1000 Gallon Plastic Septic Tanks
| Tank / Capacity | Length | Size |
|---|---|---|
| 1000 Gallon Septic Tank | 101″ | 101″ L 52″ W 71″ H |
| 1000 Gallon Septic Tank | 102″ | 102″ L 60″ W 63″ H |
| 1000 Gallon Septic Tank | 102″ | 102″ L 60″ W 63″ H |
| 1000 Gallon Septic Tank | 102″ | 102″ L 60″ W 63″ H |
10
septictankpro.com
- On average, septic tanks are 4.5 feet wide, 8 feet long, and 6 feet tall. The number of bedrooms and number of people in your home will determine the dimensions of the septic tank you need. 1,000-gallon septic tanks are 8 feet 2 inches long, 5 feet 8 inches wide, and 5 feet 1 inch deep.
What is the size of plastic septic tanks?
The 750, 1000, 1250 and 1500 gallon sizes are available in both one and two compartment configurations. NORWESCO septic tanks are for BELOW GROUND USE ONLY. Using the tanks above ground may result in deformation of the tank.
How long do plastic septic tanks last?
A septic tank can last between 20 and 40 years. The lifespan depends on the tank’s material. A steel tank lasts 20 years, while a concrete tank lasts 40 years. Plastic tanks can last as long as 30 years.
How long does it take to fill a 1000 gallon septic tank?
Therefore, it will take about 5 years for one adult to fill 300 gallons of a 1,000-gallon septic tank with sludge and scum. A family of four will fill the 300-gallon storage volume of a 1,000-gallon septic tank in about 1.5 years.
How big is a septic tank dimensions?
A typical residential septic tank is usually about 4.5 feet wide x 8.0 feet long x 6 feet tall. Your septic tank may be a different size however.
How much does a plastic septic tank weigh?
Plastic septic tanks tend to weigh between 80 to 500 lbs, fiberglass tanks weigh between 300 to 500 lbs, while precast concrete septic tanks can weigh well above 8,000 lbs.
What is the largest septic holding tank?
The 10,000 gallon holding tank is the ideal waste containment solution to service multiple rural homes, a farmstead complex or a commercial operation. While this model is our largest septic holding tank, multiple tanks can be installed to meet any requirements and to allow for future expansion.
Are plastic septic tanks good?
Plastic septic tanks are watertight and are immune to water-based corrosion. They are also rust-resistant. Plastic tanks are less prone to cracking since plastic is flexible, and thus a plastic septic tank does not crack as much as a cement septic tank. Plastic septic tanks are more hygienic than cement tanks.
How much does a 1000 gallon steel septic tank weigh?
PRODUCT TANK APPROX WEIGHT 10300 LBS.
What does a 500 gallon concrete septic tank weigh?
500 Gallon Siphon Tank Package Height to center line of inlet: 48” Height to center line of outlet: 48” Weight: 5,000 lbs.
Buy 1,000 Gal. Plastic Septic Tank
Septic tanks for sale in the 1000 gallon capacity are available for purchase at the most competitive costs online.
| Tank / Capacity | Length | Width | Height | Size | Compartments | Part | From | Price |
|---|---|---|---|---|---|---|---|---|
| 1000 Gallon Septic Tank | 101″ | 60″ | 60″ | 101″ L 60″ W 60″ H | 1 | AST-1000-1 | IA | $1,692 |
| 1000 Gallon Septic Tank | 101″ | 60″ | 60″ | 101″ L 60″ W 60″ H | 2 | AST-1000-2 | IA | $1,852 |
| 1000 Gallon Septic Tank | 101″ | 52″ | 71″ | 101″ L 52″ W 71″ H | 1 | 44622 | MN, OH | $0 |
| 1000 Gallon Septic Tank | 102″ | 60″ | 63″ | 102″ L 60″ W 63″ H | 1 | 41718 | GA, MN, MS, NY, OH, OK, UT, WA | $1,922 |
| 1000 Gallon Septic Tank | 102″ | 60″ | 63″ | 102″ L 60″ W 63″ H | 2 | 41720 | GA, MN, MS, NY, OH, OK, UT, WA | $2,020 |
| 1000 Gallon Septic Tank | 102″ | 60″ | 63″ | 102″ L 60″ W 63″ H | 2 | 41721 | CA | $2,020 |
| 1000 Gallon Above Ground Septic Holding TankShips Fast! ~ 48 Hour Lead Time | 136″ | 91″ | 20″ | 136″ L 91″ W 20″ H | No | 1000GB | MS | $2,400 |
| 1000 Gallon Low Profile Septic TankShips Fast! ~ 48 Hour Lead Time | 127″ | 60″ | 51″ | 127″ L 60″ W 51″ H | 1 | 42405 | GA, MN, OH, OK, UT, WA | $1,679 |
| 1000 Gallon Low Profile Septic TankShips Fast! ~ 48 Hour Lead Time | 127″ | 60″ | 51″ | 127″ L 60″ W 51″ H | 2 | 43517 | GA, MN, OH, OK, UT, WA | $1,794 |
| 1000 Gallon Low Profile Septic Tank – Intended For Use In IL | 127″ | 60″ | 51″ | 127″ L 60″ W 51″ H | 1 | 43538 | OH | $1,679 |
| 1000 Gallon Low Profile Septic Tank – Intended For Use In IL | 127″ | 60″ | 51″ | 127″ L 60″ W 51″ H | 2 | 43541 | OH | $1,794 |
| 1000 Gallon Low Profile Septic Tank – IAPMO Approved | 127″ | 60″ | 51″ | 127″ L 60″ W 51″ H | 2 | 44482 | CA | $1,903 |
| 1000 Gallon Low Profile Septic Tank – NC/SC Approved | 127″ | 60″ | 51″ | 127″ L 60″ W 51″ H | 2 | 43510 | GA | $1,794 |
| 1050 Gallon Low Profile Septic Tank – FL Approved | 127″ | 60″ | 51″ | 127″ L 60″ W 51″ H | 2 | 43533 | FL | $2,108 |
1000 Gallon Plastic Septic Tank – 1 Compartment A-AST-1000-1
| Part Number: | A-AST-1000-1 |
| Capacity: | 1000 Gallons |
| Dimensions: | 101″L x 60″W x 60″H |
| Availability: | In Stock |
| Ships From: | IA |
| Description:Ace Roto-Mold septic tanks are stronger, easier to install, and less costly than old-fashioned concrete septic tanks- yet they still offer the quality construction and safety you expect. Manufactured from high-density polyethylene with U.V. inhibitors, Ace Roto-Mold tanks utilize a horizontal flow designed for below ground installations up to 36 inches. Ace Tanks are IAPMO approved and have passed strenuous stress tests. Each tank carries an individual serial code and is fully document from date of manufacture. Ace Roto-Mold septic tanks are designed and manufactured with rigorous quality controls. The trapezoidal deep-rib design and interior baffle system make Ace Tanks the industry choice. Only Ace tanks feature a custom-molded gasket in the lid. Manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties, eliminating the need for metal fasteners that can corrode and fail. |
| SKU | A-AST-1000-1 |
| Part Number | A-AST-1000-1 |
| Mfr. Part Number | AST-1000-1 |
| Capacity (Gallons) | 1000 |
| Dimensions | 101″L x 60″W x 60″H |
| Weight (lbs) | 441 |
| Material | Polyethylene |
| Manufacturer | Ace Roto-Mold / Den-Hartog |
| Availability | In Stock |
| Technical DrawingsGuides | |
|---|---|
| Technical Drawings | View Technical Drawing |
| Shipping From | IA |
| Freight Class | 300 |
| Shipping Length | 101 |
| Shipping Width | 60 |
| Shipping Height | 60 |
| Shipping Weight (lbs) | 441 |
1000 Gallon 1 Compartment Plastic Septic Tank (Preplumbed)
The following items are included in the 1 compartment septic tank: Septic tanks manufactured by Norwesco are one-piece construction, which eliminates the need for further assembly and so reduces installation time and labor.
- Rugged, one-piece tank that is rotationally molded and does not have any seams to leak
- During the installation process, there is no need for any specific backfill or water filling. During pump-outs, it is possible to pump the water out completely. It is possible to install with 6″ to 36″ of cover
- A septic tank or pump tank that can also be used for non-potable water is suitable for this use. Openings and lids for access are compatible with Norwesco manhole extensions, double-wall corrugated pipe, and ribbed PVC pipe.
Disclaimer: This tank is intended for usage below ground only.
State RequirementsApprovals
The tank is exclusively intended for usage below ground.
Installation Video: (This tank already had plumbing installed when tank arrives)
- If you ask the question, no, you cannot place the plastic septic tank beneath a driveway since it is not authorized, and doing so will invalidate the guarantee. Keep tanks out of the line of heavy and vehicle traffic regions, and don’t put them beneath driveways. It is advised that bedding/backfill be made up of an equal mixture of sand and gravel (often known as “pea gravel”). 2. Is it necessary to mix the sand and gravel? 3. Is it possible to utilize a septic tank above ground? Underground plastic septic tanks are intended for use solely below ground. They are not intended for above ground usage. The use of above-ground storage tanks may result in the tank’s distortion and degradation. When compared to underground storage tanks, it is significantly more cost-effective to employ an above-ground storage tank that has been particularly constructed for above-ground uses. Is it possible to keep hot water in plastic septic tanks? Yes, but only if the water temperature is not greater than 100 degrees Fahrenheit
- Polyethylene storage tanks have a maximum storage temperature of 120 degrees Fahrenheit. Containments with a temperature greater than 120 degrees Fahrenheit, even for a short period of time, might degrade the structural integrity of the tank and making it more prone to deformation and collapse
- What is the best method of accessing an underground plastic septic tank? Each underground plastic septic tank is supplied with a manhole access hatch. Additionally, risers can be placed to the top of the tank to provide for access from the ground level. A riser would save you from having to dig up the dirt above the manway in order to get access
- Otherwise, 6. Is it possible to pick up a plastic septic tank in the area? In most circumstances, yes. You must place an order in advance in order to pick up a plastic septic tank and save money on shipping. When you are notified that your tank is ready for pickup, Plastic-mart will issue you with a six-digit trip number that will allow you to go and pick up your tank Monday through Friday from 8:30 a.m. to 2:30 p.m. Likewise, Plastic-mart and the local producers are grateful for the chance to supply local pick as well as the collaboration necessary to ensure that the process runs well.
What Are The Dimensions Of 1000 Gallon Septic Tank?
Disclosure: This post contains affiliate links, which means that if you purchase a product after clicking on one of our links, we may receive a commission or free product from the firms featured in this post. Amazon is a good illustration of this. Knowing the physical dimensions of a septic tank, which is designed to store a capacity of 1000 gallons of wastewater, is important for a variety of reasons. When a septic tank is in need of repair or cleaning by specialists, it is critical to know the size of the tank in question.
- So, what are the measurements of a 1000-gallon septic tank?
- The dimensions of a low-profile tank are 120″ L x 67″ W x 57″ H.
- To learn why an aseptic tank should not be too deep or too shallow, continue reading this article.
- Dimensions of a septic tank
CALL 1.855.925.0760 FOR A LOCAL SEPTIC QUOTE
If you are considering having a septic tank placed, you should be aware of the many types of tanks that are often utilized in residential settings. These are the ones:
- Concrete tanks, plastic or polyethylene tanks, fiberglass tanks, and other types of tanks are available.
A septic tank with a capacity of 1000 gallons may have modest differences in size based on the kind of tank being installed (whether it is a fiberglass tank, plastic tank or concrete tank). As a result, it is necessary to have a basic awareness of the kind of septic tank in order to comprehend the dimension elements involved.
CALL 1.855.925.0760 FOR A LOCAL SEPTIC PUMPING QUOTE
There are a lot of elements that influence the size of any septic system that you may require in your home. The system’s dimensions are determined by the size or capacity of the tank, as well as the type of tank used in it (as mentioned above). Consequently, the size of a septic tank is determined by the square footage of the land. It is dependent on the number of bedrooms in the house as well as the overall number of people that live in the residence. Here are some statistics about the size and dimensions of a septic tank to help you understand them better:
| Type of Tank | Tank Capacity | Tank Length (inches) | Tank Width(inches) | Tank Height(inches) |
| Concrete Septic Tank | 1000 Gallon – Heavy Duty | 96 | 78 | 61 |
| 1000 Gallon – Low Profile | 120 | 67 | 57 | |
| Plastic or Fibreglass Septic Tank | 1050 Gallon | 126 | 60 | 51 |
| Steel Septic Tank | 1000 Gallon | 58 | 58 | 96 |
Understanding Septic Tank Sizes
A septic tank on any property is the initial point of contact for wastewater that is discharged from a dwelling. This effluent then remains in the septic tank for an extended period of time. Several processes are taking on inside the tank during this time period, which are detailed below. Solids are separated from liquids during this step of the process. Once this is completed, the particulates are filtered out and the remaining water is allowed to run away through the drainage field.
The size or dimensions of the septic tank, on the other hand, are critical in order for all of this to occur properly. When specialists build a septic tank, they take into consideration a number of critical factors. Among these considerations are:
- The total number of square feet of the property
- There are several bedrooms in the house. There will be a certain number of individuals that will use the property. The frequency with which guests arrive
- The frequency with which major meetings, parties, or get-togethers are held
When homeowners seek the assistance of professionals, things become much simpler. When installing a septic tank, professionals take into account all factors and guarantee that the tank is the appropriate size and proportions. It should also be mentioned that if there are additional users, the capacity of the tank should be increased by 180 litres for each extra user.
In Case the Septic Tank is Smaller – What Happens?
The tank’s dimensions are determined by the size of the tank. Multiple issues will develop if the septic tank is too small and insufficient in capacity. Because of the volume of wastewater that will be generated on the site, it will be unable to cope. The possibility of all kinds of unpleasant situations arises if the septic tank is smaller than the appropriate size. This can manifest itself in a variety of ways, including offensive and stinky odors, overflowing tanks, and obstructions. The most serious issue that might develop as a result of a tiny tank’s capacity is that the resulting pressure can cause liquids to escape before they have had a chance to be completely filtered out.
As a result, they will continue to accumulate in the septic tank.
CALL 1.855.925.0760 FOR A LOCAL SEPTIC QUOTE
In the same way that a septic tank that is too small can cause multiple difficulties, a septic tank that is too huge can cause several problems. A tank that is too large will not perform properly. The effluent will not be able to pass through it efficiently. For example, if you have an overly big septic tank, there may not be enough liquid accumulation, which might lead to an excessive buildup of germs. Because the processing will not take place organically if this occurs, the solids in the tank will not break down adequately as a result of this.
This will ensure that everyone’s health and full hygiene are protected.
Considering the Features of Your House to Determine the Septic Tank SizeDimensions
The requirements of the family must be taken into consideration first and foremost when a homeowner considers the construction of a septic tank. There are various aspects of a home that must be considered while designing it. When purchasing a home, keep the following in mind:
- More than one dishwasher
- More than one kitchen
- More than one bathroom
- Showers with waterfalls
- Low-flow devices
- A hot tub, a swimming pool, and an indoor spa are available.
All of these items are regarded to be nice elements in any home and should be included. In addition, because of the increased water flow, these luxury features will raise the demand for a septic tank with a greater specified size because of the increased water flow. Because of the increased demand for water, it is possible that the tank may need to be larger.
CALL 1.855.925.0760 FOR A LOCAL SEPTIC QUOTE
- Approximately how many bedrooms can be supported by a 1000-gallon septic tank
A 1000-gallon septic tank has the capacity to support a three-bedroom house. The property should have a maximum square footage of 2500 square feet. For further information, please see this page. No, you should never drive over a septic tank with a capacity of 1000 gallons.
In the event that you drive over the tank, damage to the pipes and leach field will occur. If the damage is extensive, the septic tank will malfunction, resulting in costly repairs to the system.
- The frequency at which you should pump a 1000-gallon septic tank
The average septic tank holds 1000 gallons and may be pumped once every five years if it is utilized by two persons. If, on the other hand, the same tank is utilized by eight people, it should be pumped out once a year. More information about septic tank pumping may be found by clicking here.
- The average septic tank holds 1000 gallons and may be pumped once every five years if it is only used by two people. A year’s worth of pumping should be performed on a tank that is shared by 8 persons. Septic tank pumping is discussed in further detail here.
It will require two lids due to the size of the container. When cleaning or pumping the tank, two lids will provide you simple access to the whole tank. Because it is so enormous, it will require two lids. When cleaning or pumping, two lids will allow you to easily access the whole tank.
- In order to pump a 1000-gallon septic tank, how much will I have to pay?
In order to pump a tank with such a capacity, a user may be required to spend anywhere between $225 and $400, depending on the circumstances. More information about septic tank pumping expenses may be found here. The usefulness and functionality of a septic tank are greatly influenced by the size of the tank. As a result, only professionals can assess the size of a septic tank after taking into account a variety of elements. More information may be found at:1000 Gallon Septic Tank Owners Guide.
CALL 1.855.925.0760 FOR A LOCAL SEPTICQUOTE
- Household wastewater treatment, on-site sewage treatment, residential applications, light commercial hotels, schools, and neighborhood applications, and more are available.
Notes
- All images and drawings are for illustrative purposes only and may not always depict the exact product being advertised. It is possible for dimensions on polyethylene tanks to differ by +/-3 percent (typical rotational molding tolerance). It is recommended that venting systems be sized to provide for a maximum pressure or vacuum of 1/2″ water column (0.018 PSI) in polyethylene water tanks when used for water storage exclusively at atmospheric pressure. The tank is composed of BPA-free and FDA-approved materials. The resin is produced in NSF-certified manufacturing facilities. The tank must be installed and used in accordance with the manufacturer’s instructions for usage and installation in order for the warranty to be valid. According to the tank manufacturer’s guidelines, flexible connectors must be used on all fitting connections.
- BPA-free and FDA-compliant
- High-quality and long-lasting construction
- 3-Year Manufacturer’s Warranty
- Currently in stock and available for purchase
$1,590.00 in U.S. dollars Prices on all items displayed on our website are subject to change as a result of resin price changes that are beyond our control. Please contact our office to obtain verified price or to be placed on our waitlist for future availability (866-969-9404). Shipping and Handling Information
| Ships From | CA, NE, AR, WV, GA |
|---|---|
| Shipping Cost | Call 866-959-7593 for Shipping Quote |
Description
Septic tank with a single compartment made of HDPE. High-quality storage capacities are achieved via the use of state-of-the-art one-piece seamless construction. 1000 Gallon Single Compartment Schematic Illustration
| Capacity | 1000 |
|---|---|
| Length | 127″ |
| Width | 60″ |
| Height | 51″ |
| Material | High Density Polyethylene (HDPE) |
| Weight | 250 |
| Inlet | 3″ Pre Drilled hole with Septic T and Gasket |
| Outlet | 3″ Pre Drilled hole with Septic T and Gasket |
| Lid Size/type | (X2) 20″ NexGen D2 Lid and Gasket |
| Specific Gravity | 1.0 (Septic use only) |
| Manufacture | Snyder |
Additional Information
Ace Septic TanksAce Roto-Mold septic tanks are stronger, easier to install, and less costly than old-fashioned concrete septic tanks- yet they still offer the quality construction and safety you expect. Manufactured from high-density polyethylene with U.V. inhibitors, Ace Roto-Mold tanks utilize a horizontal flow designed for below ground installations up to 36 inches. Ace Tanks are IAPMO approved and have passed strenuous stress tests. Each tank carries an individual serial code and is fully document from date of manufacture.Ace Roto-Mold septic tanks are designed and manufactured with rigorous quality controls. The trapezoidal deep-rib design and interior baffle system make Ace Tanks the industry choice. Only Ace tanks feature a custom-molded gasket in the lid. Manufactured from extruded Nitrile rubber, the gasket snaps into the lid and ensures a watertight seal. Our exclusive lid design locks in place with nylon ties, eliminating the need for metal fasteners that can corrode and fail.Ace’s unique tank baffle system slows the flow of wastewater and directs it to the middle of the tank so wastewater can separate from solids. An outlet baffles allows the partially treated liquids to flow out for further treatment. Advantages of Ace’s baffle design include added strength, versatility, and ease of installation.Septic tanks are available in one-compartment and two-compartment designs and are manufactured for containment of liquids up to 1.7 specific gravity.Ace Septic / Cistern Tank AccessoriesRemember to order your state specific internal plumbing kit. Links:Septic Tank Product Description, Function and ServiceSeptic Tank Installation ProceduresSpherical Septic Tank Installation ProceduresSeptic Tank Divider Installation Procedures
| Norwesco Septic Tanks300 + 500 Gallon Spheres may be used as Septic Holding Tanks (Pump Out).SeeUnderground Water Tanksfor others availablefor Septic Holding Tanks.The world’s leading manufacturer of polyethylene tanks, NORWESCO has been producing polyethylene septic tanks since 1980. With that kind of experience, NORWESCO offers you proven products that you can count on for years of dependable, trouble-free service.For septic system replacement and new home construction, NORWESCO‘s polyethylene septic tanks are designed for durability and quick, easy installation. Any NORWESCO septic tank can be transported to the job site in a pickup truck and carried by just two people. That enables you to install the tank on your schedule.All NORWESCO septic tanks are manufactured by means of the rotational molding process, which produces a one-piece, seamless, watertight tank. Polyethylene is unaffected by soil chemicals and by the chemicals and gases present in sewage, so NORWESCO septic tanks will not rust or corrode and require no additional coatings as other tanks do. NORWESCO’s strict quality guidelines ensure an environmentally safe septic tank.NORWESCO septic tanks come equipped with manhole covers and detailed installation procedures. Manhole extensions and lid/riser combinations are available to bring tank access to grade and to meet code specifications. The 750, 1000, 1250 and 1500 gallon sizes are available in both one and two compartment configurations.NORWESCO septic tanks are for BELOW GROUND USE ONLY. Using the tanks above ground may result in deformation of the tank. It is far more cost-effective to utilize one of NORWESCO’s above ground tanks that are specifically designed for above ground use and applications.The tanks described and shown on this page cannot be used as pump tanks and must be kept full at all times.PRE-PLUMBING: All of our NORWESCO septic tanks that are 750 working gallons andabove are “pre-plumbed” with PVC inlet and outlet assemblies. Assemblies andtheir components are made of either SDR35 or SCH40 PVC depending on state orlocal code requirements. All assemblies are sized according to code requirementsas well. Finally, an EPDM gasket is placed between the “T” assembly and thetank wall to assure watertightness. NORWESCO septic tanks will arrive to youready for installation.WATERTIGHT DOMED LIDS: All septic tanks manufactured at all facilities, are equipped with a watertight domed lid. This domed lid is significantly stronger than previous lids we have offered. When leaving our factory, the lid(s) will be attached to the tank with stainless steel screws and come standard with a foamed, polyethylene gasket between the lid and the tank. This gasket provides a watertight seal at the lid area.MANHOLE EXTENSIONS AND LID/RISER COMBINATIONS: Again, at all facilities, the notches in the manhole area(s) of the tank have been removed as the “interruption” in the manhole, or circle, weakens that area. The lugs on the accessories have also been removed. See tank accessories for more information on the accessory items.NORWESCO septic tanks are backed by a full three-year warranty and have been certified by state and local health departments from coast to coast. Where applicable, NORWESCO septic tanks have been certified by both IAPMO and CSA.Across the United States and Canada, there are certain health code requirements that our tanks must meet. These codes are regulated by the state, county or province.Click here for Septic Tanks in HawaiiTank Depot Tanks Light Weight – Durable – Easy to Install |
What is the size of a thousand gallon septic tank?
| Table of ConcreteSeptic TankOutsideDimensions,Capacity,Other Data | ||
|---|---|---|
| Rectangular ConcreteSeptic Tank Size(Gallons Capacity) | Tank Length(Inches) | Tank Width(Inches) |
| 1000heavy duty | 96 | 78 |
| 1000low profile | 120 | 67 |
| 1000/600 | 145 in. | 68 in. |
Septic tank made of HDPE with a single compartment capacity of 1000gal. High-quality storage capacities are provided by using state-of-the-art one-piece seamless construction. 1100 Gallon Single Compartment Schematic Diagram
| Name | Capacity |
|---|---|
| 750 Gallon Septic Tank – 1 Compartment / 2 Manholes | 750 Gallons |
| 750 Gallon One Compartment Plastic Septic Tank | 750 Gallons |
| 750 Gallon 1 Compartment Plastic Septic Tank (Loose Plumbing) | 750 Gallons |
| 750 Gallon 1 Compartment NexGen Septic Tank (Loose Plumbing) | 750 Gallons |
1000 Gallon Plastic Septic Tank Norwesco 42406
Important Note: At this time, the 48-hour immediate shipping offer is only available for orders placed from Oklahoma. Please contact us to inquire about the availability of other locations. The following items are included in the 2-compartment septic tank: Norwesco low profile septic tanks are constructed of a single piece of plastic. There is no extra assembly required. minimizing the amount of time and effort spent on installation
- Rugged since it was rotationally manufactured. a one-piece tank with no seams where water might seep
- During the installation process, there is no need for any specific backfill or water filling. During pump-outs, it is possible to pump the water out completely. It is possible to install with 6″ to 36″ of cover
- A septic tank or pump tank that can also be used for non-potable water is suitable for this use. Norwesco manhole extensions are compatible with access apertures and lids. double-wall corrugated pipe and ribbed PVC pipe are examples of such materials.
Disclaimer: This tank is intended for usage below ground only.
State RequirementsApprovals
Our tanks must comply with a variety of health code standards that are in place across the United States. Depending on where you live, these codes are governed by your state or county. Please speak with your local health agency if you need assistance determining which tank you will require.
Installation Video: (This tank already had plumbing installed when tank arrives)
- 1. Is it possible to place a septic tank beneath a driveway? No, placing a plastic septic tank beneath a driveway is not authorized and will invalidate the manufacturer’s guarantee. Keep tanks out of the line of heavy and vehicle traffic regions, and don’t put them beneath driveways. 2. Is a sand/gravel combination suggested for bedding/backfill? Yes, a sand/gravel mixture is recommended for bedding/backfill. A combination typically referred to as “pea gravel” is advised
- 3. Is it possible to utilize a septic tank above ground? Underground plastic septic tanks are intended for use solely below ground. They are not intended for above ground usage. The use of above-ground storage tanks may result in the tank’s distortion and degradation. When compared to underground storage tanks, it is significantly more cost-effective to employ an above-ground storage tank that has been particularly constructed for above-ground uses. 4. Can hot water be held in plastic septic tanks? Yes, but only if the water temperature in the tank does not exceed 100 degrees Fahrenheit. The maximum storage temperature for polyethylene storage tanks is 120 degrees Fahrenheit. Contents that have been exposed to temperatures in excess of 120 degrees Fahrenheit, even for a brief period of time. can cause structural integrity of the tank to be compromised, making it more prone to deformation and collapse
- What is the best method of accessing an underground plastic septic tank? Each underground plastic septic tank is supplied with a manhole access hatch. Additionally, risers can be placed to the top of the tank to provide for access from the ground level. In the absence of a riser, you would be required to dig up the earth above the manway to get access
- 6. Is it possible to pick up a plastic septic tank nearby? In many circumstances, this is possible. To save money on freight by picking up a polyethylene septic tank. It is necessary for you to place your order. When you receive notification that your tank is available for pickup. Plastic-mart will offer you with a six-digit trip number that will allow you to visit them and pick up your tank Monday through Friday from 8:30 a.m. to 2:30 p.m. Likewise, Plastic-mart and the local producers are grateful for the chance to supply local pick as well as the collaboration necessary to ensure that the process runs well.
What size of septic tank do I need?
Probably one of the last things on your mind when you are constructing a new house is the location of your septic system.
After all, shopping for tanks isn’t nearly as entertaining as shopping for cabinetry, appliances, and floor coverings. Although you would never brag about it, your guests will be aware if you do not have the proper septic tank placed in your home or business.
septic tanks for new home construction
The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size. Of course, all of this is dependent on the number of people who live in the house as well as the amount of water and waste that will be disposed of through the plumbing system.
For the most accurate assessment of your septic tank needs, you should speak with an experienced and trustworthy sewer business representative.
planning your drainfield
Here are some helpful hints for deciding where to locate your drainfield when you’re designing it.
- Vehicles should not be allowed on or around the drainfield. Planting trees or anything else with deep roots along the bed of the drain field is not recommended. The roots jam the pipes on a regular basis. Downspouts and sump pumps should not be discharged into the septic system. Do not tamper with or change natural drainage features without first researching and evaluating the consequences of your actions on the drainage field. Do not construct extensions on top of the drain field or cover it with concrete, asphalt, or other materials. Create easy access to your septic tank cover by placing it near the entrance. Easy maintenance and inspection are made possible as a result. To aid with evaporation and erosion prevention, plant grass in the area.
a home addition may mean a new septic tank
Do not make any big additions or renovations to your house or company until you have had the size of your septic system assessed. If you want to build a house addition that is more than 10% of your total floor space, increases the number of rooms, or necessitates the installation of new plumbing, you will almost certainly need to expand your septic tank.
- For a home addition that will result in increased use of your septic system, your local health department will require a letter from you that has been signed and authorized by a representative of your local health department confirming that your new septic system is capable of accommodating the increase in wastewater. It is not recommended that you replace your septic system without the assistance of a certified and competent contractor.
how to maintain your new septic system
For a home addition that will result in increased use of your septic system, your local health department will require a letter from you that has been signed and authorized by a representative of your local health department confirming that your new septic system is capable of accommodating the increased wastewater. It is not recommended that you replace your septic system without the assistance of a certified and qualified expert.
- Make use of the services of a qualified specialist to develop a maintenance strategy. Make an appointment for an annual examination of your septic system. Utilize the services of an effluent filter to limit the amount of particles that exit the tank, so extending the life of your septic system. Waste items should be disposed of properly, and energy-efficient appliances should be used. Make sure you get your septic system professionally cleaned every 2 to 3 years, or more frequently if necessary, by an experienced and qualified expert
- If you have any reason to believe that there is an issue with your system, contact a professional. It is far preferable to catch anything early than than pay the price later. Maintain a record of all septic system repairs, inspections, and other activities
common septic questions
Here are some of the most frequently asked questions by our septic customers.
How do I determine the size of my septic tank?
If you have a rectangular tank, multiply the inner height by the length to get the overall height of the tank. In order to find out how many gallons your septic tank contains, divide the number by.1337.1337
How many bedrooms does a 500-gallon septic tank support?
The exact size of the septic tank is determined mostly by the square footage of the house and the number of people who will be living in it. The majority of home septic tanks have capacities ranging from 750 to 1,250 gallons. A 1000 gallon tank will most likely be required for a typical 3-bedroom home that is smaller than 2500 square feet in size.
How deep in the ground is a septic tank?
This is mostly determined by the square footage of the house and the number of people that will be living in it, as well as other factors. A typical household septic tank holds between 750 and 1,250 gallons of water. Typically, a 1000 gallon tank will be required for a three-bedroom home that is less than 2500 square feet in size.
Septic Tank: Size Matters
Septic systems are not the sort of system that is “one size fits all.” Even if one size tank may be sufficient for one home, this does not imply that it will be sufficient for all households.
Talking with a plumbing and septic tank specialist will be your best bet for ensuring that you purchase the proper size tank for your needs. This article will provide you with the fundamental knowledge you need to get started on your home repair and plumbing projects.
Things to consider
The following factors should be taken into consideration when selecting the amount of septic tank that your property requires; for example,
- The square footage of the property in question
- What is the number of rooms in the house
- Who will be residing in the house
- How many people will be living in the house
Septic tanks are typically available in sizes ranging from 750 gallons to 1,250 gallons in capacity. We need some background information before we can get into the meat of the discussion.
What is a Septic Tank?
Septic tanks are self-contained, subterranean chambers or containers that are meant to retain wastewater generated by a home or other building. Generally speaking, septic systems are composed of two major components: the tank and the drain field. As soon as the wastewater exits your home, it will begin to flow into the holding tank. Solid waste will settle to the bottom of the tank, forming a “sludge” layer on the bottom of the tank. Other liquids, such as oil and grease soap residue, will float to the surface, forming the “scum” layer on the surface.
Eventually, when the tank fills, the effluent drains from the tank and onto the drain field, where it is absorbed by the earth.
Are there Different Types of Septic Tanks?
That’s an excellent question! Yes, several sorts of materials are used to construct your septic tank by the manufacturer. When it comes to placing the tank, it all comes down to personal style, affordability, and maneuverability. Let us have a look at the many sorts of tanks that are most typically encountered:
Concrete Septic Tanks
Designed to endure several decades, these tanks are one of the most robust solutions available for your household plumbing requirements. However, because they are the heaviest of the materials, their upkeep and installation will almost certainly be more expensive. Another thing to keep in mind is that they are prone to cracking, which can result in wastewater spilling into the surrounding ground and potentially polluting drinking water.
Plastic Septic Tanks
These tanks are built to survive for several decades, making them one of the most long-lasting solutions available for your household plumbing requirements. Their installation and upkeep will, however, be more expensive due to the fact that they are the heaviest of the available materials. Another thing to keep in mind is that they are prone to cracking, which can result in wastewater spilling into the surrounding ground and potentially polluting drinking water supplies.
Fiberglass Septic Tanks
This sort of tank is more robust than plastic since it is less likely to flex or shift when it is placed in a stable location. Additionally, they are more cost-effective than concrete septic tanks because to their lightweight and noncorrosive nature both within and outside the tank. Unlike plastic or concrete tanks, they are also less prone to suffer structural damage than those materials.
Steel Septic Tanks
These tanks are becoming increasingly rare, but it doesn’t rule out the possibility of seeing one in the future. Steel is the least expensive of the materials used in septic tanks, but it does so at the expense of durability.
Despite the fact that they are intended to endure between 20 and 25 years, they frequently rust before they have reached their entire lifespan. Now that we’ve covered the essential background material, let’s move on to the actual subject at hand.
What Size Septic Tank Do You Need?
- Home with fewer than 1.500 square feet = 750-gallon tank
- Home with fewer than 2,500 square feet = 1,000-gallon tank
- Home with fewer than 3,500 square feet = 1,250-gallon tank
- Home with fewer than 4,500 square feet = 1,250-gallon tank
- And home with fewer than 5,500 square feet = 1,315-gallon tank
- Home with fewer than 2,500 square feet = 1,315-gallon tank
Conclusion
Keep in mind that the information provided above is only a preliminary approximation. The actual size of the tank you want will be determined by a combination of the criteria listed above as well as the regulations of your local jurisdiction. Talking to a professional plumber and septic system installation is your best choice for ensuring that you are not only complying with local standards, but that you are also getting the “most bang for your buck.” Back-ups or the need for more frequent pumping and maintenance may result if you choose the incorrect size septic tank or if you have too many people living in a home with a smaller septic tank.
If you choose the incorrect size septic tank or have too many people living in a home with a smaller septic tank If you’re ready to become a member of the septic tank family, get in touch with us right away!
Please contact us for more information.
1000 Gallon Plastic Septic Tank – Double Compartment – Low Profile – 2MH – GT – NC/SC
In addition, because Norwesco Low Profile septic tanks are molded in one piece, there is no further assembly required, which reduces installation time and labor. Other characteristics are as follows: ? Tank made of rotationally molded, one-piece polyethylene with no seams to allow for leakage. Because there is no assembly necessary, installation time and effort are reduced. During the installation process, there is no special backfill or water filling required. During pump-outs, it is possible to pump the water out completely.
A septic tank or pump tank that can also be used for non-potable water is suitable for this application.?
Tanks can be ordered with PVC tees and gaskets that are delivered in a loose state.?
These codes are governed by the laws of the state, county, or province in which you reside.
Septic Tanks
We are currently in the process of uploading our items on the site, so bear with us. If you don’t find what you’re searching for, please get in touch with us for more assistance. Items 1-19 out of 19 are shown (s) Items 1-19 out of 19 are shown (s)
- Classification:Septic Tanks
- Uses:Residential
- Classification:H-10, Old Style
- Type:Concrete Septic Tank
- Capacity:1000 gallon
- Weight:12,025 lbs
- Capacity:1000 gallons
- Exterior Dimensions:49″ H x 6’4″ W x 10’5″ L
- Invert Out:34″
- Weight:12,025 lbs
- Classification:Septic Tanks
- Uses:Residential, Shallow Bury
- Style:New Style
- Type:Concrete, Septic Tank
- Capacity:1000 gallon
- It has a weight of 11,750 pounds and a capacity of 1000 gallons. Its exterior dimensions are 49 inches high by 6 feet four inches wide by 10 feet five inches long
- The invert out is 34 inches.
- Commercial, residential, and shallow burial applications are included under the category of Septic Tanks. The H-20 classification is applied to concrete, septic tanks of up to 1000 gallons in capacity.
- Approximately 23,000 pounds
- 1,000-gallon capacity
- Exterior dimensions: 49″ H x 6′-10″ W x 12′-10″ L
- Invert out: 29 1/2″
- Interior dimensions: 49″ H x 6′-10″ W x 12′-10″ L
- Classification:Septic Systems
- Application:Residential
- Classification:H-10, Old Style
- Type:Concrete, Septic Tank
- Capacity:1000 gallon
- Axle weight:9,590 pounds
- Tank capacity:1,000 gallons
- Exterior dimensions (in inches): 64 inches high by 5 feet 4 inches wide by 8 feet 0 inches long
- Invert out measurement: 51 1/2 inches.
- Axle weight:9,590 pounds
- Tank capacity:1,000 gallons
- Exterior dimensions (in inches): 64 inches high by 5 feet 4 inches wide by 8 feet 0 inches long
- Invert out measurement: 51 1/2 inches
- Axle weight:9,590 pounds
- Tank capacity:1,000 gallons
- Exterior dimensions (in inches): 64 inches high by 5 feet 4 inches wide by 8 feet 0 inches long
- Invert out distance:51 1/2″
- Septic tanks are classified as follows: Commercial and residential uses are possible. Class:H-20
- Septic tank (also known as a septic tank). The capacity is 1000 gallons.
- 67 inches high, 5 feet wide, and 8 feet long
- Invert Out: 51 1/2″
- Weight: 10,757 pounds
- Capacity: 1,000 gallons
- Exterior Dimensions: 67 inches high, 5 feet four inches wide, and 8 feet zero inches long
- Septic tanks are classified as follows: Category:Septic Tanks
- Use:Commercial, Residential
- Class:H-20
- Type:Septic Tank
- Size:1500 gallon
- Weight:23,750 lbs
- Capacity:1,500 gallons
- Interior Dimensions: 46″ H x 6′-0″ W x 12′-0″ L
- Weight:23,750 lbs
- Exterior Dimensions: 61.5″ H x 6′-10″ W x 12′-10″ L
- Invert Out: 42″
- Interior Dimensions: 61.5″ H x 6′-10″ W x 12′-10″ L
- The system is classified as follows: Category:Septic Systems
- Use:Residential
- Class:H-10
- Type:Septic Tank
- Size:1500 gallon
- It has a weight of 13,782 pounds and a capacity of 1,500 gallons. Its outside dimensions are 64 inches high by 6 feet four inches wide by 10 feet six inches long.
- A new style septic tank in the category of septic systems, with a capacity of 1500 gallons and an intended use of residential.
- It has a weight of 13,782 pounds and a capacity of 1,500 gallons. Its outside dimensions are 64 inches high by 6 feet four inches wide by 10 feet six inches long.
- Commercial and residential septic tanks are included in this category. Class H-20 septic tanks are included in this category as well.
- Weight: 25,025 pounds
- Capacity: 2,000 gallons
- Interior Dimensions: 52.5 inches “6′-0″ high by 6′-0″ wide by 12′-0” long
- Exterior Dimensions: 68″ high by 6’10” wide by 12’10” deep “L
- L
- Dimensions: 52.5″ in length, 25.25″ in width, and 2,000 gallon capacity “Measurement in feet: 6′-0″ high x 12 feet-0″ wide x 12 feet-0 long 68″ in height, 6′-10″ wide, and 12′-10” deep on the outside “the letter “L,” and the number “L.”
- It has a weight of 16,552 pounds and a capacity of 2,000 gallons. Its exterior dimensions are: 74 inches high by 6 feet four inches wide by 10 feet six inches long
- The invert out is 60 inches.
- Septic tanks are classified as follows: Category:Septic Tanks
- Use:Commercial, Residential
- Class:New Style
- Type:Septic Tank
- Size:2000 gallon
- It has a weight of 16,280 pounds and a storage capacity of 2,000 gallons. Its exterior dimensions are 74 inches high by 6 feet four inches wide by 10 feet six inches long
- The invert out is 60 inches.
- Classification:Septic Tanks
- Uses:Residential
- Classification:H-10, Old Style
- Type:Concrete Septic Tank
- Capacity:700 gal.
- Dimensions: 26 1/2″ H x 6 ‘4″ W x 10’ 6″ L
- Invert Out: 29 1/2″
- Capacity: 700 gallons
- Exterior Dimensions: 26 1/2″ H x 6 ‘4″ W x 10’ 6″ L
- Exterior Dimensions: 26 1/2″ H x 10′ 6″ L
- Category:Septic Tanks
- Use:Residential
- Class:New Style
- Type:Concrete
- Size:700 gallon
- 10235 lbs
- 700 gallons
- Exterior dimensions: 26 1/2″ H x 6’4″ W x 10’6″ L
- Invert out: 29 1/2″
- Weight 10235 lbs
- Capacity 700 gallons
- Residential Shallow Bury Septic Tank, Class H-10, Old Style, Concrete, Septic Tank, Size 750 gal.
- 8 315 lbs
- Capacity: 750 gallons
- Exterior dimensions: 49″ H x 5’4″ W x 8’0″ L
- Invert out: 36 1/2″
- Overall weight: 8 315 lbs
- Classification:Septic Tanks
- Uses:Residential, Shallow Bury
- Style:New Style
- Type:Concrete, Septic Tank
- Capacity:750 gal.
- Weight:8,095 lbs
- Capacity:750 gallons
- Exterior Dimensions: 49″ H x 5’4″ W x 8’0″ L
- Invert Out:36 1/2″
- Overall Dimensions:49″ H x 5’4″ W x 8’0″ L
- Overall Dimensions:49″ H x 8’0″ L
- Categorie:Septic Tanks
- Application:Residential
- Class:H-20
- Type:Concrete Septic Tank
- Size:750 gallon
- 8 740 pounds
- Capacity: 750 gallons
- Outside dimensions: 52″ H x 5’4″ W x 8’0″ L
- Invert out: 36 1/2″
- Overall weight: 8 740 lbs
- Categorization:Septic Systems
- Application:Residential
- Material:Plastic
- Type:Septic Tank
- Capacity:1000 gal.
- Categorization:Septic Systems
- Application:Residential
- Material:Plastic
- Type:Septic Tank
- Capacity:1000 gallon
- Classification:Septic Systems
- Uses:Residential
- Classification:Plastic
- Type:Septic Tank
- Capacity:500 gallon
Underground Septic Holding Tanks
Protankprovides the highest-quality polyethylene plastic below-ground storage tanks available on the market today, including: Below-ground septic tanks are available in capacities ranging from 200 to 1500 gallons. Our plastic septic tanks are built to last and are intended for quick and simple installation. In addition, because our plastic septic tanks are composed of polyethylene, they are resistant to soil chemicals as well as to the chemicals and gases contained in sewage, which means that our plastic septic tanks will not rust or corrosion.
We also provide pre-plumbed septic tanks, which are pre-plumbed in accordance with state regulations.
Tanks that have been PRE-PLUMBED are sent to you ready to be installed.
Tees are measured and cut to meet the requirements of each state code, ensuring that the tank you get is ready for installation.
If you want assistance in selecting the most appropriate septic tank for your needs, our sales staff would be happy to assist you. All of our polyethylene plastic tanks are available with drawings and specs from our experts.
Septic Tanks
Listed below is a list of the septic tanks, chlorine contact tanks, and siphon dose tank packages thatCamden Supplyoffers, along with detailed descriptions of their features and specifications. Please call Camden Supply and chat with one of our staff if you require further information on a certain product.
Single Compartment Septic Tanks
A one-compartment steel-reinforced concrete septic tank, according to the script. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:
- Overall height is 56 inches
- Overall length is 79 inches
- Overall width is 48 inches
- Height to center line of inlet is 48 inches
- Height to center line of outflow is 45 inches
- Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.
600 Gallon Single Septic Tank
Specifications:
- Overall height is 62 inches
- Overall length is 79 inches
- Overall width is 48 inches
- Height to center line of inlet is 52 inches
- Height to center line of outflow is 49 inches
- Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.
1000 Gallon Single Septic Tank
Septic tank with a single compartment made of steel reinforced concrete (SRC). Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:
- Overall height is 60 inches
- Overall length is 96 inches
- Overall width is 67 inches
- Height to center line of inlet is 52 inches
- Height to center line of exit is 49 inches
- Weight is 8,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.
1250 Gallon Single Septic Tank
A one-compartment steel-reinforced concrete septic tank with the lower portion cast as a single piece so that there are no seams that come into touch with effluent. Specifications:
- This is a one-chamber steel reinforced concrete septic tank with the lower section cast as a single piece so that there are no seams in contact with the effluent. Specifications:
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psiApplications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.
1500 Gallon Single Septic Tank
Specifications:
- Overall height is 60 inches
- Overall length is 150 inches
- Overall width is 67 inches
- Height to center line of inlet is 52 inches
- Height to center line of exit is 49 inches
- Weight is 11,700 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.
25003500Gallon Single Septic Holding Tanks
Single Septic Holding Tank with a capacity of 2500 gallonsSpecifications:
- Overall height is 68 inches
- Overall length is 144 inches
- Overall width is 78 inches
- Height to center line of intake is 61 inches
- Height to center line of outflow is 61 inches
- Weight is 16,000 pounds.
Single Septic Holding Tank with 35 00 Gallon CapacitySpecifications:
- Overall height is 98 inches
- Overall length is 144 inches
- Overall width is 78 inches
- Height to center line of intake is 91 inches
- Height to center line of exit is 91 inches
- Weight is 20,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.
Dual Compartment Septic Tanks
Description:Two-compartment tank with solids separator between the first and second compartments, holding 500 gallons and 500 gallons, respectively. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:
- Overall height is 60 inches
- Overall length is 96 inches
- Overall width is 67 inches
- Height to center line of inlet is 52 inches
- Height to center line of exit is 49 inches
- Weight is 10,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.
1250 Gallon Dual Septic Tank
Description:Two-compartment tank with a solids separator between the first and second compartments, holding 625 gallons and 625 gallons. Specifications:
- Overall height is 60 inches
- Overall length is 117 inches
- Overall width is 67 inches
- Height to center line of inlet is 52 inches
- Height to center line of exit is 49 inches
- Weight is 10,700 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.
1500 Gallon Dual Septic Tank
Description:Two compartment system with a capacity of 1000 gallons in the first compartment and 500 gallons in the second compartment. The dosage pump portion is usually found in the second compartment. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:
- Overall height is 60 inches
- Overall length is 150 inches
- Overall width is 67 inches
- Height to center line of inlet is 52 inches
- Height to center line of exit is 49 inches
- Weight is 11,700 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections.
Triple Compartment Septic Tanks
Description:Three-compartment system with a solids separator between the first and second compartments. Each compartment holds 500 gallons. The dosage pump segment is usually found in the third compartment. Lower part is cast as a single piece, with no seams that come into touch with effluent or other contaminants. Specifications:
- Overall height is 60 inches
- Overall length is 150 inches
- Overall width is 67 inches
- Height to center line of inlet is 52 inches
- Height to center line of exit is 49 inches
- Weight is 12,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.Options:Plastic or concrete riser sections. Available with pre-wired pump packages, complete with alarm, floats, and pump pad, with horse powers from 1/3 to 1.5, with up to 135 feet of total head capacity.
Chlorine Contact Tanks
Specifications:
- Overall height is 56 inches
- Overall length is 79 inches
- Overall width is 48 inches
- Height to center line of inlet is 48 inches
- Height to center line of outflow is 45 inches
- Weight is 5,000 pounds.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.500_gallon_chlorine_contact_or_grease_interceptor.pdfDownload File
Siphon Dose Tank Packages
Specifications:
- It measures 56 inches in height, 79 inches in length, 48 inches in width, 48 inches in height from center line of intake, 48 inches in height from center line of outlet, and 5,000 pounds in weight. It is equipped with an indoor alarm and alarm float.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.
1000 Gallon Siphon Tank Package
Specifications:
- It measures 60 inches in height, 102 inches in length, and 67 inches in width. It measures 52 inches in height from the center line of the inlet and 52 inches in height from the center line of the outlet. It weighs 10,000 pounds. It comes with an indoor alarm and an alarm float.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.
1250 Gallon Siphon Tank Package
It measures 60 inches in height, 102 inches in length, and 67 inches in width. It measures 52 inches in height from the center line of the inlet and 52 inches in height from the center line of the outlet. It weighs 10,000 pounds. It comes with an indoor alarm and an alarm float. It comes with an alarm float.
- It measures 60 inches in height, 117 inches in length, and 68 inches in width. It measures 52 inches in height from the center line of the inlet and 52 inches in height from the center line of the outlet. It weighs 10,400 pounds. It comes with an indoor alarm and an alarm float.
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.
1500 Gallon Siphon Tank Package
Inlet height to center line of inlet is 52″, outlet height to center line of outlet is 52″, overall height is 60″, overall length is 117″, overall width is 68″, overall weight is 10,400 lbs, and it includes an indoor alarm and an alarm float.
- Overall height is 60 inches
- Overall length is 150 inches
- Overall width is 67 inches
- Height to center line of intake is 52 inches
- Height to center line of exit is 52 inches
- Weight is 13,000 pounds
- Includes indoor alarm and alarm float
Materials of construction:Steel reinforced concrete, minimum compression strength, 4000 psi.Applications:Residential septic applications, single and multifamily dwellings.
