How To Clen Septic Tank Filter Brush? (Solution found)

  • Either hold the filter over the inlet side of the septic tank and spray it with a hose or dip it in a bucket of water. Make sure all the solids fall back into the tank or bucket. When you are finished rinsing, pour any waste back into the tank.

How often should a septic tank filter be cleaned?

As a rule of thumb, you should always clean the septic tank filter when doing your routine pumping. But since this will typically be after a couple of years, you should inspect the filter twice a year – just before winter and right after winter. It is best to use a filter that has an alarm.

Why does my septic tank filter keep clogging?

A properly working septic tank outlet filter will become clogged as effluent is filtered and leaves the septic tank. As the solid materials accumulate over time, they progressively clog more and more of the filter, requiring maintenance. They should also be cleaned when you get the tank pumped and cleaned.

How do you get sludge out of a septic tank?

How to Reduce Sludge in a Septic Tank Without Pumping

  1. Install an aeration system with diffused air in your septic tank.
  2. Break up any compacted sludge.
  3. Add a bio-activator or microbe blend.
  4. Maintain the aeration system.
  5. Add additional Microbes as required.

How do you tell if your septic tank is full?

Here are some of the most common warning signs that you have a full septic tank:

  1. Your Drains Are Taking Forever.
  2. Standing Water Over Your Septic Tank.
  3. Bad Smells Coming From Your Yard.
  4. You Hear Gurgling Water.
  5. You Have A Sewage Backup.
  6. How often should you empty your septic tank?

Why is my septic tank filling up so fast?

If your tank seems to be filling up much more quickly, it could indicate a problem with one of its components, or it could be a sign that your tank is taking on more liquids than it can handle. Call a local professional if your tank is needing more septic pumping than usual.

Do I really need a septic tank filter?

The answer to the question “Do I need a septic tank filter?” is two-sided. Your septic will function normally without an effluent or wastewater filter. However, if your intentions are to reduce premature repair and replacement of the leach field, then you should definitely install an effluent/wastewater filter.

Are septic tank filters necessary?

Proper septic tanks should be fitted with an effluent filter or tank outlet filter. This is installed in the outlet of the tank and helps prevent anything other than liquid getting into the leach field (or clogging the outlet pipe).

What is an effluent filter?

Effluent filters are devices that can be affixed to outlets of septic tank and grease trap as pictured at right (Figure 1). The filter is a primary screening barrier designed to reduce the volume of solids passing out of the tank and through to the soil absorption system (SAS).

What to do after septic is pumped?

After you have had your septic tank pumped by a trusted septic company, there are some things you can and should do as the septic system owner.

  1. 1) Get on a Schedule.
  2. 2) Take Care of the System.
  3. 3) Know the Parts of Your System.
  4. 4) Check Other Possible Issues.

Where is the filter in my septic system?

Most septic tank filters are located inside of the baffle of the tank. For this reason the filters are very important, since they help regulate the flow to the area of drainage. The septic tank filters are very important in situations where waste is actually being delivered from the septic tank to the drainage area.

How do I know if my septic filter is clogged?

Signs of a Clogged Septic Tank Filter or Graywater Filter

  1. Sluggish drainage.
  2. Gurgling noises at building sinks or tubs.
  3. High effluent levels in the septic tank.
  4. Dirty septic filter.
  5. Drainfield abnormally dry.
  6. Septic filter monitors.

How do I keep my septic system healthy?

Do’s and Don’ts when maintaining your septic system

  1. Regularly inspect and maintain your septic system.
  2. Pump your septic tank as needed.
  3. Keep your septic tank lids closed and secured.
  4. Be water-wise.
  5. Direct water from land and roof drains away from the drainfield.
  6. Landscape with love.
  7. Keep septic tank lids easily accessible.

How to Clean Your Septic Systems Filter

Six months have flown by, isn’t it amazing how fast time passes? Following these nine simple steps will allow you to clean your filter when it is necessary! Let’s get this party started.

Need extra help? Watch Curtis from our parent company explain how to do this via video:

Wow, isn’t it wonderful how quickly six months has passed us by? If it is necessary to clean your filter, you may do it by following these nine simple steps! Let’s get this party going!

  1. Excellent performance in terms of oxygenation
  2. Non-toxic, non-clogging, and non-bundling properties
  3. Lightweight, simple to use, and simple to clean
  4. Hang up fast and easily, and take down quickly and easily
  5. Has a longer service life than any other filter medium due to its corrosion resistance. The filament’s structure and characteristics are of world-class quality

Ⅰ.Product Description

We can create a one-of-a-kind Septic Tank Filter Brush based on your specifications such as size, filament, color, shaft, and so on.

Ⅲ. Product Manufacture Flow

To use, just connect the Septic Tank Filter Brush to a vertical T located on one side of the septic tank or sewage treatment plant. The brush will then filter up to 70 percent of the suspended particles from the tank or treatment plant’s output side. This brush serves as a baffle; the bristles are firm enough to suspend solid material and permits effluent to reach the soakaway while keeping solid waste contained within the septic tank. AOQUNSeptic Tank Filter Brush is available in two sizes. As a result, the solid waste will not block the septic tank’s filtration system and cause it to malfunction.

Incredibly quick and straightforward, the installation of theSeptic Tank Filter Brushis completed in minutes.

Frequently Asked Questions

Our Septic System FAQ page is designed to provide answers to many of the more frequently asked concerns about septic systems. If you have a question that is not answered here, please do not hesitate to contact us and we will do our best to answer it as soon as possible.

  • What exactly is a Septic System as-built
  • What is the best way to locate the position of my septic tank lids and other septic system components
  • What effect would saving water have on my septic system? The following items should not be disposed of in your septic system: Can I use my garbage disposal in conjunction with my septic system? What does it indicate when my drains are slow
  • What should I do if my septic system is backing up
  • And other questions. What should I do if the power goes out and my septic system is dependent on a pump
  • Is it necessary to install a filter in my septic tank? How often should I clean the filter in my septic tank? Can I have the lids of my septic tank placed so that they are flush with the surface of the ground? How do I know what it means when my septic alarm goes off
  • Are you obligated to get your Septic System assessed if you are planning to sell your home? Are there any restrictions on planting over my drain field or reserved drain field? Is it legal for me to drive or park on my drain field? Was the drain field replaced, and how big was the reserve area? Does using additives reduce the frequency with which I have to pump my septic tank
  • The frequency with which I should empty my septic tank and pump tank
  • The expense of a new septic system or drain field
  • And the frequency with which I should empty my pump tank Exactly what is the difference between a drain field and a leach field
  • Where can I locate a Septic designer
  • And other questions.

What exactly is a Septic System as-built? It is a drawing of your Septic System that shows the position of the various septic system components in relation to the various structures on the site. The SepticAsbuilt is normally finished after the Septic System is installed or repaired by the Septic Designer or Installer, which is typically when the Septic System is constructed. return to the top of the page What is the best way to locate the position of my septic tank lids and other septic system components?

  • In most circumstances, your local Health District will have an Asbuilt design available for you to review.
  • Utilize the resources offered to connect with the local Health Department in your county and then proceed as directed by the instructions to locate your Septic Affidavit.
  • If there is a design on file, look through it to see where the lids or other components that you need to identify are located.
  • Then you may use a metal rod to probe the ground in a grid pattern, looking for the tank if you can’t find it immediately.
  • If there are any more components that need to be discovered, we can locate them as well, using methods such as probing, electrical locating, and other approaches.
  • Yes, lowering your water use will aid in extending the life of your septic system and ensuring that it continues to function effectively.
  • This quantity varies depending on the kind of soil and the number of bedrooms in the house being constructed.

Septic systems should never be used to dispose of goods that are toxic or hazardous to the environment.

Please see the link below for a printable document including a detailed list of these products as well as alternative Septic System maintenance procedures.

Although it is not suggested to use your waste disposal, many new houses are equipped with one at the time of construction.

A waste disposal should also be installed, and its filter should be cleaned on a regular basis, as the installation of a garbage disposal will cause the effluent filter to become clogged more frequently.

Slow drains might be one of the first signs that your septic system is having problems, and they can be quite frustrating.

It is advised that you contact us, and we would be happy to assist you with troubleshooting your system.

If your septic system is backing up, you should immediately turn off all water to the house and contact a professional for assistance.

In any case, we can assist you in getting your system back on track.

If your septic system is powered by one or more pumps, you should be cautious about how much water you use whenever the electricity goes out.

See also:  How To Deal With An Old Septic Tank? (Solved)

For scenarios like as power outages, certain older systems, on the other hand, may only have a limited amount of storage space.

If this is the case, it is usually a good idea to contact someone as soon as the alarm has been hushed.

return to the top of the page Should I put in a filter in my septic tank to keep the odors down?

The use of a filter considerably decreases the amount of sediments that would otherwise block the drain field, hence extending the life of the septic tank.

Most manufacturers recommend that you clean the effluent filter in your Septic Tank once every six months to ensure that it operates properly.

It is usually advisable to perform some regular filter cleaning to keep the septic tank from backing up into the home and causing flooding.

Yes, adding lids that rise to the surface, commonly known as “risers,” is incredibly beneficial in keeping your septic system in good working condition.

They also make cleaning the filter in the Septic Tank (if one is installed) a matter of minutes rather than hours.

return to the top of the page The sound of my Septic Alarm indicates that something is wrong.

If you find yourself in this position, you should get your septic system tested right away.

In any case, it should most likely be evaluated as soon as possible in order to avoid a potential backlog or to avoid incurring further expenses.

return to the top of the page I’m getting ready to put my house on the market; do I need to get my septic system assessed first?

With a few exceptions, King County mandates that every property sale or transfer be subjected to a mandated inspection, which may be found here.

However, virtually all lenders need a home inspection before approving a loan and finalizing the transaction.

return to the top of the page Are there any restrictions on planting over my drain field or reserve drain field?

Generally speaking, if the reserve drain field has never been de-brushed, it is absolutely OK to keep it as is.

Over time, plants and trees will become aware of the nutrient-rich effluent that is being released into your drain field and sprout roots either in the drain field or around the components, preventing the effluent from dispersing correctly.

return to the top of the page Is it legal for me to drive or park on my drain field?

The majority of the time, there is no long-term harm to light automobiles under extremely limited scenarios.

return to the top of the page Was the drain field replaced or was there a backup plan in place?

Although the reserve area is not necessarily the only location where a replacement drain field may be installed, it is the area that was chosen as a result of a variety of considerations at the time of the initial design.

Yes, even if you use additives, you will still need to pump your septic tank on a regular schedule.

In rare cases, additives may be beneficial, but in the majority of Septic Systems, there are enough bacteria present naturally that they are not required.

The frequency with which your Septic Tank has to be pumped might vary based on a number of factors, including the size of your home, the size of your Septic Tank, how often you use your trash disposal, the age of your Septic System, and other considerations.

return to the top of the page How often should I empty the contents of my Pump Tank?

On average, most homeowners using Pump Tanks should pump their septic tanks roughly every third time they do so.

return to the top of the page What is the cost of a new Septic System / drain field installation?

Despite the fact that each system is custom-designed for its specific location, there is a standard range of septic system and drain field expenses.

Prices might vary greatly depending on whether the property is an existing home in need of renovation or a vacant piece of land with no structure on it.

Installation of a new system normally costs between $8,000 and $30,000.

Although there can always be exceptions to these costs, both on the high and low ends of the spectrum, this can at the very least provide a general idea of what the costs might be in a given situation.

The area where a septic system’s waste is disposed of is referred to as a drain field or a leach field, among other names.

The soil is typically the final step in the process of cleaning and removing contaminants from water before it is returned to the environment as a freshwater source.

We have a number of septic designers with whom we collaborate on a regular basis.

In certain cases, depending on where you live and the circumstance you are in, there may be a designer who is more appropriate for your needs. Please do not hesitate to contact us if you require a reference depending on your circumstances. return to the top of the page

Bristle Filters

The term “Septic As-Built” refers to a system that has already been constructed. It is a drawing of your Septic System that shows the position of the various septic system components in relation to the various structures on your property. It is customary for the SepticAsbuilt to be performed after the Septic System has been constructed or renovated by the Septic Designer or Septic Installer. returning to the beginning of the page Can you tell me where my septic tank lids, as well as the position of the other components, are located?

  1. The majority of the time, your local Health District will have an Asbuilt drawing accessible.
  2. Utilize the resources offered to connect with the local Health Department in your county and then go as directed by the instructions to locate your Septic Affordability.
  3. If there is no drawing on file, you can try starting from the crawl space to figure out which side of the house the pipe leaves the foundation and working your way up from there.
  4. A radio transmitter that is flushed down the toilet may be used to locate the Septic Tank, and then we can follow the signal to find it.
  5. returning to the beginning of the page If I lower the amount of water I use, would this benefit my septic tank?
  6. A precise volume of water is required for each septic system when it is first constructed.
  7. returning to the beginning of the page How do I know which materials should not be disposed of in my septic tank?
  8. Glycol, pharmaceuticals, paint, oils, gasoline, solvents (including feminine hygiene products), napkins, paper towels (including flushable wipes), and flushable cat litter are just a few of the goods that fall into this category.
  9. Even though it is not advisable to use your garbage disposal, many newer homes are equipped with one as part of the construction process.

Because the usage of a trash disposal will cause the effluent filter to clog up more frequently, it is also essential to ensure that you have an effluent filter installed and that you clean it on a regular basis returning to the beginning of the page It’s a mystery to me why my drains are running slowly.

  • There can be a variety of problems with your septic system, the most frequent of which are a septic tank that needs to be pumped or a filter that needs to be cleaned.
  • returning to the beginning of the page Why is my septic system backing up and what should I do about it?
  • A backed-up septic system may be caused by one or more of the following problems: a blocked or damaged main line, a clogged effluent filter, or even a failed drain field.
  • returning to the beginning of the page My septic system is powered by a pump, so what should I do if the electricity goes out?
  • The components of the system should include some form of storage capacity.
  • Once electricity has been restored, it is not uncommon for an alarm to go off.
  • In addition, depending on the type of system you have in your house, we may give you with extra information on how to deal with the problem.

To be sure, a filter is strongly suggested for practically every sort of system, even centralized systems.

returning to the beginning of the page If I have a septic tank, how frequently should I clean the filter?

In addition to the kind of filter, home size, and personal hygiene practices, cleaning intervals might vary based on a number of other variables.

returning to the beginning of the page It it possible for me to have the lids of my septic tank erected above ground.

Moreover, they make cleaning the filter (if one is installed) in the Septic Tank a matter of minutes rather than hours.

returning to the beginning of the page The sound of my Septic Alarm indicates something is wrong.

An elevated water level in the pump chamber is often indicated by the Septic Alarm.

A low water level or a servicing issue with one or more of the installed components might also trigger an alert on certain modern systems.

To get your system back on track, please do not hesitate to contact us.

Inspections at the time of sale are subject to varying criteria depending on where you live and in which county you live.

A property sale or transfer in Snohomish County is not required to be inspected at the time of sale or transfer.

It is usually a good idea to have the inspection conducted far in advance of any closing date to ensure that if any repairs are required, they may be handled without jeopardizing the sale of your home.

a.

For reserves that have never been de-brushed, it is usually completely acceptable to retain them in their natural state.

Over time, plants and trees will become aware of the nutrient-rich effluent that is being released into your drain field and sprout roots either in the drain field or around its components, preventing the effluent from dispersing effectively.

returning to the beginning of the page Is it legal for me to drive or park in my drain field?

The majority of the time, there is no long-term harm to light automobiles in extremely restricted scenarios.

This depends on the components that were utilized in your system.

a.

Although the reserve area is not necessarily the only location where a replacement drain field may be installed, it is the area that was chosen as a result of a variety of circumstances at the time of the original design.

See also:  Where Do You Buy A Septic Tank? (Solved)

Using additives will not reduce the frequency with which you must do septic tank pumping.

Even though additives may be beneficial in certain circumstances, they are not usually required in most septic systems since there is sufficient bacteria present naturally.

Several factors, such as the size of the family, the size of the Septic Tank, the use of a trash disposal, the age of the Septic System, and occasionally other effects, might impact how frequently your Septic Tank has to be pumped.

returning to the beginning of the page Can you tell me how often I should drain my Pump Tank?

Generally speaking, the majority of families using Pump Tanks should pump their septic tanks every third or fourth time they do so.

returning to the beginning of the page In what range does a new sewage treatment system or a new drain field fall?

A typical range of septic system and drain field expenses may be found even if each system is custom-designed for its specific location.

The expenses might vary greatly depending on whether the property is an existing home in need of renovation or a bare piece of land.

New systems cost anywhere from $8,000 to $30,000, depending on the location and soil conditions where they are being built.

returning to the beginning of the page When it comes to drain fields and leach fields, what is the difference between them?

These two terms relate to the same thing: subsurface drains, which are where the wastewater from your house is channeled away from your property.

returning to the beginning of the page A septic designer might be found at your local library or online.

If you are looking for a suggestion for a septic designer, we would be happy to supply you with a list of many names to consider.

Depending on where you live and the circumstance you are in, there may be a designer who is more appropriate for your needs. Contact us if you would like to get a reference based on your specific situation. returning to the beginning of the page

  • Installation is simple just about anyplace, even square baffles. Even in difficult-to-reach areas, it is simple and cost-effective to maintain
  • When employing a maintenance sleeve, there is no need to pump out the tank. Excellent filtration for solids, such as toilet paper, hair, lint, and other such debris
  • The bristles self-lock into place, preventing the filter from floating up. Because the trash is separated by size, the filter has a longer life span. Allows for the biological maturation that is required in wastewater treatment systems. Long-lasting enough to be machine-washable, yet inexpensive enough to be throwaway
  • Suitable for usage in residential, commercial, and other settings
  • And Available in four different diameters: 4″, 6″, 7″, and 8″.

4 inch filter in baffle

Patent No. 6,811,692 in the United States and Patent No. 2,412,742 in Canada

Made in the USA

The Benefits of Using a Maintenance Sleeve When the filter is removed, the STF-130 maintenance sleeve is inserted into the tank’s outlet to cut off flow, preventing built-up solids and unfiltered effluent from escaping the tank. This implies that the septic tank owner will not be required to pay to have their tank drained every time the filter is serviced, as previously (though tanks should be pumped on a regular basis for optimum performance). The system is always protected, even when the filter is being repaired or examined, which is another benefit of this configuration.

To build the handle, just cut a section of 1/2″ PVC tubing to the required length.

Maintenance

It is versatile enough to be used in virtually any application. A fairly popular application is square concrete baffles, which are quite widespread in the construction industry. You may use our filters in the square, oval, or just about any other shaped baffle that is now in the tank rather than chiseling the concrete baffle out of the tank and installing a plastic baffle. This is true as long as the concrete baffle is not degraded. This type of baffle is commonly 5 inches square, and our 7 inch red filter performs an excellent job of filling this space.

In a 5 inch square baffle, this is approximately 7 inches across the diagonal.

7 inch filter in 5 inch square baffle

Applications in the Commercial Sector Sim/Tech bristle filters are available in a variety of sizes, each of which is rated for a particular maximum flow rate. When it comes to high-volume commercial applications, large filters can be employed, and/or many filters can be manifolded together to achieve the desired flow rate. There are four sizes of filters available, with maximum flow rates in gallons per day of 4″ (1800), 6″ (3,000), 7″ (4,000), and 8″ (6,000). (5,000).

Color Coded sizes

Design Polypropylene bristles are used in conjunction with a 316 low carbon stainless steel core to provide the filter’s non-directional appearance. As a result of the contoured design of the filter, a debris separation area is created, which naturally separates debris into different sizes and masses. This area also guarantees that the filter is used evenly during its entire lifespan. MaintenanceIntervals will vary based on a variety of elements such as water use, soap usage, waste disposals, and so on and so forth.

It should be changed about every 50,000 gallons of sewage to provide optimal protection.

Click through the gallery below to see Sim/Tech products in the field and more.

Maintenance of the Bristle Filter Performing maintenance on a bristle filter. This is the standard appearance. When the water level was below the baffle, the brilliant yellow on top indicated that it never rose over it.

Disposal of Bristle Filters Upon receipt, each filter is packaged in a plastic bag, which may be used to dispose of the filter or to clean and check the filter before re-using it. Filter that was clogged by a malfunctioning system This filter is the dirtiest we have ever seen, and we have seen a lot of filters. It is quite probable that the drain-field would not survive long if the filter were not in place, and this septic system is in need of an update to accommodate the high strength flow of the home, which may include adding retention and aerobic treatment, among other things.

This is the standard appearance.

How to properly wash your septic tank filter

If everything goes according to plan, only wastewater from the tank should be sent into the drain field. The wastewater, on the other hand, has the potential to transport additional undesirable material such as hair, solid debris, and grit into the drain field. When this type of material enters the leach field, it causes bottlenecks and pollution to occur. This emphasizes the need of an aseptic tank filtration system. Typically, the septic tank filter is housed within the baffle of the septic tank, and it is responsible for filtering out any suspended particles from the wastewater before it is discharged into the drainage system.

Failure to clean the filter on a regular basis might result in major blockage and other associated problems, which can be costly to repair.

If nothing else, the filter should be cleaned on a regular basis, such as after every tank pumping.

Steps to follow when cleaning the septic tank filter

Before you begin cleaning the filter, make certain that you are properly attired, including full-length pants and a shirt, safety goggles, gloves, and boots. Following that, you may proceed to clean the filter by following the procedures outlined below:

  1. Prepare yourself by dressing in full-length pants and a shirt, as well as safety goggles, gloves, and boots, before beginning to clean the filter. Following that, you may proceed to clean the filter by following the procedures outlined below.

Tip: Keep a maintenance book/file where you may write the date of the inspection as well as any other essential notes so that you can refer to them in the future.

Keeping the septic tank clean

Tip: Keep a maintenance book/file where you may record the date of the inspection as well as any other essential notes so that you can go back to them in the future.

Conclusion

In general, when doing normal pumping, it is recommended that you clean the septic tank filter. However, because this will normally occur after a couple of years, you should check the filter twice a year — shortly before winter and immediately after winter. It is preferable to utilize a filter that has an alert built into it. This alarm is set to sound anytime the filter needs to be cleaned, and it is programmed to do so. If you clean the filter on a regular basis and take proper care of it, it should last you for many years without requiring replacement or repair.

Septic Tank Exit Filters

This study discovered that a filter installed in the septic tank’s exit baffle collects a significant amount of the solids floating in the septic tank when the effluent is transported to the downstream dosage tank or the absorption area distribution system. Whenever fresh sewage is released from a residence into an underground septic tank, an equivalent volume of mostly liquid effluent is discharged from the septic tank to a downstream unit. The downstream unit in most on-lot systems is either a secondary treatment filter, such as a sand or peat filter, a dosage tank, or a gravity-fed absorption area, depending on the configuration.

As long as septic tanks are suitably sized, they are effective in physically separating the particles from the liquids.

As a result, the settling process is an imprecise activity that frequently results in some particles remaining partially suspended in the central zone of the septic tank after it has finished.

Figure 1 shows a cross-section through a single-chamber septic tank with an exit filter (or screen) positioned in the tank’s exit baffle, which acts as the final opportunity to trap and remove these partly settled particles.

Common Exit Filters

Septic tank exit filters are typically available in two different forms. The majority of exit filters are made of plastic and have microscopic holes in them, which are meant to trap particles that make it through the filter (see Figure 2). The second form of exit filter resembles a brush that has been put into a section of pipe (see Figure 3). Both of these exit filters can be removed by opening the exit observation port and removing (or lifting) the filter insert out of the exit observation port.

Screen Filters Made of Plastic (Fig.

Summary

A septic tank’s discharge quality has been increased by the installation of exit filters within the tank’s exit baffles. The improved quality of wastewater has been passed on to the unit downstream. You should have an exit filter put in your septic tank the next time you have it pumped if it does not already have one. The exit filter will increase the usable life of your absorption area by a significant amount. If you want further assistance, you should contact your local Sewage Enforcement Officer or Extension Education Specialist.

See also:  What Happens If A Septic Tank Is Not Holding Water? (Solution found)

The Pennsylvania Septage Management Association (PSMA) is located at Box 144 in Bethlehem, Pennsylvania 18016 and may be reached at 717-763-PSMA.

Amazon.com: SimTech 4″ Septic Tank Bristle Filter – STF-110 – (Filter Only) : Pet Supplies

A septic tank’s discharge quality has been enhanced by the installation of exit filters within the tank’s exit baffles, which are then discharged to the following unit downstream. You should have an exit filter placed in your septic tank the next time you have it pumped if you don’t already have one. You will get more usage out of your absorption area if you have an exit filter installed. Alternatively, you can contact your local Sewage Enforcement Officer or Extension Educator for extra assistance.

Septic System Care and Maintenance

A septic tank’s discharge quality has been enhanced by the installation of exit filters within the tank’s exit baffles, which are then discharged to the next unit downstream. Having an exit filter placed in your septic tank should be done the following time you have your tank drained. The exit filter will increase the usable life of your absorption area by a factor of two. If you want further help, please contact your local Sewage Enforcement Officer or Extension Educator for assistance. The Pennsylvania Association of Sewage Enforcement Officers (PASEO) is located at 4902 Carlisle pike268 in Mechanicsburg, Pennsylvania 17050 and can be reached at 717-761-8648.

The Pennsylvania Septage Management Association (PSMA) is located at Box 144 in Bethlehem, Pennsylvania 18016 and may be reached at (717) 763-PSMA.

Conserve Water

The most important thing a homeowner can do to keep their domestic sewage treatment system in good working order is to use less water. A domestic home’s sewage system is intended to manage 50–60 gallons per person per day of household sewage, according to the manufacturer. The addition of more water than the system is designed to handle might cause the system to fail. Water conservation strategies such as the ones listed below can be implemented:

  • A homeowner’s best bet for keeping their residential sewage treatment system in good working order is to use less water. A private home’s sewage system is intended to manage 50–60 gallons per person per day of domestic sewage. Overloading a system by adding more water than it was designed to handle might cause it to fail completely. Techniques for conserving water include the ones listed below:

Landscape Carefully

The septic system for the home is buried in the yard, which means that even seemingly innocuous landscape alterations might cause significant harm to the septic system. Make a note of the system’s placement and use caution when making upgrades to the property. The following recommendations will assist you in extending the life of your system:

  • Rainwater drainage should be diverted away from the soil absorption system region. Extra water can be sent to the location where wastewater is being processed and distributed by a variety of means, including downspouts, paved surfaces, and slopes. In a typical septic system, a yard receives an additional 100 inches of water each year in addition to what is normally received. Additionally, Ohio receives an average of 40 inches of precipitation each year, which is above average. Please keep the soil absorption system area free of solid things such as pavement, decks, automobiles, heavy equipment, and other similar structures. Heavy things can flatten the soil and block off bigger soil pores, reducing the quantity of water that can pass through the soil and into the surrounding environment. If the system is covered, access for maintenance and repair is similarly restricted
  • Do not lay extra soil fill on top of the system to improve access. In order to allow for air infiltration, several of the system components are designed to be shallow. The use of fill to cover up sewage that has surfaced in a yard will not fix the problem and may even make the situation worse in some cases. The presence of sewage on the surface indicates that the system is not operating properly and requires repair or replacement.

Pump the Septic Tank and Clean the Filter

Typically, septic tanks (Figure 1) are erected to separate and store particles from sewage, which helps to prevent blockage of the soil and other treatment system components. Solids can migrate out of the tank and cause harm to the system if they are not maintained on a regular basis. Include the following septic tank upkeep in your budget:

  • Pump the septic tank on a regular basis to keep it running smoothly. Table 1 depicts the expected time required for septic tank pumping for various tank sizes and family sizes
  • And Tank pumping should not be substituted with biological or chemical additions in any situation. Because sewage contains sufficient bacteria and enzymes, the use of chemicals is unnecessary and, in some situations, detrimental. Do not dispose of rubbish using a garbage disposal. Solids accumulate in the tank, increasing the expense and frequency of maintenance
  • As a result, the tank becomes overflowing. The condition of the baffles or tees (Figure 1) should be checked after the tank has been pumped. Baffles and tees are used to increase the removal and retention of particles in a filtration system. Depending on the amount of time passed, they may crumble or fall off, or they may be accidently damaged when pumping. You should remove and clean your effluent filter on a regular basis (6–12 months, depending on how often you use it) if your tank is equipped with one to aid in the collection and retention of solids. Use a hose to clean the filter, allowing the sediments to be washed back into the septic tank after cleaning. The filter may be cleaned with a spray bottle filled with water and a few drops of detergent if a hose is not available (Figure 2). Cleaning a significantly blocked filter may necessitate the use of a brush in a pail of soapy water. Easy future maintenance is made possible by rigging from the tank ports to the ground surface (Figure 1). Protect the tank lid from damage caused by the mower and replace any damaged lids. Always keep the lids closed to prevent children and pets from getting into the tank. Never go into a septic tank unless absolutely necessary. The septic tank emits hazardous fumes that may kill a person in a matter of minutes if they are not properly maintained. If someone has unintentionally fallen into the tank, contact 911 and then place a fan on top of the tank to allow fresh air to circulate.
Table 1.Estimated Septic Tank Pumping Frequency (in Years) for Different Size Tanks (Note: If a garbage disposal is used, more frequent pumping is required.)(Mancl, K. 1984. Estimating Septic Tank Pumping Frequency.J. of the Environmental Engineering DivisionASCE. 110(1):283-285.)
Tank Size (gallons) Number of People in Household (Year-Round Residence)
1 2 3 4 5 6 7 8 9
500 5.8 2.6 1.5 1 0.7 0.4 0.3 0.2 0.1
750 9.1 4.2 2.6 1.8 1.3 1 0.7 0.6 0.4
1,000 12.4 5.9 3.7 2.6 2.0 1.5 1.2 1 0.8
1,500 18.9 9.1 5.9 4.2 3.3 2.6 2.1 1.8 1.5
2,000 25.4 12.4 8 5.9 4.5 3.7 3.1 2.6 2.2
2,500 31.9 15.6 10.2 7.5 5.9 4.8 4.4 4 3.0

Professional Management

Only a small number of households are capable of operating and maintaining a wastewater treatment system. This service is available in Ohio only through professional service providers. The providers are required to be registered with the local health department and to participate in yearly continuing education opportunities. An yearly examination combined with a minimal bit of maintenance can prevent a total system failure that would need an expensive and cumbersome system replacement in the majority of domestic sewage systems.

Septic Tank Filters

With septic tank systems, one of the most common problems is that their soakaways become clogged with suspended particles that have been transported out of the septic tank outlet and into the soakaway itself. These particles gradually degrade the soil porosity, resulting in the failure of the soakaway. Most nations across the globe, with the exception of the United Kingdom and Ireland, filter final effluent before it is discharged from a septic tank or sewage treatment facility. A septic filter, such as the DrainXTM Septic Filter, is installed in the vertical part of the ‘T’ on the outlet pipe from our two chamber septic tank.

  1. A septic tank filter requires no energy and little maintenance; all you have to do is pull it out of the tank by the handle, clean it with a hosepipe, and push it back in – it’s that simple!
  2. What the Filter Does and How It Works Every year, tens of thousands of unprotected septic systems collapse.
  3. A minor investment in an effluent filter can help you avoid having to make costly repairs to your septic system.
  4. This filter guides the outgoing effluent through either a series of extremely small holes that prohibit anything larger than 1/16th of an inch from exiting the tank, or bristles that tend to capture anything larger than 1/16th of an inch.

It also promotes the development of millions of aerobic bacteria throughout its matrix, which aid in the subsequent digestion of the organic stuff present in the aqueous environment.

Slot or DrainX Filter?

However, they do not trap as many small solids as the DrainX filters and do not trap hair at all. The Slot filter forces effluent to flow through a series of narrow slots, and the patent-pending flow design reduces the trapping of solids in the filter by allowing them to slough off and fall back into the tank for further digestion. DrainX filters are far more effective in trapping suspended particles, and they prevent all hair and lint fibers from exiting the tank and clogging the soakaway system.

The Filter Range

The collection includes filters ideal for single-family homes as well as filters capable of treating up to 20,000 litres of water per day in commercial settings.

Price

DrainX Filter is 110mm in diameter and costs £45 + VAT. It is exclusively available from Sapphire Environmental Ltd. septic tank Filters. Call the number 01759 369582. Septic tank filters keep your pricey soakaway from being contaminated.

Leave a Comment

Your email address will not be published. Required fields are marked *