, and we provide clean out services throughout the year.

A septic backlog is the last thing you want to happen during a snowfall!

5.

When the ground is frozen, it may not seem like a big deal to park on a sand mound system or in the yard near your septic tank, but we urge that you avoid parking on or near your septic system at all times of the year, regardless of the season.

6) Do not plow snow away from the top of your septic tank.

It has been observed that tanks can freeze after snow has been plowed off the top because that layer of insulation has been gone.

Are you feeling prepared for winter?

We hope that these suggestions may assist you in being better prepared when the winter season comes in. Please contact us at 718-898-2333 if your tank is due for pumping at any time during the year. We are available 24 hours a day, seven days a week. Our staff is here to assist you!

How to Remove a Septic Tank Lid

A septic tank lid is the section of the sewage tank that is located at the top of the tank. This lid must be removed at least once every several years in order to completely empty the tank. Every three to five years, depending on the size of the tank, a homeowner will need to have the septic tank pumped out and cleaned. Avoid allowing the tank to become overflowing, causing it to begin backing up into the home or overflowing out of the opening. The tank suffers serious damage as a result of this.

Step 1 – Locate Septic Tank

A septic tank lid is the section of the sewage tank that is located at the top of the tank. This lid must be removed at least once every several years in order to completely empty the tank. Every three to five years, depending on the size of the tank, a homeowner will need to have the septic tank pumped out and cleaned. Avoid allowing the tank to become overflowing, causing it to begin backing up into the home or overflowing out of the opening. The tank suffers serious damage as a result of this.

Step 2 – Dig Up Septic Tank Lid

A septic tank lid is the section of the sewage tank that is located at the top of the tank. This lid must be removed at least once every several years in order to completely empty the tank. Every three to five years, depending on the size of the tank, a homeowner will need to have the septic tank pumped out and cleaned. Avoid allowing the tank to become overflowing, causing it to begin backing up into the home or overflowing out of the opening. The tank suffers serious damage as a result of this.

Step 3 – Pry Off Septic Tank Lid

The lid of the septic tank might be rather hefty, depending on the size of the tank. On all sides, it is a solid block of concrete that is perfectly flat. It could have a handle that you can pull on. Pry bars are required to remove the majority of septic tank lids from their resting positions. Set the prybar in the seam and push it down until it is secure. As the lid begins to rise out of the hole, have someone assist you in moving it to the side. Place the lid on the ground’s surface so that it is not in the path of the pumping vehicle.

How to Find Your Septic Tank

Over time, all septic tanks become clogged with sediments and must be pumped out in order to continue functioning properly. Septic tank lids are frequently located at ground level. The majority of the time, they have been buried anywhere between four inches and four feet underground. In the event that you have recently purchased a property and are unsure as to where your septic tank is located, this article will give instructions on how to identify your septic tank.

Noteworthy: While every property is unique, septic tanks are usually typically huge and difficult to build. As a result, and due to the fact that it requires constant pumping, you’re very certain to discover it in a location that can be reached by a huge truck while looking for it.

5 Ways to Find Your Septic Tank

1. Check with the municipal records. The most straightforward method of locating your septic tank is to review the building plans for your home that were approved by the local government. You should have received an application from the business that installed the septic tank, which should contain schematics and specifications that will help you to locate the precise location where the septic tank was installed. 2. Look for highs and lows in your data. The majority of septic tanks are constructed in such a way that they are barely noticeable.

  1. 3.
  2. Almost usually, your septic tank will be constructed near where the main sewage line exits your property.
  3. Septic tanks are typically positioned between ten and twenty-five feet away from a home’s foundation.
  4. When you do, that’s when your septic tank comes into play!
  5. Look for the Lid.
  6. You will most likely find two polyethylene or fiberglass covers positioned on opposing sides of the perimeter of your septic tank if it was built after 1975 and installed after 1975.
  7. Those areas should be excavated in order to disclose the lids.

Get in touch with the pros.

Lifting concrete lids will necessitate the use of specialized equipment.

A fall into an unprotected septic tank has the potential to be lethal.

Produce your own diagram of your yard, which you may file away with your other important house paperwork.

That’s all there is to it!

To book a plumbing service in Bastrop County, please contact us now!

How to Remove Septic Tank Lid: The Ultimate Step-by-Step Guide!

Sewage tank maintenance is made easier by understanding how to remove a septic tank lid properly.

Fortunately, the removal process is pretty basic and, in the majority of cases, does not necessitate the use of a professional’s assistance. This tutorial is meant to assist homeowners with removing the lid from their septic tank in a correct and safe manner. Let’s get this party started!

How to Remove Septic Tank Lid

Removing the cover of a septic tank is a pretty simple procedure. Because most septic tank lids do not come with a lock, they may be opened at any time with the proper tools and materials.

You’ll Need:

  • Screwdriver, shovel, pry bar, metal detector (optional), broom, and other tools

Step 1: Locate the Septic Tank

In most areas, septic tanks must be located at least 10 feet away from the house’s foundation in order to function properly. It is possible to monitor their whereabouts by tracing the path of the drain as it leaves the residence. It’s possible that you’ll need to call your local health department instead if you can’t follow it down through the drainage system. If they’ve given permits for the system, it’s probable that they have a record of the location of the septic tank. If they don’t, get in touch with a reputable septic system company and inquire as to where it could be hidden or hidden from view.

It is possible to locate the approximate position of the septic tank using a metal detector if the tank is buried underground.

As a result, a metal detector will undoubtedly assist you in your hunt.

If it makes contact with something substantial, you’ve discovered your container.

Step 2: Dig Up the Lid

Septic tanks are often located beneath ground level. A covering of dirt or grass is frequently placed on top of them to prevent mishaps and odors from escaping because they require little care aside from the biannual or triennial pumping. Bring a shovel or other digging instrument with you to assist you in excavating the earth once you’ve discovered the tank. The lid should be perfectly flat on the tank, with the exception of a little seam around the edge. Prevent dirt from dropping and sliding down onto the lid by digging out at least 16 inches of earth on all sides and around the top of it.

Most tanks feature two or three lids, depending on their size.

Step 3: Remove the Lid

Due to the fact that septic tank lids are often built of concrete or steel, they are extremely tough to force apart and remove. The handles on some tank lids are built in, whilst others need the use of a pry bar to raise them open completely. If the lid has handles, enlist the help of a friend or family member to assist you in removing the lid from the container. If it doesn’t, put a screwdriver into the seam surrounding the lid and the pry bar into the space created by the screwdriver. Then press the button all the way down.

  • Use caution when doing so to avoid damaging the lid.
  • Keep in mind that septic tanks with concrete lids weigh significantly more than those with steel covers.
  • In such instances, it is preferable to employ a contractor to remove the lid on your behalf in order to avoid injuring the lid itself.
  • That’s all there is to it!
  • When the pumping or repairs are finished, replace the cover on the hole in the right manner.
  • Then you can either cover the lid with dirt or plant grass on top of it to finish it off.

The position of the tank should also be marked with a sign or a beautiful stepping stone to make it easier to find afterwards. You will avoid having to deal with the trouble of moving the tank’s cover in the future if you do this.

Septic Tank Lid Safety and Precautions

Approximately 80% of all septic tank accidents are the result of improperly shut lids. Unfortunately, not everyone who accidently falls in is able to walk away without injury. Prevent a catastrophe from occurring by taking some of the following precautions:

  • Check the condition of the tank’s lids on a regular basis. Bolts, screws, and other locks should be used to secure the lids to prevent unauthorized entry. It is never safe to leave an open lid alone, even while it is being pumped or fixed. After working on the septic system, always double-check that the tank lids are properly closed and secure. Educate young children on the importance of not opening or playing with septic tank covers. Understand the exact location of the septic tank lids on your property
  • Vehicles and heavy gear should never be driven or parked on top of septic systems, since this may cause the lid to become dislodged or damaged. Stay away from the septic tank’s entry since the gases might knock you out. If you’re near a septic tank, don’t burn a cigarette or do anything else that may cause a fire. Septic tanks emit methane gas, which is very flammable and explosive. Whenever you are excavating outside, keep an eye out for hidden mechanical or electrical wires. No matter how precious something may appear to be, it is never safe to remove anything from a tank. Instead, you should hire an expert to collect it on your behalf. If someone falls into the tank, do not go in after them unless you are equipped to do so safely and effectively. Please dial 911 as soon as possible, and make sure the individual does not drown by placing a floating device in the tank.

Final Thoughts

We hope this tutorial was useful in assisting you with the procedure of lifting the lid of your septic tank! Allow us to conclude this piece with a final word of caution: until absolutely essential, leave the maintenance of your septic system to the experts. Open the lid only when you need to monitor the level of the tank’s liquids or gases. Wishing you the best of luck!

Leave a Comment

Your email address will not be published. Required fields are marked *