How To Find My Septic Tank Leech Field System? (Question)

• To find the septic tank field lines start the search from your home. Keep tracing the drain lines towards the septic tank. The septic tank will be installed at least 10-20 feet from the exterior. Since the tank is located just to the opposite side of the house, drain lines go to the leach field. Look at the naturally sloping land and you will be able to find the leach field.

Are septic tank locations public record?

Contact your local health department for public records. These permits should come with a diagram of the location where the septic system is buried. Depending on the age of your septic system, you may be able to find information regarding the location of your septic system by making a public records request.

How do I know if my septic tank has a drainage field?

Some of the signs that your property has a septic tank are:

1. The tank needing to be emptied each year.
2. 2, 3 or 4 manholes in close proximity to each other above ground.
3. Possible vent pipes above ground – these take unpleasant smells and gasses from the tank and distribute them into the air.

How do you find a metal detector with a septic tank?

6 Steps to Locate a Septic Tank

1. Find Your Main Sewer Drain Line. Sewage from your toilets, sinks, and showers collects into a main drain line.
2. Check Permits and Public Records.
3. Determine Septic Tank Material.
4. Time to Dig.
5. Mark the Location for Future Maintenance.

How do I know if my drain field is bad?

Stay vigilant for five signs your drainfield does not drain correctly anymore.

1. Slowing Drainage. Homeowners first notice slower than usual drainage from all the sinks, tubs, and toilets in a home when they have a compromised drainfield.
2. Rising Water.
3. Increasing Plant Growth.
4. Returning Flow.
5. Developing Odors.

How do you measure a leach field?

Effective Leaching Area – The size of the leachfield is determined by the total of the areas of the trench bottom and sidewalls beneath the leach pipe. Example: A trench that is four feet deep, 1 ½ feet wide and 50 feet long with the leach pipe on top of 2 ½ feet of drain rock, has an effective leaching area of 325 sq.

Can you have a septic tank without a leach field?

The waste from most septic tanks flows to a soakaway system or a drainage field. If your septic tank doesn’t have a drainage field or soakaway system, the waste water will instead flow through a sealed pipe and empty straight into a ditch or a local water course.

How big is a leach field?

The leach field is a series of trenches that may be up to 100-feet long and 1 foot to 3 feet in width, separated by six feet or more, depending on local requirements, and sometimes constructed leaving space between the original lines to install replacement leach lines when needed.

Do old septic tanks have lids?

If your septic tank was installed after 1975, it will probably have two polyethylene or fiberglass lids centered at opposite sides of the perimeter. Older tanks will typically have a 24-inch concrete lid right in the center of the tank. Excavate in those locations to reveal the lids.

Can you use a metal detector to find sewer lines?

Using a Plumbing Pipe Detector to Locate Underground Pipes. As a property owner there will be times when, for a variety of reasons, you will need to locate underground metal objects. For example, using a pipe locator metal detector you can easily pinpoint leaking underground pipes quickly.

Are septic tanks metal?

Steel Septic Tank—Steel septic tanks are the least durable and least popular tank option. Designed to last no more than 20-25 years, they can be susceptible to rust even before that. Steel top covers can rust through and cause an unsuspecting person to fall into the tank.

Are septic tanks made of metal?

The majority of septic tanks are constructed out of concrete, fiberglass, polyethylene or coated steel. Typically, septic tanks with a capacity smaller than 6,000 gallons are pre-manufactured. Larger septic tanks are constructed in place or assembled on-site from pre-manufactured sections.

How to Find My Septic Tank Lines

Credit: Petegar/E+/Getty Images for the image

In This Article

• Septic System Fundamentals
• Identifying and Locating a Septic Tank on Your Property
• Conducting Regular Inspections
• Checking for Clean-Outs
• Identifying Natural Indicators
• Viewing System Diagrams
• Seek Professional Assistance
• Check the distribution box
• Understand the size and scope of the project.

Are you curious about the location of your septic lines? It is critical to know where the septic tank is located on a property in order to properly manage and preserve the system. For example, you don’t want to pave over the ground or grow trees too close together in a forest. It is possible to obtain a copy of the septic tank diagram of the drain field, which will give you a fair sense of where the pipes will go. If this is not the case, you may need to attempt some other methods of locating septic drain lines.

The solids and liquids are separated within the tank by a baffle or wall that is built inside the tank.

When pipes get clogged or when drain fields become too saturated with fluids, problems arise.

Locating a Septic Tank on Your Property

Are you unsure about the location of your septic lines? It is critical to know where the septic tank is located on a property in order to properly manage and preserve it. In order to avoid paving over the area or planting trees too close together, for example, you should avoid the following: It is possible to obtain a copy of the septic tank diagram for the drain field, which will give you a fair understanding of where the pipes are routed through the system. Other methods of locating septic drain lines may be required in the event that the first method fails.

The tank holds solids, while the leach field drains liquids.

Flowing into the earth is a drain line that links to perforated pipes that have been excavated into trenches and set on a bed of gravel, where the liquids are absorbed by the ground.

Misplacement, design defects, and bad installation are some of the other issues.

Perform Regular Inspection

According to industry experts, you should examine your septic tanks and, if required, pump them out once every three years. If you are experiencing gurgling sounds in your house or water backing up after your system has been repaired, a saturated drain field might be the source of the problem. Drain fields that have been clogged or damaged are unable to be rectified. In order for the septic system to function properly again, you’ll need to have a new drain field installed. Find capped clean-outs that are a few inches vertically above the ground in the leach field itself, or check behind a wall or in a closet in the basement for capped clean-outs.

1. You can visually trace the orientation of the pipe from the clean-out if there is no other information available.
2. Credit: Kyryl Gorlov/iStock/Getty Images for the image.
3. When you are looking for the lines, look for grass or vegetation that greens in stripes when the grass surrounding it browns.
4. Putting hot water into your system might cause snow or ice to melt above the drain pipes if the system is not properly insulated.
5. If you have a deep system, as is the case for homes with basements, you will most likely not be able to observe natural signs since the drain field is too deep to be seen from above.
6. Unless the system was built without a permit, the blueprints or designs for septic system installations are kept on file with the local health authority until the system is operational.
7. If your search does not provide any relevant results, you can request a record search based on your street address or the tax account number associated with the property.
8. If the agency has a copy of the record, they will mail it to you.
9. If you don’t have a drawing of the septic system, you need enlist the assistance of a disposal system contractor or a certified liquid waste transporter to find it.

Another option is to purchase a flushable transmitter from a plumbing or rental business, or you may contract with a tank cleaning firm. The signal from the transmitter is picked up by a hand-held receiver after it has been flushed down the toilet.

Check the Distribution Box

There are certain septic tanks that feature an extra distribution box that is located a few feet from the tank on the tank’s downstream side. Water is channeled into the trenches by ports and pipes in the box. It is recommended that, if your system includes a distribution box, the box’s top be designed to expose the orientation of the ports that connect to the drain field lines. It is feasible to locate the box with a probe, but extreme caution should be exercised. Avoid applying excessive force to the probe, since this may result in damage to the box.

In most cases, individual drain lines run perpendicular to the intake line, but they may also branch into an H-pattern or other patterns that are appropriate for the terrain.

Find the location of your septic drain lines so that you can safeguard the area in and around them with a little detective work.

How to locate your septic tank and your drainfield

Septic systems on-site are used for accepting and treating wastewater in homes that are not linked to the municipal wastewater management system. A septic system is comprised of three components: a septic tank, a drain field, and piping. As a homeowner, it is your responsibility to properly operate and maintain your septic system in order to avoid system failure. For example, depending on the legislation in your area, you may be compelled to pump it on a regular basis. It is impossible to perform maintenance operations, however, if you do not know where the tank is located.

Steps to follow to locate your septic tank and drain field

Houses that are not linked to the municipal wastewater management system rely on onsite septic systems for the collection and treatment of waste. In addition to the septic tank and drain field, the septic system also includes piping. Operating and maintaining your septic system as a homeowner is essential in order to avoid it from malfunctioning. As an example, depending on the local restrictions, you may be forced to pump it more regularly. However, if you do not know where the tank is, you will be unable to do maintenance activities.

On-site septic systems are used to collect and treat wastewater in homes that are not linked to the municipal wastewater management system.

As a homeowner, it is your responsibility to maintain and run your septic system in order to avoid it from failing.

For example, depending on the local restrictions, you may be compelled to pump it on a regular basis. However, you will be unable to perform maintenance procedures if you do not know where the tank is located. You can identify your septic tank by following a few simple procedures.

As soon as you’ve discovered the sewer outlet in your basement, you may use it to figure out where the sewer line departs your home through an outside wall. The septic tank will be located a few meters away from the home, and the outflow pipe may be at an angle of 30 or 45 degrees from the house. As a result, it is probable that the tank will be positioned around the corner from the building. Work your way around the home in a circle, starting at an electrical outlet and continuing until you find the septic tank.

Tips for locating your septic tank

Septic tank lids should be visible from the outside. An underground riser may have been added, which will make it simple to find your septic tank in some instances. However, it is conceivable that the septic tank cover is buried underground, which is especially true for older homes. Following are some pointers to assist you in locating the septic tank in this and other similar situations.

• Septic tank lids should be visible from the outside. If your septic tank has a riser built, it will be much easier to find your septic tank in some circumstances. The septic tank lid, on the other hand, might be located below ground level, which is particularly true for older homes. In these and other situations, the following guidelines might assist you in locating the septic tank.

Depending on whether the septic tank is above or below ground, you may have to dig to get to it. Construction materials for septic tanks include concrete, fiberglass, or plastic, and their shapes can range from oblong to cylindrical to rectangular. The majority of modern septic tanks will have their lids positioned in the center of the tank, and the lid should be within three feet of the ground surface in most cases. However, depending on a variety of conditions, such as farming and other human activities on the property, it is conceivable that it will be significantly deeper.

Additionally, you may use a small steel rod to probe the earth in order to pinpoint exactly where the tank is located as you continue digging.

Inspecting the tank

It is critical to thoroughly inspect and evaluate your septic tank and its contents when it has been identified. First and foremost, you may unscrew the lid to inspect the scum and sludge layer beneath it. In addition, the use of tracer dye tablets allows you to check the septic tank without having to dig it up. If you use tracer dye pills, all you have to do is flush them down the toilet and wait for a maximum of two days. Because of the way the tablets dissolve in water, if there is a problem with the septic system, you will see that the leach field has a glowing green hue surrounding it.

It is possible that someone will fall into the tank, causing significant damage or possibly death.

Conclusion

You can identify your septic tank without assistance from a professional, but it is a good idea to have someone who is properly educated in septic tank maintenance examine and maintain your septic tank on your behalf. The effluent filter in your tank should be washed into the open septic tank rather than on the ground in your yard if your tank has one. It may also be a good idea to make a note of the position of the septic tank when it has been discovered. This will be beneficial to anyone else who may require access to the septic tank in the future.

Septic tanks release combustible and hazardous gases, and as a result, they must be located in an open area.

How to Locate Your Drain Field

Homeownership entails a large number of duties. Making repairs to the house, keeping the lawns, caring for the landscaping, paying all kind of bills and taxes, and a slew of other responsibilities are required. But it’s all worth it when you finally get to purchase your own house. Consider the following scenario: you have acquired a home in Modesto, CA that has a septic tank installation. Regardless of whether you are familiar with septic systems or not, you must be aware of the location of the tank and drain field.

In light of this, we would like to provide you with some expert guidance to assist you in locating your drain field.

A few sewage system pipe routes are easy to identify in the yard, while others are more difficult to locate.

• First, take a look around your yard. It’s typical for you to not notice any indicators of your drain field’s presence at first sight. For starters, go around your yard, checking for lines of green grass, dead grass, and sunk-in regions (front, rear, and sides). If you see any of them, go ahead and investigate since these are indications of a drain field installation. Examine the surrounding region for markers: Ideally, a cement marker the size of a manhole cover should be used to indicate the position of your septic tank. Try to find it between 10 and 20 feet away from your house. As soon as you’ve located the tank, head down the steepest slope and look for an empty downward-sloping field to hide in. It’s possible that you’ve just discovered your drain field. Check your yard for gravel by doing the following: Another option is to probe your yard and feel for gravel, because drain field lines are covered in gravel as a manner of guiding wastewater through the treatment process and are therefore difficult to detect. If you come across gravel, you may have discovered your property’s drain field. Please be aware that probing may be difficult in regions where the soil is hard or rocky
• Thus, caution is advised. Examine the county’s records: A copy of your property’s septic records may be on file with your county’s permits department or with the business that built the septic system in its first place. Read the notes left by past owners: Another option is to inquire with the former owners about the location of the drain field. Even if this isn’t possible, look in the garage, cupboards, and bathroom areas for notes or instruction manuals that may have been left for you by the previous residents. When people are preparing to move, they may gather all of the owners’ manuals or write out their own notes on how to use and maintain specific appliances or systems in the house, as well as important information about the products (age, maintenance records, and so on). There’s also a chance that they’ve sketched out the location of the drain field. Request information from neighbors:You should make yourself known to your immediate neighbors as soon as possible after moving into your new house. This is an excellent moment to inquire as to whether or not they are aware of the location of your drain field.

Alvarado Pumping Septic Service is the company to call in Modesto, California, for the best septic maintenance, drain field services, and septic tank installation you can find. Our septic system professionals are here to assist you at any time with your house or business’ septic system!

Most likely Locations to Look

• POSTING a QUESTION OR COMMENT regarding locating the septic drainfield, soakaway bed, or leach field is encouraged.

InspectAPedia does not allow any form of conflict of interest. The sponsors, goods, and services described on this website are not affiliated with us in any way. Finding the seepage beds or leaching field using visual indicators can be accomplished as follows: What exactly should you look for while looking for the septic drainfield or soakaway bed? This article assists you in locating a septic tank, D-box, soakaway bed or drainfield, and other components by identifying sites on a construction site where such components may have been installed and should have been installed.

Use the SEARCH BOX to discover the information you’re looking for quickly.

Visual Clues that Indicate Drain Field Location

Conflicts of interest are not tolerated at InspectAPedia.com. No affiliation exists between us and any sponsors, products, or services mentioned on this website. Visual clues to locate seepage beds or a leaching field are as follows: To locate the septic drainfield or soakaway bed, you must know exactly where to look. A septic tank, D-box, soakaway bed or drainfield, and other components can be found by identifying sites on a construction site where such components might fit and should have been built, as described in this article.

Use the SEARCH BOX to locate the information you require quickly.

Areas Cleared of Rocks and Major Trees Often Marks the Location of an Older Drainfield

Large trees and boulders are absent from this older and more mature grass, despite the fact that these objects may be found in other parts of the construction site. The septic tank and drainfield were intended to be located in this location. Leach field trenches are frequently visible as lengthy parallel depressions that run parallel to the ground. Although they are not visible in this photograph (a tank and seepage pit were discovered later), they are visible in the following portion of this article.

They may be apparent in systems that are hundreds of years old or younger.

Long parallel depressions, possibly 24 to 30″ wide and many feet long, perhaps 20′ to 40′ and placed perhaps 4′ to 6′ apart, are suggestive of drain field trenches. They are about 24 to 30″ wide and many feet long, perhaps 20′ to 40′ and spaced perhaps 4′ to 6′ apart.

Areas of Snow Melt may Show Drainfield Layout, Trench Lines, Location

Drain field depressions may be easier to observe in northern regions when there is only a little layer of snow covering the ground for a handful of reasons:

1. It is easier to see depressions in the snow cover since it is a smooth covering, especially in late afternoon light when the sun is low in the sky and the shadows are more visible. It is possible that trench regions will be somewhat warmer than the surrounding soil due to septic effluent running into an in-use drainfield, allowing snow to melt or to be thinner over the trenches, therefore contributing to the “depression” effect.

Wet Areas may Show a (failing) Drainfield Location

It’s a shame, but when a leaching bed or drainfield is in failure mode, the location of the leaching bed or drainfield becomes visible. If a drainfield is failing and effluent is being forced to the surface, this is a very evident indication of the field’s location. The effluent breakout most frequently happens at the low-end of the failingdrainfield line(s), although it can occur wherever that a pipe is blocked, broken, or leaking, including the sewer line itself. Even with a thick layer of snow covering the ground in this photograph, which we will examine in greater detail below, the septic system failure and, consequently, the position of the septic field were clearly visible.

1. It also offers other clues that indicate where you might expect to find the drainfield for the septic system.
2. The author retains the right to use this content on other websites, in books, or in pamphlets that are available for purchase.
3. Continue reading at this website.
4. Alternatively, read SEPTIC TANK, HOW TO FIND for further information on locating the septic tank, chamber, drywell, or seepage pit.
5. More videos about septic system installation and maintenance may be found at SEPTIC VIDEOSOR have a look at these

Septic Drainfield Location Articles

• Clearance Disturbances, Septic System
• Odors, Septic or Sewer
• Locations of Septic Components
• Septic Drainfield Inspection Test at Home
• Septic Drainfield Location
• Septic Drainfield Inspection Test at Work

• LOCATION OF THE DRAINFIELD PIPE, EXACT
• EXCAVATE TO LOCATE THE DRAINFIELD
• REASONS FOR LOCATION OF THE DRAINFIELD
• Recordings to LOCATE the DRAINFIELD
• SURPRISING DRAINFIELD LOCATIONS
• UNLIKELY DRAINFIELD LOCATIONS
• VISUAL CLUES LOCATE the DRAINFIELD
• VISUAL CLUES LOCATE the SEPTIC TANK

• SERVING SEPTIC DRAINFIELDS
• SEPTIC DRAINFIELD SIZE
• SEPTIC DRAINFIELD Shape
• SEPTIC DRAWINGS
• SEPTIC DRAINFIELD RESTORERS

Suggested citation for this web page

DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE INSPECTION DATE IN

INDEX to RELATED ARTICLES:ARTICLE INDEX to SEPTIC SYSTEMS

Alternatives include asking a question or searching InspectApedia using the SEARCH BOXfound below.

Ask a Question or Search InspectApedia

Questions, answers, and/or comments concerning issues relating to the functioning of aerobic septic systems are welcome. We encourage you to use the search box just below, or if you prefer, you may make a question or remark in theCommentsbox below and we will get back to you as soon as possible. InspectApedia is a website that allows you to search for things.

Please keep in mind that the publication of your remark below may be delayed if it contains an image, a web link, or text that seems to the program to be a web link. Your submission will appear when it has been reviewed by a moderator. We sincerely apologize for the inconvenience.

Technical ReviewersReferences

Citations can be shown or hidden by selecting Show or Hide Citations. InspectApedia.com is a publisher that provides references. Daniel Friedman is an American journalist and author.

How to Locate a Septic Tank Drain Field

Home-Diy A septic system is a type of sewage system that is used to remove wastewater from properties that do not have access to public sewage systems. if (sources.length) then this.parentNode.removeChild(sources); then this.onerror = null; this.src = fallback; )(, arguments.target.currentSrc.replace; )(, arguments.target.currentSrc.replace; )(, arguments.target.currentSrc.replace; (//$/, “), (//$/, “), ‘/public/images/logo-fallback.png’) is a fallback logo image. ” loading=”lazy”> ” loading=”lazy”> After passing through the septic tank, water is discharged onto the drain field.

A drain field is made up of a series of perforated pipes that channel the wastewater into the ground and into a drainage system (also known as a leach field).

1. To find out if your local municipality has the records from the installation of your septic system, you should contact them. This can provide you with accurate information on the location of the drain field. Look for tubes or pipes in your yard that have white caps on the ends of the tubes or pipes. The caps, which are referred to as monitoring ports, allow you to check the amount of liquid in the drain pipes. The caps are positioned at the end of the drain field
2. They are made of concrete. Take a look at the surface of your lawn to see if there are any locations where the earth has been flattened in parallel rows. This can be used to identify the drain field. Check your yard for indicators of a drain field to see if there is one. During the winter, seek for spots where the frost melts the most quickly to save time. When your lawn begins to turn brown in the summer due to the heat and lack of water, check for green stripes in the grass. The grass is lush and green in these regions as a result of the moisture provided by pipes in the drain field. Engage the services of a competent organization to find the drain field
3. And

The Drip Cap

• A septic system is a sort of sewage system that is used to remove wastewater from properties that do not have access to municipal sewage systems. The caps, which are referred to as monitoring ports, allow you to check the amount of liquid in the drain pipes. Find green stripes in the lawn throughout the summer, when your grass begins to turn brown due to the heat and lack of water
• They are signs of healthy grass. The grass is lush and green in these regions as a result of the moisture provided by pipes in the drain field.

How to Locate Your Septic Tank Field Lines

Your septic tank field lines are undoubtedly present, but where exactly can you find them? They are less difficult to get by than you may assume. In this post, we’ll go through what to look for in order to figure out where to seek for them. After reading this, the vast majority of people should be able to locate their system without the aid of a specialist.

Why Does it Matter?

Getting into problems with the law is easy if you’re conducting household chores and accidently damage your field lines. It is worthwhile to find your field lines if you want to save money and time in the long run. The following types of work can harm your lines: any form of paving, driving and parking heavy equipment, planting shrubs or trees, and landscaping are just a few examples. Even the smallest omission can result in financial losses of hundreds or thousands of dollars.

Who Should Look for the Lines?

Locating the field lines for your septic tank is a very simple procedure. There is no unique training or skill set necessary for this position. In other circumstances, it may be impossible to locate the lines on your own, and you may need to seek expert assistance. In the majority of circumstances, anybody may search for the lines. You, too, can succeed with a little assistance from this essay. More information may be found at:

• How to Select and Use the Most Effective Septic Tank Treatment (Top 3 Reviews)
• 5 Different Types of Residential Septic Systems (and the Advantages and Disadvantages of Each) Home Remedies for a Clogged Septic Tank (Also Including Maintenance Suggestions)

How to Locate Your Septic Tank Field Lines

Here is a list of strategies and procedures you may use to locate the lines that drain into your septic tank’s drain field.

Find the Drawings

Reaching out to your local health agency is the most reliable means of locating your septic tankfield lines. It is their policy to keep a dossier on every septic system that has been installed with a permit. Of course, if your system was not constructed with a permit, you will not be successful in this endeavor. It will be possible to see the layout, position, and every aspect of your drain field thanks to the drawings. Typically, they will mail you the drawings that you have requested.

You can also get in touch with the contractor who did the septic system installation or the former owner of the house for further information. When looking for electrical components for your system, you might be able to obtain them at the building department office in your location.

The Grass is Much Greener…

It is expected that your drain field would absorb up nutrients and water from the surrounding soil. In other words, your drain field will be a lot greener and healthier piece of grass than the rest of the surrounding landscape. The type of cues you use to locate your drain field will be determined by your climate.

Cold Climates

If you live in a frigid region, wait until the morning when it is snowing or ice. It’s possible that your drain field will be the first to melt.

Warmer Climates

Because of the warmer environment, it is easy to locate the drain field. For a few days, refrain from watering your yard. With the exception of your drain field, you’ll observe that the majority of the grass begins to wither.

Check for Ports

A large number of septic systems are equipped with monitoring ports and clean-outs. These ports will be white tubes or pipes with a cap on them that will protrude from the ground in your yard. These apertures allow the homeowner to monitor the amount of water in the drain field without having to dig up the drain field. For you, it serves as an indication of the exact location of your drain field! Because these ports are often cut quite near to the ground, it may take some research to locate them.

These ports will direct you to the correct location.

Check Google Maps

You might be able to locate your septic tank field lines using satellites if you live in certain areas. Consider the following example: when we look at our home from a satellite view on Google Maps, we can clearly see where our drain field is located. Parallel lines, darker grass, and small depressions are all things you could notice. Using this zoomed-out, bird’s eye perspective, you will be able to inspect the area for anomalies.

Consult a Professional

The use of satellites may be able to help you locate your septic tank field lines for certain folks. Consider the following example: when we look at our house from a satellite view on Google Maps, we can clearly see where our drain field is located. Parallel lines, darker grass, and tiny depressions are all things you should look for in this area. You will be able to see any anomalies with this zoomed-out, bird’s-eye perspective.

Check the Distribution Box

Distribution boxes are the parts of the system that come before the drainage lines. That is to say, if you can locate the distribution box, you will be one step closer to locating your field line connections. Begin your search a few feet downstream from where your septic tank is located (assuming you know where that is). Remove a lid if you find one that can be removed. It is through this cover that you may have access to the ports and pipes of the distribution box. This implies that simply lifting the lid, you will be able to see your drain lines in their actual form.

Use Your Septic Tank

Knowing where your septic tank is, you can use a little intuition to locate your drain field if you know where it is. Our post on how to locate your septic tank can be found by clicking here. The most crucial thing to remember about your output port is that it is parallel to your intake port.

The output port will, to a greater or lesser extent, orient you in the direction of your field line. At the very least, it will assist you in locating your distribution box, which will direct you to the field lines.

Check for Moisture

In general, your drain field should be swampier and wetter than the grass in the immediate vicinity. It will be a bit easier for you to look around as a result of this. If your lawn’s color is consistent and it’s difficult to distinguish between different areas, it’s time to bring in the heavy guns! Wait until a very challenging day before grabbing a stick or rod. Now, walk around your yard, poking your grass in various locations as you go. Where the earth yields more and is more moist is what you’re searching for.

Caution should be exercised when poking, since this might result in damage to your lines.

Understand the Size of Your Field

The size of your drain field will be determined by the amount of water you use and the size of your property. When you’re searching for anything, it’s frequently beneficial to keep in mind how broad your field is. It’s possible that huge area of green grass in the distance is your drain field.

You Might Also Like…

It’s not always simple to find your septic system’s drainfield, but there are three things you can do to make the work a little bit easier.

1. Take a look around your yard. In spite of the fact that it is usual for there to be no indicators of the drainfield’s presence, search for lines of green grass, dead grass, or depressed regions. These might be indicators of the location of your drainfield. Check with the permitting authorities (typically the county), the installer, or the designer to see if they have any septic records. A word of caution: septic system designs are not usually correct. Probe your yard and feel for gravel. Because your drainfield’s pipes are buried in gravel, it aids in the wastewater treatment process
2. Therefore, locating gravel may indicate that you have located your drainfield. Be warned that in locations where the native soil is hard or rocky to probe into, this may be difficult to do.

Why do I need to know where my drainfield is?

However, while we tend to focus on the tank portion of a septic system, it is actually the drainfield that is the most significant component – it is here that the majority of the treatment takes place. If you don’t know where your drainfield is, you won’t be able to textend the life of your drainfield. If you do any of the following, you risk damaging the lines by accident:

• Drove over them — Driving a car or heavy equipment over the lines has the potential to destroy them. Build over them — House extensions, sheds, pools, driveways, and other structures can cause damage to underground utility wires, making it more difficult to reach them for repairs. Plantings in the vicinity of or above them –Trees and septic systems are not a good combination. Roots that have invaded the line might cause harm.

Interested in learning more about how your septic system works and what you can do to maintain it in good working order? Discover how to understand and maintain your septic system with our free guide, Understanding and Maintaining Your Septic System. For more than 80 years, Van Delden Wastewater Systems has stood the test of time as the leading Wastewater System company, providing San Antonio, Boerne, and the surrounding Texas Hill Country with services you can depend on now and in the future.

How To Find Septic Tank Location: A Guide for Property Owners

The majority of individuals prefer to relax on their back patio or porch and take in the scenery rather than worrying about where their septic tank could be. When you know exactly where your septic tank is, it will be much easier to schedule routine sewer line cleanouts and repair appointments. Continue reading to find out more about how to locate your septic tank.

Follow the Main Sewer Line

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your property. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about down there. Look for a pipe with a diameter of around four inches that is leading away from your home or building. Keep a note of the position of the sewer pipe and the point at which the line exits your home so that you can locate it outdoors.

If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your home.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may have to probe a bit further out before striking the tank.

Inspect Your Property

Purchase a soil probe that you may use to probe into the earth in order to locate the underground sewage line and septic tank in your yard. Find the main sewage line that leads to your septic tank by going to your basement or crawl space and digging about in it. Look for a pipe with a diameter of around four inches that is leading away from your home or business. Recall where your sewer pipe is located, as well as where it exits your home, in order to locate it while you are out in the field.

If you have a drain snake, you may use it to try to follow the approximate course of the pipes in your house.

Since the majority of states require at least five feet between a home’s septic tank and its foundation, with many tanks located between 10 and 25 feet away, you may need to probe a bit further out before striking the tank.

• Paved surfaces
• Unique landscaping
• Your water well, if you have one
• And other features.

If you are still having trouble locating your septic system, you might inquire of your neighbors about the location of their septic tank on their land. Finding out how far away their septic systems are will help you figure out where yours might be hidden in your yard or garden.

Check the Property Records

Are you unsure about how to obtain this? Simply contact your county’s health department for further information. Check with your local health agency to see if they have a property survey map and a septic tank map that you can borrow. Perhaps you will be shocked to learn that there are a variety of options to obtain information about your property without ever leaving the comfort of your own residence. Building permits, for example, are frequently found in county records, and they may provide schematics with specifications on how far away from a septic tank a home should be, as well as other important information such as the size of the tank.

Most counties, on the other hand, keep records of septic tank installations for every address.

Don’t Try to Fix Septic Tank Issues Yourself

Septic tank problems should be left to the specialists. The Original Plumber can do routine maintenance on your septic tank and examine any problems you may have once you’ve located the tank. It is not recommended to open the septic tank lid since poisonous vapors might cause major health problems. Getting trapped in an open septic tank might result in serious injury or death. While it is beneficial to know where your septic tank is located, it is also beneficial to be aware of the potential health dangers associated with opening the tank.

Schedule Septic Tank Maintenance

The maintenance of your septic tank on a regular basis helps to avoid sewer backups and costly repairs to your sewer system. You should plan to have your septic tank pumped out every three to five years, depending on the size of your tank and the number of people that reside in your home. The Original Plumber offers skilled septic tank and drain field maintenance and repair services at competitive prices. While it is useful to know where the septic tank is located, it is not required. Our team of skilled plumbers is equipped with all of the tools and equipment necessary to locate your tank, even if you have a vast property.

Metropolitan Atlanta and the neighboring areas receive high-quality service from us. We are open seven days a week, twenty-four hours a day. When you require emergency sewer services, we are here to assist you.

Frequently Asked Questions

A septic system is a system for the management of wastewater. Simply said, wastewater will exit your home through pipes until it reaches your septic tank, which is located outside your home. Septic tanks are normally located beneath the surface of the earth. Solids and liquids will separate in the septic tank as a result of the separation process. Eventually, the solids will fall to the bottom of the tank and the liquids will run out onto your leach field.

How do I know if I have a septic tank?

Even if there are no obvious signs of a septic tank in your yard – such as uneven landscaping – there are a few techniques to assess whether or not your home is equipped with an onsite sewage system. Checking your property records is the most reliable technique to ensure that you are utilizing the correct system. When you acquired your house, you should have received a copy of the septic system map with the property documents as well. Checking your electricity statement is another way to determine this.

If you’re also using well water, it’s possible that you won’t receive one at all.

What do I do once I locate my septic tank?

Once you’ve discovered where your septic tank is, there are a few things you should do. It is critical to clearly mark the position of your septic tank. With our inspection, pumping, and repair services, you can save time whether you need a sewer line cleanout or a septic tank maintenance job completed quickly. Make a note of the location of your tank so that you can find it again if necessary. It should be heavy enough so that it does not fly away in windy conditions. A creative approach to accomplish this without having an unattractive flag or marking in your yard is to use garden décor or a potted plant.

This way, you’ll have it for future reference and will be able to quickly locate the exact position if necessary.

Then contact The Original Plumber to have your septic system maintained on a regular basis.

All of the heavy lifting has been delegated to our team of professionals.

Locate Your Drainfield

You know your septic system drainfield is out there� but just where is it? It is important to locate it so you can avoid damaging it by:

• Building a road over the drainfield
• Parking or operating heavy equipment on the drainfield
• Planting trees or bushes in close proximity to a drainfield is prohibited. Creating soil disturbances through a landscaping project or the presence of cattle

In addition, knowing where your drainfield is located allows you to inspect the drainfield for symptoms of trouble, such as damp soil and foul aromas. You should obtain a copy of the record sketch for your particular system. It is a diagram that shows where the various components of your septic system are placed. This diagram was previously referred to as a “as-built” or “record drawing.” You can obtain more information by contacting the Thurston County Permit Assistance Center (PAC) at 360-786-5490 or by downloading the Request for Record Drawing/Permit Information form.

SW in Olympia, Washington (PAC Hoursof Operation-LimitedHours Please Check Before You Leave).

This is the tax identification number that appears on your county tax bills.

(If you do not know your tax parcel number, contact the County Assessor’s office.) The level of detail and quality of the record drawings varies substantially.

a more recent diagram will indicate the tank, drainfield, replacement area (which will be used in the future if a replacement field is required), and any additional components of your system, such as a pump chamber or mound It is also possible to record the dimensions of the tank and the length of the drainfield lines.

If there is no copy of your record drawing accessible, you might use the following suggestions to find the drainfield.

• If you don’t water your grass in the late summer, you may notice green stripes in your yard as a result. These are the regions that are prone to flooding along the drainfield pipes. When it is cold outside, the regions above your pipes may be the first spots where frost melts in your yard. Do you have any ports for monitoring or clean-outs? These are tubes or pipes with a white cap that are cut off at or near the ground level. Drainfield pipes include liquid level indicators that are situated at the ends of the pipes, which allow you to monitor the amount of liquid in the pipes. Examine the regions leading away from the septic tank with great caution. Avoid the use of heavy steel wrecking bars or other probing equipment that might cause damage to the septic tank top or other components of the system. Take note of any signs you see, such as shallow, parallel depressions that may indicate drainfield trenches. The installation of a drainfield among huge trees or in particularly rough terrain is quite unlikely. Examine the area beneath the home where the sewer line emerges from the foundation. The septic tank is typically located within 10 feet of the foundation
• However, this might vary. Engage the services of a competent business to send down echo-locators

For more information on troubleshooting problems,contact the Septic Help Line at 360-867-2669.

How To Find My Septic Tank

1. What is a septic tank and how does it work? What Is the Best Way to Determine if I Have a Septic Tank
2. Identifying the location of your septic tank is critical for several reasons. The Best Way to Find a Septic Tank
3. What to Do Once You’ve Discovered Your Septic Tank

What is a septic tank and why do you need one? Identifying a Septic Tank; How Do I Determine If I Have a Septic Tank; In this article, we will discuss why it is important to know where your septic tank is. The Best Way to Find a Septic Tank Following the discovery of your septic tank, what should you do?

How to Locate Your Septic Tank

Your septic tank’s location is not a closely guarded secret. There will be a method for you to locate it and make a note of its position for future reference, and below are a few examples of such methods.

What Is a Septic Tank?

Nobody has any idea where your septic tank is located. For your convenience, we’ve included a list of some of the methods you may use to locate it and record its position for future reference.

How Do I Know If I Have a Septic Tank?

What is the best way to tell if your home has a septic tank? There are generally a few of different methods to tell. Examining your water bill might help you identify whether or not your house is served by a septic system or is part of the public sewage system in your neighborhood. If you have a septic system for wastewater management, you are likely to receive a charge from the utility provider for wastewater or sewer services of zero dollars. In the case of those who are fortunate enough to have a septic system, it is likely that they may not receive any water bills at all.

1. A lack of a meter on the water line that enters your property is typically indicative of the fact that you are utilizing well water rather than public utility water, according to the National Association of Realtors.
2. A septic system is likely to be installed in your home if you reside in a rather rural location.
3. Septic systems are likely to be installed in all of these buildings, which means your home is likely to be as well.
4. When a septic tank is present, it is common to find a mound or tiny hill on the property that is not a natural structure.
5. Checking your property records is a foolproof method of determining whether or not your home is equipped with a septic system.

Why It’s Important to Know the Location of Your Septic Tank

You might wonder why you should bother trying to discover out where your septic tank is. There are several important reasons for this:

1. To Be Able to Care for It Properly

The first reason you should try to locate your septic tank is that knowing where it is will help you to properly repair and care for it in the future. The standard recommendation is to avoid erecting structures or placing heavy objects on top of the septic tank.

It’s possible that you don’t want to park your car or truck on top of it, and you don’t want visitors to your house to park their cars on top of it, either. Due to the weight of the automobiles, there is a possibility that the tank would collapse due to excessive pressure.

2. If You Want to Landscape or Remodel Your Property

If you want to build an addition to your home or perform some landscaping around your property, you will need to know where your septic tank is located. Nothing with deep or lengthy roots should be planted on top of or in the area of your tank, since this can cause problems. If roots are allowed to grow into the pipes of your septic system, it is conceivable that your system will get clogged. When you know where the tank is going to be, you may arrange your landscaping such that only shallow-rooted plants, such as grass, are in close proximity to the tank.

For starters, the tank’s weight might lead it to collapse due to the weight of the construction.

3. If a Problem With Your Tank Occurs

If you intend to build an addition to your home or perform some landscaping around your property, you must first determine the position of your septic tank. On top of, or in the area of, your tank, you should avoid planting anything with deep or lengthy roots. If roots are allowed to grow into the pipes of your septic system, it is conceivable that the system will get clogged. You may arrange your landscaping such that only shallow-rooted plants, such as grass, are in close proximity to the tank once you know where it is.

For starters, the tank’s weight might cause it to collapse due to the weight of the surrounding building.

4. Ease of Getting It Fixed

Once you have determined the location of your sewer system, you can quickly send a plumber to it in the event that something goes wrong with the system, saving everyone both time and money. Get in Touch With A Plumber Right Away

1. Use a Septic Tank Map

First and foremost, make use of a road map. Using a map is frequently the quickest and most convenient alternative. Most counties keep records of the installation of septic tanks at all of their residents’ residences. These maps should include schematics that illustrate the specific placement of the tank on the land, as well as measurements that allow you to measure and locate the tank’s exact location on the property. Never mind that landmarks may shift over time depending on when the tank was built, so if there are a few more shrubs or a tree nearby, don’t rule out that location as a possibility.

• If you are unable to locate a map or other paperwork that identifies the location of your septic tank, there are a few locations to try to see if you can obtain a map of the area.
• The county health department is responsible for keeping track of septic systems.
• A septic tank’s position could be depicted on a survey map, for example.
• The creation of your own map and documentation may be worthwhile if you cannot locate a map or blueprint of your property and nothing appears to be on file regarding it at the county health department or another municipal agency.

In this way, if you ever decide to sell your property, you will be able to supply the new owner with everything they will need to locate the tank and properly manage their septic system.

2. Follow the Pipes to Find Your Septic Tank

Whether or not there is an existing map of your septic tank on file, or whether or not you choose to develop one for future reference or for future homeowners, you will still need to track down and find the tank. One method of accomplishing this is to follow the sewer lines that lead away from your residence. The septic tank is situated along the sewage line that goes from your home and into the yard, as we’re sure you’re aware. Find a four-inch sewer pipe in your basement or crawl space. This is the line that will lead to your septic system and should be accessible from the ground level.

1. In general, though, you’re searching for a pipe with a diameter of four inches or more that leaves your home via a basement wall or ceiling.
2. By inserting a thin metal probe (also known as a soil probe) into the earth near the sewage line, you can track the pipe’s location.
3. The majority of septic tanks are located between 10 and 25 feet away from your home, and they cannot be any closer than five feet.
4. Going via the sewage line itself is another method of locating the septic tank utilizing it.
5. Drain snakes are typically used to unclog clogs in toilets and drains, and they may be used to do the same thing.
6. When the snake comes to a complete halt, it has almost certainly reached the tank.
7. While drawing the snake back, make a note of how far it has been extended and whether it has made any bends or turns.
8. When looking for your septic tank, you may use a transmitter that you flush down the toilet and it will direct you straight to the tank.

3. Inspect Your Yard

Septic tanks are designed to be as unobtrusive as possible when they are erected. With the passage of time, and the growth of the grass, it might be difficult to discern the visual indications that indicated the exact location of your septic tank’s installation.

However, this does not rule out the possibility of finding evidence that will take you to the location of your septic tank in the future. First and foremost, you want to rule out any potential locations for your septic tank, such as:

• Under a road or similar paved surface, for example. Right up against the house (the tank must be at least five feet away)
• Directly in front of the home Immediately adjacent to your well (if you have one)
• In close proximity to trees or densely planted regions
• In the shadow of a patio, deck, or other building

Once you’ve ruled out any potential locations for your tank, it’s time to start hunting for indications as to where it may be hiding in plain sight. Keep your eyes peeled as you go about your property, looking for any inexplicable high or low points that might suggest the presence of an underground tank. When looking at your property, you could see a hill or mound on the ground, which is frequently an indication that there is a septic tank nearby. One further item to consider while searching for the right septic tank for your home is the amount of grass or other foliage in your yard.

Alternatively, if the tank was not adequately buried, you may observe a “bald patch,” which is an area where the grass is struggling to grow in the vicinity.

4. Talk to Your Neighbors

If your neighbors have septic systems as well, they may be able to assist you in locating your tank. Inquire of your neighbors about the location of their septic tanks in relation to their residences. Having a polite conversation with your neighbors regarding septic systems not only provides you with a means to figure out where yours is, but it may also serve as a friendly introduction to the other residents of your community.

5. Look for Your Septic Tank Lid

It is only the first step in the process to discover where your septic tank is located. After you’ve located your tank, the following step is to locate the lid. You can locate it with the help of your soil probe. The majority of septic tanks are rectangular in shape and measure around five feet by eight feet. The perimeter of the tank should be marked with a probe once it has been probed around. A shallow excavation with a shovel within the tank’s perimeter and near the center (or broken into halves for a two compartment tank) should show the position of the lid or lids if you are unable to feel them by probing.

The tank itself is likely to be filled with foul-smelling vapors, if not potentially hazardous ones.

What to Do After You Find Your Septic Tank

Once you’ve determined where your tank is, it’s time to bring in the specialists. Trust us when we say that opening a septic tank is not something that just anybody wants to undertake. Concrete septic tank lids are extremely heavy and must be lifted using special lifting gear in order to be removed. Since the vapors are potentially dangerous due to the contents of the tank, please respect our advice and refrain from attempting to open the tank yourself. An exposed septic tank can be hazardous to anybody wandering around your property’s perimeter, and if someone were to fall into it, it might be lethal owing to the toxicity of the sewage in the tank.

However, before you send in a team of experienced plumbers, there are a few things you can do to ensure that others do not experience the same difficulty locating the tank and to make locating the tank in the future easier.

1. Mark Its Location

The likelihood is that you will not want to post a large sign in your yard that reads “Septic Tank Here!” but you will want to leave some sort of marking so that you can quickly locate the tank and lid when you need them. In an ideal situation, the marker will be substantial enough that it will not blow away in the wind and will not be readily moved by children who are playing in the yard. A patio paver, a potted plant, or a decorative gnome or rock are just a few of the possibilities. In addition to putting a physical sign beside the septic tank, you may draw a map or layout of the area around it to illustrate its position.

2. Take Care of Your Septic Tank

Taking proper care of your tank may save you hundreds of dollars over the course of its lifetime. The expense of maintaining your system could be a few hundred dollars every few years, but that’s a lot less than the thousands of dollars it might cost to repair or replace a damaged tank or a malfunctioning septic system. Two strategies to take better care of your septic tank and system are to avoid utilizing your drain pipes or toilets as garbage cans and to use less water overall. Things like paper towels, face wipes, and cat litter should not be flushed down the toilet since they are not designed to be flushed.

In addition, installing low-flow faucets and high-efficiency toilets can help you reduce the amount of water used in your home.

For example, you don’t want to be washing load after load of laundry or running your clothes washer at the same time as your dishwasher all at the same time.

Call a Professional Plumber

Maintenance of a septic system is not normally considered a do-it-yourself activity. In the Greater Syracuse region, whether your septic tank requires pumping out or cleaning, or if you want to replace your tank, you should use the services of a reputable plumbing firm to do the job right. If you’ve attempted to locate your septic tank on your own and are still unsure of its position, it may be necessary to enlist the assistance of a professional local plumber. Our team at Mr. Rooter Plumbing of Greater Syracuse can assist you with locating, maintaining, or replacing your home’s sewage tank.

Request an Estimate for the Job