1250 Gallon Norwesco Septic Tank – 2 Compartments / 2 Manholes AZ, CO, NV, NM, CA, OK, TX
| Part Number: | N-41744 |
|---|---|
| Capacity: | 1250 Gallons |
| Dimensions: | 116″L x 55″W x 66″H |
| Shipping Dimensions: | 116″L x 55″W x 70″H |
| Ships From: | CA |
- 1250 Gallon Septic Tank Details ; Tank dimensions: 8’ Long 5’8” wide 6’ Tall: Number of bedrooms supported: Up to 4 – Minimum size now required: Pre-assembled: Yes: Ideal for high water table: No but our 1250 gallon monolithic septic tank is. Average retail cost: $1125: Number of covers (lids) 2: Can come in traffic rated (H20) capacity: Yes: Concrete strength
What is the standard size of a septic tank?
Most residential septic tanks range in size from 750 gallons to 1,250 gallons. An average 3-bedroom home, less than 2500 square feet will probably require a 1000 gallon tank.
How often should a 1250 gallon septic tank be pumped?
A: As a general rule, a septic tank should be pumped and emptied every 3 to 5 years. Homes outside a city may rely on septic tanks since they don’t have access to city sewer lines.
How do I calculate the size of my septic drain field?
Drainfield Size
- The size of the drainfield is based on the number of bedrooms and soil characteristics, and is given as square feet.
- For example, the minimum required for a three bedroom house with a mid range percolation rate of 25 minutes per inch is 750 square feet.
How do you size a septic tank?
Septic Tank Size Calculation based Per User Consumption
- Cooking – 5 Liters.
- Bathing & Toilet – 85 Liters/Person, So for 5 person – 425 liters/Day.
- Washing cloths & Utensils – 30 Liters.
- Cleaning House – 10 Liters.
- Other – 5 Litres.
Are there different size septic tanks?
Septic tank sizes are measured in gallons, based on the amount of sewage the tank can hold. Standard tank sizes are typically 1,000, 1,250 and 1,500 gallons, and these suit most homes. Typically, the minimum tank liquid capacity of a one- to three-bedroom home is 1,000 gallons.
What should be the depth of septic tank?
Septic tank shall have minimum width of 750 mm, minimum depth of one metre below water level and a minimum liquid capacity of 1 000 litres.
Are fiberglass septic tanks good?
If you’re planning to install a new septic tank or replace an existing one, then a fiberglass tank can be a great choice! 1. They weigh less compared to steel and concrete tanks and can be easily installed anywhere. This can be a huge advantage in areas where big trucks or cranes find it difficult to reach.
Are plastic septic tanks better than concrete?
Plastic septic tanks are watertight and are immune to water-based corrosion. They are also rust-resistant. Plastic tanks are less prone to cracking since plastic is flexible, and thus a plastic septic tank does not crack as much as a cement septic tank. Plastic septic tanks are more hygienic than cement tanks.
What is the smallest septic tank you can buy?
If you’re looking to install a septic system, the smallest tank size you’re likely to find is 750-gallon, which will accommodate one to two bedrooms. You can also opt for a 1,000-gallon system, which will handle two to four bedrooms.
1250 Gallon Septic Tank – IAMPO – 60”D x 51”H x 157”L
- Household wastewater treatment, on-site sewage treatment, residential applications, light commercial hotels, schools, and neighborhood applications, and more are available.
Notes
- All images and drawings are for illustrative purposes only and may not always depict the exact product being advertised. It is possible for dimensions on polyethylene tanks to differ by +/-3 percent (typical rotational molding tolerance). It is recommended that venting systems be sized to provide for a maximum pressure or vacuum of 1/2″ water column (0.018 PSI) in polyethylene water tanks when used for water storage exclusively at atmospheric pressure. The tank is composed of BPA-free and FDA-approved materials. The resin is produced in NSF-certified manufacturing facilities. The tank must be installed and used in accordance with the manufacturer’s instructions for usage and installation in order for the warranty to be valid. According to the tank manufacturer’s guidelines, flexible connectors must be used on all fitting connections.
- All images and drawings are for illustrative purposes only and may not always depict the exact product being advertised. Plastic tanks’ dimensions may vary by +/-3 percent (typical rotational molding tolerance), depending on the material. It is recommended that venting apparatus be sized to provide for a maximum pressure or vacuum of 1/2″ water column (0.018 PSI) in polyethylene water tanks when used for water storage at atmospheric pressure only. In addition to being BPA-free, the tank is FDA-compliant. A NSF-certified manufacturing facility produces the resin
- The tank must be installed and used in accordance with the manufacturer’s installation and usage instructions in order for the warranty to be valid. As recommended by the tank manufacturer, flexible connectors must be used on all fitting connections.
$ 2,370.00 is the amount. Prices on all items displayed on our website are subject to change as a result of resin price changes that are beyond our control. Please contact our office to obtain verified price or to be placed on our waitlist for future availability (866-969-9404). Shipping and Handling Information
| Ships From | CA |
|---|---|
| Shipping Cost | Call 866-959-7593 for Shipping Quote |
Description
Septic tank with two compartments and a capacity of 1250 gallons. High-quality storage capacities are achieved via the use of state-of-the-art one-piece seamless construction. Line Drawing: 1250 gal Double Compartment Storage Container
| Capacity | 1250 |
|---|---|
| Length | 157″ |
| Width | 60″ |
| Height | 51″ |
| Material | High Density Polyethylene (HDPE) |
| Weight | 350 |
| Inlet | 3″ Pre Drilled hole with Septic T and Gasket |
| Outlet | 3″ Pre Drilled hole with Septic T and Gasket |
| Lid Size/type | (X2) 20″ NexGen D2 Lid and Gasket |
| Specific Gravity | 1.0 (Septic use only) |
| Manufacture | Snyder |
| Certifications | IAPMO |
Additional Information
Information about the company:
- GB tanks are available in a variety of sizes ranging from 750 to 10,000 gallons
- They are IAPMO certified. For a long service life, it should be non-corrosive. Lightweight design makes for simple installation.
To get a PDF version of the drawing, click on the link below. Here’s where you can get a free copy of Adobe Reader. Tank size and fitting placement may vary significantly depending on the manufacturer. Specifications are subject to change at any time and without prior notification.
PLEASE CALL 800-549-5514 FOR PRICING
| Loomis Fiberglass Septic Tanks(Inlet and outlet are from bottom of tank to bottom of hole) | |||||||
| Part Number | Type | Capacity | Weight | In/Out | Dimensions | Price | |
|---|---|---|---|---|---|---|---|
| * LGB500SS | Ribbed | 500 gallon | 250 lbs | 48″ / 45″ | 72″long x 72″widex 55″tall | N/A | |
| LGB750DS | Ribbed | 750 gallon | 320 lbs | 52″ / 49″ | 80″long x 72″wide x 60″tall | ||
| LGB1000DS | Ribbed | 1000 gallon | 370 lbs | 52″ / 49″ | 111″long x 72″wide x 60″tall | ||
| LGB1250DS | Ribbed | 1250 gallon | 430 lbs | 52″ / 49″ | 137″long x 72″wide x 60″tall | ||
| LGB1500DS | Ribbed | 1500 gallon | 470 lbs | 52″ / 49″ | 156″long x 72″wide x 60″tall | ||
| LGB2000DS | Ribbed | 2000 gallon | 1000 lbs | 68″ / 65″ | 144″long x 84″wide x 84″tall | ||
| LGB2500DS | Ribbed | 2500 gallon | 1200 lbs | 68″ / 65″ | 168″long x 84″wide x 84″tall |
There is just one compartment in this tank, which is not IAPMO approved. All tanks are manufactured in San Bernardino, California. Installation instructions and a guarantee for GB Fiberglass may be found by clicking here. To view the GB Fiberglass IAPMO Certification, please visit this page.
Available Accessories
- Extra Fiberglass Lids
- Fiberglass Risers (24″ Diameter x 24″ Height)
- Septic Tank Effluent Filters
- 4-hole or 6-hole distribution boxes
- Diverter valves
- 4-hole or 6-hole distribution boxes
Excess Fiberglass Lids; Fiberglass Risers (24″ Diameter x 24″ Height); Septic Tank Effluent Filters; Extra Fiberglass Lids; Fiberglass Risers (24″ Diameter x 24″ Height); Septic Tank Effluent Filters; Septic Tank Effluent Filters; Distributor valves with four or six holes; 4-hole or six-hole distribution boxes
1250 Gallon Septic Tanks: Precast Concrete
Precast concrete tanks, such as our 1250-gallon tank, are a suitable traditional septic tank size for a four-bedroom home. New Hampshire concrete tank sizes are most commonly found in this configuration.
1250 Gallon Septic Tank
Each 1,250 gallon septic tank that A.J. Foss creates from precast concrete is intended to hold up to 1,250 gallons of liquid waste, which is the maximum amount of liquid waste that can be contained in one tank. Our tanks meet or exceed all of the ASTM C 1227NPCA best-practice criteria. This sort of mid-seam styleconcrete septic tankallows the pipe from the home to be routed to either of the tank’s side or center intake locations. The same choice is available for the tank’s outlet drainage pipe, which may be extended out to the leach field from either the tank’s side or middle outlet drainage pipe.
If you have any questions regarding the broad selection of sizes and styles of one and two-compartment septic tanks and accessories that we produce at our state-of-the-art plant, please contact one of our knowledgeable septic specialists at A.J Foss.
| 1250 Gallon Septic Tank Details | |
|---|---|
| Tank dimensions | 8’ Long5’8” wide6’ Tall |
| Number of bedrooms supported | Up to 4 – Minimum size now required |
| Pre-assembled | Yes |
| Ideal for high water table | No but our 1500 gallon monolithic septic tank is. |
| Average retail cost | $1250 |
| Number of tank lids (covers) | 2 |
| Can come in traffic rated (H20) capacity | Yes |
| Concrete strength | 5,000 PSI |
| What are its gallons per vertical inch | 23 |
| Weight | 11,500 lbs. |
| Fiber reinforced | Yes |
| Number of inlets boots (Up to schedule 40pipe can slide through) | 3 |
| Height of inlet from bottom of tank to bottom of pipe | 63” |
| Number of outlets boots (Up to schedule 40 pipe can slide through) | 3 |
| Height of outlet from bottom of tank to bottom of pipe | 60” |
| Required height of inlet baffle (20% of liquid level) | 12” |
| Required height of outlet baffle (40% of liquid level) | 23” |
Septic tank made of precast concrete and fitted with plastic risers for a water-tight seal. It is brand new and never used.
Frequently Asked Questions
- Systems that are more traditional in nature include Concrete Chamber Systems (for anaerobic systems), Mound Septic Systems (an above-ground septic system with a drain field mound), Sand Mound or Sand Filter Septic System, Gravity Septic System (needs a gradual slope), and others.
What is the average cost of a 1250 gallon precast concrete septic tank?
Answer:In terms of septic tank prices, the typical retail price for a 1,250-gallon system is $1250 on the open market. The most important factors that influence the average price of residential septic tanks are the size of the house and the amount of water used per day (or the consistency of the flow of wastewater), which influences the gallons capacity of water flow dependent on the amount of water consumed. A five- or six-bedroom house will require at least a 1,500 gallon tank, if not a bigger tank; in contrast, a two- or three-bedroom house will require a smaller tank and, as a result, cheaper tank pricing.
What affects the average price of septic system installation by professional installers?
The following are some of the factors that might influence the typical price of septic tank installation costs:
- Choosing the right septic tank (for example, precast concrete vs lighter fiberglass tanks)
- A drainage field or absorption field of a certain size (which might have an impact on labor expenses)
- It is necessary to consider the presence of adjacent water sources (which may need the conversion of traditional septic system designs to alternative systems). Norweco Singlair Wastewater Treatment Systems, for example, are aerobic systems that employ aerobic microorganisms to treat waste water.
Soil testing to establish the soil conditions is an additional cost of installation issue to take into consideration. Get in touch with skilled specialists to acquire reliable pricing estimates for your unique tank requirements.
What is the most common septic tank size?
In New Hampshire, the septic tank with a capacity of 1250 gallons is used. Among septic designers, it is the tank that is most frequently specified and used. It is the smallest tank permitted by the New Hampshire Department of Environmental Services, and it may accommodate a dwelling with up to four bedrooms. Extra bedrooms would require an additional 250 gallons per bedroom. As a result, a septic tank of 1500 gallons would be required for a five-bedroom house.
Can you drive over a 1250 gallon size septic tank?
When it comes to driving cars or heavy machinery over a tank, the design rating is what decides whether you can. A.J. Foss makes three different types of septic tank installations: H-10 is designed for pedestrian activity and has a live load of 300 pounds per square foot plus a burial depth of 3 feet. HD is intended for burial depths up to 5 feet. The H-20 rating is for vehicular drive-over traffic up to a maximum burial depth of 6′ in the ground.
Is it ideal for high water table areas?
Answer:Our regular 1,250-gallon septic tank is constructed in two parts, with the seam running along the centre of the tank. Because the seam is located at the very top of the septic tank, our 1250 gallon monolithic septic tank is perfect for use in areas with a high water table or near bodies of water. Because the liquid sits underneath the cover, there is no risk of anything leaking in or out.
How much does a 1250 gallon concrete septic tank weigh?
In response to your question, our 1,250-gallon concrete septic tanks weigh about 11,500 pounds. Based on the specifications, wall thickness, floortop thickness, and rebar reinforcement used by different precast manufacturers, weights might vary somewhat.
How many bedrooms does a 1250 gallon septic tank support?
According to the state of New Hampshire, a 1250 gallon tank can maintain a four-bedroom house. Since the regulations were updated in 2012, it is the smallest tank size that may be specified on new designs for the first time.
- A 1250 gallon septic tank is utilized in systems with up to four bedrooms. The most often encountered tank size in New Hampshire
- The smallest tank we propose for use as a septic tank is the following: It is shipped pre-assembled to make installation as simple as possible
Why are steel tanks or plastic tanks generally not recommended?
Because it is durable, practical, and long-lasting, precast concrete continues to be the most popular material for septic tanks and systems. Plastic tanks and fiberglass tanks, which are made of lighter materials than concrete and appear to be a more cost-effective choice, might be damaged during the installation process. In the case of structural damage to a plastic or fiberglass septic tank, the tank may need to be completely replaced. Septic tanks made of plastic are only recommended for use with alternative sewage systems, such as Norweco Singulair aerobic septic systems, which use oxygen-loving bacteria in conjunction with an aerator to break down solid waste and produce cleaner wastewater effluent that can be discharged to a drain field.
Features/Details*
- A 1250 gallon septic tank is utilized in systems with up to four bedrooms. The most often encountered tank size in New Hampshire
- The smallest tank we propose for use as a septic tank is the following: It is shipped pre-assembled to make installation as simple as possible
* The information displayed is unique to New Hampshire; for information on the standards of other states, please contact us. You might also be interested in these widely used precast concrete septic tanks if you like what you see.
- The following sizes are available: Precast Concrete Septic Tank – 1000 Gallon
- Precast Concrete Septic Tank – 1250 Gallons Monolithic
- Precast Concrete Septic Tank – 1500 Gallons Monolithic
- Precast Concrete Septic Tank – 1600 Gallons
- Precast Concrete Septic Tank – 1600 Gallons Monolithic
- Precast Concrete Septic Tank – 2000 Gallons
- Precast Concrete Septic Tank – 2000 Gallons Monolithic
- Precast Concrete Septic Tank – 2000 G Precast Concrete Septic Tank – 1025/275 Gallons
- Precast Concrete Septic Tank – 1250/350 Gallons
- Precast Concrete Septic Tank – 1250/350 Gallons Monolithic
- Precast Concrete Septic Tank – 1250/500 Gallons
- Precast Concrete Septic Tank – 1500/500 Gallons Monolithic
a little about the author: The Andrew J. Foss, Inc. precast concrete firm was founded by my father in 1963 when he was just 19 years old. My precast education began at a very young age for myself. Everything I know about producing high-quality precast concrete goods, from septic tanks to concrete headwalls, was passed down to me by him. He also taught me that in order to be successful in business, you must provide a superior product and treat your customers the way you would like to be treated yourself.
Buy 1,250 Gal. Plastic Septic Tank
| Tank / Capacity | Length | Width | Height | Size | Compartments | Part | From | Price |
|---|---|---|---|---|---|---|---|---|
| 1250 Gallon Septic Tank | 118″ | 58″ | 72″ | 118″ L 58″ W 72″ H | 1 | AST-1250-1 | IA | $2,159 |
| 1250 Gallon Septic Tank | 118″ | 58″ | 72″ | 118″ L 58″ W 72″ H | 2 | AST-1250-2 | IA | $2,159 |
| 1250 Gallon Low Profile Septic Tank | 157″ | 60″ | 51″ | 157″ L 60″ W 51″ H | 2 | 43503 | MN, OH, OK, UT, WA | $2,279 |
| 1250 Gallon Septic Tank | 116″ | 55″ | 70″ | 116″ L 55″ W 70″ H | 1 | 41741 | MN, NY, OH, OK, UT, WA | $2,136 |
| 1250 Gallon Septic Tank | 116″ | 55″ | 70″ | 116″ L 55″ W 70″ H | 2 | 41743 | MN, NY, OH, OK, UT, WA | $2,283 |
| 1250 Gallon Septic Tank | 116″ | 55″ | 70″ | 116″ L 55″ W 70″ H | 2 | 41744 | CA | $2,283 |
| 1250 Gallon Low Profile Septic Tank – FL Approved | 157″ | 60″ | 51″ | 157″ L 60″ W 51″ H | 2 | 43532 | FL | $2,921 |
| 1250 Gallon Low Profile Septic Tank | 157″ | 60″ | 51″ | 157″ L 60″ W 51″ H | 1 | 43519 | MN, OH, OK, UT, WA | $2,135 |
| 1250 Gallon Low Profile Septic Tank – Intended For Use In IL | 157″ | 60″ | 51″ | 157″ L 60″ W 51″ H | 1 | 43539 | OH | $2,135 |
| 1250 Gallon Low Profile Septic Tank – Intended For Use In IL | 157″ | 60″ | 51″ | 157″ L 60″ W 51″ H | 2 | 43542 | OH | $2,279 |
| 1250 Gallon Low Profile Septic Tank | 157″ | 60″ | 51″ | 157″ L 60″ W 51″ H | 1 | 43544 | GA | $2,135 |
| 1250 Gallon Low Profile Septic Tank | 157″ | 60″ | 51″ | 157″ L 60″ W 51″ H | 2 | 43545 | GA | $2,279 |
| 1250 Gallon Low Profile Septic Tank – IAPMO Approved | 157″ | 60″ | 51″ | 157″ L 60″ W 51″ H | 2 | 44483 | CA | $2,418 |
| 1250 Gallon Low Profile Septic Tank – NC/SC Approved | 157″ | 60″ | 51″ | 157″ L 60″ W 51″ H | 2 | 43511 | GA | $2,279 |
1250 Gallon 2 Compartment Plastic Septic Tank (Preplumbed)
The following items are included in the 2-compartment septic tank: Septic tanks manufactured by Norwesco are one-piece construction, which eliminates the need for further assembly and so reduces installation time and labor.
- Rugged, one-piece tank that is rotationally molded and does not have any seams to leak
- During the installation process, there is no need for any specific backfill or water filling. During pump-outs, it is possible to pump the water out completely. It is possible to install with 6″ to 36″ of cover
- A septic tank or pump tank that can also be used for non-potable water is suitable for this use. Openings and lids for access are compatible with Norwesco manhole extensions, double-wall corrugated pipe, and ribbed PVC pipe.
Disclaimer: This tank is intended for usage below ground only.
State RequirementsApprovals
Our tanks must comply with a variety of health code standards that are in place across the United States. These codes are governed by the state or county in which you live, depending on your location. Please speak with your local health agency for assistance in choosing the tank you require.
Installation Video: (This tank already had plumbing installed when tank arrives)
- If you ask the question, no, you cannot place the plastic septic tank beneath a driveway since it is not authorized, and doing so will invalidate the guarantee. Keep tanks out of the line of heavy and vehicle traffic regions, and don’t put them beneath driveways. It is advised that bedding/backfill be made up of an equal mixture of sand and gravel (often known as “pea gravel”). 2. Is it necessary to mix the sand and gravel? 3. Is it possible to utilize a septic tank above ground? Underground plastic septic tanks are intended for use solely below ground. They are not intended for above ground usage. The use of above-ground storage tanks may result in the tank’s distortion and degradation. When compared to underground storage tanks, it is significantly more cost-effective to employ an above-ground storage tank that has been particularly constructed for above-ground uses. Is it possible to keep hot water in plastic septic tanks? Yes, but only if the water temperature is not greater than 100 degrees Fahrenheit
- Polyethylene storage tanks have a maximum storage temperature of 120 degrees Fahrenheit. Containments with a temperature greater than 120 degrees Fahrenheit, even for a short period of time, might degrade the structural integrity of the tank and making it more prone to deformation and collapse
- What is the best method of accessing an underground plastic septic tank? Each underground plastic septic tank is supplied with a manhole access hatch. Additionally, risers can be placed to the top of the tank to provide for access from the ground level. A riser would save you from having to dig up the dirt above the manway in order to get access
- Otherwise, 6. Is it possible to pick up a plastic septic tank in the area? In most circumstances, yes. You must place an order in advance in order to pick up a plastic septic tank and save money on shipping. When you are notified that your tank is ready for pickup, Plastic-mart will issue you with a six-digit trip number that will allow you to go and pick up your tank Monday through Friday from 8:30 a.m. to 2:30 p.m. Likewise, Plastic-mart and the local producers are grateful for the chance to supply local pick as well as the collaboration necessary to ensure that the process runs well.
Septic Tank: Size Matters
Septic systems are not the sort of system that is “one size fits all.” Even if one size tank may be sufficient for one home, this does not imply that it will be sufficient for all households. Talking with a plumbing and septic tank specialist will be your best bet for ensuring that you purchase the proper size tank for your needs. This article will provide you with the fundamental knowledge you need to get started on your home repair and plumbing projects.
Things to consider
The following factors should be taken into consideration when selecting the amount of septic tank that your property requires; for example,
- The following factors should be taken into consideration when selecting the amount of septic tank your home requires:
When it comes to determining the amount of septic tank your property requires, there are several factors to consider, including:
What is a Septic Tank?
Septic tanks are self-contained, subterranean chambers or containers that are meant to retain wastewater generated by a home or other building. Generally speaking, septic systems are composed of two major components: the tank and the drain field. As soon as the wastewater exits your home, it will begin to flow into the holding tank. Solid waste will settle to the bottom of the tank, forming a “sludge” layer on the bottom of the tank. Other liquids, such as oil and grease soap residue, will float to the surface, forming the “scum” layer on the surface.
This layer will be made up of wastewater, which is also referred to as effluent in some circles. Eventually, when the tank fills, the effluent drains from the tank and onto the drain field, where it is absorbed by the earth.
Are there Different Types of Septic Tanks?
Septic tanks are self-contained, subterranean chambers or containers that are meant to retain wastewater generated by a home or other structure. It is necessary to distinguish between the tank and the drain field in order to understand what a septic system is. Water will flow into the tank after the wastewater exits your home. This settling of solid waste will result in a layer of “sludge” forming at the bottom of the tank. In addition to water, other liquids such as oil and grease soap residue will rise to the surface, forming the “scum” layer on top.
Eventually, when the tank fills, the effluent drains from the tank and onto the drain field, where it is absorbed into the earth.
Concrete Septic Tanks
Designed to endure several decades, these tanks are one of the most robust solutions available for your household plumbing requirements. However, because they are the heaviest of the materials, their upkeep and installation will almost certainly be more expensive. Another thing to keep in mind is that they are prone to cracking, which can result in wastewater spilling into the surrounding ground and potentially polluting drinking water.
Plastic Septic Tanks
These tanks are more resistant to the natural, biological, and chemical processes that will take place in your tank as a result of their construction. They are also more resistant to cracking than other types of concrete. Because they are made of plastic, they are lightweight, which makes them quite simple to install. Unfortunately, if your earth moves or floods, plastic tanks have a tendency to shift and wander around underground. It is possible that your tank will move or possibly rise out of the ground as a result of this.
Fiberglass Septic Tanks
This sort of tank is more robust than plastic since it is less likely to flex or shift when it is placed in a stable location. Additionally, they are more cost-effective than concrete septic tanks because to their lightweight and noncorrosive nature both within and outside the tank. Unlike plastic or concrete tanks, they are also less prone to suffer structural damage than those materials.
Steel Septic Tanks
These tanks are becoming increasingly rare, but it doesn’t rule out the possibility of seeing one in the future. Steel is the least expensive of the materials used in septic tanks, but it does so at the expense of durability. Despite the fact that they are intended to endure between 20 and 25 years, they frequently rust before they have reached their entire lifespan. Now that we’ve covered the essential background material, let’s move on to the actual subject at hand.
What Size Septic Tank Do You Need?
- Home with fewer than 1.500 square feet = 750-gallon tank
- Home with fewer than 2,500 square feet = 1,000-gallon tank
- Home with fewer than 3,500 square feet = 1,250-gallon tank
- Home with fewer than 4,500 square feet = 1,250-gallon tank
- And home with fewer than 5,500 square feet = 1,315-gallon tank
- Home with fewer than 2,500 square feet = 1,315-gallon tank
Conclusion
Keep in mind that the information provided above is only a preliminary approximation. The actual size of the tank you want will be determined by a combination of the criteria listed above as well as the regulations of your local jurisdiction. Talking to a professional plumber and septic system installation is your best choice for ensuring that you are not only complying with local standards, but that you are also getting the “most bang for your buck.” Back-ups or the need for more frequent pumping and maintenance may result if you choose the incorrect size septic tank or if you have too many people living in a home with a smaller septic tank.
If you choose the incorrect size septic tank or have too many people living in a home with a smaller septic tank If you’re ready to become a member of the septic tank family, get in touch with us right away!
We would be delighted to assist you with your new residential plumbing endeavor. Please contact us for more information.
Sizes of Septic Tanks & Shapes
Most septic tanks are built of fiberglass, plastic, or reinforced concrete, with certain exceptions. Metal tanks are also available, but because of their tendency to corrode quickly, they are not normally advised. Septic tanks are available in a variety of shapes, including rectangular, round, and oval, however the design of a septic tank does not normally alter its operation. When selecting a septic tank, the most critical consideration is ensuring that the tank is the appropriate size for your home’s needs.
Concrete Tank Construction
Concrete septic tanks are large and heavy, and their form is commonly rectangular. They’re often built in one of three ways: with a mid-seal, a top-seal, or a monolithic construction. Mid-seal tanks are made up of two sections that are bonded together with mastic sealant to form one unit. A top-seal tank is a one-piece tank with a concrete cover that is attached to the tank. Monolithic cast tanks are constructed in a factory as a single unit, making them more waterproof than other forms of concrete tanks, but they are also more expensive than other types of concrete tanks.
Fiberglass and Plastic Tanks
In circular or capsule-like designs, fiberglass and plastic tanks have a nearly impenetrable waterproof seal and are therefore ideal for use in the marine environment. The cost of these tanks is more than that of concrete units, but because they are manufactured as a continuous piece, there are no seams. They are also lighter and more resistant to impact cracks than concrete tanks.
A Range of Tank Sizes
Septic tank capacities are measured in gallons, and are determined by the quantity of sewage that the tank can contain in total. It is necessary for septic tanks to store at least two days’ worth of sewage from your residence in order for the solids to be adequately separated from the liquids before the liquids are allowed to enter the absorption area. The size of the tank is determined by the number of bedrooms in your home. Standard tank sizes are generally 1,000, 1,250, and 1,500 gallons, and they are sufficient for the majority of residences in the United States.
A four-bedroom home requires a tank with a minimum liquid capacity of 1,250 gallons, while a five-bedroom residence requires a tank with a minimum liquid capacity of 1,500 gallons.
Estimating Your Needed Tank Size
The size of the tank is computed using a straightforward formula, while other considerations, such as the soil type, must be taken into consideration. Therefore, it is important to have a professional analyze the site and your property in order to decide the optimal size of tank for your needs and requirements. The minimum size necessary for your home may be estimated by multiplying 150 gallons per bedroom by two, and then multiplying that figure twice more than the amount of time needed to retain the water (48 hours).
Assuming your property has more than six bedrooms, or five bedrooms plus a hot tub, you would multiply 150 times 6, and the resultant figure (900) would be increased by two to give you a minimum liquid capacity of 1,800 gallons.
Concrete Septic Tanks Are Probably The Best Option — Build With a Bang
Concrete Septic Tank with a Capacity of 1000 Gallon When it comes to septic systems, whether you’re in the market for a new system or just need a replacement tank, you’ve arrived to the perfect location. As part of our recent investigation into different types of septic systems that are available for your house, we decided that it would be a good idea to also investigate the many types of septic tanks now available on the market. The following are the three most common types of septic tanks that are easily accessible for installation: When constructed properly and maintained on a regular basis, the majority of concrete septic tanks may endure for up to 40 years.
- Waste flow, home size, square footage, number of bedrooms, number of bathrooms, and a few other factors are taken into consideration in septic tank size recommendations and charts.
- Septic tanks are available in a variety of sizes, and you can even obtain tanks that are smaller than 1000 gallons; however, we recommend that you go with a tank that is at least 1000 square feet in size.
- Consult with a licensed expert before purchasing or installing any equipment if you’re going to install a new septic tank or septic system for the first time.
- ” A few of states are now requiring 1000 gallon tanks as the minimum size requirement.
- The popularity of the concrete septic tank can be attributed to its strength, weight, and longevity.
Check out these 6 septic systems available for your home.
Nowadays, most concrete septic tanks are sold with a two compartment design, as opposed to the earlier style one compartment tank that was more common previously. Two compartment tanks tend to perform a better job of filtering and separating waste than one compartment tanks, which is why septic experts advocate them over a single compartment tank. All compartments are constructed with access for cleaning and pumping, regardless of the number of compartments in the system. Because it can readily handle most 0-3 bedroom dwellings, a 1000 gallon septic tank is the standard size for domestic applications.
Heavy Duty Options
Many tanks are also available in “high duty” configurations, which generally have a reinforced top and bottom.
Purchasing the heavy-duty version may be a wise decision in the case that a vehicle, agricultural equipment, or other large piece of heavy machinery passes over the tank area.
Installation Requirements
Because of the size and weight of concrete septic tanks, they must be installed by a qualified specialist. These tanks are constructed of the hardest materials available, and while they are extremely durable, their installation necessitates the use of enormous, heavy machinery. If the intended or present site of your concrete septic tank does not allow for heavy machinery access, you may want to investigate a fiberglass or plastic (polyethylene) tank. Due to the fact that the majority of concrete tanks are precast, their sizes, weights, and dimensions are all different.
Lifespan and Durability
The method by which the concrete septic tank was constructed will have an impact on its long-term function. High-quality concrete, adequate water sealing, and the use of structural steel goods such as mesh and rebar will provide additional support, strength, and structural integrity to the structure. Keep in mind that concrete septic tanks are more prone to cracking and leaking than their plastic and fiberglass equivalents when exposed to exceptionally cold temperatures and pressures. Most concrete septic tanks have a lifespan of up to 40 years if they are constructed properly and serviced on a regular basis.
1000 Gallon Concrete Septic Tank
Septic tanks of 1000 gallon capacity or larger are the most typical size for household usage, as they can readily fit most 0-3 bedroom dwellings. Size Weight: The weight of each concrete tank is different. Some of the most common 1000 gallon concrete precast tanks are around 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh almost 9,000 lbs. Others are approximately 5′ 1″ X 8′ 2″ X 5′ 8″ in size and weigh almost 9,000 lbs. Here are some examples of Jensen Precast projects completed in various cities around the United States.
1250 Gallon Concrete Septic Tank
Generally speaking, a 1250 gallon tank is a good choice for mid-size homes with 3-4 bedrooms. Size and weight: The sizes and weights of all concrete tanks are different. 1250 gallon concrete precast tanks are typically 5′ 9″ x 8′ 6″ x 5’8″ in size, with some of the more common models being 5′ 9″ x 8′ 6″ and others measuring 5′ 8″. The typical weight of a 1250 gallon concrete tank is 11,000 lbs, however this might vary depending on the distributor. Approximately 11 1/2 feet in depth, however this varies according on the distributor, state, and local statutes.
1500 Gallon Concrete Septic Tank
Generally speaking, a 1500-gallon tank is the most popular size for large homes with five or more bedrooms. Size and weight: The sizes and weights of all concrete tanks are different. The dimensions of some of the most common 1500 gallon concrete precast tanks are around 6′ x 10′ 9″ x 5′ 5″ in length and width. The typical weight of a 1500 gallon concrete tank is 12,000 lbs, which is rather heavy.
Approximately 12 feet in depth, however this varies according on the distributor, state, and local statutes. Baffles at the input and output of the system aid in the separation of solid waste items, oils, and scum from the effluent.
Inlet Baffles
When installing a septic tank, an inlet baffle should be put on the inlet part closest to the point at which the sewer tank joins from the house structure to the tank. Due to the fact that it prevents scum and oils from blocking the entrance pipe, the inlet baffle is critical to the overall health and effectiveness of the septic system. The intake baffle is a bottle neck that is especially designed to do the following:
- In order to prevent the breakdown process from being disrupted, it is necessary to slow the effluent entering the septic tank. A fast rate of inflow of effluent might cause problems by mistakenly combining the settled solid waste with oils, scum, and effluent. Make sure no sewage gases are allowed to enter the sewer line. These gases have the potential to infiltrate back into a home or structure, generating a foul odor.
Outlet Baffles
Every septic tank should be equipped with an exit baffle that is connected to the discharge line. The outlet baffle functions as a bottle neck in the same way as the inlet baffle, but in the opposite direction. It is meant to:
- Preserving the septic tank by keeping scum, oils, and solid waste contained inside
- It is necessary to prevent the discharge of waste items other than wastewater into the output pipe, drain field, and leach field.
All effluent from the septic tank must be clear of solid waste before it may be discharged. Other than that, the solids and oils will pollute the drain field/leach field and result in backups and pollutants entering the surrounding environment. Ensure that your baffles are correctly built and that they are not in need of repair by consulting with a licensed septic technician before doing anything else. Septic tanks made of fiberglass or polyethylene (polyethelyene) are also a suitable option, especially if your location has specialized environmental requirements.
Mobility
In contrast to concrete septic tanks, which normally need a vehicle equipped with a crane and boom, fiberglass and polyethylene septic tanks are quite simple to transport. Therefore, fiberglass and plastic tanks are frequently employed in places where concrete septic tank delivery vehicles are unable to reach the tanks. The majority of fiberglass and plastic septic tanks weigh roughly 300 pounds or more, however concrete septic tanks can weigh up to 20-30 times as much.
Cost Effectiveness
If you’re seeking for a less expensive alternative to concrete, fiberglass and polyethylene (polyethylene) are excellent choices. The majority of fiberglass and plastic septic tanks are thousands of dollars less expensive than concrete septic systems.
Durability
When compared to a concrete septic tank, both plastic and fiberglass septic tanks have a lower likelihood of breaking. Furthermore, because fiberglass and plastic are nonporous materials, there is typically no problem with tree or bush roots growing into the tank and generating leaks as a result of root damage. Having said that, due to the tank’s smaller profile and lighter material composition, caution must be used during installation because heavy gear might easily harm it. Tanks made of fiberglass or plastic can be destroyed in the same way as concrete tanks can if too much weight is placed on the surface above them.
Despite the fact that plastic and fiberglass tanks are quite resilient, they can nonetheless leak under specific circumstances.
As a result, it’s important to contact with a septic installation specialist before making a final decision on a certain material. The size of the lot, the position of the tank, the amount of ground water, and the weather can all influence the selection.
Float
Plastic and fiberglass have a number of advantages, but they can also be troublesome. Yes, the lightweight character of these materials makes them perfect for installation, but same lightweight nature also results in a high level of buoyancy in the final product. It is possible that during a storm, a plastic or fiberglass tank can get dislodged from its couplings, causing considerable damage to the septic system and the homeowner’s property, with repair costs in the hundreds of dollars. A simple solution is to place a concrete slab on top of the tank to help weigh it down.
If you reside in an area with a high groundwater table, consult with a specialist to ensure that the higher water table will not cause harm to your fiberglass or plastic tank.
What size of septic tank do I need?
Plastic and fiberglass have a number of advantages, but they can also provide challenges. It is true that the lightweight character of these materials makes them excellent for installation; but, same lightweight nature also results in a high level of buoyancy. While driving during a storm, it is possible that a plastic or fiberglass tank can get dislodged from its couplings, causing substantial damage to the septic system and the homeowner’s property that would cost thousands of dollars to fix.
While building a concrete bed and tying it to a fiberglass/plastic septic tank for stability is commendable, it is a little ironic.
The Lowdown on 1000 gallon concrete septic tank,concrete septic tanks,1500 gallon septic tank,concrete septic tank,fiberglass septic tanks,how long do septic tanks last,septic tanks sizes,septic tank size,plastic septic tanks,how a septic system works,septic tank baffle,sizes of septic tanks,poly septic tank,septic tanks problems,types of septic tanks,
septic tanks for new home construction
The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size. Of course, all of this is dependent on the number of people who live in the house as well as the amount of water and waste that will be disposed of through the plumbing system.
For the most accurate assessment of your septic tank needs, you should speak with an experienced and trustworthy sewer business representative. They can assist you in planning the intricacies of your septic system, including which sort of septic system will be most beneficial to you.
planning your drainfield
Here are some helpful hints for deciding where to locate your drainfield when you’re designing it.
- Vehicles should not be allowed on or around the drainfield. Planting trees or anything else with deep roots along the bed of the drain field is not recommended. The roots jam the pipes on a regular basis. Downspouts and sump pumps should not be discharged into the septic system. Do not tamper with or change natural drainage features without first researching and evaluating the consequences of your actions on the drainage field. Do not construct extensions on top of the drain field or cover it with concrete, asphalt, or other materials. Create easy access to your septic tank cover by placing it near the entrance. Easy maintenance and inspection are made possible as a result. To aid with evaporation and erosion prevention, plant grass in the area.
a home addition may mean a new septic tank
Vehicles should not be allowed on or near the drainfield. Planting trees or anything else with deep roots near the drain field’s bed is not recommended. Clogged pipes are frequently caused by the roots of plants; Downspouts and sump pumps should not be drained into the septic system; and If you want to tamper with or change natural drainage characteristics, do so after researching and evaluating the impact on the drain field. Do not construct extensions on top of the drain field or cover it with concrete, asphalt, or other similar materials.
Easy maintenance and inspection are made possible as a result of this; To aid with evaporation and erosion prevention, plant grass in the soil.
- For a home addition that will result in increased use of your septic system, your local health department will require a letter from you that has been signed and authorized by a representative of your local health department confirming that your new septic system is capable of accommodating the increase in wastewater. It is not recommended that you replace your septic system without the assistance of a certified and competent contractor.
how to maintain your new septic system
Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. Septic systems are something we are familiar with from our 40 years of expertise, and we propose the following:
- Make use of the services of a qualified specialist to develop a maintenance strategy. Make an appointment for an annual examination of your septic system. Utilize the services of an effluent filter to limit the amount of particles that exit the tank, so extending the life of your septic system. Waste items should be disposed of properly, and energy-efficient appliances should be used. Make sure you get your septic system professionally cleaned every 2 to 3 years, or more frequently if necessary, by an experienced and qualified expert
- If you have any reason to believe that there is an issue with your system, contact a professional. It is far preferable to catch anything early than than pay the price later. Maintain a record of all septic system repairs, inspections, and other activities
common septic questions
Here are some of the most frequently asked questions by our septic customers.
How do I determine the size of my septic tank?
If you have a rectangular tank, multiply the inner height by the length to get the overall height of the tank. In order to find out how many gallons your septic tank contains, divide the number by.1337.1337
How many bedrooms does a 500-gallon septic tank support?
The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size.
How deep in the ground is a septic tank?
This is mostly determined by the square footage of the house and the number of people that will be living in it, as well as other factors. A typical household septic tank holds between 750 and 1,250 gallons of water. Typically, a 1000 gallon tank will be required for a three-bedroom home that is less than 2500 square feet in size.
1250 Gallon Plastic Septic Tank – Single Compartment
However, they still provide the excellent structure and safety that you expect from an Ace Roto-Mold septic tank. They are stronger, less difficult to install, and less expensive than traditional concrete septic tanks. Ace Roto-Mold tanks, which are made of high-density polyethylene with ultraviolet inhibitors, have a horizontal flow that is suitable for below-ground installations up to 36 inches in depth. NSF has certified that the 1000, 1250, and 1500 gallon double-compartment septic tanks meet or exceed the requirements of the IAPMO Z1000 and CAN/CSA-B-66 standards.
- A thorough quality control process is used in the design and construction of Ace Roto-Mold septic tanks.
- Ace tanks are the only ones that have a custom-molded gasket in the lid.
- With our innovative lid design, nylon ties hold the lid in place, avoiding the need for metal fasteners that might corrode and fail in the long run.
- By using an exit baffle, you may enable the partially treated liquids to flow out and be treated further.
Septic tanks are available in one-compartment and two-compartment configurations, and they are designed to hold liquids with specific gravities up to 1.7. Tank accessories, including as extensions, risers, access covers, and fittings, are available for an extra charge.
1250 Gallon Plastic Septic Tank – Double Compartment
However, they still provide the excellent construction and safety that you expect from an Ace Roto-Mold septic tank. They are stronger, less difficult to install, and less expensive than traditional concrete tanks. Ace Roto-Mold tanks, which are made of high-density polyethylene with ultraviolet inhibitors, have a horizontal flow that is suitable for below-ground installations up to 36 inches in diameter. National Sanitation Foundation (NSF) has certified that the 1000, 1250, and 1500 gallon double-compartment septic tanks meet or exceed IAPMO Z1000 and CAN/CSA-B-66 specifications.
- Quality control is rigorously enforced during the design and manufacturing of Ace Roto-Mold septic tanks and systems.
- Ace tanks are the only ones with a lid gasket that has been custom-molded.
- Using nylon ties to hold the lid in place, we have eliminated the need for metal fasteners, which can corrode and fail in the long term.
- It is possible for partially treated liquids to flow out of the baffles and into the next stage of treatment.
- There are one-compartment and two-compartment septic tanks available for purchase, and they are designed to hold liquids with specific gravities of up to 1.7.
Guardian 1-Piece Fiberglass Tanks – Equinox
The Guardian Assurance Program Providing that the installation is shown to be satisfactory to Equinox Industries Ltd, Equinox Industries Guardian tanks are warranted for a period of ten years against defects in materials and workmanship and will function in accordance with the manufacturer’s specifications. Equinox Industries Ltd. may provide a complete statement of warranty upon request. Overburden up to a maximum of 2 feet (609 mm) in height in slender burial tanks. Tanks for deep burial with an overburden of up to 7 feet (21134 mm).
When ordering, be sure to specify the depth of burial.
G-1000 Guardian 1-Piece Fiberglass Tanks – 1000 Gallon (4545 litres)
| Model | Tank Type | Retention Imp. Gal. / Litres | Dimensions in. / mm | Downloads |
|---|---|---|---|---|
| G-1000-H | Holding | 1000 (4545) | 64 x 117 (1626 x 2972) | G-1000 Photo|Fiberglass Holding Specification Sheet |
| G-1000-P | Pump-Out | 837 (3869) | 64 x 106 (1626 x 2692) | G-1000 Photo|Fiberglass Pump-Out Specification Sheet |
| G-1000-T‡ | Trickle | 900 (4091) | 64 x 117 (1626 x 2972) | G-1000 Photo|Fiberglass Trickle Specification Sheet |
| G-1000-S | Siphon | 790 (3591) | 64 x 117 (1626 x 2972) | G-1000 Photo|Fiberglass Siphon Specification Sheet |
G-1250 Guardian 1-Piece Fiberglass Tanks – 1250 Gallon (5683 litres)
| Model | Tank Type | Retention Imp. Gal. / Litres | Dimensions in. / mm | Downloads |
|---|---|---|---|---|
| G-1250-H | Holding | 1250 (5683) | 64 x 143 (1626 x 3632) | G-1250 Photo|Fiberglass Holding Specification Sheet |
| G-1250-P | Pump-Out | 1062 (4727) | 64 x 128 (1626 x 3251) | G-1250 Photo|Fiberglass Pump-Out Specification Sheet |
| G-1250-T‡ | Trickle | 1125 (5114) | 64 x 143 (1626 x 3632) | G-1250 Photo|Fiberglass Trickle Specification Sheet |
| G-1250-S | Siphon | 1015 (4614) | 64 x 143 (1626 x 3632) | G-1250 Photo|Fiberglass Siphon Specification Sheet |
G-1500 Guardian 1-Piece Fiberglass Tanks – 1500 Gallon (6819 litres)
| Model | Tank Type | Retention Imp. Gal. / Litres | Dimensions in. / mm | Downloads |
|---|---|---|---|---|
| G-1500-H | Holding | 1500 (6819) | 64 x 169 (1626 x 4293) | G-1500 Photo|Fiberglass Holding Specification Sheet |
| G-1500-P | Pump-Out | 1287 (5850) | 64 x 152 (1626 x 3861) | G-1500 Photo|Fiberglass Pump-Out Specification Sheet |
| G-1500-T‡ | Trickle | 1350 (6137) | 64 x 169 (1626 x 4293) | G-1500 Photo|Fiberglass Trickle Specification Sheet |
| G-1500-S | Siphon | 1240 (5637) | 64 x 169 (1626 x 4293) | G-1500 Photo|Fiberglass Siphon Specification Sheet |
G-1750 Guardian 1-Piece Fiberglass Tanks – 1750 Gallon (7956 litres)
| Model | Tank Type | Retention Imp. Gal. / Litres | Dimensions in. / mm | Downloads |
|---|---|---|---|---|
| G-1750-H | Holding | 1750 (7956) | 64 x 195 (1626 x 4953) | G-1750 Photo|Fiberglass Holding Specification Sheet |
| G-1750-P | Pump-Out | 1512 (6873) | 64 x 178 (1626 x 4521) | G-1750 Photo|Fiberglass Pump-Out Specification Sheet |
| G-1750-T‡ | Trickle | 1575 (7160) | 64 x 195 (1626 x 4953) | G-1750 Photo|Fiberglass Trickle Specification Sheet |
| G-1750-S | Siphon | 1465 (6660) | 64 x 195 (1626 x 4953) | G-1750 Photo|Fiberglass Siphon Specification Sheet |
G-2000 Guardian 1-Piece Fiberglass Tanks – 2000 Gallon (9092 litres)
| Model | Tank Type | Retention Imp. Gal. / Litres | Dimensions in. / mm | Downloads |
|---|---|---|---|---|
| G-2000-H | Holding | 2000 (9092) | 64 x 219 (1626 x 5563) | G-2000 Photo|Fiberglass Holding Specification Sheet |
| G-2000-P | Pump-Out | 1737 (7895) | 64 x 202 (1626 x 5131) | G-2000 Photo|Fiberglass Pump-Out Specification Sheet |
| G-2000-T‡ | Trickle | 1800 (8183) | 64 x 219 (1626 x 5563) | G-2000 Photo|Fiberglass Trickle Specification Sheet |
Notes:Manway Extension Sleeves are available for purchase separately. All tanks are equipped with a bonded 30 inch (762 mm) diameter manway that measures 2 feet (610 mm) in length. Tanks with a single chamber.
