How To Find Septic Tank Drain Lines? (Perfect answer)

Scan the area for markers: The location of your septic tank should be marked by a cement marker the size of a manhole cover. Look for it 10 to 20 feet away from your home. Once you locate the tank, follow the downward-most path and check for an empty downward-sloping field. You may have just found your drain field.Scan the area for markers: The location of your septic tank should be marked by a cement marker the size of a manhole cover. Look for it 10 to 20 feet away from your home. Once you locate the tank, follow the downward-most path and check for an empty downward-sloping field. You may have just found your drain fielddrain fieldThe drain field typically consists of an arrangement of trenches containing perforated pipes and porous material (often gravel) covered by a layer of soil to prevent animals (and surface runoff) from reaching the wastewater distributed within those trenches.https://en.wikipedia.org › wiki › Septic_drain_field

Septic drain field – Wikipedia

.

How do you clean out a septic tank?

• It is safe for septic systems and is one of the best cleaners to use for those who are concerned about septic tank care. Just sprinkle baking soda onto counter tops, in sinks, onto the toilet bowl or anywhere else that needs cleaning. Scrub with a sponge or brush and wipe or rinse away with water.

Are septic tank locations public record?

Contact your local health department for public records. These permits should come with a diagram of the location where the septic system is buried. Depending on the age of your septic system, you may be able to find information regarding the location of your septic system by making a public records request.

How do I know if my septic tank has a drainage field?

Some of the signs that your property has a septic tank are:

1. The tank needing to be emptied each year.
2. 2, 3 or 4 manholes in close proximity to each other above ground.
3. Possible vent pipes above ground – these take unpleasant smells and gasses from the tank and distribute them into the air.

How far down is a leach field?

A typical drainfield trench is 18 to 30 inches in depth, with a maximum soil cover over the disposal field of 36 inches.

What do lateral lines look like?

Lateral lines are usually visible as faint lines of pores running lengthwise down each side, from the vicinity of the gill covers to the base of the tail. Most amphibian larvae and some fully aquatic adult amphibians possess mechanosensitive systems comparable to the lateral line.

How do I find out if my septic tank is registered?

Check if your septic tank is already registered You can check if your tank has already been registered by contacting your environmental regulator. If you are unsure then it is best to check and avoid making an unnecessary payment. The NIEA and SEPA have records of all registered septic tanks.

How do you find a metal detector with a septic tank?

6 Steps to Locate a Septic Tank

1. Find Your Main Sewer Drain Line. Sewage from your toilets, sinks, and showers collects into a main drain line.
2. Check Permits and Public Records.
3. Determine Septic Tank Material.
4. Time to Dig.
5. Mark the Location for Future Maintenance.

How do I know if my drain field is working properly?

Greener and taller grass around the drainfield If you notice taller, greener grass where your leach field is located, it’s an indicator that your leach field is not functioning properly. If wastewater can no longer infiltrate the soil, pressure can cause it to rise to the surface.

Do septic tanks drain into the ground?

Soil-based systems discharge the liquid (known as effluent) from the septic tank into a series of perforated pipes buried in a leach field, chambers, or other special units designed to slowly release the effluent into the soil.

How far should drain field be from septic tank?

Common guidelines require at least 50′ clearance distance between a well and a septic system tank or 150′ between a well and a septic drainfield or leaching bed but you will see that different authorities may recommend different distances. Local soil and rock conditions can make these “rules of thumb” unreliable.

Can you have a septic tank without a leach field?

The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.

Can you add dirt on top of leach field?

Never add additional soil over the drain field unless it is a minimal amount used to restore an area that may have been eroded or pulled up by removing another plant. Try not to be overly zealous when tilling the soil for planting. Remember that the drain lines may be as close as 6 inches from the soil surface.

How to Locate Your Drain Field

Homeownership entails a large number of duties. Making repairs to the house, keeping the lawns, caring for the landscaping, paying all kind of bills and taxes, and a slew of other responsibilities are required. But it’s all worth it when you finally get to purchase your own house. Consider the following scenario: you have acquired a home in Modesto, CA that has a septic tank installation. Regardless of whether you are familiar with septic systems or not, you must be aware of the location of the tank and drain field.

In light of this, we would like to provide you with some expert guidance to assist you in locating your drain field.

A few sewage system pipe routes are easy to identify in the yard, while others are more difficult to locate.

• First, take a look around your yard. It’s typical for you to not notice any indicators of your drain field’s presence at first sight. For starters, go around your yard, checking for lines of green grass, dead grass, and sunk-in regions (front, rear, and sides). If you see any of them, go ahead and investigate since these are indications of a drain field installation. Examine the surrounding region for markers: Ideally, a cement marker the size of a manhole cover should be used to indicate the position of your septic tank. Try to find it between 10 and 20 feet away from your house. As soon as you’ve located the tank, head down the steepest slope and look for an empty downward-sloping field to hide in. It’s possible that you’ve just discovered your drain field. Check your yard for gravel by doing the following: Another option is to probe your yard and feel for gravel, because drain field lines are covered in gravel as a manner of guiding wastewater through the treatment process and are therefore difficult to detect. If you come across gravel, you may have discovered your property’s drain field. Please be aware that probing may be difficult in regions where the soil is hard or rocky
• Thus, caution is advised. Examine the county’s records: A copy of your property’s septic records may be on file with your county’s permits department or with the business that built the septic system in its first place. Read the notes left by past owners: Another option is to inquire with the former owners about the location of the drain field. Even if this isn’t possible, look in the garage, cupboards, and bathroom areas for notes or instruction manuals that may have been left for you by the previous residents. When people are preparing to move, they may gather all of the owners’ manuals or write out their own notes on how to use and maintain specific appliances or systems in the house, as well as important information about the products (age, maintenance records, and so on). There’s also a chance that they’ve sketched out the location of the drain field. Request information from neighbors:You should make yourself known to your immediate neighbors as soon as possible after moving into your new house. This is an excellent moment to inquire as to whether or not they are aware of the location of your drain field.

Alvarado Pumping Septic Service is the company to call in Modesto, California, for the best septic maintenance, drain field services, and septic tank installation you can find. Our septic system professionals are here to assist you at any time with your house or business’ septic system!

How to Find My Septic Tank Lines

Alvarado Pumping Septic Service is the company to call in Modesto, California, for the best septic maintenance, drain field services, and septic tank installation you can get. No matter when you need assistance with your septic system, our professionals are here to help!

In This Article

• Septic System Fundamentals
• Identifying and Locating a Septic Tank on Your Property
• Conducting Regular Inspections
• Checking for Clean-Outs
• Identifying Natural Indicators
• Viewing System Diagrams
• Seek Professional Assistance
• Check the distribution box
• Understand the size and scope of the project.

Are you curious about the location of your septic lines? It is critical to know where the septic tank is located on a property in order to properly manage and preserve the system. For example, you don’t want to pave over the ground or grow trees too close together in a forest. It is possible to obtain a copy of the septic tank diagram of the drain field, which will give you a fair sense of where the pipes will go. If this is not the case, you may need to attempt some other methods of locating septic drain lines.

The solids and liquids are separated within the tank by a baffle or wall that is built inside the tank.

When pipes get clogged or when drain fields become too saturated with fluids, problems arise.

Locating a Septic Tank on Your Property

Begin your search for the septic tank lines at the residence first. Drain lines from the home’s plumbing should be traced to the septic tank, which is typically located 10 to 20 feet from the home’s exterior. The drain line connects the tank’s end, which is located opposite the house, to the leach field. Check the natural slope of the ground to see whether the leach field may be found there. It is never a good idea to look for drain lines using heavy gear, wrecking bars, or jackhammers. Before excavating, contact your local electric utility provider or gas company to determine the location of underground gas or utility lines.

A septic tank probe can also assist you in locating the tank’s position. Plunge the long, thin metal probe into the earth until you can feel it strike the tank and feel the tank’s edges. This might assist you in locating the pipes that lead away from the tank.

Perform Regular Inspection

According to industry experts, you should examine your septic tanks and, if required, pump them out once every three years. If you are experiencing gurgling sounds in your house or water backing up after your system has been repaired, a saturated drain field might be the source of the problem. Drain fields that have been clogged or damaged are unable to be rectified. In order for the septic system to function properly again, you’ll need to have a new drain field installed. Find capped clean-outs that are a few inches vertically above the ground in the leach field itself, or check behind a wall or in a closet in the basement for capped clean-outs.

1. You can visually trace the orientation of the pipe from the clean-out if there is no other information available.
2. Credit: Kyryl Gorlov/iStock/Getty Images for the image.
3. When you are looking for the lines, look for grass or vegetation that greens in stripes when the grass surrounding it browns.
4. Putting hot water into your system might cause snow or ice to melt above the drain pipes if the system is not properly insulated.
5. If you have a deep system, as is the case for homes with basements, you will most likely not be able to observe natural signs since the drain field is too deep to be seen from above.
6. Unless the system was built without a permit, the blueprints or designs for septic system installations are kept on file with the local health authority until the system is operational.
7. If your search does not provide any relevant results, you can request a record search based on your street address or the tax account number associated with the property.
8. If the agency has a copy of the record, they will mail it to you.
9. If you don’t have a drawing of the septic system, you need enlist the assistance of a disposal system contractor or a certified liquid waste transporter to find it.

Another option is to purchase a flushable transmitter from a plumbing or rental business, or you may contract with a tank cleaning firm. The signal from the transmitter is picked up by a hand-held receiver after it has been flushed down the toilet.

Check the Distribution Box

There are certain septic tanks that feature an extra distribution box that is located a few feet from the tank on the tank’s downstream side. Water is channeled into the trenches by ports and pipes in the box. It is recommended that, if your system includes a distribution box, the box’s top be designed to expose the orientation of the ports that connect to the drain field lines. It is feasible to locate the box with a probe, but extreme caution should be exercised. Avoid applying excessive force to the probe, since this may result in damage to the box.

In most cases, individual drain lines run perpendicular to the intake line, but they may also branch into an H-pattern or other patterns that are appropriate for the terrain.

Find the location of your septic drain lines so that you can safeguard the area in and around them with a little detective work.

How to locate your septic tank and your drainfield

Septic systems on-site are used for accepting and treating wastewater in homes that are not linked to the municipal wastewater management system. A septic system is comprised of three components: a septic tank, a drain field, and piping. As a homeowner, it is your responsibility to properly operate and maintain your septic system in order to avoid system failure. For example, depending on the legislation in your area, you may be compelled to pump it on a regular basis. It is impossible to perform maintenance operations, however, if you do not know where the tank is located.

Steps to follow to locate your septic tank and drain field

The contractor that designed and constructed the septic tank on your property should have submitted an as-built diagram with the local health authority before starting work on the project. In the event that you have the contractor’s contact information, you can ask them for a schematic, which you can then use to pinpoint the location of your septic tank. If you do not have a copy of the schematic, you can request one from the local authorities. Depending on whether the installed system included electrical components, the schematic may be available at the regional building department offices.

• If you are unable to locate the tank using this diagram, you will need to do more research on the land in order to determine its position.
• This pipe is commonly found in the basement of a home, and it is a 4″ black pipe with a cleanout at the bottom.
• Simply look for possible access coverings or a structure that might be concealing it.
• These pumps are used to remove waste from the building.

Having discovered it, flush a toilet and listen to the pump to determine where the sewage is being discharged. It is supposed to be connected to the sewage output pipe. You should now be able to see the general orientation of the septic tank and drain field from this point.

As soon as you’ve discovered the sewer outlet in your basement, you may use it to figure out where the sewer line departs your home through an outside wall. The septic tank will be located a few meters away from the home, and the outflow pipe may be at an angle of 30 or 45 degrees from the house. As a result, it is probable that the tank will be positioned around the corner from the building. Work your way around the home in a circle, starting at an electrical outlet and continuing until you find the septic tank.

Tips for locating your septic tank

Septic tank lids should be visible from the outside. An underground riser may have been added, which will make it simple to find your septic tank in some instances. However, it is conceivable that the septic tank cover is buried underground, which is especially true for older homes. Following are some pointers to assist you in locating the septic tank in this and other similar situations.

• It may be possible to discover the septic tank lid underneath using a metal detector if it is buried. Prevent wearing footwear that contains steel or any other metal in order to avoid interfering with the readings of the detector
• Instead, you can use a flushable transmitter that is flushed down the toilet and then tracked with a receiver. When it comes to septic tanks, the strongest signal will be seen close to the intake region of the tank.

Depending on whether the septic tank is above or below ground, you may have to dig to get to it. Construction materials for septic tanks include concrete, fiberglass, or plastic, and their shapes can range from oblong to cylindrical to rectangular. The majority of modern septic tanks will have their lids positioned in the center of the tank, and the lid should be within three feet of the ground surface in most cases. However, depending on a variety of conditions, such as farming and other human activities on the property, it is conceivable that it will be significantly deeper.

Additionally, you may use a small steel rod to probe the earth in order to pinpoint exactly where the tank is located as you continue digging.

Inspecting the tank

It is critical to thoroughly inspect and evaluate your septic tank and its contents when it has been identified. First and foremost, you may unscrew the lid to inspect the scum and sludge layer beneath it. In addition, the use of tracer dye tablets allows you to check the septic tank without having to dig it up. If you use tracer dye pills, all you have to do is flush them down the toilet and wait for a maximum of two days. Because of the way the tablets dissolve in water, if there is a problem with the septic system, you will see that the leach field has a glowing green hue surrounding it.

It is possible that someone will fall into the tank, causing significant damage or possibly death.

Conclusion

You can identify your septic tank without assistance from a professional, but it is a good idea to have someone who is properly educated in septic tank maintenance examine and maintain your septic tank on your behalf. The effluent filter in your tank should be washed into the open septic tank rather than on the ground in your yard if your tank has one. It may also be a good idea to make a note of the position of the septic tank when it has been discovered. This will be beneficial to anyone else who may require access to the septic tank in the future.

Septic tanks release combustible and hazardous gases, and as a result, they must be located in an open area.

How to Locate Your Septic Tank Field Lines

Your septic tank field lines are undoubtedly present, but where exactly can you find them? They are less difficult to get by than you may assume. In this post, we’ll go through what to look for in order to figure out where to seek for them. After reading this, the vast majority of people should be able to locate their system without the aid of a specialist.

Why Does it Matter?

Getting into problems with the law is easy if you’re conducting household chores and accidently damage your field lines. It is worthwhile to find your field lines if you want to save money and time in the long run. The following types of work can harm your lines: any form of paving, driving and parking heavy equipment, planting shrubs or trees, and landscaping are just a few examples. Even the smallest omission can result in financial losses of hundreds or thousands of dollars.

Who Should Look for the Lines?

Locating the field lines for your septic tank is a very simple procedure. There is no unique training or skill set necessary for this position. In other circumstances, it may be impossible to locate the lines on your own, and you may need to seek expert assistance. In the majority of circumstances, anybody may search for the lines. You, too, can succeed with a little assistance from this essay. More information may be found at:

• How to Select and Use the Most Effective Septic Tank Treatment (Top 3 Reviews)
• 5 Different Types of Residential Septic Systems (and the Advantages and Disadvantages of Each) Home Remedies for a Clogged Septic Tank (Also Including Maintenance Suggestions)

How to Locate Your Septic Tank Field Lines

Here is a list of strategies and procedures you may use to locate the lines that drain into your septic tank’s drain field.

Find the Drawings

Reaching out to your local health agency is the most reliable means of locating your septic tankfield lines. It is their policy to keep a dossier on every septic system that has been installed with a permit. Of course, if your system was not constructed with a permit, you will not be successful in this endeavor. It will be possible to see the layout, position, and every aspect of your drain field thanks to the drawings. Typically, they will mail you the drawings that you have requested. You can also get in touch with the contractor who did the septic system installation or the former owner of the house for further information.

The Grass is Much Greener…

It is expected that your drain field would absorb up nutrients and water from the surrounding soil. In other words, your drain field will be a lot greener and healthier piece of grass than the rest of the surrounding landscape. The type of cues you use to locate your drain field will be determined by your climate.

Cold Climates

If you live in a frigid region, wait until the morning when it is snowing or ice. It’s possible that your drain field will be the first to melt.

Warmer Climates

Because of the warmer environment, it is easy to locate the drain field. For a few days, refrain from watering your yard. With the exception of your drain field, you’ll observe that the majority of the grass begins to wither.

Check for Ports

A large number of septic systems are equipped with monitoring ports and clean-outs. These ports will be white tubes or pipes with a cap on them that will protrude from the ground in your yard. These apertures allow the homeowner to monitor the amount of water in the drain field without having to dig up the drain field. For you, it serves as an indication of the exact location of your drain field! Because these ports are often cut quite near to the ground, it may take some research to locate them.

Sometimes you’ll discover them in your basement or in a closet, but other times you won’t. These ports will direct you to the correct location. It is common for a drain field to include clean-outs at both the beginning and end of the field.

Check Google Maps

You might be able to locate your septic tank field lines using satellites if you live in certain areas. Consider the following example: when we look at our home from a satellite view on Google Maps, we can clearly see where our drain field is located. Parallel lines, darker grass, and small depressions are all things you could notice. Using this zoomed-out, bird’s eye perspective, you will be able to inspect the area for anomalies.

Consult a Professional

You want to avoid wasting time and money, but there are occasions when consulting with a professional is the best course of action. Identifying your lines will be more difficult if they are hidden between the rocks of a rough terrain. Echolocators can be brought in by the professionals to pinpoint the exact placement of your field lines. Depending on the reason you’re seeking for your field lines, they may also be able to assist you with other chores.

Check the Distribution Box

It is always preferable to avoid wasting time and money, but there are occasions when consulting with an expert is the best option. Identifying your lines will be more difficult if they are hidden between the rocks. It is possible for the professionals to come out with echolocators in order to pinpoint the exact location of the field lines you have. According on the reason for your search for field lines, they may also be able to assist you with other chores.

Use Your Septic Tank

Knowing where your septic tank is, you can use a little intuition to locate your drain field if you know where it is. Our post on how to locate your septic tank can be found by clicking here. The most crucial thing to remember about your output port is that it is parallel to your intake port. The output port will, to a greater or lesser extent, orient you in the direction of your field line. At the very least, it will assist you in locating your distribution box, which will direct you to the field lines.

Check for Moisture

In general, your drain field should be swampier and wetter than the grass in the immediate vicinity. It will be a bit easier for you to look around as a result of this. If your lawn’s color is consistent and it’s difficult to distinguish between different areas, it’s time to bring in the heavy guns! Wait until a very challenging day before grabbing a stick or rod. Now, walk around your yard, poking your grass in various locations as you go. Where the earth yields more and is more moist is what you’re searching for.

Caution should be exercised when poking, since this might result in damage to your lines.

Understand the Size of Your Field

The size of your drain field will be determined by the amount of water you use and the size of your property. When you’re searching for anything, it’s frequently beneficial to keep in mind how broad your field is. It’s possible that huge area of green grass in the distance is your drain field.

You Might Also Like…

• POSTING a QUESTION OR COMMENT regarding locating the septic drainfield, soakaway bed, or leach field is encouraged.

POSTING a QUESTION OR COMMENT regarding locating the septic drainfield, soakaway bed, or leach field is encouraged.

Visual Clues that Indicate Drain Field Location

This article series, as well as our supporting SEPTIC COMPONENT LOCATION VIDEO, are available online. How to locate the leach field or drainfield section of a septic system is covered in detail in this video. We offer drawings and photographs to assist you in learning what to search for, as well as descriptions of numerous ways for locating underground drainfield components that are relevant in this situation. (Septic drain fields are sometimes referred to as soil absorption systems or seepage beds in some circles.) For further information, read How to Locate the Septic Tank.

• We come upon an area that, based on its size and lack of trees and rocks, is probably definitely the location of the drainfield – a fact that was subsequently confirmed by the property owner.
• Septic pumping systems will be required in this situation.
• Consider the scenario in which we have no paperwork and no knowledge where the drainfield is.
• The method is demonstrated in our video at the top of this page, which includes a site walkthrough.
• It is the septic tank outlet that determines where the effluent drain line that connects the septic tank and leach field will be located once the septic tank has been located in its entirety.
• Depending on the quantity of usage and soil qualities, there may or may not be a seepage pit present, but the septic system may appear to be operating properly anyway.
• We decided that the filled-in area in the front of our client’s property was the probable drainfield region based on the photo.
• In other words, the drain field did not have much of a life before its effluent flowed into groundwater, where it was detected by us as pink-dyed sewage in a nearby stream during our test.
• Knowing the most fundamental design factors will help you choose where to look for septic fields on a construction site based on the location of a working field that would be expected to be erected.
• A rather big and somewhat level expanse of elevated dirt or filled earth may be found on the land, which you can explore.
• A two-level or “tiered” septic mound was erected in the foreground of this photograph around 20 years ago; the bottom mound is visible in the background.

Rather than that, it was cleaning up septic effluent from the drive. If you know what to look for, you might be able to find some useful visual cues that point you in the direction of the drainfield.

Areas Cleared of Rocks and Major Trees Often Marks the Location of an Older Drainfield

Large trees and boulders are absent from this older and more mature grass, despite the fact that these objects may be found in other parts of the construction site. The septic tank and drainfield were intended to be located in this location. Leach field trenches are frequently visible as lengthy parallel depressions that run parallel to the ground. Although they are not visible in this photograph (a tank and seepage pit were discovered later), they are visible in the following portion of this article.

They may be apparent in systems that are hundreds of years old or younger.

They are about 24 to 30″ wide and many feet long, perhaps 20′ to 40′ and spaced perhaps 4′ to 6′ apart.

Areas of Snow Melt may Show Drainfield Layout, Trench Lines, Location

Drain field depressions may be easier to observe in northern regions when there is only a little layer of snow covering the ground for a handful of reasons:

1. It is easier to see depressions in the snow cover since it is a smooth covering, especially in late afternoon light when the sun is low in the sky and the shadows are more visible. It is possible that trench regions will be somewhat warmer than the surrounding soil due to septic effluent running into an in-use drainfield, allowing snow to melt or to be thinner over the trenches, therefore contributing to the “depression” effect.

Wet Areas may Show a (failing) Drainfield Location

It’s a shame, but when a leaching bed or drainfield is in failure mode, the location of the leaching bed or drainfield becomes visible. If a drainfield is failing and effluent is being forced to the surface, this is a very evident indication of the field’s location. The effluent breakout most frequently happens at the low-end of the failingdrainfield line(s), although it can occur wherever that a pipe is blocked, broken, or leaking, including the sewer line itself. Even with a thick layer of snow covering the ground in this photograph, which we will examine in greater detail below, the septic system failure and, consequently, the position of the septic field were clearly visible.

• It also offers other clues that indicate where you might expect to find the drainfield for the septic system.
• The author retains the right to use this content on other websites, in books, or in pamphlets that are available for purchase.
• Continue reading at this website.
• Alternatively, read SEPTIC TANK, HOW TO FIND for further information on locating the septic tank, chamber, drywell, or seepage pit.
• More videos about septic system installation and maintenance may be found at SEPTIC VIDEOSOR have a look at these

Septic Drainfield Location Articles

• Clearance Disturbances, Septic System
• Odors, Septic or Sewer
• Locations of Septic Components
• Septic Drainfield Inspection Test at Home
• Septic Drainfield Location
• Septic Drainfield Inspection Test at Work

• Clearance Disturbances, Septic System
• Odors, Septic or Sewer
• Locations of Septic Components
• Septic Drainfield Inspection Test at Home
• Septic Drainfield Location
• Septic Drainfield Inspection Test at Work

• SERVING SEPTIC DRAINFIELDS
• SEPTIC DRAINFIELD SIZE
• SEPTIC DRAINFIELD Shape
• SEPTIC DRAWINGS
• SEPTIC DRAINFIELD RESTORERS

Suggested citation for this web page

Inspect Apedia.com- an online encyclopedia of building and environmental inspection, testing, diagnosis, repair, and issue avoidance advice- to locate the drainfield. Alternatively, have a look at this.

INDEX to RELATED ARTICLES:ARTICLE INDEX to SEPTIC SYSTEMS

Alternatives include asking a question or searching InspectApedia using the SEARCH BOXfound below.

Ask a Question or Search InspectApedia

Questions, answers, and/or comments concerning issues relating to the functioning of aerobic septic systems are welcome. We encourage you to use the search box just below, or if you prefer, you may make a question or remark in theCommentsbox below and we will get back to you as soon as possible. InspectApedia is a website that allows you to search for things. Please keep in mind that the publication of your remark below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link.

We sincerely apologize for the inconvenience.

Technical ReviewersReferences

Citations can be shown or hidden by selecting Show or Hide Citations. InspectApedia.com is a publisher that provides references. Daniel Friedman is an American journalist and author.

How To Find Septic Tank Location: A Guide for Property Owners

The majority of individuals prefer to relax on their back patio or porch and take in the scenery rather than worrying about where their septic tank could be. When you know exactly where your septic tank is, it will be much easier to schedule routine sewer line cleanouts and repair appointments. Continue reading to find out more about how to locate your septic tank.

Follow the Main Sewer Line

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your property. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about down there. Look for a pipe with a diameter of around four inches that is leading away from your home or building. Keep a note of the position of the sewer pipe and the point at which the line exits your home so that you can locate it outdoors.

If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your home.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may have to probe a bit further out before striking the tank.

Inspect Your Property

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your yard. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about in it. Look for a pipe with a diameter of around four inches that is leading away from your home or business. Recall where your sewer pipe is located, as well as where it exits your home, in order to locate it while you are out in the field.

If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your house.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may need to probe a bit further out before striking the tank.

• Paved surfaces
• Unique landscaping
• Your water well, if you have one
• And other features.

Surfaces with pavers; special landscaping; your water well, if you have one; and other features.

Check the Property Records

Are you unsure about how to obtain this? Simply contact your county’s health department for further information. Check with your local health agency to see if they have a property survey map and a septic tank map that you can borrow. Perhaps you will be shocked to learn that there are a variety of options to obtain information about your property without ever leaving the comfort of your own residence. Building permits, for example, are frequently found in county records, and they may provide schematics with specifications on how far away from a septic tank a home should be, as well as other important information such as the size of the tank.

Most counties, on the other hand, keep records of septic tank installations for every address.

Don’t Try to Fix Septic Tank Issues Yourself

Septic tank problems should be left to the specialists. The Original Plumber can do routine maintenance on your septic tank and examine any problems you may have once you’ve located the tank. It is not recommended to open the septic tank lid since poisonous vapors might cause major health problems. Getting trapped in an open septic tank might result in serious injury or death. While it is beneficial to know where your septic tank is located, it is also beneficial to be aware of the potential health dangers associated with opening the tank.

Schedule Septic Tank Maintenance

Professionals should handle septic tank difficulties. The Original Plumber can do routine maintenance on your septic tank or examine any problems you may have once you’ve located the tank. Opening the septic tank lid might result in major health consequences due to the noxious vapors that are expelled. It is possible to sustain serious harm or even death if one falls into an open septic tank. Knowing where your septic tank is and how to locate it is beneficial, but it is also important to be aware of the potential health dangers associated with opening the tank.

Frequently Asked Questions

A septic system is a system for the management of wastewater. Simply said, wastewater will exit your home through pipes until it reaches your septic tank, which is located outside your home. Septic tanks are normally located beneath the surface of the earth. Solids and liquids will separate in the septic tank as a result of the separation process. Eventually, the solids will fall to the bottom of the tank and the liquids will run out onto your leach field.

How do I know if I have a septic tank?

Even if there are no obvious signs of a septic tank in your yard – such as uneven landscaping – there are a few techniques to assess whether or not your home is equipped with an onsite sewage system. Checking your property records is the most reliable technique to ensure that you are utilizing the correct system. When you acquired your house, you should have received a copy of the septic system map with the property documents as well. Checking your electricity statement is another way to determine this.

If you’re also using well water, it’s possible that you won’t receive one at all. If you do not have a meter installed, it is likely that you are connected to a private well rather than the public sewage network.

What do I do once I locate my septic tank?

Once you’ve discovered where your septic tank is, there are a few things you should do. It is critical to clearly mark the position of your septic tank. With our inspection, pumping, and repair services, you can save time whether you need a sewer line cleanout or a septic tank maintenance job completed quickly. Make a note of the location of your tank so that you can find it again if necessary. It should be heavy enough so that it does not fly away in windy conditions. A creative approach to accomplish this without having an unattractive flag or marking in your yard is to use garden décor or a potted plant.

This way, you’ll have it for future reference and will be able to quickly locate the exact position if necessary.

Then contact The Original Plumber to have your septic system maintained on a regular basis.

All of the heavy lifting has been delegated to our team of professionals.

Locate Your Drainfield

You know your septic system drainfield is out there� but just where is it? It is important to locate it so you can avoid damaging it by:

• Building a road over the drainfield
• Parking or operating heavy equipment on the drainfield
• Planting trees or bushes in close proximity to a drainfield is prohibited. Creating soil disturbances through a landscaping project or the presence of cattle

In addition, knowing where your drainfield is located allows you to inspect the drainfield for symptoms of trouble, such as damp soil and foul aromas. You should obtain a copy of the record sketch for your particular system. It is a diagram that shows where the various components of your septic system are placed. This diagram was previously referred to as a “as-built” or “record drawing.” You can obtain further information by contacting the Thurston County Permit Assistance Center (PAC) at 360-786-5490 or by downloading the Request for Record Drawing/Permit Information form.

SW in Olympia, Washington (PAC Hoursof Operation-LimitedHours Please Check Before You Leave).

This is the tax identification number that appears on your county tax bills.

(If you do not know your tax parcel number, contact the County Assessor’s office.) The level of detail and quality of the record drawings varies substantially.

a more recent diagram will indicate the tank, drainfield, replacement area (which will be used in the future if a replacement field is required), and any additional components of your system, such as a pump chamber or mound It is also possible to record the dimensions of the tank and the length of the drainfield lines.

• If you don’t water your grass in the late summer, you may notice green stripes in your yard as a result. These are the regions that are prone to flooding along the drainfield pipes. When it is cold outside, the regions above your pipes may be the first spots where frost melts in your yard. Do you have any ports for monitoring or clean-outs? These are tubes or pipes with a white cap that are cut off at or near the ground level. Drainfield pipes include liquid level indicators that are situated at the ends of the pipes, which allow you to monitor the amount of liquid in the pipes. Examine the regions leading away from the septic tank with great caution. Avoid the use of heavy steel wrecking bars or other probing equipment that might cause damage to the septic tank top or other components of the system. Take note of any signs you see, such as shallow, parallel depressions that may indicate drainfield trenches. The installation of a drainfield among huge trees or in particularly rough terrain is quite unlikely. Examine the area beneath the home where the sewer line emerges from the foundation. The septic tank is typically located within 10 feet of the foundation
• However, this might vary. Engage the services of a competent business to send down echo-locators

For more information on troubleshooting problems,contact the Septic Help Line at 360-867-2669.

How to Locate a Septic Drainfield or Septic Tank – GeoModel

Landowners must be aware of how to find buried septic tanks or underground septic drainfield pipelines on their property. What is the most effective technique of locating a septic tank or a septic drainfield, and why? Underground septic tanks and buried septic drainfield pipe lines can only be detected and located with the use of ground penetrating radar, which is the most accurate approach available. GeoModel, Inc. has over 25 years of expertise in the detection and location of underground septic tanks and septic drainfields throughout the United States.

1. Ground penetrating radar (GPR) and frequency location are two of the technologies used to locate septic tanks and septic drainfields, respectively (to detect any buried electrical power lines associated with the drainfield system).
2. personnel who are experts in the field.
3. conducts a ground penetrating radar (GPR) study to find and detect a septic drainfield.
4. As soon as a GeoModel, Inc.
5. An picture of a ground penetrating radar (GPR) cart in the process of identifying septic drainfield lines is shown in the following paragraph: GPRG is a technique for detecting a septic drainfield.
6. Plastic or PVC drainfield pipe, as well as other forms of nonconductive pipe, such as concrete and terra cotta septic drainfield pipe, can be located using GPR, especially under appropriate soil conditions.
7. An subterranean cross-sectional picture of the septic drainfield pipes is obtained using GPR, allowing the locations of the drainfield pipes to be determined.

Like a rule of thumb, the drainfield pipes should appear as upside-down U-shapes (parabolas).

The drainfield pipes in the illustration below are around one to one and a half to two feet below the surface of the earth.

GeoModel, Inc.

A frequency transmitter is used to apply a specified frequency to a buried power wire that is buried underground.

Ground penetrating radar has been used by GeoModel, Inc.

An orange paint mark indicates the position of a subterranean septic tank, which was discovered using ground penetrating radar (GPR).

Obtain our underground septic tank and septic drainfield locating services for your property or facility now by contacting GeoModel, Inc.

How to Locate a Septic Tank

Landowners must be aware of how to find buried septic tanks or underground septic drainfield pipelines in their property. The most effective way of determining the location of a septic tank or septic drainfield is described here. Underground septic tanks and buried septic drainfield pipe lines can only be detected and located with the use of ground penetrating radar, which is the most effective approach available. Located underneath septic tanks and septic drainfields around the country, GeoModel, Inc.

• GeoModel, Inc.’s septic tank and septic drainfield detection technicians utilize only the most up-to-date technology and procedures to find underground sewage and drainfield systems.
• Detecting septic tanks and septic drainfield pipes is something that GeoModel, Inc.
• GeoModel, Inc.
• It is necessary to move the GPR system over the ground in parallel directions (transect lines) that are perpendicular to the drainage pipes.
• GPR specialist notices it in the GPR picture captured by the GPR.
• Learn how to use the GPRG to detect the presence of a septic drainfield.
• Plastic or PVC drainfield pipe, as well as other forms of nonconductive pipe, such as concrete and terra cotta septic drainfield pipe, can be located using GPR, especially in ideal soils.

Where do septic drainfield lines come into play with GPR?

This section contains an example GPR profile obtained during an underground septic drainfield locating survey.

(parabolas).

It is approximately 1 to 1.5 feet beneath the ground surface where the drainfield pipes are located in this illustration.

GeoModel, Inc.

Through the use of a frequency transmitter, a precise frequency may be applied to underground electrical cables.

Ground penetrating radar has been used to detect a large number of septic tanks and septic drainfield pipe networks across the United States.

as well as the same location once the septic tank has been revealed.

Using ground penetrating radar, this example demonstrates how a septic tank may be discovered and found (GPR). GeoModel, Inc. can provide you with underground septic tank and septic drainfield location services for your property or facility right away.

1.Follow the Outgoing Sewer Pipe

Look for the four-inch sewage pipe that runs through the structure and the location where it exits the building in the basement or crawl space. Locate the location outside the building where the pipe exits the building or the location of an access cover over the pipe. It is required that septic tanks be at least five feet away from the structure, although they are usually between 10 and 25 feet away. You may follow the pipe all the way to the tank using a metal probe. It is important to note that sewage lines may curve and run around the corner of a building rather than following a straight path to the holding tank.

2.Search for Septic Tank Risers and Lids

Depending on their age, septic tanks are either one- or two-compartment structures. Each compartment has a cover, with two additional lids for dual-compartment tanks that were added later. If the tank includes an access point known as a riser, the lid may be readily visible from outside. Look for round, plastic discs that are about a foot or two in diameter. Due to the fact that the lids might be flush with the ground or just a few inches above it, they can get overrun with grass and other plants over time.

Tanks without risers are likewise equipped with lids, however they are located underground.

3.Find the Drain Field First

In the absence of a riser and lid, search for indicators of a drain field, such as an area of grass that grows more quickly or more slowly than the rest of the yard, grass that is a different color from the rest of the yard, or areas where snow melts more quickly than in other parts of the yard. Spots of high or low ground in the yard might possibly indicate the presence of a subterranean tank or drain field. You will be able to discover the tank if you probe these regions.

Reasons to Hire a Contractor for Help

In the absence of a riser and lid, search for indicators of a drain field, such as an area of grass that grows more rapidly or more slowly than the rest of the yard, grass that is a different color from the rest of the yard, or areas where snow melts more quickly than in other areas of the yard. High or low patches in the yard might potentially be an indication of an underground tank or drain field in the vicinity. You will be able to locate the tank by probing these regions.

• Soil that is sinking around the tank or drain field. Drainage backup into the home’s sewer system, or toilet backup
• A foul odor in the area where you assume the tank and drain field are located
• When there is no rain, pooling water, muddy soil, or spongy grass might occur. Septic tank covers that are rusted, cracked, or have been replaced with improvised lids are prohibited.

Even though you may be ashamed about forgetting where your septic tank is, it is a very frequent problem among homeowners. A contractor may assist you in locating it, and he or she may do it as part of the pumping service. If you need assistance locating your tank or if you have any other questions, please contact us at 503-630-7802. We are available to assist you!

A Beginner’s Guide to Septic Systems

• Septic systems are used to dispose of waste from homes and buildings. Identifying the location of the septic tank and drainfield
• What a Septic System Is and How It Works Keeping a Septic System in Good Condition
• Signs that a septic system is failing include:

Septic systems, also known as on-site wastewater management systems, are installed in a large number of buildings and houses. It is easy to lose sight of septic systems, which operate quietly, gracefully, and efficiently to protect human and environmental health due to their burying location.

Septic systems are the norm in rural regions, but they may also be found in a lot of metropolitan places, especially in older buildings. It is critical to understand whether or not your building is on a septic system.

Is Your Home or Building on a Septic System?

It is possible that the solution to this question will not be evident. If a structure looks to be connected to a sewage system, it may instead be connected to a septic system. It is fairly unusual for tenants to be unaware of the final destination of the wastewater generated by their residence. Some of the hints or signs listed below will assist in determining whether the facility is served by a septic system or whether it is supplied by a sewer system:

• Sewer service will be provided at a cost by the city or municipality. Pay close attention to the water bill to see whether there is a cost labeled “sewer” or “sewer charge” on it. If there is a fee for this service, it is most likely because the facility is connected to a sewage system. Look up and down the street for sewage access ports or manholes, which can be found in any location. If a sewage system runs in front of a property, it is probable that the house is connected to it in some way. Inquire with your neighbors to see if they are connected to a sewer or septic system. The likelihood that your home is on a sewer system is increased if the properties on each side of you are on one as well. Keep in mind, however, that even if a sewage line runs in front of the structure and the nearby residences are connected to a sewer system, your home or building may not be connected to one. If the structure is older than the sewer system, it is possible that it is still on the original septic system. Consult with your local health agency for further information. This agency conducts final inspections of septic systems to ensure that they comply with applicable laws and regulations. There is a possibility that they have an archived record and/or a map of the system and will supply this information upon request

All property owners should be aware of whether or not their property is equipped with an on-site wastewater treatment system. Georgia law mandates that the property owner is responsible for the correct operation of a septic system, as well as any necessary maintenance and repairs.

Locating the Septic Tank and Drainfield

Finding a septic system may be a difficult process. They can be buried anywhere in the yard, including the front, back, and side yards. After a few years, the soil may begin to resemble the surrounding soil, making it impossible to distinguish the system from the surrounding soil. It is possible that in dry weather, the grass will be dryer in the shallow soil over the tank and greener over the drainfield, where the cleansed water will be released, but this is not always the case, especially in hot weather.

• The contractor who built the house should have presented the initial owner with a map showing the tank and drainfield locations, according to the building code.
• The installation of the system, as well as any modifications made to it, would have been examined by your local health authority.
• Unfortunately, if the system is very old, any records related with it may be insufficient or nonexistent, depending on the situation.
• Look for the point at where the wastewater pipes join together if the building is on a crawlspace or has an unfinished basement.
• The sewer line that runs through the structure is referred to as the building sewer.
• To “feel” for the tank, use a piece of re-bar or a similar metal probe.
• If you use this free service, you may avoid accidentally putting a rod through your gas or water line.

Try to locate the tank after a rainstorm, when the metal probe will be more easily maneuvered through moist dirt.

This should be done with care; extreme caution should be exercised to avoid puncturing the building sewer.

A tank is normally 5 by 8 feet in size, however the dimensions might vary.

Be aware that there may be rocks, pipes, and other debris in the area that “feels” like the tank but is not in fact part of the tank.

However, it is possible to have the lid or access port positioned on a riser in addition to being on the same level as the top of the tank in some cases.

Once the tank has been identified, make a rough drawing of its placement in relation to the house so that it will not be misplaced again!

It may be easier to discover the drainage lines now that the tank has been identified, particularly if the area has been subjected to prolonged periods of drought.

How a Septic System Works

Typical sewage treatment system (figure 1). It is composed of three components (Figure 1): the tank, the drain lines or discharge lines, and the soil treatment area (also known as the soil treatment area) (sometimes called a drainfield or leach field). The size of the tank varies according to the size of the structure. The normal home (three bedrooms, two bathrooms) will often include a 1,000-gallon water storage tank on the premises. Older tanks may only have one chamber, however newer tanks must have two chambers.

1. The tank functions by settling waste and allowing it to be digested by microbes.
2. These layers include the bottom sludge layer, the top scum layer, and a “clear” zone in the center.
3. A typical septic tank is seen in Figure 2.
4. It is fortunate that many of the bacteria involved are found in high concentrations in the human gastrointestinal tract.
5. Although the bacteria may break down some of the stuff in the sludge, they are unable to break down all of it, which is why septic tanks must be cleaned out every three to seven years.
6. In addition, when new water is introduced into the septic tank, an equal volume of water is pushed out the discharge lines and onto the drainfield.
7. The water trickles out of the perforated drain pipes, down through a layer of gravel, and into the soil below the surface (Figure 3).
8. A typical drainfield may be found here.
9. Plants, bacteria, fungus, protozoa, and other microorganisms, as well as bigger critters such as mites, earthworms, and insects, flourish in soil.
10. Mineralogical and metallic elements attach to soil particles, allowing them to be removed from the waste water.

Maintaining a Septic System

The most typical reason for a septic system to fail is a lack of proper maintenance. Septic systems that are failing are expensive to repair or replace, and the expense of repairs rests on the shoulders of the property owner (Figure 4). Fortunately, keeping your septic system in good working order and avoiding costly repairs is rather simple. Figure 4. Septic system failure is frequently caused by a lack of proper maintenance. It is in your best interests to be aware of the location of the system, how it operates, and how to maintain it.

• You should pump the tank if you aren’t sure when the last time it was pumped.
• It is not permissible to drive or park over the tank or drainage field.
• No rubbish should be disposed of in the sink or the toilet.
• It’s important to remember that garbage disposals enhance the requirement for regular pumping.
• When designing a landscape, keep the septic system in mind.
• It is also not recommended to consume veggies that have been cultivated above drainfield lines (see Dorn, S.
• Ornamental Plantings on Septic Drainfields.

C 1030).

Any water that enters your home through a drain or toilet eventually ends up in your septic system.

Don’t put too much strain on the system by consuming a large amount of water in a short period of time.

Additives should not be used.

Various types of additives are available for purchase as treatment options, cleansers, restorers, rejuvenator and boosters, among other things.

To break up oil and grease and unclog drains, chemical additives are available for purchase.

Pumping out the septic tank is not eliminated or reduced by using one of these systems.

They remain floating in the water and travel into the drainfield, where they may block the pipes. Acids have the potential to damage concrete storage tanks and distribution boxes.

Signs a Septic System is Failing

A failed system manifests itself in the following ways:

• Sinks and toilets drain at a snail’s pace
• Plumbing that is backed up
• The sound of gurgling emanating from the plumbing system House or yard aromas that smell like sewage
• In the yard, there is wet or squishy dirt
• Water that is gray in hue that has accumulated
• An region of the yard where the grass is growing more quickly and is becoming greener
• Water contaminated by bacteria from a well

If you notice any of these indicators, you should notify your local health department immediately. An environmentalist from the health department can assist in identifying possible hazards. There are also listings of state-certified contractors available from the local health department, who may do repairs. Repairs or alterations to the system must be approved by the health department and examined by an inspector. Keep an eye out for any meetings that may take place between a health department inspector and a contractor to discuss repairs to your system.

• Household garbage that has not been properly handled is released into the environment when systems fail.
• It has the potential to pollute surrounding wells, groundwater, streams, and other sources of potable water, among other things.
• The foul odor emanating from a malfunctioning system can cause property values to plummet.
• Briefly stated, broken systems can have an impact on your family, neighbors, community, and the environment.
• Septic systems are an effective, attractive, and reasonably priced method of treating and disposing of wastewater.

Figures 2 and 3 reprinted with permission from: CIDWT. 2009. Installation of Wastewater Treatment Systems. Consortium of Institutes for Decentralized Wastewater Treatment. Iowa State University, Midwest Plan Service. Ames, IA.

History of the current status and revisions Published on the 15th of August, 2013. Published on March 28th, 2017 with a full review.