You can locate the lid of your septic tank by poking the ground every few feet with a metal probe. Lids can be buried up to a foot deep on average, so be sure to investigate any bumps that may indicate something is buried underneath.
How far down is a septic tank lid?
Often, septic tank lids are at ground level. In most cases, they have buried anywhere from four inches to four feet underground.
Do septic tanks have two lids?
Locate The Lid A septic tank installed before 1975 will have a single 24-inch concrete lid in the center of the rectangle. A two-compartment tank installed after 1975 will have two lids of either fiberglass or polyethylene, centered at opposite ends of the rectangle.
Will metal detector find septic tank?
If it’s Concrete or Steel, Use a Metal Detector. Based on your conclusions in Step 3, if your septic tank is likely made from concrete or steel, a metal detector can make the task of locating it much easier. But not just any metal detector will do.
How do you hide a septic tank cover?
The Do’s For Hiding Your Septic Tank
- Plant tall native grasses with fibrous roots around the opening to conceal the tank lid from view.
- Place a light statue, bird bath or potted plant over the septic lid.
- Septic tank risers and covers are an alternative to concrete and blend into green grass.
Are septic tank locations public record?
Contact your local health department for public records. These permits should come with a diagram of the location where the septic system is buried. Depending on the age of your septic system, you may be able to find information regarding the location of your septic system by making a public records request.
Should septic tank lid be sealed?
Like wells, septic systems have problems if they are not sealed from outside surface water. Most septic systems rely on buried pipes to get rid of the fluids. The lid covers should fit tightly — if they don’t, a company that specializes in septic repairs should be called to fix them.
Why does my septic tank have 1 lid?
But seeing one lid on the ground doesn’t necessarily mean that you have one lid – the other might be buried few feet away from the one you saw and so you will have to dig to access it. Most septic tank lids are made of concrete. Fiberglass and polyethylene lids are not very popular because they break easily.
Can you use a metal detector to find sewer lines?
Using a Plumbing Pipe Detector to Locate Underground Pipes. As a property owner there will be times when, for a variety of reasons, you will need to locate underground metal objects. For example, using a pipe locator metal detector you can easily pinpoint leaking underground pipes quickly.
Are septic tanks metal?
Steel Septic Tank—Steel septic tanks are the least durable and least popular tank option. Designed to last no more than 20-25 years, they can be susceptible to rust even before that. Steel top covers can rust through and cause an unsuspecting person to fall into the tank.
Are septic tanks made of metal?
The majority of septic tanks are constructed out of concrete, fiberglass, polyethylene or coated steel. Typically, septic tanks with a capacity smaller than 6,000 gallons are pre-manufactured. Larger septic tanks are constructed in place or assembled on-site from pre-manufactured sections.
How to Find the Lid on a Septic System
All septic tanks eventually fill with sediments and must be pumped out on a regular basis in order to remain in excellent functioning order. If the tank’s lid is not on a riser at ground level and you are not the home’s original owner, you may be unable to determine where the lid is located. A typical septic tank is 4 inches to 4 feet underground, with all of its components, including the cover, buried between 4 inches and 4 feet underneath. This is true regardless of whether the septic tank is equipped with special risers that keep the lid flush with the surface of the ground.
Consult A Map
First, choose with the most straightforward choice. The installation of septic tanks at all locations is recorded in most counties’ permission records, which are kept on file for future reference. Typically, this will include a schematic indicating the placement of the tank on the land, as well as certain dimensions that will allow you to measure to the precise site of the tank. If your tank was placed before your county made it a requirement to record the location of such tanks, you may find yourself with nothing to show for your efforts.
Search For A Sign
Septic tanks are placed in such a way that they are as unnoticeable as possible on the land. After the grass has grown back after installation and some time has passed, it is possible that just a few visual indications will remain. Pay particular attention to the contours of your yard for any inexplicable high or low points that might suggest the presence of an underground storage tank.
Follow The Pipe
Installation of the septic tank takes place along the sewage line that runs from the house into the front yard. Locate the 4-inch sewage pipe at the point where it exits the home in the basement or crawl space, if it is there. Locate the same spot outside and make a note of it. Insert a thin metal probe into the earth, identify the 4-inch sewage line, and follow it across the yard, probing every 2 feet, until you reach the end of the property. Septic tanks are required to be at least 5 feet apart from the home in all states except Alaska.
Whenever the probe makes contact with flat concrete, fiberglass, or polyethylene it indicates that the tank has been located.
Locate The Lid
The majority of septic tanks are rectangular in shape and measure around 5 feet by 8 feet. Investigate the tank’s circumference to determine its boundaries and outline the rectangle’s boundary using a pencil. A septic tank that was built before 1975 will have a single concrete lid that is 24 inches in diameter in the center of the rectangle. If the tank was built after 1975, it will have two covers made of fiberglass or polyethylene, centered at the ends of the rectangle and centered at the ends of the rectangle.
It should be possible to uncover the lid or lids by digging with a spade in specific spots, depending on when year the tank was constructed.
Call A Professional
Opening a septic tank is a job best left to the pros once the lid has been discovered. Concrete septic tank lids are extremely heavy, and many require the use of lifting tools to remove them completely. An open tank has the potential to release toxic gases. Anyone going around on the property who comes into contact with an exposed septic tank might be in risk. Because of the noxious vapors present in an open tank, falling into one can be lethal.
Mark The Spot
Make a note on the ground near where the tank was pumped by a professional and the lid was buried to serve as a reference in the future. In order to keep track of where you are, you should choose a hefty circular patio tile that is embedded in the ground. Additionally, draw your own map of the area and store it with your other important papers.
How to Find a Septic Tank Lid
Septic tanks are installed on certain properties, and it is a good idea to be aware of where your tank is located. The first stage will be to locate the septic tank lid, whether it is to prevent damage to the tank and drain field from heavy equipment, to locate the tank for excavating reasons, or to conduct a self-inspection of the septic tank. We generally give this service to our customers while doing inspections or septic tank pumping, however we understand that some homeowners may prefer to discover it on their own.
Use the septic system plans if you have them.
The quickest and most straightforward method of locating a septic tank lid is to consult the original septic system drawings. The septic system drawings will include the position and dimensions of the tank in relation to the house. Simply measure the measurements of the septic tank lid using a measuring tape to determine where it is located. When it comes to septic system plans, it’s probable that your local board of health will have a copy if for some reason you don’t have access to them. It is common for the lid to be buried beneath the grass, necessitating some probing and digging.
The sewer pipe can be your guide to finding the septic tank lid.
Sometimes it’s difficult to locate septic tanks when using these blueprints, or you may not have a copy of your septic plans on hand. The sewer pipe in your basement is your next best chance if you can’t locate it. This is the pipe that transports all of the waste water from your home to the sewer. Take note of the location of the pipe in relation to the ground level. this will give you an idea of how deep your tank will be buried under the earth. In addition, you will need to determine how many feet the pipe is away from the inner corner of your residence.
Make your way to the location where you believe the drain pipe is exiting the building. At that position, your septic tank should be around 10-15 feet away from the structure, according to the manufacturer.
Use caution when opening a septic tank lid.
Opening the septic cover is the first step in checking the levels of your septic tank on your own if you’ve managed to discover it. Sitting septic tank covers, particularly the older concrete ones, are extremely heavy and difficult to shift. The cover may feature hooks or grips that make it simpler to raise, or you may need to use a tool such as a shovel as a lever to open it. Older septic tanks should be handled with caution since the lids of older septic tanks can grow unstable over time and are more prone to breaking.
A anyone falling into this tank, especially a child or a pet, would be in grave danger.
Because the exposed hole in the ground might be easily missed, never leave the open tank alone, even for a little moment of reflection.
Measure the Levels of Your Septic Tank Yourself
While we provide a handy service to check the levels in your septic tank, you may also do so by yourself if you choose. To measure the amount of sludge, as we discussed in our previous piece, you can use a long stick or a two by four with an adhesive strip attached to one end, or you can acquire a special measuring equipment known as a “sludge judge.” Because the average septic tank contains 4-5 feet of water, it’s preferable to use a measuring stick that’s at least 7 feet long. If necessary, lower your handmade measuring stick or sludge judge down into the septic tank after you’ve opened the lid and maintained perfect verticality of the stick.
As soon as you feel the measuring stick make contact with the bottom of the tank, you may bring it back up and measure the amount of sludge by counting the number of inches of black material that is staining the stick.
As soon as you have an understanding of the levels in your septic tank, you can assess whether or not your septic tank requires pumping.
Need help? Call Grant Septic Tech.
We are well aware that doing things oneself is not always simple or straightforward. But that is precisely why we are here! Our family has been in the septic system business for more than 60 years, and we’ve seen just about everything. Alternatively, if you’ve had difficulties with any of these processes (or simply want to avoid the mess), simply give us a call – we know where to look for a septic tank lid and can complete a comprehensive check for $127. There will be no fee for the inspection if we discover that your septic tank requires pumping while we are there; you will only be responsible for the cost of the septic tank pumping while we are there.
To schedule a service call, contact (508) 529-6255 or book a service call online. We provide service in a wide range of places around Massachusetts. Here’s where you can see if your town is included in our service region.
How to Find Your Septic Tank
Over time, all septic tanks become clogged with sediments and must be pumped out in order to continue functioning properly. Septic tank lids are frequently located at ground level. The majority of the time, they have been buried anywhere between four inches and four feet underground. In the event that you have recently purchased a property and are unsure as to where your septic tank is located, this article will give instructions on how to identify your septic tank. Noteworthy: While every property is unique, septic tanks are usually typically huge and difficult to build.
5 Ways to Find Your Septic Tank
1. Check with the municipal records. The most straightforward method of locating your septic tank is to review the building plans for your home that were approved by the local government. You should have received an application from the business that installed the septic tank, which should contain schematics and specifications that will help you to locate the precise location where the septic tank was installed. 2. Look for highs and lows in your data. The majority of septic tanks are constructed in such a way that they are barely noticeable.
- 3.
- Almost usually, your septic tank will be constructed near where the main sewage line exits your property.
- Septic tanks are typically positioned between ten and twenty-five feet away from a home’s foundation.
- When you do, that’s when your septic tank comes into play!
- Look for the Lid.
- You will most likely find two polyethylene or fiberglass covers positioned on opposing sides of the perimeter of your septic tank if it was built after 1975 and installed after 1975.
- Those areas should be excavated in order to disclose the lids.
- Get in touch with the pros.
- Lifting concrete lids will necessitate the use of specialized equipment.
- A fall into an unprotected septic tank has the potential to be lethal.
- Produce your own diagram of your yard, which you may file away with your other important house paperwork.
That’s all there is to it! If you’ve been wondering where your septic tank is, you now have five alternatives to choose from, which should make finding it easier than ever. To book a plumbing service in Bastrop County, please contact us now!
How to Locate Your Septic Tank Lid
Despite the fact that septic tanks are vast, they can be difficult to identify, especially if they have not been properly maintained over time. It is critical to be aware of the location of your septic tank lid and septic tank, whether or not you are aware of it. You must be aware of the location of your dishwasher, toilet, and sewage line in order to properly care for these appliances. Despite the fact that septic tanks are vast, they can be difficult to identify, especially if they have not been properly maintained over time.
Continue reading to find out how to locate your septic tank lid.
Why It’s Important to Know Where Your Septic Tank Lid Is
Locating the location of your septic tank is a good first step in diagnosing septic tank problems as soon as they occur. Consider the following scenario: If you notice water near your septic tank lid, you’ll know right away that there might be an issue with your system being overloaded with waste. Aside from that, understanding the location of your septic tank allows you to prevent parking cars directly on top of it, which might cause the tank to collapse. You may also lead service experts to the appropriate location for septic tank services, saving them both time and money in the process.
How to Locate Your Septic Tank Opening
Knowing why it is so critical to know where your septic tank lid is located, you may begin the process of locating the lid. During your search, keep an eye out for a circular top that’s around two feet broad and roughly two feet in diameter. Septic tank lids are often constructed of green or black plastic, although they can also be built of concrete. It is not always simple to locate the septic tank lid, however, because grass, mud, and other debris might obscure the opening.
How to Locate Your Septic Tank as a New Homeowner
During the process of purchasing your house, you should have been provided with a schematic of your property that showed the location of your septic tank. Your home inspection will most likely include this service. Check the diagram against your home to see where your septic tank is located. You may need to dig around the tank to determine whether the lid has been hidden. Consider placing a large item, such as a boulder, on top of the septic lid to serve as a reminder of its location.
Septic Tank Maintenance
It is important to keep your septic tank lid in good condition in order to avoid damage and to make it easier to access for future cleaning and maintenance. Consider trimming the grass surrounding your tank lid on a regular basis, eliminating all dirt and trash, and marking the area so that you can easily identify where the tank lid is.
Get in Touch With B D Today!
Are you dealing with any plumbing issues that necessitate the intervention of a professional? Are you dealing with a plumbing problem that simply must be put off any longer? Inform B D Plumbing of the situation. Plumbing services are provided across the greater Washington, D.C. metropolitan region, including Maryland and Northern Virginia, by B D Plumbing Inc. Get in contact with us by dialing (301) 595-1141 or by following us on social media, which includes Facebook, Twitter, LinkedIn, and Pinterest (to name a few platforms).
As a small, family-owned business, we realize how important your house is to you—and we strive to provide great service that reflects that importance! This item was posted on Friday, April 17th, 2020 at and is filed under Uncategorized. Commenting and pinging are temporarily closed for this post.
How to Locate a Septic Tank
A surprising number of homeowners have had to figure out how to find the location of a septic tank on their premises. If you’re purchasing a home with a septic system or discover that your property’s tank hasn’t been maintained in years, you’ll want to know where the tank is located because all septic tanks must be pumped at some point in time. In the course of a real estate transaction, the property owners or real estate agent may be aware of the location of the tank. Inquire about the “as-built,” which is a schematic of the septic system and the specifics of its installation.
Unfortunately, locating the septic tank may not be as simple as it appears.
Because septic system permits have only been needed in Oregon since 1972, you may have to depend on visual indicators to determine whether your system is working properly.
1.Follow the Outgoing Sewer Pipe
Look for the four-inch sewage pipe that runs through the structure and the location where it exits the building in the basement or crawl space. Locate the location outside the building where the pipe exits the building or the location of an access cover over the pipe. It is required that septic tanks be at least five feet away from the structure, although they are usually between 10 and 25 feet away. You may follow the pipe all the way to the tank using a metal probe. It is important to note that sewage lines may curve and run around the corner of a building rather than following a straight path to the holding tank.
2.Search for Septic Tank Risers and Lids
Depending on their age, septic tanks are either one- or two-compartment structures. Each compartment has a cover, with two additional lids for dual-compartment tanks that were added later. If the tank includes an access point known as a riser, the lid may be readily visible from outside. Look for round, plastic discs that are about a foot or two in diameter. Due to the fact that the lids might be flush with the ground or just a few inches above it, they can get overrun with grass and other plants over time.
Tanks without risers are likewise equipped with lids, however they are located underground.
3.Find the Drain Field First
In the absence of a riser and lid, search for indicators of a drain field, such as an area of grass that grows more quickly or more slowly than the rest of the yard, grass that is a different color from the rest of the yard, or areas where snow melts more quickly than in other parts of the yard. Spots of high or low ground in the yard might possibly indicate the presence of a subterranean tank or drain field. You will be able to discover the tank if you probe these regions.
Reasons to Hire a Contractor for Help
Attempting to locate a septic tank on your own can be risky, and in some cases, lethal, if the septic system is old and in danger of collapse. In the event that you fall into a cesspool, dry well, or septic tank, you will die.
Removing septic tank lids on your own might potentially put you at risk of contracting bacterial or virus diseases. If you detect any of the following issues, please contact a contractor to assist you in locating or inspecting your septic tank:
- Soil that is sinking around the tank or drain field. Drainage backup into the home’s sewer system, or toilet backup
- A foul odor in the area where you assume the tank and drain field are located
- When there is no rain, pooling water, muddy soil, or spongy grass might occur. Septic tank covers that are rusted, cracked, or have been replaced with improvised lids are prohibited.
Even though you may be ashamed about forgetting where your septic tank is, it is a very frequent problem among homeowners. A contractor may assist you in locating it, and he or she may do it as part of the pumping service. If you need assistance locating your tank or if you have any other questions, please contact us at 503-630-7802. We are available to assist you!
How to find your Septic Tank Cover in 3 Steps
Home-Diy When dealing with something as enormous as a septic tank, it should be simple to keep track of things, but in reality, the reverse is frequently true. If your bird has been resting in your yard for several years without being disturbed, the dirt above it has settled and the ground cover successfully camouflages it, making identifying one a bit of detective work. When the length of the sources is equal to zero, this.parentNode.removeChild(sources); otherwise, this.onerror = null; this.src = fallback; )(, arguments.target.currentSrc.replace(), ‘, /public/images/logo-fallback.png’) ” loading=”lazy”> ” loading=”lazy”> It might be difficult to locate a septic tank, regardless of its size.
You should, however, be able to complete the task without exhausting yourself with a shovel if you follow the process of logical inference and use two useful instruments.
- Design a floor plan for your property
- Metal detector, shovel and a 6-foot piece of rebar are all necessary tools for this job.
Tip
It is common for septic tanks to have two lids, one for cleaning the tank and another for repairing and maintaining the pump. If you don’t find the one you’re looking for, use the metal detector to locate the other one you’re looking for. If you are unable to locate a site plan, locate the sewer clean out and excavate to determine which way the sewage flows. Starting in that direction, begin probing with the re-bar until you come upon the tank.
Warning
You should immediately cease pounding at the bar when you find resistance. If your tank is made of plastic, you run the risk of damaging it. A short distance away will reveal if you have merely discovered a rock or whether you have encountered anything more substantial.
- Consult a site plan for your property that indicates where the tank will be located before installing it. If you don’t have one on hand, you may check it up in the records of the county building department, where the contractor who installed it was obligated to submit a copy of the certificate. Take note of the relative orientations of the tank and your house, as well as the distance between the tank and the side of your house where the sewer leaves. The sewage clean-out on the side of your property should be located and measured in the direction that it is intended to flow into the tank. Start probing for the tank at that point by pushing a 6-foot piece of re-bar into the earth with a sledge hammer to determine its location. Immediately after hitting an impediment, stop hammering and start excavating a foot or two farther down the road. a) Continue doing this until you can drive the re-bar even farther into the tank, which indicates that you have reached the end of the tank. In this manner, locate and mark the ends of the tank on both sides. To locate the cover, run a metal detector over the area you marked out with a marker. It is often made of metal, or at the very least contains metal components. In addition, if the tank is equipped with an effluent pump, which is always positioned beneath the lid, the metal detector will detect this as well. Starting at the location where you receive a favourable reading, begin digging.
The Drip Cap
- When dealing with something as enormous as a septic tank, it should be simple to keep track of everything, yet the contrary is frequently true
- If your plant has been lying in your yard for several years without being disturbed, the dirt above it has settled and the ground cover successfully conceals it, making identifying it a detective’s task. In order to locate the cover, use a metal detector to search the area you laid out. It is often made of metal, or at the very least contains metal components.
How to Find a Septic Tank and Manhole Cover
People frequently contact me through e-mail to inquire where they can find the septic tank cover for a septic tank, the manhole, or how to locate a septic tank in its natural state. Which is invariably met with the response “I don’t know.” Our plumbing how to will demonstrate that septic tanks and covers are never found in the same location, making it difficult for even the most experienced homeowners to make their way to the septic tank lid.
Check your building plans they often show you how to locate a septic tank.
It might be difficult to locate an aseptic tank, distribution box, or septic covers. The first thing you should do is double-check your original construction blueprints. Because these construction plans will frequently show you the exact placement of the septic tank or manhole covers for septic tanks, it is important that you keep them on hand. If you do not have your building plans, check with your local office of zoning to see if they already have a copy of your plan. Even if the septic system is still relatively new, there is a strong possibility they will, although many states do not save any of the earlier documentation.
It’s also possible to locate whichseptic tank service installed the system, and that company should be able to tell you exactly where the septic tank and/or septic tank lid are located.
How to find out where a sewer main exits the house.
If none of these options work, you will need to locate the point at which your sewage main exits your home. Whether you have a basement or crawl space, you should examine inside to see if there is a 4 inch black pipe coming out of the foundation and where it goes. It is necessary to locate the lowest drain in your home if you do not have a basement or crawl space, or if your sewage main is located beneath your home’s foundation, in order to complete this task. This is normally where a floor drain is located, and it is also most likely where the sewage line will exit your house.
Use a tile probe to find the pipes leading to the septic tank.
Having located your sewage main and having a general notion of where the sewer pipe exits the home, you will need to step outside and probe the ground directly next to your foundation with a tile probe or a 12-inch or 14-inch stainless steel rod until you locate the sewer pipe. However, if you push too hard, you may wind up poking a hole in the drainpipe, which is particularly dangerous if the drainpipe is an older type of cast iron pipe. Once you’ve located the main line, you’ll want to go on to the next step: locating the septic tank.
The majority of septic tank systems are located between ten and twenty feet away from your property.
Septic tanks and septic tank lids are two types of septic tanks.
The manhole cover for the septic tank may be found here.
How to locate a distribution box.
At the very least, it should be a little easier to locate the distribution box. It is normally around ten to twenty feet away from the septic tank, and you can sometimes tell it is there just by looking at the way your grass grows in the spring and summer. A common occurrence is that the grass will be greener above the drain lines, and you will be able to observe a pattern on the lawn where the lines meet together, which indicates the location of your distribution box. Other than that, you’ll have to place the distribution box in the same manner as you did with the septic tank.
Some of the things you can find while locating your septic tank are:
- Soils with a lot of clay. Clay soils can be difficult to penetrate, and once a probe is inserted, it can be very difficult to extract it
- Rocky soils can also be difficult to penetrate. You believe you’ve found the tank, so you begin excavating, only to discover a rock. And this is something that may happen over and over. Deep-level systems. Tracking and digging in a hole that is more than 2 or 3 feet deep may be a genuine pleasure. Pipes that appear to twist and twirl before disappearing into nothingness are common in older systems.
It is recommended that specialists like Septic Tank Service do this type of work (some pumpers merely pump tanks; they do not find the tank). Often, simply by glancing at your house, a professional plumbing expert will be able to figure out exactly where everything is.
In addition, if they are unable to locate it immediately, they still have all of the necessary equipment and plumbing tools to locate the septic tank’s lid much more quickly than you can.
External References
- Using the Internet, you may learn how to locate your septic tank (inspectapedia.com), how to locate your septic tank (septicdesign.com), and more.
Finding your septic tank lid
Locating your septic tank is important. lidniftyadmin2021-08-24T19:28:53+00:00
FIND YOUR SEPTIC TANK LID
Make an appointment for a free on-site quote now!
Do you know where your lid is?
It is a good idea to be familiar with the position of your septic system, particularly the location of the septic tank lid. If you have a septic emergency, this is very crucial to remember. If you want to be proactive, it would be wise to create a map and a detailed description of the location of your septic system. If you do not already have this information, you can acquire it from the Central District Health for Ada, Boise, Elmore, or Valley County, or the Southwest District Health for Adams, Canyon, Gem, Owyhee, Payette, or Washington County, depending on where you live.
- We can build a bespoke “Riser” that rests flush with the ground to make it simpler to get to a septic tank lid in the winter or to access buried tank lids.
- Polyethylene, polyvinyl chloride, and concrete are the most often used materials for these structures.
- The use of concrete-based ribs is also associated with greater leakage difficulties than other varieties.
- These risers are more resistant to corrosion caused by chemicals and dirt.
- PVC risers are one of the lightest materials available, making them extremely simple to install.
- A septic tank riser installed on your system will prevent you from ever having to dig up or look for your tank lid again, and it will make servicing your tank much easier.
We provide essential maintenance to all customers!
We feel it is critical to support organizations and businesses who are striving to make a good difference in our industry and community at large. We take great satisfaction in growing as a company by utilizing the greatest products, from reliable vendors, and ethical business procedures in order to provide superior service to our customers. It would not be feasible to deliver the Honest and Ethical Service that we do without the support of our industry partners and the client relationships that we have built across Southern Idaho since 1948.
Thank you for being a part of our expansion and putting your faith in ABC Septic to handle your pumping needs. a link to the page’s load
How to Locate Your Septic Tank
It may seem impossible to imagine that one of the largest and most visible elements of your whole plumbing system is also one of the most difficult to locate, but when your property is served by a septic system, this is perfectly true. A strong explanation for this is because septic tanks are huge, unattractive, stink horrible and give off an unwarranted impression of dirt. Not only does burying them underground assist to prevent them from harm, but it also provides you with additional useable space on your property and conceals what would otherwise be a blight on your landscape.
This site is dedicated to assisting you in locating your septic system without the need for any time-consuming digging.
How To Find A Septic Tank: Step By Step
It is critical to maintain the health of your septic tank since it is responsible for securely storing and handling the wastewater that drains from your house. It is necessary to pump your septic tank once every 1-3 years, depending on the number of people living in your household and the size of your tank, in order to avoid septic tank repairs or early failure, which means you must be familiar with the location of your tank. It’s not often simple to identify your septic tank, and many plumbers charge extra for this service, which is especially true if your tank’s lid is buried beneath.
1. Gather Some Helpful Tools
Septic tank location may be made much easier with the use of several simple instruments and techniques. To locate your septic tank, you only need to know the following information: A soil probe is one of the most useful instruments for locating a septic tank. It is a tiny piece of metal that is used to puncture through the earth and detect anything that could be buried underneath. Start at the point where your sewage line exits your home and work your way straight out, inserting your soil probe every two feet along the way.
Using this method, you may also locate the cover for your septic tank.
While we highly advise keeping your cover clean and exposed in the event that you require emergency septic service, we recognize that this is not always the case.
2. Use a Septic Tank Map
If you are a new homeowner who is trying to figure out where your septic tank is, a septic tank map should be included in your inspection documentation.
You can use this information to assist you in pinpointing the exact position of your storage tank. If you don’t have access to this map, there are a few of additional strategies you might employ.
3. Start Ruling Areas Out
The location of a septic tank cannot be constructed in specific areas due to the risk of causing major damage to your property or tank, as specified by local rules. Your septic tank will not be affected by the following:
- Immediately adjacent to your well
- Beneath your home
- Directly against your home
- For example, underneath your driveway
- Under trees
- And other locations. Structures like a patio or deck are good examples of this.
4. Inspect Your Property
If you take a hard look around your land, there’s a high possibility you’ll be able to locate your septic tank without having to do any probing whatsoever. In many circumstances, a septic tank may be identified by a slight dip or slope on your land that cannot be explained by any other means. Due to the fact that the hole that your contractors excavated for your septic tank may not have been exactly the proper size, they proceeded to install the tank anyhow. This is a rather regular occurrence.
When there is a minor divot or depression, it indicates that the hole was too large and that your contractors simply did not fill the depression to level the hole.
The likelihood of your septic tank being discovered in a few specific locations is quite high.
- Your water well, if you have one (for a variety of reasons that are rather clear)
- Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built and no one performed a proper inspection before it was built)
- Any paved surfaces (it won’t be under a driveway, sidewalk, or patio unless they were added after the home was built and no one conducted a proper inspection before it was built)
- Any paved surfaces (it won’t be under a patio, sidewalk, or driveway unless they were added after the home was built If there is any particular landscaping
5. Inspect Your Yard
A comprehensive investigation of your yard may be necessary to discover your septic tank considerably more quickly in some cases. The following are important items to check for in your yard:
- If your septic tank is overfilled, sewage can leak out into the ground and function as fertilizer for your lawn, resulting in lush green grass. A area of grass that is very lush and green is a good sign that your septic tank is just beneath it
- Puddles that don’t make sense: If your septic tank is seriously overfilled, it is possible that water will pool on your grass. Another telltale indicator that your septic tank is below ground level is an unexplainable pool of water. Ground that is uneven: When installing septic tanks, it is possible that the contractors will mistakenly create high or low patches on your grass. If you come across any uneven terrain, it’s possible that your septic tank is right there.
The metal soil probe can let you find out for certain whether or not your septic tank is located in a certain area of your yard or not. As soon as your metal soil probe makes contact with the tank, you may use your shovel to dig out the grass surrounding it and discover the septic tank lid.
6. Follow Your Sewer Main/Sewer Pipes
Using your metal soil probe, you can determine whether or not your septic tank is located in a certain area of your yard. As soon as your metal soil probe makes contact with the tank, you may use your shovel to dig up the grass surrounding it and discover the septic tank cover.
7. Check Your Property Records
Lastly, if all else fails, a search of your property’s public records will almost certainly reveal the location of the tank you’re looking for. Your builders most likely secured a permit for your property because septic systems are required to be installed by law in every state. In order to do so, they had to develop a thorough plan that depicted your property as well as the exact location where they intended to construct the tank. This is done to ensure that the local health department is aware of the tank and is prepared to deal with any issues that may arise as a result of its presence.
If you look hard enough, you may be able to locate the original building records for your home without ever having to get in your car or visit your local records center. Some localities make these records public on the internet, whereas others do not.
What to Do Once You Find Your Septic Tank
Upon discovering the position of your septic tank, you should mark its location on a map of your property. Use something to indicate the location of your lid, such as an attractive garden item that can’t be changed, to help you locate it. A birdbath, a rock, or a potted plant are just a few of the possibilities. You are now ready to arrange your septic tank inspection and pumping service. Contact us now! If you have any more concerns regarding how to locate your septic tank, or if you want septic tank servicing, please contact The Plumbing Experts at (864) 210-3127 right now!
How to Find Your Septic Tank
Many folks have contacted me through e-mail (typically from across the nation) to inquire about the location of their septic tank. “I have no idea,” I generally say as a helpful response to the question. I really want to add something like, “It’s just off your driveway, near that bushy thing,” or anything along those lines. But, truly, even for the most experienced searchers, septic tanks are difficult to come by. The following are some strategies you might employ to assist you in locating your tank.
- Precaution should be exercised before you get started.
- So, proceed with caution!
- Please let me know if you have any queries or need assistance.
- Get to know the beast!
- tanks are normally buried 4 inches to 4 feet below the surface of the ground.
- You might be astonished to hear that someone knows exactly where it is hidden in plain sight.
- It is against the law to dig or probe in your own yard without first locating and marking the underground services.
You will receive the following tools to aid you in your search: Measurement tape, tile probe, and a shovel (if you are ambitious) The following tools are required: a metal detector (borrow or rent one since septic tanks often include iron steel rebar in the lids), and a hoagie sandwich (because locating sewage tanks makes you hungry.trust me on this).
- Examine the basement wall to see where all of the pipes join together and exit through the basement ceiling.
- If you don’t have a basement, walk outdoors and check for the roof vents on your house.
- Ordinarily, the sewage line that leads to the septic tank will exit the home right below this ventilation opening.
- On sometimes, the ancient proverb “The grass is always greener on the other side of the septic tank” is true.
Your tank may be located by probing or digging for it, and with luck, you will locate it. Keep in mind that not everything that seems to be a septic tank actually is! It’s possible that you came upon one of the following instead:
- Rubble buried in the ground (not to be confused with Barney Ruble)
- SepticDrywell
- An old foundation
- In case you happen to live in a cemetery (which is spooky), you may use a grave vault to keep your belongings safe.
After a few hours of hopelessly digging about in your yard, it will be time to eat your hoagie and take a little sleep. Following that, it will be necessary to rent or borrow a metal detector. In the event that your next-door neighbor loves Star Wars action figures or has more than three unidentified antennae on his roof, there is a significant probability that you can borrow his metal detector. If you’re lucky, the metal detector will really assist you in finding your septic tank, rather than simply a bunch of old buried automobile parts.
- According to local legend, a pumper known as “Zarzar The Incredible” can locate sewage tanks using a metal measuring tape spanning 30 feet in length.
- Continue to press your commode (“commode” sounds sophisticated) tape deeper and farther down the pipes until he “feels” the bottom of the tank with his tape.
- I recently acquired locate equipment that can be used to locate septic tanks, and I’m excited about it.
- For further information, please contact me at 574-533-1470.
- After that, you may have a movie of the inside of your sewer pipes created!
- Related: Visit our Septic System Maintenance page for more information.
- Services provided by Meade Septic Design Inc.
- Both Clients and Projects are included.
- Send me an email!
How to find your Septic Tank at Home
When was the last time you paused to think about what happens to the things you flush down the toilet? It’s a little disgusting to think about, isn’t it? It’s possible that you’re conjuring up images of cobwebby crawlspaces with a swarm of creepy-crawly unmentionable creatures sliding, slithering, creeping, or crawling over crusty, rusted, ooey-gooey piping that’s oozing slimy goo from every joint. If this sounds like something you’re picturing then you’re not too far off the mark. I sincerely hope you are.
- That’s why I’d want to assist you in learning how to locate your septic tank.
- Simply dial 911 and ask for assistance in a calm manner.
- Most hide-and-seek games are won by septic tanks, which are well-known for their amazing ability to outperform the typical human rival.
- The good news is that.
- Contrary to common misconception, septic tanks are not often found in attics, basements, or any of the numerous closets that may exist in a house or apartment.
- Relax in your favorite place for a few minutes with your favorite beverage in hand.
- Yes, you read that correctly: your yard.
Alternatively, you can sink.
Or whatever it is that’s causing the terror to rise in your chest to rise in your chest.
Septic tanks are normally installed in one of your backyards or on your property.
How are you doing?
If your septic tank is in close proximity to your well, this should be avoided.
Septic tanks are often located on the other side of a house from where your home is located.
Tanks are often placed with their tops buried beneath the surface of the ground, usually at least 12 inches below the level of the ground’s surface.
A plastic access tube or a concrete riser structure that runs from the top of the tank to the ground level will often be included to give access for a Septic Pumping firm to empty the tank. Shankster Brothers (also known as Shanksters)
Many septic tank installers will attempt to blend these access risers into the surrounding landscaping so they don’t create an ugly eyesore.
So the next step is to mentally go about your yard, looking for any circular, plastic lids that could be lying around. These can range in size from 10 inches to 24 inches in diameter and can be either black or green. Second, if the answer is no, consider any round, square, or rectangular concrete lids that may be present in your yard or landscaping as a possible source of contamination. Often, they will be practically flat with the surface of the ground, allowing a lawnmower or rake to pass directly over the top of them without causing damage.
- Typically, the septic tank access will be no more than 10 feet away from your home, but in the event of an older home or a subsequent addition to the property, they may be closer than that.
- Hopefully, you have a basement to store your belongings.
- If your home does not have a basement or crawlspace, we will rely on other indications to locate your home.
- All of these pipes should converge into a single bigger pipe (usually 4 inches in diameter) that exits the house via one of the home’s walls.
- Now it’s time to go outdoors.
Check the area where the pipe comes out of the house. There may be a PVC pipe extending to the surface, with a threaded cleanout cap on it. If you find this, you’re well on the way to victory.
Take a check at the roof if your property is constructed on a slab with no basement or crawlspace beneath it. Check the roof for a vent pipe that is coming out of it. An internal vent that travels straight up, through the roof, and out the top of your home is common. If you can identify that vent, it might be possible to figure out where the pipe is departing the house. Continue walking outside from the house for a few steps, keeping an eye out for that round, square, or rectangular cover. If you can’t discover it, check for a little sunken place in the yard that could be hiding anything.
If you notice one of those, you might want to look underneath it to see if there is an entry point hidden there.
It’s possible that here is where your tank is lurking. If none of these suggestions have resulted in victory, and you begin to observe your neighbors peering through their blinds with those anxious glances that neighbors are so prone to giving.give us a call!
We have foundseptic tanksin many strange and unpredictable places. Here’s hoping you win the game on how to find your septic tank. Here tanky, tanky, tanky! If you need to schedule aseptic tank cleaning, pumping, or inspection, don’t hesitate to call Shankster Bros at(260)-982-7111. any time.
Disclosure: This post contains affiliate links, which means that if you purchase a product after clicking on one of our links, we may receive a commission or free product from the firms featured in this post. Amazon is a good illustration of this. Because the septic tank is so enormous, you would think it will be simple to locate a septic tank lid. However, keep in mind that the lid is buried deep beneath and is not usually visible from above the surface of the earth. The good news is that there are several simple methods for finding the septic tank lid when you need it.
So, what is the best way to locate a septic tank lid?
In order to locate the lid, a metal probe is utilized to identify the edges and label the perimeters of the container.
Continue reading to learn about other methods of locating a septic tank lid, how a metal detector may be used to assist in the search, and whether it is possible to locate the lid on your own.
CALL 855.925.0760 FOR SEPTIC SERVICES
Every homeowner is responsible for knowing where their septic tank is placed. If you know where your septic tank is located, it will be much easier to detect the many issues that may be affecting it. In the case of flooding directly at the septic tank lid, you will know that there is an issue with overloading. Furthermore, once you know the position, you may make certain that no cars are parked on top of it. It is possible that the lid will collapse if cars are parked or move over it. The entire septic system will come crashing down.
As a result, it assists in saving both money and time.
CALL 855.925.0760 FOR SEPTIC SERVICES
If you are not the original owner of your property, it is possible that you will not be aware of the exact position of the septic tank. Here are a few pointers to keep in mind when looking for septic tank covers.
- Follow the Sewage Pipes — It is important to remember that the drainfield and septic tank are often constructed in a line with the sewer lines. The sewer line runs from the house to the backyard. The 4-inch sewer pipe will be found in the basement, since it is the conduit that connects the house to the sewer system.
Simply follow this pipe all the way across your property. Continue probing the ground every 2 feet for the rest of the day. Tanks are typically placed at least 5 feet away from the home. These are typically between 10 and 25 feet distant from the subject.
- Investigate the County Construction Permit Records –Counties often maintain account of their building permits, which may include the installation of a septic system. This is offered with a graphic as well as the necessary measurements. It aids in the identification of the septic tank on the site
In addition, a schematic of the septic system will be included in the house inspection documentation. Check for information such as the distance between the tank and the side of your house or the sewer outflow, among other things. Keep in mind, however, that historical landmarks are always changing.
- Dig the Lids — Depending on the septic tank configuration, there may be two or three lids on the septic tank. Most septic systems are rectangular in design, measuring 5 feet by 8 feet in size. The components are typically buried between 4 inches and 4 feet below the surface of the earth. Finding the lid by probing with a metal object is beneficial. In addition, you can excavate with a shovel, which should disclose the lid of the container.
CALL 855.925.0760 FOR SEPTIC SERVICES
Any ancient property might be difficult to navigate while trying to locate the position of the septic tank’s lid. In order to accomplish this, you will require probes or metal detectors. When it comes to locating septic system components such as the lid, these are fantastic tools. In order to locate a septic tank lid on an ancient property, you will want expert assistance.
However, due to the fact that older homes include several levels of pipes and cables, caution should be exercised. These can be deceptive, and they can lead to problems in reading comprehension. Learn more about how a septic system works by reading this article.
Where are Most of The Septic Tanks Located?
For anyone seeking for septic tank lids, it is necessary to be familiar with the basic location of these tanks. This type of structure is often built between ten and twenty feet away from your home. If you are unable to locate the septic tank or if it has been buried, you can look in the crawl space or the basement. You will come across the sewer lines that are exiting the property at this location. In most cases, the septic tank will be located outside, close to where the sewer pipe terminates.
CALL 855.925.0760 FOR SEPTIC SERVICES
It is your obligation to ensure that the septic tank is in good working order after it has been identified. There are no damages to the and it is simple to get to when professionals return to their homes. In order to guarantee that the septic tank lid is properly maintained, you may do the following:
- You should make a habit of periodically clipping the grass that likes to grow around the lid. You may clean away any debris or grime that has accumulated on the lid. Anything that extends over the lid is not permitted – even flower pots are not suggested. A car should not be parked on anything erected above the system
- You should also make certain that no weight is placed on it. Place a garden décor object, such as a beautiful rock or a flag, just above or alongside the lid to serve as a marker for where the lid is
By marking the position of the septic tank, you will not have to spend additional time looking for it the next time you need to.
CALL 855.925.0760 FOR SEPTIC SERVICES
If the septic tank was erected prior to 1975, it will have a single lid to protect it. This is a 24 inch lid that sits perfectly in the middle of the rectangular shape. A two-compartment tank, or one that was added after 1975, will have two covers, one on each compartment. These are often built towards the end of a rectangle’s length and width. The process of opening and closing a septic tank lid can be difficult, especially if you do not have the proper tools. You’ll need a pry bar to get it out of the way.
The prybar has been placed in the proper position.
With the help of this tool, you may effortlessly remove the lid from its hole.
You may place this cover on top of the surface.
There are two baffles in the tank: an inlet baffle and an exit baffle, if there are two baffles in the tank.
As a result, the tank settles and distinct strata begin to form.
You should make sure that the location of the lid is clearly marked so that no one drives over it, even by accident.
The lid should not be searched for if there is an emergency and specialists are called to your home.
