What Ate The Dementions Of A 1970 Concrete Septic Tank? (Perfect answer)

  • Height: The standard size ranges from 1500mm to 1800mm and 1875mm with the base cast in. Wall Thickness: The standard wall thickness ranges from 75mm to 90mm. Weight: The concrete septic tank can weigh around 1.1 to 3.6 tons, depending on the size.

How big are old concrete septic tanks?

Overview: A 1250 tank is a common choice for mid-size homes with 3-4 bedrooms. Size and Weight: All concrete tank sizes vary. Some of the most popular 1250 gallon concrete precast tanks are around 5′ 9” x 8′ 6” x 5′ 8”.

What are the dimensions of a 750 gallon concrete septic tank?

750 Gallon Septic Tank – Single Compartment. 60”D x 51”H x 92”L.

What are the dimensions of a 500 gallon concrete septic tank?

500 Gallon Siphon Tank Package Overall Length: 79” Overall Width: 48” Height to center line of inlet: 48” Height to center line of outlet: 48”

How often does a 1000 gallon septic tank need to be pumped?

For example, a 1,000 gallon septic tank, which is used by two people, should be pumped every 5.9 years. If there are eight people using a 1,000-gallon septic tank, it should be pumped every year.

How do I calculate the size of my septic drain field?

Drainfield Size

  1. The size of the drainfield is based on the number of bedrooms and soil characteristics, and is given as square feet.
  2. For example, the minimum required for a three bedroom house with a mid range percolation rate of 25 minutes per inch is 750 square feet.

Can you have a septic tank without a leach field?

The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.

How often should a 1500 gallon septic tank?

The size of the tank is one determining element regarding how often it ought to be pumped. For a household of 4 with a 1,000-gallon tank, it’s advised that it be pumped every 2.6 years, but for a 1,500-gallon tank, the time can be extended to 4.2 years and up to 5 years for a 2,000-gallon tank.

How big were old septic tanks?

A single compartment 750, 1,000, or 1,200-gallon tank was still the norm, with the size of the tank varying based on the size of the home. In the 1970s, the standards of practice were once again raised, and two-compartment tanks with capacities of 1,000 and 1,200 gallons became the industry norm. Septic tanks are typically 4.5 feet wide by 8.0 feet long by 6 feet tall. They are also available in other sizes. Local site characteristics, form, slope, and other variables influence how deep tanks are sunk.

Here is the fundamental arithmetic for calculating the capacity (volume) of a septic tank in gallons.

The majority of older homes are connected to a normal septic system, while some may still have a cesspool or even a privy on the premises.

In addition, how can I calculate the size of my septic tank system?

The majority of home septic tanks are between 750 and 1,250 gallons in capacity.

What happens to a septic tank that is not in use?

An underused septic tank that was once in operation but has been idle for a year or even longer should still be almost filled to the point immediately below the outflow pipe’s opening.

Tank Types Express Septic Service

Septic tanks should be cleaned every 3 to 5 years, depending on the size of the household and how much water is used. When the septic tank is pump out on a regular basis, it will help to reduce the buildup of scum and sludge layers in the tank. Ideally, the scum layer should not be more than 24 inches thick. If the material is deeper than 24 inches, it will flow down the outflow pipe and into the drainfield, plugging up the drainfield and resulting in drainfield failure. In order to get your septic tank cleaned, you must first locate the main compartment2nd compartment lid of the septic tank and remove it.

The position of a septic tank lid and the number of lids on a tank varies depending on the year it was placed and the manufacturer.

If you prefer not to find and excavate the Septic Tank lids yourself, or if you are unsure of where the lids are placed, Express Septic Service may assist you with this task.

We may request an as-built drawing from the County Health Department on your behalf if one is available (NO CHARGE). When looking at an as-built, keep in mind that it will only show the overall placement of the sewage system components, not the actual location of the septic tanks.

Septic Diagrams:

1000 Gallon Septic Tanks: This tank design, which was in use from around 1976 to present, will have one main lid and two smaller baffle covers on either end of the tank, as seen in the diagram below.

Two Compartment

From late 1976 until the present, a septic tank layout of 1125-1200 gallons was erected. It is possible for this tank to have two main 24′′ lids or two main lids and two little baffle lids at both ends of the tank right above the inlet and output baffles, depending on the manufacturer. If there are risers to the surface of the tank, you will be searching for two lids that look like this. If the tank is not risered, you will discover concrete lids with a diameter of 2-24″, as seen in the figure below.

Holding Tank

As an alternative to the traditional on-site sewage system, it is a good option. A holding tank is not the same thing as a septic tank. A holding tank is used to retain household waste and prevents any of its contents from leaking into a drainfield, whereas a septic tank is used to enable waste water to flow into a drain field. Concrete, fiberglass, and polyethylene can all be used to construct holding tanks. Depending on the location, holding tanks can be constructed above or below ground. Holding tanks must be pumped on a regular basis, depending on the amount of water and waste water used, as well as the size of the tank.

In the event that a holding tank is not properly pumped, waste water will back up into the home or spill onto the ground.

Pump Tank

Some homes may be equipped with a pump tank or a pump basin in addition to a septic tank. Typically, pump tanks are located underground near the septic tank; however, depending on the year the system was established, risers to the surface may be present, allowing for simple access to examine and repair the effluent pump for maintenance or if the pump has stopped operating. Before the effluent is pumped to the drainfield region, it is collected in a pump tank or basin from a septic tank or ATU (Alternative Treatment Unit).

It is necessary to configure the control floats such that a certain volume of effluent is discharged to the drainfield.

The pump then works to bring the level of wastewater back down until it reaches that of the off float setting.

When the alarm goes off, there is enough reserve storage in the pump tank to allow the homeowner to consume only a little amount of water until the problem with the system can be resolved and the alert turned off.

Aerobic Treatment Unit (ATU)

In some cases, an alternate treatment system may be used in place of a typical septic tank and gravel trenched drainfield, such as in cases of poor soil drainage, small lot size, or environmental concerns. The majority of alternative treatment systems are comprised of a multi compartmented tank known as an Aerobic Treatment Unit, or ATU for short. The majority of ATUs are divided into three compartments: a “waste” compartment, an aeration chamber, and a clarifying chamber. The trash compartment contains solids used in the pretreatment and liquification of garbage, as well as non-waste incidental products that are flushed down the toilet and into the drain.

  • Clearing the effluent further improves its clarity since the leftover particles are allowed to settle in the clarifying chamber.
  • These components are intended to kill bacteria and pathogens before the effluent is discharged into the drainfield.
  • All of these models have undergone extensive testing before being certified.
  • These can range from gravity to pressure distribution to Glendon mounds to sand filters to drip irrigation.
  • For any routine operation and maintenance inspections or services, a Health Department Certified Operation and Maintenance Specialist will be required, and some manufacturers may require you to be certified by their firm in order to conduct these services.
  • As previously said, it is important to have these sorts of systems monitored on a regular basis and fixed as needed in order to maintain correct performance and to keep your system free of problems.

Restaurant Grease Trap

Almost every food service facility that serves food and washes dishes, including restaurants, cafés, coffee shops, delicatessens and bakeries (among others), will have an interior grease trap located near the sinks to collect grease from the sinks. They are available in sizes ranging from 20 to 50 gallons. Fatty acids, oils, and grease (FOG) are prevented from entering your drain pipe by a grease trap, which is a chambered compartment.

Grease flows into the trap, enabling the grease to solidify and float to the top of the trap while weighted solids fall to the bottom of the trap, allowing the liquid to flow out via the drain pipes and into the septic tank or into the city sewage.

Grease Tank Interceptor Service

A grease interceptor is a huge tank that may be situated outside of the structure on the ground level. They can range in size from a few hundred gallons to several thousand gallons. You will need two tanks if you have an exterior tank. The first tank will be a grease trap (tank), which will hold grease until it is removed. The garbage from the restrooms will be disposed of in a tank that is specifically dedicated for this purpose; if the facility is on sewer, the waste will be disposed of in the city sewage.

In addition to a simple cleaning rooter service utilizing an electric snake, we also provide hydro-jetting, which uses high pressure water to break away hardened grease and keep the drain from backing up.

How to Find the Lid on a Septic System

All septic tanks eventually fill with sediments and must be pumped out on a regular basis in order to remain in excellent functioning order. If the tank’s lid is not on a riser at ground level and you are not the home’s original owner, you may be unable to determine where the lid is located. A typical septic tank is 4 inches to 4 feet underground, with all of its components, including the cover, buried between 4 inches and 4 feet underneath. This is true regardless of whether the septic tank is equipped with special risers that keep the lid flush with the surface of the ground.

Consult A Map

First, choose with the most straightforward choice. The installation of septic tanks at all locations is recorded in most counties’ permission records, which are kept on file for future reference. Typically, this will include a schematic indicating the placement of the tank on the land, as well as certain dimensions that will allow you to measure to the precise site of the tank. If your tank was placed before your county made it a requirement to record the location of such tanks, you may find yourself with nothing to show for your efforts.

See also:  Which End Best To Pump Septic Tank? (Best solution)

Search For A Sign

Septic tanks are placed in such a way that they are as unnoticeable as possible on the land. After the grass has grown back after installation and some time has passed, it is possible that just a few visual indications will remain. Pay particular attention to the contours of your yard for any inexplicable high or low points that might suggest the presence of an underground storage tank.

Follow The Pipe

Installation of the septic tank takes place along the sewage line that runs from the house into the front yard. Locate the 4-inch sewage pipe at the point where it exits the home in the basement or crawl space, if it is there. Locate the same spot outside and make a note of it. Insert a thin metal probe into the earth, identify the 4-inch sewage line, and follow it across the yard, probing every 2 feet, until you reach the end of the property.

Septic tanks are required to be at least 5 feet apart from the home in all states except Alaska. The majority of them are between 10 and 25 feet distant. Whenever the probe makes contact with flat concrete, fiberglass, or polyethylene it indicates that the tank has been located.

Locate The Lid

The majority of septic tanks are rectangular in shape and measure around 5 feet by 8 feet. Investigate the tank’s circumference to determine its boundaries and outline the rectangle’s boundary using a pencil. A septic tank that was built before 1975 will have a single concrete lid that is 24 inches in diameter in the center of the rectangle. If the tank was built after 1975, it will have two covers made of fiberglass or polyethylene, centered at the ends of the rectangle and centered at the ends of the rectangle.

Call A Professional

The majority of septic tanks are rectangular in shape and measure around 5 feet by 8 feet in dimensions. Examine the tank’s circumference to determine its edges and draw a rectangle around them. In the center of the rectangle will be a single concrete lid measuring 24 inches in diameter, which was erected before to 1975. If the tank was built after 1975, it will have two caps made of fiberglass or polyethylene, positioned at the ends of the rectangle and centered in the middle of each compartment.

Mark The Spot

Make a note on the ground near where the tank was pumped by a professional and the lid was buried to serve as a reference in the future. In order to keep track of where you are, you should choose a hefty circular patio tile that is embedded in the ground. Additionally, draw your own map of the area and store it with your other important papers.

Septic Tank Replacement

The location of the tank should be marked for future reference once it has been emptied by a professional and the lid has been hidden. In order to keep track of where you are, you might use a hefty circular patio tile that is placed in the ground. Also, draw your own map of the area and save it with your other important papers.

The Septic Tank
  • An underground, watertight container, often composed of concrete, fiberglass, or polyethylene, serves as a waste disposal system. The major function of the tank is to separate solid waste from liquid waste by separating the solids and greases from the liquid waste. Its function is to retain wastewater for a long enough period of time to allow heavy particles to sink to the bottom and form sludge, while oil and grease float to the surface and produce scum. Septic tanks include anaerobic bacteria (bacteria that do not require oxygen to function), which break down the solids and greases. Some sediments are left at the bottom of the septic tank that have not been digested (sludge). Solids must be removed from the tank on a regular basis in order for it to function properly. It is via this pumping that sediments are prevented from being taken intothedrainfield and the effective capacity of the tank is maintained. Grease, sludge, and hair float to the surface of the water. A standard septic tank has a capacity of 1,000 gallons of liquid, is waterproof, and is typically constructed of concrete, however it can also be constructed of fiberglass and plastic. Inlet and outflow flow patterns are controlled by internal baffles located at the tank’s inlet and exit
  • Historically, single compartment tanks were the norm for systems built before 1980ish. Tanks erected after 1980 are often divided into two compartments. Because both compartments of a two-compartment tank must be pumped when the tank is being pumped, it is critical to understand this before having the tank pumped.

Septic systems are available in a variety of configurations, including gravity, chamber, pressure distribution, and others. Septic systems differ in the manner in which effluent is transported from the tank to the absorption field, which is often a matter of design. The septic tank itself is the most frequent component of all of the many types of systems on the market.

How often does a septic tank need to be replaced?

In most cases, septic tanks will not need to be changed after a specific number of years. Homeowners should not wait until they are experiencing issues before considering tank replacement. When it comes to your system, regular maintenance is essential. The majority of older septic systems that have been properly maintained are still in good working order today. Septic systems are inspected by a professional septic inspector to determine their condition. He can tell you what sort of soil absorption system you have based on the information you provide.

It is necessary to drain the tank if there is indication of bacterial issues, such as very thick scum or solids accumulation inside the tank.

If your septic system is not properly maintained, it may fail, necessitating excavation and repair or replacement.

If your septic system is properly planned, implemented, and maintained, it should survive for a very long period of time. Systems that are not maintained will fail. PROTECT. DON’T NEGLECT TO DO SO!

Septic System Life expectancy

System and component life expectancy are discussed in detail in the next section. How long does a septic tank last before it has to be replaced? A septic leach field or drainfield is expected to persist for several years. Which septic system components, such as pipes, D-boxes, septic pumps, and other septic system components, have the longest expected life span? Septic systems and typical septic system components have a life expectancy that is mostly dependent on the materials that were utilized during the initial installation.

Old age, lack of adequate maintenance, neglect, and misuse are among factors that might cause a septic system to fail.

The normal septic system may survive up to 30-50 years or even longer in some instances.

PROTECT.AND DON’T FORGET!

What to do if you just moved into a new home with a septic system?

If you’ve recently purchased a property that has a septic tank, you’re likely to have a lot of questions. Contact a septic pumping provider and have your septic system cleaned and pumped out as soon as possible. The majority of firms will perform a septic system examination, which will inform you where the tank is located, how big the tank is, and whether or not there are any urgent problems. It is advised that you have your septic system evaluated by a professional septic inspector in order to get a more in-depth review of your system.

  • Determines the type of system to be used, as well as the position of the tank, absorption field, and distribution boys (if any). Observations of a septic tank
  • Risers and lids that are working or that are damaged
  • Tank – flaking, cracking, crumbling, and depth Sanitary Tee — a sanitary tee that is still in good condition. the presence of and functionality of an effluent filter Levels of scum and sludge in the effluent are measured. Tank construction materials include concrete, polyethylene, and other materials.
  • Pump Chamber is operational
  • Electrical connections are operational
  • Pump Chamber is operational
  • A functional alarm is activated when the floats are activated for wastewater. The pump is located.
  • Located
  • Flow – continuous functioning flow from the home to the tank with no backups or effluent spilling to the ground surface
  • Cleanouts that are visually appealing, useful, and in tact
  • Saturation is represented by lush vegetation and wet/soggy areas.
Tips for a Healthy Septic System
  • Reduce the quantity of waste water that your system has to treat and distribute by using water-saving techniques. To decrease waste water and stress on your septic system, for example, spread out your laundry across many days of the week. Keep an eye out for dripping faucets and fix them right away, as this will help to limit the quantity of waste water that must be treated by your septic system. Surface water should be diverted away from your septic tank and drain field. Address the problem of wet soil above your drainfield, which prevents the system from processing waste water effectively. Install septic risers as necessary to ensure that your septic tank is accessible for pumping, inspection, and maintenance. In general, septic tanks should be pumped out every three to five years, depending on their size. Annual inspections can help to ensure that your system remains in good functioning order. Pumping the tank will not restore the drainage field to its original condition if it has been infested with solid waste particles. Maintain detailed records of all system repairs, pumpings, inspections, and other maintenance activities. When it comes to selling your property, these will be really advantageous. When planting trees and plants, use caution. Deep-rooted plants and bushes can infiltrate your leachfield pipelines and chambers, suffocating the flow of wastewater. Do not drive over your septic system, nor should you construct decks, pools, or other structures on top of the tank or absorption field.
Steps to Take for a Septic Tank Replacement in North Carolina
  • Contact Lentz Wastewater if you want to be put on our schedule as a replacement for an existing system. We will assist you in every stage of the procedure
  • We will be with you every step of the way. Fill out the septic repair permit application that is needed by your county. Applications for counties near Iredell can be found at the websites provided below.
  • The “Authorization to Act as Legal Representative Form” must be signed by both you and the homeowner if you are not the homeowner.
  • You can submit the application to your local environmental health agency for review and approval. Fee schedules according to county
  • An inspector from the county will come to the site and finalize the permission for the replacement of the tank.
  • Obtain a copy of the permission that has been completed
  • An official written quote from Lentz Wastewater will be supplied to you after we have a copy of the new permit granted by the health department. Utility Locate Services in North Carolina can be called
  • Pumping, crushing, and filling the current tank are all decisions made by the health department
  • The health department also selects the size, material, and placement of the new tank. Pumping and crushing the existing tank is an option.
See also:  What Sizeline Do I Need For A Septic Tank? (Solution)

In order to obtain further information on permits and costs, you should speak with your local health department. Environmental Health in Iredell County – StatesvilleContact The following phone number is for Adrienne Shea: (704) 878-5305 ext. 3456. – Statesville, North Carolina 28677 N. Center Street Application for a Septic System Permit in Iredell County Permit Fees in Iredell County Catawba CountyPhone: (828) 465-8268Catawba CountyPhone: (828) 465-8268 Catawba County Email100A SWBlvdNewton, NC 28625 – Application for a Septic Permit in Catawba County Fees for Catawba County Permits Charlotte – Mecklenburg County– Change the link if necessary.

980-314-1680Mecklenburg County EmailPhone: 980-314-1680Groundwater and Wastewater Services3205 Freedom Drive Suite 8000Charlotte, NC 28202Groundwater and Wastewater ServicesGroundwater and Wastewater ServicesGroundwater and Wastewater Services Application for a Charlotte-Mecklenburg CoSeptic Permit Fees for Permits in Mecklenburg County – 336-753-1680210 Hospital StreetMocksville, NC 27028 Davie County EmailFax: (336) 753-1680 Application for a Septic Permit in Davie County Alexander CountyPhone: 828-632-1000 Ext 311Fax: (828-632-13546125 NC Hwy 16 SouthTaylorsville, NC 28681Alexander CountyPhone: 828-632-1000 Ext 311 Application for a Septic System Permit in Alexander County Fees for Permits in Alexander County -– Rowan County’s phone number is 704-216-8533.

Tad Helmstetler402 N. Main StreetSalisbury, NC 28144 Helmstetler, Tad Fees for Rowan County Permits -– 336-679-4200213 E. Elm StYadkinville, NC 27055Yadkin CountyPhone: (336) 679-4200Email Application for a Permit in Yadkin County Fees for Permits in Yadkin County

Older Concrete Septic Tanks Often Don’t Show Deterioration

Get articles, news, and videos about Onsite Systems delivered directly to your email! Now is the time to sign up. Plus, there are Onsite Systems. Receive Notifications Message to the Editor: In the past, I’ve read your writings on tank degradation and found them to be quite interesting. Here’s what I have to say: Modern Septic Services has been in business for 25 years, and my brother and I are the owners. We acquired the firm from an uncle who had founded it in 1960 but had been in the industry for many years before to that.

  • This topic has been debated amongst ourselves, rivals, installers, homeowners, and members of the industry’s professional associations.
  • The baffle wall, on the other hand, is susceptible to attacks from both directions.
  • In 1967, the code was changed from distribution box to serial systems to reflect this shift.
  • Concrete’s overall quality Prior to 1960, the majority of the tanks in this region were constructed on-site.
  • It was usual practice to stack three storm drainpipes on end and pour a floor in between them, followed by a tank top on top of them.
  • Precast tanks began widely used starting around 1960.
  • The tanks that were erected between 1960 and the mid- to late-1970s have performed admirably.
  • In 1995, the code was amended to permit the use of an open tee for an inlet rather than a 90-degree elbow or a plugged tee.
  • San Diego County used to require coating the inside of the tanks with emulsion to a point below the working level, however this practice was discontinued due to the alleged advancement in cement technology.
  • Despite this, we still come across tanks that are 50 to 60 years old and in excellent condition.

In both effluent and sewage lift stations, we have seen a diverse spectrum of decaying organisms. The broad view is that this is a concrete quality concern that requires immediate attention. Don CraigheadModern Septic Services Inc., El Cajon, Calif. Modern Septic Services Inc., El Cajon, Calif.

How to Find Your Septic Tank

Over time, all septic tanks become clogged with sediments and must be pumped out in order to continue functioning properly. Septic tank lids are frequently located at ground level. The majority of the time, they have been buried anywhere between four inches and four feet underground. In the event that you have recently purchased a property and are unsure as to where your septic tank is located, this article will give instructions on how to identify your septic tank. Noteworthy: While every property is unique, septic tanks are usually typically huge and difficult to build.

5 Ways to Find Your Septic Tank

1. Check with the municipal records. The most straightforward method of locating your septic tank is to review the building plans for your home that were approved by the local government. You should have received an application from the business that installed the septic tank, which should contain schematics and specifications that will help you to locate the precise location where the septic tank was installed. 2. Look for highs and lows in your data. The majority of septic tanks are constructed in such a way that they are barely noticeable.

  1. 3.
  2. Almost usually, your septic tank will be constructed near where the main sewage line exits your property.
  3. Septic tanks are typically positioned between ten and twenty-five feet away from a home’s foundation.
  4. When you do, that’s when your septic tank comes into play!
  5. Look for the Lid.
  6. You will most likely find two polyethylene or fiberglass covers positioned on opposing sides of the perimeter of your septic tank if it was built after 1975 and installed after 1975.
  7. Those areas should be excavated in order to disclose the lids.
  8. Get in touch with the pros.
  9. Lifting concrete lids will necessitate the use of specialized equipment.
  10. A fall into an unprotected septic tank has the potential to be lethal.
  11. Produce your own diagram of your yard, which you may file away with your other important house paperwork.

That’s all there is to it! If you’ve been wondering where your septic tank is, you now have five alternatives to choose from, which should make finding it easier than ever. To book a plumbing service in Bastrop County, please contact us now!

Septic Systems

1. Check with the local government. To locate your septic tank, it is most likely the most straightforward method of looking through the building blueprints for your home that were prepared by the town. This application, which should include schematics and dimensions that will assist you to locate the precise location where the septic tank was built, should have been filed by the business that installed the septic tank in question. Find the highs and lows of your experience. In order to be unobtrusive, the majority of septic tanks are placed in a discreet manner.

  1. Follow the rules.
  2. Be a good sport.
  3. Track down and mark the location of the 4-inch sewer that exits the crawl space or basement, and the same location outside the house.
  4. Every few feet, insert a tiny metal probe into the earth, continuing until you reach polyethylene, fiberglass, or flat concrete.
  5. The Lid may be found in Step 4.
  6. You will most likely find two polyethylene or fiberglass covers positioned on opposing sides of the perimeter of your septic tank if it was built after 1975 and is older than that.
  7. In order to disclose the lids, you must excavate in specific areas.

Get in touch with the professionals.

Using special lifting gear to lift heavy concrete lids will be necessary.

It is possible to die after falling into an open septic tank.

Produce your own diagram of your yard, which you can file away with your other important house documentation.

That’s it!

The good news is that you now have five alternatives for locating your septic tank, making it easier than ever to discover your tank.

What size of septic tank do I need?

Probably one of the last things on your mind when you are constructing a new house is the location of your septic system.

After all, shopping for tanks isn’t nearly as entertaining as shopping for cabinetry, appliances, and floor coverings. Although you would never brag about it, your guests will be aware if you do not have the proper septic tank placed in your home or business.

septic tanks for new home construction

The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size. Of course, all of this is dependent on the number of people who live in the house as well as the amount of water and waste that will be disposed of through the plumbing system.

For the most accurate assessment of your septic tank needs, you should speak with an experienced and trustworthy sewer business representative.

planning your drainfield

Here are some helpful hints for deciding where to locate your drainfield when you’re designing it.

  • Vehicles should not be allowed on or around the drainfield. Planting trees or anything else with deep roots along the bed of the drain field is not recommended. The roots jam the pipes on a regular basis. Downspouts and sump pumps should not be discharged into the septic system. Do not tamper with or change natural drainage features without first researching and evaluating the consequences of your actions on the drainage field. Do not construct extensions on top of the drain field or cover it with concrete, asphalt, or other materials. Create easy access to your septic tank cover by placing it near the entrance. Easy maintenance and inspection are made possible as a result. To aid with evaporation and erosion prevention, plant grass in the area.

a home addition may mean a new septic tank

Do not make any big additions or renovations to your house or company until you have had the size of your septic system assessed. If you want to build a house addition that is more than 10% of your total floor space, increases the number of rooms, or necessitates the installation of new plumbing, you will almost certainly need to expand your septic tank.

  • Avoid making large additions or renovations to your house or company until you have the size of your septic system assessed. In the event that you plan to build a house addition that is more than 10% of your total floor space, increases the number of rooms, or neceessitates the installation of new plumbing, you will almost certainly need to upgrade your septic tank.

how to maintain your new septic system

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. Septic systems are something we are familiar with from our 40 years of expertise, and we propose the following:

  • Make use of the services of a qualified specialist to develop a maintenance strategy. Make an appointment for an annual examination of your septic system. Utilize the services of an effluent filter to limit the amount of particles that exit the tank, so extending the life of your septic system. Waste items should be disposed of properly, and energy-efficient appliances should be used. Make sure you get your septic system professionally cleaned every 2 to 3 years, or more frequently if necessary, by an experienced and qualified expert
  • If you have any reason to believe that there is an issue with your system, contact a professional. It is far preferable to catch anything early than than pay the price later. Maintain a record of all septic system repairs, inspections, and other activities
See also:  How To Neutraloze Brine In A Septic Tank? (Perfect answer)

common septic questions

Here are some of the most frequently asked questions by our septic customers.

How do I determine the size of my septic tank?

If you have a rectangular tank, multiply the inner height by the length to get the overall height of the tank. In order to find out how many gallons your septic tank contains, divide the number by.1337.1337

How many bedrooms does a 500-gallon septic tank support?

The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size.

How deep in the ground is a septic tank?

Your septic system is normally buried between four inches and four feet underground, depending on the climate.

The 6 Septic Systems You Must Know — Build With a Bang

Unacquainted with the many types of septic systems available? If this is the case, you are not alone. Unless your property is directly linked to the sewer system, you most certainly have a septic system in place. Sewage treatment on site is accomplished by the use of natural processes in a septic system, which is a linked system of components residing under ground. Typically, a septic system is located in the yard of a homeowner. The most typical location for septic systems is in rural locations, where there is no access to a centralized town or city waste treatment facility or sewage treatment system.

Depending on the kind of septic system, the following three essential components are required: Wastewater distribution (piping) system, which includes a septic tank, soil absorption field, drain field, and leach field

Why Concrete Septic Tanks May Be Your Best Option

First and foremost, the septic system collects and dumps the waste generated by the home in the septic tank. The septic tank then separates and pre-treats the solid waste and oils from the wastewater before releasing them into the environment. Following that, most systems direct liquid wastewater from the septic tank onto a distribution network of porous pipes that branch out from the residence and septic tank and gradually discharge the wastewater into the soil. Some septic systems, rather than just discharging wastewater into the soil, employ pumps, disinfection products, an evaporation mechanism, or simply rely on gravity to funnel wastewater through sand or other organic material before releasing the effluent into the soil.

  • The total square feet of drain field area required is determined by the number of bedrooms in the house and the soil type (arid or saturated), among other factors.
  • Septic tanks are intended to serve as the initial stop in the wastewater treatment process, and they are constructed to do so.
  • The sediments remain in the tank, while the wastewater is sent to the drain field for further treatment and dispersal when it has been treated.
  • Concrete, plastic (polyethylene), and fiberglass are the three most common materials used in construction.
  • Drain fields are plots of land that have been particularly engineered to assist in the filtering and removal of pollutants from wastewater.
  • Perforated pipes, which are buried within the trenches, are used to disseminate the wastewater from the home in a methodical manner.

Conventional System

The majority of traditional septic systems are situated in single-family residences or small commercial establishments. A high number of individuals in a single area is not often served by traditional systems, which are not normally designed for this purpose. A typical system consists of the following components: Sewage treatment system (Septic tank) An underground wastewater infiltration system or a gravel-filled drain field can both be used to collect wastewater. Protects the clean drain field from additional possible impurities with a strong geofabric covering.

The wastewater (also known as effluent) is routed from the septic tank to the drain field in this location.

As soon as the wastewater passes through the clean drain field, it flows into the soil where it is continuously cleaned by naturally existing bacteria as it gently trickles its way through the soil layer and into groundwater.

Benefit: Because most maintenance providers will be familiar with this system, it will be quite simple to repair. The disadvantage is that it is difficult to install in homes with small lots.

Chamber System

As a viable alternative to the more frequent gravel field technique, chamber systems have been in use since the 1970s. It is common to employ chamber systems in places where the water table is high, as they reduce the likelihood of poor drainage and messy back-ups. Another need for this system is a sequence of linked pipelines and chambers, with the chambers being completely enclosed by soil. The septic pipes transport wastewater from the home to the septic tank, which subsequently transports the wastewater to the chambers.

During the last stages of wastewater treatment before it is discharged into a storm drain, bacteria in the soil release the treated wastewater into the soil as it flows downward toward the groundwater table.

The disadvantage of using an extra chamber instead of a more standard drain field is that there is an increased risk of additional maintenance.

Aerobic Treatment System

Chamber systems, which have been in use since the 1970s, offer an excellent alternative to the more often used gravel field systems. It is common to employ chamber systems in locations where the water table is high, as this reduces the likelihood of poor drainage and messy backups. Another need for this system is a network of linked pipelines and chambers, with the chambers being completely enclosed by soil in certain cases. The septic pipes transport wastewater from the home to the septic tank, which subsequently transports the wastewater to the chambers and septic system.

The bacteria in the soil clean the wastewater immediately prior to the wastewater draining away from the dwelling structure, releasing the treated wastewater into the soil as it travels down to the groundwater table.

The disadvantage of using an extra chamber instead of a more standard drain field is that it increases the likelihood of further maintenance being required in the future.

Drip Distribution System

It is not necessary to install a standard gravel-based drain field since the Drip Distribution system makes use of an underground snaking system of distribution pipes that are installed near the surface of the soil. Pipe laterals for the drip distribution system are buried in shallow ground soil, generally 6 to 12 inches below the surface of the ground. Because it eliminates the requirement for a standard drain field, this technique reduces the amount of digging required and makes it easier to reach plumbing within the drain field.

A second tank, referred to as a dosage tank, is required to take wastewater after it has passed through the septic tank in order to handle this technique.

However, in order for this to happen, the dosage tank must be connected to power. Benefit: Due to the absence of a standard wastewater field system The disadvantage is that power costs will increase, as will maintenance costs.

Sand Filter System

Sand filter systems allow waste water to travel from a septic tank to a pump chamber, and then from the pump chamber to the sand filtering system. Sand filter systems are used in conjunction with septic tanks. The sand filtration system is essentially a big concrete box that is filled with sand to filter out contaminants. Following a leisurely pumping operation to the top of the box, the waste water is filtered through the sand, which treats the water prior to its discharge into the soil absorption region (see illustration).

Evapotranspiration System

In contrast to conventional septic systems, the Evapotranspiration System’s drain field is housed in a closed, waterproof field that is covered with layers of gravel and sand to keep out the elements. Once the wastewater has passed through the septic tank and into the waterproof drain field, it begins to evaporate slowly. It is important to note that, unlike other septic systems, the effluent never filters into the soil. When compared to the alternatives, the ease of installation, maintenance, and use is superior.

Benefits: The ease of use is excellent, and the difficulty of installation and maintenance is minimal.

Mound System

The mound system consists of the construction of a big sand mound that serves as a drain field. A controlled flow of wastewater is maintained throughout its journey from the septic tank to a chamber where it is pushed through to the mound. After flowing through a mound trench and percolating through the sand, the wastewater eventually trickles into the ground. Among those who live in rural locations where there is a lot of land but little absorbent soil, the mound system is a popular alternative.

Cons: It takes up a lot of room and requires a lot of upkeep.

Solid waste matter can block the pump and cause damage to the drain field if it is not pumped on a regular basis.

Garbage Disposal With Septic

Unless you reside in a septic-equipped home, it is better not to have a trash disposal. The increased volume of solid waste material will necessitate more frequent septic tank pumping and may erode the drain field, resulting in sewage back-ups in the future. Those who live in homes with septic systems may find that they must be extra cautious about what they flush down the toilet. Certain common home objects, when flushed down a toilet connected to a septic system, can create clogs, backups, and even damage to the system, resulting in not only discomfort and aggravation, but also a significant financial burden.

Chemicals may cause significant damage to and contamination of surface and groundwater, which can result in disease or even death in animals and people who consume the water.

Care should be taken to ensure that the compounds mentioned below are disposed of at designated hazardous waste depositories: Thinners, stains, and varnishes are all examples of products that fall under this category. Pesticides Oils Chemicals used in photography

Leave a Comment

Your email address will not be published. Required fields are marked *