How To Unclog Tub Drain With Septic Tank? (Perfect answer)

Dump a couple of teaspoons of baking soda into your clogged drain, followed by one half cup of vinegar. This will create a fizzing action that may cause a fizz-like eruption. This is normal. This fizzing action may help to break the clog up and get things moving in your drain once again.

What drain cleaner is safe for septic systems?

All Drano products are septic safe, and Drano Max Build-Up Remover is designed to be used on a monthly basis to replenish your septic system’s bacteria. Like septic safe Drano products, all Liquid Plumr products are safe for use with septic systems and will not upset the balance of bacteria in your tank.

Can Drano be used with a septic tank?

Will Drano^® products harm my septic system? No, all Drano^® products are septic safe drain cleaners and will not upset the bacterial action in septic systems. Use Drano^® Max Build-Up Remover on a monthly basis to replenish the bacteria in the septic system that help break down toilet paper and organic matter in pipes.

Is baking soda and vinegar safe for septic systems?

Will baking soda hurt a septic system? Baking soda and other common household solutions such as vinegar are not harmful to your septic system. Harsh chemicals such as bleach and ammonia can disrupt the good bacteria in your septic tank and should not be used as part of a septic treatment.

Is Green Gobbler drain clog dissolver safe for septic tanks?

Are Drano and Green Gobbler products safe for all pipes? Drano products are safe to use on plastic and metal pipes, but it will damage rubber pipes and tubes. Green Gobbler products are completely safe to use on all types of pipes and drain systems.

What are the signs that your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

• Your Drains Are Taking Forever.
• Standing Water Over Your Septic Tank.
• Bad Smells Coming From Your Yard.
• You Hear Gurgling Water.
• You Have A Sewage Backup.
• How often should you empty your septic tank?

Are long showers bad for septic systems?

Washing frequent, small loads of laundry or taking exceptionally long showers every day is all it takes to overload your septic system with too much water. The primary treatment tank needs time to break up solids before partly-treated water can enter the drain field.

Can you use drain Unblocker with a septic tank?

One of the most powerful chemicals in any household is drain cleaner. Liquid drain cleaners are typically safe for septic systems, but you should check the label and/or the Internet to be sure. Foaming or solid drain cleaners can disable your septic tank and will probably cause damage.

What can break down poop in septic tank?

Yeast helps actively breaks down waste solids when added to your septic system. Flush ½ cup of dry baking yeast down the toilet, the first time. Add ¼ cup of instant yeast every 4 months, after the initial addition.

How do you dissolve sludge in a septic tank?

How to Reduce Sludge in a Septic Tank Without Pumping

1. Install an aeration system with diffused air in your septic tank.
2. Break up any compacted sludge.
3. Add a bio-activator or microbe blend.
4. Maintain the aeration system.
5. Add additional Microbes as required.

Can you use hydrogen peroxide in a septic system?

There are many natural options for say, disinfectants, that exist which will not harm a septic system. For some of the stronger natural disinfectants such as Hydrogen Peroxide and Thyme Oil, their strength will still require them to be diluted with water before being introduced to the system.

Do septic tank additives really work?

There is little scientific data to suggest that you should add bacteria or enzymes to your septic system. The United States Environmental Protection Agency reported that biological additives do not appear to improve the performance of healthy septic tanks.

How do I make my own septic tank cleaner?

First start by mixing a quarter of a cup of Baking soda with a half cup of vinegar and put directly into toilet. Then add two tablespoons of Lemon juice. The baking soda combined with the vinegar causes a chemical reaction that fizzles and helps break down grim and dirt.

Does the Green Gobbler work?

5.0 out of 5 stars Works great. I followed the instructions for a bathroom sink, and when I poured the hot water down, it backed a about a quart of brown water, then started to go down, but stopped with about a pint of water still sitting in the sink. I used a small plunger, and two pushes, and everything went down.

Septic-Safe Methods for Unclogging a Drain

A clogged drain is a source of frustration for any homeowner, but when a clogged drain occurs in a home with a septic system, one of the most pressing concerns is how to clear the drain without causing damage to the septic system itself. Many homeowners’ first instinct is to grab for a chemical drain cleaner, but if you have a septic system, these harsh chemicals should be the very last thing you use to unclog a drain to avoid damaging it. Drain unclogging procedures that are safe for septic systems are discussed in this section.

Why Chemical Drain Cleaners are Bad for Septic Systems

Despite the fact that chemical drain cleaners are appealing, they are a poor choice for unclogging clogged drains in houses that have septic systems, according to the American Chemical Society. The principle behind chemical drain cleaners is straightforward: send harsh chemicals down the drain, and the clog will be eaten away by the chemicals until it is tiny enough to flow through the pipes. The chemicals are physically melting the blockage away from the pipes. Chemical drain cleaners are among the household cleaners that are prohibited from being used with septic systems due to the presence of sodium hydroxide, sometimes known as lye, in one of its essential constituents.

All of these chemicals are not only detrimental to the bacterial environment of the septic system, but they are also very corrosive and will eat away at the tank’s structural integrity as well.

Septic-Safe Method1: Unclogging a Drain with Boiling Water

Sometimes the most straightforward option is the most effective. Small blockages in pipes may frequently be cleaned by gently pouring boiling water down the drain, which is quite effective. This approach is very effective for unclogging obstructions produced by oil, soap, or even tiny clumps of human hair. It is essential that the water is boiling for this procedure to be effective – not just hot, but boiling hot. This strategy, on the other hand, necessitates considerable caution. It is possible that pouring hot water upon a porcelain sink will result in the sink cracking.

Boiling water has the additional effect of softening the joints in PVC pipes, and as a result, we do not advocate using this procedure with PVC pipes.

Septic-Safe Method2: Unclogging a Drain with VinegarBaking Soda

As children, we used to make volcanoes out of baking soda, vinegar, and red food coloring, which we could see exploding from the ground. As adults, the same experiment (without the red food dye) may be used to unclog a clogged drain without causing damage to the septic system. Whenever baking soda and vinegar are mixed together, a chemical reaction happens, resulting in the formation of carbonic acid, which rapidly decomposes to produce carbon dioxide gas. As a result, what happened? Numerous bubbles with the ability to loosen and clear away the majority of obstructions are released into the air.

Repeat this process twice more. Close the drain and wait half an hour before flushing with hot (or boiling) water to clear the blockage. In addition to being septic-safe, this tried-and-true method of unclogging a drain is also totally safe for the plumbing inside your home.

Septic-Safe Method3: Unclogging a Drain Manually

After trying the first two techniques of cleaning a blocked drain and failing miserably, it may be necessary to don some dishwashing gloves and personally remove the obstruction. Carefully dislodge the clog with a plunger, a plastic drain cleaning tool, or a heavy-duty plumber’s snake to either loosen it enough to allow it to flow through the home’s plumbing or completely remove it from the pipes. The following methods should only be used as a last option, prior to hiring a plumber, and you must exercise caution to ensure that you do not mistakenly harm the afflicted drains by driving a snake into or out of the plumbing system.

Drain Maintenance

One good way to deal with clogged drains is to help prevent them from happening in the first place. Fats, oils, and greases, which account for many kitchen drain clogs, shouldneverbe poured down the sink. Because hair is the most common cause of bathroom clogs, it is also a good idea to useprotective screensthat will prevent hair from going down the drains. When these septic-safe methods for unclogging a drain do not work, it may be a sign that your septic system is in need of a check-up. Are your drains running slow and gurgling?

How Do You Unclog a Drain if You Have a Septic System?

A blockage in your drain may cause water to not drain as efficiently as it should. Most of the time, when this happens, you buy a bottle of chemical drain cleaner and pour some of it down the drain. The chemicals work their way through the clog, enabling water to flow freely through the drain once more. Chemical drain cleaners, on the other hand, should not be utilized if you have a septic system. In addition to killing beneficial enzymes and bacteria in your tank that aid in waste breakdown, chemical drain cleaners can also be harmful to the tank itself, causing it to rupture.

• The simplest approach of trying to unclog a clogged drain is to just pour hot water down the drain until the obstruction is removed.
• The hot water will help to release any oil or soap that is creating the blockage, and the rush of water will aid to loosen any hair clogs that have formed in the drain.
• If hot water does not work, the next approach you may try is a combination of baking soda and vinegar, which should be effective.
• This will induce a fizzing activity, which may result in a fizz-like explosion as a result.
• In certain cases, the fizzing motion might assist to break up the blockage and get things moving in your drain once more.
• In contrast to conventional drain cleaner, septic-safe drain cleaner does not include the potentially dangerous compounds found in regular drain cleaner.

Make certain, however, that the item you are using does mention that it is safe for septic systems. A septic-safe drain cleaning product should always be kept on hand in the event that your home is equipped with one. If all other procedures fail, you can use this approach to unclog your drains.

What Can Unclog a Drain & Be Safe for the Septic System?

Whenever you have a clogged drain and your home drains into a septic system, it’s critical to utilize a drain cleaner that is suitable for septic systems. Featured image courtesy of Bill Oxford/iStock/Getty Images Whenever you have a clogged drain and your home drains into a septic system, it’s critical to utilize a drain cleaner that is suitable for septic systems. Regular drain cleaners can interact with and destroy the microorganisms in your septic tank, which is why you should avoid them.

The importance of maintaining the right balance in your septic system cannot be overstated.

Drano and Liquid Plumr

When confronted with a clogged drain, the majority of people immediately grab for the chemical drain cleaners. This is not always a smart idea if you have a septic system installed. An effective septic tank is fundamentally a bacterial ecosystem, and maintaining a healthy mix of bacteria is critical to the process of decomposition of organic waste. Septic tank bacteria balance is disrupted mostly as a result of chemical exposure, which includes numerous drain cleaners and other household products.

All Drano products are septic-safe, and Drano Max Build-Up Remover is intended to be used on a monthly basis to replace the bacteria in your septic system’s biological filter.

Natural Drain Cleaners

Using a plunger to attempt to unclog a drain is one of the safest methods of doing so. It is non-invasive and frequently effective in clearing tiny obstructions. The use of a plunger while dealing with a chemical drain cleaner, even if it’s a septic safe drain cleaner, should be avoided at all costs since it can cause the product to splash back on you. Using a plunger is recommended before using a drain cleaner, but it is not required. Many homeowners are adamant about avoiding using a septic-safe Drano or Liquid Plumr solution for a variety of reasons.

An all-natural septic safe drain cleaner that is popular for more significant blockages is a combination of baking soda and vinegar.

Maintenance to Prevent Clogged Drains

You can do some simple maintenance on your septic system to maintain it in good working order and eliminate the need to unclog your drains. This will prevent blockages from accumulating in your pipes. The most straightforward approach to accomplish this is to avoid flushing anything down the drain that might clog a pipe, such as grease and oils. Because hair is a typical source of clogged drains, it’s a good idea to install protective screens over your shower and tub drains to collect any hair that may fall through.

For those who believe they will be unable to function without their disposal, there are various kinds on the market that are safe for use with septic systems.

As a result, regular home items such as bleach and certain soaps and detergents will aid to maintain the essential balance that can be thrown off by these products.

How To Unclog Your Drains At Home?

Drain obstructions are a frequent problem, but they may often be handled without the need for a professional’s assistance. Furthermore, you will not be need to employ dangerous chemicals in order to clean up your blockage. With a little patience and certain tried-and-true procedures, you can frequently unclog your own drain in a relatively short period of time with minimal effort. There may be additional considerations you should take into account when removing clogs from your septic system to ensure that back up does not negatively impact your septic tank or cause problems with septic tank pumping or solid wastes in theseptic tank.

• First and foremost, attempt to physically remove whatever is causing the difficulty. Hair accumulated around a pop-up stopper or strainer is one of the most prevalent causes of blockages. You may be able to performdrain cleaning and remove the hair while also clearing thedrain clog, or you may be able to use a drain stick to clear obstructions in thedrain pipe produced by hair in a P-trap or an S-trap, depending on the situation. Sink trap cleaning may remove clogs caused by buildup or a foreign item
• A plunger can clear clogs that aren’t too far down the pipes
• And a plumbing snake can clear deep blockages
• A chemical drain cleaner can break up persistent clogs. Select a product that is appropriate for your system as well as the sort of pipes you have. If you have a septic system, for example, you need make sure the drain cleaner is septic-safe. Drain cleaners should never be mixed, and you should avoid using any drain opening equipment after using a drain cleaner. Because the chemicals in drain cleaners are harsh compounds that can create chemical reactions, it is important not to allow them to come into contact with finished fixtures such as faucets, stoppers, or drain trim. A natural drain cleaner is a less harmful option. Aside from being softer on your pipes and other features, natural drain cleaners are less likely to have a negative impact on the environment than chemical drain cleaners. Natural drain cleaners that use particular enzymes or other septic safe drain cleaners are the most environmentally friendly. Drain Cleaner Made at Home: Pour 12 cup baking soda down the drain, ensuring sure it goes all the way down. Drain a 12 cup white vinegar into the drain and cover the drain with a stopper or a towel immediately to ensure that the bubbles remain in the drain. Remove the cloth or stopper and pour another 12 cup of vinegar into the drain, repeating the process for another 2 minutes. Once you’ve waited 15-30 minutes, flush the drain with a gallon of hot water. If the clog is really tenacious, you may have to repeat the procedure. Grease clogs are particularly susceptible to this treatment, which is why dish soap and hot water should be utilized. All you have to do is pour a generous amount of dish soap down the drain, followed by a pot full of boiling water
• Pour a cup of hydrogen peroxide and one spoonful of baking soda down the drain and let it sit for a few minutes. Pour in enough boiling water to create foam, and the chemical reaction will take place, breaking up the blockage and clearing the sink drain/shower drains, kitchen drains, and other drains. Prevention is always preferable to cure. Never pour coffee grounds, grease, or anything else that has the potential to harden or clump down a sink or drain line. Make use of plenty of cold water if you are using a garbage disposal to flush down any food particles. Clean pop-up stoppers and strainers on a regular basis, and consider applying a treatment that is intended to decrease buildup and corrosion in pipework. This will help avoid clogged drains and gurgling, as well as the requirement for a plumber’s snake or auger to be installed.

When You Need a Professional Plumber’s Help

If you are unable to remove a clog, whether it is in your kitchen sink, main line, wastewater line, or anyplace else in your plumbing system, it may be necessary to bring in the pros at A-1 Sewer and Septic Service for assistance. As a family-owned business that has been serving the inhabitants of the Kansas City Metro Area since 1968, we have built a reputation for providing efficient service at competitive, up-front costs. We are accessible on your timetable and may provide same-day and weekend service if necessary.

Septic System Life Hacks With Vinegar

Septic System Life Hacks Using VinegarIf you’re a homeowner who has a septic system, or even if you just want to keep the plumbing in your home running smoothly, we’ve compiled a fast list of septic system life hacks that you can use using vinegar to keep your system running smoothly. You can clean and unclog your drains with these inexpensive procedures while also maintaining your septic tank. If you haven’t already heard, chemical drain cleaners purchased at the shop can actually do more harm than good to your septic system.

You should always call one of our specialists if you need to have your septic system inspected or treated.

Cleaning The Dishwasher

Even the dishwasher need a thorough cleaning every now and again. Simply place 1 cup of baking soda in the bottom of the dishwasher and run the machine for the whole cycle. Thus, soap accumulation on the inner machinery as well as on the glassware will be lessened. This should be done once a month.

Unclog Your Drain

This method is intended for use with slow-moving drains and mild obstructions. If you’re experiencing a severe drain clog, we recommend that you contact one of our knowledgeable specialists. In order to do this septic system life hack, you need need 1/2 cup baking soda and 1 cup white vinegar.

Pour the baking soda down the drain and allow it to settle for a few minutes before continuing. After that, add the vinegar. Allow it to rest for a further 15 to 20 minutes, or until the bubbles have subsided. Then, flush the drain with hot water to clear it out.

Deodorizing Garbage Disposals

First and foremost, we should definitely point out that having a trash disposal in a property with a septic tank is not a smart idea in most cases. Garbage disposals are extremely hazardous to the health of your septic system, and they may cause blockages and backups in your system. In the event that you do have a garbage disposal, there are a variety of methods for keeping it smelling fresh. In thisGuide to Garbage Disposals, you may learn how to grind citrus peels with ice cubes, for example.

In this case, we recommend putting 1/4 cup baking soda in the disposal and running it for a few seconds to activate it.

After that, add 1 cup of vinegar to the mixture.

The chemical reaction will deodorize the drain while also dislodging any food particles that may have become lodged in the disposal as a result of using this procedure.

Drain Maintenance

This following hack is intended to be used as a preventative maintenance method for the drains in your home on a regular basis. Keep in mind that regular maintenance and prevention are half of the battle when it comes to keeping your septic system healthy. If you’re experiencing any severe difficulties, please contact us immediately via telephone. Don’t wait for an issue to worsen before taking action. In a similar manner to the unclogging approach described above, you may add 1/2 cup baking soda followed by 1 cup vinegar to your drains to help keep them free and clear.

If you run out of baking soda, you may also pour white vinegar down the drain, let it sit for 30 minutes, and then flush with hot water once a week if you are running low on baking soda supplies.

Bonus Tip:DIY Cleaning Products

Do you have a problem with gnats or ants in your kitchen, or do you think you could have a problem? Fill a third of the way with vinegar in an empty spray bottle. Fill the remainder of the container with water and a few drops of dish soap. It is possible to clean your counter tops with this inexpensive combination while also keeping the pests away! Use these septic system life hacks with vinegar for routine maintenance and to unclog small obstructions in your system. If you’re experiencing major problems, such as septic system backups or severe drain obstructions, give our highly trained specialists at Lapin Services a call right once.

Please contact Lapin Services if you require assistance with your plumbing, septic tank, drainfield, or commercial issues.

How to Unclog a Drain and Septic Tank : Tips and Tricks

• Plumbing
• Unclogging
• Septic Tank
• Blocked
• Septic System
• Pipes and Drains
• How to Plumbing

A few methods for unclogging a septic tank drain, as well as suggestions for speeding up a slow drain, difficulties that may arise while unclogging a drain, and preventative steps to avoid blocked septic tanks and drains will be discussed in this article. As well as how to unclog a septic tank and strategies to handle typical septic problems that may arise as a consequence of a full septic tank or clogged septic lines, this article will teach you how to unclog a septic tank. Your kitchen sink drain or bathtub drain is attached to a specific branch line and drains at a slower rate than usual because of this.

Reasons for a clogged bath or kitchen drain:

• Dumping food or solid stuff down the drains is prohibited. Putting oil or other sticky substances into the kitchen sink
• Dumping chemicals or paints down the drains is not acceptable. Hair down the drains of the bathtub and shower
• Ventilation that is improper and/or insufficient Drainage system that is clogged Septic intake or outlet that is clogged

Common Causes of Clogged Drains

Many various things may cause your kitchen sink drain or bathroom drains to get clogged, but the most typical reasons of clogged drains are still leftover food and grease from the kitchen that is poured down the kitchen sink, as well as hair that is flushed down the bathtub and shower drain. Another typical reason of clogged drains is the buildup of paints and other chemicals inside the drain pipe, which solidify and block the line. In many cases, you will be able to unclog a blocked kitchen sink or a clogged bathtub drain on your own.

Ways to unclog a drain:

• Baking soda and vinegar drain unclogging is an alternate and more natural method of unclogging a clog in the drain. Vinegar and baking soda have no negative impact on the environment. A plunger can be used to clear a clogged drain. This method will work for clogs of modest size and will not cost you much money. If the obstruction continues, consult with a professional. Although it is more expensive, unclogging a drain with a cable or auger may be quite successful in removing solid obstructions in the drain and even breaking through thick roots
• Yet, it is also more efficient. Pouring paint or other sticky and oily materials down the drain can produce blockages, and high-pressure water jetting is more successful at clearing them.

Before you begin utilizing high-pressure water jetting to unclog your drain, be sure that your pipes are capable of withstanding the high pressure that will be applied by the high-pressure jet. Otherwise, the high pressure will rip your pipes apart. Hydro jetting is best left to the professionals, such as your local plumbers.

Ways to avoid clogged drains and a full septic tank:

• Avoid blocking your sink drain by pouring solid objects or oily stuff down it. Cover the drains in your toilet and kitchen with filters to protect hair and solid things from entering the drain system. Make certain that suitable numbers of air vents are provided, and that the diameters of the vents are acceptable for all of your fixtures.

Problem II: All of your home’s drainage lines are sluggish to drain, and the drain water from the main drainage line is backed up in a pool.

Possible causes for a slow drain:

• An obstruction has formed in a section of the main drain line
• An obstruction has formed at the drain intake or outflow of the septic tank. A section of the percolation pipes has become jammed
• The septic tank vent has become obstructed. Low temperatures have caused the sewage tank or septic vents to become iced over
• One of the distribution boxes has been blocked off

Ways to unclog a main drain or full septic tank:

• To unclog the main drain line, use a snake or high-pressure water jetting. This is the work of a professional. By virtue of his knowledge and experience, he can snake a sluggish drain, determine if the blockage is caused by solid waste, oily substances, or roots, and apply the most appropriate procedure to unclog the drain. Verify that there is no blockage at the entrance or exit of the septic tank owing to solid wastes or scum, among other things. Check the distribution box, which is placed between the septic tank and the percolators, for easy flow once the block has been removed. If there are any obstacles, they should be removed. Check the region around the percolators for any problems. Check to see whether the area is damp, marshy, or smelly. It indicates that the percolation process is not working properly. Another type of work is where the earth is not absorbing the drain water at the same pace as it is being discharged. It might be because your water use has increased recently as a result of the increased number of guests, or it could be because the soil has been saturated as a result of moisture from other sources such as rainfall (which has been above average), or both. If your septic tank has frozen due to inclement weather, call an expert right away
• If your septic tank has frozen due to inclement weather, call an expert right away. Use the septic tank as a storage tank until the tank has completely thawed on its own if you can’t find a professional or the tools you need to do the job. You will be able to hang on for a longer period of time if you make wise use of water. Winterizing the septic tank before the following winter will help to prevent it from freezing in the future.

Preventive measures to avoid a blocked main or slow drain:

• Please be considerate of your septic tank. It is intended solely for the disposal of organic waste materials. Avoid depositing non-biodegradable and inorganic garbage in landfills. They will very certainly overflow a septic tank and interfere with the regular operation of the septic tank. Use drain filters in your toilet and kitchen to catch hair and solid things that are flowing down the drain. In order to avoid the septic tank from freezing in the winter, it should be winterized. If you are considering a lengthy trip, you should empty your septic tank and seek professional assistance. Winterization is dependent on the area and weather conditions. A simple investment here will spare you from all of the difficulties you may face throughout the winter.

External References

• Natural ways to unclog a drain include the use of vinegar, baking soda, and water (theGoodHuman.com), among others. On eHow.com, you can learn how to unclog a sink naturally.

Related articles:

Maintain the smooth operation of your kitchen and bathroom drains. Learn how to unclog a clogged sink, tub, or shower drain with these simple steps. Please keep in mind that product pricing, availability, and item numbers may differ from market to market.

How to Unclog a Drain

• It is possible that a clog that cannot be cleared with one way will open if you apply a combination of procedures
• Start with the simplest fixes and work your way up to more complex ones that need the use of specialised equipment and time-consuming disassembling. Fixes might become a sloppy mess, so keep a bucket, some rags, and a sponge nearby. If you want to learn more about unclogging a drain, check out Lowe’s Drain Cleaner and Drain Opener Buying Guide.

Caution When using any chemical drain cleaning or drain-opening instrument, make sure to put on the proper protective gear and follow the manufacturer’s safety and usage instructions carefully. When removing blockages from older pipes, proceed with caution. Some chemicals and tools may not be appropriate for this application. A professional plumber should be called for help if you have old or damaged pipes, are concerned about damage, or are unable to clear a blockage yourself.

Methods for Clearing a Clog

• One typical clog in the bathroom may be cleared by removing hair that has accumulated around a pop-up stopper or strainer. Adrain stick is good for clearing blockages in a P-trap or S-trap that have formed as a result of hair growth. If the clog does not extend too deep into the pipes, an aplunger can be used to clear it. Sink trap cleaning eliminates obstructions produced by accumulation — such as soap or oil — or an inadvertently dropped object — such as a toy. It is possible to remove clogs deep in drain pipes using an auger (also known as a plumbing snake or a flat sewer rod). A high proportion of lye, bleach, or sulfuric acid is used in chemical drain cleaners, which helps them to soften and dislodge obstructions.

Instructions and recommendations on how to use each of these solutions may be found in the sections below.

Cleaning Strainers and Stoppers

In many cases, strainers and stoppers are the root of the problem.

How to Unclog a Bathroom Sink or Kitchen Sink Using a Drain Stick

A drain stick is a low-cost instrument that may be used to unclog various obstructions in a short period of time.

Using a Plunger

The tactics outlined here can help you make a plunger more efficient.

How to Unclog a Sink P-Trap

A tenacious clog in the P-trap of a sink can develop over time.

Knowledgeable Hints and TipsSome P-traps are equipped with a clean-out plug located at the foot of the bend, which allows you to clear a clog without removing the trap. Remove the plug, insert a drain stick, and press it around the bends of the trap until it is well seated.

Using an Auger or Flat Sewer Rod

Clogs in a sink, shower, or tub drain that are difficult to remove may necessitate the use of an auger or a flat sewer rod.

Using a Chemical Drain Cleaner

If you opt to use a chemical drain cleaning, be certain that you select the proper one.

Tips to Prevent Drain Problems

• Keep coffee grinds, grease, or any other item that might clump or harden from going down the drain. When utilizing a garbage disposal, be sure to pump lots of cold water through it to flush food particles down the drain. Strainers and pop-up stoppers should be cleaned on a regular basis. It may be necessary to use a drain maintenance treatment, which is designed to eliminate buildup in pipes. Check to see whether it is compatible with your system. If you have a septic tank, you should have it inspected by a professional every two to three years, or as often as is necessary in your region.

It’s Beneficial to Know Rooftop plumbing vents pump air into the pipe system, allowing drains in the home to work as they should. In the event that a vent is covered by leaves or other debris, drains may flow more slowly or perhaps cease to function entirely. A blocked plumbing vent may frequently be unclogged with the use of an auger. If you’re not comfortable working from a ladder on the roof, get a licensed plumber.

Clogged Drain or Clogged Septic Tank?

Robs Septicon is the author of this piece. Postings under Uncategorised A blocked septic tank can cause difficulties that are quite similar to those caused by a clogged drain. Knowing the difference between the two might assist you in taking care of your house. Here’s all you need to know about the situation. When a septic tank overflows, why do drains become clogged? The septic tank is a holding tank that is located underground. All of the wastewater from the house flows into the septic tank, which steadily fills up with garbage over time.

• Towards the top of the tank, there is a pipe that flows into the yard, into an area known as the drain field, where the tank is located.
• The dirt filters the water and kills the bacteria that are there.
• It is possible for the septic tank to fill up without any water draining out if the line feeding into the drain field becomes plugged.
• As the water rises via the main line, the capacity of fixtures in the house to drain correctly diminishes.
• The drains will become sluggish if the septic tank is just half blocked, as the water strains to make its way down into the septic tank.
• What Are the Signs of a Septic Tank Clog?
• It might be difficult to detect the difference at times.

Due to the fact that they are the most closely associated with the septic tank, the lower drains in the home will be affected first when the septic tank overflows.

In addition to being more sluggish, they may begin to produce unusual noises, such as gurgling sounds, as they age.

Local clogs often only impact a single fixture or a small number of fixtures that are linked to it.

If all of the other fixtures in the house are operating properly, this is an indicator that there is a blockage in the house rather than in the septic tank itself.

A blockage in a septic tank should not be repaired by someone who has just rudimentary expertise or who lacks the necessary instruments.

In certain cases, you may be able to address the problem yourself if you suspect that the blockage is in the pipe rather than in the septic tank.

Allow for an hour or two for the mixture to settle in the pipe before using it.

Depending on how large the blockage is, this may be sufficient to empty the pipe.

An auger is made out of a long, rigid cable with a pointed, twisting end at the other end.

A plumber may be required if neither of these approaches proves effective in clearing the clog from the drain.

Chemical drain cleaners have the potential to harm beneficial microorganisms in your septic tank, which might lead to another clog in the future.

Clogs in septic tanks can arise for a number of different causes.

Many septic tanks require pumping every three to five years, depending on the size of the tank.

Exactly What Should You Do If You Suspect You Have a Septic Tank Issue?

An inspection by a septic tank firm will allow them to determine whether or not the tank needs to be drained.

Rob’s Septic Tanks, Inc. can provide you with further information on clogs and septic tanks. We’ll be pleased to answer any questions you have and provide you with further information.

Options for your Clogged Drain: Snaking VS. Hydrojetting – Septic Maxx

You may only have one sink or one shower blocked, and your clogged drain may be a result of this singular issue. If, on the other hand, you notice that various drains throughout your home are clogged or backed up, it is possible that there is a larger problem with the connections in your septic system. While there are a variety of options for dealing with these issues, two of the most popular are referred to as Snaking and Hydrojetting, respectively.

Snaking

Individually blocked drains are most usually treated using snaking, which is a procedure that is most commonly employed for them. When a plunger isn’t enough, the plumber’s snake cable is the next best thing to have around the house. In order to complete the procedure, you must first disconnect the pipes that are linked to your drains and then use a snake cable to clear out whatever is creating the obstruction. While it is possible that the drain obstruction is in the home plumbing, if the blockage is detected between your house and your septic system, moving the snake toward the tank increases the danger of injuring the inside of the tank.

Hydrojetting

It is possible to use hydrojetting to remove any blockages in the septic field by inserting a high-pressure stream of water into the system. In more extreme circumstances, where the obstacles prevent sewage from flowing to a full septic field, resulting in drain difficulties and clogs throughout the house, this alternative should be considered. Hydrojetting is a potentially dangerous procedure since the high water pressure might do additional damage to the line rather than simply cleaning it.

The Verdict

When it comes to addressing drainage problems, both snaking and hydrojetting are feasible solutions. However, they are both time-consuming and sophisticated processes that demand an experienced touch. As they say, prevention is better than cure, and for the least expensive tank maintenance, it is advisable to use a solution that cleans out the particles that cause blockage in the first instance. If you are already experiencing clogging problems, Septic Maxx can help by reducing the accumulation of debris and encouraging appropriate drainage, resulting in a system that runs more smoothly.

SEPTIC PROBLEMS THAT CAN MIMIC DRAIN CLOGS

Your bathroom drains may be running slowly, and you may be thinking pouring some chemical drain cleaner down the drain to clear the clog. However, in these situations, rather than relying on potentially harmful drugs, it is always preferable to consult with medical specialists for a diagnosis. Instead of a simple clogged drain, you may be dealing with a plumbing vent problem, a sewer line problem, or a septic system problem instead. Learn about three septic issues that might manifest themselves in ways that are similar to drain obstructions.

• An entrance baffle and an output baffle are standard features of a septic tank.
• The intake baffle assists in the smooth entry of wastewater into the tank.
• This form of obstruction, like a drain clog, will cause drains to slow down or stop completely.
• 2.
• In addition, there is the pipe that runs from your house to the septic system.
• In addition to blockages, this main line is subject to earthquake damage, damage from huge machinery being driven over the region, and tree root damage, no matter what material it is constructed of.
• Failure of the Drainfield It is possible that some homeowners are unaware that septic systems have a limited lifespan.

For this reason, you must have a reserve leach field site set aside when installing your sewer system, as mandated by federal laws.

One occurs when a large amount of solid waste is introduced into your system, causing them to get clogged to the point where they must be replaced.

Compaction is another issue that can cause a leach field to fail prematurely if it is not addressed.

Due to the fact that the field’s functioning is dependent in part on bacteria that require air in the soil to survive, this might render the region unusable.

Some of the symptoms of these three septic illnesses might be mistaken for those of a normal plugged drain in some cases.

Consequently, if you feel your drains are slowing down, get a professional to come out and take care of the problem.

Contact Upstate Septic Tank, LLC as soon as possible if you are in need of a diagnostic visit, sewer line cleaning, or a septic system cleaning and pumping. We’ll be pleased to assist you in keeping your septic system in the best possible condition.

How to Clear a Clogged Septic Line

If you have ever had to deal with a clogged drain, you are aware that the cleanup procedure is anything but enjoyable. Sewage line blockages are often caused by an obstruction in the pipes or when the septic pipe levels out and prevents gravity from conducting its work.

Symptoms of a Clogged Drain

In virtually all cases, when you have a clogged drain or pipe, you will feel at least one of two symptoms. An foul odor emanating from the sink, toilet, drain, or other plumbing fixture almost always indicates the presence of something as unpleasant impeding the course through the pipes. In sinks, it is almost always food that is the source of congestion. In toilets, it’s possible that someone flushed something they shouldn’t have, or that they truly emptied and should have used a mid-session flush instead of the first flush.

2. Water Going the Wrong Way

Water is intended to wash down the drain and not come back up, so it makes sense that it would. Some obstruction is causing your sink or shower to take an excessive amount of time to train. Even though a blocked line is typically caused by anything that has been flushed down the toilet, the source of the problem may be located deep inside the heart (and pipes) of the septic system itself. It is possible that tree roots are causing your septic system to back up. Obviously, if this is the case, you’ll want to consult with a specialist right away.

It is possible for your pipes to freeze during the winter months if they are not buried at the right depth.

Tips for Clearing a Clogged Drain

Before you call a septic company, there are a few things you may do to try to unclog your drain on your own that may be successful.

1. Avoid cleaners with chemicals

Chemical-laden cleansers have a tendency to degrade the enzymes in your septic system, which are designed to aid in the degradation of waste. Instead, use a drain cleaner that is suitable for septic systems and does not include any harsh chemicals. A professional cleaner should always be kept on call in the event of an emergency.

2. Pour hot water down the drain.

The surge of hot water, particularly in kitchen sinks, is typically sufficient to dislodge or dissolve any clog in the pipes. Check to see whether boiling water might be of assistance before seeking expert assistance.

3. Use baking soda and vinegar.

If water alone is ineffective in dissolving the obstruction, a baking soda and vinegar reaction may be used to achieve success. Pour a couple spoonfuls of baking soda down the drain, followed by a cup of vinegar, then flush the toilet. The fizzy explosion aids in the breakdown of waste and the restoration of normal flow. The fact that you are unable to unblock the blocked drain by yourself might indicate that the problem has reached a deeper level. An impediment other than food might be blocking one or more septic system pipes, which could be collapsing.

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area.

Septic systems are something we are very familiar with, and we can handle just about any septic problem, including a clogged drain or septic line, thanks to our 40 years of experience. If you have any reason to believe that there is an issue with your system, please contact us.

who should you call for septic issues?

Septic tank cleaning and septic tank pumping services are provided by Norway Septic Inc., a service-oriented company devoted to delivering outstanding septic tank cleaning and septic tank pumping services to households and business owners throughout the Michiana area. “We take great delight in finishing the task that others have left unfinished.” “They pump, we clean!” says our company’s motto. If you believe that your septic system is having troubles, or if you require septic replacement components such as septic filters, please contact us right once.

Our affiliate connections to these items generate a small profit for us if you decide to purchase them via our links.

How to Unclog Drains With a Product That is Safe for Septic Systems

A blocked drain is something that almost everyone has experienced at some time in their lives. However, every time the water in the toilet rises or the sink takes an eternity to drain, it may be a mentally exhausting experience. Much more aggravating is attempting to find out how to defuse the situation in a manner that is “septic safe.” If you have a septic tank, this may be even more difficult. Showering with two inches of dirty water building up at their feet because the water won’t drain properly is not something anyone likes to do.

Beware of popular drain cleaning and drain opener goods available at your local department or hardware shop, since they may contain harmful chemicals.

Why are chemical drain openers harmful to septic systems?

a septic system is a living ecosystem of bacteria and enzymes that decomposes all organic material (also known as “waste”) and separates and filters out all inorganic stuff from wastewater that drains into the soil. When an excessive amount of inorganic waste is dumped into your tank on a regular basis, this mechanism might become compromised. The use of antibacterial or chemical drain cleansers down the toilet while trying to clear your tank is one of the worst things you can do while trying to clear your tank.

It is indeed true that eliminating germs will have a negative impact on your septic system.

This is what you really want to look for.

While septic safe suggests that the product will not damage the components used in septic tank construction, biodegradable signifies that the formula will breakdown naturally and will not affect the surrounding environment.

The perfect drain clog removal product for septic systems/septic tanks?

Now that you are aware of the two most important characteristics to look for in a drain cleaner or drain opener. Using Green Gobbler’s Drain Opening Pacs, you may liquefy hair, soap scum, and other organic pollutants with a biodegradable composition. It also comes with a money-back guarantee, which means that if the device fails to unclog your slow drains, you will receive your money back. Talk about a win-win situation.

Are Baking Soda and Vinegar Safe for Septic Systems?

The answer to this question is an unequivocal “yes!” We get a lot of inquiries regarding cleaners and best practices in septic systems, and this one is simple — the answer is an unequivocal “yes!”

Baking soda and vinegar are safe

Using baking soda and vinegar as drain cleaners is both safe and effective, and, best of all, they are completely safe for your septic tank and drain field to use. Bleach and ammonia-based cleansers (which include most of the products in the cleaning aisle of big-box retailers) can be hazardous to the beneficial microorganisms in your septic tank. Instead of killing the beneficial bacteria in your tank, baking soda and vinegar help to keep your septic system running efficiently for far longer periods of time and with less maintenance necessary.

How to use baking soda and vinegar

Consequently, you may be asking how to clean with baking soda and vinegar in your home environment. Here are a few of our favorite ways to utilize these powerful and economical cleansers in your kitchen and bathroom, in no particular order: Drains that become clogged are a big nuisance. Even if your septic system is not backed up, it is crucial to keep an eye out for indicators of a problem. Baking soda may be used to clear tenacious filth from your pipes, which may be causing minor backups. A couple of teaspoons of baking soda and a cup or two of boiling water should suffice (you can also add white vinegar for a bit more punch).

It’s an excellent method to avoid the high cost of a plumber’s visit as well as the inconvenience of blocked drains – so give it a shot first!

These work as a toilet bowl cleaner as well

These natural cleansers are also effective as a toilet bowl cleaning, which is rather remarkable! For this reason, a combination of baking soda and liquid castile soap is recommended by the manufacturer. You may have heard of castile soap, but you may not be aware of the reasons behind its cult-like appeal. Many people swear by the cleansing abilities of castile soap, as well as the fact that it is non-toxic – despite the fact that it is a vegetable-based soap that is devoid of animal fats and synthetic additives.

To clean a toilet bowl, liberally sprinkle it with baking soda and flush it down the toilet.

When used as a scouring agent for sinks, showers, tubs, and countertops, baking soda is quite effective.

You won’t even miss the toxic conventional cleansers you used to use after adding basic white vinegar and liquid castile soap to your cleaning arsenal. The majority of them were steadily destroying your septic system while you were using them.

You don’t have to harm your septic tank

Cleaning our kitchens and bathrooms is a necessary, but it does not have to be done at the expense of your septic system. Thank you for reading, and please do not hesitate to contact us at any time if you have any septic tank inquiries or to arrange a septic tank pumping or cleaning. We’re more than delighted to assist you.

How to Unclog Your Septic Tank

Documentation Download Documentation Download Documentation In the event that you have slow drains, pooling water in your yard, or foul aromas near your septic system, it is possible that one of the pipes has become clogged. Fortunately, there are several methods for removing blockages from your sewage system that do not require the services of a septic service specialist. To begin, search for any apparent obstructions inside your septic tank and try if you can drive them out with a little force.

Following the removal of the blockage, be sure to properly maintain the septic system in order to keep it clean!

1. 1 Check the inflow pipe by lifting the access cover of the tank that is nearest to your residence. The plastic or concrete cover in your yard that is closest to your house should be the first place you look. Carefully raise the cover of the tank up and away from the tank so that you can see what’s within. If you notice a white or green pipe at the end of the tank closest to your home, look for anything that could be blocking the pipe’s outlet. If there is, it is possible that the blockage is the source of the problem.

• Assuming the water level is below the level of the entrance pipe, the blockage might be located in the drain pipe that runs between the septic tank and your residence. If the water level is higher than the inlet but there is nothing blocking the end of the pipe, the clog is most likely in the leach field
• However, this is not always the case. It may be necessary to dig up the access lid with a shovel or raise it with a pry bar in order to get access.

If you are unable to locate the access lid for your septic system, consult your house’s as-built plans, which are blueprints prepared after your home is constructed, or a septic service if you are unable to locate the access lid for your septic system. 2 If the scum is trapped at the end of the input pipe, use a pole or a stick to push it out of the way. The scum layer is composed of solid waste that accumulates on the surface of the septic tank. Make use of a long, strong piece of wood or metal to slide the scum down or to the side of the entrance pipe as needed.

• If you are working in your septic tank, you should always wear gloves to prevent bacteria and waste from getting on your hands. If water starts to flow out of the pipe after you’ve pushed the scum out of the way, you’ve successfully eliminated the clog.

Advertisement number three If the blockage is deeper inside the pipe, use the pole or stick to probe the end of the pipe. Insert the end of the stick or pole you’re using as far as it will go into the end of the pipe you’re working with. Make use of the end of your probe to scrape the edges of the pipe and draw any waste from the pipe into the tank. Even if the clog is at the very end of the pipe, you should be able to dislodge it and get the water flowing once again. If water does not flow out of the pipe, the blockage is likely to be deeper within the pipe itself.

• Depending on where the pipe is located, you may or may not be able to insert your probe into the pipe.

4 Disinfect any instruments you used by mixing a 5:1 solution of water and bleach together. Stir up 1 part chlorine bleach and 5 parts clean water in a big bucket until the chlorine bleach is completely dissolved. Immerse your tools in the solution and allow them to soak for around 5 minutes to destroy any germs that may have remained on the surface. When you’re finished, drain the liquid back into your septic tank.

• If at all possible, take a shower or bath as soon as possible after working on your septic tank
• When you wash your garments, use bleach or laundry sanitizer to ensure that no bacteria is left on them after washing.

5 If you were able to resolve the issue, replace the access lid on the septic tank.

Lift the lid and place it over the opening that leads into the septic tank to prevent it from closing. Slowly drop the lid down until it fully covers the hole and does not move around any more. In order to insert a mechanical auger into the clogged pipe if you haven’t already, leave the lid off.

• Never leave the septic tank door open while you aren’t working on it to prevent anything from falling into the tank.

6 Make use of a reputable service. If your tank was completely filled, you should pump it within 5 days. It is conceivable that your tank will back up again even after you have removed the clog. This is especially true if your main tank is completely full to the entrance line. Inform septic service personnel that the scum level has reached the pipe by contacting them through telephone or email. It is best to schedule them within the following 5 days, otherwise you will increase the likelihood of septic fluid returning up the drainpipes.

• Having a septic tank pumped typically costs between $75 and $200 USD, depending on the size of the tank and the amount of waste that has to be removed. Every 3–5 years, or whenever the tank becomes full, have your septic tank cleaned and emptied.

1. In order to get to the inflow line, you must first remove the septic tank access lid that is closest to your residence. Because the intake pipe is more likely to be located on the access lid nearest to your home, if your septic tank has multiple access lids, select the one that is closest to your home. Using your hands, lift or pull the tank’s cover off and set it aside while you continue to work. Locate a white or green pipe that protrudes from the side of the tank that is closest to your house on the interior of the tank.

• If you are unsure about the location of your tank’s access lids, consult your home’s as-built plans or consult a professional service.

2 Using a mechanical auger, feed the cutting blade into the end of the obstructed pipe until it is fully engaged. A mechanical auger is comprised of a long metal cable that is inserted into your pipes and equipped with a revolving bit that cuts through the obstruction. Begin at the end of the blocked pipe or at an access point for the pipe, such as a cleanout port, to unclog the blockage. Placing the cutting blade of the auger inside the obstructed pipe and pushing the line in around 1–2 feet (30–61 cm) can clear the obstruction.

• It is possible to purchase a mechanical auger either online or from a local hardware shop. Investigate whether your local hardware shop provides equipment rentals to see if you can borrow an auger for the day without having to pay the whole price

3 Before you turn on the auger, make sure you have on your safety glasses and work gloves. Because mechanical augers feature spinning and moving elements, it is important to wear eye protection to avoid injuring yourself if you lose control of the machine while working. Wearing heavy-duty work gloves can help you prevent spreading germs and being harmed when handling the line. Ensure that the auger is plugged into an electrical outlet and that the switch is in either the On or Forward position.

• It’s possible that you’ll require an extension cord to connect the mechanical auger. You should never use the auger without wearing gloves or wearing safety eyewear since you might suffer a serious injury. Because the auger would spin violently if you start it with the cutting end outside of the pipe, you should never do so.

4 Continue to feed the auger farther into the pipe, allowing it to break apart the blockage as it goes. Holding the auger’s line with both hands, guide it into the pipe until you encounter resistance if necessary. Try rotating the line in your hands to see how far it will travel within the pipe if the resistance feels substantial. It is possible that it has encountered a curve in the pipe. To drive the obstruction apart if this is not possible, use short, back and forth strokes to push and pull the auger.

• If you successfully clear the clog, water will begin to flow through the pipe again while you are still inside it with the auger. Mechanical augers are available in a variety of lengths, so if the one you’re currently using isn’t long enough to reach the blockage, consider renting the next largest size.

Tip: Always keep at least one hand on the auger’s line while it’s operating to ensure that it doesn’t spin or twist while you’re trying to feed it. 5 Before removing the auger from the pipe, be sure it is turned off. Make sure that the auger’s power switch is in the Off or Reverse position so that you can easily remove it from the ground. With both hands, gently guide the auger’s line back into the container, then slowly bring it back through the pipe to the other end. Using a hose or paper towel, carefully remove the auger’s end from the pipe and clear off any dirt or trash that has become lodged on the end of the auger’s end.

• It is not advisable to remove the auger from the pipe while it is still operating since it might cause injury. Remember not to touch the auger’s line with your bare hands because it has just passed through a pipe that contains garbage and potentially deadly bacteria.

6 The tools should be cleaned with a solution made up of 5 parts water and 1 part bleach. Stir the solution together by pouring 1 part chlorine bleach and 5 parts clean water into a bucket and mixing thoroughly.

Clean the end of the auger with a cleaning rag to eliminate any germs that may have remained on the surface and avoid contaminating other parts of the machine. When you’re finished, drain the solution into your septic tank.

• Don’t flush the cleaning solution down the toilet since it contains bacteria from your septic tank that are dangerous.

7Remove the septic tank’s cover and replace it. Lift the lid off the ground by grabbing it by the handles or the sides of the container. Lift and carefully drop the lid back onto the opening going into your sewage treatment system until it is completely enclosed. Make sure the lid does not slip or shift in any way, or otherwise it may break loose and fall off the septic tank. Advertisement

1. 1 Other than water and natural garbage, avoid dumping anything else down your drains. Water, human waste, and toilet paper are the only things that septic tanks are designed to handle
2. Thus, any additional products can cause the entire system to get clogged. To avoid clogging pipes, place paper towels, wet wipes, food scraps, and other solid waste in the ordinary garbage instead of in the recycling container. Inform other individuals in your home on what they may and cannot flush down the toilet in order to prevent clogging of the pipes.

• Using strong chemical cleansers down your drain is not recommended due to the possibility that they can destroy the natural bacteria in your septic tank that is responsible for decomposition of solid waste. You should never pour cooking oil down the drain because it might harden in the pipes and cause blockages that are difficult to clear.

As a reminder, you do not need to add any additional natural enzymes or bacteria to your septic tank in order for it to properly break down solid waste. Any enzymes that are introduced will be ineffective compared to the enzymes that naturally reside in the tank. 2 Reduce the amount of water you use in your home so that the septic system can drain correctly. Avoid running water in your home until absolutely necessary, since doing so may cause the tank to fill up too rapidly and overflow. Use as little water as possible when bathing or cleaning, so that you only have as much as is necessary at any one time.

• It will also save you money on your utility bills if you keep your water consumption to a minimum.

3 Avoid driving or planting over the area where your septic tank is located. Heavy weight can cause pipes going from your septic tank to collapse or break, so if at all possible, avoid driving over the region in a vehicle as much as possible. Plant roots can also grow into the pipes or septic tank, causing them to clog more quickly than they otherwise would. In order to prevent roots from growing within your septic system, you should put trees or plants at least 20–30 feet (6.1–9.1 meters) away from your sewage system.

• Even if you use a mechanical auger to remove the roots out of your pipes, the roots will come back if the problem is not addressed. Root barriers purchased from gardening supply stores destroy roots on touch and can help to prevent overgrowth in your septic system. To protect your septic system from pipes, dig a trench around it that is 2 feet (61 cm) deep and 3 feet (91 cm) away from them. Make sure that you place the root barrier in the trench vertically before you fill the trench back up with earth.

4 Improve drainage by cleaning the effluent filter located on the outflow pipe. The effluent filter is a plastic cylinder that is installed in the exit line of your septic tank to prevent solid waste from escaping. Make sure the tank closest to your home has an access cover that can be opened. Look for a vertical white or green pipe that holds the filter and protrudes through the top layer of scum on the interior of the filter. Remove the filter from the vertical pipe by pulling it straight out and rinsing the waste back into the tank using a hose.

• Not every septic system will be equipped with an effluent filter
• However, most will. Check your filter every time you have your tank pumped or examined to ensure that it does not become clogged.

5. Have a professional inspection of your septic tank performed once every three years. Septic tanks typically take 3–5 years to fill, however this might vary based on the size of the tank and the quantity of water it receives. Consult with a professional provider to have the water levels and pipes for your system checked to determine if any adjustments are necessary. If the provider has any issues, you should solve them as quickly as possible to avoid having a malfunctioning septic system later on.

• Question What is the location of your septic tank? David Balkan is a writer who lives in New York City. A professional plumber and the CEO of Balkan Sewer and Water Main David Balkan is a licensed professional plumber who also serves as the CEO of Balkan Sewer and Water Main Service and the President of Balkan Sewer and Drain Cleaning, among other positions. With over 40 years of experience as an active owner of these businesses, David is well-versed in the challenges that arise with water service lines, sewers, and drain lines. David has served on the Executive Committee of the Sub Surface Plumbers Association of New York for more than 30 years and is now the Chairman of the Master Plumbers Council’s Committee on Plumbing. As a result of his expertise and solution-oriented approach, Balkan Sewer and Water Main Service has grown to become the biggest and most trusted sewer and water main service in New York City, and the recipient of the 2017 Angie’s List Super Service Award. Answer from a Professional PlumberCEO of Balkan SewerWater MainExpert Because they have to be pumped out on a regular basis, they usually have clean outs that are visible to the public. The quickest and most straightforward method is to discover your major house trap or clean out. Typically, the first tank would be 15 feet or somewhat more away from the outer wall of your home because it is frequently the very minimum distance that is needed by building codes. Once you’ve identified your primary cleaner or trap, you may utilize the instruments that experts employ. Their electronic pipe tracing equipment may be inserted into your main sewer line, allowing them to find and locate where the tanks are located. Question Is it harmful to my septic tank to use too much Rid X at one time? Using excessive amounts of Rid X will have no negative consequences. Question Is it possible that heavy rains or storms might cause difficulties for my septic system? Daniel and Robin KirbyAnswer from the Community Identifying a concave indention over your field lines or over your septic tank is important if you’re experiencing troubles every time it pours rain. Because of this, water can accumulate directly on top of your field lines, resulting in an overflowing sewer system. To correct it, just fill up the sunken sections with concrete. A short hill in the middle, sloping down to normal grade on both sides of the field line for approximately two feet, may correct this
• Nevertheless, Question Is there a natural enzyme, such as dry yeast, that may be utilized instead of paying for expensive enzyme treatments or having a septic system that has only been used by one person pumped out? The man that came to service our septic system had a lot of expertise. He informed me that we could save money by simply adding a package of standard yeast to the mix once or twice a month, rather of buying special yeast. I buy the store brand (which costs 79 cents a packet) and flush a couple of packets every month down the bathroom sink. That is all there is to it. Question What is the best product to use in the toilet to protect my septic system from damage? Daniel as well as Robin Kirby Community Answer Although there is enough of food for your bacteria in a septic tank, it dies due to a lack of oxygen, therefore if you add additional bacteria, they will die practically as soon as they are flushed out with the wastewater. A treatment plant, where oxygen is fed into the tank, may increase the number of bacteria from the millions that exist in a septic tank to billions when both aerobic and anaerobic bacteria can grow! Having said that, treatment plants should be drained out more frequently than septic tanks, according to industry standards. Question In the case of a septic system, what can I use to unclog a clogged sink drain? For myself, I prefer to use a plastic drain snake. It is a plastic ribbon with little barbs that grip anything is obstructing your drain and pulls it out of the way (usually hair). While they are inexpensive and quite effective, they are also a bit dirty
• Question When my septic tank becomes clogged with oil and hair bleaching chemicals, what should I do to clear it out? No oil or grease should be flushed down the toilet or into the septic system. Put it in a grease can and toss it out of the window. As far as bleach is concerned, it destroys the microorganisms that your septic system requires in order to function properly. You might wish to look into septic-safe items
• They are available.

Inquire about something There are 200 characters left.

Include your email address so that you can be notified when this question has been resolved. SubmitAdvertisement

• Unless you are skilled in septic tank unclogging or there is significant damage to the pipes, you should hire a septic specialist to conduct the necessary repairs for you to guarantee that everything is in compliance with the law. When working on your septic tank, always use protective eyewear and disposable gloves to prevent contamination.

Advertisement

Things You’ll Need

• Hose
• Paper towel
• Mechanical auger
• Safety glasses
• Work gloves

About This Article

The writers of this page have together authored a page that has been read 314,294 times.

Did this article help you?