- Install direct burial cable from the breaker box of your home to the septic tank. Wire the cable to a weatherproof electrical box located outside the septic tank. Route the plug wire from the septic tank pump up and out of the tank to the new electrical box.
Does aerobic septic system need electricity?
Aerobic Septic System Regular Operating Costs year depending on electricity rates where you live. – also between $25 and $250. year depending on electricity rates where you live.
How do septic tank aerators work?
An aerator, or air pump, pushes air and oxygen into your septic system. The additional oxygen increases natural bacterial activity within the system, that then provides additional treatment for nutrients in the effluent.
How long should a septic tank aerator run?
The aerator should run 24/7 nonstop and should not cost more than 10 dollars a month to run. If you electric bill is high something else is causing it or the system is not correctly hooked up.
How do I know if my septic aerator is working?
The surest sign your aerator has failed is an overwhelming unpleasant odor coming from where your system discharges, whether into a secondary treatment system or directly into the environment.
Should a septic tank aerator run all the time?
The aerator should run 24/7. It should continuously provide much-needed oxygen inside the septic tank of an aerobic system. The aerobic bacteria need air to survive.
Can I add an aerator to my septic tank?
The SepAerator® Septic Tank Aerator from Septic Solutions can be added to any existing septic tank to rejuvenate failing secondary treatment systems such as drainfields, mound systems, and sand filters. This system was designed by experts with over 25 year experience in the aerobic treatment industry.
What size aerator do I need for a septic tank?
A typical septic aerator pump might run at 5 CFM or 80 LPM of air output. The typical range of septic air pumps for residential septic systems is about 2 to 8 cfm or from about 40 to 200 LPM of air.
How much does it cost to pump an aerobic septic tank?
On average, it costs $410 to clean or pump a septic tank. Most homeowners spend between $287 and $545. It’s possible for extremely large tanks to run $1,000 or more. Most tanks need pumping every 3 to 5 years with inspections every 1 to 3 years.
How much does it cost to pump an aerobic septic system?
An aerobic septic system has an average cost between $10,000 and $20,000. You need to have the system professionally inspected and pumped every one to three years, which has an average cost of $200. Aerobic systems may need motor & timer replacements from time to time.
What is the difference between aerobic and anaerobic septic systems?
The basic difference between aerobic and anaerobic septic systems is the presence or absence of oxygen. Traditional anaerobic septic systems operate in underground tanks and in the relative absence of oxygen. Aerobic septic systems are thus able to support aerobic forms of bacteria.
How to Install a Septic Aerator
A septicaeratoriis a relatively basic and straightforward piece of equipment to install in your septic system. The aerator is particularly beneficial for older septic systems since it contributes to the addition and provision of a significant amount of oxygen to the septic system. The presence of oxygen in the waste that flows to and from your septic tank is a critical component of the breakdown process. A professional can often complete the installation of this equipment in a matter of hours.
The procedure is, on the other hand, manageable and quite straightforward.
Step 1 – Familiarize Yourself with the Unit
As soon as you have acquired the sepic aeration system, you should bring out the instruction manual and go through the information that is contained within that particular item. Make certain that you have gone over all of the specifics. Learn about the parts, components, and factors that make up your new system so that you are comfortable with them. If you have any questions, you should contact with a specialist that specializes in the installation of these sorts of systems. Step 2 – Have the land surveyors come out and measure it.
- A survey will be required if you wish to apply for a construction permit to install the septic system on your property.
- Before you can start working on your septic system, you must first apply for a permit and submit a schematic of your system to the appropriate local government agency.
- To find out who you need to contact in order to obtain the application, seek up the phone number or the location of your local township or municipality on the internet.
- They will be able to point you in the direction of the application process.
Step 4 – Install a Riser and Lid Kit
If you do not already have a riser and lid kit installed on your septic system, you should purchase one. Install the kit first, then proceed to install the aerator. This will make it easier for you to acquire access to your septic system for future renovations and work. Each riser and lid set is unique in its own way. Make certain that the instructions provided by the manufacturer are followed.
Step 5 – Install the Aeration Pump
The aeration pump must be put at a reasonable distance of your residence. The pump is directly connected to the aerator (which was built in Step 3) and will assist in pumping in the additional oxygen that is required in the tank.
Step 6 – Install the Aerator
In the septic tank, the aerator is directly connected to the tank’s pump. It has to be pushed all the way down to the bottom of your septic tank to be effective. The seventh step is to close the lid on your septic system.
Step 8 – Clean Up and Wash EverythingWash and clean everything thoroughly. You have just finished working in an environment that contains millions of bacterium particles. Make sure to wash your hands with an anti-bacterial soap or solution when you’ve finished.
Four Tips for Installing A Septic Aeration System
With the aging and deteriorating of septic systems, a variety of difficulties may occur that can lead to backups in your septic tank and drain field, as well as standing water and other concerns in and around your drain field. Installing an aeration system may frequently assist in improving the functioning of your existing system as well as resolving these issues in a timely and safe manner. Using systems such as those supplied by Aero-Stream, you may improve the efficiency of your existing septic system without having to spend the money and time on a complete replacement.
Read the instructions
Please make sure that you have all of the necessary tools and equipment before commencing the installation of your new septic aerator (see video). This can save you a significant amount of time and effort throughout the installation procedure. In certain circumstances, additional electrical cabling may be required in order to power your new aeration system; reviewing the installation instructions ahead of time will help to ensure that the entire operation goes smoothly and according to schedule.
Plan for future access
A septic tank riser kit, depending on the architecture of your current septic system, may be necessary in order to provide easy access to the aerator should septic system difficulties emerge in the future. Incorporating an access point for your new aeration system might make it easier to execute repairs in the event that they become necessary. When installed at the same time as the initial aerator installation, septic tank risers may be readily removed and reinstalled, allowing for more ease when performing future maintenance and repair activities.
Cover the wires
Aerator pumps are electrically driven pumps that are situated above ground and operated by electricity. These systems, which are intended for outdoor usage, are safe and dependable when used as intended. Nonetheless, shielding or covering the electrical cables and outlets can help to prevent moisture and weather from causing damage to these critical components of the aeration system. While mowing the grass or completing other gardening duties around the house, taking this precaution will help you prevent accidentally damaging your electrical wiring and appliances.
Add a filter
Adding an effluent filter to the septic tank system during the installation process is a good option since it will help to reduce the quantity of solid waste that can escape the system during the repair process. Aeration may help avoid clogs and blockages in the output pipe, and it can also help to ensure that your freshly aerated septic system is processing wastewater and particle matter as efficiently as possible. If an effluent filter is being built, it is highly recommended that an aseptic tank riser be erected.
Using these four suggestions, you may considerably boost the efficiency and functionality of your current septic tank and drain field by introducing a sophisticated aeration solution that can significantly improve the efficiency and functionality of this critical household system.
Is My Aerobic Septic System Supposed to Run All the Time?
7:00 p.m. on May 23, 2019 One of the most often asked concerns we have from our clients is if their aerobic septic system is meant to be operating all of the time. The answer is both yes and no. The vast majority of septic systems are equipped with air compressors that are continually running. Some companies, like as Norweco, do, however, provide an Aerator that is meant to operate for 30 minutes on and then 30 minutes off. The inquiry itself seems to reflect a lack of understanding of how septic systems are meant to work in their most basic form and function.
- Here is some information to take into consideration.
- The tank is normally rectangular or cylindrical in shape, and it is composed of concrete, polyethylene, or fiberglass in most cases.
- During the disposal process, the particles that enter the septic tank float on top of the water where they interact with beneficial bacteria and begin to decompose.
- Septic tanks are available in a variety of configurations, including double-compartment and single-compartment configurations.
- It still carries pathogens, contaminants, and organic waste despite the fact that it has undergone some treatment.
- Accordingly, wastewater shall not be dumped onto the ground’s surface or into any surface or ground water.
- The drainfield should be suitably covered with grasses or shallow-rooted plants to prevent erosion.
- Its capacity to function as an efficient filter may be compromised if the soil is contaminated.
Think about how frequently you use your home’s water sources, together with how long it takes for bacteria in the system to react with the solids over a lengthy period of time, and you’ll see why the system must be running at all times, not only to keep it running but to keep it running properly.
Get in touch with Countryside Construction Inc. now to discover more about the inner workings of your aerobic septic system in Canyon Lake and the Foothill Communities of Texas! Aerobic Treatment Systems are a subcategory of this category. Admin is the author of this blog article.
The SepAerator™ Septic Tank Aerator Installation Instructions
The SepAeratorTM is relatively simple to install into an existing septic tank and may be completed in the following steps:
- Find the lids that cover the input and outflow portions of your septic tank by digging down. A 12 inch spa-flex airline should be attached to the diffuser assembly and lowered to the bottom of your septic tank’s inflow part. (See illustration.) Attach the other end of the 12 spa-flex airline to the air pump, which will easily plug into a standard 115-volt outlet
- And Install the filter assembly at the discharge end of your septic tank, where it will connect to the outlet line. It should adhere to the surface. We even provide the adhesive
- Just let us know.
Note: Because the diffuser assembly would only be cleaned on a very infrequent basis, risers above this component would be unnecessary. In order to protect the Air Driven Particle Recirculation System or filters included in some packages, we propose that you install our optionalriser and lid kits, which would extend the septic tank opening to, or slightly above, the ground level, rather than using the included filters. This is required in order to provide simple access to these critical components, which would need to be removed and washed with a garden hose on a regular basis.
The filter is a required and essential component of any aerobic conversion kit, and it will need to be cleaned on a regular basis to keep it operating properly.
SepAerator™Premium Package Detailed Installation Instructions
A SepAeratorTM may be installed on an existing septic tank in as little as a few hours since the installation process is so straightforward. Even those with very basic mechanical abilities can install a SepAeratorTM on an existing septic tank. Please verify with your local authorities because rules differ from county to county and state to state. Local rules may demand that the SepAeratorTM be installed by a licensed septic system installationcontractor in order to be compliant. 1. Identify the location of your existing septic tank.
- Performing regular pumping is vital to remove all of the particles and sludge that has accumulated in your tank.
- Then, once you’ve discovered your septic tank, you’ll need to identify two areas on the tank.
- At these areas, dig down to the tank’s bottom and remove any existing covers.
- Install the Air Driven Particle Recirculator on the recirculation system.
- To install the Air Driven Particle Recirculator, first remove any existing baffles, then clean the pipe and glue the device to the outlet.
- With a minor level, you can verify this claim.
- Schedule 35 and 40 pipe, as well as the expand n lok adapter, are compatible with the filter tee.
When installing the Air Driven Particle Recirculator, if you got the Premiumpackage, you must connect the little 14-inch airline that came with it to the adapter fitting at the top.
Transfer to the front compartment of the septic tank and secure the current cover to the septic tank.
You’ll need a hole with a minimum diameter of 8 inches for this.
INSTRUCTIONS FOR INSTALLING OPTIONAL RISERS AND LIDS ARE INCLUDED.
Place a bead of caulking or sealant over the bottom of one of the tank adapter rings and let dry.
Place the riseron adapter ring on top of the riseron and secure it with screws.
This will make it possible to have access to the components as necessary for periodic maintenance and examination.
Note: If you have a single compartment septic tank, it is required to install an Air Driven Particle Recirculator on the outflow line of your septic tank.
4.Assemble and attach the Diffuser Assembly to the wall.
The airline has previously been joined to the top section of the diffuser assembly.
Lower the diffuser assembly into the septic tank through the aperture above the intake until it rests firmly on the bottom of the tank.
Take all required steps to ensure that your septic tank remains watertight following the installation of any components.
5.Connect the Diffuser Assembly to the Air Pump using the connectors provided.
Attach the 14-inch airline from the septic tankfilter to the fitting supplied on the air pump at this point, if you are using ourPremium Package as well.
Air pump installation at a distance may be accomplished by gluing 12 schedule40 pvc tubing or more spa-flex to the diffuser assembly and air pump installation at a distance.
Place the platform at a sufficient height so that the air pump does not flood.
Keep dirt and other debris away from the bottom of the housing.
7.An optional alarm and control panel is available.
It is important to note that a least of 14-2 underground cable must be laid to power the alarm.
Once the 115-volt electrical connections have been established, the power should be turned on.
8.Inspect and backfill all risers and power lines thoroughly.
This is required in order to prevent the danger of tank floating as well as to ensure appropriate operation of the pump and diffuser assemblies.
It is intended for the air pump to operate on a continual basis.
The majority of pumps consume less than 2 amps.
The little filter positioned on top of the air pump should be removed and cleaned with air or water once every six months, and it should be changed once every twelve months.
In order for a considerable volume of germs to grow, it may take between 4 and 12 weeks.
In each state, there are several types of installations. It is solely the responsibility of the end user (homeowner/purchaser) to ensure that the items are installed in accordance with all applicable county/state/federal laws, rules, and guidelines currently in place before using the products.
What Happens When Your Septic Aerator Alarm Goes Off? – B&B Pumping – Top Rated Septic Cleaning Services
There are a variety of reasons why the alarm goes off. Even if the problem is minor, the alarm will ring to make sure that you fix it as soon as possible when it occurs. A problem with the timer, on the other hand, is one of the most common causes for an alarm to go off in the first place. Several aerator alarms are equipped with some form of timing device. In order to keep the drain field from overflowing during periods of excessive water demand, the timing must be set appropriately. These timer systems are in charge of cycling the septic tank through a series of cycles to guarantee that it does not overdose the drain field with sewage.
- In this instance, the water levels will rise until the timer is able to engage the pump once more.
- There are a variety of reasons why this procedure may cause the alarm to sound.
- Additionally, if there is groundwater infiltration into the septic tank system, the alert may ring.
- In addition to these being the most common causes of alarms, we’ve discovered that a failure inside one of the tank’s components can also result in an alert being activated.
- It is possible that the chlorinator is blocked. There is an issue with the alarm’s wiring
- It needs to be repaired. The diffuser has become blocked. The float switch is not working properly
- The aerator is not operational or has insufficient air pressure
Pumps, Risers, Covers & More
Somewhat choked up, the chlorinator might be the problem. In this case, there is an issue with the alarm wiring. A blockage has built up in the diffuser. An issue with the floating switch has arisen. Inoperable or with insufficient air pressure, the aerator
FAMILY OWNED COMPANY WITH OVER 100 YEARS OF COMBINED EXPERIENCE!
Founded in 1989 by the James family, our firm is a leader in the industry. All five members of the family are still actively involved in the operation of the company today! We have the necessary expertise and knowledge of the items. Customers have come to rely on Septic Solutions, Inc.® to supply them with the high-quality goods and excellent customer service that they require. In 2003, we launched our online store to service clients throughout the United States and even internationally. Our objective was to provide a comprehensive selection of septic system products for every application at the most competitive pricing feasible.
WE STAND BEHIND THE 1,000+ PRODUCTS THAT WE SELL!
Purchasing your septic system goods from Septic Solutions® offers several advantages, one of which is that we are familiar with the items we sell. It is owned and maintained by a family that has been installing, maintaining, building, designing, and selling septic systems and supplies since 1989. Septic Solutions® is a trademark of Septic Solutions, Inc. We are familiar with the goods we sell since we have been utilizing and maintaining the majority of them for a significant number of years. Since then, we’ve learned which things work and which do not, which products endure for long periods of time and which ones do not, and which items are worth investing in.
Know that all of us at Septic Solutions® value your business and will be here to help you and the goods we provide for many years to come.
A federally registered trademark with registration number 3,215,128 is owned by Septic Solutions, Inc., and is referred to as “SEPTIC SOLUTIONS, INC.” A federally recognized trademark with registration number 3,731,246 is owned by Septic Solutions, Inc.
owns the trademark “ULTRA-AIR,” which is a nationally registered trademark with registration number 4,763,426.
Septic Solutions, Inc. owns the trademark “SEPAERATOR,” which is a nationally registered trademark with registration number 4,763,454. Federal Copyright Registration TXu 2-030-959 owned by Septic Solutions, Inc. provides protection for the content of this website. Septic Solutions, Inc.
What do I do if My Septic Alarm is Going Off?
In the event that your septic alarm goes off, it may surely create some anxiety and uncertainty; and if you happen to be experiencing this right now, then you’ve arrived to the correct location! Don’t be concerned; it does not necessitate urgent action. Instead, take your time to go through this full essay so that you will be prepared to act now or in the future if the situation arises. What Septic Systems Are and How They Work The alarm works in conjunction with the septic system to alert you when the water level within the pump tank has increased to an unsafe level or has decreased to an unsafe level.
- The timer is in charge of regulating the time intervals during which the pump is permitted to pump wastewater into the drainage system.
- Thus, during periods of excessive water use, the drain field is kept from getting overflowing, which might cause damage to the drainage system.
- A large amount of water is injected into the system in between pumping cycles for whatever cause, and the water has nowhere else to go but back into the system’s pump tank.
- Depending on how much water was and continues to be put into the system and how the pump is set up to operate on a timer, it may take many pumping cycles until the water levels are returned to normal.
- There is an excessive amount of water being put into the septic system. This is the result of excessive water use, which might be caused by multiple loads of laundry, an excessive quantity of dishwashing, or a disproportionate number of long showers.
- In the septic system, there is an excessive amount of water being released. If you have been doing a lot of laundry or dishwashing, or taking a lot of long showers, you may have noticed this. It is the effect of excessive water use.
- It’s possible that one of the components of the septic system is malfunctioning. If anything goes wrong with your system — including the pump and floats — the alarm and timer will go off and the septic system will stop working correctly.
The Best Thing to Do If Your Alarm Goes Off Alternatively, if you hear an alert, you should press the red button or turn on the alarm box. The alarm will be turned off as a result of this action. There should be a red light and a green light on the alarm box, which should be situated someplace on the unit. The green light indicates that the alarm is operational and should be left on at all times. It is shown by a red light if the alarm is getting a signal from the pump tank indicating that the water level is increasing above or decreasing below what is expected.
- If the breaker occurs to be tripped, look around the septic tanks to see if there is any standing water.
- It is possible that the red light on the alarm box will go out on its own after allowing the septic system to operate for a couple of pump cycles (which should take approximately 10-15 hours).
- If the red light turns off, it signifies that the system is operating properly and that it only needs to catch up with the extra water that has overflowed into the storage tank.
- To be clear, an alarm signal from the septic system does not always imply that sewage is about to back up into the house right away.
- Do you require septic system repair on a regular basis or emergency service?
To arrange an appointment, please call (804) 581-0001 or send us an email through our contact page. Want to learn more about septic systems? Explore our septic system web sites by clicking on the “Septic” navigation option in the top navigation bar.
Septic System Installation (600gal/day)
The range is $9,500.00 to $14,550.00. The construction of concrete aerobic plants for septic systems with capacities of up to 600 gallon per day for aerobic systems in an easily accessible region with level topography to the excavation site is described below. The price covers the permit, design, installation, as well as a two-year guarantee and maintenance program.
Installation of aerobic septic systems with a capacity of up to 600 gallons per day. The cost listed on the website is for a readily accessible region with level terrain to the excavation site, with a concrete aerobic plant as the primary source of energy. The price covers the permit, design, installation, as well as a two-year guarantee and maintenance program. Job requests may be turned down after a site inspection or if the criterion does not match what is doable given the materials and access described in the quote, for example.
The system consists of the following components:
- In one package, you get a Nuwater B550 aerobic concrete plant with garbage tank and a 735 pump tank. Two Krain spray heads are included. Up to 120′ 3/4′′ purple pipe
- Up to 20′ 3′′ or 4′′ scdl 40 pipe
- One two-way cleanout
- Up to 120′ 3/4′′ purple pipe tee with a sanitary spout
- Up to 20 feet of 1/2 inch scdl 40 pipe
- Up to 40 feet of 3/4 inch conduit
- Up to 45 feet of 7-strand conductor wire Control panel for the night spray
- Nuwater aerator, several fittings, and 20 yards of sand are included.
This pricing estimate is valid for a system with a capacity of up to 600 gpd, a living space of less than 4,501 sq ft, and five bedrooms or fewer. Larger sizes must be priced on an individual basis. For further information, please contact us.
|Pump Old System
|Need to pump old system for replacement, No replacement needed (new system)
|Haul off excavated soil or rock, Spread excavated soil, Leave soil as-is
|Rock excavation, No rock excavation, Unsure (will be charged if rock is found)
|Electrical Inside Structure
|Connect breaker box to control panel, No electrical work needed
|Liquid Bleach Chlorinator (Optional)
|Add LBC brand liquid bleach chlorinator, No liquid bleach chlorinator
|Ozone Disinfection Device (Optional)
|Add ozone disinfection device, No ozone disinfection device
FAQs About Septic Tank Aerators
It’s possible that you’ve recently moved into a home that has an aeration system or an aerated septic tank, or that you’re looking to install a new ATU to repair your current septic system, that you’re looking for answers aboutseptic tank aerators. If this is the case, you’ve come to the right place. Depending on where you reside and what state you live in, an aerated septic system is referred to by a variety of various names: Aerobic Treatment Unit (ATU), aeration system, septic aerator, advanced onsite treatment unit, and other terms are used to describe these devices.
The septic tank aerator is sometimes the sole moving item in the whole system.
As a result, you want to make certain that it is constantly working smoothly and that it is regularly maintained.
- What is a septic tank aerator and how does it work? An aerator, also known as an air pump, is a device that forces air and oxygen into your septic system. When there is an increased amount of oxygen available to natural bacteria in the system, this improves the amount of treatment that can be provided for nutrients in the effluent. Air is drawn into the tank by an aerator system from the outside and pumped through the tank by a pipe network and diffuser that are located inside the tank. What are the advantages of installing a septic aerator? There are several advantages to this system, including the fact that it can be used in homes with smaller lots, inadequate soil conditions, in areas where the water table is too high, and in homes located near a surface water body that is sensitive to contamination by nutrients contained in wastewater effluent. ATUs should be maintained on a regular basis during their service life. How difficult is it to keep a septic tank aeration system running? As with any onsite septic system, you will need to pump your tank every 3-5 years, as is standard practice. Always be cautious of what you put into a tank that has an aeration system
- The Think at the Sinkbrochure from the EPA SepticSmart program is a fantastic resource for guidance. As the moving parts of your aerator near the end of their service life, you will need to repair or replace them as necessary. Always use authentic manufacturer certified components for any repairs, as aftermarket parts may invalidate any warranties and may not be able to withstand the stresses placed on your system as a whole. If your aerator is of a certain size, the ambient temperature in your location, whether or not your in-tank diffusers require cleaning, and how your pump is installed will all influence how long it will last. Which HIBLOW air pump do I need for my septic system and how many do I need? Please check with the manufacturer of your overall treatment system to confirm that the air pump is the proper size for your particular unit. Another advantage of using a professional service provider is that they can help you select which HIBLOW pump type you require. Where can I get repair kits for my air pump? We have a large number of distributors around North America that can offer you with both pumps and repair parts. Contact one of our distributors now. Please contact us via email or phone to find out which location is the nearest or most convenient for you. Make certain that the items you are utilizing are genuine factory approved parts. When you use aftermarket components, the performance of your air pump may be affected, and it may not be able to achieve the pressures necessary for your system
Contact HIBLOW for Septic Aerators!
The use of ourHIBLOW aerators by wastewater treatment facilities for both residences and businesses can assist to ensure that only treated water is discharged back into the environment. “ Thank you very much, Mike, for your outstanding customer service and for recommending a reputable distribution company.
I wasn’t sure what I needed, but the HP-60 aeration pump, diffuser, and sinking air line that I received have exceeded my expectations. Perfect!” Please get in touch with us right away for additional details!
Septic Services Gazette
Septic Services news and information is available from this site. You’ll also discover articles that are both informative and useful, as well as ideas and suggestions for those who own septic systems. Listed below is a helpful step-by-step tutorial that describes the right installation technique for a shaft–style septic aerator in detail. Articles that are related: The Different Types of Aerators|Understanding Septic Tank Aeration
- Remove the power supply from the existing aerator. Water and electricity do not mix well, thus it is extremely vital to take safety precautions while working with them. Before removing the aerator from the tank, be sure that the power has been disconnected from the existing aerator. If the electricity to the aerator is controlled by a circuit breaker, do not just turn the switch off
- Instead, check to see if the tank need pumping. After removing the aerator from the tank, shine a flashlight into the tank to investigate the interior of the vessel. If you see a large amount of floating debris, it is likely that your tank requires pumping. If it has been more than 4-5 years since your last tank pumping, or if you are unsure when your tank was last pumped, you should have the tank pumped out prior to replacing the aerator. If you are unsure when your tank was last pumped, you should have the tank pumped out before replacing the aerator. Without pumping the tank and replacing the aerator, your septic system will not operate any better than it did before. Determine and address the root cause of the initial aerator’s failure. Once the existing aerator has been removed from the tank, it should be inspected for damage. The device may fail if debris wraps around the shaft, which is possible in rare cases. This would be a sign that your tank needs to be drained and cleaned. Check to see if there is a sewage backup or if there is a clog in the septic tank’s discharge pipe. Additionally, look for an electrical problem. Check the voltage at the tank with a voltage meter to confirm that the electricity is operating properly at the tank. It is not possible to repair your septic system problem by just replacing an aerator without addressing the underlying issues. Assemble the equipment in accordance with the manufacturer’s specifications. Your aerator unit is now complete, and you may begin assembling it. Follow the assembly instructions provided by the manufacturer, which were included with the aerator. Incorporate an aerator inside the tank. Insert the aerator into the tank through the riser with the shaft end facing up. The brackets for the lower motor housing should be positioned so that they rest on the bottom of the riser aperture and the upper brackets should be tight on the sides of the tank riser opening.
- Make certain that you are using the right size mini-breaker in the control panel, or that you are using the mini-breaker given by the manufacturer. A breaker that is not correctly sized does not give enough protection against aerator failure. Take care to ensure that nothing is interfering with the rotation of the shaft, such as stray cables. Check to see that the aerator brackets are secure and that the aerator is securely mounted in the tank riser. A clogged aerator will not function correctly and will wear down more quickly as a result. Examine and ensure that the electrical plug end is free of corrosion. Ensure that the voltage reading of the electricity to the aerator is accurate. An insufficient amount of electricity will impair the aerator’s capacity to generate adequate air flow into the tank. Check to ensure that the control panel or timer is configured appropriately according to the manufacturer’s instructions.
Reconnect the power supply to the aerator. Unlike conventional aerators, which operate constantly, aerators are not equipped with an on/off switch. Once you have connected the aerator to an electrical source, the aerator will begin to operate. Replace the tank riser cover with a new one. The aerator’s power supply should be connected. There is no on/off switch on aerators because they are designed to run constantly. The aerator will begin to operate as soon as you connect it to an electrical source.