- When we ask whether you leave the tanks open or closed, what we mean is the valve that you open to empty the tanks. When you are in storage or traveling, you’ll obviously leave this valve closed up.
What does the red light on my septic mean?
The red light indicates the alarm is receiving a signal from the pump tank that the water level is rising higher or is dropping lower than it should be. Next, check the septic breaker to ensure the system has power. Try to minimize water usage during this time.
Where is the lid on a septic tank?
You can locate the lid of your septic tank by poking the ground every few feet with a metal probe. Lids can be buried up to a foot deep on average, so be sure to investigate any bumps that may indicate something is buried underneath.
How do I know if my septic tank is working properly?
When your septic tank system is not operating correctly, you will be able to see telltale signs if you know where to look.
- Pipe Gurgling Sounds.
- Toilet Flushing Issues.
- Slow Drains.
- Water Backup.
- Bad Odors.
- Greener Grass.
- Patches of Standing Water.
What does alarm on septic tank mean?
A septic tank alarm system is a device designed to monitor the water elevation inside the tank, and it alerts you when the water level in the tank is much higher or lower than it should be. This raises the water level inside the pump tank until the controls cycle back and come on again.
Do all septic tanks have alarms?
All septic systems that use a pump to move wastewater from a septic pump tank to a drainfield or mound have an alarm installed in the house. The alarm goes off when wastewater is not being pumped from the septic pump tank to the drainfield or mound.
How do septic tanks look?
Septic tanks are typically rectangular in shape and measure approximately 5 feet by 8 feet. In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground. You can use a metal probe to locate its edges and mark the perimeter.
How far down is a septic tank lid?
Often, septic tank lids are at ground level. In most cases, they have buried anywhere from four inches to four feet underground.
How often should a septic tank be pumped?
Inspect and Pump Frequently The average household septic system should be inspected at least every three years by a septic service professional. Household septic tanks are typically pumped every three to five years.
Do septic tanks have two lids?
Locate The Lid A septic tank installed before 1975 will have a single 24-inch concrete lid in the center of the rectangle. A two-compartment tank installed after 1975 will have two lids of either fiberglass or polyethylene, centered at opposite ends of the rectangle.
Can a septic tank have only one lid?
Septic tanks should have one lid per compartment. Most tanks have (2) compartments. So, most residential tanks should have (2) lids about 5′ away from each other.
Will metal detector find septic tank?
If it’s Concrete or Steel, Use a Metal Detector. Based on your conclusions in Step 3, if your septic tank is likely made from concrete or steel, a metal detector can make the task of locating it much easier. But not just any metal detector will do.
How can you tell if your septic tank is leaking?
Signs of Septic Tank Problems
- Foul Odor. If you smell sewer gases, this may mean that one of the system’s lids is either damaged or out of position.
- Lush Vegetation.
- Soggy Yard.
- Standing Water Around Septic Tank.
- Toilets or Sinks Are Backing up or Slow to Drain.
- Alarm Sounds.
Is my septic tank full or clogged?
If the septic tank is completely clogged, water will back up into the house quickly. If the septic tank is only partially clogged, the drains will become slow as the water struggles to wind its way down into the septic tank.
Does heavy rain affect septic tank?
It is common to have a septic back up after or even during a heavy rain. Significant rainfall can quickly flood the ground around the soil absorption area (drainfield) leaving it saturated, making it impossible for water to flow out of your septic system.
7 Signs Your Septic Tank Is Full & Needs Emptying
Septic tank ownership presents a set of issues that are distinct from other types of property ownership. The consequences of failing to empty your septic tank are slightly more significant than those of neglecting to empty your trash cans. If you’ve had a septic tank for a long amount of time, you may have noticed that there are several tell-tale symptoms that your tank may need to be pumped out. If you’re new to having a septic tank, the symptoms listed below will be the most important things to keep an eye out for in the beginning.
How to tell your septic tank is full and needs emptying
- Pooling water, slow drains, odors, an unusually healthy lawn, sewer backup, gurgling pipes, and difficulty flushing are all possible problems.
What Does A “Full” Septic Tank Mean?
Before we get into the seven warning signals you should be on the lookout for, it’s crucial to understand what it means to have a “full” tank. There are three alternative ways to define the term “full.” 1.Normal Level- This simply indicates that your septic tank is filled to the maximum capacity for which it was built. This implies that the intake and outtake valves are free of obstructions and allow waste and wastewater to flow into and out of the septic tank without interruption. When a tank is pumped, it is completely empty; nevertheless, when the tank is utilized, it returns to its typical level of “full.” 2.
- Over time, sludge can accumulate and become entrapped in the system.
- Waste water will continue to flow out of the building and into the drainage system.
- An overfilled tank will eventually reach a point where the drainage field will no longer absorb water.
- The water level will increase to the maximum capacity of the system.
1. POOLING WATER
Water pools accumulating around your septic tank’s drain field are the first item to watch out for while inspecting your system. This is a telltale indicator of a septic tank that has overflowed. It goes without saying that if it hasn’t rained in a while and you’re seeing a lot of water, it’s most likely due to your septic tank failing. Typically, this occurs when your tank is at capacity and there is solid water in the system, which causes it to malfunction. This will then drive the liquid to rise to the surface of the earth.
2. SLOW DRAINS
If you see your sink, bath, or toilet draining slowly, or if you notice any other draining slowly in your house, take note. A blockage in your septic system, or the fact that your system is completely full and has to be emptied, might be the cause of this. Slow drains, in either case, are a warning flag that should not be ignored.
The first line of defense may be to employ a septic-friendly drain cleaner, but if the problem persists, it is advisable to have the septic tank drained completely. In addition, if you see any of the other danger indicators, make a reservation for it to be emptied as soon as you possibly can.
Because all of the waste water from your home will be disposed of in your septic tank, you can be assured that it will not be a nice odor. And it will very certainly have a distinct fragrance that you will notice. In the event that you begin to notice odors surrounding your septic tank, this is another indication that it is either full or near to being full. It’s also possible that you have a leak, therefore it’s important to conduct a fast inspection. The flip side of smells is that it will not just be you who will be able to detect them.
However, it is important to discover a remedy as soon as possible after realizing the problem.
4. A REALLY HEALTHY LAWN
A septic tank that is overflowing has a few beneficial effects. It’s possible that the grass atop your sewage tank is the healthiest patch of grass you’ve ever seen. It will outshine the other elements in your yard, allowing you to spot it more easily. If you do happen to discover this, it’s still another red flag to keep an eye out for. If it’s near your septic tank, it’s possible that water is seeping from your system, indicating that it’s either leaking or that it’s full. Whatever the case, it’s time to get it checked out.
5. SEWER BACKUP
The chances of missing this one are little to none, and it’s absolutely something you don’t want to happen. It’s the most evident, and it’s also the most detrimental. Always keep a watch on the lowest drains in your home, since if they begin to back up, you should get your tank emptied as soon as possible.
6: Gurgling Water
Unless you are aware of any gurgling sounds coming from your pipes, you should ignore them. This is especially true if they are dependable. This is another another indication that your septic tank is overflowing and needs to be drained.
7: Trouble Flushing
If you’re experiencing delayed drainage and you’re seeing that all of your toilets are straining to flush or have a weak flush, it’s possible that your septic tank is full. If this symptom is present in all of the toilets in your home, it indicates that the problem is more widespread than a local blockage.
The Important of Septic Tank EmptyingMaintenance
Maintaining a routine is the most effective way to determine when your tank needs to be emptied, and it is recommended. It’s a straightforward, yet effective, solution. If you can identify correct emptying intervals, it is possible that you will not notice any of the warning indications listed above. The length of time between emptyings will be determined by the size of your septic tank and the number of individuals that use it. According to the Environmental Protection Agency, septic tanks should be drained every 3-5 years at the absolute least.
The following parameters will be taken into consideration when determining the optimum emptying intervals for your tank:
- Typical household characteristics include: size of the septic tank, amount of wastewater generated, and volume of solid waste.
If you’ve recently purchased a property that has a septic tank, be careful to inquire as to whether the previous owners had a maintenance routine. Alternatively, you might simply inquire as to when they last had the tank drained so that you have a general notion. If you do not have access to this information, it is preferable to err on the side of caution and get it emptied as soon as possible. This will leave you in a fresh frame of mind and provide a fresh start for your own personal routine.
It will keep the tank working smoothly, preventing any major problems from developing in the long term.
Otherwise, you may find yourself in the middle of a serious crisis with a major mess on your hands and everywhere else.
Services that are related Septic Tank Cleaning and Emptying Service Continuing Your Education Signs that your septic tank needs to be emptied Is it necessary to empty your septic tank on a regular basis?
What is a septic tank and how does it work? How does one go about their business? How much does it cost to empty a septic tank?
How To Find My Septic Tank
- What is a septic tank
- How do I know if I have a septic tank
- And how do I know if I have a septic tank Identifying the location of your septic tank is critical for several reasons. The Best Way to Find a Septic Tank
- What to Do Once You’ve Discovered Your Septic Tank
You may have fallen in love with your new house because of its appealing good looks and characteristics, but there is almost certainly more to your new home than meets the eye. In many cases, the characteristics that make your house run more effectively and allow you to live a pleasant, contemporary life are not readily apparent. Septic tanks, for example, are an important part of your home’s infrastructure. A septic system is responsible for regulating and managing the wastewater generated by your home.
- “How can I locate my septic tank?” is one of the most often requested inquiries we receive.
- When your tank’s lid is difficult to locate – especially if you are not the original homeowner – you may be at a loss for what to do or where to look for the lid when you need it.
- The majority of the time, all of the components of the septic tank are buried between four inches and four feet below ground level.
- In order to do so, it is necessary to first comprehend the functions of septic tanks and septic systems and why it is important to know where yours is located.
How to Locate Your Septic Tank
Your septic tank’s location is not a closely guarded secret. There will be a method for you to locate it and make a note of its position for future reference, and below are a few examples of such methods.
What Is a Septic Tank?
Having a functioning septic tank is an important aspect of having an effective septic system. In the United States, around 20% of households utilize a septic system to handle their wastewater. Houses in rural parts of New England are the most likely to have a septic system, with residences in the Eastern United States being the most prevalent location for septic systems. When there are few and far between residences, it is typically more efficient and cost-effective to employ a septic system to manage wastewater rather than relying on a public sewage system to handle waste water.
Typically, a septic tank is a container that is waterproof and composed of a material such as concrete, polyethylene, fiberglass, or a combination of these.
An important function of a septic tank is to hold on to wastewater until any particulates in the water separate themselves from the water.
Any liquid that remains in the tank eventually drains into a leach field or a drainfield, where it is known as “effluent.” The dirt in the leach field aids in the filtering of the water and the removal of bacteria, viruses, and other pollutants that may be present in it.
Septic tanks erected in Onondaga County must contain input and outlet baffles, as well as an effluent filter or sanitary tees, in order to effectively separate particles from liquids during the treatment process.
How Do I Know If I Have a Septic Tank?
What is the best way to tell if your home has a septic tank? There are generally a few of different methods to tell. Examining your water bill might help you identify whether or not your house is served by a septic system or is part of the public sewage system in your neighborhood. If you have a septic system for wastewater management, you are likely to receive a charge from the utility provider for wastewater or sewer services of zero dollars. In the case of those who are fortunate enough to have a septic system, it is likely that they may not receive any water bills at all.
- A lack of a meter on the water line that enters your property is typically indicative of the fact that you are utilizing well water rather than public utility water, according to the National Association of Realtors.
- A septic system is likely to be installed in your home if you reside in a rather rural location.
- Septic systems are likely to be installed in all of these buildings, which means your home is likely to be as well.
- When a septic tank is present, it is common to find a mound or tiny hill on the property that is not a natural structure.
- Checking your property records is a foolproof method of determining whether or not your home is equipped with a septic system.
Why It’s Important to Know the Location of Your Septic Tank
You might wonder why you should bother trying to discover out where your septic tank is. There are several important reasons for this:
1. To Be Able to Care for It Properly
The first reason you should try to locate your septic tank is that knowing where it is will help you to properly repair and care for it in the future. The standard guideline is to avoid erecting structures or placing heavy objects on top of the septic tank. It’s possible that you don’t want to park your car or truck on top of it, and you don’t want visitors to your house to park their cars on top of it, either. Due to the weight of the automobiles, there is a possibility that the tank would collapse due to excessive pressure.
2. If You Want to Landscape or Remodel Your Property
If you want to build an addition to your home or perform some landscaping around your property, you will need to know where your septic tank is located. Nothing with deep or lengthy roots should be planted on top of or in the area of your tank, since this can cause problems. If roots are allowed to grow into the pipes of your septic system, it is conceivable that your system will get clogged. When you know where the tank is going to be, you may arrange your landscaping such that only shallow-rooted plants, such as grass, are in close proximity to the tank.
For starters, the tank’s weight might lead it to collapse due to the weight of the construction. A second issue is that getting access to the tank becomes more difficult if a permanent building has been constructed on top of it.
3. If a Problem With Your Tank Occurs
Knowing where your tank is buried might also assist you in identifying problems as soon as they arise. Consider the following scenario: you wake up one morning and see that there is flooding or ponding water in the region surrounding your septic tank – a sign that your system is overwhelmed and that an excessive amount of water is being utilized all at once.
4. Ease of Getting It Fixed
Once you have determined the location of your sewer system, you can quickly send a plumber to it in the event that something goes wrong with the system, saving everyone both time and money. Get in Touch With A Plumber Right Away
1. Use a Septic Tank Map
First and foremost, make use of a road map. Using a map is frequently the quickest and most convenient alternative. Most counties keep records of the installation of septic tanks at all of their residents’ residences. These maps should include schematics that illustrate the specific placement of the tank on the land, as well as measurements that allow you to measure and locate the tank’s exact location on the property. Never mind that landmarks may shift over time depending on when the tank was built, so if there are a few more shrubs or a tree nearby, don’t rule out that location as a possibility.
- If you are unable to locate a map or other paperwork that identifies the location of your septic tank, there are a few locations to try to see if you can obtain a map of the area.
- The county health department is responsible for keeping track of septic systems.
- A septic tank’s position could be depicted on a survey map, for example.
- The creation of your own map and documentation may be worthwhile if you cannot locate a map or blueprint of your property and nothing appears to be on file regarding it at the county health department or another municipal agency.
2. Follow the Pipes to Find Your Septic Tank
Whether or not there is an existing map of your septic tank on file, or whether or not you choose to develop one for future reference or for future homeowners, you will still need to track down and find the tank. One method of accomplishing this is to follow the sewer lines that lead away from your residence. The septic tank is situated along the sewage line that goes from your home and into the yard, as we’re sure you’re aware. Find a four-inch sewer pipe in your basement or crawl space. This is the line that will lead to your septic system and should be accessible from the ground level.
- In general, though, you’re searching for a pipe with a diameter of four inches or more that leaves your home via a basement wall or ceiling.
- By inserting a thin metal probe (also known as a soil probe) into the earth near the sewage line, you can track the pipe’s location.
- The majority of septic tanks are located between 10 and 25 feet away from your home, and they cannot be any closer than five feet.
- Going via the sewage line itself is another method of locating the septic tank utilizing it.
- Drain snakes are typically used to unclog clogs in toilets and drains, and they may be used to do the same thing.
- When the snake comes to a complete halt, it has almost certainly reached the tank.
- While drawing the snake back, make a note of how far it has been extended and whether it has made any bends or turns.
- When looking for your septic tank, you may use a transmitter that you flush down the toilet and it will direct you straight to the tank.
If you only want to keep an eye on the condition of your tank and don’t need to dig it up and inspect it, you may thread a pipe camera into the sewer pipe to see what’s happening.
3. Inspect Your Yard
Septic tanks are designed to be as unobtrusive as possible when they are erected. With the passage of time, and the growth of the grass, it might be difficult to discern the visual indications that indicated the exact location of your septic tank’s installation. However, this does not rule out the possibility of finding evidence that will take you to the location of your septic tank in the future. First and foremost, you want to rule out any potential locations for your septic tank, such as:
- Under a road or similar paved surface, for example. Right up against the house (the tank must be at least five feet away)
- Directly in front of the home Immediately adjacent to your well (if you have one)
- In close proximity to trees or densely planted regions
- In the shadow of a patio, deck, or other building
Once you’ve ruled out any potential locations for your tank, it’s time to start hunting for indications as to where it may be hiding in plain sight. Keep your eyes peeled as you go about your property, looking for any inexplicable high or low points that might suggest the presence of an underground tank. When looking at your property, you could see a hill or mound on the ground, which is frequently an indication that there is a septic tank nearby. One further item to consider while searching for the right septic tank for your home is the amount of grass or other foliage in your yard.
Alternatively, if the tank was not adequately buried, you may observe a “bald patch,” which is an area where the grass is struggling to grow in the vicinity.
4. Talk to Your Neighbors
If your neighbors have septic systems as well, they may be able to assist you in locating your tank. Inquire of your neighbors about the location of their septic tanks in relation to their residences. Having a polite conversation with your neighbors regarding septic systems not only provides you with a means to figure out where yours is, but it may also serve as a friendly introduction to the other residents of your community.
5. Look for Your Septic Tank Lid
It is only the first step in the process to discover where your septic tank is located. After you’ve located your tank, the following step is to locate the lid. You can locate it with the help of your soil probe. The majority of septic tanks are rectangular in shape and measure around five feet by eight feet. The perimeter of the tank should be marked with a probe once it has been probed around. A shallow excavation with a shovel within the tank’s perimeter and near the center (or broken into halves for a two compartment tank) should show the position of the lid or lids if you are unable to feel them by probing.
The tank itself is likely to be filled with foul-smelling vapors, if not potentially hazardous ones.
What to Do After You Find Your Septic Tank
Once you’ve determined where your tank is, it’s time to bring in the specialists. Trust us when we say that opening a septic tank is not something that just anybody wants to undertake. Concrete septic tank lids are extremely heavy and must be lifted using special lifting gear in order to be removed. Since the vapors are potentially dangerous due to the contents of the tank, please respect our advice and refrain from attempting to open the tank yourself. An exposed septic tank can be hazardous to anybody wandering around your property’s perimeter, and if someone were to fall into it, it might be lethal owing to the toxicity of the sewage in the tank.
However, before you send in a team of experienced plumbers, there are a few things you can do to ensure that others do not experience the same difficulty locating the tank and to make locating the tank in the future easier.
1. Mark Its Location
The likelihood is that you will not want to post a large sign in your yard that reads “Septic Tank Here!” but you will want to leave some sort of marking so that you can quickly locate the tank and lid when you need them. In an ideal situation, the marker will be substantial enough that it will not blow away in the wind and will not be readily moved by children who are playing in the yard. A patio paver, a potted plant, or a decorative gnome or rock are just a few of the possibilities. In addition to putting a physical sign beside the septic tank, you may draw a map or layout of the area around it to illustrate its position.
2. Take Care of Your Septic Tank
Taking proper care of your tank may save you hundreds of dollars over the course of its lifetime. The expense of maintaining your system could be a few hundred dollars every few years, but that’s a lot less than the thousands of dollars it might cost to repair or replace a damaged tank or a malfunctioning septic system. Two strategies to take better care of your septic tank and system are to avoid utilizing your drain pipes or toilets as garbage cans and to use less water overall. Things like paper towels, face wipes, and cat litter should not be flushed down the toilet since they are not designed to be flushed.
In addition, installing low-flow faucets and high-efficiency toilets can help you reduce the amount of water used in your home.
For example, you don’t want to be washing load after load of laundry or running your clothes washer at the same time as your dishwasher all at the same time.
Call a Professional Plumber
Maintenance of a septic system is not normally considered a do-it-yourself activity. In the Greater Syracuse region, whether your septic tank requires pumping out or cleaning, or if you want to replace your tank, you should use the services of a reputable plumbing firm to do the job right. If you’ve attempted to locate your septic tank on your own and are still unsure of its position, it may be necessary to enlist the assistance of a professional local plumber. Our team at Mr. Rooter Plumbing of Greater Syracuse can assist you with locating, maintaining, or replacing your home’s sewage tank.
Request an Estimate for the Job
How to Tell When Your Septic Tank Needs Emptying [Top 5 Warning Signs]
In the event that you are a homeowner, your septic tank is most likely one of the most vital components of your property. It’s also something you don’t want to think about all of the time, if at all possible. However, even if it is not on your attention at the time, there are several warning signals that may suggest a problem with your septic tank and the need to get it emptied as soon as possible.
There is no need to be concerned if you are unsure of when your septic tank needs to be emptied! There are a few frequent symptoms that you might spot from your own house that indicate a problem. The only thing you have to do is know what to look for.
Top 5 Signs Your Septic Tank Needs Emptying
Your septic tank is an important part of your house, and it should be examined on a regular basis for indicators that it may need to be emptied. The likelihood is high that your septic system need maintenance if you observe any of these tell-tale indications in the first place. An overflowing septic tank isn’t always as clear as it first appears! Here are some of the most typical warning signs that you have a septic tank that needs to be cleaned out:
Your Drains Are Taking Forever
Your drains are taking longer to move when you flush the toilet (slow drains), do you notice this when you flush the toilet? Or do you have trouble flushing your toilet? If this is true for all of your toilets and sinks in your home, rather than just one, it is probable that you have something more serious than a clog on your hands. The presence of sluggish drains might be one of the first signs of a septic problem. Make use of a drain cleaner that is safe for septic systems. If this does not make a difference and you still observe that everything is draining slowly, it is likely that your septic tank is full.
Standing Water Over Your Septic Tank
Is there water accumulating on top of your septic tank? Septic tanks that are accumulating water are an indication that they need to be pumped. Because there is nowhere else for the surplus water to go, it collects in your yard. A related issue to keep an eye out for is the overall health of your lawn. If water is accumulating around your septic tank, you may notice that the vegetation surrounding your sewage tank appears to be particularly healthy. Perhaps you’ve observed an overabundance of weeds or flowers blooming out of the vicinity.
Occasionally, this occurs prior to the water pooling.
Bad Smells Coming From Your Yard
Have you detected any bad scents in the recent past? Check to see whether they are emanating from your yard, and more especially, from your drainage field. It’s possible that you’re smelling sewage water! We recommend that you call us immediately if you notice any sewage stench. We can examine your septic tank. When your septic tank is nearly full, you will notice a distinct odor. e
You Hear Gurgling Water
In some cases, gurgling water might indicate the presence of a backlog in the making. In the event that you hear the sound of gurgling water coming from your pipes, this might indicate that your tank is becoming backed up and needs to be emptied.
You Have A Sewage Backup
It is every homeowner’s greatest fear to have sewage backing up into their house. If you are experiencing sewage backup, it is likely that your tank has not been completely emptied. This occurs when your waste water is having difficulty draining away from your home. Depending on how the wastewater got into your house, it might come up through your toilet and sink drains, or even your shower drain. Blockages are the root cause of sewage backups. When there is an excessive amount of food waste, septic tanks might become clogged.
It is also possible to cause a septic obstruction by flushing the improper objects down the toilet, such as feminine hygiene products or cat litter, for example.
During routine septic maintenance, we are able to discover obstructions. During a septic tank cleaning, we may eliminate the accumulation of waste. More information may be found at: What is the best way to clean out your septic tank?
Atlanta’s1 Trusted Septic Company
The Original Plumber provides service to the Atlanta metro region in Northern Georgia. We provide plumbing services for both business and residential properties. Maintaining your septic tank on a regular basis might help you avoid costly problems down the line. Everything from drain cleaning to sewage line repair is included in our services, so we can take care of all of your needs at the same time! We are familiar with the signs to watch for and can assist you in avoiding any unwanted tank repairs or expenditures.
We place a high importance on integrity and honesty, which is why we give upfront pricing so that there are no surprises.
Frequently Asked Questions
We recommend that you get your septic tank pumped on a regular basis, every three to five years. The Environmental Protection Agency has established this as the standard. Depending on the size of your tank and whether or not you use a garbage disposal, you may need to have your septic tank pumped more regularly. Not only will this service assist you in keeping your septic tank clean and healthy, but it will also allow us to discover any problems before they become a serious issue. Maintaining a routine might assist you in determining when it is necessary to empty your tank.
In the event that you have recently moved into a property and the previous owners did not disclose much information regarding your septic system, give us a call for ourseptic system inspectionservice.
We can assist you in determining all you need to know and determining whether or not you require maintenance.
What happens if you don’t empty your septic tank?
If you do not empty your septic tank on a regular basis, your waste will eventually become too much for your septic system to handle. Solids accumulate with time, and your tank can only carry a certain amount of them. You run the danger of experiencing a sewage backup as a result of this.
Do all septic tanks need emptying?
The tank in your septic system should be emptied every three to five years, regardless of the type of system you have installed. Septic tanks are constructed in such a way that heavier materials settle near the bottom of the tank, rather than the top. If the sludge layer becomes too thick, the solid waste will begin to seep into your drain field or leach field, causing it to overflow. This can result in obstructions in the drain field, which prevents the liquid from draining into the drainage system.
Does Your Septic System Require A New Pump?
A septic tank’s waste and sewage are evacuated from it and discharged into a drain field, either by gravity or with the assistance of a septic system lift pump. In most cases, a septic pump is not required if the waste can flow at a rate of at least two feet per second through the system using gravity alone.
Pumps are typically required for septic tanks that are located lower than the drain field and for which gravity is unable to transport and/or force the effluent out of the tank due to its location.
Know If Your System Uses A Septic Effluent Pump Or Septic Grinder Pump
Knowing what sort of pump your septic system is equipped with is critical to the overall operation of the system. A septic effluent pump is a device that transfers waste from a septic tank to a drain field. A septic grinder pump is responsible for the grinding and movement of human waste and toilet paper. Septic tank businesses in Gainesville, FL such as Jones PlumbingSeptic Tank Service can help if you’re not sure what sort of pump the system is using or where it’s located in the system. Our professionals will identify the pump and check the septic system in order to notify you of the procedures that need to be taken in order to keep all components in proper operating order.
How Septic Pumps Work
A septic pump is a sort of submersible pump that is installed in either the last chamber of the septic tank or in a separate chamber outside the main tank of the system. As waste builds up in the chamber, it activates a float switch, which then activates the septic pump. After that, waste is forced up the outflow pipe and into the drain field by an impeller. Installing a septic tank pump alarm is an excellent strategy to avoid having to clean out your septic tank on a regular basis. One of our professionals will connect the float switch to an alarm panel, which will sound if the pump fails for any reason during the installation.
This alarm will ring and notify you if there is a sewage backup in your home.
Maintenance For A Septic Pump
The upkeep of a septic pump goes hand in hand with the upkeep of a septic system in its whole. Never drain or flush any of the following common home objects to avoid the need for emergency septic service and to ensure the pump’s long-term functionality:
- Baby wipes
- Cat litter
- Fats, oils, and/or grease produced by or utilized in the preparation of meals
- Dental floss
- Personal hygiene products
- And Q-tips or other cotton swabs are all recommended.
In addition, avoid using the garbage disposal because this can cause the septic tank to fill up more rapidly and force water into the tank, among other things. If there is an excessive amount of water entering the septic system, it can cause sediments to enter the septic pump, resulting in a probable blockage in either the pump or the drain field. If or when this occurs, contact Jones PlumbingSeptic Tank Service for prompt and dependable septic tank repairs.
Common Septic Pump Issues
Even with proper maintenance, a septic pump can develop a variety of problems over time, including the following:
Noise Or No Noise
There are occasions when it is possible to hear the septic pump operating within the chamber itself. Do not hesitate to contact us for septic service if it appears that the pump is having difficulty or is failing to transport waste effectively.
Leaking Into The Septic Tank
The septic pump is equipped with a check valve, which provides a pressure gradient in order to keep the waste flowing through the pump and into the drainage system. Whenever the valve wears down or breaks, waste is forced back into the septic tank, causing the tank to overflow and back up into the pipes.
Floats can become stuck open or closed, or they might become damaged as a result of material entering the septic tank.
Depending on the extent of the damage, a professional from Jones PlumbingSeptic Tank Service may be able to remove the debris or may need to replace the float entirely.
Burnt Out Motor
If the motor within the septic pump burns out or fails, the pump will be unable to transfer waste, even if the energy is still being supplied to the device, since the waste would be trapped. In most cases, replacing the pump will address the problem.
Installing A New Septic Pump Or System
Jones PlumbingSeptic Tank Service will replace your septic tank if it is essential, and they will also install a new pump. Everything begins with an application, which is needed by the Florida Department of Health. We will always assist you in filling out the application and applying for any permissions that may be required. Our professionals will be pleased to walk you through the procedure and answer any questions you may have along the way.
Septic Tank Service
Jones PlumbingSeptic Tank Service can solve any septic issue, regardless of whether your sewage system currently has a pump or if you’re interested whether installing a pump will increase the system’s overall efficiency. When performing septic tank repairs in Gainesville, our specialists take into consideration the demands of the family or company. Call Jones PlumbingSeptic Tank Service immediately to make an appointment for septic service!
How Your Septic System Works
Underground wastewater treatment facilities, known as septic systems, are often employed in rural regions where there are no centralized sewage lines. They clean wastewater from residential plumbing, such as that produced by bathrooms, kitchen drains, and laundry, by combining natural processes with well-established technology. A conventional septic system is comprised of two components: a septic tank and a drainfield, often known as a soil absorption field. It is the septic tank’s job to decompose organic matter and to remove floatable stuff (such as oils and grease) and solids from wastewater.
Alternate treatment systems rely on pumps or gravity to assist septic tank effluent in trickling through a variety of media such as sand, organic matter (e.g., peat and sawdust), constructed wetlands, or other media to remove or neutralize pollutants such as pathogens that cause disease, nitrogen, phosphorus, and other contaminants.
Specifically, this is how a typical conventional septic system works:
- All of the water that leaves your home drains down a single main drainage pipe and into a septic tank. An underground, water-tight container, often composed of concrete, fiberglass, or polyethylene, serves as a septic system’s holding tank. Its function is to retain wastewater for a long enough period of time to allow particles to sink to the bottom and form sludge, while oil and grease float to the surface and produce scum. Sludge and scum are prevented from exiting the tank and moving into the drainfield region by compartments and a T-shaped outlet. After that, the liquid wastewater (effluent) exits the tank and flows into the drainfield. The drainfield is a shallow, covered hole dug in unsaturated soil that serves as a drainage system. Porous surfaces are used to release pretreated wastewater because they allow the wastewater to pass through the soil and into the groundwater. In the process of percolating through the soil, wastewater is accepted, treated, and dispersed by the soil, finally discharging into groundwater. Finally, if the drainfield becomes overburdened with too much liquid, it can flood, causing sewage to flow to the ground surface or resulting in toilet backups and sink backups. Finally, wastewater percolates into the soil, where it is naturally removed of harmful coliform bacteria, viruses, and nutrients. Coliform bacteria are a kind of bacteria that may be found in the intestines of humans and other warm-blooded animals, with humans being the most common host. As a result of human fecal contamination, it is a sign of this.
The Guadalupe-Blanco River Authority has built an animated, interactive model of how a residential septic system works, which you can view here.
Do you have a septic system?
It’s possible that you’re already aware that you have a septic system. If you are not sure, here are some tell-tale symptoms that you most likely are:
- You make use of well water. In your home, the water pipe that brings water into the house does not have a meter. In the case of a water bill or a property tax bill, you will see “$0.00 Sewer Amount Charged.” It is possible that your neighbors have a septic system
How to find your septic system
You can locate your septic system once you have confirmed that you have one by following these steps:
- Taking a look at the “as constructed” drawing of your house
- Making a visual inspection of your yard for lids and manhole covers
- Getting in touch with a septic system service provider for assistance in locating it
Failure symptoms: Mind the signs!
A bad odor is not necessarily the first indicator of a septic system that is failing to work properly. Any of the following signs should prompt you to seek expert assistance:
- Water backing up into the drains of homes and businesses
- It is especially noticeable in dry weather that the drainfield grass is bright green and spongy. The presence of standing water or muddy soil near your septic system or in your basement
- A strong stench emanating from the area surrounding the septic tank and drainfield
8 Signs of Septic System Failure
Septic tanks are an important resource for both homeowners and the surrounding community. Its goal is to store domestic wastewater in an underground chamber where it may be treated at a basic level. They are generally composed of plastic, fiberglass, and concrete and serve as a sewage disposal system for the home or business owner. Sewage can leak underground and move upward in the earth if a septic unit fails, which can cause flooding.
Not only may this result in serious plumbing issues, but it can also pose a health threat over time. Do you have concerns that your septic system may be malfunctioning? If that’s the case, these are the eight indicators of a failing septic system.
1. Septic System Backup
Everything that has to do with plumbing in your home is tied to your septic system. Sewage and wastewater will no longer be able to enter the tank if your septic system malfunctions or becomes overburdened. Instead, it will remain in the pipes until it begins to rise to the surface again. Sewage and wastewater back up into sinks, drains, and even into your toilet as a result of this condition. A clogged septic tank is the most obvious indicator of a failing system. You should contact a qualified plumber as soon as you discover this symptom to get it repaired.
2. Slow Drains
Slow drainage might also be caused by a clogged septic tank. For example, if a septic tank is completely filled, it will no longer actively collect wastewater from the ground. This implies that your pipes will become blocked with sewage and will be unable to drain your plumbing appliances properly. Your drains will become naturally sluggish in draining water or other liquids, as a result of this phenomenon. Even if you utilize the best gear available to unclog your drain, you will not be successful since the fundamental problem is located in the septic tank.
3. Gurgling Sounds
When using plumbing appliances, you should also be on the lookout for any unusual sounds that may occur. For example, if you flush your toilet and hear strange gurgling sounds, you should call a plumber right once to assess the situation. Toilets generally emit water-related sounds that subside once the flushing cycle is completed. If, on the other hand, you hear sounds that sound like an upset stomach, you may have a serious problem. If you are hearing gurgling noises coming from your drains, the same logic applies.
4. Pool of Water or Dampness Near Drainfield
It is no longer possible to absorb wastewater in a septic tank when it is damaged or fails. This indicates that wastewater will naturally seep out of the earth as a result of the groundwater table. It has the potential to create a significant pool of wastewater near the drain field, as well as cause dampness in the same area. These are the most obvious indications of a failing septic system, and they should not be ignored. A pool of water near the drainfield will often appear as if it has been raining on your lawn for an extended period of time.
If you have reason to believe that your septic tank is full or broken, make a point of actively looking for these signs.
5. Nasty Odors
One such tell-tale indicator of a failing septic system is the development of foul odors near the drainfield and plumbing equipment. If you notice strong and nasty scents when you walk outdoors and tread onto your grass, it is possible that your septic tank has failed.
If the bad aromas emanating from your house are the same as those emanating from the office, you can reach a similar conclusion. It is likely that sewage has entered your home through the drainfield and into your main drain line, resulting in these foul odors.
6. Unusual, Bright Green Grass Above Drainfield
Have you ever seen people applying mulch, fertilizers, and manure to their lawns in order to encourage it to grow more quickly? It is possible that sewage has the same features as manure, namely that it contains nutrients such as nitrogen, potassium, phosphorus, and micronutrients that plants can use to thrive. When you see exceptionally green grass near your drainfield, it is likely that wastewater is leaking into your lawn from the drainfield itself. Due to the fact that grass is naturally green, identifying this symptom might be difficult.
Pay close attention to your drainfield in order to identify this problem before it becomes too serious.
7. Blooms of Algae in Nearby Water
If you live near a body of water, such as a lake or pond, keep an eye out for unexpected algal blooms that appear out of nowhere. Due to the fact that most individuals regard the appearance of algae to be a regular occurrence, diagnosing this symptom can also be difficult. Algal blooms, on the other hand, occur when a huge concentration of algae forms in a body of water. They appear to be artificial and to be the result of excessive algal contamination in the water. When wastewater is present, it might lead to the growth of algae that is aberrant.
8. High Levels of Coliform in Water Well
A neighboring water well may also be able to identify abnormal amounts of coliform bacteria as well as high quantities of nitrogen dioxide (nitrogen dioxide). However, if your septic system fails, the water in your well will get contaminated with bacteria and harsh chemicals by effluent from the surrounding area. Give Us a Call Right Now! Any problems with your septic tank now occupy your thoughts? If this is the case, please contact us at (941) 721-4645 to talk with a member of our staff. You may also learn more about our septic services by visiting this page.
Frequently Asked Questions (FAQs)
Do you have any other queries concerning septic systems? Please let us know. If this is the case, you may find a comprehensive list of FAQs farther down on this page.
How much do septic system repair services cost?
- A septic system repair service might cost anywhere from $500 to $2,000 in labor and materials. The ultimate cost is determined by the extent of the task, the number of hours worked, and other factors.
Can a septic drainfield be repaired?
- Even though there is no quick remedy for drainfield repair, it is achievable if you employ an expert plumber or septic system specialist.
How often do septic systems need to be replaced?
- Septic systems may endure for more than 40 years if they are properly maintained. Every three years, the average septic tank should be examined and pumped out in order to avoid long-term problems and septic system failure.
Septic Tank: 5 Signs Yours Needs Emptying
Septic Tank: 5 Signs That It Is Time to Empty It It’s the dirty little secret that no one wants to speak about, but if you have one, it’s one of the most vital aspects of your house to have. Of course, I’m referring to the septic tank in question. As a former suburbanite who relocated to a rural community, I can tell you from personal experience that if you neglect about the proper manner of garbage disposal in your home, you’ll be left with an unpleasant problem to deal with. Fortunately, there are several very simple techniques to determine whether or not your septic system is becoming overburdened, allowing you to have it repaired before the odor becomes unbearable.
How to tell your septic tank is full and needs emptying
- Pooling water, slow drainage, odors, an excessively healthy lawn, and sewer backup are all possible problems.
1. Pooling water
Pools of water in your lawn after a hard rain are one thing; however, a tiny lake on or near the drain field of your septic system might indicate that it is overflowing with waste water.
When your tank reaches capacity, solid waste might block the drain field pipe system, causing liquid to rise to the surface. If this is the case, it is essential to have your system pumped out as soon as possible.
2. Slow drains
The presence of a blockage in your home’s drains should be taken seriously. It is possible that the system is overburdened if they continue to run slowly after unclogging methods, such as the use of drain cleaning (which is septic safe, of course). The same is true for toilets that take a long time to flush!
A septic system gathers not just trash but also all of the gray water that is produced by activities such as showering, cleaning dishes, and doing laundry, among other things. When combined with the waste water from the toilets, this generates an odorous concoction that would have the skunks in the area covering their noses in disgust. If you notice any bad scents in your yard, it may be time to contact for professional assistance.
4. An overly healthy lawn
Contrary to common opinion, the grass that grows over your sewage bed should be the same color as the grass that grows elsewhere on your property. If the vegetation in that region looks to be excessively green and lush, this might suggest that your septic system is leaking liquids and that it needs to be emptied or checked for leaks.
5. Sewer backup
A sewer backup is almost certainly the most evident, if not the most obnoxious, indicator that your tank has reached its limit, and it is also the most unpleasant. Sewer backups are more likely to occur in the lowest drains, such as a basement bathroom, so keep an eye out for these. If this occurs, contact a specialist as soon as possible. Septic systems are a fantastic environmentally friendly option that saves you money on municipal sewer taxes that would otherwise appear on your tax bill. They are also reasonably simple to maintain if you keep on top of it.
Always use environmentally friendly cleansers and paper products that are suitable for septic systems, and avoid overloading the system with additional impurities.
Image courtesy of Flickr and Flickr
Keep Your Septic System Safe
Maintaining your septic system is essential for the safety of you and your family. Every year, individuals are injured when they fall through crumbling tanks or unsecured lids, and the cause is unknown. The majority of tanks are so deep that they can potentially induce drowning in some cases. Drainage system failures and sewage surfacing can potentially make you sick, according to the CDC. Septic systems are safer and more ecologically friendly when they are maintained and protected on a regular basis.
- Make a note of the location of your septic system. To locate your system, look up record drawings on the internet.
- Children and dogs should not be allowed to play around sewage tank covers. Structures to be constructed above the drainfield
- Vehicles and heavy equipment causing damage to your drainfield
- Walk around your home on a regular basis and take efforts to reduce health and safety issues. Make a visual inspection of the drainfield and down slope regions for damaged equipment, smells, damp spots, or the presence of sewage on the surface. Cover the tank holes with lids that are both sturdy and easy to hold in place. Damage and cracks should be looked for. Plastic lids should be fastened into the risers with a strong grip. Children should not be allowed to play near sewage tank covers. Children are naturally inquisitive and like exploring the great outdoors. However, messing about with the septic tank or attempting to open the top might be hazardous. Falls into or around the tank might result in significant injury to children or pets, depending on their size. Bacterial exposure might potentially pose a threat to one’s health. Have your septic system examined on a regular basis by a septic service professional who has been certified by the Tacoma-Pierce County Health Department septic service professional. Inspections guarantee that the system is safe and that it is performing as intended. They will inform you whether or not pumping is required.
These suggestions will not only keep your family secure, but they will also:
- By identifying problems early on, you may help to avoid costly repairs. Keeping ground, surface, and drinking water free of contaminants is essential. Maintain or improve the ability of bacterial contamination to reach Puget Sound either directly or by storm water runoff into creeks and streams
- Maintain the safety of shellfish obtained from public waterways for consumption.
Onsite atehseptic systems may be reached at [email protected] or (253) 649-1421.
How to Find Your Septic Tank
Over time, all septic tanks become clogged with sediments and must be pumped out in order to continue functioning properly. Septic tank lids are frequently located at ground level. The majority of the time, they have been buried anywhere between four inches and four feet underground. In the event that you have recently purchased a property and are unsure as to where your septic tank is located, this article will give instructions on how to identify your septic tank. Noteworthy: While every property is unique, septic tanks are usually typically huge and difficult to build.
5 Ways to Find Your Septic Tank
1. Check with the municipal records. The most straightforward method of locating your septic tank is to review the building plans for your home that were approved by the local government. You should have received an application from the business that installed the septic tank, which should contain schematics and specifications that will help you to locate the precise location where the septic tank was installed. 2. Look for highs and lows in your data. The majority of septic tanks are constructed in such a way that they are barely noticeable.
Almost usually, your septic tank will be constructed near where the main sewage line exits your property.
Septic tanks are typically positioned between ten and twenty-five feet away from a home’s foundation.
When you do, that’s when your septic tank comes into play!
Look for the Lid.
You will most likely find two polyethylene or fiberglass covers positioned on opposing sides of the perimeter of your septic tank if it was built after 1975 and installed after 1975.
Those areas should be excavated in order to disclose the lids.
Get in touch with the pros.
Lifting concrete lids will necessitate the use of specialized equipment.
A fall into an unprotected septic tank has the potential to be lethal.
Produce your own diagram of your yard, which you may file away with your other important house paperwork.
That’s all there is to it! If you’ve been wondering where your septic tank is, you now have five alternatives to choose from, which should make finding it easier than ever. To book a plumbing service in Bastrop County, please contact us now!