What Could Causes A Septic Tank Alarm To Go Off? (Correct answer)

flohawks.com

  • One of the common reason septic tank alarms go off is because of heavy rainfall. For example, heavy rain around your drain field might block water from flowing out of your septic system, resulting in your alarm going off. 2. Power Issues: Another reason septic tank alarms go off is a power failure.

What triggers a septic tank alarm?

Most septic tanks have an alert when there’s too much water inside of it and could cause some kind of backup or overflow if not dealt with promptly. Your float sensor will trigger your alarm box to sound off once that event has been triggered by detecting how high up in the tank the level is reaching.

Why would a septic tank alarm go off?

Septic tanks typically come with alarms for a good reason. The septic alarms are meant to go off when the water level in your septic system’s pump tank is either too high or too low because either condition can cause damage to the system and should be prevented.

Can heavy rain cause septic alarm to go off?

A heavy rain, or extended days of rain, can potentially cause the alarm to go off because the ground is saturated. The flow of water is not dissipating as usual.

Will a flooded septic tank fix itself?

Most septic tanks are not damaged by flooding since they are below ground and completely covered. However, septic tanks and pump chambers can fill with silt and debris, and must be professionally cleaned. If the soil absorption field is clogged with silt, a new system may have to be installed.

Why is my septic tank buzzing?

Humming: This is a common sound when the pump is running, but if the noise is constant, then the system might be running without actually moving any water. A common cause for this is the lack of a relief hole between the pump and the check valve, which will develop an air lock in your system.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

  • Your Drains Are Taking Forever.
  • Standing Water Over Your Septic Tank.
  • Bad Smells Coming From Your Yard.
  • You Hear Gurgling Water.
  • You Have A Sewage Backup.
  • How often should you empty your septic tank?

What does it mean when your sump pump alarm goes off?

Sump pump alarms typically start to go off when there’s too much water in the area. If the sump pump alarm is functioning properly, but it’s going off too regularly, that means there is too much water pooling in your basement.

Do all septic tanks have alarms?

All septic systems that use a pump to move wastewater from a septic pump tank to a drainfield or mound have an alarm installed in the house. The alarm goes off when wastewater is not being pumped from the septic pump tank to the drainfield or mound.

Can a lot of rain cause septic problems?

It is common to have a septic back up after or even during a heavy rain. Significant rainfall can quickly flood the ground around the soil absorption area (drainfield) leaving it saturated, making it impossible for water to flow out of your septic system.

How do you fix a septic tank that backs up when it rains?

Maintaining the septic system AFTER the heavy rains

  1. Do not send the basement sump pump water into the septic tank.
  2. Reroute any rainwater from your roof gutters away from the drain field.
  3. Stop using the garbage disposal and dishwasher.
  4. Reduce the number and duration of showers and if possible, take sponge baths.

How do I know when my septic tank is bad?

8 Signs of Septic System Failure

  1. Septic System Backup.
  2. Slow Drains.
  3. Gurgling Sounds.
  4. Pool of Water or Dampness Near Drainfield.
  5. Nasty Odors.
  6. Unusual, Bright Green Grass Above Drainfield.
  7. Blooms of Algae in Nearby Water.
  8. High Levels of Coliform in Water Well.

How do I reset my sump pump alarm?

Follow these 5 simple steps to reset your sump pump:

  1. Disconnect the power.
  2. Take the sump pump out of the basin.
  3. Clean out the sump pump.
  4. Return the sump pump to the basin and restart the power.
  5. Reset the sump pump.

What does a tank alert alarm mean?

A tank alert alarm is an electronic system that monitors liquid levels in sump pump basins, holding tanks, sewage and other non-potable water systems. The alarm elicits a warning horn when it detects threatening liquid levels.

How often should you pump your septic tank?

Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.

What do I do if My Septic Alarm is Going Off?

In the event that your septic alarm goes off, it may surely create some anxiety and uncertainty; and if you happen to be experiencing this right now, then you’ve arrived to the correct location! Don’t be concerned; it does not necessitate urgent action. Instead, take your time to go through this full essay so that you will be prepared to act now or in the future if the situation arises. What Septic Systems Are and How They Work The alarm works in conjunction with the septic system to alert you when the water level within the pump tank has increased to an unsafe level or has decreased to an unsafe level.

The timer is in charge of regulating the time intervals during which the pump is permitted to pump wastewater into the drainage system.

Thus, during periods of excessive water use, the drain field is kept from getting overflowing, which might cause damage to the drainage system.

A large amount of water is injected into the system in between pumping cycles for whatever cause, and the water has nowhere else to go but back into the system’s pump tank.

Depending on how much water was and continues to be put into the system and how the pump is set up to operate on a timer, it may take many pumping cycles until the water levels are returned to normal.

  1. There is an excessive amount of water being put into the septic system. This is the result of excessive water consumption, which could be caused by several loads of laundry, an excessive amount of dishwashing, or a disproportionate number of long showers.
  1. Somehow, groundwater is making its way into the system. If there is an excessive amount of standing water surrounding the septic tanks, whether generated by rain or another source, the water may seep into the tanks and cause the internal water level to rise.
  1. It’s possible that one of the components of the septic system is malfunctioning. If anything goes wrong with your system — including the pump and floats — the alarm and timer will go off and the septic system will stop working correctly.

The Best Thing to Do If Your Alarm Goes Off Alternatively, if you hear an alert, you should press the red button or turn on the alarm box. The alarm will be turned off as a result of this action. There should be a red light and a green light on the alarm box, which should be situated someplace on the unit. The green light indicates that the alarm is operational and should be left on at all times. It is shown by a red light if the alarm is getting a signal from the pump tank indicating that the water level is increasing above or decreasing below what is expected.

  • If the breaker occurs to be tripped, look around the septic tanks to see if there is any standing water.
  • It is possible that the red light on the alarm box will go out on its own after allowing the septic system to operate for a couple of pump cycles (which should take approximately 10-15 hours).
  • If the red light turns off, it signifies that the system is operating properly and that it only needs to catch up with the extra water that has overflowed into the storage tank.
  • To be clear, an alarm signal from the septic system does not always imply that sewage is about to back up into the house right away.
  • Do you require septic system repair on a regular basis or emergency service?

To arrange an appointment, please call (804) 581-0001 or send us an email through our contact page. Want to learn more about septic systems? Explore our septic system web sites by clicking on the “Septic” navigation option in the top navigation bar.

Why is My Septic Tank Alarm Going Off?

Septic tank alarm systems are a terrific method to be alerted if something is wrong with your septic tank, and they are inexpensive. When the septic alarm goes off, it means that there is a problem with the wastewater being transported to the drain field. This might be caused by a number of different factors. Most septic tanks feature an alarm that sounds when there is too much water inside of them, which might result in a backup or overflow if the problem is not addressed immediately. Once that occurrence has occurred, your float sensor will activate your alarm box, which will sound an alert depending on how high up in the tank the level has risen to be detected.

Weather issues

If it has been storming or if you have had a lot of rain in the last few days, the amount of water in your septic tank may be too much for it to handle. Standing water in the vicinity of septic systems is typically a source of problems for your septic tank. A drain field that has been saturated by rain will not enable waste water to pass through it. Overwatering your grass or draining your swimming pool in your yard might also result in a flooded area in your yard. You will need to make every effort not to use your water until the drain field is no longer inundated.

False Alarms Caused by Power Issues

Occasionally, a malfunctioning septic system alarm is caused by an electrical problem within your home or septic system. For example, your power may have flickered, resulting in a false alarm being triggered. It’s also possible that you’re experiencing electrical issues in your house, which is causing the alarm to sound.

Water Over Usage

How has your water consumption been lately? When washing double laundry, did you have a party, or did you take a long shower or bath to relax? All of this might result in more water being stored in the tank between pump cycles as a result. If it rains hard enough, the tanks may also leak, causing them to overflow and, eventually, triggering the alarm to sound.

Accidental Disconnection

The alert may ring if the pump’s power has been unintentionally unplugged by mistake. Immediately after hearing the alert go off, you should double-check that the connection is still secure and functional. Whether this is not the case, reconnect and see if the buzzer sounds again. If your septic alarm goes off again, it means that there is a problem with your pump tank someplace. Also see: How to Locate a Septic Tank.

What To Do When Your Septic Alarm Goes Off

It is important not to worry when your septic alarm sounds. The alarm signal is intended to alert you to the presence of a problem. In other words, you won’t be dealing with a sewage backlog in your house right away. However, you should still solve the problem as soon as possible because the alert is only valid for 24-48 hours on average. It indicates that either the water level is dangerously high or that the level is dangerously low. The alarm on your septic tank system should be equipped with a timer.

If, on the other hand, the system is damaged, the timer will be unable to function as intended.

It may take several pumping cycles to get the level back to normal, which is why backups may occur in some cases. If your alarm is going off, do the following:

  • Press the red button to activate the alarm system or the green button to turn it off
  • Look for the intersection of the red and green traffic lights. The green light on your alarm should always be on
  • The green light indicates that the alarm is operational. The presence of a red light indicates that your water level is likely excessive. Check the breaker for your septic tank. Inspect the area to make sure it has electricity and that there isn’t any standing water nearby. If the red light continues to illuminate after 10 hours, contact your local plumber for assistance. We at The Original Plumber are accessible 24 hours a day, seven days a week for emergency plumbing requirements in the Atlanta metro region.

When this occurs, we also urge that you reduce your water consumption. Normal operation of a sewer system is to pump waste water out onto a leach field, which is also known as effluent. If it is overburdened, it will require additional time to catch up. Too much water use will prevent the septic system from having a chance to catch up. Cut back on the amount of dishwashing you do, and try to take a brief shower instead of a long one. You might be interested in learning more about:How to determine if you have a septic tank.

Maintaining your Septic Tank

Keep your septic tank in good working order, and you will reduce the likelihood of your septic tank alarm being activated. This entails inspecting the system for obstructions. If you discover a blockage, you will want to use a chemical drain opener that is safe for septic systems or a plumbing snake. To guarantee that the blockage is properly dealt with, you will want to hire a professional out to inspect and clear your drain. Over time, clogs can cause irreversible damage to your pump tank. You’ll want to be certain that you know how old your septic tank is before proceeding.

  • If your tank is reaching the end of its 15-year lifespan, you should consider having a new septic tank installed.
  • To guarantee that you do not experience any problems with your pump tank, it is recommended that you schedule an inspection once a year with a professional who is familiar with septic tank maintenance procedures.
  • They will also inspect the alarm to ensure that it is in correct working condition and that it is receiving the necessary power supply to operate.
  • As a rule, it is advised not to ignore your septic system warning because it might be an indication of a more serious problem.
  • Call us right away to schedule an appointment so that we can solve any pump tank difficulties you may be experiencing.
See also:  How Often Does A 2600 Gallon Septic Tank Should Be Pumped? (TOP 5 Tips)

undefined

Some residences are equipped with septic systems rather than relying on the city’s public sewer system. It is your responsibility to maintain and clean your septic tank, which includes maintaining it in excellent functioning order and pumping it on a regular basis. If you own your septic tank, you are responsible for all of the cleaning and maintenance that goes along with it. In this case, a septic tank alarm system might be of great assistance to you. Unless you have an entirely new septic system put on your property, there’s a good probability that you already have a septic tank alarm placed someplace in your residence.

  • An overview of the many types of septic tank alarms Essentially, a septic tank alarm system is a gadget that monitors water elevation inside the tank and sends you notifications when the water level is much higher or lower than it should be.
  • It is recommended that all septic systems that include pumps be equipped with a timer that regulates when the pump can push waste water into the drain field.
  • Timer systems operate the pump for specific periods of time at specific times of the day.
  • When the controls cycle back and on again, the water level within the pump tank rises as a result.
  • The causes of rising water levels are as follows: There might be a variety of factors contributing to low tank water levels.
  • Repeatedly doing laundry, running the dishwasher continually, and having everyone in your home take a lot of long showers are all examples of practices that contribute to excessive water use.
  • Seepage may occur if there is an excessive amount of rain.
  • Alternatively, it is possible that anything is wrong with a septic component (pump, timer, alarm, floats).
  • Whenever your septic tank alarm is triggered, just press the red button or switch on the emergency alarm box to silence it.
  • Check to see that the septic system is operating properly and that there is no standing water around the tank before proceeding.

During this period, you should reduce your water consumption. Mike’s SepticMcKinley Sewer Services will answer any concerns you have concerning a specific septic alert in Prior Lake, Minnesota. We’re here to assist you!

Why Is My Septic Alarm Going Off?

If you are receiving an alert from your septic system, it is clear that something is not quite right. In this Knowledge Base post, we’ll go over the most prevalent reasons of a septic alert, as well as how to identify and avoid them in the future. It is recommended that you contact your local service provider to determine the source of the problem if you are unfamiliar with the operation of your system or do not feel comfortable inspecting it on your own.

ALARMS ON CONVENTIONAL SEPTIC SYSTEMS

Aeration is not present in a normal septic tank since it lacks any form of aeration equipment. If you have this sort of system and you receive an alarm, it is likely that the water level is too high. The following are the primary causes of a high water level in a traditional septic tank system:

  1. Septic tank effluent filter that is blocked with organic matter In many typical septic tank systems, an effluent filter is installed near the tank’s outflow point. Cleaning should be performed on this filter about every 6 months. if the filter becomes clogged with particles, it will slow down the flow of water out of the system, causing the water level in the septic tank to rise
  2. The submersible pump has failed or the float that regulates the submersible pump has failed Even though not all traditional septic tank systems will require a submersible pump, some may do so if they are properly designed. Occasionally, when gravity feeding the secondary treatment system is not possible, an electric submersible pump is employed. The failure of a submersible pump or a float switch will result in a high water level in the pump tank and the septic tank
  3. The outlet line will be stopped, or the leach field will be flooded. An obstruction in the outlet pipe of the septic tank or a failing leach field are the other possible causes of a high water level in the tank if it does not have a submersible pump.

An often-heard myth is that a septic tank alarm signaling a high quantity of sewage signifies that the tank has to be drained out. A high level alert will not signal when a tank requires pumping, and while emptying the tank out may temporarily resolve the warning, once the tank fills back up, the alarm is likely to re-occur due to the fact that the primary problem with the system has not been rectified.

ALARMS ON AEROBIC TREATMENT SYSTEMS

Air pumps and air compressors, as well as internal units such as a shaft aerator or a submersible aerator, are commonly used in aerobic treatment systems. External air pumps and air compressors are also used in aerobic treatment systems. The failure of the aeration device or a high amount of water in the tank are the two most common causes of alarms in aerobic systems, respectively. If your alarm or control panel does not display which alarm is now active, the methods outlined below will assist you in identifying the problem.

  1. To test if the aeration equipment is operational, check the following: If you have an air pump or compressor that is located above ground, be sure that the item is operational before proceeding. You may also check to see if the device is producing air by disconnecting the main line that connects to the aerobic tank. Alternatively, if you have an in-tank aerator, remove the cover from the aeration chamber and check to see whether the aerator is operating. If your aerator is not performing properly or is not releasing air, this is the source of your concern. Depending on the kind and condition of the aerator, it may be necessary to repair or replace the device altogether. Assuming that the aerator appears to be performing correctly, the most likely source of the warning is a high amount of water in the tank. Although this is not an emergency that must be addressed immediately, we recommend that the system be restored to operational status within 1-2 weeks of the incident. Check to check whether the water level in the aeration tank and/or the pump tank is excessively high. In a perfectly functioning system, the water level should be below the intake and at the bottom of the outflow. If the water level is high, the following are the most likely reasons why:
  • If you have a gravity-displacement system, a blockage in the outlet line would be the source of your excessive water level. The chlorine feeder is the most typical source of contamination. Remove the tube that contains the chlorine tablets and clean the feeder of any material that has accumulated. Also, if the system has surface discharges, make certain that the discharge exit is free of weeds and other debris. High water levels in a system with a submersible pump are usually caused by either the failure of the submersible pump or the failure of the float switch, which controls when the pump is turned on and off. The most effective method of testing a float switch is to use an ohm meter to check for continuity. The switch should be tested closed in the elevated position and open in the lowered position to ensure that it is functioning properly. By detaching the submersible pump from the float switch and running it directly from a known functional power supply, the pump may be checked. Remember that the pump will not automatically shut off when you do this, and you will need to separate it from power in order to turn it off before the tank is completely emptied.

THIS DID NOT RESOLVE MY ISSUES

If none of the troubleshooting steps listed above appear to resolve the issue you are experiencing, it is possible that there are difficulties with your control panel or alarm system that are causing the system to malfunction or causing you to get a high level alarm. In this case, we recommend that you contact a professional service provider to inspect the system and address the problem for you.

Why Does My Septic Alarm Keep Going Off?

If you’ve ever had your septic alarm go off, you know that it can create a lot of anxiety and uncertainty. However, if that’s the situation right now, don’t be concerned since it doesn’t necessarily signify that you need to take urgent action. In the case that your septic system sounds an alert, you should strive to maintain your composure. The fact that your previous alarm went off has passed and there are no apparent symptoms that something is wrong with any plumbing in or around the house suggests that this is not a life-threatening situation may indicate that nothing has to be done immediately.

If the alarm has just sounded once, this might be the case. However, if the alarm continues to sound, it is a very good indication that something is amiss and that it is time to bring in a professional plumber.

How Your Septic System Works

The importance of understanding how your septic system works, as well as what you can do to avoid the need for costly repairs, cannot be overstated. When it comes to a conventional home septic system, there are four main components to consider:

  • Soil absorption, leach fields, drainfield trenches, and drainage pipelines are all important considerations.

Your septic tank is located underground on your property, somewhere in the back yard. It’s not usually too far away from your home, and it’s usually surrounded by a drainfield, which makes it easier to manage any runoff that occurs after heavy rainfall or snowfall during colder seasons, due to the amount of water that can come into contact with the ground during these types of circumstances. The water from your home (all of the water) drains into your septic tank through a single main drainage line.

Most of the material that accumulates in the sludge and muck on the bottom is settling down as a result of gravity pulling it downward, a process known as sedimentation.

The water that remains in the tank is pre-treated before being discharged through a conduit into the environment.

Why Is There An Alarm On The Septic System?

It is the intent of installing an alarm on your septic system in order to notify you if something begins to go wrong or break down in your septic system. In order to keep you on top of any possible problems before they become catastrophes, the alarm is programmed to sound. As soon as you become aware of a potential problem with your septic system, it is critical that you take action to rectify the situation immediately. The failure to handle this issue for a lengthy period of time might result in serious complications down the line – so don’t delay!

What Does The Septic Alarm Mean?

It’s important to understand that when your septic tank alarm goes off, it implies that either there is an issue with the water level or there is a problem with the pump in the septic tank that has to be addressed. For those who have electrically assisted pumping systems for their tanks, you’ll need to address any issues as soon as they arise because if you don’t, bacteria and other unwanted particles will build up at the top of your sludge line and eventually flow into a nearby stream if the problem is not addressed immediately.

  1. Here are a few examples.
  2. Roots of trees and plants are drawn to sewer pipes because their roots can detect the presence of fresh water in the surrounding region.
  3. 3.
  4. Cold weather is frequently responsible for septic tank leaks, which occur when a cement holding tank splits or when plastic components begin to develop holes.
  5. 4.Drain Cleaners- Among all of the chemical home cleaners that many of us use, drain cleaners can be the most corrosive, not just to your plumbing but also to your septic system, according to the Environmental Protection Agency.
  6. This component is included in almost all detergents, and if not utilized properly, it can cause damage to your water supply.
  7. It is also possible to ruin your septic tank by using too much detergent in your wash since less expensive laundry soaps include fillers, which are more prone to clump together and produce blockages in your septic system.

6) Excessive use of the dishwasher and washing machine, along with an abundance of daily showers and bathtubs, results in an excessive amount of water being consumed in your household. This can result in a significant amount of water being added to your septic tank.

Other Reasons Your Septic Alarm Is Going Off

Aside from the fact that your alarm may be ringing to notify you to a problem with your septic system, there may be other reasons why your alarm is sounding as well.

  • There is a problem with the alarm
  • There is an issue with the pump timer. A circuit panel breaker that has tripped
  • A problem with the septic tank pump that is electrical and/or mechanical in nature
  • An obstructed outflow line
  • There is an issue with the float switch.

The presence of a septic tank necessitates the exercise of caution as well as the maintenance of the tank. You’ll need to make sure your system is checked for signs of trouble on a regular basis, and you’ll need to adhere strictly to the maintenance schedule to avoid problems later on; however, as long as you keep up with inspections and work that needs to be done by following this advice, the chances are good that your tank will last for many years! 770-443-8229 If you have any questions regarding your septic system or are experiencing difficulties with it, give Atlantis Plumbing a call as soon as possible.

See also:  What Enzyme Is Used To Destroy Septic Tank Waste? (Best solution)

Why Your Septic Tank Alarm Is Going Off and What to Do About It

VIEW ALL OF THE POSTS Date of publication: July 28, 2021 Septic tanks are occasionally equipped with an alarm system that will alert you if there is a problem with the septic system. When the water level is dangerously high and might result in an overflow or backup, it will sound an alarm. As a result of the warning, you now have the opportunity to take action and handle the problem before it becomes terrible. As a homeowner, it is in your best interest to ensure that your septic system is in good working order since even a minor failure may create a great deal of stress and inconvenience in your house.

How Septic Alarms Work

The septic system in your home collects all of the waste generated by your domestic plumbing, and the septic alarm is connected to this system. The septic tank is equipped with an interior baffle that divides the waste into three layers: solid, liquid, and sludge. Solid waste is separated from liquid waste by the baffle. In contrast, liquid waste is expelled through pipes in the soil and dissipates, while solid waste remains in the tank. Microbes that are naturally present in the tank begin to degrade the sludge by consuming it, and the process continues.

Therefore, when the septic tank overflows, an alert will sound on the system.

What It Means When the Septic Alarm Is Going Off

Most of the time, when your septic alarm goes off, it implies that the water level in your tank has risen too high. High water level alarms are primarily used to notify that a large amount of water is being drained into the system or that groundwater is seeping through the tank’s walls.

How to Turn Off Septic Alarm

Do you have a sewage alarm that is always going off or that has been going on and off? Are you attempting to identify the source of the problem? The very first thing you should learn is how to turn off your alarm clock properly.

Consider the following scenario: you have a control panel, with the mute button typically located on the front of the panel. If you have a freestanding alarm, there should be some form of installed switch that allows you to turn off the horn when the alarm goes off.

What to Do When Your Septic Alarm Goes Off

Now that the septic alarm has been muted, you must identify what caused the alert to sound in the first place. First and foremost, you should turn off any water faucets in your home and garage. This keeps the liquid level from rising to the point where the experts working on your septic system are unable to access into the tank to diagnose the problem and fix it. If your tank is completely full, you’ll have to have it pumped out. As a result, if you cease using water immediately, you will save the expense of having your tank pumped.

You will have perfect piece of mind if you entrust the task to a reputable business with years of expertise.

Look no farther than Allto Construction; they are the company you need.

You can count on us to restore proper operation to your septic system.

When to Call Your Septic Company for Emergency Services

In the midst of a routine day, when everything is running smoothly and you’re spending quality time with your loved ones, the last thing you want is to experience an issue with your septic system. Fortunately, there are early warning indications that things are about to go bad. Following are few indicators that you should take immediate action.

  • Gushing pipes: If you flush the toilet and hear gurgling coming from the pipes, it might signal that the septic tank is full, needs to be pumped, or has other issues. Problems with the toilet flushing: When the toilet won’t flush and a plunger doesn’t solve the problem, the septic system should be the first thing you inspect. Drains that take a long time to drain: Any sink or bathtub that appears to be draining slowly might indicate that your septic system is overflowing with waste. It’s past due for a physical examination
  • Noxious odors: If you notice a foul odor emanating from your house on a regular basis, it’s possible that raw sewage is leaking from your septic tank. Ground that is squishy: You should contact your local sewage treatment facility if you find puddles or areas of standing water in your yard near the drain field
  • This might indicate that something is wrong with your septic system. Back-up of water: Sinks, showers, and dishwashers overflowing with water are some of the most obvious signs that you have a septic problem.

It would be beneficial if you thought about calling an aseptic pumping and cleaning services firm before any of these problems deteriorate further. Allto Construction is the most qualified company to handle all of your septic tank requirements. We are a family-owned company that has been in the sewage sector for more than 50 years. During this time period, we have amassed a substantial amount of information, expertise, and abilities in all areas pertaining to septic systems. Our professionals are certified and licensed to handle any septic problem, no matter how large or minor it may be.

  • Don’t be concerned if you have an emergency in the middle of the night.
  • Our personnel are available 24 hours a day, seven days a week to attend to any issue that may arise.
  • This means you can relax knowing that your septic system is in capable hands.
  • Please don’t hesitate to contact us through phone or e-mail.

What do I do when my septic alarm goes off?

Posted on 04/37/2009 at 04:37 0 Comments on hinBlog When the water level in the pump tank rises beyond what is considered normal or falls below what is considered normal, an alarm system will sound. It is recommended that all septic systems with pumps be equipped with some type of timer. The timer regulates the amount of time that the pump is permitted to pump waste water into the drain field. During periods of increasing water consumption, this protects the drain field from becoming overloaded with water.

  1. Systems that use timers allow the pump to run for a predetermined period of time at particular times of the day.
  2. The water level within the pump tank will rise until the pump is able to be turned back on.
  3. This is something that can happen from A-C.
  4. An excessive amount of water is being pumped through the septic system.
  5. It appears that groundwater is entering the system.
  6. If there is an excessive amount of standing water surrounding the septic tanks, the water may seep into the tanks, causing the water level within the tanks to rise.
  7. It’s possible that one of the components of the septic system is malfunctioning.

When the alarm goes off, pressing the red button or turning on the alarm box is the recommended course of action.

Both a red and green light will be put on the alarm box for easy identification.

The presence of a green light indicates that the alarm is operational.

After that, check the septic breaker to ensure that the septic system is receiving electricity.

If the breaker is off, turn it back on.

During this period, try to use as little water as possible to save money.

Simply put, it needed to catch up with the excess water that had been pumped into the system.

An alarm signal does not necessarily indicate that sewage is ready to overflow into the residence.

If the warning is sounding, restrict your water use to the bare minimum.

If something goes wrong, the slowed water flow will give you plenty of time to fix it before sewage backs up into the home and floods the house.

Call Us Right Now! Vac-Tec SepticWater LLC.11603 Canyon RD. EPuyallup, WA 98373PH:(253) 268-0322WS:vactecseptic.com Vac-Tec SepticWater LLC.11603 Canyon RD. EPuyallup, WA 98373 Links: Call us at (253) 268-0322 or stop by our location at to talk with an expert about your system.

5 Reasons Your Septic Alarm May Be Going Off

Your septic alarm might be set inside your home, but it’s more common for it to be positioned outdoors, near the septic tank. When there is a problem, the alarm will emit a loud siren and a light will illuminate on the control panel. The question is, what are the concerns that might set off the alarm? In this section, we’ll go through the top five typical reasons that your septic alarm could go off. The most typical cause is a high amount of water in the tank, which causes the alarm to sound when the water level exceeds a certain point.

  1. Heavy rains might potentially cause your septic system to overflow.
  2. If this is the case, you should refrain from using water until the levels have decreased.
  3. This might be due to a neighborhood-wide power loss, or it could be because the pump has triggered a circuit breaker.
  4. It is possible for the breaker to trip if moisture has penetrated it.
  5. In the same way, the pump float might be defective.
  6. If the pump float fails to function, the septic pump will be unable to determine when it needs to turn on, resulting in an increase in the amount of water in the tank.
  7. Many septic systems rely on a timer to determine when the pump should be activated.

If the timer does not function properly, the tank may become overflowing.

This might be triggered by a variety of circumstances.

Another recommendation is to avoid using water until the levels in your septic system begin to decrease.

They are designed to provide you with 24-48 hours of usage time before the sewage begins to back up into the system.

At this point, it’s time to call in a professional septic service company for servicing.

Septic Alarm Going Off? – Troubleshooting Delaware

WilleyCo installs alarm systems on a bit more than half of the residential septic systems in Delaware that are sold to homeowners. They may be put anywhere in the home, however they are most commonly seen outside near the septic tanks. When there is a problem, these alarm systems will emit a loud siren sound and illuminate a light to alert you. When the alarm goes off, what do you do with your time? To respond with an alarm occurrence effectively, you must first understand what the alert represents.

Alarm systems are equipped with float sensors, which are located within the pump tank. When the water level rises to the level of the float, the alarm box will sound an alarm event to alert the user of the situation.

What could cause the water level in the pump tank to rise to the level of the alarm float?

  1. When anything isn’t operating properly with the sewage pump, your inside alarm will alert you. The alarm float has failed, and there is no electric current coming to the pump to replace it. It’s possible that a breaker has tripped. Examine your circuit breakers. Breakers can fail for a variety of reasons. If the pump isn’t on its own isolated breaker and another device attempted to consume electricity on the same circuit at the same time as the pump attempted to turn on, the pump may trip. Because to moisture intrusion, certain circuit breakers may trip. Have you dug anything up in the yard? It’s possible that you stepped on the wire, causing it to trip. In certain circumstances, a faulty wire may be the source of the tripped breaker
  2. The pump also includes a float that determines when it may be turned on while waiting for the timer to be approved (see number 4). It’s possible that the float has gone bad. The lifetime of these floats is between 4 and 8 years. If the float has failed, the pump will not be aware that it needs to turn on
  3. If the timer has failed or has been out of tune, the pump will not turn on. Many septic systems are equipped with a timer that signals to the pump float and pump when the system is permitted to use electricity. Timers are implemented to prevent the drainfield from being overused during high demand periods
  4. Overuse of water is prevented by installing timers. This can occur in a variety of ways. Did you have a party, have guests over, or take a lengthy bath or shower while washing two loads of laundry at the same time? All of these factors might contribute to the accumulation of excess water in the pump tank between pump cycles. Take a look around the corner by the septic tanks. What if there is standing water over or around the tanks? It’s possible that surface and/or rainwater is entering into the pump tank’s reservoir. When the alarm is set off every time it rains, it becomes evident that something is wrong. When it comes to the worst-case situation, it is possible that the drainfield is experiencing difficulties absorbing water. This might occur for a variety of reasons. This might be caused by a damaged pipe, a broken fitting, or because the drainfield has been saturated with water and is unable to handle any more

What do you do?

  1. Wait approximately 24 hours from the time the alarm began to sound and drastically cut your water consumption. This will give the system time to catch up if it is experiencing an increase in water use due to increased demand. Examine the septic breakers, particularly the one for the pump, for damage. If it has been tripped, it should be turned back on. You will need to speak with a septic contractor to determine why the breaker tripped in the first place
  2. If it has just rained or is currently raining, look for standing water around the septic tanks. Are there any gutters that are pointing towards septic tanks? Is there any standing water near the tanks? If this is the case, take steps to correct the situation since it will shorten the lifespan of your septic system. If the alarm continues to sound after steps 1, 2, and 3 have been completed, call a septic contractor for assistance. Make sure to contact the installer if your equipment is still under warranty.
See also:  What Citrus To Plant Above A Septic Tank?

What to Do When Your Septic Alarm Goes Off (With Troubleshooting Tips)

Septic systems with pumps are often equipped with some sort of warning mechanism to notify the homeowner if something is amiss. The alarm will sound if the water level in the pump tank becomes too high, or in rare cases, dangerously low. The majority of alarms will have a red light and a beeping sound. If the alarm sound is set to “quiet,” just the red light will be illuminated. When the septic alarm goes out, you should immediately turn it off. Then check to determine if the pump is receiving power from the electrical system.

  • The pump will complete a few of cycles and may be able to remove some of the extra water.
  • As a homeowner, you should be familiar with the operation of your septic system in order to identify and comprehend fundamental problems.
  • You’re probably thinking something along the lines of mine: Don’t I already have enough on my plate trying to figure out why my smoke detector is blaring or chirping intermittently?
  • We had just moved into our new home in Lewes.
  • So I went on the internet, chatted to a few neighbors, and ultimately obtained the services of a specialist, and the following is what I discovered.

What is a Septic Tank Alarm, and How It Works?

There is just one major function of a septic tank alarm: to notify you that the water level within the pump tank has risen to an unsafe level. Water will be removed from your tank every several hours, depending on the size of your tank, the amount of water you use, and a few other technical considerations. Modern septic systems include a timer built into the control box that determines when and for how long water should be evacuated from the system. Pumps are often configured to cycle twice or more times per day, which should be adequate to meet the needs of the majority of households.

  1. Pumping an excessive amount of water into the drain field might result in harm.
  2. The water level will rise if there is more water than normal in the reservoir.
  3. When the water level becomes dangerously high, an alarm will sound to alert you.
  4. In the event that everything is functioning properly, you may be confident that the alarm will sound to alert you of a potential problem.

Most of the time, the alarm will sound if the water level is too high, but it may also sound if the water level is too low. If the pump does not have any water to push out, it has the ability to do harm to it.

Get to Know Your Septic System

It is not all septic systems that are created equal. Learn about yours, even if you’ve never had an issue with it. I didn’t have that luxury because the alarm went off just as we were getting settled in. LOL! Find the location of the alarm box. Some alarms have buttons to turn them off, while others have switches to turn them off. Open it up to see the bits that are visible. When you understand how something is supposed to look, you will be able to detect when something is not quite right. On the box, there are two lights: one that is green and one that is red.

The presence of a red light and a sound indicates that the alarm has been activated because it has received a signal indicating that the water level in the septic tank has reached a predetermined level.

=The following are ten things you should be aware of regarding your septic system.

Two Main Things toDo When the Alarm Goes Off?

First and foremost, there is no need to panic. Today’s septic systems are constructed in such a manner that you have ample time to cut water use and detect any issues prior to the system overflowing completely. The warning indicates that the water level has been raised, not that it would explode in a few seconds as some people believe. When the septic alarm goes off, do the following procedures immediately:

  1. Locate the control panel on your computer. To turn off the alarm, press the button or flip the switch (if there is a sound). As you can see in the photo above, I didn’t have any sound because my phone was set to mute. Reduce your water use to a bare minimum until the problem has been fixed. Put your washing machine, dishwasher, and other water-using appliances on hold for the time being. And, if necessary, take a shower, but keep it brief

Why is My Water Level Elevated?

The majority of the time, your septic system alarm will sound because the level of water in your tank is more than it should be, according to the manufacturer. Let’s take a look at the most typical reasons behind this.

Power Problem

Electricity is used to run the pumps. Your pump will not be able to extract water from the tank if there is a power outage or any other power problem. In order to determine whether or not there is electricity to your sewage system, check the primary circuit breaker for your septic system. Check the pump circuit breaker in your control box if you have one; otherwise, proceed to step 3. That is also subject to error. This was, in fact, the source of my frustration. The system was never turned on for the first two weeks we were in our home, which was apparently due to a faulty installation by the electrician who installed it.

Also, make sure the outlets where the pump is connected in are working properly.

The problem is with the pump if the electricity is working, but the pump itself is not functioning properly.

Increased Water Usage

You have a set capacity for your septic system, and the pump is configured to push water out in accordance with that capacity. If you are using a significant amount of water in comparison to normal, the level may climb. Performing an excessive amount of laundry, taking repeated showers if you have guests, or even cleaning a large number of dishes might raise the water level. The same may be said about excessive cleaning that necessitates the use of a lot of water.

You are familiar with the amount of water you typically consume, and you can readily identify this as a possible cause for the alert to sound. Fortunately, if you return to regular usage, this issue should be resolved automatically.

Heavy Rain or Floods

It is possible that bad weather is the blame for your tank being full. Heavy rains or floods will cause the earth surrounding the tank to become saturated. The presence of standing water surrounding the tank, particularly if there are any cracks in the tank, increases the likelihood of water getting into it. Rainfall that is very heavy can also flood the earth around the drain field, preventing water from draining out of your septic system properly. You should restrict your water use to a bare minimum in this situation and wait until the soil dries out and the pump eliminates the extra water in the subsequent cycles before taking action.

Clogged Effluent Filter

Cleaning the effluent filter on a regular basis, generally twice a year, is recommended. Essentially, the filter serves as a screening barrier to reduce the volume of solid material that is discharged from a tank into a drain field, which in my instance is an underground system. On the tank’s discharge port is a filter that collects any debris. Solid waste might block the filter and cause the water to flow more slowly. The extra water will remain in the tank for a longer period of time than it should, and additional water will be added, raising the level.

Reduce water use and wait for a few pump cycles to check whether the problem has been resolved.

Pump or Float Failure

Some septic systems, such as mine, are fitted with submersible pumps that, in addition to the timer, are controlled by floats that control the pump. After reaching a certain height, the float will record the change and activate a pump to remove the water. The float is used to temporarily override the timer until the effluent in the tank returns to its regular level. If the float is not functioning properly, it will be unable to control the pump, resulting in the water level rising. The same may be said for a malfunctioning pump.

The pump must be maintained on a regular basis in order for the system to operate efficiently.

  1. Find the control panel and turn it on. Change the mode of the switch to manual
  2. If the pump is turned on and the water level lowers, the float is the source of the problem. This indicates that the pump is not starting properly
  3. The fault is most likely the pump itself.

My view is that pump or float difficulties are not simple DIY fixes, and I would recommend consulting a professional.

What About the Blower Alarm

If you have a blower system, you may also have to deal with an additional alert to worry about. Aerobic septic tanks, such as mine, rely on a blower mechanism to pump air into the treatment tank throughout the treatment process. By maintaining microorganisms that digest waste, this system assures the creation of oxygen necessary for the system’s operation.

Solids would not become liquids if this mechanism were not in place. If your blower alarm is going off, it’s possible that your blower is not working. I would contact a knowledgeable specialist to assist me in troubleshooting the situation.

Closing Thoughts

It’s crucial to note that some of these issues might be ongoing in nature. Consider upgrading your septic system, replacing any damaged components, or having them repaired if you discover that they are occurring too frequently. In any case, discussion with a specialist is required. These common issues frequently arise when there is a significant shift in the amount of water being consumed. Some new residents have just moved in, for example. Everyone now takes advantage of the shower, laundry, and dishwasher.

There is one thing that must be avoided at all costs: turning a blind eye to the situation.

It has the potential to cause the drain field to overflow.

All of these problems will cost a lot and will be more harder to solve than any of the smaller problems which contribute to rising sea level now.

Update: My Septic Alarm is Going Off Again

The alarm went off again one week after the septic system professional arrived to troubleshoot our situation. For starters, it was because the pump breaker was set to “off” that the problem occurred. The technician suspected that the electrician who had installed it may have forgotten to turn it back on once he had finished. He manually pumped the system and believed that this had resolved the issue. The alarm has sounded once more, but this time the pump breaker has been activated. I also tested the primary circuit breaker, which was found to be operational.

It should most likely be a problem with the pump or float, which is strange considering that this is a brand new system.

When the situation is resolved, I will make an update to this post.

  • Elevated water
  • A control box indicating that the pump breaker has been activated

Technician Came to Troubleshoot the Problem

He arrived and determined that there is nothing wrong with the septic tank system. According to him, we may have a leak somewhere in the home, most likely in one of the toilets. He physically pumped it till the water level had dropped to a safe level. I’m afraid I’ll have to disagree with him on this point. I checked all three of our toilets and found no signs of a leak at all. This septic system was intended to handle eight people, and there are presently just two individuals that live in the house.

In my opinion, the alert should not be turned off even if there is a minor leak.

I spoke with the builder, and he said he would call with the company’s management to get a sense of how things are going. I’ll add any new information to this page when it becomes available. Please let me know in the comments what you believe to be the source of the problem.

Update: A Manager Asked the Technician to Come Again

Following my conversation with the builder, the technician was requested to return to confirm that everything was functioning properly. In my previous statement, I said that there was no leak anyplace in the house. As a result, the problem had to be something else, and if we don’t repair it, it may happen again. He came to the conclusion that there could be a problem with the amount of wastewater that is discharged with each pumping cycle. Consequently, he raised that quantity a bit by changing the effluent control valve, which is represented in the illustration below.

Despite the fact that we recently used much more water due to the visit of my son and his girlfriend, I have not experienced any problems since then.

Posts related to this one:

  • Can my toilet cleaner cause damage to my septic system
  • Can these common household items cause damage to my septic system
  • Why Do I Need a Mound Septic System?

Leave a Comment

Your email address will not be published. Required fields are marked *