- First, use your probe to mark out the edges of the tank. Grab a shovel and start digging in the spot where the diagram says the lid is. In most cases, septic tank components including the lid, are buried between 4 inches and 4 feet underground.
Should septic tank lids be buried?
In most cases, all components of the septic tank including the lid are buried between 4 inches and 4 feet underground. Unless the septic tank has special risers that position the lid at ground level, you’ll have to dig for it.
How deep are septic tank lids?
Often, septic tank lids are at ground level. In most cases, they have buried anywhere from four inches to four feet underground.
Do septic lids need to be sealed?
Like wells, septic systems have problems if they are not sealed from outside surface water. Most septic systems rely on buried pipes to get rid of the fluids. The lid covers should fit tightly — if they don’t, a company that specializes in septic repairs should be called to fix them.
What size are septic tank lids?
Available in 12″, 16″, 20″ and 24″ diameters. Green only. 12″ Tall Riser – For septic tanks.
Do all septic tanks have filters?
First, not all septic tanks have a filter, especially the older septic tanks. Now many government agencies require or recommend a filter when a septic tank is installed. Cleaning a septic tank filter is different than pumping out a septic tank and cleaning it.
Do you need to pump both sides of a septic tank?
Septic tanks installed after the late 1980s have two compartments, and it is important to pump out both compartments each time. Most homeowners are unaware when their septic tank has two compartments; some companies use that to their advantage, charging to pump both sides of the tank but only actually pumping out one.
How deep are drain fields buried?
A typical drainfield trench is 18 to 30 inches in depth, with a maximum soil cover over the disposal field of 36 inches.
Do septic tanks need to be airtight?
Septic tanks need to be watertight. The riser should be sealed to the top of the tank and the riser cover should be sealed to the riser with butyl rubber or some other flexible sealant. No liquid should enter or leave the tank.
What causes a septic tank to collapse?
Once a tank is emptied of water, it is much more prone to collapse. That is because the pressure of the surrounding soil is no longer counter-acted by the water inside the tank. Regular maintenance and proper user behaviors will keep your septic tank working properly for years without major issues.
Dig the Correct Cover
Here are a few pointers to assist you in locating and digging the proper cover for your septic tank:
- Locate the 4′′ sewage pipe that runs from your toilet and shower to the exterior wall of your home. It should be visible. Most of the time, your tank is 8 to 15 feet from the place where the sewer pipe exits
- Perhaps you have seen an area outdoors where snow melts each winter
- Most of the time, this location is within the 8 to 15-foot range. This is an excellent place to begin. To identify the four corners of the tank, probe the ground with an abar and mark the locations. A septic tank measures roughly 8 feet long by 5 feet broad and is covered with three different types of coverings. Some tanks, on the other hand, are longer and made of plastic, making them more difficult to spot. Our company, Maine SepticPumping, requests that you find and excavate the center cover in order for us to thoroughly clean and remove any sediments from your tank. If you have a septic system that includes a pump, you should exercise caution. Unground electrical wire will be present, and it is possible that it could pose a hazard. You should also find and dig the cover for your pump chamber so that it can be pumped at the time of our service
- If you are experiencing sluggish drains and the digging is relatively simple, you can try excavating all of the tank covers. All of the covers being removed would allow us to inspect your input region and eliminate any sediments that may be blocking the passage of the water. This also allows us to view your outlet baffle clearly, allowing us to ensure that it is secure. If you have any questions when trying to locate your tank, please contact our office. MaineSepticPumping can also assist you in locating and digging your cover.
How to Find the Lid on a Septic System
All septic tanks eventually fill with sediments and must be pumped out on a regular basis in order to remain in excellent functioning order. If the tank’s lid is not on a riser at ground level and you are not the home’s original owner, you may be unable to determine where the lid is located. A typical septic tank is 4 inches to 4 feet underground, with all of its components, including the cover, buried between 4 inches and 4 feet underneath. This is true regardless of whether the septic tank is equipped with special risers that keep the lid flush with the surface of the ground.
Consult A Map
First, choose with the most straightforward choice. The installation of septic tanks at all locations is recorded in most counties’ permission records, which are kept on file for future reference. Typically, this will include a schematic indicating the placement of the tank on the land, as well as certain dimensions that will allow you to measure to the precise site of the tank. If your tank was placed before your county made it a requirement to record the location of such tanks, you may find yourself with nothing to show for your efforts.
Search For A Sign
Initial consideration should be given to the most straightforward choice. The installation of septic tanks at all locations is documented in most counties’ permission records. Typically, this will include a schematic indicating the placement of the tank on the land, as well as certain dimensions that will allow you to measure to the precise site of the tank. If your tank was placed before your county made it a requirement to record the location of such tanks, you may find yourself with nothing to show for your effort.
Follow The Pipe
Installation of the septic tank takes place along the sewage line that runs from the house into the front yard. Locate the 4-inch sewage pipe at the point where it exits the home in the basement or crawl space, if it is there. Locate the same spot outside and make a note of it. Insert a thin metal probe into the earth, identify the 4-inch sewage line, and follow it across the yard, probing every 2 feet, until you reach the end of the property. Septic tanks are required to be at least 5 feet apart from the home in all states except Alaska.
Whenever the probe makes contact with flat concrete, fiberglass, or polyethylene it indicates that the tank has been located.
Locate The Lid
The majority of septic tanks are rectangular in shape and measure around 5 feet by 8 feet. Investigate the tank’s circumference to determine its boundaries and outline the rectangle’s boundary using a pencil. A septic tank that was built before 1975 will have a single concrete lid that is 24 inches in diameter in the center of the rectangle. If the tank was built after 1975, it will have two covers made of fiberglass or polyethylene, centered at the ends of the rectangle and centered at the ends of the rectangle.
It should be possible to uncover the lid or lids by digging with a spade in specific spots, depending on when year the tank was constructed.
Call A Professional
Opening a septic tank is a job best left to the pros once the lid has been discovered. Concrete septic tank lids are extremely heavy, and many require the use of lifting tools to remove them completely. An open tank has the potential to release toxic gases. Anyone going around on the property who comes into contact with an exposed septic tank might be in risk. Because of the noxious vapors present in an open tank, falling into one can be lethal.
Mark The Spot
Make a note on the ground near where the tank was pumped by a professional and the lid was buried to serve as a reference in the future. In order to keep track of where you are, you should choose a hefty circular patio tile that is embedded in the ground. Additionally, draw your own map of the area and store it with your other important papers.
Tired of Digging Up Your Septic Tank Lid? Install a Riser. – Advanced Septic Services Inc
- Home
- Blog
- Are you tired of digging up your septic tank lid every time it rains? Install a stair riser.
December292017InBlog Depending on where they are located in the ground, septic tanks can be anywhere from a few inches to several feet below the surface of the earth, necessitating the excavation of the septic tank lid every time it has to be repaired. Hand digging can be tiresome and back-breaking job, and it is something that many people prefer to avoid at all costs. The avoidance of digging frequently results in a septic system that has been neglected, and in severe cases, has failed. Many homeowners are not aware of the potential improvements that may be done to their septic tank in order to avoid the need to excavate entirely from their property.
- What exactly is a riser?
- In many circumstances, the installation is rapid, simple, and reasonably priced.
- We usually replace the old concrete lid with a green, plastic cover that is affixed to the riser pipe itself, rather than the riser pipe itself.
- A septic tank preventer may save you time, effort, and money in the long run.
- Make contact with our staff at Advanced Septic Services by calling (717) 789 – 4548 or using our online form to schedule your riser installation.
- All intellectual property rights are retained.
How to Find a Septic Tank and Manhole Cover
People frequently contact me through e-mail to inquire where they can find the septic tank cover for a septic tank, the manhole, or how to locate a septic tank in its natural state.
Which is invariably met with the response “I don’t know.” Our plumbing how to will demonstrate that septic tanks and covers are never found in the same location, making it difficult for even the most experienced homeowners to make their way to the septic tank lid.
Check your building plans they often show you how to locate a septic tank.
It might be difficult to locate an aseptic tank, distribution box, or septic covers. The first thing you should do is double-check your original construction blueprints. Because these construction plans will frequently show you the exact placement of the septic tank or manhole covers for septic tanks, it is important that you keep them on hand. If you do not have your building plans, check with your local office of zoning to see if they already have a copy of your plan. Even if the septic system is still relatively new, there is a strong possibility they will, although many states do not save any of the earlier documentation.
It’s also possible to locate whichseptic tank service installed the system, and that company should be able to tell you exactly where the septic tank and/or septic tank lid are located.
How to find out where a sewer main exits the house.
The location of a septic tank, distribution box, or septic covers might be difficult to determine in some cases. The first thing you should do is double-check your original construction documents. If you do not have your building plans, check with your local office of zoning to see if they have your plan on file. If you do not have your building plans, check with your local office of zoning to see if they have your plan on file. While it is likely that they will if the septic system is still relatively young, several states do not save any older information.
It’s also possible to locate whichseptic tank service installed the system, and that company should be able to tell you exactly where the septic tank and/or septic tank lid is located.
Use a tile probe to find the pipes leading to the septic tank.
Having located your sewage main and having a general notion of where the sewer pipe exits the home, you will need to step outside and probe the ground directly next to your foundation with a tile probe or a 12-inch or 14-inch stainless steel rod until you locate the sewer pipe. However, if you push too hard, you may wind up poking a hole in the drainpipe, which is particularly dangerous if the drainpipe is an older type of cast iron pipe. Once you’ve located the main line, you’ll want to go on to the next step: locating the septic tank.
The majority of septic tank systems are located between ten and twenty feet away from your property.
Septic tanks and septic tank lids are two types of septic tanks.
The manhole cover for the septic tank may be found here. can be located in the exact center of the septic tank, a septic tank lid can also be located on the side of the septic tank inlet or outlet, there can even be two or three septic tank covers, or there can be none at all.
How to locate a distribution box.
At the very least, it should be a little easier to locate the distribution box. It is normally around ten to twenty feet away from the septic tank, and you can sometimes tell it is there just by looking at the way your grass grows in the spring and summer. A common occurrence is that the grass will be greener above the drain lines, and you will be able to observe a pattern on the lawn where the lines meet together, which indicates the location of your distribution box. Other than that, you’ll have to place the distribution box in the same manner as you did with the septic tank.
Some of the things you can find while locating your septic tank are:
- At the very least, it should be a little easier to locate the distribution box in this situation. In most cases, it is between ten and twenty feet away from the septic tank, and you can sometimes tell where it is by looking at the way your grass grows. There will often be more growth over the drain lines, and if there is a pattern on your lawn where the lines meet together, that is where your distribution box will be located. Other than that, you’ll have to position the distribution box in the same manner that you did with the sewage treatment plant. Recall that discovering an aseptic tank, septic tank lid, or adsorption box is rarely an easy task
- In fact, it is sometimes quite difficult.
At the very least, finding the distribution box should be a little less difficult. In most cases, it is between ten and twenty feet away from the septic tank, and you can sometimes tell where it is merely by looking at how your grass grows. A common occurrence is that the grass will be greener above the drain lines, and you will be able to observe a pattern on the lawn where the lines meet together, which will indicate the location of your distribution box. If this is not the case, you will need to find the distribution box in the same manner as we did with the septic tank.
External References
- Using the Internet, you may learn how to locate your septic tank (inspectapedia.com), how to locate your septic tank (septicdesign.com), and more.
How to find your Septic Tank Cover in 3 Steps
Home-Diy When dealing with something as enormous as a septic tank, it should be simple to keep track of things, but in reality, the reverse is frequently true. If your bird has been resting in your yard for several years without being disturbed, the dirt above it has settled and the ground cover successfully camouflages it, making identifying one a bit of detective work. When the length of the sources is equal to zero, this.parentNode.removeChild(sources); otherwise, this.onerror = null; this.src = fallback; )(, arguments.target.currentSrc.replace(), ‘, /public/images/logo-fallback.png’) ” loading=”lazy”> ” loading=”lazy”> It might be difficult to locate a septic tank, regardless of its size.
You should, however, be able to complete the task without exhausting yourself with a shovel if you follow the process of logical inference and use two useful instruments.
- Design a floor plan for your property
- Metal detector, shovel and a 6-foot piece of rebar are all necessary tools for this job.
Tip
It is common for septic tanks to have two lids, one for cleaning the tank and another for repairing and maintaining the pump. If you don’t find the one you’re looking for, use the metal detector to locate the other one you’re looking for. If you are unable to locate a site plan, locate the sewer clean out and excavate to determine which way the sewage flows. Starting in that direction, begin probing with the re-bar until you come upon the tank.
Warning
Septic tanks are frequently equipped with two covers: one for cleaning the tank and another for repairing the pump.eptic tank with two covers You may use the metal detector to look for the other one if you can’t find the one you’re looking for.
You can excavate to find out which way the sewer clean out is running if you can’t discover a site map. Starting in that route, begin probing with the re-bar until you come upon a tank.
- Consult a site plan for your property that indicates where the tank will be located before installing it. If you don’t have one on hand, you may check it up in the records of the county building department, where the contractor who installed it was obligated to submit a copy of the certificate. Take note of the relative orientations of the tank and your house, as well as the distance between the tank and the side of your house where the sewer leaves. The sewage clean-out on the side of your property should be located and measured in the direction that it is intended to flow into the tank. Start probing for the tank at that point by pushing a 6-foot piece of re-bar into the earth with a sledge hammer to determine its location. Immediately after hitting an impediment, stop hammering and start excavating a foot or two farther down the road. a) Continue doing this until you can drive the re-bar even farther into the tank, which indicates that you have reached the end of the tank. In this manner, locate and mark the ends of the tank on both sides. To locate the cover, run a metal detector over the area you marked out with a marker. It is often made of metal, or at the very least contains metal components. In addition, if the tank is equipped with an effluent pump, which is always positioned beneath the lid, the metal detector will detect this as well. Starting at the location where you receive a favourable reading, begin digging.
The Drip Cap
- Make a note of the position of the tank on your property’s site plan, which should be accessible online. If you don’t have one on hand, you may search it up in the records of the county building department, where the contractor who installed it was obligated to submit a copy of the paperwork. Be sure to take note of the relative orientations of the tank and your house, as well as their distances from the side of your house from which the sewer empties. The sewer clean-out on the side of your house should be located and measured in the direction that your tank should be located. Using a sledge hammer, drive in a 6-foot piece of re-bar into the ground to test the earth for the presence of the tank. Immediately after hitting an obstruction, stop hammering and start excavating a foot or two farther down the road. Make sure you keep driving the re-bar deeper into the tank until you can no longer drive it any farther into it. This method will allow you to locate and mark both ends of the tank. In order to locate the cover, use a metal detector to search the region you designated. Most of the time, it is made of metal, or at the very least contains metal components. The metal detector will also identify the presence of an effluent pump, which is always situated beneath the tank’s lid. When you receive a positive reading, start digging in the area where it is.
How to Locate a Septic Tank
Consult a site plan for your property to determine where the tank will be located. If you don’t have one on hand, you may search it up in the records of the county building department, where the contractor who installed it was obligated to submit it. Be sure to take note of the relative orientations of the tank and your house, as well as their distances from the side of your home from which the sewer leaves. The sewage clean-out on the side of your house should be located and measured in the direction that it is intended to go to the tank.
- Immediately after hitting an impediment, stop hammering and start excavating a foot or two farther down the road.
- Using this method, locate and mark the ends of the tank on both sides.
- It is frequently made of metal, or at the very least contains metal components.
- Start excavating at the location where you received a favorable reading.
1.Follow the Outgoing Sewer Pipe
Look for the four-inch sewage pipe that runs through the structure and the location where it exits the building in the basement or crawl space. Locate the location outside the building where the pipe exits the building or the location of an access cover over the pipe. It is required that septic tanks be at least five feet away from the structure, although they are usually between 10 and 25 feet away. You may follow the pipe all the way to the tank using a metal probe. It is important to note that sewage lines may curve and run around the corner of a building rather than following a straight path to the holding tank.
2.Search for Septic Tank Risers and Lids
Depending on their age, septic tanks are either one- or two-compartment structures. Each compartment has a cover, with two additional lids for dual-compartment tanks that were added later. If the tank includes an access point known as a riser, the lid may be readily visible from outside. Look for round, plastic discs that are about a foot or two in diameter. Due to the fact that the lids might be flush with the ground or just a few inches above it, they can get overrun with grass and other plants over time.
Tanks without risers are likewise equipped with lids, however they are located underground.
3.Find the Drain Field First
In the absence of a riser and lid, search for indicators of a drain field, such as an area of grass that grows more quickly or more slowly than the rest of the yard, grass that is a different color from the rest of the yard, or areas where snow melts more quickly than in other parts of the yard.
Spots of high or low ground in the yard might possibly indicate the presence of a subterranean tank or drain field. You will be able to discover the tank if you probe these regions.
Reasons to Hire a Contractor for Help
Attempting to locate a septic tank on your own can be risky, and in some cases, lethal, if the septic system is old and in danger of collapse. In the event that you fall into a cesspool, dry well, or septic tank, you will die. Removing septic tank lids on your own might potentially put you at risk of contracting bacterial or virus diseases. If you detect any of the following issues, please contact a contractor to assist you in locating or inspecting your septic tank:
- Soil that is sinking around the tank or drain field. Drainage backup into the home’s sewer system, or toilet backup
- A foul odor in the area where you assume the tank and drain field are located
- When there is no rain, pooling water, muddy soil, or spongy grass might occur. Septic tank covers that are rusted, cracked, or have been replaced with improvised lids are prohibited.
Even though you may be ashamed about forgetting where your septic tank is, it is a very frequent problem among homeowners. A contractor may assist you in locating it, and he or she may do it as part of the pumping service. If you need assistance locating your tank or if you have any other questions, please contact us at 503-630-7802. We are available to assist you!
Procedure for Opening Septic Tanks
- ASK a question or make a comment about how to open a septic tank safely and properly for inspection or cleaning.
InspectAPedia does not allow any form of conflict of interest. The sponsors, goods, and services described on this website are not affiliated with us in any way. Instructions on how to open the septic tank. The location of the septic tank cleanout or cover, as well as the access and opening processes. We discuss some of the things to look for before opening the septic tank, such as subsidence, indications of recent work, and septic tank coverings that are not suitable to use. Then we demonstrate how to remove the septic tank lid or the access port cover from the tank.
For this topic, we also have anARTICLE INDEX available, or you may check the top or bottom of the page.
Procedures for Safe Opening of a Septic Tank, Cesspool, or Drywall for Inspection or Cleaning
The following are the contents of the article:
- How to remove the lid from a septic tank
- When it comes to pumping out the septic tank, which septic tank entrance should be used? Why
Instructions on how to remove the lid from a septic tank When pumping out the septic tank, which septic tank entrance should be used? Why;
- How to remove the lid from a septic tank When it comes to pumping out the septic tank, which septic tank entrance should you use? Why
- How to remove a septic tank lid
- Which septic tank entrance should be utilized for draining out the septic tank? Why
Procedure for Opening the Septic Tank Pumping Access Port
It is necessary to clean the septic tank using a cleanout port, which is normally positioned in the center of the tank. A small access opening, such as one over an intake or outlet baffle, does not provide enough space for adequate sludge removal from the septic tank bottom, and it increases the likelihood of future clogging of the tank’s inlet or outlet due to partially removed floating scum that has not been completely removed from the tank bottom. In this particular scenario, we already had the measurements to the exact placement of the septic tank cleanout cover due to previous work.
A wrecking bar is set to be used to remove the cover from the vehicle.
Reader CommentsQ A
@Ron, In order for a concrete septic tank lid to be correctly erected, it must feature both access openings and cast in iron loops to which a hoist may be attached. Alternatively, if your septic tank cover does not have those points of purchase for lifting, you will require a flat bar and a larger wrecking bar to pry up the excavated lid from the septic tank sufficiently to allow you to put a chain around the lid, most likely two Chainz, and lift the lid with a hoist and tripod mechanism or you will use an on-site motorized hoist.
- 1/2 x 27/4 removing the top of a septic tank @Phil, Although what you describe is theoretically doable, it may be less expensive and more rational to do so in a different way.
- This is due to the fact that just stitching a circular hole does not ensure that I am creating a hole through which the lid will not be dropped.
- Edge My concrete septic tank, which was constructed when the home was built in 1979 and does not have any manholes or openings for pumping out, is in poor condition.
- Is it feasible to cut two manholes using a concrete saw that are 20″/24″ in diameter and then build risers and a cover on top of them?
- Could you please share a picture of the tank top?
- It is common for the concrete top to be tapered; nevertheless, it may just be trapped by effloresent salts and filth.
- I have a feeling that simply tugging will not be effective.
This would have stopped leaks but would have made it extremely difficult to open the tank for the next person who needed to open the tank.
Repeat this process many times all around the cover’s perimeter.
For me, this has worked almost every time in the past.
It is recommended that you build a septic tank riser that is sealed to the tank top, as well as a new secure cover on top of the riser if your septic tank lid is not near to the ground level.
Never work on your own.
I’ve erected two wood 4x4s on top of the lifting ring to provide additional support.
All I’ve done three times is shattered those 4x4s.
Do you have any recommendations?
A septic tank pumping provider can remove plastic bags, tiny pebbles, and other debris from your tank, as well as the sediments, scum, and sludge that has accumulated there.
What is the best way to get them out?
When the septic tank is drained out, would it make sense to place a plastic bag over the top hole of the tank to keep the odors contained?
Gerard A plastic bag as a sewer line cap doesn’t seem right to me – it’s not durable, it’s the incorrect material if a cover is required, and if it’s a vent rather than an access pipe, the vent must be open to the atmosphere and protected from animal intrusion.
What is the function of this item?
A typical septic tank is equipped with clean out access covers that are strategically placed.
Maybe something as basic as a flat piece of concrete or stone will be sufficient, or maybe something more complex.
To be quite honest, I would have expected the contractor who dug the hole to be accountable for ensuring that the system was repaired and safe.
What should I do to solve it?
What store would I go to in order to acquire septic tank covers?
A few years ago, I had a beautiful new house built for me.
I have three plastic polylok lids, one of which is above ground and is for the pump.
I’d like to purchase risers so that I may build all three at a depth of around 6 inches below ground level.
What are the advantages and disadvantages.
Do you have any other suggestions?
I apologize for the lengthy post.
Sorry, but “True Bolt” isn’t a phrase I’m familiar with or associate with septic tank lids in any way.
Although this is not always the case, Mary, as the pumper may be able to access the entire tank bottom from a single opening depending on the tank’s size and shape; however, if your pumper is unable to do so from a single opening, you may want both openings opened to inspect the condition of the tank baffles.
There are two holes in my septic tank. Is it necessary to open both doors for a pump out?
Question:cannot find the manhole cover of the septic tank
(8th of August, 2014) “We’ve located the cesspool concrete lid (about 12 foot diameter), but after digging a 2 foot perimeter, we were unable to locate the manhole cover, which was required for an inspection.” vicki levin stated Help? My husband is becoming increasingly upset with the digging!
Reply:
If it’s a cesspool, rather than a septic tank, and it’s spherical, the access lid is normally located in the center of the container.
Question: how do i remove septic tank lid that is stuck
The entrance lid would normally be in the center of the cesspool, if it is in fact a cesspool rather than a septic tank, and it is spherical.
Reply:
Anon:WARNING: If the septic tank cover, lid, or access aperture has partially caved in or sank into the tank, the condition is extremely dangerous – an unsecure cover implies that someone might fall into the tank, which is generally lethal very quickly. Please keep everyone away from the septic tank area until such time as you have had the tank inspected and opened for additional inspection by a professional. Depending on the tank type and condition, lifting the lid may necessitate the use of a pry bar or wrecking bar, as well as a small portable winch (which is unusual).
Alternatively, consider the following:
Septic Pumping ProcedurePumper Truck Operation Articles
- PROCEDURE FOR SEPTIC TANK INSPECTION
- MISTAKES MADE IN SEPTIC TANK PUMPING
- PROCEDURE FOR SEPTIC TANK PUMPING
- PROCEDURE FOR INSPECTING SEPTIC TANKS
- MISTAKES MADE IN PUMPING SEPTIC TANKS
- PROCEDURE FOR INSPECTING SEPTIC TANKS
Suggested citation for this web page
HOW TO OPEN A SEPTIC TANK at Inspect a Tank An online encyclopedia of building environmental inspection, testing, diagnosis, repair, and issue preventive information is available at Apedia.com. Alternatively, have a look at this.
INDEX to RELATED ARTICLES:ARTICLE INDEX to SEPTIC SYSTEMS
Alternatives include asking a question or searching InspectApedia using the SEARCH BOXfound below.
Ask a Question or Search InspectApedia
Alternatives include asking a question or searching InspectApedia using the SEARCH BOX located below.
Technical ReviewersReferences
Citations can be shown or hidden by selecting Show or Hide Citations. InspectApedia.com is a publisher that provides references. Daniel Friedman is an American journalist and author.
Locating and Digging
For an extra cost, our highly trained specialists will find the Septic Tank lids for you. When excavation for your Septic Tank Lids is necessary, heavy equipment and specific precautions must be taken to safeguard your property and the surrounding area. When it comes to excavation of your Septic Tank Lids, our skilled Septic System Pumping and Repair Service personnel will do an excellent job, whether it is done manually or with a machine. Lids on septic tanks may be located electronically – It may be essential to find the Septic Tank lids electronically in some situations.
- The use of an electronic locator should only be done as a last option.
- For those who have opted to find and dig up the lids to their Septic Tank prior to their scheduled appointment, the accompanying information, photographs & diagrams may be useful in deciding where to begin digging if you do not already have risers (Highly Recommended) put on your tank lids.
- This will be decided by the age of your Septic System, the manufacturer of the tank, and the firm that built the Septic System, among other factors.
- It will aid you in finding the general placement of the Septic Tank itself if you have an As-Built.
- (If you have any questions, please do not hesitate to contact us for assistance.) The septic tank is typically situated roughly 5 feet away from the home, in line with the lowest bathroom or kitchen in the house.
Owner Darren McCullough has 20 years of expertise locating and digging septic tank lids, and it is as if he had X-Ray Vision to see exactly where the lid is located!
1975 and earlier (Single Compartment)
The most likely scenario is that your property was built during this time period and that the system has not been replaced. In this case, your Septic Tank will be a single compartment tank, as illustrated in the illustration below. (According to the picture below, this tank will have one main lid in the center and two smaller baffle lids on either end of the tank as depicted in the diagram below.) The main lid will be roughly 24′′ in diameter, and it will be either square or circular in shape.
Uncovering the baffle lids, as well as the main lid, will allow us to thoroughly clean the input and examine the condition of the outflow pipework.
1975 – 1980 to Present (Two Compartment)
Assuming your property was constructed around this time period, your Septic Tank is most likely a 2 compartment tank with a least of two 24′′ lids that must be opened in order to drain the tank. As shown in the first diagram below, this type of Septic Tank can have two main 24′′ lids that include baffle access within the big lids and a center crossover lid (crossover is not required to service the tank), while in the second diagram below, the tank will have two main 24′′ lids and two smaller Baffle lids at either end of the tank directly above the inlet and outlet baffles.
Because riser lids can be below the surface, you will be looking for fiberglass lids below the surface like the first and second pictures below.
1990 to Present (Presure Distribution System – Two Compartment Tank with Pump Tank)
Using a Pressure Distribution System, this tank will have only one primary lid, which will be positioned in the center of the vessel. If you are having your standard three-year Septic Tank Pumping Service performed, it is NOT essential to pump the pump tank, but it is important to pump the pump tank after every other Septic Tank Pumping service. It is necessary to find and uncover the Pump Tank if you are having a Real Estate Sale Inspection performed. When we are certifying a septic system for sale, we must pump out and examine the pump tank and effluent pump, among other things.
Because this Pressure System is elevated to the surface, digging is not required; nevertheless, if they were not, it would be difficult to locate the locations of all three lids.
We are here to assist you.
Give us a call Today…. 425-861-6978
Septic tanks are installed on certain properties, and it is a good idea to be aware of where your tank is located. The first stage will be to locate the septic tank lid, whether it is to prevent damage to the tank and drain field from heavy equipment, to locate the tank for excavating reasons, or to conduct a self-inspection of the septic tank.
We generally give this service to our customers while doing inspections or septic tank pumping, however we understand that some homeowners may prefer to discover it on their own. How to locate a septic tank lid on your own is outlined below.
Use the septic system plans if you have them.
The quickest and most straightforward method of locating a septic tank lid is to consult the original septic system drawings. The septic system drawings will include the position and dimensions of the tank in relation to the house. Simply measure the measurements of the septic tank lid using a measuring tape to determine where it is located. When it comes to septic system plans, it’s probable that your local board of health will have a copy if for some reason you don’t have access to them. It is common for the lid to be buried beneath the grass, necessitating some probing and digging.
The sewer pipe can be your guide to finding the septic tank lid.
Sometimes it’s difficult to locate septic tanks when using these blueprints, or you may not have a copy of your septic plans on hand. The sewer pipe in your basement is your next best chance if you can’t locate it. This is the pipe that transports all of the waste water from your home to the sewer. Take note of the location of the pipe in relation to the ground level. this will give you an idea of how deep your tank will be buried under the earth. In addition, you will need to determine how many feet the pipe is away from the inner corner of your residence.
Make your way to the location where you believe the drain pipe is exiting the building.
Use caution when opening a septic tank lid.
Opening the septic cover is the first step in checking the levels of your septic tank on your own if you’ve managed to discover it. Sitting septic tank covers, particularly the older concrete ones, are extremely heavy and difficult to shift. The cover may feature hooks or grips that make it simpler to raise, or you may need to use a tool such as a shovel as a lever to open it. Older septic tanks should be handled with caution since the lids of older septic tanks can grow unstable over time and are more prone to breaking.
A anyone falling into this tank, especially a child or a pet, would be in grave danger.
Because the exposed hole in the ground might be easily missed, never leave the open tank alone, even for a little moment of reflection.
Measure the Levels of Your Septic Tank Yourself
It is necessary to open the lid of your septic tank first if you have identified it in order to check the levels in your septic tank on your own. Sitting septic tank covers, particularly the earlier concrete models, are extremely heavy and difficult to shift. You may see hooks or handles on the cover that make it simpler to lift, or you may have to use a tool such as a shovel to act as a lever to open the container. Older septic tanks should be handled with caution since the lids of older septic tanks can grow unstable over time and are more prone to cracking and breaking.
A person falling into this tank, especially a youngster or a pet, might be fatal due to the 4-5 feet of water that surrounds it.
The best course of action is to contact a professional septic service company to remove the lid, which will help to prevent unpleasant gases from escaping and the possibility of someone falling into the tank from increasing.
Need help? Call Grant Septic Tech.
We are well aware that doing things oneself is not always simple or straightforward. But that is precisely why we are here! Our family has been in the septic system business for more than 60 years, and we’ve seen just about everything. Alternatively, if you’ve had difficulties with any of these processes (or simply want to avoid the mess), simply give us a call – we know where to look for a septic tank lid and can complete a comprehensive check for $127. There will be no fee for the inspection if we discover that your septic tank requires pumping while we are there; you will only be responsible for the cost of the septic tank pumping while we are there.
We provide service in a wide range of places around Massachusetts.
What you should expect when your septic tank needs pumping
The following are general recommendations: It is advised that you pump your septic tank every two to three years. The frequency with which you pump is determined by the volume of water you utilize. Generally speaking, the more individuals that use your septic system, the greater the increase in water flow. As a result, your septic tank will fill up more quickly, necessitating more regular pumping. It is likely that the septic tank will need to be pumped more frequently than every two to three years.
Choosing a certified pumper
We recommend that you identify your septic tank before contacting a pumping company. Here is a list of questions you should ask the pumper about their services that we recommend you ask:
- What is the approximate cost of the pump-out
- And Will additional gallons be charged if the septic tank has a capacity more than 1,000 gallons? Is it included in this price the expense of excavating to expose the septic tank lid(s)
- If not, do you charge by the foot or by the meter? How much do you charge to dig you out if you don’t have one
- Is there a charge for dumping costs included? Was it determined that this fee includes a visual check of the septic tank’s entrance and exit baffles? Do you charge an additional fee for cleaning the filter baffle? If a tank has not been properly maintained, is there an additional price for the additional water and time necessary to pump it out? (for example, pumped on a regular basis)
- Please specify the distance and elevation to where the Pumper’s vehicle will be stationed if you have a long distance to pump or if you will be pumping up a steep hill (for example, in your driveway or in the yard). The Pumper will decide whether or not the vehicle is capable of providing this sort of service. Is pumping the pump tank a frequent component of your routine maintenance? What is the cost of providing this service? It is recommended that a pump tank be pumped in addition to the septic tank, cleaned with water, and then dried with a blow dryer. If the pump tank is extremely full, you may be subject to an additional price.
Locating the septic tank
Once you’ve decided on a Pumper, you’ll need to locate the septic tank on your property. Most Pumpers will charge you for the time it takes to locate the tank and open the septic tank lid (s). You can do the necessary work to expose the septic tank lid(s) prior to the arrival of the Pumper. Ohio Public Health – advises that you have “risers” installed to make septic tank pumping and inspection visits easier and less time-consuming for the Pumper and for you. With locking gas tight lids linked to both the tank and the riser and access raised to the surface, there is no digging required every time the septic tank needs to be pumped.
It is likely that the majority of septic system Pumpers will be able to assist you.
Both compartments must be examined and pumped in order to meet the requirements.
If your septic system is equipped with an as-built (a map of your septic system), identifying the septic tank will be straightforward.
Find and download a copy of your as-built drawing from the internet. The following talents will be required by you or your Pumper if an as-built is not available: investigation
- If there is a crawl space, you may be able to locate the tank by determining where the plumbing exits the foundation wall and then using a probing bar to locate it. If you have a fiberglass or polyethylene tank, a probe bar is not suggested unless extreme caution is exercised when using the probe bar. Probing will only be effective if the tank is not more than 1 to 2 feet below the surface of the ground
- If there is no crawl space available, you may occasionally discover the tank by looking for the plumbing vents in the roof. A person who is walking behind the home and coming from a restroom can find themselves at the exit point of the sewage line that connects to the septic tank
Using an electronic detecting equipment may be essential if none of the above mentioned approaches prove successful. Some rental services contain a transmitter that may be flushed down the toilet and is detected by a receiving unit, which can be found in some rental services. In certain cases, drainfield location is the specialty of septic system contractors. See a list of septic system installers who are certified. As long as the tank is exposed, sketch a map depicting the location of the septic tank lid(s) in relation to the home and make a copy of the map for your records.
Pumping the septic tank
Before the Pumper begins the process of pumping out the tank, you may request that he measure the thickness of the scum and sludge layer layers on the inside of the tank. Using this method, you can determine the pace at which the particles collect in the tank, which will assist you in determining when it is necessary to have the septic tank pumped again. Pumping frequency will be in the range of 2 to 3 years for the vast majority of families. It doesn’t matter how often you pump your septic system; frequent inspections will provide you peace of mind that everything is in working order inside those tanks.
The septic tank Pumper should present you with a receipt that details the services that were done to your tank.
- You may request that the Pumper measure the thickness of the scum and sludge layer before beginning the process of pumping out the tank. The pace at which the solids collect in the tank may be determined this way, which will assist you in determining when the septic tank should be pumped again. When it comes to pumping frequency, the vast majority of families will fall between 2 and 3 years in length. It doesn’t matter how often you pump your sewage system
- Frequent inspections will give you peace of mind that everything is in working order inside those tanks! What you should know about checking your septic system An invoice should be issued to you by the septic tank Pumper, describing the services that were rendered. There should be the following on this receipt:
How to Remove a Septic Tank Lid
A septic tank lid is the section of the sewage tank that is located at the top of the tank. This lid must be removed at least once every several years in order to completely empty the tank. Every three to five years, depending on the size of the tank, a homeowner will need to have the septic tank pumped out and cleaned. Avoid allowing the tank to become overflowing, causing it to begin backing up into the home or overflowing out of the opening. The tank suffers serious damage as a result of this.
Step 1 – Locate Septic Tank
A septic tank lid is the section of the sewage tank that is located at the top of the tank. This lid must be removed at least once every several years in order to completely empty the tank. Every three to five years, depending on the size of the tank, a homeowner will need to have the septic tank pumped out and cleaned. Avoid allowing the tank to become overflowing, causing it to begin backing up into the home or overflowing out of the opening. The tank suffers serious damage as a result of this.
Step 2 – Dig Up Septic Tank Lid
A septic tank lid is the section of the sewage tank that is located at the top of the tank. This lid must be removed at least once every several years in order to completely empty the tank. Every three to five years, depending on the size of the tank, a homeowner will need to have the septic tank pumped out and cleaned. Avoid allowing the tank to become overflowing, causing it to begin backing up into the home or overflowing out of the opening.
The tank suffers serious damage as a result of this. Removing the lid is a simple procedure that may be completed before the pumping service arrives or whenever you wish to examine the contents of the container.
Step 3 – Pry Off Septic Tank Lid
The lid of the septic tank might be rather hefty, depending on the size of the tank. On all sides, it is a solid block of concrete that is perfectly flat. It could have a handle that you can pull on. Pry bars are required to remove the majority of septic tank lids from their resting positions. Set the prybar in the seam and push it down until it is secure. As the lid begins to rise out of the hole, have someone assist you in moving it to the side. Place the lid on the ground’s surface so that it is not in the path of the pumping vehicle.
How to Find Your Septic Tank Lid
Previous PostNext PostWhether you realize it or not, it is critical that you be aware of the position of your septic tank lid and the septic tank itself. Despite the fact that septic tanks are fairly huge, they can be difficult to identify, particularly if they have not been properly maintained over time. Continue reading to find out how to locate your septic tank lid.
Why It’s Good to Know Where to Find Your Septic Tank Lid
Knowing the location of your septic tank is a fantastic approach to spot septic tank problems as soon as they occur. Consider the following scenario: If you saw water near your septic tank lid, you would know right away that you could have a problem with your system being overloaded with waste. Furthermore, by understanding where your septic tank is located, you may avoid parking cars on top of it, which might cause the tank to collapse and create flooding. You’ll also be able to point service personnel in the right direction for septic tank services, which will eventually save them time and money while also saving you money.
How to Find Your Septic Tank Opening
Knowing how critical it is to know where your septic tank lid is located, it’s time to go out and find one for yourself. Keep an eye out for a circular lid that is roughly two feet in diameter during your quest. Septic tank lids are normally constructed of green or black plastic, however they can occasionally be made of concrete. It is not always simple to locate the septic tank lid, however, because untidy vegetation, mud, or debris might obscure the lid’s location. If you live in a snowy climate, seek for a spot of lawn where the snow melts more quickly than it does anywhere else on the property.
How to Find Your Septic Tank Lid as a New Homeowner
During the process of purchasing your house, you should have been provided with a map of your property that showed the location of your septic tank. This is normally included as a part of your home inspection service package. All you have to do from there is compare the diagram to your land, find the septic tank location, and potentially dig around it to check whether the lid has been hidden by vegetation or other obstructions. People have been known to place an object such as a huge rock on top of the septic lid, so be sure to look beneath landscaping stones as well.
How to Find Your Septic Tank Lid as an Existing Homeowner
Still having trouble locating your septic tank lid? There’s a significant probability it’ll end up in the ground. The pipes coming from your basement should be followed, as they will take you in the direction of your septic system, which is what we propose. Then, once you’ve determined the correct direction, check for any high or low points in the yard that might reveal the location of your septic tank. You can find the lid of your septic tank by probing the ground with a metal probe every few feet with the probe.
Because most lids have a metal handle or fastener on them to hold the lid closed, you may also use a metal detector to find them.
The majority of lids are buried up to a foot deep, but some lids might be buried as deep as four feet in extreme cases! In some instances, a professional with specialized locating equipment may be required.
How to Maintain Your Septic Tank Lid
Even after searching for it, you can’t seem to find it. Possibly, it will be buried in the ground. The pipes coming from your basement should be followed, as they will lead you in the direction of your septic system, which is what you want. As soon as you’ve determined the direction, check around the yard for any high or low points that might reveal the location of your septic tank. Poking the earth every few feet with a metal probe can help you locate the lid of your septic tank. On average, lids may be buried up to a foot deep, so be sure to look for any lumps that may suggest that anything is hidden beneath the surface.
It’s possible that you won’t be able to find your lid because of the depth to which it was submerged.
In some instances, a professional with specialized locator equipment may be required.
- Keeping the grass around the septic tank lid regularly mowed is important. Remove any dirt or debris that may have accumulated on your septic tank lid
- Mark the area to ensure that no one parks or constructs structures there. It is possible to do this using a flag, garden décor, or ornamental pebbles.
Professional Septic Tank Services
Is it difficult to find trustworthy septic tank services or septic tank installation? If you are looking for septic tank installation, inspection, and cleaning services, check with your local Mr. Rooter ® Plumbing franchise. Mr. Rooter charges a set amount up front, with no overtime fees or additional expenses. To get started, call us at (855) 982-2028 or fill out our online estimate request form. Is the lid of your septic tank obscured by grass? Inquire with The Grounds Guys about routine lawn care and upkeep.
Rooter, is a member of Neighborly’s network of dependable home service experts, which includes Mr.
By hiring The Grounds Guys to provide trustworthy grass mowing and landscape care services, you can be assured that your septic tank lid will always be simple to locate.