What Are The Dimensions Of A 1500 Gallon Concrete Septic Tank? (Correct answer)

A Residential Waste Management System

1500 Gallon Monolithic Septic Tank Details
Tank dimensions	10’10” x 5’7” x 5’8”
Number of bedrooms supported	5
Pre-assembled	Yes
Ideal for high water table	Yes

fourcornersprecast.com

A 1500-gallon concrete septic tank generally measures 145 inches (L) X 78 inches (W) X 61 inches (H). However, there can be slight variations in the dimensions due to the thickness of the construction material used.

Is a 1500 gallon septic tank big?

Most residential septic tanks range in size from 750 gallons to 1,250 gallons. An average 3-bedroom home, less than 2500 square feet will probably require a 1000 gallon tank. A properly sized septic tank should hold waste for 3-years before needing to be pumped and cleaned.

How many bedrooms can a 1500 gallon septic tank have in Massachusetts?

Existing approved design flow shall be used to determine potential number of bedrooms. Systems with a leaching area designed for 1000 gallons shall be approved for a maximum of 5 bedrooms with a 1500 gallon septic tank, 4 bedrooms with a 1000 gallon tank.

How often should a 1500 gallon septic tank?

The size of the tank is one determining element regarding how often it ought to be pumped. For a household of 4 with a 1,000-gallon tank, it’s advised that it be pumped every 2.6 years, but for a 1,500-gallon tank, the time can be extended to 4.2 years and up to 5 years for a 2,000-gallon tank.

How does a 1500 gallon septic tank work?

1,500 gal tank There are perforated pipes that run under the soil and on top of gravel (aggregate); these stretch the entirety of the area so ensure the waste water is evenly distributes. The liquid slowly trickles from the pipes into the gravel and down through the soil. The gravel and soil act as biological filters.

How do I calculate the size of my septic drain field?

Drainfield Size

The size of the drainfield is based on the number of bedrooms and soil characteristics, and is given as square feet.
For example, the minimum required for a three bedroom house with a mid range percolation rate of 25 minutes per inch is 750 square feet.

Can you have a septic tank without a leach field?

The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.

How big of a septic tank do I need for a 2 bedroom house?

The recommendation for home use is a 1000 gallon septic tank as a starting point. The 1000 gallon size tank is a minimum and *can be suitable for a 2 bedroom, 3 bedroom house. Some recommendations say to add an extra 250 gallons of septic tank capacity for each bedroom over 3 bedrooms.

What are the Dimensions of a 1500 Gallon Septic Tank?

Seeing wet grass over your drain field should serve as a warning sign since it indicates that the drain field is no longer absorbing the wastewater. Consequently, sewage will back up into your home and onto your property. The dead grass over your drain field should not be watered in hopes of reviving it, as this will cause the grass to die even more quickly.

Determining the Size and dimensions of the Septic Tank

The dimensions of the septic tank are determined by the size of the tank. Experts assess the needed size of the septic tank after taking into account factors such as the size of the home and the number of people who will be living on the property. Consequently, it is critical to spend the necessary time to determine the proper size of the septic tank. The size and dimensions of a septic tank are typically determined by the total number of bedrooms in the home, the number of residents in the house, and the number of fixtures that will be serviced by the septic system.

Steps To Calculate The Size of Septic Tank

First, you must determine the total number of tenants who will be utilizing the septic system, which is done in step one. In most towns, it is expected that a two-bedroom house would have four residents, which is not always true. A typical 3-bedroom home may accommodate up to 6 people. Step 2– You may count the number of bathrooms that the tank will be able to supply. If there is just one bathroom, but you believe you might be able to install another, you should preferably include the second bathroom when determining the number of bathrooms in the house.

Plumbing fixtures such as a clothes washer, dishwasher, shower, toilet, and tap will be included in this grouping.

Step 4– You may also take your figures to the local building department.

You have the ability to choose the size of the tank.

Septic Tank Types – On the Basis of Material Used

Those who require the installation of a septic tank can choose between three different types of tanks. The choice of tank is determined by the homeowner or by the norms and regulations of the locality. The following are the most prevalent types of septic tanks. These are the ones:

A septic tank can be erected in three different ways, depending on the needs of the homeowner. The homeowner or the local norms and regulations choose which type of tank is used. Septic tanks are classified into the following categories. These are the names of the people that are involved:

As a result, the dimensions of a septic tank with a capacity of 1500 gallons might vary significantly. This discrepancy might be caused by the type of material used, the fees charged by the contractor, and other factors. A septic tank with a capacity of 1000 gallons may have modest differences in size based on the kind of tank being installed (whether it is a fiberglass tank, plastic tank or concrete tank).

As a result, it is necessary to have a basic awareness of the kind of septic tank in order to comprehend the dimension elements involved. Knowing the size of a septic tank is essential, especially when professional pumping or maintenance services are required for the tank.

Facts Related to Dimensions of a Septic Tank:

The following table provides a high-level overview of the dimensions of a septic tank. Please note that this is only an estimate, and actual values may vary depending on the exact requirements of a property.

Type of Tank	Tank Capacity	Tank Length (inches)	Tank Width(inches)	Tank Height(inches)
Concrete Septic Tank	1500 Gallon	145	78	61
Plastic or Fibreglass Septic Tank	1500 Gallon	191	60	51
Steel Septic Tank	1500 Gallon	58	58	144

Please see the following link: Dimensions of a 1000 Gallon Septic Tank.

What Happens if The Dimensions of The Septic Tank Go Wrong?

If the septic tank is not the proper size, it can cause a variety of difficulties and will not be able to transfer the sewage away as efficiently as it should. If the proportions of the building are incorrect, the health of the occupants may be jeopardized.

If the Size of the Septic Tank is Small:

If the septic tank is not of the proper size, the homeowner may have a variety of difficulties, including odor concerns.

The tank will be completely filled far too soon. In a short period of time, it will have to be pumped
There might be issues associated with frequent blockage

For example, If you have a huge gathering or a party, it may be necessary to pump it every time. If the tank is not pumped out on time, sewage will begin to back up. There may be issues associated with spilling sewage
It is likely that there will be ongoing stink issues in and around the septic tank. It is possible that the tank will not perform as expected. It is possible that it may require regular maintenance.

If the Size of the Septic Tank is Too Big

Similarly to how a small-capacity septic tank may cause several issues, a large-capacity tank is also detrimental. It takes a long time for the tank to fill up before the germs may begin to develop up inside it. This bacterial buildup is critical for the subsequent processing of sewage and must be prevented at all costs. It is unlikely that the particles in the septic tank will be properly broken down in such a condition. As a result, the septic tank will be unable to perform its functions effectively.

Questions Related to The Dimensions of a 1500 Gallon Septic Tank?

How many bedrooms can a septic tank with a capacity of 1500 gallons accommodate

A septic tank with a capacity of 1500 gallons is sufficient for a house with five bedrooms.

The optimal weight of a 1500-gallon concrete septic tank with a capacity of concrete septic tank

A concrete septic tank with a capacity of 1500 gallons weighs about 12,500 lbs. According to the thickness of the walls, the thickness of the top, the amount of rebar reinforcement, and its specific measurements, the weight varies. No, it is never advisable to drive over a septic tank with a capacity of 1500 gallons or more. The leach field will be harmed if you drive over the septic tank. Furthermore, it is possible that it will have a detrimental impact on the tank’s efficacy.

How long does it take for a 1500-gallon septic tank to fill up to capacity

It may take years for a septic tank with a capacity of 1500 gallons to completely fill. It is advised, however, that you arrange an examination every 3-5 years at the very least.

How much will it cost to construct a septic tank with a capacity of 1500 gallons

The typical cost of constructing a concrete septic tank can range between $1000 and $1,375 dollars. However, it might differ from one location to another as well as across different contractors.

The consequences of failing to pump out the septic tank on time are as follows:

The consequences of failing to pump out the septic tank on time.

Septic Tanks

Listed below is a list of the septic tanks, chlorine contact tanks, and siphon dose tank packages thatCamden Supplyoffers, along with detailed descriptions of their features and specifications. Please call Camden Supply and chat with one of our staff if you require further information on a certain product.

Single Compartment Septic Tanks

Listed below is a list of the septic tanks, chlorine contact tanks, and siphon dose tank packages thatCamden Supplyoffers, together with detailed descriptions of their specs and measurements. In order to obtain further information on a certain product, please call Camden Supply and talk with one of our staff.

Overall height is 56 inches
Overall length is 79 inches
Overall width is 48 inches

Height to center line of inlet is 48 inches
Height to center line of outflow is 45 inches
Weight is 5,000 pounds.

600 Gallon Single Septic Tank

Specifications:

Overall height is 62 inches
Overall length is 79 inches

Overall width is 48 inches
Height to center line of inlet is 52 inches
Height to center line of outflow is 49 inches

Weight is 5,000 pounds.

Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1000 Gallon Single Septic Tank

Septic tank with a single compartment made of steel reinforced concrete (SRC).

Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

Septic tank with a single compartment made of steel reinforced concrete A single piece is used for the lower area so there are no seams to come into touch with effluent. Specifications:

1250 Gallon Single Septic Tank

A one-compartment steel-reinforced concrete septic tank with the lower portion cast as a single piece so that there are no seams that come into touch with effluent. Specifications:

Overall height is 60 inches

Overall length is 117 inches
Overall width is 68 inches
Height to center line of inlet is 52 inches

Height to center line of exit is 49 inches
Weight is 10,400 pounds.

Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psiApplications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.

1500 Gallon Single Septic Tank

Specifications:

Overall height is 60 inches
Overall length is 150 inches
Overall width is 67 inches

Height to center line of inlet is 52 inches
Height to center line of exit is 49 inches
Weight is 11,700 pounds.

Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

25003500Gallon Single Septic Holding Tanks

Single Septic Holding Tank with a capacity of 2500 gallonsSpecifications:

Overall height is 68 inches
Overall length is 144 inches

Overall width is 78 inches
Height to center line of intake is 61 inches
Height to center line of outflow is 61 inches

Weight is 16,000 pounds.

Single Septic Holding Tank with 35 00 Gallon CapacitySpecifications:

Overall height is 98 inches

Overall length is 144 inches
Overall width is 78 inches
Height to center line of intake is 91 inches

Height to center line of exit is 91 inches
Weight is 20,000 pounds.

Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

Dual Compartment Septic Tanks

Description:Two-compartment tank with solids separator between the first and second compartments, holding 500 gallons and 500 gallons, respectively. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:

Overall height is 60 inches
Overall length is 96 inches
Overall width is 67 inches

Height to center line of inlet is 52 inches
Height to center line of exit is 49 inches
Weight is 10,000 pounds.

1250 Gallon Dual Septic Tank

Description:Two-compartment tank with a solids separator between the first and second compartments, holding 625 gallons and 625 gallons. Specifications:

Overall height is 60 inches
Overall length is 117 inches

Overall width is 67 inches
Height to center line of inlet is 52 inches
Height to center line of exit is 49 inches

Weight is 10,700 pounds.

1500 Gallon Dual Septic Tank

Approximately 60 inches in height, 117 inches in length, and 67 inches in width. The height to center line of intake is 52 inches, and the height to center line of outlet is 49 inches.

Approximately 60 inches in height, 117 inches in length, and 67 inches in width. The height to center line of intake is 52 inches, and the height to center line of outflow is 49 inches. The weight of the unit is 10,700 pounds.

Triple Compartment Septic Tanks

Overall Height: 60″; Overall Length: 117″; Overall Width: 67″; Height to center line of inlet: 52″; Height to center line of outlet: 49″; Weight: 10,700 lbs

Overall height is 60 inches

Overall length is 150 inches
Overall width is 67 inches
Height to center line of inlet is 52 inches

Height to center line of exit is 49 inches
Weight is 12,000 pounds.

Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections. Available with pre-wired pump packages, complete with alarm, floats, and pump pad, with horse powers from 1/3 to 1.5, with up to 135 feet of total head capacity.

Chlorine Contact Tanks

Specifications:

Specifications:

Siphon Dose Tank Packages

Specifications:

Specifications:

Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1000 Gallon Siphon Tank Package

Specifications:

It measures 60 inches in height, 102 inches in length, and 67 inches in width. It measures 52 inches in height from the center line of the inlet and 52 inches in height from the center line of the outlet. It weighs 10,000 pounds. It comes with an indoor alarm and an alarm float.

Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1250 Gallon Siphon Tank Package

Specifications:

It measures 60 inches in height, 117 inches in length, and 68 inches in width. It measures 52 inches in height from the center line of the inlet and 52 inches in height from the center line of the outlet. It weighs 10,400 pounds. It comes with an indoor alarm and an alarm float.

Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

1500 Gallon Siphon Tank Package

Specifications:

Overall height is 60 inches
Overall length is 150 inches
Overall width is 67 inches

Height to center line of intake is 52 inches
Height to center line of exit is 52 inches
Weight is 13,000 pounds

Includes indoor alarm and alarm float

Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.

Septic Tanks

We are currently in the process of uploading our items on the site, so bear with us. If you don’t find what you’re searching for, please get in touch with us for more assistance. Items 1-19 out of 19 are shown (s) Items 1-19 out of 19 are shown (s)

Classification:Septic Tanks

Uses:Residential
Classification:H-10, Old Style
Type:Concrete Septic Tank

Capacity:1000 gallon

Weight:12,025 lbs
Capacity:1000 gallons

Exterior Dimensions:49″ H x 6’4″ W x 10’5″ L
Invert Out:34″
Weight:12,025 lbs

Classification:Septic Tanks
Uses:Residential, Shallow Bury
Style:New Style

Type:Concrete, Septic Tank
Capacity:1000 gallon

It has a weight of 11,750 pounds and a capacity of 1000 gallons. Its exterior dimensions are 49 inches high by 6 feet four inches wide by 10 feet five inches long

The invert out is 34 inches.

Commercial, residential, and shallow burial applications are included under the category of Septic Tanks. The H-20 classification is applied to concrete, septic tanks of up to 1000 gallons in capacity.

Approximately 23,000 pounds

1,000-gallon capacity
Exterior dimensions: 49″ H x 6′-10″ W x 12′-10″ L
Invert out: 29 1/2″

Interior dimensions: 49″ H x 6′-10″ W x 12′-10″ L

Classification:Septic Systems
Application:Residential

Classification:H-10, Old Style
Type:Concrete, Septic Tank
Capacity:1000 gallon

Axle weight:9,590 pounds
Tank capacity:1,000 gallons
Exterior dimensions (in inches): 64 inches high by 5 feet 4 inches wide by 8 feet 0 inches long
Invert out measurement: 51 1/2 inches.

Residential
Class:New Style
Type:Concrete, Septic Tank
Size:1000 gallon
Septic System
Category:Septic Systems
Use: Residential

Axle weight:9,590 pounds
Tank capacity:1,000 gallons
Exterior dimensions (in inches): 64 inches high by 5 feet 4 inches wide by 8 feet 0 inches long
Invert out measurement: 51 1/2 inches.

Commercial and residential septic tanks are included in this category. Type:Septic tank
Capacity:1000 gallon
Class:H-20
Dimensions:

67 inches high, 5 feet wide, and 8 feet long
Invert Out: 51 1/2″
Weight: 10,757 pounds
Capacity: 1,000 gallons
Exterior Dimensions: 67 inches high, 5 feet four inches wide, and 8 feet zero inches long

Septic tanks are classified as follows: Category:Septic Tanks
Use:Commercial, Residential
Class:H-20
Type:Septic Tank
Size:1500 gallon

Commercial and residential septic tanks are included in this category. Class H-20 septic tanks are included in this category as well.

The system is classified as follows: Category:Septic Systems
Use:Residential
Class:H-10
Type:Septic Tank
Size:1500 gallon

It has a weight of 13,782 pounds and a capacity of 1,500 gallons. Its outside dimensions are 64 inches high by 6 feet four inches wide by 10 feet six inches long.

A new style septic tank in the category of septic systems, with a capacity of 1500 gallons and an intended use of residential.

It has a weight of 13,782 pounds and a capacity of 1,500 gallons. Its outside dimensions are 64 inches high by 6 feet four inches wide by 10 feet six inches long.

Commercial and residential septic tanks are included in this category. Class H-20 septic tanks are included in this category as well.

Weight: 25,025 pounds
Capacity: 2,000 gallons
Interior Dimensions: 52.5 inches “6′-0″ high by 6′-0″ wide by 12′-0” long
Exterior Dimensions: 68″ high by 6’10” wide by 12’10” deep “L
L

Dimensions: 52.5″ in length, 25.25″ in width, and 2,000 gallon capacity “Measurement in feet: 6′-0″ high x 12 feet-0″ wide x 12 feet-0 long 68″ in height, 6′-10″ wide, and 12′-10” deep on the outside “the letter “L,” and the number “L.”

Dimensions: 52.5″ in length, 25.25 in width, and 2,000 gallon capacity “The dimensions are: 6′-0″ H x 12′-0″ W x 12′-0″ L Exterior Dimensions: 68″ high by 6′-10″ wide by 12′-10” deep “L
L

Septic tanks are classified as follows: Category:Septic Tanks
Use:Commercial, Residential
Class:New Style
Type:Septic Tank
Size:2000 gallon

Categorized under Septic Tanks
Used for commercial or residential purposes
Classed as New Style
Type:Septic Tank
Capacity:2000 gal.

Classification:Septic Tanks
Uses:Residential
Classification:H-10, Old Style
Type:Concrete Septic Tank
Capacity:700 gal.

Dimensions: 26 1/2″ H x 6 ‘4″ W x 10’ 6″ L
Invert Out: 29 1/2″
Capacity: 700 gallons
Exterior Dimensions: 26 1/2″ H x 6 ‘4″ W x 10’ 6″ L
Exterior Dimensions: 26 1/2″ H x 10′ 6″ L

Category:Septic Tanks
Use:Residential
Class:New Style
Type:Concrete
Size:700 gallon

10235 lbs
700 gallons
Exterior dimensions: 26 1/2″ H x 6’4″ W x 10’6″ L
Invert out: 29 1/2″
Weight 10235 lbs
Capacity 700 gallons

Residential Shallow Bury Septic Tank, Class H-10, Old Style, Concrete, Septic Tank, Size 750 gal.

8 315 lbs
Capacity: 750 gallons
Exterior dimensions: 49″ H x 5’4″ W x 8’0″ L
Invert out: 36 1/2″
Overall weight: 8 315 lbs

Classification:Septic Tanks
Uses:Residential, Shallow Bury
Style:New Style
Type:Concrete, Septic Tank
Capacity:750 gal.

Weight:8,095 lbs
Capacity:750 gallons
Exterior Dimensions: 49″ H x 5’4″ W x 8’0″ L
Invert Out:36 1/2″
Overall Dimensions:49″ H x 5’4″ W x 8’0″ L
Overall Dimensions:49″ H x 8’0″ L

Categorie:Septic Tanks
Application:Residential
Class:H-20
Type:Concrete Septic Tank
Size:750 gallon

8 740 pounds
Capacity: 750 gallons
Outside dimensions: 52″ H x 5’4″ W x 8’0″ L
Invert out: 36 1/2″
Overall weight: 8 740 lbs

Categorization:Septic Systems
Application:Residential
Material:Plastic
Type:Septic Tank
Capacity:1000 gal.

It weighs 320 pounds and has a capacity of 1094 gallons. The outside dimensions are 127 inches long by 62.2 inches wide by 54.7 inches high
The invert out measurement is 44 inches and the invert in measurement is 47 inches.

Classification:Septic Systems
Uses:Residential
Classification:Plastic
Type:Septic Tank
Capacity:500 gallon

Concrete Septic Tanks Are Probably The Best Option — Build With a Bang

Concrete Septic Tank with a Capacity of 1000 Gallon When it comes to septic systems, whether you’re in the market for a new system or just need a replacement tank, you’ve arrived to the perfect location. As part of our recent investigation into different types of septic systems that are available for your house, we decided that it would be a good idea to also investigate the many types of septic tanks now available on the market. The following are the three most common types of septic tanks that are easily accessible for installation: When constructed properly and maintained on a regular basis, the majority of concrete septic tanks may endure for up to 40 years.

Waste flow, home size, square footage, number of bedrooms, number of bathrooms, and a few other factors are taken into consideration in septic tank size recommendations and charts.
Septic tanks are available in a variety of sizes, and you can even obtain tanks that are smaller than 1000 gallons; however, we recommend that you go with a tank that is at least 1000 square feet in size.
Consult with a licensed expert before purchasing or installing any equipment if you’re going to install a new septic tank or septic system for the first time.
” A few of states are now requiring 1000 gallon tanks as the minimum size requirement.

The popularity of the concrete septic tank can be attributed to its strength, weight, and longevity. For more precise information on durability, concrete septic tanks that are correctly constructed have a lesser probability of breaking, cracking, or floating.

Check out these 6 septic systems available for your home.

Nowadays, most concrete septic tanks are sold with a two compartment design, as opposed to the earlier style one compartment tank that was more common previously. Two compartment tanks tend to perform a better job of filtering and separating waste than one compartment tanks, which is why septic experts advocate them over a single compartment tank. All compartments are constructed with access for cleaning and pumping, regardless of the number of compartments in the system. Because it can readily handle most 0-3 bedroom dwellings, a 1000 gallon septic tank is the standard size for domestic applications.

Heavy Duty Options

Many tanks are also available in “high duty” configurations, which generally have a reinforced top and bottom. Purchasing the heavy-duty version may be a wise decision in the case that a vehicle, agricultural equipment, or other large piece of heavy machinery passes over the tank area.

Installation Requirements

Because of the size and weight of concrete septic tanks, they must be installed by a qualified specialist. These tanks are constructed of the hardest materials available, and while they are extremely durable, their installation necessitates the use of enormous, heavy machinery. If the intended or present site of your concrete septic tank does not allow for heavy machinery access, you may want to investigate a fiberglass or plastic (polyethylene) tank. Due to the fact that the majority of concrete tanks are precast, their sizes, weights, and dimensions are all different.

Lifespan and Durability

Because of the size and weight of concrete septic tanks, they must be installed by a professional. These tanks are constructed of the hardest materials available, and while they are extremely durable, their installation necessitates the use of enormous, heavy machinery. Consider a fiberglass or plastic (polyethylene) septic tank if the intended or present placement of your concrete septic tank does not allow for easy access by heavy machines. Due to the fact that the majority of concrete tanks are precast, their sizes, weights, and dimensions are all unique.

1000 Gallon Concrete Septic Tank

Septic tanks of 1000 gallon capacity or larger are the most typical size for household usage, as they can readily fit most 0-3 bedroom dwellings. Size Weight: The weight of each concrete tank is different. Some of the most common 1000 gallon concrete precast tanks are around 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh almost 9,000 lbs. Others are approximately 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh almost 9,000 lbs. Here are some examples of Jensen Precast projects completed in various cities around the United States.

1250 Gallon Concrete Septic Tank

Generally speaking, a 1250 gallon tank is a good choice for mid-size homes with 3-4 bedrooms. Size and weight: The sizes and weights of all concrete tanks are different. 1250 gallon concrete precast tanks are typically 5′ 9″ x 8′ 6″ x 5’8″ in size, with some of the more common models being 5′ 9″ x 8′ 6″ and others measuring 5′ 8″. The typical weight of a 1250 gallon concrete tank is 11,000 lbs, however this might vary depending on the distributor. Approximately 11 1/2 feet in depth, however this varies according on the distributor, state, and local statutes.

In addition, many of these bigger tank sizes are so massive that rebar and wire mesh are required within the walls and between layers to provide additional strength, stability, and durability.

1500 Gallon Concrete Septic Tank

A 1250-gallon tank is a popular choice for mid-size homes with three to four bedrooms. Overview: Each concrete tank is unique in terms of dimensions and weight. 1250 gallon concrete precast tanks are typically 5′ 9″ x 8′ 6″ x 5’8″ in size, with some of the more common models measuring 5′ 9″ x 8′ 6″. The typical weight of a 1250 gallon concrete tank is 11,000 lbs, however the weight might vary depending on the supplier. Approximately 11 1/2 feet in depth, however this varies according on the distributor, state, and local statutes.

Inlet Baffles

When installing a septic tank, an inlet baffle should be put on the inlet part closest to the point at which the sewer tank joins from the house structure to the tank. Due to the fact that it prevents scum and oils from blocking the entrance pipe, the inlet baffle is critical to the overall health and effectiveness of the septic system. The intake baffle is a bottle neck that is especially designed to do the following:

In order to prevent the breakdown process from being disrupted, it is necessary to slow the effluent entering the septic tank. A fast rate of inflow of effluent might cause problems by mistakenly combining the settled solid waste with oils, scum, and effluent. Make sure no sewage gases are allowed to enter the sewer line. These gases have the potential to infiltrate back into a home or structure, generating a foul odor.

Outlet Baffles

Every septic tank should be equipped with an exit baffle that is connected to the discharge line. The outlet baffle functions as a bottle neck in the same way as the inlet baffle, but in the opposite direction. It is meant to:

Preserving the septic tank by keeping scum, oils, and solid waste contained inside
It is necessary to prevent the discharge of waste items other than wastewater into the output pipe, drain field, and leach field.

All effluent from the septic tank must be clear of solid waste before it may be discharged. Other than that, the solids and oils will pollute the drain field/leach field and result in backups and pollutants entering the surrounding environment. Ensure that your baffles are correctly built and that they are not in need of repair by consulting with a licensed septic technician before doing anything else. Septic tanks made of fiberglass or polyethylene (polyethelyene) are also a suitable option, especially if your location has specialized environmental requirements.

Mobility

In contrast to concrete septic tanks, which normally need a vehicle equipped with a crane and boom, fiberglass and polyethylene septic tanks are quite simple to transport. Therefore, fiberglass and plastic tanks are frequently employed in places where concrete septic tank delivery vehicles are unable to reach the tanks. The majority of fiberglass and plastic septic tanks weigh roughly 300 pounds or more, however concrete septic tanks can weigh up to 20-30 times as much.

Cost Effectiveness

If you’re seeking for a less expensive alternative to concrete, fiberglass and polyethylene (polyethylene) are excellent choices. The majority of fiberglass and plastic septic tanks are thousands of dollars less expensive than concrete septic systems.

Durability

When compared to a concrete septic tank, both plastic and fiberglass septic tanks have a lower likelihood of breaking. Furthermore, because fiberglass and plastic are nonporous materials, there is typically no problem with tree or bush roots growing into the tank and generating leaks as a result of root damage. Having said that, due to the tank’s smaller profile and lighter material composition, caution must be used during installation because heavy gear might easily harm it. Tanks made of fiberglass or plastic can be destroyed in the same way as concrete tanks can if too much weight is placed on the surface above them.

Despite the fact that plastic and fiberglass tanks are quite resilient, they can nonetheless leak under specific circumstances.

As a result, it’s important to contact with a septic installation specialist before making a final decision on a certain material. The size of the lot, the position of the tank, the amount of ground water, and the weather can all influence the selection.

Float

When compared to a concrete septic tank, plastic and fiberglass septic tanks are less prone to break. Furthermore, because fiberglass and plastic are nonporous materials, there is often no problem with tree or bush roots growing into the tank and generating leaks as a result of root damage. Due to the tank’s smaller profile and lighter material composition, caution must be used during installation, since heavy gear might easily harm it. With too much weight applied on the surface above a concrete tank, fiberglass/plastic tanks are equally susceptible to damage.

Despite the fact that plastic and fiberglass tanks are quite resilient, they can nonetheless leak under specific situations.

The size of the lot, the position of the tank, the amount of ground water, and the weather can all have an impact on this decision.

Septic Tanks

The residential septic tanks we manufacture are made of precast concrete, providing homeowners in New England with a dependable wastewater management system. Shea’s precast concrete septic tanks are sturdy, waterproof, and ecologically friendly, making them an excellent choice for any home waste management system in the world. These precast septic tanks are manufactured to your specifications and are also simple to install in your house or business. For more information about our precast concrete residential septic tanks, please contact Shea Concrete Products at (800) 696-SHEA.

Take a look at the Case Study

Septic Tank 1000 Gallon

SEPTIC TANKS-Specifications- Pricing

500 GALLON PUMP TANK
	LENGTH 68″, WIDTH 64″, HEIGHT 54″, WEIGHT 5500 LBS. INLET FLOW TO BOTTOM OF TANK 44� 0UTLET 41″.
1000 GALLON SEPTIC TANK
	LENGTH 102″, WIDTH 69″, HEIGHT 59″, WEIGHT 8600LBS. INLET FLOW LINE TO BOTTOM OF TANK 49″, OUTLET 46″.
1000 GALLON LOWBOY SEPTIC TANK
	LENGTH 154″, WIDTH’ 69″, HEIGHT 46″ WEIGHT 9900 LBS. INLET FLOW LINE TO BOTTOM OF TANK 36″, OUTLET 33″.
1 000 GALLON ROSIE 2 COMPARTMENT SEPTIC TANK
	LENGTH 154″, WIDTH 69″, HEIGHT 46″, WEIGHT 10,000 LBS. INLET FLOW LINE TO BOTTOM OF TANK 36″, OUTLET 33″.

A 500-gallon tank that measures 51 inches high by 62 inches wide by 60 inches long, and a 750-gallon tank that measures 51 inches high by 62 inches wide by 103 inches long. A 1000-gallon tank that measures 51 inches high by 118 inches long, and a 1500-gallon tank that measures 51 inches high by 177 inches long.

Dimension List – Arizona Precast Septic Concepts LLC

ACTUAL SIZE

4’8″ in length, 4’8″ in width Height-4’9.5″ Approximately 45 inches from the bottom of the tank to the bottom of the stub out Outlet approximately 43 inches from the bottom of the tank to the bottom of the stub out

ACTUAL SIZE

Length: 9’9″ (bottom) and 10’5″ (top) (top) Width: 4’2′′ (bottom) and 4’9′′ (top) (top) Height-5’11” Approximately 54 inches from the bottom of the tank to the bottom of the stub out From the bottom of the tank to the bottom of the stub out, the outlet is 52 inches.

HOLE DIMENSIONS

9’9″ (bottom) and 10’5″ (top) in length (top) length (at the bottom)-4’2″ width (4’9″ width at the top (top) Height-5’11” Approximately 54 inches from the bottom of the tank to the bottom of the stub out.

From the bottom of the tank to the bottom of the stub out, the outlet is 52′′.

Grade ringsrisers, lifters, pulling irons, drainage sumps, and knockouts are all options for customizing your project to meet your specific demands and specifications. Features Benefits

Overview In the wastewater treatment and separation process, precast septic tanks are safe and dependable containment vaults that use natural treatment and separation. Designed to withstand moderate and high traffic loads, Oldcastle Infrastructure tanks are waterproof and ecologically conscious. The best solution when municipal sewers are not available, these tanks offer a variety of basic and configurable features. Grade ringsrisers, lifters, pulling irons, drainage sumps, and knockouts are all options for customizing your project to meet your specific requirements and budget. Features Benefits

Natural wastewater treatment and separation is made possible by the rugged durability of the system. Sectional design that may be customized
Installation is quick and simple. Design featuring distinct access points, block-outs, and knock-outs on each of the five sides
Base with four sides and an integral floor (body slab) as an alternative
The design of the panel part is optional. Various shapes and sizes are available. Covering and protecting
Accessibility for maintenance and inspection
Various shapes and sizes are available. Access openings of several sizes and locations are available
Customization to satisfy specific depth requirements
Various shapes and sizes are available. Various sizes are available. Cast or ductile iron covers for concrete manhole frames or concrete coverings for concrete manhole frames
Allow for simple installation
Material made of galvanized steel
2, 4, 8, and 20-ton capacity loading capabilities. There are also one-ton universal lifters available. Covers for the access openings that are elevated above ground level
Available in both rectangular and circular configurations
Available in a variety of configurations to fit a wide range of inlet and output connection sizes and heights
Custom round or rectangular forms are available based on your design parameters. In order to get the correct fit, knock-outs may be readily shattered with a hammer. The customer is responsible for installing baffles and pipework. Baffles made of precast concrete are installed in the base portion. Create a barrier to slow down effuient and keep solids in place.

Location Available

Avon, Connecticut (151 Old Farms Road)

Quote Generator

Interested in receiving an estimate for your project? While exploring our items, click on “Add to Quote Generator” to receive a quick quote for everything you require in one place. We use cookies to provide you with a better browsing experience, to monitor site traffic, to customize content, and to supply you with more relevant adverts and information. You can find out more about how we use cookies and how you can manage them by reading our Cookie Policy. If you continue to use this site, you are indicating your acceptance of the usage of cookies.X